SMART PARKING is a packaged rotary parking system that can expand parking capacity up to 8 times more on tight and limited space constraint in most of urban areas in the world.

There are more than 400 units of SMART PARKING in Korea. And over 100 units of SMART PARKING have been installed in major cities of Russia, Estonia, Kazakhstan, Singapore, Iran, Bulgaria, Romania and Czech etc.

It is our sincere hope to serve solutions for better parking environments in urban areas as well as to cooperate mutually with all of our clients and partners.

Advantages of SMART PARKING

• Small footprint SMART PARKING requires a tight space of only 2 parking lots

• Expandable up to 8 times of parking capacity Max. 16 cars can be parked only in a space for 2 cars

• Easy to operate By pressing on the touch screen or by contacting an RFID card

• Safety devices Four photo sensors at front, rear and both sides. Warning lamp, overrun stopper and falling prevention device by double guide mechanism

• Various configurations SMART PARKING is available in many configurations and sizes to accommodate 4 to 16 cars

• Endurance Over 15 years of service life and operative at temperature ranging -40 C° to +45 C°

• Low noise and very low vibration Low noise level (65 ~ 75 dB). SMART PARKING runs more silently and smoothly than any other types of parking equipment

• Low running cost Due to the straight forward design and rotational motion only, SMART PARKING rarely causes troubles. The process of periodic maintenance is very simple. Also, low power consumption

• Quick installation as packaged type Normally, the installation of SMART PARKING completes in 3 days only

• No need of underground pit for installation

• No attendant operator is required Intuitive operation panel, no attendant is required

• Relocation of SMART PARKING Due to the packaged system, SMART PARKING can be reinstalled in a new location.

03

04

Particulars

Shelter (optional)

Pallet guide

Guide Frame

Facade

Pallete

Mirror

Fence

Control panel

Main chain

Main frame

Geared motor

Drive unit(inside)

Entrance board

External turn tableEnables to turn your directions in a limited parking area.

Easy to useNo need of pit for installation

Driving motorSEW helical bevel geared motors with high efficiency levels in both torque directions and high-endurance gearing.The right-angle drives, long and maintenance-free service lives

Control panel Standard panel for simple use

Advanced panel for use of RF cards

PalletHighly endurable color coated

05

Options

Facade

Touch ScreenRFID card control

LED display

Retractable side step

CCTV

Auto lubricating device

External turn table

Auto sliding door

High speed system by inverter control

CE certificate(SM-L series) M8A 10 0260033002, TUV, GermanyCE certificate(SM-Lex series) M8A 10 0260033003, TUV, GermanyCE certificate(SM-SU series) M8A 10 0260033004, TUV, Germany

GOST certificate (SM-L, M series) POCC KR.AR04.B00961,POCC, Russia

KTSA certificate (SM8-8) Youngdeungpo, Seoul 1-13, KTSA, KoreaKTSA certificate (SM6SU) Youngdeungpo, Seoul 1-15, KTSA, KoreaKTSA certificate (SM8) Seoul 1-36, KTSA, KoreaKTSA certificate (SM8) Seoul 1-27, KTSA, KoreaKTSA certificate (SM8) Seoul 1-33, KTSA, KoreaKTSA certificate (SM10) Youngdeungpo, Seoul 1-14, KTSA, KoreaKTSA certificate (SM14) Youngdeungpo, Seoul 1-9, KTSA, KoreaKTSA certificate (SM14) Youngdeungpo, Seoul 1-10, KTSA, KoreaKTSA certificate (SM16L) Youngdeungpo, Seoul 1-11, KTSA, KoreaKTSA certificate (SM16LT) Youngdeungpo, Seoul 1-33, KTSA, Korea

Patent PCT/KR2006/004841 WO2008/06000A1, WIPOPatent Korea 10-0485605, KIPO, KoreaPatent Korea 20-0326138, KIPO, KoreaPatent Korea 0308440, KIPO, KoreaTrademark Korea 40-0624853, KIPO, Korea

6,370 Required length

SIDE ELEVATION

5,970 CL. of column

PLAN

FRONT VIEW

5,050 Required width

3,080

4,850CL. of column

6,370

5,970

SM12L

5,05

0 R

equi

red

wid

th

3,08

0

4,85

0C

L. o

f col

umn

SM6L

8,03

0

06

L series

SM8L SM10L SM12L SM14L SM16L

9,85

0 11,6

80

13,5

00

15,4

00

17,2

00

Specification - L seriesSM6L SM8L SM10L SM12L SM14L SM16L

6 8 10 12 14 16

System DimensionLength(mm) 6,370 6,370 6,370 6,370 6,370 6,370Width(mm) 4,850 4,850 4,850 4,850 4,850 4,850Height(mm) 8,030 9,850 11,680 13,500 15,400 17,200

