solenoids - deltrol controls · 2017. 4. 30. · this product brochure provides general information...
TRANSCRIPT
DeltrolCONTROLS www.deltrol-controls.com
ISO 9001:2008 Certified
Solenoids
This product brochure provides general information on our standard product line of solenoids. Complete product information can be obtained by visiting our website www.deltrol-controls.com.
At Deltrol Controls we take pride in our ability to customize a standard product or design an entirely new product specific to your application. Please contact Deltrol Controls directly to discuss your application with a Sales Engineer.
Most of our continuous duty solenoids have UL approval, and are listed in the UL File NO. E57982. Refer to our online catalog at www.deltrol-controls.com for specific information on UL approvals.
Our solenoids are being successfully used in a multitude of applications. Some of the more common applications are as follows: Appliances – Generators – Printing Equipment – HVAC– Security – Beverage Dispensing Equipment – Commercial Laundry Equipment – Medical Equipment – Small Engines – Electric Door Locks – Motorcycle Aftermarket – Valves – Gaming Equipment – Office Equipment – Vending Equipment
This information on the following pages refers to 4 types of solenoids: C-Frames, D-Frames Tubular and Magnetic Latching. The following illustrates each of these types of solenoids. (Note: Models shown are pull-type versions, and may also be available in push-type versions.)
Our Standard Solenoid Product Line
Custom Solenoid Models
UL Approval
Typical Applications
Solenoid Models
DeltrolCONTROLS www.deltrol-controls.com
LengthLength
LengthWidth
Width
Height
Height
Diameter
C–Frame D–Frame Tubular
Model Size (in)LxWxH
Coil Treatment
MaximumStroke (in)
Voltage Type (2)
Duty Cycle (3) Typical Force (oz) 100% Voltage,77° F at the following strokes (in).
0.000 0.125 0.250 0.500
C-4 0.768 x 0.687 x 0.765 TW 0.300 DCDCDCACACAC
Cont, 3.5 WInt, 8 WPulse, 35 WCont, 4.5 VAInt, 12 VAPulse, 45 VA
18.027.046.023.045.090.0
2.25.015.02.45.015.0
0.82.06.00.81.75.0
C-5 0.969 x 0.734 x 0.812 TW 0.400 DCDCDCACACAC
Cont, 3.7 W Int, 11 WPulse, 42 WCont, 4.7 VAInt, 14 VAPulse, 47 VA
25.038.062.024.050.086.0
3.012.034.03.59.525.0
1.55.019.02.05.515.0
C-6 1.126 x 0.860 x 0.839 ENC 0.500 DCDCDCACACAC
Cont, 4.7 W Int, 12 WPulse, 45 WCont, 6.8 VAInt, 19.6 VAPulse, 68 VA
38.050.068.033.057.095.0
4.011.034.05.913.032.0
1.95.017.04.09.024.0
0.52.06.02.04.510.0
C-7 1.140 x 1.062 x 1.025 ENC 0.500 DCDCDCACACAC
Cont, 5 W Int, 11.5 WPulse, 50 WCont, 7.8 VAInt, 21 VAPulse, 78 VA
42.060.093.042.066.0110.0
6.516.060.09.020.052.0
3.08.040.07.016.042.0
1.02.515.04.08.021.0
C-8 1.187 x 1.280 x 1.261 ENC 0.500 DCDCDCACACAC
Cont, 6.5 W Int, 16 WPulse, 65 WCont, 9.5 VAInt, 25 VAPulse, 95 VA
65.079.0103.050.090.0134.0
12.027.074.012.025.053.0
5.514.053.08.020.042.0
2.55.024.06.015.030.0
C-9 1.062 x 1.375 x 1.413 ENC 0.500 DCDCDCACACAC
Cont, 8.6 W Int, 15.5 WPulse, 86 WCont, 13.7 VAInt, 52 VAPulse, 137 VA
75.084.0156.059.0137.0181.0
18.030.0105.017.045.085.0
10.017.076.014.036.075.0
3.06.030.010.027.057.0
C-15 1.734 x 0.844 x 0.942 ENC 0.800 DCDCDCACACAC
Cont, 7.4 W Int, 19 WPulse, 74 WCont, 12 VAInt, 26 VAPulse, 120 VA
53.059.070.041.075.0102.0
16.032.033.011.017.044.0
7.517.023.08.014.035.0
3.07.013.07.012.530.0
C-Frame
(1) Coil Treatment: TW = Tape Wrapped with Lead Wires, ENC = Polyester Encapsulated with Spade Terminals Specifications subject to change without notice.(2) Typical DC voltages are 6, 12, 24, 110. Typical AC voltages are 6, 12, 24, 120, 240. Other voltages may be available upon request.(3) Duty Cycle: Cont = Continuous Duty (100%), Int = Intermittent Duty, Pulse Duty (10%, 100 ms on)
Custom Solenoids• In addition to our standard lines, Deltrol Controls can design and manufacture custom solenoids to your specifcations
For more information, visit our website at www.deltrol–controls.com or contact us directly at 414-671-6800
D-FrameModel Size (in)
LxWxHCoil Treatment
MaximumStroke (in)
Voltage Type (2)
Duty Cycle (3) Typical Force (oz) 100% Voltage,77° F at the following strokes (in).
