sony hdr cx11e 12 e servicemanuallevel2 v1.1 2008.11

SERVICE MANUAL

Sony EMCS Co.

LEVEL 2

Link

SERVICE NOTE

MODEL INFORMATION TABLE

SPECIFICATIONS

FRAME SCHEMATIC DIAGRAM

BLOCK DIAGRAMS

DISASSEMBLY

PRINTED WIRING BOARDS

REPAIR PARTS LIST

SCHEMATIC DIAGRAMS

Link

Revision HistoryRevision History

HDR-CX11E/CX12/CX12E_L2

Ver. 1.1 2008.11

DIGITAL HD VIDEO CAMERA RECORDER

The components identified bymark 0 or dotted line withmark 0 are critical for safety.Replace only with part num-ber specified.

Les composants identifis par unemarque 0 sont critiques pour lascurit.Ne les remplacer que par une piceportant le numro spcifi.

2008K0800-1 2008.11

Published by Kohda TEC9-852-601-32

Precaution on Replacing the VC-535 Board Precaution on Replacing the Holder (MS)

RMT-835

Photo: HDR-CX12

US ModelCanadian Model

AEP ModelUK Model

North European ModelE Model

Australian ModelHong Kong Model

Chinese ModelKorea Model

Tourist ModelJapanese Model

HDR-CX11E/CX12/CX12E

2

ENGLISH JAPANESEENGLISH JAPANESE


SPECIFICATIONS

These specifications are extracted from instruction manual ofHDR-CX11E/CX12E.

SystemVideo compression format: AVCHD (HD)/

MPEG2 (SD)/JPEG (Still images)Audio compression format: Dolby Digital 2/5.1ch

Dolby Digital 5.1 CreatorVideo signal: PAL color, CCIR standards

1080/50i specification Recording format: Movie (HD): AVCHD

1080/50iMovie (SD): MPEG2-PSStill image: Exif Ver.2.2*

Image device: 5.8 mm (1/3.13 type) CMOS sensorRecording pixels (still image, 4:3):Max. 10.2 mega (3 680 2 760) pixels**Gross: Approx. 5 660 000 pixelsEffective (Movie, 16:9):Approx. 3 810 000 pixelsEffective (still image, 16:9): Approx. 3 810 000 pixelsEffective (still image, 4:3): Approx. 5 080 000 pixels

Lens: Carl Zeiss Vario-Sonnar T12 (Optical), 24 , 150 (Digital)

Focal length: F=1.8 - 3.1Filter diameter: 37 mm (1 1/2 in.)f=4.9 - 58.8 mm (7/32- 2 3/8 in.)When converted to a 35 mm still cameraFor movies: 40 - 480 mm (1 5/8 - 19 in.) (16:9)For still images: 37 - 444 mm (1 1/2 - 17 1/2 in.) (4:3)

Color temperature: [AUTO], [ONE PUSH], [INDOOR] (3 200 K), [OUTDOOR] (5 800 K)

Minimum illumination: 5 lx (lux) ([AUTO SLW SHUTTR] [ON], Shutter speed 1/25 second)0 lx (lux) (during NightShot function)

* Exif is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association). Files in this format can have additional information such as your camcorder's setting information at the time of recording.

** The unique pixel array of Sony's ClearVid CMOS Sensor and image processing system (BIONZ) allows still image resolution equivalent to the sizes described.

Input/Output connectorsA/V Remote Connector: Component/video and

audio output jackHDMI OUT jack: HDMI mini connector

LCD screenImage: 6.7 cm (2.7 type, aspect ratio 16:9)Total dot number: 211 200 (960 220)

GeneralPower requirements: DC 6.8 V/7.2 V (battery

pack)DC 8.4 V (AC Adaptor)

Average power consumption: During camera recording using the LCD with normal brightness:HD: 3.8 W SD: 3.3 W

Operating temperature: 0C to 40C (32 F to 104 F)

Storage temperature: -20C to + 60C (-4 F to + 140 F)

Dimensions (approx.): 69 67 129 mm (2 3/4 2 3/4 5 1/8 in.) (whd) including the projecting parts69 67 131 mm (2 3/4 2 3/4 5 1/4 in.) (whd) including the projecting parts, and the supplied battery pack attached

Mass (approx.): 370 g (13 oz)main unit only450 g (1 lb) including the supplied rechargeable battery pack

Handycam Station DCRA-C240

Input/Output connectorA/V OUT jack: Component/video and audio

output jackUSB jack: mini-B

AC Adaptor AC-L200/L200BPower requirements: AC 100 V - 240 V, 50 Hz/60

HzCurrent consumption: 0.35A - 0.18APower consumption: 18 WOutput voltage: DC 8.4 V*



Dimensions (approx.): 48 29 81 mm (1 15/16 1 3/16 3 1/4 in.)(whd) excluding the projecting parts

Mass (approx.): 170 g (6.0 oz) excluding the power cord (mains lead)

* See the label of AC Adaptor for other specifications.

Rechargeable battery pack NP-FH60Maximum output voltage: DC 8.4 VOutput voltage: DC 7.2 VCapacity: 7.2 wh (1 000 mAh)Type: Li-ion

Design and specifications of your camcorder and accessories are subject to change without notice. Manufactured under license from Dolby Laboratories.

3



SPECIFICATIONS

These specifications are extracted from instruction manual ofHDR-CX12.

SystemVideo compression format: AVCHD (HD)/

MPEG2 (SD)/JPEG (Still images)Audio compression format: Dolby Digital 2/5.1ch

Dolby Digital 5.1 CreatorVideo signal: NTSC color, EIA standards

1080/60i specificationRecording format: Movie (HD): AVCHD

1080/60iMOVIE (SD): MPEG2-PSStill image: Exif Ver.2.2*

Image device: 5.8 mm (1/3.13 type) CMOS sensorRecording pixels (still image, 4:3):Max. 10.2 mega (3 680 2 760) pixels**Gross: Approx. 5 660 000 pixelsEffective (Movie, 16:9)Approx. 3 810 000 pixels

Effective (Still image, 16:9)Approx. 3 810 000 pixels

Effective (Still image, 4:3)Approx. 5 080 000 pixels

Lens: Carl Zeiss Vario-Sonnar T12 (Optical), 24 , 150 (Digital)

Focal length: F=1.8 - 3.1Filter diameter: 37 mm (1 1/2 in)f=4.9 - 58.8 mm (7/32 - 2 3/8 in.)When converted to a 35 mm still cameraFor movies: 40 - 480 mm (1 5/8 - 19 in.) (16:9)For still images: 37 - 444 mm (1 1/2 - 17 1/2 in.) (4:3)

Color temperature: [AUTO], [ONE PUSH], [INDOOR] (3 200 K), [OUTDOOR] (5 800 K)

Minimum illumination: 5 lx (lux) ([AUTO SLW SHUTTR] [ON], Shutter speed 1/30 second)0 lx (lux) (during NightShot function)

* Exif is a file format for still images, established by the JEITA (Japan Electronics and Information Technology Industries Association). Files in this format can have additional information such as your camcorder's setting information at the time of recording.

** The unique pixel array of Sony's ClearVid CMOS Sensor and image processing system (BIONZ) allows still image resolution equivalent to the sizes described.

Input/Output connectorsA/V Remote Connector: Component/video and

audio output jackHDMI OUT jack: HDMI mini connector

LCD screenImage: 6.7 cm (2.7 type, aspect ratio 16:9)Totaldot number: 211 200 (960 220)


Dimensions (Approx.): 48 29 81 mm (1 15/16 1 3/16 3 1/4 in.)(whd) excluding the projecting parts

Mass (approx.): 170 g (6.0 oz) excluding the power cord (mains lead)

* See the label of AC Adaptor for other specifications.

Rechargeable battery pack NP-FH60Maximum output voltage: DC 8.4 VOutput voltage: DC 7.2 VCapacity: 7.2 wh (1 000 mAh)Type: Li-ion

Design and specifications of your camcorder and accessories are subject to change without notice. Manufactured under license from Dolby Laboratories.

GeneralPower requirements: DC 6.8 V/7.2 V (battery

pack)DC 8.4 V (AC Adaptor)

Average power consumption: During camera recording using the LCD with normal brightness:HD: 4.1 W SD: 3.3 W



Dimensions (Approx.): 69 67 129 mm (2 3/4 2 3/4 5 1/8 in.)(whd) including the projecting parts69 67 131 mm (2 3/4 2 3/4 5 1/4 in.)(whd) including the projecting parts, and the supplied battery pack attached

Mass (Approx.): 370 g (13 oz) main unit only450 g (1 lb) including the supplied rechargeable battery pack

Handycam Station DCRA-C240

Input/Output connectorA/V OUT jack: Component/video and audio

output jackUSB jack: mini-B

AC Adaptor AC-L200/L200BPower requirements: AC 100 V - 240 V, 50 Hz/60

HzCurrent consumption: 0.35A - 0.18APower consumption: 18 WOutput voltage: DC 8.4 V*Operating temperature: 0C to 40C (32 F to

104 F)

4



AVCHDHD/MPEG2SD/JPEG

Dolby Digital2/5.1ch5.1

NTSCEIA1080/60i

HDAVCHD 1080/60iSDMPEG2-PS

Exif Ver.2.2*5.8 mm1/3.13CMOS: 1 020**3 6802 7604:356616938116938143508

T122415037 mmF1.8 3.1f=4.9 58.8 mm35mm40 480 mm16937 444 mm43

3 200 K5 800 K

5 lx1/300 lxNightShot * JEITA** CMOSBIONZ

/ A/V

HDMI OUTHDMI

6.7 cm2.716:9211 200960 220

6.8 V/7.2 VDC 8.4 V

HD4.1 W SD3.3 W

0 40 20 +60 69 67 129 mm69 67 131 mm

370 g450 g PRO

DCRA-C240 / A/V OUT

USBmini-B

ACAC-L200/L200B AC 100 V - 240 V50 Hz/60 Hz18 WDC 8.4 V *0 40 20 +60 482981 mm170 g* AC

NP-FH60 DC 8.4 VDC 7.2 V7.2 Wh1 000 mAhLi-ion

5 HDR-CX11E/CX12/CX12E_L2

Model information table

AbbreviationAUS : Australian modelCH : Chinese modelCND : Canadian modelHK : Hong Kong modelJ : Japanese modelJE : Tourist modelKR : Korea modelNE : North European model

Model HDR-CX11E

PALColor systemCAM PCData

copy

Destination AEP, UK, NE

HDR-CX12

NTSC

US, CND, E, KR,JE, J

Supplied accessory"Memory Stick PRO Duo" 4 GB 4 GB

4 GB : EXCEPT J8 GB : J

CAM PC

HDR-CX12E

PAL

NE, CH, AUS, HK,E, JE

6



SAFETY-RELATED COMPONENT WARNING!!

COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITHMARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTSLIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESECOMPONENTS WITH SONY PARTS WHOSE PART NUMBERSAPPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTSPUBLISHED BY SONY.

