smc 201 r (en)
DESCRIPTION
SMC 201 R machineTRANSCRIPT
Offset Wheel Trencher for the mechanical laying of networks
Process Tangentially driven trenching wheel designed by Marais
Specific Features Cutting outside the overall sizes of the machine : with mass transfer on opposite track : 350 mm
Constant and reduced width of the trench, Constant building cost per meter
Non-stop shielding of the cut trench : the laying unit, Preservation of the geometric data of the cut trench, Compliance with the bending radius of the cables and the ducts.
Quality of the trench bottom : the shoe. Smooth clean and compact trench bottom without any salient angle.
Network laying quality.Constant depth, Constant altimetry and planimetry of the laid network.
Assets Cutting of different grounds
Cutting configuration along roads in ditch bottom, behind safety barriers or along railways. Compliance with the bending radius of the cables and the ducts
Reduction in building costs
Innovations Driving seat platform mouted on the machine
Radio remote control
Central greasing
Low center of gravity
Output From 300 to 2,000 lm/day depending on the grounds,sections of trenches and nature of the network to be laid
Simultaneaous performance of trenches andmechanical laying for the deployment of networks(telecom, electricity, drainage, water, sanitation,gas, etc…)
MARA I SGROU P E
SMC 201 R
Features of the trenching tool Type : Marais tangentially driven trenching wheel
Working widths : 280, 300, 350 mm
Minimum depth : 0.50 m
Maximum depth : 1.40 m
Lateral offset of the tool outside the machine : 350 mmon the left and right side
Cutting tool mounted on a double pivot
Slope correction of the tool
Sizes and weight of the unit Length in working position : approx 16 m (with reel and fiber laying unit)
Length in transport position : approx 11 m
Width : 2.50 m
Height : 3.20 m
Weight : 27 tons
Motor drive system 475 HP (350 kW) diesel thermal motor
Technical diagram
Accessories Reel carrier in front of the machine(capacity : 5.2 tons)
Removable guardrails on the machine
Laying units : fiber optic, electricity, drainage, HDPE, root-proof screen, warning grid, cable tightener
Coating materials of networks : sand sprayer, concrete hopper with vibrating unit, excavated material screen, backfiller
Combs and guide rollers.SM
C_2
01R
_EN
G _
03/1
2 -
Spec
ifica
tions
as
show
n ar
e no
t bin
ding
to th
e m
anuf
actu
rer
and
may
be
chan
ged
with
out p
rior
not
ice.
The
equ
ipm
ent o
ffer
ed in
this
leafl
et c
an in
clud
e op
tiona
l fitt
ings
and
dev
ices
.
www.samarais.com
MARA I SGROU P E ZA Les Portes de l’Anjou
1, rue Pierre et Marie CURIE BP 20 - 49430 DURTAL (France)
Tél. : 33 (0)2 41 96 16 90 / Fax : 33 (0)2 41 96 16 99e-mail : [email protected]