So you wantto make slime...

...Let’s goo!

Thanks forbuying our ULTIMATESLIME KIT!

We hope youhave lots of fun getting creativewith your slime.You can use this manual as a guide to get started!

Before you get started,a parent or guardian

should read the safety information given at the

back of this booklet.

What’s in my Unicorn Slime Kit?

SlimeFl ies!

What did the slug sayas he slipped down the wall ?

BoraxGlue

2 MeasuringCups

4 LargeContainers

4 SmallContainers

Blue, Pink, Purple, and White Foam Balls

3 Stirring Sticks Tool Knife Set

4 ScentFlavoursClay

SnowPowderJellycubes

Blue, Pink, andPurple Flake Glitters Pearls 4 Ink Colors

Tips and Tricks PageUh oh! My slime isn’t looking quite right. What can I do?!

Don’t worry my slime making pals. We have loads of simple solutions to help you get back on track with your slime.

My color isn’t working right, it’s not mixing or it’s not bright enough.

I want a stretchier slime. How can I do that?

My slime is all wet and nasty. What’s wrong?

I left my slime for a day and now it’s dried up. Can I fix it?

I’ve mixed it but it doesn’t look like slime. How come?

Make sure to add the color BEFORE you add borax water. This will help to make sure the color gets mixed in correctly. If you need it to be brighter, you can always add a little more.

The are loads of ways you can make a stretchier slime. You can add shaving foam or hand lotion (not included). Sometimes slime goes hard when you add too much borax, so try adding a little less next time and working the slime more in your hands.

Sometimes if you get the ratio of glue or water a little bit wrong then your slime can be a little bit wet. There are two simple things you can do to fix this:1. Add a little bit more borax.2. Leave the slime to dry for 2 to 4 hours. This is best if there is too

much water.3. Sometimes the heat of your hands and playing with the slime is all it

needs. Get in there and get messy kneading your slime.

It’s difficult to revive a dead slime. The best thing to do is start again and have loads more fun making new slime. Remember to keep your slime in the containers provided to make sure it lasts a long time.

Sometimes slime needs to be worked with your hands a little bit before it turns into slime. So get stuck in and get messy! Keep trying and following our instructions you’ll be making perfect slime in no time.

S Q U I S H YC L A Y

M A K E S A S U P E R F U N

M A R S H M A L L O WS L I M E

S T Y L I N GY O U RS L I M E

T H E T O P T I P S

J E L L Y C U B E S M A K E

A NA W E S O M E C R U N C H Y

S L I M E

U S EP I G M E N T ST O M A K E M A G I C A L U N I C O R N C O L O R S !

S C E N T ST U R NY O U R

S L I M E I N T OD E L I C I O U S

S M E L L I N G G O O !

A D DG L I T T E RF L A K E S

F O R T H A TE X T R A

S P A R K L E !

Borax Water

Borax Water

30mlClear Glue

10mlClear Glue

10mlWhite Glue

30ml Water

Basic Slime 1A slightly stretchy

and firm slime

Basic SlimesThree best slimes to get you started!

Stir 10ml clear glue and 10ml white glue for 30 seconds.

Add 30ml water and mix for 1 minute.

Add a drop of boraxwater and mix for 30 seconds.

Knead.

Basic Slime 2 Wibbly jelly-like slime

that bounces

Add water to the borax bottle and mix.

Shake it to wake it!

Remember to make sure the borax water is fully mixed!

Shake before every use.

Borax Mixture

Add a few drops of borax water to 30ml clear glue, and stir for around 30 seconds or until the slime comes together.

If it is not sticking together, add another drop of borax water.

Knead in your hands to take away the last of the wetness.

Don’t add too much borax water

or your slim ewill go hard.

v

Cloud Slime Unicorns love this one!

Basic Slime1 or 2

SnowPowder

+50mlwater

Mix around 50ml water to 10ml snow powder. Slowly add this snow powder a little at a time to Basic Slime 1 or 2.

Mix together and add more until you reach your desired consistency.

Mix even amount of clear glue and water. Stir until it’s all mixed together evenly.

Slowly add your Borax water until the slime starts to come together.

Once mixed, leave slime in a sealed container for 3 days. Smaller slimes will become clear faster.

Borax Water

Clear Glue

Water

You can play with the clay by itself - it feels amazing! If it gets a little dry or you want to add some color, you can use the recipe below:

Mix 20ml warm water with your favourite ink color. Add more ink to make it really bright.

Knead it together with one bag of clay for about 3 to 5 minutes until all the water is gone (this is messy).

Fluffy Colored Clay SlimeA crazy slime that feels a little like a marshmallow!

Alternative: Add 2 to 3 squirts of shaving foam (not included in this kit) and kneed until all the foam is gone. It is super messy but super fun!

Ink Colorof Choice

Clay20mlWarm Water

Basic Clear SlimeCrystal clear slime that is glossy and stretchy!

Candyfloss Cloud SlimeSame as Cloud Slime but add a drop of candy scent, some snow powder, and pink ink color to Basic Slime 1 or 2.

Fishbowl Slime A fun crunchy slime

Foam Slime A bowl of cosmic fun!Add a few drops of Borax water to 30ml clear glue, and stir until the slime comes together.

Add foam balls.

If it is not sticking together, add another drop of Borax water.

Knead in your hands to take away the last of the wetness.

30mlClearGlue

BoraxWater

Jelly Cube SlimeA great sounding crunchy slime!