Net weight(ton) 15.7 16.5 18.3 22.0 24.0 26.6

Available car

Length(mm) 5,200 5,200 5,200 5,200 5,200 5,200Width(mm) 2,100 2,100 2,100 2,100 2,100 2,100Height(mm) 1,600 1,600 1,600 1,600 1,600 1,600Weight(Kgf) 2,150 2,150 2,150 2,150 2,150 2,150

5.5 7.5 7.5 7.5 11 15Direct Drive Direct Drive Direct Drive Direct Drive Direct Drive Inverter control

5~8Motor controlSpeed (m/min.)Available temperature rangeNoiseElectric power source

Model No.Parking Capacity (cars)

3.1~4.2 3.6~4.2

Safety devices

-40°C ~ +45°C65 ~ 75dB

AC380V, 3PH, 50/60Hz

Photo sensors at the front part and rear part in the entrancePhoto sensors at both side for car door openingOver current relay for motor protectionEmergency stop deviceOverrun stopper on the palletCar falling prevention device (tie bolting system for main chain holder)Car falling prevention device (double guide rail)

Geared Motor(Kw)

07

CE certificate(SM-L series) M8A 10 0260033002, TUV, GermanyCE certificate(SM-Lex series) M8A 10 0260033003, TUV, GermanyCE certificate(SM-SU series) M8A 10 0260033004, TUV, Germany

GOST certificate (SM-L, M series) POCC KR.AR04.B00961,POCC, Russia

KTSA certificate (SM8-8) Youngdeungpo, Seoul 1-13, KTSA, KoreaKTSA certificate (SM6SU) Youngdeungpo, Seoul 1-15, KTSA, KoreaKTSA certificate (SM8) Seoul 1-36, KTSA, KoreaKTSA certificate (SM8) Seoul 1-27, KTSA, KoreaKTSA certificate (SM8) Seoul 1-33, KTSA, KoreaKTSA certificate (SM10) Youngdeungpo, Seoul 1-14, KTSA, KoreaKTSA certificate (SM14) Youngdeungpo, Seoul 1-9, KTSA, KoreaKTSA certificate (SM14) Youngdeungpo, Seoul 1-10, KTSA, KoreaKTSA certificate (SM16L) Youngdeungpo, Seoul 1-11, KTSA, KoreaKTSA certificate (SM16LT) Youngdeungpo, Seoul 1-33, KTSA, Korea

Patent PCT/KR2006/004841 WO2008/06000A1, WIPOPatent Korea 10-0485605, KIPO, KoreaPatent Korea 20-0326138, KIPO, KoreaPatent Korea 0308440, KIPO, KoreaTrademark Korea 40-0624853, KIPO, Korea

SIDE ELEVATION

PLAN

6,370

5,970

5,30

0 R

equi

red

wid

th

3,08

0

5,10

0C

L. o

f col

umn

6,370 Required length

5,970 CL. of column

SM7SU

10,1

30

9,20

0

SM6SUFRONT VIEW

5,300 Required width

3,080

5,100CL. of column

SM12SU

08

SU series

SM8SU SM9SU SM10SU SM11SU SM12SU

11,2

60

13,3

10

13,4

00

14,3

70

15,5

00

Specification - SU seriesSM6SU SM7SU SM8SU SM9SU SM10SU SM11SU SM12SU

6 7 8 9 10 11 12Length(mm) 6,370 6,370 6,370 6,370 6,370 6370 6,370Width(mm) 5,100 5,100 5,100 5,100 5,100 5,100 5,100Height(mm) 9,200 10,130 11,260 13,310 13,400 14,370 15,500

Net weight(ton) 19 19.5 20 21 22 23.3 25Length(mm) 5,200 5,200 5,200 5,200 5,200 5,200 5,200Width(mm) 2,100 2,100 2,100 2,100 2,100 2,100 2,100Height(mm) 1,900 1,900 1,900 1,900 1,900 1,900 1,900Weight(Kgf) 2,400 2,400 2,400 2,400 2,400 2,400 2,400

7.5 7.5 9.2 9.2 9.2 11 11Direct Drive Direct Drive Direct Drive Direct Drive Direct Drive Direct Drive Inverter control

Safety devices

Photo sensors at the front part and rear part in the entrancePhoto sensors at both side for car door openingOver current relay for motor protectionEmergency stop deviceOverrun stopper on the palletCar falling prevention device (Tie bolting system for main chain holder)Car falling prevention device (Double guide rail)

Available car

System Dimension

4~5Available temperature range -40°C ~ +45°CNoise 65 ~ 75dBElectric power source AC380V, 3PH, 50/60Hz

Model No.Parking Capacity (cars)

Geared Motor(Kw)Motor controlSpeed (m/min.)

