solar powered sign pylons -...
TRANSCRIPT
Solar Powered Sign PylonsPowered by Gaia Solar
The Pylon is made from a steel frame with a powerful 10
mm hardened glass fronts. The sun cells are integrated
into the glass, which afterwards generates energy for
the integrated LED light source.
The Sun cell pylon has developed for outdoor place-
ment, where a power source is not available. This
makes it possible to place in positions, where you would
otherwise look at a big investment in installing power
cables, electricity subscriptions and so on.
The Sun cell pylon is naturally placed in a position with
the optimal hours of sun available.
A luminated sign pylon with sun cell panels as energy source.
Think about the environment, and save through your energy bill.
A konfigurator has been developed for the sun cell
pylon, giving you information about:
- Sun cell area
- Light Media
- Battery
- Handling of the unit
- Potential sensors.
This way you are guided towards finding your optimal
positioning.
Handling
We start by integrating a twilight switch into the pylon,
so at dusk the pylon will switch on, and thereby illumi-
nating the sign.
It is possible to integrate a movement sensor with a
dimmer switch, making the optimal energy use of your
pylon.
The movement sensor activates the full level of light
once movement is detected, after which the light gets
dimmed to one 10th when no movement is sensed.
This optimizes the lifespan of the energy capacity.
1
3
2
Step 1
The suns beams hit the sun cells, thereby charging
and generating power, even on a cloudy day it will
produce power for the system.
Step 2
The cable wiring makes the electricity run to the sun cell
charger, handling interface , the battery, as well as the
LED-Driver.
Step 3
Double sided LED-Light sources (1200 x 1200 mm
max) glows up the pylon.
DanSign A/S Smedeland 38 DK-2600 Glostrup Phone +45 44 84 03 30 www.dansign.com [email protected]