1. Check the area of your repair for unsoldered or poorly-solderedconnections. Check the entire board surface for solder splashesand bridges.

2. Check the interboard wiring to ensure that no wires are"pinched" or contact high-wattage resistors.

3. Look for unauthorized replacement parts, particularlytransistors, that were installed during a previous repair. Pointthem out to the customer and recommend their replacement.

4. Look for parts which, through functioning, show obvious signsof deterioration. Point them out to the customer andrecommend their replacement.

5. Check the B+ voltage to see it is at the values specified.6. Flexible Circuit Board Repairing

Keep the temperature of the soldering iron around 270Cduring repairing.

Do not touch the soldering iron on the same conductor of thecircuit board (within 3 times).

Be careful not to apply force on the conductor when solderingor unsoldering.

SAFETY CHECK-OUT

After correcting the original service problem, perform the followingsafety checks before releasing the set to the customer.

ATTENTION AU COMPOSANT AYANT RAPPORT LA SCURIT!

LES COMPOSANTS IDENTIFS PAR UNE MARQUE 0 SUR LESDIAGRAMMES SCHMATIQUES ET LA LISTE DES PICES SONTCRITIQUES POUR LA SCURIT DE FONCTIONNEMENT. NEREMPLACER CES COMPOSANTS QUE PAR DES PISES SONYDONT LES NUMROS SONT DONNS DANS CE MANUEL OUDANS LES SUPPMENTS PUBLIS PAR SONY.

Unleaded solderBoards requiring use of unleaded solder are printed with the lead-free mark (LF) indicating the solder contains no lead.(Caution: Some printed circuit boards may not come printed withthe lead free mark due to their particular size.)

: LEAD FREE MARKUnleaded solder has the following characteristics. Unleaded solder melts at a temperature about 40C higher than

ordinary solder.Ordinary soldering irons can be used but the iron tip has to beapplied to the solder joint for a slightly longer time.Soldering irons using a temperature regulator should be set toabout 350C.Caution: The printed pattern (copper foil) may peel away if theheated tip is applied for too long, so be careful!

Strong viscosityUnleaded solder is more viscous (sticky, less prone to flow) thanordinary solder so use caution not to let solder bridges occur suchas on IC pins, etc.

Usable with ordinary solderIt is best to use only unleaded solder but unleaded solder mayalso be added to ordinary solder.

CAUTIONDanger of explosion if battery is incorrectly replaced.Replace only with the same or equivalent type.

7



1.

2.

0

3.

4.

5.

6. 270

7. Lead Free

40

350

IC

1-1



1. SERVICE NOTE1-1. POWER SUPPLY DURING REPAIRSIn this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off sothat the unit cannot operate.These following method is available to prevent this.

Method:Use the AC power adaptor (AC-L200/L200B).

1-2. SELF-DIAGNOSIS FUNCTION

1-2-1. Self-diagnosis FunctionWhen problems occur while the unit is operating, the self-diagnosisfunction starts working, and displays on the LCD screen what todo. This function consists of two display; self-diagnosis display andservice mode display.Details of the self-diagnosis functions are provided in the Instructionmanual.

1-2-2. Self-diagnosis DisplayWhen problems occur while the unit is operating, the counter of theLCD screen shows a 4-digit display consisting of an alphabet andnumbers, which blinks at 3.2 Hz. This 5-character display indicatesthe repaired by:, block in which the problem occurred, anddetailed code of the problem.

1 13 1C

Repaired by:Refer to 1-2-3. Self-diagnosis Code Table.Indicates the appropriate

step to be taken.E.g.31 ....Reload the tape.32 ....Turn on power again.

Block Detailed Code

Blinks at 3.2Hz

C : Corrected by customerH : Corrected by dealerE : Corrected by service

engineer

LCD screenC : 3 1 : 1 1

1-2



1-2-3. Self-diagnosis Code Table

C

C

C

C

E

E

E

E

E

E

E

E

E

E

E

E

E

BlockFunction

0 4

1 3

1 3

3 2

2 0

6 1

6 1

6 2

6 2

6 2

6 2

6 2

6 2

6 2

6 2

9 1

9 4

DetailedCode

0 0

0 1

0 2

6 0

0 0

1 0

1 1

0 0

0 1

0 2

0 3

1 0

1 1

1 2

2 0

0 1

0 0

Symptom/State

Non-standard battery is used.Memory Stick Duo is unformatted.Memory Stick Duo is broken.

Media access error

Difficult to adjust focus(Cannot initialize focus)

Flash memory data are rewritten.

Zoom operations fault(Cannot initialize zoom lens.)

The abnormalities in initialization ofthe focus lens and the abnormalities ininitialization of the zoom lens occurredsimultaneously.Handshake correction function does notwork well. (With PITCH angularvelocity sensor output stopped.)Handshake correction function does notwork well. (With YAW angular velocitysensor output stopped.)Abnormality of IC for steadyshot.

IC for steadyshot and micro controllercommunication abnormality among.

Shift lens initializing failure.

Shift lens overheating (Pitch)

Shift lens overheating (Yaw)

Abnormality of thermistor.

Abnormality when flash is being charged.Fault of writing or erasing theflash memory

Self-diagnosis Code

Repa

ired

by:

Correction

Use the InfoLITHIUM battery.Format the Memory Stick Duo.Insert a new Memory Stick Duo.Remove the power source. Reconnect it again and operate yourcamcorder againRetry turn the power on by the power switch. If it does notrecover, check the focus MR sensor of lens block (pin w;, wa ofCN5101 on the LD-241 board). If it is OK, check the focusmotor drive IC (IC5201 on the LD-241 board).Make flash memory data correct value. (Note 1)Inspect the lens block zoom MR sensor (pin qh, qj of CN5101on the LD-241 board) when zooming is performed when thezoom lever is operated, and the zoom motor drive circuit(IC5201 on the LD-241 board) when zooming is not performed.

Check both C: 32: 60 and E: 61: 10 of the self-diagnosis code.

Inspect PITCH angular velocity sensors (SE9001 on the LD-241board) peripheral circuits.

Inspect YAW angular velocity sensors (SE1001 on the VC-535board) peripheral circuits.Refer to [1-3-1. E : 62 : 02 (Abnormality of IC for Steadyshot)Occurred].

Inspect the steadyshot circuit (IC5501 on the LD-241 board).Replacement of lens block. If an error occurs again, replace theLD-241 board. (Note 2)Refer to [1-3-2. E : 62 : 11 (Shift Lens Overheating (Pitch))Occurred].Refer to [1-3-3. E : 62 : 12 (Shift Lens Overheating (Yaw))Occurred].Refer to [1-3-4. E : 62 : 20 (Abnormality of Thermistor)Occurred].Checking of flash unit or replacement of flash unit.

Inspect the flash memory (IC2101 on the VC-535 board).

Note 1 : Refer to Service Manual, ADJ (1-3. DESTINATION DATA WRITE).Note 2 : When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ.

After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in thehandheld operation.

1-3



1-3. METHOD OF COPING WITH SHIFT LENS ERROR

about 330 msec

Fig. 2Change in output voltage of R5549 on the LD-241 board

Note: The length of low section will vary a little depending on theconditions.

1-3-1. E : 62 : 02 [Abnormality of IC for Steadyshot] OccurredOrder Procedure

1 Turn the power OFF.

2 While measuring with an oscilloscope the output voltage of R5549 in the periphery of IC5501 on the LD-241 board, turn thepower ON to check that the output voltage immediately after the power on change as shown in Fig. 2.

3 If the output voltage change as shown in Fig. 2, replace the lens block (Note). If it does not change as shown in Fig. 2, inspectthe camera control circuit (IC1301 of VC-535 board) periphery.

Note: When the lens block was replaced, execute a necessary adjustment items referring to Service Manual, ADJ.After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in thehandheld operation.

Fig. 1Measurement points on the LD-241 board and the VC-535 board

LD-241 BOARD (SIDE B) VC-535 BOARD (SIDE A)

IC5501

R5534R5549

IC1301

R5526

1-4



1-3-2. E : 62 : 11 [Shift Lens Overheating (Pitch)] OccurredConnect by the SeusEX and perform the following process.

Order Block Page Address Data Procedure1 11 80 7430 01 Write the data. (After it starts, set it before caution is displayed.)2 11 8E F946 F0 Write the data.3 11 8E F948 01 Write the data. (Note 1)4 11 8E F948 00 Write the data.5 11 8E F946 10 Write the data.6 11 8E F948 01 Write the data. (Note 1)7 11 8E F948 00 Write the data.8 11 80 7430 00 Write the data.

9 Check if the shift lens moves while setting the order 2 to 7. If the shift lens does not move,replace the lens block (Note 2). When the shift lens moved, proceed to the order 10.

10 While setting the order 2 to 7, measure with an oscilloscope the output voltage of R5526 in theperiphery of IC5501 on the LD-241 board to check the output voltage varies.

11 If the output voltage does not vary, replace the lens block (Note 2). When the output voltagevaried, proceed to the order 12.

12 Turn the power OFF.While measuring with an oscilloscope the output voltage of R5549 in the periphery of IC5501

13 on the LD-241 board, turn the power ON to check that the output voltage immediately after thepower on change as shown in Fig. 2.If the output voltage change as shown in Fig. 2, replace the lens block (Note 2). If it does not

14 change as shown in Fig. 2, inspect the camera control circuit (IC1301 of VC-535 board)periphery.

Note 1: Finish this operation within 10 seconds. If it is likely to take more than 10 seconds, set block: 11, page: 8E, address:F948, data: 00, and then retry.

Note 2: When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ.After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in thehandheld operation.

1-5



1-3-3. E : 62 : 12 [Shift Lens Overheating (Yaw)] OccurredConnect by the SeusEX and perform the following process.

Order Block Page Address Data Procedure1 11 80 7430 01 Write the data. (After it starts, set it before caution is displayed.)2 11 8E F947 F0 Write the data.3 11 8E F949 01 Write the data. (Note 1)4 11 8E F949 00 Write the data.5 11 8E F947 10 Write the data.6 11 8E F949 01 Write the data. (Note 1)7 11 8E F949 00 Write the data.8 11 80 7430 00 Write the data.

9 Check if the shift lens moves while setting the order 2 to 7. If the shift lens does not move,replace the lens block (Note 2). When the shift lens moved, proceed to the order 10.

10 While setting the order 2 to 7, measure with an oscilloscope the output voltage of R5534 in theperiphery of IC5501 on the LD-241 board to check the output voltage varies.

11 If the output voltage does not vary, replace the lens block (Note 2). When the output voltagevaried, proceed to the order 12.

12 Turn the power OFF.While measuring with an oscilloscope the output voltage of R5549 in the periphery of IC5501

13 on the LD-241 board, turn the power ON to check that the output voltage immediately after thepower on change as shown in Fig. 2.If the output voltage change as shown in Fig. 2, replace the lens block (Note 2). If it does not

14 change as shown in Fig. 2, inspect the camera control circuit (IC1301 of VC-535 board)periphery.

