smart prox dcx · 2014. 1. 24. · smart prox dcx features & options • proximity (hid,...
TRANSCRIPT
Smart Prox DCX
Features & Options
• Proximity (HID, Farpointe, Iclass, PIV-II,
Mifare, Indala)
• Character masking (insertion & deletion)
• 1,2, or 3 Magnetic Stripe Tracks
• Infrared or visible optics
• 5V, 12V, or 24V operation (fixed mount)
• 9V battery operation (portable)
• Networking
• Date and time stamping
• Good read beep
• Compatbile commands with DC series
• Power over ethernet
• Weatherproofing
• Reads Kronos & CAC cards
• Portable version available
Interfaces
• Rs232
• TCP / IP
• Rs422
• USB
International Barcode 160 Oak St. Glastonbury, CT 06033 phone: 860.659.9660 fax: 860.657.3860 e-mail: [email protected] web: http://interbar.com
The Smart Prox DCX is a data collection reader supporting any combination of proximity,Iclass,barcode, and magstripe reading. Available in fixed mount or portable versions, both versions are capa-ble of storing over 100,000 transactions. The portable version is especially conve-nient for collecting attendance at training classes. The fixed mount version can be wall mounted for time and attendance, or general data collection applications. Fixed Mount versions are available with Tcp/ip and POE.
Fixed Mount or Portable Data Collection Swipe Reader
Wiring Wiring Connections for various Interfaces.
Rs232 Interface
Red +VDC
Blue GND
Green Reader Transmit
Yellow Reader Receive
Rs422 Interface
Red +VDC
Blue GND
Green Reader Transmit +
White Reader Transmit -
Yellow Reader Receive +
Orange Reader Receive -
Tcp
RJ45
Reading Direction: Bi-directional
Symbologies: Code 39, I 2 of 5, 2 of 5, IND 2 of 5, Code 128, Codabar, EAN13, UPCA
Resolution: 5 mil
Magnetic Stripe Tracks 1,2, or 3 (high or low density, high or low co
RF HID, Farpointe (pyramid), Iclass, Mifare, PIV-II, HID Long, Indala
Interfaces: Rs232, Rs422/485, TCP / IP, USB
Good Read Beep: Programmable
Slot Width: 0.050” (1.27mm)
Power Consumption1: 5V 150mA typical 250 max / 12V 90mA typical 140 max / 24V 45mA typical 80 max / POE 90mA
Material: Black polycarbonate / Noryl (chemical resistant case) (optional)
Dimensions: 4.6” L x 2.4” W x 1.4” H (11.68cm L x 6.10cm W x 3.56cm H)
Weight 7oz (198.5g)
Read Height: .4” standard (1.02cm) / .465 (1.19cm) (optional)
Indicators 2 programmable LEDs
Light Source: 630nm visible / 940nm infrared
Temperature -40°C to +85°C
Standard Wiring (Fixed): 3ft (91.5cm) cable with DB9 female (RS232), flying leads (RS422) or RJ45 (TCP / IP)
Standard Wiring (Port.): 3ft cable with jack
Memory: 4mb
15V DC readers have a voltage tolerance of +/-5%. 12V DC readers may be operated from 8VDC–15VDC. 24V DC readers may be operated from 15V DC–30V DC.
Specifications
BARCODE OPTICS Visible – V Infrared – I
MAGNETIC STRIPE None - 0 Tracks 1&2 - 1 Track2 - 2 Tracks 2&3 - 3 Tracks 1,2, &3 - 4
PROXIMITY HID & Farpointe - H Iclass - I PIV-II - P Mifare S/N - M Indala - D
How to Order
Rs232 - Iclass Only
SPROX-DCX–00IS06R2
Smart Prox DCX with:
No barcode - 0
No magstripe - 0
Iclass - I
Rs232 – S
No Weatherproofing – 0
#6 Mounting – 6
Rear wire exit – R
12V DC supply – 2
Rs232 Portable, Prox
SPROX-DCX–00HS0BI
Smart Prox DCX with:
No barcode - 0
No magstripe 0
Proximity - H
Rs232 – S
No weatherproofing – 0
Portable ( No Mounting) – B
Internal battery – I
TCP / IP, Prox + Barcode
SPROX-DCX–I0HCW6R2
Smart Prox DCX with:
Infrared Barcode – I
No magstripe - 0
Proximity - H
TCP / IP Interface – C
Weatherproofing – W
#6 Mounting – 6
Rear wire exit – R
12V DC supply – 2
Order Smart Prox DCX with a code to indicate options required.
