SOLID STATE SATURABLE REACTOR DESIGN

AC VOLTAGE STABILISERS & REGULATORS

AC THREE PHASE - 6 TO 200 kVA

ENSURING AN EXTREMELY STABLE AC MAINS SUPPLY VOLTAGE

AC mains supply voltage fluctuations can cause equipment to behave erratically and

malfunction. Some systems may even break down due to these fluctuations, noise or

spikes. Failure to ensure the incoming mains voltage is stable and spike free can often

result in costly equipment repairs and unscheduled down-time.

SOLID STATE VOLTAGE STABILISATION

with exceptionally ultra fast speed of

response and outstanding output voltage

accuracy – ideal for highly sensitive /

mission critical loads and applications.

PEN-H-3P-MARCH-2013 www.AshleyEdison.com

FEATURES

Automatic Voltage Regulation

Step less automated voltage regulation

Wide Range of Power Ratings

Three Phase 6 to 200 kVA

Choice of Input Voltage Swing Ranges

Input Swing - ±15% (S15), -20% / +10% (S2010) to

specify.

Highly Precise Output Voltage Regulation

Output Voltage Accuracy ± 0.5%

Transient Voltage Surge Suppression

TVSS - Protects loads against harmful high-energy

surges, transients and spikes.

Solid State Design

Highly reliable and endurable static design with no

moving parts, delivering a virtually ‘Maintenance Free’

voltage regulation solution.

Independent Phase Balancing & Control

Independent phase voltage sensing and control to

ensure the individual phase voltages remain stable -

regardless of load unbalance .

Inbuilt High Overload Capability

Ideal for loads with an inherent initial high current

draw on start up.

Over / Low Voltage Protection

Ability to automatically shutdown the Voltage

Stabiliser in the event of the input supply voltage

going outside the input voltage window.

Phase Failure Protection

Protection of the load in the event of phase failure.

Input Circuit Breaker

Standard protection on all models

Comprehensive Metering

Analogue Output Voltmeter and Ammeter - as

Standard.

Optional Accessories Output Circuit Breaker, Full Manual Maintenance

Bypass Switch, Lightning Surge Arrestors, Digital

Power Metering and AquaStop Protective Coating.

Compliance with International Standards

Designed, manufactured and supplied to comply with

leading international standards.

CE Conformity

Fully compliant and labelled.

Warranty

3 Years / 36 Months as standard.

Ashley-Edison PEN Series AC Voltage Stabilisers offer -

Voltage Stability & Protection

Suitable for most types of electrical and electronic equipment, Ashley-Edison’s PEN AC Voltage

Stabilisers continuously monitor the incoming supply. Should the incoming voltage rise or drop, the

Stabilizers will automatically control the output to ensure the voltage reaching the load equipment

always remains constant at the requisite voltage. Inbuilt spike protection ensures the load is

continuously protected against harmful mains born high energy spikes and surges.

Ultra Fast Speed of Response and Extremely Accurate Output Voltage

Compact in size and quiet in operation, PEN Series AC Voltage Stabilisers deliver an unsurpassable

speed of response and impressive ±0.5% output voltage accuracy.

Solid State Design

Based on the highly reliable and endurable Saturable Reactor design principle, PEN Series AC

Voltage Stabilisers are solid state in nature. With no moving parts, they are virtually ‘Maintenance

Free’ solutions.

The Logical Choice for the Most Demanding of Applications

Being a somewhat more pricey voltage stabilisation solution when compared to our popular range of

SES Servo-Electronic based Stabilisers, PEN AC Voltage Stabilisers are primarily intended for

‘Mission Critical’ applications where the load equipment is ultra-sensitive to the vagaries of the

incoming mains supply and demands a highly stable supply voltage - eg. Laboratory and testing

equipment and ‘High-Tech’ manufacturing processes.

PEN H - THREE PHASE

380V - 400V - 415V - 50 or 60Hz

PEN H SERIES - THREE PHASE - 6 to 200 kVA

GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS

PEN H SERIES - THREE PHASE - 6 to 200 kVA

SATURABLE REACTOR DESIGN TOPOLOGY

GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS

H SERIES - Input Voltage Windows

Nominal Single Phase

Voltage

Model Swing No.

Input Voltage Window

± % of Nominal L-N Voltage L-L Voltage

380V

S15 ±15% 187v to 253v 323v to 437v

S2010 -20% / +10% 176v to 242v 304v to 418v

400V S15 ±15% 196v to 265v 340v to 460v

S2010 -20% / +10% 184v to 253v 320v to 440v

415V S15 ±15% 204v to 276v 353v to 477v

S2010 -20% / +10% 192v to 264v 332v to 457v

VOLTAGE CHOICES AVAILABLE

4 WIRE SOLUTIONS THREE PHASE WITH NEUTRAL (+ GROUND)

H SERIES 6 to 200 kVA

High Voltage Models:

380V, 400V or 415V

Other voltages available on individual request / quotation.

LY SERIES 6 to 120 kVA

Low Voltage Models:

190V, 200V, 208V or 220V.

Other voltages available on individual request / quotation.