0.000 0.125 0.500 0.750
D-2 1.558 x 1.437 x 1.625 ENC 1.000 DCDCDCACACAC
Cont, 11W Int, 29 WPulse, 115 WCont, 13 VAInt, 59 VAPulse, 135 VA
107.0127.0158.064.0131.0180.0
24.055.0140.015.044.080.0
9.020.070.013.040.072.0
4.09.030.06.021.041.0
D-3HD 1.737 x 1.437 x 1.625 ENC 1.000 DCDCDCACACAC
Cont, 11 WInt, 27 WPulse, 110 WCont, 21 VAInt, 120 VAPulse, 210 VA
153.0165.0207.087.0205.0254.0
30.070.0180.020.065.0100.0
10.026.090.018.058.090.0
4.010.040.010.034.063.0
D-4 1.996 x 1.437 x1.625 ENC 1.000 DCDCDCACACAC
Cont, 11.5 WInt, 47 WPulse, 105 WCont, 10 VAInt, 59 VAPulse, 100 VA
112.0134.0155.050.0123.0155.0
32.090.0122.09.033.052.0
12.050.080.010.036.059.0
8.030.055.011.041.065.0
D-4HD 2.175 x 1.437 x 1.625 ENC 1.000 DCDCDCACACAC
Cont, 11.5 WInt, 38 WPulse, 115 WCont, 31 VAInt, 145 VAPulse, 310 VA
141.0163.0201.092.0192.0254.0
41.095.0175.020.058.0105.0
15.048.0105.023.065.0108.0
9.025.062.027.075.0125.0
D-11 1.851 x 0.938 x 1.190 ENC 0.800
1.000
DCDCDCACACAC
Cont, 8 WInt, 19 WPulse, 80 WCont, 12.5 VAInt, 39 VAPulse, 125 VA
61.065.077.054.092.0116.0
8.022.053.011.023.040.0
4.010.034.010.023.038.0
2.05.021.08.020.034.0
D-17 1.624 x 0.875 x 1.062 ENC 0.800 DCDCDCACACAC
Cont, 6 WInt, 14.5 WPulse, 60 WCont, 9.4 VAInt, 23 VAPulse, 93 VA
53.063.076.058.081.0113.0
5.012.038.09.016.036.0
1.84.519.07.012.027.0
0.82.07.03.07.014.0
D-22 1.130 x 0.750 x 0.750 ENC 0.400
0.500
DCDCDCACACAC
Cont, 4.2 WInt, 9.6 WPulse, 40 WCont, 6.5 VAInt, 8.5 VAPulse, 60 VA
30.038.049.031.053.073.0
1.84.015.02.43.314.0
1.01.57.0
D-28 1.125 x 0.938 x 1.188 ENC 0.750 DCDCDCACACAC
Cont, 5.5 WInt, 11.5 WPulse, 55 WCont, 8 VAInt, 21 VAPulse, 80 VA
61.065.077.054.092.0116.0
8.022.054.011.023.040.0
4.010.034.011.023.038.0
2.56.021.08.020.035.0
D-30 2.015 x 1.000 x 1.218 ENC 1.000 DCDCDCACACAC
Cont, 8.5 WInt, 21 WPulse, 85 WCont, 13 VAInt, 37 VAPulse, 120 VA
110.0133.0185.065.0108.0176.0
15.040.097.013.021.040.0
6.016.055.011.017.033.0
23.0
D-50 1.625 x 1.562 x 1.828 TW 0.850
1.000
DCDCDCACACAC
Cont, 10 WInt, 25 WPulse, 100 WCont, 14 VAInt, 53 VAPulse, 140 VA
158.0183.0226.084.0151.0227.0
25.065.0180.021.046.094.0
8.021.082.019.040.090.0
4.09.035.010.024.054.0
D-70 2.625 x1.562 x 1.828 TW 1.000 DCDCDC
Cont, 13 WInt, 48 WPulse, 130 W
150.0211.0247.0
62.0112.0165.0
30.082.0135.0
15.050.0100.0
D-90 3.540 x 1.750 x 1.940 TW 1.500 DCDCDC
Cont, 23 WInt, 58 WPulse, 230 W
150.0202.0303.0
108.0158.0275.0
80.0133.0235.0
50.0100.0205.0
PS-75 2.625 x 1.562 x 1.828 TW 0.900 DC Cont, 12/150 W 200.0 205.0 125.0 80.0
(1) Coil Treatment: TW = Tape Wrapped with Lead Wires, ENC = Polyester Encapsulated with Spade Terminals Specifications subject to change without notice.(2) Typical DC voltages are 6, 12, 24, 110. Typical AC voltages are 6, 12, 24, 120, 240. Other voltages may be available upon request.(3) Duty Cycle: Cont = Continuous Duty (100%), Int = Intermittent Duty (25%, 3 min on), Pulse Duty (10%, 100 ms on)
Tubular Model Size (in)
Dia x LCoil Treatment
MaximumStroke (in)
Voltage Type (2)
Duty Cycle (3)
Typical Force (oz) 100% Voltage,77° F at the following strokes (in).