WEATHERPROOFIN
G*
SPROX-DCX –
OPTICS
INTERFA
CE1
VOLTAGE
2
MOUNTIN
G
WIR
ING
–
ADDITIO
NAL3
OPTIONS
Specify one letter for
each additional option.
Leave blank if no
additional options are
desired.
*Options at additional cost 1TCP / IP additional cost 212V, 24V &
POE additional cost 3Noryl additional cost
4Serial units may be reprogrammed for network / protocol mode.
5Weatherproofing not available with portable readers..
6Portable units do not have mounting inserts. When ordering portable units, always specify a B for the mounting.
7Only available with fixed mount units.
8Not available in portable versions.
Reserved for special
configurations or wiring.
Keep blank unless IBC
assigns you a code for
this field.
RESERVED
X
INTERFACE Rs232 – S4
Rs422 / 485 – 24,8
TCP / IP – C8
USB – U
WEATHERPROOFING5
No weatherproofing – 0
Weatherproofing – W5
MOUNTING #6 – 6 3mm – M Portable units – B6
WIRING - FIXED MOUNT Rear – R Side – S
WIRING - PORTABLE Internal battery (portable) – I Side internal jacks (portable) – J Internal battery / External AC – A
VOLTAGE - FIXED MOUNT 5V DC – 5 12V DC – 2 24V DC – 4 POE – P
VOLTAGE - PORTABLE PORTABLE - B
ADDITIONAL OPTIONS Noryl (chemical resistant case) – N7
8 character Alpha Display - D 0.465 read height for barcode (0.4 standard ) - 4
MAGNETIC
STRIP
E
PROXIMIT
Y / RF
Examples Examples of ordering codes for Smart Prox DCX in popular interfaces.
International Barcode 160 Oak St. Glastonbury, CT 06033 phone: 860.659.9660 fax: 860.657.3860 e-mail: [email protected] web: http://interbar.com
Dimensional Diagrams
Notes for Ordering Smart Prox DCX
Dimensional Measurements for the standard (non-portable) Smart Prox DCX.
1.36
6
(Rear exit wire)
4.655
2.370
0.61
4
TRUE R0.190
TRUE R0.190 TRUE R0.190
TRUE R0.190
4.655
0.450
0.558 0.5583.540
2.3281.24
0
1.20
5
2.44
5
0.1350.135
POWER
DCX series readers are powered with 5VDC.
12VDC and 24VDC are optional. Readers
can be ordered with a side wire exit or rear
wire exit. Power pigtails and an AC adaptor
can be provided for all 12V and 24V readers
that are ordered with flying leads. Custom
wiring is available for most configurations.
WIRING
Standard wiring for 5V RS232 and all RS422
readers is a 3’ cable with flying leads. 5V
RS232 readers can be ordered with a DB9
connector and power wired to one of the
pins. 12V and 24V RS232 readers contain a
3’ cable with a DB9 female connector, and a
power pigtail for connection to an AC adap-
tor; which is included. Standard wiring for
TCP readers is a 5’ cable with a RJ45 jack
and a RJ45 coupler. Standard wiring for USB
readers is a 6’ cable with a USB type A plug
for direct connection to a PC.
PORTABLE
Portable DCX readers can be ordered with a
DC power jack on the side, an internal 9-volt
battery housing, or both. When ordered with
a DC power jack, you can connect an AC
adaptor for power, or connect a 9 volt battery
using a short adapter cable. The AC adaptor
and cable are provided. If ordered with the
internal 9 volt battery housing, the reader is
powered by an internal replaceable 9-volt
battery. Readers may be ordered with both
options, allowing use with either the internal
battery, or AC adaptor. All portable versions
contain a jack for serial communications and
a serial cable is provided.
For custom wiring or firmware contact IBC.