Note 1: Finish this operation within 10 seconds. If it is likely to take more than 10 seconds, set block: 11, page: 8E, address:F949, data: 00, and then retry.

Note 2: When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ.After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in thehandheld operation.

1-3-4. E : 62 : 20 [Abnormality of Thermistor] OccurredOrder Procedure

1 Turn the power ON.

2 Confirm the connections of flexible flat cables and connectors between the lens block and LD-241 board, LD-241 board andVC-535 board.

3 In case of no malfunction of connections, replace the lens block with new one (Note) . When the error has occurred in spite ofthe lens replacement, replace LD-241 board with new one.

Note: When the lens block was replaced, execute the necessary adjustment items referring to Service Manual, ADJ.After the adjustment, make sure with the STEADYSHOT turned ON that the steadyshot functions appropriately in thehandheld operation.

1-6



1-4. PRECAUTION ON REPLACING THE VC-535 BOARD

DESTINATION DATAWhen you replace to the repairing board, the written destination data of repairing board also might be changed to original setting.Refer to Service Manual ADJ, and perform DESTINATION DATA WRITE.

USB SERIAL No.The set is shipped with a unique ID (USB Serial No.) written in it.This ID has not been written in a new board for service, and therefore it must be entered after the board replacement.Refer to Service Manual ADJ, and perform USB SERIAL No. INPUT.

About the PITCH/YAW Sensor DataThe PITCH data the PITCH sensor (SE9001) on LD-241 board uses is saved in the memory on VC-535 board.Therefore, in case of replacing VC-535 board, the data for the PITCH sensor (SE9001) on LD-241 board is lost.On replacing VC-535 board, cope with one procedure as following mentioned. Replace VC-535 and LD-241 boards at the same time. Replace VC-535 board and the PITCH sensor (SE9001) on LD-241 board at the same time.

1-7



1-2. 1-2-1.

L C D

1-2-2.LCD

43.2Hz

5

1. SERVICE NOTE

1-1. 8.4Vdc10

DCACAC-L200/L200B

1 13 1C

1-2-3.

31

32

3.2Hz

C H E

LCD

C : 3 1 : 1 1

1-8



1-2-3.

CC

C

C

EE

E

E

E

EE

E

E

E

E

EE

0 41 3

1 3

3 2

2 06 1

6 1

6 2

6 2

6 26 2

6 2

6 2

6 2

6 2

9 19 4

0 00 1

0 2

6 0

0 01 0

1 1

0 0

0 1

0 20 3

1 0

1 1

1 2

2 0

0 10 0

PITCH

YAW

IC

IC

(PITCH)

(YAW)

/

MRLD-241CN5101 w;waLD-241IC5201

1

MRLD-241CN5101 qhqjLD-241IC5201

C3260E6110

PITCHLD-241SE9001

YAWVC-535SE1001

1-3-1. E6202IC

LD-241IC5501

LD-241 2

1-3-2. E6211PITCH

1-3-3. E6212YAW

1-3-4. E6220

VC-535IC2101

1ADJ1-3. DESTINATION DATA WRITE2ADJON

1-9



1-3.

2. LD-241R5549

Low

330 msec

2

1

1

2LD-241IC5501R5549

2

322

VC-535IC1301

ADJON

1-3-1. E6202IC

1.LD-241VC-535

LD-241 BOARD (SIDE B) VC-535 BOARD (SIDE A)

IC5501

R5534R5549

IC1301

R5526

1-10



1 11 80 7430 01

2 11 8E F946 F0

3 11 8E F948 01 1

4 11 8E F948 00

5 11 8E F946 10

6 11 8E F948 01 1

7 11 8E F948 00

8 11 80 7430 00

27

9 2

10

10LD-241IC5501R5526

27

112

12

12

LD-241IC5501R5549

13 2

222

14 VC-535IC1301

1-3-2. E6211PITCHSeusEX

11010118EF94800

2ADJON

1-11



1-3-3. E6212YAWSeusEX

1 11 80 7430 01

2 11 8E F947 F0

3 11 8E F949 01 1

4 11 8E F949 00

5 11 8E F947 10

6 11 8E F949 01 1

7 11 8E F949 00

8 11 80 7430 00

27

9 210

10LD-241IC5501R5534

27

112

12

12

LD-241IC5501R5549

13 2

222

14 VC-535IC1301

11010118EF94900

2ADJON

1

2LD-241LD-241VC-535

3LD-241

ADJON

1-3-4. E6220

1-12



1-4. VC-535

ADJDESTINATION DATA WRITE

USBNo.1IDUSB Serial No.

IDID

ADJUSB SERIAL No. INPUT

PITCH/YAWLD-241PITCH(SE9001)PITCHVC-535

VC-535LD-241PITCH(SE9001)

VC-535

VC-535LD-241

VC-535LD-241PITCH(SE9001)

1-13HDR-CX11E/CX12/CX12E_L2

(ENGLISH)1-5. PRECAUTION ON REPLACING

THE HOLDER (MS)(HDR-CX11E)

The model display adopts the laser printing method.Therefore, theholder (MS) for replacement differs depending on the destination.As similar displays are provided, choose the suitable one for order.

Note1: After replacing the holder (MS) , the serial number for itwill be changed to the one exclusive for service use.Inform a customer of the serial number change and change the serialnumber in the repair data.

(JAPANESE)1-5. (MS)

(HDR-CX11E)

(MS)

1: (MS)

Serial No.

Serial No.

HDR-CX11E (AEP, UK Models)

Part No.A-1556-668-A

DescriptionHOLDER (CX11E-CEH),(MS)

HDR-CX11E (North European Model)


DescriptionHOLDER (CX11E-CEL),(MS)



THE HOLDER (MS)(HDR-CX12)


Note1: After replacing the holder (MS), the serial number for itwill be changed to the one exclusive for service use.Inform a customer of the serial number change and change the serialnumber in the repair data.

Note 2: When replacing the holder (MS) for US, affix theManufacturing year label and the Factory label on the specifiedlocation as shown in the figure.The replacement caution label and inset (how to affix) are suppliedtogether with the holder (MS).

Note 3: When replacing the holder (MS) for Korea and Japanese,affix the Manufacturing year label on the specified location asshown in the figure.The replacement caution label and inset (how to affix) are suppliedtogether with the holder (MS).

(JAPANESE)1-6. (MS)

(HDR-CX12)

(MS)

1: (MS)

2:US (MS)

(MS)(

)

3:KoreanJapanese (MS)

(MS)(

)

Serial No.

Serial No.

Serial No.

Serial No.

Serial No.

Serial No.

* Manufacturing year



* Factory

HDR-CX12 (Japanese Model)


DescriptionHOLDER (CX12-J1), (MS)

HDR-CX12 (US Model)


DescriptionHOLDER (CX12-U2), (MS)

* Affix the label

* Affix the label

* Affix the label

HDR-CX12 (Canadian Model)

Part No.A-1556-659-A HOLDER (CX12-CA2),(MS)

HDR-CX12 (E Model)


Description

Description

HOLDER (CX12-E23),(MS)

HDR-CX12 (Korea Model)


DescriptionHOLDER (CX12-KR2),(MS)

HDR-CX12 (Tourist Model)


DescriptionHOLDER (CX12-JE3),(MS)

1-15EHDR-CX11E/CX12/CX12E_L2


THE HOLDER (MS)(HDR-CX12E)


Note1: After replacing the holder (MS) , the serial number for itwill be changed to the one exclusive for service use.Inform a customer of the serial number change and change the serialnumber in the repair data.

(JAPANESE)1-7. (MS)

(HDR-CX12E)

(MS)

1: (MS)

Serial No.

Serial No.

Serial No.

Serial No.

HDR-CX12E (North European Model)


DescriptionHOLDER (CX12E-CEL),(MS)

HDR-CX12E (E, Hong Kong, Australian Models)


DescriptionHOLDER (CX12E-E34),(MS)

HDR-CX12E (Chinese Model)

Part No.A-1556-664-A HOLDER (CX12E-CN2),(MS)

HDR-CX12E (Tourist Model)


Description

Description

HOLDER (CX12E-JE3),(MS)

2-1

2. DISASSEMBLY


NOTE FOR REPAIR

Make sure that the flat cable and flexible board are not cracked of bent at the terminal.Do not insert the cable insufficiently nor crookedly.

When remove a connector, dont pull at wire of connector. It is possible that a wire is snapped.

When installing a connector, dont press down at wire of connector.It is possible that a wire is snapped.

Cut and remove the part of gilt which comes off at the point.(Be careful or some pieces of gilt may be left inside)

DISCHARGING OF THE ST-201 BOARDS CHARGING CAPACITOR (C5206)The charging capacitor (C5206) of the ST-201 board is chargedup to the maximum 330 V potential.There is a danger of electric shock by this high voltage when thecapacitor is handled by hand. The electric shock is caused bythe charged voltage which is kept without discharging when themain power of the unit is simply turned off. Therefore, theremaining voltage must be discharged as described below.

Preparing the Short JigTo preparing the short jig, a small clip is attached to each end ofa resistor of 1 k /1 W (1-215-869-11).Wrap insulating tape fully around the leads of the resistor toprevent electrical shock.

Harness (coaxial cable)

Tweezers etc.

1 k/1 W

Wrap insulating tape.

NOTE FOR DISCONNECTING THE HARNESS (COAXIAL CABLE)When disconnecting the harness (COAXIAL CABLE), do notpull the harness part but pull off the connector body with tweezersetc.

ST-201 Board

ST-201 Board

Elect Cap70uF 330V(C5206)

Note: High-voltage cautions

Discharging the CapacitorShort-circuit between the two points withthe short jig about 10 seconds.To avoid the spark with the metal plate,wrap the short jig with the insulation tape.

