smart office

7
Smart office I AE&I Department, GEC Kozhikode SMART OFFICE MINI PROJECT ROUGH REPORT Submitted by PRASOBH D. (GCAJEAE041) SREEYESH N.P. (GCAJEAE055) NIDHIN P. (GCAJEAEO37) VIVEK GANGATHARAN (GCAJEAE064) Department of Applied Electronics & Instrumentation Engineering GOVERNMENT ENGINEERING COLLEGE KOZHIKODE-673 005 JUNE 2012

Upload: arun-babu

Post on 29-Sep-2015

9 views

Category:

Documents


4 download

DESCRIPTION

project describing the design and implementation of an automatic room control system with arduino development board, ir sensor and temperature sensor.

TRANSCRIPT

  • Smart office I

    AE&I Department, GEC Kozhikode

    SMART OFFICE

    MINI PROJECT ROUGH REPORT

    Submitted by

    PRASOBH D. (GCAJEAE041)

    SREEYESH N.P. (GCAJEAE055)

    NIDHIN P. (GCAJEAEO37)

    VIVEK GANGATHARAN (GCAJEAE064)

    Department of Applied Electronics & Instrumentation

    Engineering

    GOVERNMENT ENGINEERING COLLEGE

    KOZHIKODE-673 005

    JUNE 2012

  • Smart office II

    AE&I Department, GEC Kozhikode

    CERTIFICATE

    GOVERNMENT ENGINEERING COLLEGE

    KOZHIKODE-673005

    Department of Applied Electronics & Instrumentation

    Engineering

    This is to certify that this is the bonafide record of mini project titled SMART

    OFFICE done by PRASOBH D., VIVEK, NIDHIN and SREEYESH during the academic

    year 2011-2012 for partial fulfillment of requirement for award of degree of bachelor of

    technology, AE & I engineering of University of Calicut.

    Mr. Abdu Rahiman V Dr. Abdul Hameed Ms.Greeshma M.

    (Project Coordinator) (Project Coordinator) (Project Coordinator)

    Associate Professor Professor & Head Assistant Professor

    Dept. of AE & I Engg. Dept. of AE & I Engg. Dept. of AE & I Engg

    GEC Kozhikode GEC Kozhikode GEC Kozhikode

  • Smart office III

    AE&I Department, GEC Kozhikode

    ACKNOWLEDGEMENT

    This mini project will be incomplete without mentioning all the people who helped us to

    make it possible, whose gratitude and encouragement were invaluable.

    We would like to thank Mrs. Agnes Jacob (Asso. Professor, AE & I) for her support and

    guidance throughout our work. We also thank Dr. Abdul Hameed (Professor & Head, Dept.

    of AE & I) and for his valuable words of advice.

    We would express our sincere gratitude to Mr. Jithesh (Asst. Professor, AE & I) and Mrs.

    Reena (Asso. Professor, AE & I) for their guidance and encouragement.

    We are also thankful to all lecturers in our Department and all students of our class for their

    support and suggestions.

    We would thank the Almighty, our supreme guide for bestowing his blessings upon us in this

    endeavor.

  • Smart office IV

    AE&I Department, GEC Kozhikode

    ABSTRACT

    This project is one, which has a major part to play in the real world today meeting all

    the electronic applications in an office.

    The major attractions of the project titled SMART OFFICE are,

    Counting of the number of person in a Room.

    Room temperature display.

    Temperature controlled Fan.

    Light detector.

    The counter section counts the total number of persons inside a room. The counter

    automatically increments when a person newly enters the room and also it get decremented as

    a person leaves the room. The counter counts from 0 according to the number of persons

    entered into the room. Here the counting is just configured for having only a maximum of

    100 people in the room and if necessary can be increased to any level.

    The intelligence of the system automatically shuts down the light and fan inside the

    room when the last person leaves the room security. Also the fan in the room works

    according to the room temperature. That means if the room temperature is greater than 30

    degree Celsius , the fan automatically turns ON. The light in the room automatically turns

    ON, when there is insufficient light in the room.

  • Smart office V

    AE&I Department, GEC Kozhikode

    CONTENTS

    1. Acknowledgementiii

    2. Abstract.iv

    3. Contents.v

    4. List of figures....vi

    Chapters

    1) Introduction.....1

    2) Design and development.2

    3) Block diagram.3

    4) Circuit diagram...4

    a) Working5

    5) Circuit description

    a) Power supply6

    b) Counting section..7

    c) Auto light control.....8

    d) Temperature section.8

    e) Motor driver and relay..9

    f) Liquid crystal display...10

    g) Microcontroller12

    6) Software

    a) Program....14

    b) Software description.19

    c) Basics of arduino board20

    7) Conclusion..22

    8) Result..23

    5. Reference24

  • Smart office VI

    AE&I Department, GEC Kozhikode

    LIST OF FIGURES

    1. ARDUINO BOARD

    2. BLOCK DIAGRAM

    3. CIRCUIT DIAGRAM..

    4. POWER SUPPLY

    5. IR CIRCUIT

    6. LM35

    7. ULN2003 PIN DIAGRAM

    8. ULN2003 SCHEMATIC

    9. LCD CONNECTOR

    10. ARDUINO BASIC

    11. ARDUINO SCHEMATICS

    12. SOFTWARE GIU

    13. CREATE A NEW PROJECT

  • Smart office VII

    AE&I Department, GEC Kozhikode