12/14/2009 MR-14A-061

Some remarks on micro-physics of LPO (plastic anisotropy)

some tutorials

Shun-ichiro KaratoYale University

Department of Geology & Geophysics

12/14/2009 MR-14A-062

Visser et al. (2008) Trampert and van Heijst (2002) Panning and Romanowicz (2006)

upper mantle

transition zone

D” layer

Why LPO?

12/14/2009 MR-14A-063

• Seismic anisotropy is controlled mostly by LPO.• But the relationships between LPO and flow geometry are

poorly known for most part of Earth’s interior.

• LPO is determined by the dominant slip systems (LPO) that are controlled by a combination of many microscopic processes (physics of LPO is complex!).

experimental approach: (i) systematic, well-defined lab experiments + (ii) scaling analysis

theoretical approach: (i) key parameters (diffusion, dislocation properties) + (ii) integration of multi-scale physics of deformation

12/14/2009 MR-14A-064

olivine wadsleyite

[100] [010] [001]

~1800 K

~1700 K

~1500 K

(preliminary results)

12/14/2009 MR-14A-065

LPO-flow geometry relationship depends on (i) materials, and (ii) physical/chemical conditions (fabric transitions).

12/14/2009 MR-14A-066

Origin of plastic anisotropy (dislocation creep)How do fabric transitions occur? What controls LPO?

12/14/2009 MR-14A-067

12/14/2009 MR-14A-068

Houlier et al. (1981) from Costa and Chakraborty (2008)

“dry”

Si diffusion in olivine is nearly isotropic.--> diffusion controlled model does not explain large

plastic anisotropy

12/14/2009 MR-14A-069

Fabric transitions for olivine

A

B

C

D

E

12/14/2009 MR-14A-0610

Observations for olivine

• Dominant slip direction is b=[100] (or [001])• consistent with the role of kink/jog

• Stress-induced fabric transitions• inconsistent with the simple diffusion-controlled model

• Larger water weakening effect for b=[001]• cannot be explained by the simple diffusion-controlled model• larger weakening effects for dislocations with larger Peierls stress

(or longer Burgers vector)

anisotropy is largely due to dislocation-related properties

(not by diffusion)

12/14/2009 MR-14A-0611

A model of fabric transitions

• Stress/temperature-induced fabric transition (low T, high stress) [kink energy (Peierls stress)]

• Water/temperature-induced fabric transition (high T, low stress, high water fugacity) [diffusion (point defects), jog energy]

12/14/2009 MR-14A-0612

12/14/2009 MR-14A-0613

Testing the jog (+ diffusion) - controlled modelsome speculations on post-perovskite phase

Eshelby-Foreman theory for dislocation energy with anisotropic elasticity

Jog-controlled climb model is consistentwith olivine data. [100](010) or [100](001)

for post-perovskite?

diffusion creep? • large dislocation energy• fast diffusion (Karki-Khanduja (2007))

12/14/2009 MR-14A-0614

Conclusions

Plastic anisotropy is caused mostly by anisotropic dislocation properties (not much by diffusion anisotropy). Plastic anisotropy depends on T, stress, water content etc. lab studies: well-defined experiments (high-T, low stress) + scaling analysis [Direct applications of lab results without scaling analyses can lead to misleading conclusions.]

modeling: test with well-known materials (e.g., olivine) and then apply to not-yet-studied minerals [jog-controlled model (high-T plasticity model) works OK for olivine, and suggests [100](010) or [100](001) (or [001](100))is the easiest slip system in post-perovskite. But deformation in ppv might occur by diffusion creep.]

12/14/2009 MR-14A-0615

Plastic anisotropy of post-perovskite ?

12/14/2009 MR-14A-0616

Micro-physics of LPO(reminder of ABC of LPO)

• LPO depends on macroscopic deformation geometry and microscopic deformation mechanisms.

• Deformation by dislocation creep produces LPO.• LPO formed by dislocation creep depends activity of slip

systems.• LPO is largely controlled by easiest (+ some other) slip

system(s).• The relative easiness of slip systems is controlled by the

relative rate of deformation that is controlled by (i) anisotropy of dislocation energy (kink, jog formation energy), (ii) by anisotropy of diffusion.– These factors will change with T, P, stress, water content etc.– Results at conditions different from Earth’s interior (e.g., low T)

cannot be applied to Earth’s interior.

12/14/2009 MR-14A-0617

How should we investigate LPO relevant to Earth’s interior?

(micro-physics of LPO is complex)

• Experimental approach: time scales are vastly different between lab and Earth (need extrapolation)

• what kind of experiments should we conduct ?• How should we extrapolate these results ?

• Theoretical (modeling) approach: creep processes are complex

• How should we infer the dominant slip system(s)?• Diffusion coefficients ?• Dislocation properties ?• How should we integrate ?

12/14/2009 MR-14A-0618

Strong LPO develops by deformation only through certain mechanisms

12/14/2009 MR-14A-0619

• Classic diffusion-controlled high-T creep model: can it explain fabric transitions?

• Peierls stress: How does it explain plastic anisotropy at high-T?