R:1 k/1 W (Part code: 1-215-869-11)


2-1. IDENTIFYING PARTS

2-2-1. OVERALL SECTION - LCD Panel Section - Front Panel Section

2-2-4. MAIN BODY SECTION - Top Cabinet Section - MS-402 Board Section - Cabinet L Section

2-2-5. LENS/BT SECTION - VC-535 Board Block - BT Panel Section - ST-201 Board Block

2-2-2. LCD PANEL SECTION - LCD Panel Section

2-2-3. CABINET R SECTION - Hinge Block - CK-203 Board - Loud Speaker (SP901)

- DISASSEMBLY FLOW -

Lens Section LD-241 Board CM-094 Board

Top Cabinet Section PH-003 Board

BT Panel Section CR-092 Board

Cabinet R Section CK-203 Board

VC-535 Board

Cabinet L Section

LCD Panel Section PD-371 Board

MS-402 Board Section MS-402 Board

Flash Unit Section ST-201 Board

Front Panel Section


2-2. DISASSEMBLY

2-2-1. OVERALL SECTIONFollow the disassembly in the numerical order given.1 LCD Panel Section (1-1 to 1-15)2 Front Panel Section (2-1 to 2-10)

HELPHELP

EXPLODED VIEW HARDWARE LIST

1-2(#1/#14)

1-10(#2)

1-9(#2)

1-11 (#2)

1-8(#2)

1-6(#2)1-4(Claw)

1-5

1-3

1-1(Open)

1-7(Open)

1-14

1-15

1 LCD PanelSection(See Page 2-4)

2 Front PanelSection

2-1 (#2/#10) 2-7 (#2)

2-8 (#2)

2-9(#2)

2-10

2-4

2-6

2-5

2-2(Claw)

2-3

HELP01

1-12 (#2)

1-13(Claw)

Main Body Section(See Page 2-6)


2-2-2. LCD PANEL SECTIONFollow the disassembly in the numerical order given.1 LCD Panel Section (1-1 to 1-9)


PD-371

A

C

C

B

A

B1-1(#2/#10)

1-4(Claw)

1-6 (Claw)1-7 (Claw)

1-8

1-5

1-2(#2/#10)

1-3(#2/#10) Cabinet R Section

(See Page 2-5)

HELP02HELP02

1-9

1 LCD Panel Section


EXPLODED VIEW HARDWARE LIST2-2-3. CABINET R SECTIONFollow the disassembly in the numerical order given.1 Hinge Block (1-1 to 1-3)2 CK-203 Board (2-1 to 2-6)3 Loud Speaker (SP901) (3-1 to 3-2)

CK-20

3

1-3 (#2)

1-2

1-1

1 Hinge Block

3 LoudSpeaker(SP901)

2-1 (#3)

2-6 (#3)

2-2

2-4

2-5

2-3

3-1 (#3)3-2

HELP05

HELP03

HELP04

Note: On installation of the CK-203 board,adjust the position of the "NIGHTSHOT"switch and the "NIGHTSHOT" nob.

2 CK-203 Board


2-2-4. MAIN BODY SECTIONFollow the disassembly in the numerical order given.1 Top Cabinet Section (1-1 to 1-5)2 MS-402 Board Section (2-1 to 2-3)3 Cabinet L Section (3-1 to 3-5)


MS-40

2

A

A

B

B

1-1(#2)

1 Top Cabinet Section

2 MS-402 BoardSection

3 Cabinet LSection

Lens/BT Section(See Page 2-7)

2-1 (#2)

3-2(#2)

3-5 (Claw)

3-3(#11)

3-4(#2)

3-1

HELP07

HELP06

1-2 (#2)

1-3 (#2)

1-5

1-4

Note: High-voltage cautions

Discharging the CapacitorShort-circuit between the two points withthe short jig about 10 seconds.To avoid the spark with the metal plate,wrap the short jig with the insulation tape.

R:1 k/1 W (Part code: 1-215-869-11)

C5206 ST-201 Board

2-3

2-2

Note: Don't touch the grease spreading part.


2-2-5. LENS/BT SECTIONFollow the disassembly in the numerical order given.1 VC-535 Board Block (1-1 to 1-13)2 BT Panel Section (2-1)3 ST-201 Board Block (3-1 to 3-5)


ST-201

A

VC-53

5

A

1-9(#3)

1-10(#3)

1-11

1-13

1-8(#3)

1-1 (#3)

1-2 (Projection)

1-5

1-4

1-12

1-6

1 VC-535 Board Block

2 BT Panel Section

3 ST-201 Board Block

2-1 (#3)

3-1(#2)

3-2(Claw)

3-5(#3)

3-3

3-4

HELP08

1-3

1-7

Refer to page 2-1 Note for disconnecting the harness (coaxial cable).

HELPHDR-CX11E/CX12/CX12E_L2

HELPSheet attachment positions and procedures of processing the flexible boards/harnesses are shown.

HELP01

1 Fold dotted line parts of the flexible board lens barrier unit as shown in figure.

2 Insert the flexible board lens barrier unit to the groove as shown in figure.

Lens Barreier Unit

Be sure not to set the flexible boardout of upper side from groove portion(red line in the figure).

Valley fold

Flexible Board

Groove

Valley fold Flexible Board

Flexible Board


HELP02

1Claw A 1Claw A

Inner Mold

Disassembly

Remove or assemble Inner Mold in the order Claws A and B.(Note: It is the same order on removal and on assembling.)

Re-assembly

2Claw B 2Claw B

Inner Mold

Loud Speaker(SP901)

Adhesive Sheet (9 x 14mm)

Harness arrangement

CK-203 Board

HELP03

Sheild Sheet (BtoB) FP-736 Flexible Board

HELP04


1 Fold dotted line parts of the FP-737 flexible board as shown in figure.

2 Pass FP-737 flexible board through the flexible clamp as shown in figure.

3 Install the flexible clamp in the hinge assy as shown in figure.

Flexible clamp

Stopper of FP-737 flexible board

Stick it together in the adhesive tapewhile bending the FP-737 flexible board.

Unite corners.

Mountain fold

Mountain fold

Valley fold

Valley fold

Valley fold

Adhesive tape

Adhesive tape

Mountain fold

Flexible clamp

Concave side of hinge

THE METHOD OF ATTACHMENT OF FP-737 FLEXIBLE BOARD

HELP05


5 Fold dotted line parts of the FP-934 flexible board as shown in figure.

6 Install the FP-934 flexible board in the hinge cover (rear) as shown in figure.

7 Install the hinge cover (rear) in the hinge assy as shown in figure.

Valley fold

Switch

Switch

Hinge cover (rear)

Hinge cover (rear)

FP-737 flexible boardSwitch

Plate of hinge

FP-934 flexible board

FP-934 flexible board

4 Roll the FP-737 flexible board 1.5 times in the hinge assy and put it on the hinge assy with the adhesive tape as shown in figure.

1.5 times

Boss

Adhesive Tape


1

2

D

Flexible Board of the Control switch block(PS27700)

Attach the adhesive part ofthe FP-939 Flexible Board

Flexible Board of theMicrophone Unit

Flexible Board of theMicrophone Unit

LibLib

Claws

Mountain fold

Valley foldPrinted

Printed

Printed

HELP06


HELP07

1 Remove the belt bracket (rear), and remove the grip belt from the belt bracket (rear).

2 Remove the belt bracket (rear) as shown.

Belt bracket (rear)

Grip Belt

Grip Belt

CMOS Block Assy(CM-094 Board)

CM Radiation Sheet (900)Be sure not to load to CM-094 Boardand not to bend the sheet.

Lens Radiation Frame (L)

HELP08


LinkLink

3. BLOCK DIAGRAMS

OVERALL BLOCK DIAGRAM (4/5)




POWER BLOCK DIAGRAM (3/3)





3. BLOCK DIAGRAMS3-1. OVERALL BLOCK DIAGRAM (1/5) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

OVERALL (3/5)(PAGE 3-3)2

XFLASH_RST

XFLASH_RST

: VIDEO SIGNAL

CPU

(5/18, 6/18, 7/18)

IC1701(1/4)

512MSDRAM,

512M OneNANDFLASH(8/18)

MOBILE DDRSDRAM(4/18)

IC1601

VIN_C0 - VIN_C7

EMC_ADDR [0] - EMC_ADDR [12],EMC_ADDR [14], EMC_ADDR [15]EMC_ADDR [0] - EMC_ADDR [15]

EMC_XCS [1]

EMC_ADDR [0] - EMC_ADDR [15]

J13AF10

EMC_CKEEMC_CKE F3AJ15EMC_XCAS J11AE16

EMC_XRESET_OUT P11AF16

EMC_RDY0 R6AG17

EMC_XOE N10AG15

EMC_XWE J10AF17EMC_XRAS

EMC_XWEEMC_XRAS J12

EMC_XWE P7EMC_XRAS T5

AG16

EMC_CLK0_OUTEMC_XCS [1]EMC_XCAS

EMC_CLK0_OUTEMC_CLK0_IN

K11W25W26

V5, T

6, P

8, P

9,R9

, R10

,T11

, U11

,U6

, R7,

R8,

P10

,

R12,

P12

, P13

, N11

, M10

,M

11, L

10, L

11, H

11, H

10,

G11,

G10

, F11

, E13

, E12

,D1

3, P

2, P

3, N

2, N

3, P

4,P5

, N5,

N4,

J4,

H5,

H4,

G5, G

4, F

5, G

2, G

3

AJ22

, AJ2

5, A

H23,

AJ2

6,AJ

23, A

F26,

AH2

1, A

G25,

AH24

, AG2

1, A

G26,

AH2

2,AJ

24, A

G20,

AH2

5, A

D19,

AD18

, AJ2

1, A

H26,

AG1

9,AE

20, A

H20,

AH1

9, A

F18,

AE18

, AJ2

0, A

F19,

AH1

8,AE

19, A

J19,

AF2

0, A

G18

AA9,

U12

, V12

, U11

,V1

1, W

10, W

12, Y

9,Y1

1, T

10, V

9, V

10,

T11,

W11

, Y10

, Y8

R5, R

4, T

3, R

3, E

2,D4

, F4,

E4,

E3,

D3,

P6, E

5, K

5, L

4, L

5

F6, C

4, D

5, C

5,E6

, D6,

C6,

E7,

C10,

B10

, D10

, F8,

C11,

B11

, D11

, E9

T9, R

11, T

12, U

12

EMC_XDQM[0-3]EMC_XDQM[0-3]

AE17

, AH1

6,AD

17, A

H15

J5, N

13,

M4,

F13

EMC_DATA [0] - EMC_DATA [31]EMC_DATA [0] - EMC_DATA [31]

EMC_DATA [0] - EMC_DATA [15]

EMC_XCS [0] U3AG10EMC_CLK1_OUT

EMC_XRESET_OUTEMC_RDY0EMC_XOE

EMC_XCS [0]EMC_CLK1_OUTEMC_CLK1_IN

T4E8

Y25Y26

VIN_Y0 - VIN_Y7

U4, U

5, R

5, V

1,V2

, T4,

T5,

R4

B16,

B17

, C15

, D15

D16,

C16

, A15

, B15

,

D25C28D29

PCI_XGNTTS1_ARAP18AM21

H24

PCI_XINTB_AR

XIC_1301_2_COM_REQPCI_XREQFS1_AR

B23XRESET_REQ

AN20M2P5

U7

AE1

N4

OVERALL (5/5)(PAGE 3-5)

1 EXT_CAM_VDB20

CPU(CAMERA SIGNAL

PROCESS, CAMERACONTROL)(2/18, 3/18)

IC1301(1/3)