Bubblegum Jelly Cube SlimeSame as Jelly Cube Slime but add a drop of bubblegum scent and choice of colour to Basic Slime 1 or 2 before adding the foam cubes.

Optional: Add color to the foam cubes first. Simply mix a little pigment with a small amount of water and add the cubes. The longer you leave them in, the better the color will be. Then squeeze out all the excess water and let them dry (don’t forget this step or you will get a wet slime).

Make Basic Slime 1 or 2 and add in choice of ink color, glitter or scent.

Add a few at a time of foam cubes to the slime and fold them in. Do this when the slime is fresh so that they don’t fall out.

If the slime is too sticky, add more Borax water after putting the beads.

To have a clearer slime, leave the slime in an airtight container overnight.

Basic Slime1 or 2

FishbowlBeads

Make Basic Slime 1 or 2 and add in choice of ink color, glitter or scent.

Knead the slime until it is really stretchy. Don’t add too much Borax. Stickier slime will keep the beads in better.

Put your fishbowl beads into a bowl. Put the slime into the bowl and fold in as many beads as you can. To get a really crunchy effect, use a small amount of slime with lots of beads.

If the slime is too sticky, add more Borax water after putting the beads.

To have a clearer slime, leave the slime in an airtight container overnight.

Ink Color of ChoiceScentof Choice

Flake Glitters

Basic Slime1 or 2

FoamCubes

Ink Color of ChoiceScentof Choice

Flake Glitters

Foam Balls

Colorful Scented Glitter SlimesCreate the slime of your dreams!

Ink Colors

Bubblegum, Candy, Strawberry, and Vanilla

Scent Flavors

Flake Glitters

Any slime can be made intobright amazing colors with tonsof sparkle AND smell delicious!

Combine different inksto make nearly any color you like!

What can you come up with?

UsingYour

Slime Kit Safely

And finally, try to avoid the common disease known as “Slime Obsession”!

Full safety information is at the back of this book. Please make sure to read before using this kit.

Children should use this kit under the supervision of adults. The kit is not suitable for children under3 years old.

Keep contents of kit away from eyes and mouth. In case of contact, wash with plenty of water.

Always add colors, scent, or gl itters ju st before adding borax.All you need to do

is make sure they are stirred in real ly well.

PARENTS’ SECTION - READ BEFORE USEALWAYS SUPERVISE YOUR CHILDEN WHEN PLAYING WITH THIS KIT.DO NOT CONSUME ANY INGREDIENTS WITHIN THE KIT.

THIS PRODUCT IS NOT FOOD.

WARNING!! This kit is to be used solely under the strict supervision of adults that have read and fully understand the safety precautions given in the set. Not suitable for children under 36 months old. Use with care and only under adult supervision.

FULL SAFETY INFORMATIONAll ingredients in this kit should always be handled with care and never consumed or eaten. In case of contact with mouth or eyes, wash with water carefully. If in doubt, contact a physician immediately.

THE PRODUCT CONTAINS SMALL PARTS AND SHOULD BE KEPT AWAY FROM CHILDREN YOUNGER THAN 36 MONTHS.

PER ITEM SAFETY AND FIRST AID MEASURESHardening Agent (Borax) - Serious eye damage or eye irritation, category 2 - causes serious eye irritation.Prevention: Wash skin thoroughly after handling. Wear eye protection / face protection when there is the potential for exposure of the eyes to liquid.IF INHALED: Move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice or attention.IF ON SKIN: No first aid required. However, it is recommended that exposed areas are cleaned with soap and water after use. IF SWALLOWED: Obtain medical attention. Do not give milk or alcoholic beverages. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.Most important symptoms and effects, both acute and delayed: Signs and symptoms of exposure to this material through breathing, swallowing, and/or passage of the material through the skin may include: stomach or intestinal upset (nausea, vomiting, diarrhoea) irritation (nose, throat, airways), nose bleeding.Notes to physician: No hazards which require special first aid measures. Clay, Glue, Glitter, Color Ink: This is NOT considered hazardous under the GHS classification. In case of inhalation, skin contact, eye contact, or swallowing, please follow the standard first aid measures outlined below.

STANDARD FIRST AID MEASURESGeneral advice: No hazards which require special first aid measures.IF INHALED: Move person into fresh air. If unconscious, place in recovery position and seek medical advice. If symptoms persist, call a physician.IF IN EYES: Flush with water as a precaution. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists: get medical advice/attention.IF ON SKIN: No first aid required. However, it is recommended that exposed areas are cleaned with soap and water after use.IF SWALLOWED: Rinse with water. Never give anything by mouth to an unconscious person. If symptoms persist, call a physician.Most important symptoms and effects, both acute and delayed: None known or anticipated symptom.Notes to physician: No hazards which require special first aid measures.

HANDLING AND STORAGEDo not breathe vapours or mist. Avoid contact with eyes. Do not smoke. Smoking, eating, and drinking should be prohibited in the application area.

DISPOSAL Dispose of in accordance with all applicable local, state, and federal regulations. Do not dispose of waste into sewer. Do not contaminate ponds, waterways, or ditches with chemical or used container.

DESIGNED IN THE UK. MADE IN CHINA.

Reach out to us via our Amazon account bytyping this into your web browser:

support.originalstationery.co.uk

If you love the product and would like to leave a review, head to: Amazon.com/orders

Your feedback is truly appreciated.

126 Thrupp Lane, ThruppStroud, GLOS

United KingdomGL52EH