www.cemegroup.com

1

www.cemegroup.com

Beverage

ww

w.c

emeg

roup

.com

Coffee Beverage RefrigertationAir-conditioning

Steam Medical WeldingWater

Management Other-Industrial

Water beverage solenoid valves and pumps

BeverageBeverage

1

Beverage

CEME introduces its wide range of components dedicated to beverage system.

These products have been designed by CEME with the aim of bringing innovative

solutions and high quality components for Water Refrigerator system as well as

Reverse Osmosis System for drinkable water.

CEME has put in place its decades of experience in developing products in compliance

with the most relevant norms related to potable water and food grade.

Beverage

www.cemegroup.comwww.cemegroup.comwww.cemegroup.com

• SOLENOID VALVE - quick connection for cold and hot water

• DISPENSING VALVE - 2 or 3 Inlet & 1 Outlet

• PERIPHERAL PUMP FOR CARBONATOR• SOLENOID PUMP

CEME, SOLENOID PUMPS AND VALVES

Electro-pumps, solenoid valves,

pressure switches, fl ow meters for a

perfect fl uid control

Established in 1974, CEME is now a landmark

of reference for industrial pumps and valves

production in Italy and throughout the world.

Over the years, the company has diversifi ed

its product range and their applications

enriching its array of electro-pumps, solenoid

valves, pressue switches, fl ow meters and other

components to properly control the passage of

any type of fl uid: water, gas, steam, air.

CEME is renowned for its technical engineering

know-how, quality, fl exibility and for the

distinctive ability to develop innovative solutions

for customers on the Italian and international

markets. Technology needs control.

BeverageBeverage

32

www.cemegroup.com

GENERAL FEATURES

Hydraulic body: Thermoplastic PA66 30%FV

Inlet / Outlet: John Guest 4/6/8mm - 1/4’’

Sealing on the mobile core: VITON rubber for alimentary use

Overall dimensions: according with the drawing of the model

Electrical connections: 6,3 x 0,8 fast-on terminals

Electrical insulation class I: according with EN 60 335-1

Operation: Direct Acting

Working pressure: 0-8 bar

Internal hole: 2,5mm

GENERAL FEATURES

Hydraulic body: Thermoplastic PA66 30%FV

Inlet / Outlet: John Guest 4/6/8mm - 1/4’’

Sealing on the mobile core: VITON rubber for alimentary use

Overall dimensions: according with the drawing of the model

Electrical connections: 6,3 x 0,8 fast-on terminals

Electrical insulation class I: according with EN 60 335-1

Operation: Direct Acting

Working pressure: 0-8 bar

Internal hole: 2,5mm

V791 - 2/2 WAY - NC V730 - NC 2 Inlet - 1 Outlet

6122

60

A

A

(44,

9)

(69,8)

(59,

7)

www.cemegroup.com

BeverageBeverage

www.cemegroup.com

5

www.cemegroup.com

4

BeverageBeverage

GENERAL FEATURES

Hydraulic body: Thermoplastic PA66 30%FV

Inlet / Outlet: John Guest 4/6/8mm - 1/4’’

Sealing on the mobile core: VITON rubber for alimentary use

Overall dimensions: according with the drawing of the model

Electrical connections: 6,3 x 0,8 fast-on terminals

Electrical insulation class I: according with EN 60 335-1

Operation: Direct Acting

Working pressure: 0-8 bar

Internal Hole: 2,5mm

Holes for fi xing

GENERAL FEATURES

Hydraulic body: Thermoplastic PPA

Inlet / Outlet: Quick connection AVS Römer 4/6/mm

Sealing on the mobile core: VITON rubber for alimentary use

Overall dimensions: according with the drawing of the model

Electrical connections: 6,3 x 0,8 fast-on terminals

Electrical insulation class I: according with EN 60 335-1

Operation: Direct Acting

V796 - 2/2 way - NCV731 - NC3 Inlet - 1 Outlet

A

A

(44,

9)

(94,8)

(59,

7)

Orifi ce sizemm

Flowm3/h

MOPD (bar)***AC DC

1.0 0.03 25 231.2 0.04 23 201.5 0.07 17 152.0 0.10 13 92.5 0.12 9 6

47,9

8,5

1116

,5

56,4

10 12

46,6

25

17

25

INLET

Push-in fi ttingAVS Roemer for Ø4 hose

N. 2Ø3.2x10

(fi xing point)