B19,

D19

, D18

,A1

9, C

18, C

19,

D17

, C17

VIN_HD, VIN_VD, VIN_FLD, EXT_CAM_CLK

Y4, Y

5,AA

1, U

1

C20,

D20

,A1

7, A

20

Y2, Y

1, V5

, V4,

W4,

W2,

W1,W

5

IC_1301_2_DDR2_XCS_0, IC_1301_2_DDR2_XWE,IC_1301_2_DDR2_XRAS, IC_1301_2_DDR2_XCAS,IC_1301_2_DDR2_CKE1, IC_1301_2_DDR2_BA_1,IC_1301_2_DDR2_BA_0, IC_1301_2_DDR2_CLK,IC_1301_2_DDR2_DCLKN

IC1301_2_DDR2_DATA_0 - IC1301_2_DDR2_DATA_31

A3 -

A5, A

7, A8

, A17

, A1

8, A2

0, A2

1, B3

- B5

,B7

, B8,

B17,

B18,

B20,

B21,

D6 -

D8, D

18 -

D21,

E6 -

E8, E

18 -

E21

R8, P

7, P8

, N7,

N8, M

7, M8

,L7

, L3,

M2, M

3, N2

, N3,

P2,

P3, R

2, A8

, B7,

B8, C

7, C8

,D7

, D8,

E7, E

3, D2

, D3,

C2,

C3, B

2, B3

, A2

IC1301_2_DDR2_ADDR_0 - IC1301_2_DDR2_ADDR_13

F3, H

1 - H

3, J1

- J3

, J7

- J9

, K1,

K3,

K7,

K9

B13,

D10,

D11,

E11,

E10,

D17,

E17,

A13,

A14

G7 -

G9, H

7 - H

9,

G1 -

G3

A6, E

9, B

16, B

19,

B6, D

9, A

16, A

19

E8, F

8, L

2, K

2, E

2,

F2, L

8, K

8

IC_1301_2_DDR2_DQS_0 - IC_1301_2_DDR2_DQS_3,IC_1301_2_DDR2_DQM_0 - IC_1301_2_DDR2_DQM_3

A11,

A12

, B11

, B12

,D1

2 - D

16, E

12 -

E16

VC-535 BOARD (1/5)

SENS_DATA_P_0 - SENS_DATA_P_7,

SENS_DATA_M_0 - SENS_DATA_M_7

SENS_DATA_P_0 - SENS_DATA_P_7,SENS_DATA_M_0 - SENS_DATA_M_7

CN1301

33

SENS_CLK_P, SENS_CLK_MSENS_CLK_P, SENS_CLK_M

XFLASH_RST

34 -

38

SENSSCK, SENS_VD, SENS_HD, IC_1301_2_SDO, SENSXCS

SENSSCK, SENS_VD, SENS_HD, IC_1301_2_SDO, SENSXCS

AJ12

- AJ

15, A

J17 -

AJ2

0,AH

12 -

AH15

, AH1

7 - A

H20

AE19

, AF1

9, AJ

23,

AC19

, AH2

2

CMOS IMAGER

IC6804

D13 -

H13

, D14

- H1

4,J1

3 - M

13, J

14 -

M14

M5,

M6,

N5 -

N7

CM-094 BOARD

FL-712 FLEXIBLE BOARD10

, 11,

13, 1

4, 16

, 17,

19, 2

0, 25

, 26,

28, 2

9, 31

, 32,

34, 3

5

6, 7,

9, 10

, 12,

13, 1

5, 16

, 21,

22, 2

4, 25

, 27,

28, 3

0, 31

3 - 7

22, 2

3

18, 1

9

CN6801

SCK, XVS, XHS, IC_1301_SDO, XCE

10M_DOAP, 10M_DOAM, 10M_DOBP, 10M_DOBM, 10M_DOCP, 10M_DOCM, 10M_DODP, 10M_DODM, 10M_DOEP, 10M_DOEM, 10M_DOFP, 10M_DOFM, 10M_DOGP, 10M_DOGM, 10M_DOHP, 10M_DOHM

DCKP, DCKM

XCLRN4 8

H13,

H14

AJ16

, AH1

6

40 SYSTEM CLOCK

A_1.8V

X130148MHz

INCKN11 1

BUFFER(2/18)

IC1303

4 2 P1

IRIS(SHUTTER)

(TO LENS BLOCK (2/2))

LENS BLOCK (1/2)

CONTROL SWITCH BLOCK(RS27700)

CAM CTRL

S002Dial_B

S001Dial_A

CN1012DIAL_B

PON SW XPON_SW XPON_SW

DIAL_B DIAL_B

DIAL_A DIAL_ADIAL_A5

4

6

S003PUSH

MANUAL

AE21AC21

AC20

DIRB0DIRA0

EN0

AC13

LENS BARRIERDRIVER(18/18)

IC5601F2E6F3D6

AF13

AE13

C30

C5C6

SHUTTER_XASHUTTER_XBSHUTTER_ASHUTTER_BLENS_COVER_OPENLENS_COVER_LED_ON

Q1003

D_2.8V

LENS_COVER_LED_ONLENS_COVER_OPEN AJ4

1

3289

4

LENSBARRIER

CN1014

B5, B

6

AB4AA5AB1

SYS_VSSSXWEN

E23

D_2.8V_AR

CX11E/CX12E

CX12R1328

R1336

IC2101

(DATA INTERFACE ANDCONTROL, MODE CONTROL)


3-2. OVERALL BLOCK DIAGRAM (2/5) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

VC-535 BOARD (2/5)

: VIDEO SIGNAL

BB_SO

CN1007

CN60

02

CN10

06

XBATT_VIEW XBATT_VIEW

FR_XRESET HI_XRESET

SOC(11/18)

D35,

E34,

D33,

D34,

D32,

C34,

B33,

C33

B17,

A17,

D18,

B18,

A18,

B19,

A20,

B21

E32,

G33,

E33,

F33

B16,

A16,

A15,

A14

G32,

G34,

F32, F3

4

D14,

B14,

D13,

A13

DR_VDATA0 - DR_VDATA7

DR_GHDATA0 - DR_GHDATA3

DR_GSDATA0 - DR_GSDATA3

H35 B15DR_GHPILOT

G35 D12DR_GSPILOT

F35DR_VINCK

E21

H1XBB_SCKBB_SO

IC_2401_C/PB_OUTIC_2401_Y_OUTIC_2401_PR_OUT

G2

U27XCS_IC_2401

G20

PANEL_O/C PANEL_O/CPANEL_O/CG24

BB_SI

XBB_SCKBB_SOBB_SIL18

PANEL_NOR/REV

PANEL_NOR/REVH25

M18M19

XCS_LCD

XCS_LCDT27

KEY_AD2 KEY_AD3KEY_AD2AJ35

KEY_AD0

KEY_AD0AH35

XBB_RST

H2E35

DR_SCK54F20J21

J1

TP_Y

TP_Y

TP_SEL2

AN34

B28 TP SELECTSWITCH

Q1701

TP_SEL1

TP_SEL1

B29

TP_X

TP_XTP_Y

TP_SEL1

TP_X

AM35

AG34AF34

MEM_SEL1MEM_SEL2

FP-735FLEXIBLEBOARD

CN1004

4, 5

, 7, 9

11

3

8

MS-402 BOARD

CN7401 CN7402

3, 4

, 5, 7

8

2

4, 5

, 7, 9

11

3

MS_SCLKMS_SCLK

MS_BSMS_BS

68XMS_INXMS_IN

AM31

AR32

MSDATA0 - MSDATA3

MSX_CLK

MSX_BS

XMS_IN

BOOT_MODE_PORT0

XBB_SCKBB_SO

XMS_INXBATT_VIEW

MSX_CLK

H23

CN1005(1/2)

12BOOT_MODE_PORT0BOOT_MODE_PORT0

AA114

UART2_SIH27

15UART2_SO

G2716

UART3_SIJ25

17UART3_SO

UART2_SIUART2_SOUART3_SIUART3_SO

K26

XMS_ACC_LED

XMS_ACC_LED

MSX_BS

MSX_BIO0 - MSX_BIO3

AM30

, AN3

3,AN

30, A

M32

MEMORYSTICK

PRO DUO

SP


FR_XRESET

K16 XTALLY_LEDY3 SIRCS_SIG

D_2.8V_PERI

R1006 R1002

R1001

D2

D_2.8V_PERI

CX11E/CX12E

CX12R1705

R1704

: VIDEO SIGNAL

: AUDIO SIGNAL

(For check)

CPC

XBB_SCK


5

OVERALL (3/5)(PAGE 3-3) 8


6

OVERALL (3/5) (PAGE 3-3)OVERALL (4/5) (PAGE 3-4)3



CPU

(5/18, 6/18, 7/18)

IC1701(2/4)

IC2401(1/2)

BB_SI

BB_SI

AA11AA9Y10

AA2AA4AA5

K2K1

FB1801

FB1802

TOUCHPANEL

2.7 INCHWIDE

COLORLCD

MONITOR

LCD901

CN6004 CN6202

CN6205CN6003

XBB_SCKBB_SOBB_SI

XBB_SCKBB_SO

XCS_LCD

VR

TP_Y

TP_SEL1TP_SEL1

TP_XTP_YTP_X

TP_SEL1

TP_YTP_X

CN6201

2

14

5

CN6203

1

TP_Y

TP_RTP_BOT

START/STOPS001

S002 (ZOOM)T

TP_X

TOUCHPANEL

I/F

Q6201, Q6202

KEY_AD

XCS_LCD

VP

21

PANEL_NOR/REV PANEL_NOR/REV13

XMS_ACC_LED D_2.8V11

1, 3

4

15

1923

17

9

7

98

1011

PANEL_R38 22

3135

33

64

5

KEY_AD0 KEY_AD0

PANEL_NOR/REV

XMS_ACC_LED

KEY_AD0

KEY_AD2

8 18

9

5

46

18

SP901(LOUD SPEAKER)

SP

CN6002

1, 2

S6007(PANEL OPEN/CLOSE)PANEL_O/C

S6003RESETFR_XRESET

S6006BACK LIGHT

S6002NIGHTSHOT

ON

OFF

S6004EASY

S6001

DISP/BATT INFO

XBATT_VIEW

LCD DRIVEIC6201

VGVB

W

T

PD-371 BOARDFP-737 FLEXIBLEBOARD

FP-736FLEXIBLEBOARD

CN6001

S001 PANEL

REVERSE( )

FR-934 FLEXIBLEBOARD

CK-203 BOARD

HOME_SW

2ND_S/S_SW

2ND_ZOOM(W)

2ND_ZOOM(T)

810

22

S6005

(PLAY)

2

3

4

HOMES004

S003W

CONTROL SWITCH BLOCK(SB27700)