Please Note – PEN AC Voltage Stabilisers are not designed to support / protect voltage “back feed” applications, where energy is required to be also fed back into the utility supply.

INPUT VOLTAGE WINDOW

TYPICAL APPLICATIONS

Security Systems

Production Line

CNC Equipment

SMT Equipment

POS Terminals

Process Control Systems

TV / Radio Broadcasting Stations

Elevators

Audio/Video Systems

Computers & Network Systems

Medical Equipment

Electronics Equipment

Testing Equipment

Laboratory Equipment

PEN-H-3P-MARCH-2013 www.AshleyEdison.com

Also available as 3 Wire Solutions (No Neutral)

- PEN-HD-3P & PEN-LD-3P SERIES

An ‘AIDING’ and ‘OPPOSING’ Magnetic Amplifier is connected across the

main transformer to either increase or reduce the input voltage should it go

high or low. This is achieved by increasing or reducing the magnetic

inductance in the two cores. The Control Amplifier Sensor will detect the

input fluctuations and then inject a DC current into the two respective

Amplifiers to either increase or reduce its inductance.

Reducing the inductance will increase or reduce the output voltage and

vice versa. The Sensing Amplifier monitors the output voltage continuously

and automatically adjusts the DC currents through the control coils,

thereby ensuring that the output voltage is kept constant.

With this style design topology there are no moving parts and maintenance

requirements are minimal.

The Filter, in conjunction with the inductance of the magnetic core, forms

an extremely effective means of suppressing high energy spikes and other

mains borne noise.

TECHNICAL SPECIFICATION

Models Rating

kVA

Max Rating (Amps) Dimensions Weights

@ 380V @ 400V @ 415V W x H x D (mm) Kg

PEN-6H-3P-S15 6 9.1 8.7 8.3 500 x 1170 x 600 240

PEN-10H-3P-S15 10 15.2 14.4 13.9 500 x 1170 x 600 245

PEN-15H-3P-S15 15 22 21 20 560 x 1380 x 660 325

PEN-20H-3P-S15 20 30 28 27 560 x 1380 x 660 380

PEN-30H-3P-S15 30 45 43 41 600 x 1300 x 600 455

PEN-40H-3P-S15 40 60 57 55 680 x 1520 x 800 590

PEN-45H-3P-S15 45 68 64 62 680 x 1520 x 800 615

PEN-50H-3P-S15 50 75 72 69 680 x 1520 x 800 675

PEN-60H-3P-S15 60 91 86 83 680 x 1520 x 800 685

PEN-75H-3P-S15 75 113 108 104 680 x 1520 x 800 755

PEN-100H-3P-S15 100 151 144 139 680 x 1520 x 800 850

PEN-120H-3P-S15 120 182 173 166 1088 x 2000 x 990 1400

PEN-150H-3P-S15 150 227 216 208 1088 x 2000 x 990 1460

PEN-180H-3P-S15 180 273 259 250 1088 x 2000 x 990 1700

PEN-200H-3P-S15 200 303 288 278 1088 x 2000 x 990 1720

S15 PRODUCT SELECTION TABLE

Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.

Technology: Saturable Reactor - Solid State Twin Satuarble Reactor with Magnetic Amplifier.

Input Voltage Swing: ±15% Three Phase, 4 Wire (with Neutral +

Ground / Earth).

Output Voltage: Presettable for any voltage between 380/220V, 400/230V & 415/240V (Customer to specify), Three Phase, 4 Wire.

The permissible input voltage swing is relative to the preset output voltage.

Output Voltage Accuracy: ± 0.5%

Frequency: 50 Hz ± 3% (60 Hz To Specify)

Response Time: <1.5ms

Correction Time: 3 ~ 5 Cycles.

Efficiency: 95%

Power Factor: Any lagging to 0.9 leading

Surge Ratings: 10 x max. current rating for 2 seconds 5 x max. current rating for 1 minute 2 x max. current rating for 2 minutes

Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.

Total Harmonic Distortion: Less than 3%

Independent Phase Control:

Maintains each phase voltage stable irrespective of load unbalance, even up to 100% load unbalance.

Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.

Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)

EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.

CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).

Standard Warranty: Three Years / 36 Months from date of supply

Standard Features: Input Circuit Breaker Over / Under Voltage Protection Loss of Phase & Phase Reversal Trip Protection Input / Output Terminals Voltmeter & Ammeter

Optional Accessories: Output Circuit Breaker Manual Maintenance Bypass Switch Lightning Surge Arrestor

Digital Power Metering - showing V,A,W,VA,AER,PF & kWH

AquaStop Protective Coating - protection against damp and moisture ingress

Optional Step Down Voltage Feature:

Ideal for applications where the utility supply voltage is different from the load equipment’s requirement - see PEN-HL-3P SERIES Step Down AC Voltage Stabilisers.

Optional Isolation Transformer:

Shielded isolation transformer providing extra protection between the utility and the load. Protects against common and transverse mode electrical noise - see PCEN-H-3P SERIES AC Power Line Conditioners.

PEN-H-3P-S15-MARCH-2013 www.AshleyEdison.com

Note: Optional Accessories added may affect dimensions - subject to confirmation.