Ø 3,5mmHole

B ( 1 : 1 )

B

22

19

14

www.cemegroup.com

7

www.cemegroup.com

6

BeverageBeverage

MAIN TECHNICAL FEATURES

Materials:

Pump Body: PEI reinforced, FDA-NSF approved

Shaft: Stainless steel AISI430FM

Impeller: PPS/PEEK reinforced, FDA - NSF approved

Mecanichal Seal: Ceramic/graphite/NBR -NSF Approved

Seals: EPDM or NBR FDA approved

NSF approving for the complete pump: in progress

WORKING CONDITIONS:

Ambient T°: -10° / 50°C

Fluid T°: -10° / 80°C

Duty: 100% ED. Suitable for use with water and low corrosive / abrasive fl uid

Max. allowable pressure: 12,5 barg ( 185 psi )

Note: The inlet pressure must be add on the above performance curve with the relative effect on the fl ow rate.

Suction Head: 150 mm. before priming, 2000 mm. after priming. In case of different conditions please contact our TEC dep. for a feasibility request

Executions

Standard: Horizontal installations with a 50cm of electrical cable and a G.3/8 “Male, facing up.Other confi gurations are available, contact our TEC dep. for a feasibility request.A balanced settable by-pass valve is also available.

MTP 700 Peripheral pump

MTP 700 Peripheral pump

Motor:Standard: Single or Three phase induction motor 250W – 230V– 50Hz - 2800rpm – IP00 with capacitor and thermal protection 140°C insulation class F/B, Fan cooled.Other voltages , frequencies and confi gurations are available, contact our TEC dep. for a feasibility request.

121,

5

1022

5

134127

IN By-pass adjustment screw

A-A ( 1 : 2 )

7

36

90

7060 27.5 67.5

==

112

OUT

AA

N°2 G.3/8

NOTE: Hydraulic characteristics obtained with waters at 20° C at pump nominal speed. Working tolerance on Hydraulic and Electrical characteristics is ± 10%

14

12

10

8

6

4

2

00 100

13

190

160

130

100

72

43

14

40 66 92 120 145

200 300 400 500 600 L/h

gph

psi barg

FLOW RATE

CEME PUMP MTP700 PERFORMANCE CURVE

PRES

SUR

E

“50Hz”

“60Hz”

60Hz +3bar inlet

www.cemegroup.com

9

www.cemegroup.com

8

BeverageBeverage

• Electrical insultaion class II

• Diode integreted (except for 24V)

• Approvals: VDE, IMQ, c Ul

• Voltages: 100V / 50-60Hz - 120V / 60Hz - 220V 50Hz - 230V 50Hz - 240V 50Hz - 24V 50-60Hz

EP 5Solenoid pump

EP 5Solenoid pump

Description

Technical data

Body material PA66/POM

Seal material NBR (OTHER MATERIAL AVAIALABLE ON REQUEST

Electrical connection 6,3 x 0,8 fast-on terminal

Insulation class F

122

1850

55

1/8" Gas

Min

7 14O

12CH

54,3

13,5O

6,3 x 0,8 (x2)

74,5

O 7,2

55

13,2O

4,5

4,5

Pressure(bar)

Average Flow Rate (cc/min)

E4 E5 E7 E4R

0 450 650 1050 350

2 315 520 650 230

4 260 420 400 180

6 240 350 180 110

7 230 330 0 80

8 220 300 - 50

10 200 210 - 0

12 160 140 - -

14 130 60 - -

15 100 0 - -

17 40 - - -

19 0 - - -

10

Beverage

CEME SPAUffi ci e StabilimentoVia Garibaldi, 6320061 Carugate (MI)

Ph. +1 440 2263200 Fax +1 440 4244970

CEME ZHONGSHAN CO.LTDIndustrial Road, nr.38 528415 Xiaolan Town, Zhongshan City, Guangdong Province, P.R. China

CEME USA33801 Curtis Blvd, nr.11044095 Eastlake, OHIO

Ph. +86 760 22288986 Fax +86 760 2288987

Tel. +39 02 921568 1Fax +39 02 92150220ceme@cemegroup.comwww.cemegroup.com

ww

w.c

emeg

roup

.com

Water beverage solenoid valves and pumps

Coffee Beverage RefrigertationAir-conditioning

Steam Medical WeldingWater

Management Other-Industrial