1

3456

RIN 58

27282935

INIT 18

1, 2,

23, 2

47

- 10,

13,

20

- 22

12, 1

9

47

PANEL_COM

UD, LR

50

GCK1/GCK2/GSP/SSPBSSP/SCKB/SCK/PCTL

37 -

4459

, 60

PANEL_G36 23 23 GIN 57PANEL_B34 24 24 BIN 56

PANEL_VD10 15 15 PANEL_XVD 64PANEL_HD

XBB_SCKBB_SOBB_SI

XCS_LCD

PANEL_RPANEL_GPANEL_B

PANEL_VDPANEL_HD




PANEL_VDPANEL_HD

PANEL_VDPANEL_HD

BB_SO

XCS_LCDXBB_SCK

BB_SI

PANEL_VDPANEL_HD 6

21

13

11

1, 3

4

15

1923

17

9

7

38

3135

33

8

3634

106 19 19 PANEL_XHD 63

706968

BB_SI11 71

BL_H

D6206

(LCD BACKLIGHT)D6207

D6208

BL_L

D6001(MS ACCESS)

BUFFER

Q2402

(DATA INTERFACEAND CONTROL,

MODE CONTROL)



FP-935FLEXIBLE BOARD

SYS_SOUND

SP

VC-535 BOARD (3/5)

B3

VIDEO, AUDIOPROCESSOR

(14/18)

IC2801

VIDEO/D3_PR

XCS_IC_2801

CN7604

12

13

8

10

16

4

5

21

K12

XBB_SCKH12

BB_SOJ11

M10M11

L10

ADA_SOA0L9

ADA_SOA1M9

L8

M5L3

K11

K2S_C/D3_PB

L1S_Y/D3_Y

CN1006

VIDEO/D3_PR

KEY_AD3JACK_AD_CRADLE

LANC_SIG

USB_D+USB_D-

S_C/D3_PBS_Y/D3_Y

VIDEO/D3_PRS_C/D3_PBS_Y/D3_Y

J1

A1, B

1, C

1, D

1

XCS_EXH3

FR_SIJ4

FR_SOL5

WD_DISD9

XHOT_STBYE10

XFR_SCKK5

STABLE_RUNE9

XSYS_RSTXCS_EXFR_SIFR_SOWD_DISXHOT_STBYXFR_SCKSTABLE_RUN

XSYS_RSTA8

BOOT_MODE_PORT0H9

XFLASH_RST

F2

XMS_IN

FR_XRESET

VTR_DD_ON

B8

B6

XBATT_VIEWXMS_IN

XBATT_VIEWB2

J11

LANC_INL5B10

LANC_OUT LANC_SIGL4C10

FR_XRESETVTR_DD_ON

LANC_INLANC_OUT

FR_XRESETM2

M4C7

K2

F11G11A2B4

XPOWER_SWXMODE_SW

XPOWER_SWXMODE_SW

XCHARGE_LED

XCAM_LED

XCHARGE_LED

XCAM_LED

XPOWER_SWXMODE_SW

XCHARGE_LED

XCAM_LED

XPOWER_SWXMODE_SWXCHARGE_LEDXCAM_LED

JACK_AD_CRADLE

LANC PROCESSOR(17/18)

IC4901

POWER SUPPLY(16/18)

IC4703

KEY_AD1KEY_AD1

KEY_AD1

ZOOM_VR_AD

XPHOTO_LED

START/STOP

JACK_AD

CONTROL SWITCH BLOCK (PS27700)

D102(PHOTO)XPHOTO_LED

D104(QUICK ON)

W T

PHOTO

RV101

(ZOOM)

S102

S104(PHOTO FREEZE)

START/STOP

START/STOP

20XQUICKREC_LED

ZOOM_VR_AD

XPHOTO_LED

START/STOP

XQUICKREC_LED XQUICK_LED

KEY_AD1(PHOTO_FREEZE)

KEY_AD1(PHOTO_REC) S103(PHOTO REC)

(MOVIE)D103

XCAM_LED

D101

ON (POWER)

MODE

OFF (CHG)

QUICK ON

XCHARGE_LED

XPOWER_SWXMODE_SW

ZOOM_VR

18KEY_AD1

KEY_AD1

ZOOM_VR_AD

XPHOTO_LED

START/STOP

XQUICKREC_LED

S101KEY_AD1(QUICKREC)

: VIDEO SIGNAL

X490132.768kHz

L2

L3

CN7603FP-939 FLEXIBLE BOARD

A11A10

13

3

4

85

12

B9B10

INT_MIC_LINT_MIC_R

IC_2401_Y_OUTIC_2401_C/PB_OUT

M2IC_2401_PR_OUT

A9INT_MIC_F

INT_MIC_L

INT_MIC_R

INT_MIC_F

INT_MIC_L

INT_MIC_R

INT_MIC_F

INT_MIC_L

INT_MIC_R

INT_MIC_F

SHOE_MIC_FLSHOE_MIC_FR

LANC_DCM6

LANC_SIG

EXT_STROBE_ONEXT_STROBE_ON

HOTSHOE_ID1HOTSHOE_ID2

LANC_SIG


LANC_SIG



HOT

CN901

SHOE

B12C12C2

E2

CPU

(5/18, 6/18, 7/18)

IC1701(3/4)

XSYS_RSTXSYS_RST

AM34AM33








10


6

OVERALL (2/5) (PAGE 3-2)OVERALL (4/5) (PAGE 3-4) 3

R35

P29

U26N28

D22

AJ34

B22C22G23C23A22

AH34H26

M17

V2

G2

AJ33

M29M28

N29R29

JACK_AD

KEY_AD1START/STOP

L17XQUICKREC_LEDXPHOTO_LEDZOOM_VR_AD

AH33KEY_AD3ADA_FCK

ADA_BCK

ADA_LRCKADA_SIA0

SYS_SOUNDXCS_IC_2801ADA_SOA0ADA_SOA1

ADA_FCKADA_BCK

ADA_LRCKADA_SIA0

ADA_FCKADA_BCK

ADA_LRCKADA_SIA0

USB_D+W35

USB_D-V35

: AUDIO SIGNAL

CR-092 BOARD

35

CN7301

1315

2220

17

9117

(INTERFACE CONNECTOR)

PH-003 BOARD

USB_D-USB_D+

3634

CN7303

81216

31

2220

CN7302 CN001

14125311079

1695

10247

AUDIO_R_I/OAUDIO_L_I/O



LANC_SIGJACK_AD_CRADLE 26

KEY_AD3 37

333129

433537

LANC_DC8 33LANC_DC38

4648

1036

2624

CN1011 CN7601

BUFFER

Q7601 - Q7603

37



JACK_AD JACK_AD

USB_VCC

35

33

3129

1 USB_VCC

VIDEO/D3_PRS_C/D3_PB

S_Y/D3_Y

VIDEO/D3_PRS_C/D3_PB

S_Y/D3_Y

USB_D-USB_D+



LANC_SIG

LANC_SIG

JACK_AD_CRADLEKEY_AD3

LANC_DC

LANC_DC

USB_VCC 3051

13

111214

( /CHG)

A/V OUT

CN7602

3

1

MIC901MICROPHONE

UNIT( )5



3

5

7

91127

292826

1624

2218

2614

2515

1921

1723

2416

1525

2119


MODE CONTROL)



HDMI PROCESSOR(12/18)

IC2601

SOC(11/18)

IC2401(2/2)

HDMI TRANSMITTER(13/18)

IC2701

F4XHDMI_RST

C2XCS_IC_2601

J10TMDS_DATA2+

K10TMDS_DATA2-

K8TMDS_DATA1+

K7TMDS_DATA1-

K5TMDS_DATA0+

K4TMDS_DATA0-

K2TMDS_CLOCK+

K1TMDS_CLOCK-

TMDS_DATA2+TMDS_DATA2-TMDS_DATA1+TMDS_DATA1-TMDS_DATA0+TMDS_DATA0-TMDS_CLOCK+TMDS_CLOCK-

F9I2C_SDA

F10I2C_SCK

G9G10

F2XBB_SCK

D2BB_SO

D3BB_SI

E11ADA_LRCK

DE_HDMI, IDCK, HSYNC_HDMI, VSYNC_HDMI, 256FS_HDMI, ADAO2_HDMI, ADAO1_HDMI,FS_HDMI, 64FS_HDMI

E10ADA_BCK

D10ADA_FCK

C11ADA_SIA0

C4HM_FLD

C6HM_VD

C7HM_HD

G1HM74CK

E1HMCK

R21U20T21P21T20

J1, K

1, K

2,K1

2,L1

- L1

1,M

3 - M

11

A1 -

A10,

B1 -

B10,

C9, C

10,

D9, D

10

D0_HDMI - D23_HDMI

F10,

F12

, J9,

G9 -

G11,

J10

, K

10, J

12

C1 -

F1, H

1,C2

, D2,

F2,

H2

K3

TMDS DATA2+TMDS DATA2-TMDS DATA1+TMDS DATA1-TMDS DATA0+TMDS DATA0-TMDS CLOCK+TMDS CLOCK-

SDASCL

HPDHPD

TMDS_DATA2_+TMDS_DATA2_-TMDS_DATA1_+TMDS_DATA1_-TMDS_DATA0_+TMDS_DATA0_-TMDS_CLOCK_+TMDS_CLOCK_-

SDASCL

HPDQ2704

LEVEL SHIFT

CN1008

1614131110

FP-937 FLEXIBLE BOARD

171920

2

65

CN1001

689

1112

532

19

1516

HDMIOUT

Y19,

AA19

, Y18

,AA

18,Y1

7, AA

17,

Y16,

AA16

Y15,

AA15

, Y14

,AA

14, Y

13, A

A13,

Y12,

AA12

U21,

V20,

V21,

W20

, W21

, Y20

,Y2

1, AA

20

HM_R0 - HM_R7

A9, A

10, B

9 - B1

2,C1

2, D1

2A5

- A8

,B5

- B8

A2 -

A4, B

2 - B

4, C

1, D1

HM_Y0 - HM_Y7

HM_B0 - HM_B7

CPU

(5/18, 6/18, 7/18)

IC1701(4/4)

WAVEFORM SHAPER,BUFFER (5/18)

IC1702

PCI PROCESSOR(9/18)

IC2201

XCS_IC_2601T26

XHDMI_RSTA28

IC_2201_ADATA

CLK_SYS_OUT_IC_2201

CLK_

SYS_

OUT_

CEC

HDMI_JACK_INH28

G7

I2C_SCKAR12

H10CEC_INT

CEC_INTD31

I2C_SDAAR13

MOBILEDDR SDRAM

(10/18)

IC2301

M32

, M33

,L3

2 - L

34, K

32,

K33,

J32

AA10

, AA1

1,AB

9 - A

B11,

AC9,

Y8,

Y11

IC_2201_DATA0 - IC_2201_DATA7

IC_2201_FLD, IC_2201_IVCLK,IC_2201_MCK, IC_2201_LRCK

IC_2201_DDR_DQS0 - IC_2201_DDR_DQS3,IC_2201_DDR_DQM0 - IC_2201_DDR_DQM3

K34,

K35

,H3

2, H

33

IC_2201_DDR_D00 - IC_2201_DDR_D31

AB12

, AB1

6,AC

8, AC

16

AA16J33

IC_2201_SYSCLK

AC12

AC13L35

PCI_XREQFS0_ANB2AM20

PCI_XGNTTS0_ANB3AP17

PCI_XINTA_ANA3AR20

B3

X170112MHz

A_2.8V

3 4

WAVEFORM SHAPER,BUFFER(5/18)