0.000 0.250 0.500 0.750
MED 12 x 1.5 Ø0.750 x 1.500 TW 0.600 DCDCDC
Cont, 6 WInt, 15 WPulse, 58 W
38.050.064.0
3.010.026.0
1.54.016.0
MED 16 x 1.125 Ø1.000 x 1.125 TW 0.400 DCDCDC
Cont, 8 WInt, 19 WPulse, 77 W
94.0126.0180.0
4.010.050.0
MED 16 x 2 Ø1.000 x 2.000 TW 0.800 DCDCDC
Cont, 10 WInt, 24 WPulse, 96 W
129.0149.0201.0
18.036.0115.0
8.015.077.0
5.08.060.0
MED 19 x 2.7 Ø1.187 x 2.700 TW 1.400 DCDCDC
Cont, 12 WInt, 30 WPulse 116 W
116.0133.0165.0
25.035.075.0
16.025.056.0
14.022.052.0
MED 24 x 1.7 Ø1.500 x 1.700 TW 0.800 DCDCDC
Cont, 12 WInt, 33 WPulse, 120 W
173.0251.0358.0
26.060.0185.0
8.020.075.0
7.022.0
MED 24 x 2.4 Ø1.500 x 2.400 TW 1.000 DCDCDC
Cont, 14 WInt, 40 WPulse, 140 W
200.0265.0328.0
52.0120.0210.0
25.063.0140.0
17.035.085.0
Model Size (in)LxWxH
Coil Treatment
MaximumStroke (in)
Voltage Type (2)
Duty Cycle (3) Typical Force (oz) 100% Voltage,77° F at the following strokes (in).
0.000* 0.125 0.250 0.500
D4-ML 1.996 x 1.437 x 1.625 ENC 1.000 DCDC
Intermittent 29 WPulse 115 W
121.0121.0
90.0148.0
73.0133.0
37.087.0
D26-ML 1.420 x 0.790 x 1.020 TW 0.500 DCDC
Intermittent 12 WPulse 48 W
109.0109.0
47.171.2
31.046.8
14.319.4
D30-ML 2.015 x 1.000 x 1.218 ENC 1.000 DCDC
Intermittent 21 WPulse 85 W
96.096.0
65.0172.0
46.0152.0
19.799.0
Magnetic Latching(1) Coil Treatment: TW = Tape Wrapped with Lead Wires, ENC = Polyester Encapsulated with Spade Terminals Specifications subject to change without notice.(2) Typical DC voltages are 6, 12, 24, 110, 115. Other voltages may be available upon request.(3) Duty Cycle: Cont = Continuous Duty (100%), Int = Intermittent Duty(25%, 1 min on), Pulse Duty (10%, 100 ms on)
(1) Coil Treatment: TW = Tape Wrapped with Lead Wires, ENC = Polyester Encapsulated with Spade Terminals Specifications subject to change without notice.(2) Typical DC voltages are 6, 12, 24. Other voltages may be available upon request.(3) Duty Cycle: Int = Intermittent Duty, Pulse Duty (10%, 100 ms on)
*Latching Force
DeltrolCONTROLS www.deltrol-controls.com
2740 S. 20th St. Milwaukee, WI 53215 USA | P: 414.671.6800 | F: 414.671.6809 | [email protected]
SolenoidsRelays
CustomAssembliesHose Sets
ProductManufacturing
Custom Product Engineering/Manufacturing
Value AddedAssembly
On-Site ProductTesting
InletValves
DispensingValves
Bulletin 3005-1
Deltrol Controls Products
Deltrol Controls designs and manufactures dispensing valves, inlet valves, solenoids, relays, hose sets and fittings, proportional valves and custom assemblies. We offer an extensive line of standard products and have an in–house engineering staff that will work with you to design a custom product specific to your application.
Please visit www.deltrol–controls.com for further information.
Deltrol Controls Overview
Deltrol Controls is located in Milwaukee, Wisconsin USA and is a wholly-owned subsidiary of Deltrol Corp. For over 45 years, we have designed and manufactured valves, solenoids, relays, and custom assemblies for a variety of applications. Our Milwaukee operation employs approximately 110 employees, working out of a 110,000 sq. ft. ISO 9001:2008 Registered manufacturing facility. We also have manufacturing capabilities in other parts of the world that allow us to be a globally competitive supplier.