09

MAIN POWER

B

380V 3PH 50HZ 7KW~15KW

FL±0

EMBED CONDUIT PIPEFOR ELECTRIC POWER(Ø60 STEEL PIPE OR PVC CONDUIT)

CABLE NEEDS 2 METERS FROM FLOORCABLE : REFER TO THE TABLE of ‘POWER CABLES’

600

5300

Ø150 DRAIN PIPE

Ø34 CONDUIT FOR TURN TABLE

MAIN POWER

B

FL±0

FL±0

FL-100

FL-230

Ø150FD

CONDUIT FOR SENSORS(Ø50 FLEXIB LE CONDUIT)

FL±0FL±0

FL±0

FL±0

(Ø60 PVC CONDUIT)

EMB ED CONDUIT PIPEFOR ELECTRIC POWER

FL±0

D

Ø150 DRAIN PIPE Ø150 FD

FL±0

FL±0 FL±0

Foundation (Basic type)

Foundation (Turntable type)

10

Foundation / Turntable

800 800

M24 ANCHOR BOLT

CENTER OF COLUMN

CEN

TER

OF

CO

LUM

N

GAUGE PLATE

300

300

DETAIL “A” (TYP.)

D

FL±0

SECTION

D

PLAN

DETAIL “A”

“A”

“A”

“B” “B”

3050

600

800 800

DETAIL “A”

“A”

“A”

“B” “B”

5000

600

“C”

100

Ø4500

“C”

“X”

2700 1850

850

“X”

700

SECTION “X” - ”X”

SECTION

100

230

M24 ANCHOR BOLT

CENTER OF COLUMN

CEN

TER

OF

CO

LUM

N

GAUGE PLATE

300

300

DETAIL “A” (TYP.)

TURN TABLE

S

D

S

380V 3PH 50HZ 7KW~15KWCABLE NEEDS 2 METERS FROM FLOORCABLE : REFER TO THE TABLE of ‘POWER CABLES’

Power cablesType Cables

5.5Kw7.5Kw9.2Kw11.0Kw

CV 8SQ. 4C + 1ECV 10SQ. 4C + 1ECV 14SQ. 4C + 1E

CV 6SQ. 4C + 1E

15.0Kw CV 16SQ. 4C + 1E

CAUTION

Minimum ground strength (bearing pressure) shall be 15 ton per square meter for full area of foundation

Vertical load per columnSM6L SM8L SM10L SM12L SM14L SM16L SM6SU SM7SU SM8SU SM9SU SM10SU SM11SU SM12SU

LOAD(TONf) 8.4 10.0 12.0 13.5 15.3 9.8 11.5 13.5LOAD(KN) 82.6 97.5 117.1 132.5 149.5 96.0 112.7 131.8

7.270.1

8.4 9.1 10.6 12.5122.5103.988.981.8

DimensionSM6L SM8L SM10L SM12L SM14L SM16L SM6SU SM7SU SM8SU SM9SU SM10SU SM11SU SM12SU

B 3080 3080 3080 3080 3080 3080 3080 3080 3080 3080 3080 3080 3080D 5970 5970 5970 5970 5970 5970 5970 5970 5970 5970 5970 5970 5970S 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7 6717.7E 200 350 500 600 750 300 450 600F 350 500 650 750 900 450 600 750350 450 450 550 700

300300 55040020023

0

10

700

700150

Ø4000 (TURN TABLE)

Ø4200 (DIA. OF PIT)

2700

FL±0

FL±0

FL-100

Ø34 PVC CONDUIT PIPE(UNDERGROUND)

Ø150 PVC PIPEFOR DRAIN(UNDERGROUNDED)

Turntable

Technical SpecificationsTYPE NPT400M NPT400L

Max. Load 2000 2500Driving SystemSpeedDiameter of TableMotor Output 0.4Kw x 4P 0.75Kw x 4PRotation DirectionPower 380/220V 3PH 50/60Hz