IC1705

3 4

AC21

, AB2

1, AB

22,

AA21

- AA2

3, Y2

1, Y2

2,U2

0 - U2

2, V2

1 - V2

3, W2

2,W2

3, E2

1, F2

0 - F2

3, G2

2,G2

3, H2

1, B2

1, B2

2,C2

1 - C2

3, D2

1 - D2

3

A2, A

8, B2

, B3,

B7, B

8, C2

, C3

, C7,

C8, D

2, D3

, D7,

D8,

E3, E

7, L3

, L7,

M2, M

3, M7

, M8

, N2,

N3, N

7, N8

, P2,

P3,

P7, P

8, R2

, R8

IC_2201_DDR_A00 - IC_2201_DDR_A13

N21,

M21,

M22,

L21 -

L23,

K22,

K23,

R20,

R22,

P20 -

P23

F3, H

1 - H

3, J1

- J3

, J7

- J9

, K1,

K3,

K7,

K9

Y23,

W21

, U23

, T23

,H2

2, H

23, E

22, E

23

E2, E

8, F

2, F

8, K

2,K8

, L2,

L8

N23,

M23,

N22,

K21,

J21,

H20,

J22,

R21,

T22

G1 -

G3, G

7 - G

9,

H7 -

H9

VC-535 BOARD (4/5)

FP-940FLEXIBLEBOARD

ST-201 BOARD FLASH UNIT

ST_UNREG

Q5201SWITCH

XENO

N LA

MP

8

47

6

FLASH/CHARGE

CONTROL

IC5201

XE_A

XE_K

XE_A

XE_K

+

C5206

( )CHARGINGCAPACITOR

( )LENS ADAPTORDETECT

D5202

5

62

1

4

3

1

2

T5201

XSCHARGE_FULLSTROBO_ON

SCHARGE_ONCN5202

67

ADAPTER DETECT8 ADAPTER DETECTADAPTERDETECT

5

CN1003

1110

9

12

CN5201

15 -

185

- 8

2ADAPTOR_DET ADAPTOR_DET

STROBE_ONXSTRB_FULL

STRB_CHARGE

L5201

S001

AP9


OVERALL (2/5) (PAGE 3-2)OVERALL (3/5) (PAGE 3-3) 3



E2SPDIF_O

SPDIF_OAA17

J8CEC

SDASCLCEC

SDASCLCEC CEC

8 14

XIC_2201_DDR_CLK, IC_2201_DDR_CLK,XIC_2201_DDR_CS0, XIC_2201_DDR_RAS,XIC_2201_DDR_CAS, XIC_2201_DDR_WE,IC_2201_DDR_CKE1, IC_2201_DDR_BA0,IC_2201_DDR_BA1

T3, M

3,J2

, E2

M4K2K4M1L2M2K3K1H1J1

A4

W3,

W2,

V2, V

1,U1

- U3,

T1, T

2, R3

,R2

, P1 -

P3,

N1, N

2,H2

- H4

, G2 -

G4,

E4,

E1, D

1 - D

4, C1

- C4

PCI_AD0 - PCI_AD31

PCI_XBE0 - PCI_XBE3

AM16

, AN1

6AM

17, A

P15

PCI_PARAM15

PCI_XFRMAN13

PCI_XTRDYAN14

PCI_XSERRAM13

PCI_XDEVSELAM14

PCI_XPERRAN17

PCI_XSTOPAR19

PCI_XIRDYAR21

PCI_XRESETAP19

PCI_CLKAR16AR17

PCI_CLKRUN

PCI_AD0 - PCI_AD31

PCI_XBE0 - PCI_XBE3

PCI_PARPCI_XFRMPCI_XTRDYPCI_XSERR

PCI_XDEVSELPCI_XPERRPCI_XSTOPPCI_XIRDY

PCI_XRESETPCI_CLK

PCI_CLKRUNAM19

AR22

- AR

29,

AM22

- AM

29,

AN15

, AN2

2 - A

N29,

AP22

- AP

29

PCI_AD0 - PCI_AD31

PCI_XBE0 - PCI_XBE3

PCI_PARPCI_XFRMPCI_XTRDYPCI_XSERR

PCI_XDEVSELPCI_XPERRPCI_XSTOPPCI_XIRDY

PCI_XRESETPCI_CLK

PCI_CLKRUN

CPU(CAMERA SIGNAL


IC1301(2/3)

L4, K

1,K2

, M4

K5, K

4, J1

, J2,

M7, J

5, J4

,H1

, K7,

H2, L

7, H5

, H4,

G1,

G2, J

7, G5

, G4,

F1, F

2, H7

,F5

, F4,

E1, G

7, E2

, E4,

E5,

D1, D

2, D4

, D5,

N2

N1L5M5L2N7L1P7M1P4N5P2

HDMI_JACK_IN


MODE CONTROL)



VC-535 BOARD (5/5)FP-941FLEXIBLEBOARD

ZOOM AND FOCUSDRIVE(2/4)

IC5201

DIRB1DIRA1

J9M9

EN1

DIRB1DIRA1

EN1

NF_SWM8 AF7

CAM_UART_TXDAH2CAM_UART_RXDAH3IC_1301_2_CSAB11

XRST_IC_5201_1H11 AF5AC1XCAM_SCKH12

CAM_SOJ11CAM_SIK11XCS_IC_5201_1IC_5201_1_VDIC_5501_CLK

XCAM_SCKCAM_SOCAM_SIXCS_IC_1301_1J12

NF_SWXRST_IC_1301_1

K12

Y7AB5AC2

LENS_TEMP_AD AE11

CN5101

THERM THERM

L12

STEADYSHOTPROCESSOR

(3/4)

IC5501

PITCH/YAWSENSOR AMP,

G SENSE DRIVER(4/4)

IC9001

INVERTER(3/4)

IC5504

PITCH SENSOR(3/4)

IC5502

XSYS_RST XSYS_RST

LENS_TEMP_AD

IC_5501_SOIC_5501_SIXCS_IC_5501IC_5501_SCK

IC_1701_SOIC_1701_SIXCS_IC_1701IC_1701_SCK IC_1701_SCK

EXT_CAM_VD

A7

XRST_IC_5501_CPU

A4B4A5B5

C9

YAW_AD YAW_GYRO_OUTPITCH_AD

J5G5

VST_C_RESETD5

72

C2

B3B4

PWM_OUT_PITCH1PWM_OUT_YAW

INA_PITCHINB_PITCH

INA_PITCHINB_PITCH

YAW SENSOR(3/4)

IC5503C2

B3B4 INA_YAW

INB_YAWINA_YAWINB_YAW

6F2F9

YAW_GYRO_OUT

VREF_BEADS

YAW_GYRO_OUT

VREF_BEADS

IC_1701_CLK

LENS_TEMP_ADTHERM

IC_1701_SOIC_1701_SI

XCS_IC_1701

IC_1701_CLKIC_5501_CLK

XSYS_RST

IC_5501_SOIC_5501_SI

XCS_IC_5501IC_5501_SCK

EXT_CAM_VD

XRST_IC_5501_CPU

IC_5501_CLKA3

EXT_CAM_VD

IR_LED_ONNS_LED_KEY AH4

STRB_CHARGEAC11XSTRB_FULLAJ5


11




STROBE_ONAE20

EXT_CAM_VD EXT_CAM_VDAF20


1

XRST_IC_1701_CPU XRST_IC_1701_CPU AB10

XSYS_RST

STRB_CHARGEXSTRB_FULLSTROBE_ON

XSYS_RST

IC1301(3/3)

CN5103 CN1002

3839

37

87

9

35 1134 1242 440 641 543 3

IC_1301_1_VD

DIRB1DIRA1

EN1

XCAM_SCKCAM_SOCAM_SI

XCS_IC_1301_1

NF_SWXRST_IC_1301_1

IC_1301_1_VD AC1845

242325

1

33 1321 25

27

26222321

20

19

28 18

22 24

16 30

18 28

12 34L9

, K9

32

2930

14

1716

AC23AF22

AJ26

AE9

AA7

AC4AD2

AJ3

AD1

D1301EXT_STROBE_ON EXT_STROBE_ON

AC22

D1302

AC5

A6

G2E2

SE9001(PITCH)

2017

6

4

SE1001(YAW)

4

1

16 10

VREF_BEADS14G9E9

CN1005(2/2)

4567

2

CPC

(FOR CHECK)

IC_1301_2_CSIC_1701_SI

IC_1701_SOIC_1701_SCK

CAM_UART_TXD

3CAM_UART_RXD

I_DRIVE I_DRIVE

I_BIAS

I_HALL

ND_DRIVE

ND_BIAS

I_BIAS

I_HALL

ND_DRIVE

ND_BIAS

ND_HALL ND_HALL

FOCUS FOCUS

F_MR_A,F_MR_B

F_MR_A,F_MR_B

ZOOM_A,ZOOM_B,ZOOM_XA,ZOOM_XB

ZOOM_A,ZOOM_B,ZOOM_XA,ZOOM_XB

NF_DRIVE NF_DRIVE

TEMP_OUT LENS_TEMP_AD

Z_MR_A,Z_MR_B

Z_MR_A,Z_MR_B

I_DRIVE

I_BIAS

I_HALL

ND_DRIVE

ND_BIAS

ND_HALL

FOCUS

F_MR_A,F_MR_B

ZOOM_A,ZOOM_B,

ZOOM_XA,ZOOM_XB

NF_DRIVE

Z_MR_A,Z_MR_B

H

M

IRISMOTOR

MFOCUS MRSENSOR

ZOOM MRSENSOR

FOCUS MOTOR

ZOOM MOTOR

M

LENS TEMPSENSOR

H

M

ND FILTERMOTOR

MNF MOTOR

19

7, 1

2, 4

3, 5

14, 8

9, 1

110

, 12

23, 2

421

, 20

51-4

816

, 17

28-2

5

YAWMOTOR M

HALLELEMENT

40 -

43

OIS TEMPSENSOR

THERM THERM

PITCHMOTOR M

HALLELEMENT

OPTICAL IMAGE STABILIZER

YAW YAW

YAW_OUT YAW_HALL

PITCH PITCH

PITCH_OUT PITCH_HALL PITCH_HALL

PITCH_IN PITCH_HALLBIAS PITCH_HALLBIAS

33, 3

236

, 37

38

47 -

44

YAW_IN YAW_HALLBIAS

YAW_HALL

YAW_HALLBIAS

34, 3

530

, 31

(TO LENS BLOCK (1/2))

LENS BLOCK (2/2)

XTALLY_LED

NS_LED_K

SIRCS_SIG

F_TALLY_LED

NS_LED_K

SIRCS_SIG

H1, J

1C6

, A5

C5, B

6K2

, L2

A11,

A9C1

0, B1

1L6

, L7

D2, A

2D2

, A2

J9, J

7G6

, J8

H2, J

4J3

, J2

E12,

E10

K6, F

1, L4

, G3

B1, C

4F3

, E3

NF_EN

DIRB1DIRA1

EN1

NF_SWXRST_IC_5201_1

XCAM_SCKCAM_SOCAM_SI

XCS_IC_5201_1IC_5201_1_VD

NF_ENL8AC9NF_EN

NF_EN4

1336 10

EX OR(1/18)

IC1002

LD-241 BOARD

REMOTE SENSORIC6503

4


XTALLY_LED

NS_LED_K

SIRCS_SIGXTALLY_LEDSIRCS_SIG

D6503(NIGHTSHOT)

6

1

D6502(CAMERA RECORDING)

8

CN5104

Q1002

NIGHTSHOTDRIVE

CPU(CAMERA SIGNAL



3-6. POWER BLOCK DIAGRAM (1/3) ( ) : Number in parenthesis ( ) indicates the division number of schematic diagram where the component is located.