ALSO available in

Outdoor IP54 (NEMA 3 Style) Enclosures - OPEN-H-3P-S15 SERIES

PEN H-3P-S15 SERIES - THREE PHASE - 6 to 200 kVA

GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS

TECHNICAL SPECIFICATION

Models Rating

kVA

Max Rating (Amps) Dimensions Weights

@ 380V @ 400V @ 415V W x H x D (mm) Kg

PEN-6H-3P-S2010 6 9.1 8.7 8.3 500 x 1170 x 600 240

PEN-10H-3P-S2010 10 15.2 14.4 13.9 500 x 1170 x 600 245

PEN-15H-3P-S2010 15 22 21 20 560 x 1380 x 660 325

PEN-20H-3P-S2010 20 30 28 27 560 x 1380 x 660 380

PEN-30H-3P-S2010 30 45 43 41 600 x 1300 x 600 455

PEN-40H-3P-S2010 40 60 57 55 680 x 1520 x 800 590

PEN-45H-3P-S2010 45 68 64 62 680 x 1520 x 800 615

PEN-50H-3P-S2010 50 75 72 69 680 x 1520 x 800 675

PEN-60H-3P-S2010 60 91 86 83 680 x 1520 x 800 685

PEN-75H-3P-S2010 75 113 108 104 680 x 1520 x 800 755

PEN-100H-3P-S2010 100 151 144 139 680 x 1520 x 800 850

PEN-120H-3P-S2010 120 182 173 166 1088 x 2000 x 990 1400

PEN-150H-3P-S2010 150 227 216 208 1088 x 2000 x 990 1460

PEN-180H-3P-S2010 180 273 259 250 1088 x 2000 x 990 1700

PEN-200H-3P-S2010 200 303 288 278 1088 x 2000 x 990 1720

S2010 PRODUCT SELECTION TABLE

Copyright 2013 © Ashley-Edison (UK) reserve the right to change any or all the specifications indicated or implied without prior notice. E&EO.

Technology: Saturable Reactor - Solid State Twin Satuarble Reactor with Magnetic Amplifier.

Input Voltage Swing: -20%/+10% Three Phase, 4 Wire (with Neutral

+ Ground / Earth).

Output Voltage: Presettable for any voltage between 380/220V, 400/230V & 415/240V (Customer to specify), Three Phase, 4 Wire.

The permissible input voltage swing is relative to the preset output voltage.

Output Voltage Accuracy: ± 0.5%

Frequency: 50 Hz ± 3% (60 Hz To Specify)

Response Time: <1.5ms

Correction Time: 3 ~ 5 Cycles.

Efficiency: 95%

Power Factor: Any lagging to 0.9 leading

Surge Ratings: 10 x max. current rating for 2 seconds 5 x max. current rating for 1 minute 2 x max. current rating for 2 minutes

Surge Suppression: TVSS - Protects loads against high-energy Spikes and Transient Voltages.

Total Harmonic Distortion: Less than 3%

Independent Phase Control:

Maintains each phase voltage stable irrespective of load unbalance, even up to 100% load unbalance.

Environment: Temperature range –15 to 45 °C. Derate by 2% for each additional °C Up to max 60 °C . Suitable for indoor tropical use 95% RH (non-condensing). Maximum altitude 1000m. Derate by 2.5% for each additional 500m.

Construction: Enclosures to IP20 (NEMA 1 Style) - BS EN 60529.

Paint Colour: RAL 7032 (Grey - Epoxy Powder Coating)

EMC Conformance: Complies with BS EN 55022 and the relevant parts of the BS EN 61000 series of standards.

CE Conformity: CE Marked - being fully compliant with European Union Directives 2004/108/EC (The EMC Directive) and 2006/95/EC (The Low Volt-age Directive).

Standard Warranty: Three Years / 36 Months from date of supply

Standard Features: Input Circuit Breaker Over / Under Voltage Protection Loss of Phase & Phase Reversal Trip Protection Input / Output Terminals Voltmeter & Ammeter

Optional Accessories: Output Circuit Breaker Manual Maintenance Bypass Switch Lightning Surge Arrestor

Digital Power Metering - showing V,A,W,VA,AER,PF & kWH

AquaStop Protective Coating - protection against damp and moisture ingress

Optional Step Down Voltage Feature:

Ideal for applications where the utility supply voltage is different from the load equipment’s requirement - see PEN-HL-3P SERIES Step Down AC Voltage Stabilisers.

Optional Isolation Transformer:

Shielded isolation transformer providing extra protection between the utility and the load. Protects against common and transverse mode electrical noise - see PCEN-H-3P SERIES AC Power Line Conditioners.

PEN-H-3P-S2010-MARCH-2013 www.AshleyEdison.com

Note: Optional Accessories added may affect dimensions - subject to confirmation.

ALSO available in

Outdoor IP54 (NEMA 3 Style) Enclosures - OPEN-H-3P-S2010 SERIES

PEN H-3P-S2010 SERIES - THREE PHASE - 6 to 200 kVA

GENERAL COMMERCIAL & INDUSTRIAL PRODUCTS