1.3 RPMFr. Roll Drive

4000

CW or CCW Direction (360°)

11

100

FL-230

M24 X 450L ANCHOR W/ B.N.WOR, CHEMICAL ANCHOR W/B.N.W

F

GRAVEL

BASE CONCRETE

EARTH

GAUGE PLATES

Ø16 RE-BAR P150

E

Ø16 RE-BAR P400

Ø16 RE-BAR P500FL±0Ø16 RE-BAR P150

BASE CONCRETE

GRAVEL

E F

FL±0Ø16 RE-BAR P400

Ø16 RE-BAR P500

EARTH

(Ø34 STEEL PIPE OR PVC CONDUIT)

(Ø50 FLEXIBLE CONDUIT)FL±0

CONDUIT FOR ELECTRIC POWER

CONDUIT FOR SENSORS

SECTION “A” - “A” SECTION “B” - “B” SECTION “C” - “C”

800450300

600450

100

VA

R.

VA

R.

100

VA

R.

VA

R.

150

3515

0

150

12

10100 (10600)

6300

5050

(530

0)

6300 6300

5050

(530

0)

3000

5050 (5300)

6300

6300 8100

14400

5050

(530

0)

5050

(530

0)

12300

6300 6000

3000

475

5050 (5300)

SU seriesL series

Typical layouts

K building, SeoulMusong building, SeoulJinyoung building, Seoul

Gimpo Factory

Factory 1, Manufacture of pallets

Factory 2, Manufacture of frames

13

GANGHWA

NUSAN FORKED ROAD

GANGHWA

WEST INCHEON

SEOUL(OLYMPIC HIGHWAY)

DAEREUNGLI DAEBYEKRI

YANGGOK DETOUR CROSSROAD

DYPC FACTORY

SEOUL

DAEMYONG PORTSANGMARI

CHOJI BRIDGE

SANGMA FORKEDROAD

HUIMANG SHOP

Factory overview

14

Sector6, Romania

SNEC, Singapore

Sector6, Romania

Moscow, Russia

Lubertsy, Russia

Mashad, Iran

Typical reference project - Overseas

15

District4, Iran

District4, Iran

District4, IranDistrict4, Iran

District4, Iran

16

Ekaterinburg, Russia

Moscow, Russia Moscow, Russia

Lubertsy, Russia

Typical reference project - Overseas

17

Isang building, Seoul

Hyangnamu building, Seoul

Daehyun building, Kyonggido

Ilsong building, Seoul

Jisung building, Seoul

Sunin building, Seoul

Domestic - Basic type

East apgujong, Seoul

New world restaurant, Seoul

Yohan building Seoul

Hanol building Seoul

Daekwang building, Seoul

18

Typical reference project - Facade (Shelter top)

19

Yonsei building, Incheon

Munbaedong building, Seoul

Motae hospital, Seoul

Saehan building, Seoul

Y building, Seoul

Namyang building, Seoul

Facade (Cladding)

20

K building, Seoul

Plus media, Seoul

Boram hospital, Incheon Venis tower, Seoul

Seogyo building, Seoul

Jungmin building, Seoul

Dongjin building, Seoul

Typical reference project - Facade (Full cladding)

21

Company Registration Certificate of Inno-Biz Cert. of Company Lab. Recommendation Letter

Registration of patent Reg. of Trademark Registration of patent Registration of patent

CE certificate GOST certificate(Russia)ISO9001:2000

Certifcates and Registrations

Austria Bahrain Canada

Bulgaria India United State

Cyprus Iran Costarica

Czech Singapore Panama

Denmark Saudi Arabia Pueto Rico

Estonia Iraq

Greece Syria

Hungary Oman

Latvia UAE

Lituania Qatar

Kazakhstan

Norway

Romania

Russia

Serbia

Spain

Turkey

Ukraine

EUROPE ASIA NORTH AMERICA

22

Overseas partners

23

Argentina New Zealand Libya

Paraguay Egypt

Uruguay

Peru

Colombia

SOUTH AMERICA OCEANIA AFRICA

* The technical data and illustrations are subject to change for improvement without any notice

B413 Woolim Lions Valley,18 Yangpyeong-dong 5ga, Yungdeungpo-gu, Seoul, KoreaTEL : +82-2-2638-7750~2FAX : +82-2-2638-7753www.dysmart.comdypc01@empal.com

149-3 Sangma-ri, Daegot-myon, Gimpo city, Kyonggi-do, KoreaTEL : +82-31-988-3765

OFFICE :

FACTORY :