FAST

_CHA

RGE

CN1009

BATT

_UNR

EGAC

V_UN

REG

ACV_UNREG_CN

VC-535 BOARD (1/3)

FP-942FLEXIBLEBOARD

FP-949FLEXIBLEBOARD

CR-092BOARD

FP-935FLEXIBLEBOARD

FP-948FLEXIBLEBOARD

CN1006

1 - 9

BATT/XEXT_CN

REG_GND14

9 - 1

31

- 6

CN7301CN7303

24BATT/XEXT_CRBATT/XEXT_CR

ACV_UNREG_CNACV_UNREG_CN22

51

INIT

_CHA

RGE

Q4601,

Q4605, Q4606Q4602Q4603,Q4604

D4603

BATTERYBH001

( )TERMINALBOARD

BATT_UNREG_CN

BATT_SIG BATT_SIG

REG_GND

+

C

-

8

1 - 6

9 - 1

4

IO_BL_UNREG

CORE_UNREG

ACV_UNREG

SYSTEM_UNREG

CLAM

P_ON

MT_5.0V

F4607

F4605

F4606

F4609

VOUT

VBBIN

L2

WAKE_UPL6

P71_INT01C7P53E11P52F10

SIO2

P37_AN07P40_AN08

A4

BATT/XEXT_CNFAST_CHARGEINIT_CHARGE

LANC PROCESSOR(17/18)

IC4901

POWER SUPPLY(16/18)

IC4703

P05_INT09B1

P06_INT10C2BATT/XEXT_CR

R4930

R4934

XUNREG_RESET

XUNREG_RESET

ACV_UNREG

VBACKUPM1

BATT_UNREGL1

P23 XLANC_ONH2P07_INT11 XLANC_PWR_ONC1

P22 G2P61_PPG11 C11

P31_AN01

VCC1VCC2

AVR

AVCC

P11_SO1P12_SCK1

P10_SI1 DOUT

P21_PPG01

L6P30_AN00 J5

CLAMP_ONLOAD_ON_FR

L4728

L4730

A POWER (2/3) (PAGE 3-7)POWER (3/3) (PAGE 3-8)

B POWER (3/3)(PAGE 3-8)

VOUT VOUT

XLANC_ONM5BATT_INM3P70_INT00 BATT_INA7

F4611

LOAD

_ON

F4610 ST_UNREG

VLDO3 B10

VRO L3CH6_SW C4

BATT_IN_SEL N4

VLDO2 B9

L4706 IC_1301_2_D_1.2V

L4703

EVER_3.0V

BL_L

EP_8.5V

SHOE_UNREG SHOE_UNREG

ST_UNREG

F4602

BATT

/XEX

T_CN

BATT_LI_3V

G1, D

1, D

2, C

3

L7, L

9, L

8, N

7

B11,

J2,

K10

, L10

DINCLKLD

FR_EVER_SI, FR_EVER_SO, FR_EVER_SCK, XCS_DD

CN1010

USB_VCCUSB_VCC

LANC_DC

LOAD SWITCH SIG GEN

Q4701

PVDD5bPVDD5a

M8,

N8

L4708 L4735

L4726

PVDD4bLX4a AU_2.8V

A_2.8V

L4713 D_2.8V

EP_4.6VL4723

L4710 EP_2.8V

IC_2201_D_1.2V

D_1.2V

LX4b

PVDD4a

B8, A

8B7

, A7

LX5aLX5b M

9, N

9

PVDD1bPVDD1a

L12,

L13

LX1aLX1b K1

2, K1

3

D_1.8V

A_1.8V

L4712

L4727 D_3.3V

L4733 A_4.6V

L4718

L4707PVDD3bPVDD3a

B2, B

1

LX3aLX3b C2

, C1

CMOS_A_3.3VL4714

USB_3.3V

L4704

L4701

LOAD SWITCHQ4707

PVDD6bPVDD6a

B3, A

3

LX6aLX6b B4

, A4

MUTEQ4711

L4702 A_1.2VPVDD2bPVDD2a

G12,

G13

LX2aLX2b F1

2, F1

3

BL_H

OUT8 B13-INA D12

SWITCHQ4702

Q4703

37 -

45

1

35

1 - 4

30

38 LANC_DC

LANC_DC

LANC_DC

LANC_DC

833

(INTERFACE CONNECTOR)

CN7302

7

CN001

4A/V OUT

BATT_UNREG

BATT_LI_3V

LANC_DCM6

CH1_SEL K11

POWER ON RESET(16/18)

IC4701

2VDDOUT1

DC INJ001

IN6 C5

PVDD9 A10DVDD2 M13PVDD7 G1AVDD1 H1

ACV_UNREG K1

IN5 L10

IN4 C8

IN3 D3

IN2 G11

IN1 L11

4.6V REG(16/18)

IC4706

43

IN1 CE

OUT

D_1.5V

1.5V REG (16/18)

IC4705

51 VDD VOUT

D4703

N2

GENERAL_ADK11

D_2.8V

R100

7

R100

3R1

004

SYSTEM_ADK8

CX11E

R100

8

CX12/CX12E



CONTROL SWITCH BLOCK (PS27700)

MODE_LED_VDD

CHARGE_LED_VDD

D_2.8V

MODE_LED_VDDD_2.8V D_2.8VD_2.8V

CHARGE_LED_VDDEVER_3.0VEVER_3.0V

D_2.8V

VC-535 BOARD (2/3)

SWITCHQ2801

VIDEO, AUDIOPROCESSOR

(14/18)

IC2801

L2803

L2801

R2804

AU_2.8V

D_2.8V

MT_5.0V

A_2.8V

A_2.8V

L2802

A_4.6V

A_4.6V

POWER (1/3)(PAGE 3-6)

A

SHOE_UNREG

CN7604

11

9

15RV101

(ZOOM)

T W

SHOE_UNREGSHOE_UNREG

EVER_3.0V

SHOE_UNREGR7616

R7612

R7613

R7611

MICVCC

MICVCC

6, 7

CN7603

FP-939 FLEXIBLEBOARD

HOT

CN901

SHOE

FP-940FLEXIBLEBOARD

FP-938 FLEXIBLE BOARD PH-003 BOARD

ST_UNREG ST_UNREG ST_UNREG

BATT_LI_3V

XE_A

MT_5.0V MT_5V

ST-201 BOARD FLASH UNIT

CN5202D5202

T5201

L5201

FLASH/CHARGE CONTROL

IC5201

181

- 3

CN1003

1

3

14 -

16

CN1011 CN7601

17

20

21

31 -

34

23

20

6 - 9

CN5201

15-1

8

XENONLAMP

PCIPROCESSOR

(9/18)

IC2201

A_1.8V

D_1.8V

IC_2201_D_1.2V

A_1.8V

IC_2201_D_1.2V

D_3.3V

D_2.8V

L1002

D_2.8V

MT_5.0V

A_2.8V

L5601

FL2603

D_3.3V

HDMITRANSMITTER

(13/18)

IC2701L2701

L2702

D_1.8VD_1.8V

D_3.3V

HDMIPROCESSOR

(12/18)

IC2601

LENS BARRIERDRIVER(18/18)

IC5601

D_2.8V FB2601

FB2801

D_1.5VD_1.5V

FP-937 FLEXIBLE BOARDCN1008

3, 4

CN1001

18ST_UNREG+5V_POWER

D_2.8V

5V REG (13/18)

IC2702

451 HDMI

OUT

16

1

2

14

17

3

PD-371 BOARD

CN6202

LCD DRIVE

IC6201

28

CN1007 CN1006

16

20

28

16

20

EP_8.5V

BL_H

EP_2.8V

D_2.8V

EP_8.5V

BL_H BL_H

EP_2.8V

D_2.8V

EP_8.5V VDDG

EP_2.8V

EP_4.6V VDD

30BL_L

D_2.8V

EP_8.5V

EP_2.8V

BL_LBL_LBL_HBL_CONT

FP-736FLEXIBLEBOARD


CN6003CN6002

30

16

1

314

26 26 17

CK-203BOARD

CN6004

17

11

CN6205

LCD901

EP_4.6V EP_4.6V

D_2.8V

EP_8.5V

BL_-V

EP_2.8V

BL_CONT

EP_4.6V EP_4.6V

BL_H

D_2.8V

EP_8.5V

EP_2.8V

BL_L

EP_4.6V

VSS

TOUCHPANEL I/F

Q6201, Q6202

2.7 INCHWIDE

COLORLCD MONITOR

L6202

L6203

L6201

D101( /CHG)

QUICKREC_LED_VDDQUICKREC_LED_VDD 19

D104(QUICK ON)

(MOVIE)

(PHOTO)

D6001(MS ACCESS)

D102

D103

15

B+ SWITCHQ6211

B+ SWITCHQ6212

R6260

D6206 - D6208(LCD BACKLIGHT)

FB6201

218

28

16

2030

26

1818

28

16

2030

26

18

BATT_LI_3VBATT_LI_3V 16BT5301

( )LITHIUM STORAGEBATTERY

FL2601

FL2701

A_4.6V

MICVCC

A_4.6V

3839

BUFFER

Q7601 - Q7603

SWITCHQ6207, Q6210



FP-735FLEXIBLEBOARD

VC-535 BOARD (3/3)

CPU(DATA INTERFACE

AND CONTROL,MODE CONTROL)(5/18, 6/18, 7/18)

IC1701

FB2401

FB2402

SOC(11/18)

IC2401

512M SDRAM,512M One NAND FLASH

(8/18)

IC2101

SE1001(YAW)

D_3.3V

D_2.8VD_1.8V

D_2.8V D_2.8V

D_1.2V

A_2.8V

A_2.8V

MT_5.0V

I/O_1.8VD_1.8V

CMOS_A_3.3V

A_2.8V

D_3.3V

D_2.8V

A_2.8V

USB_3.3V

FB1701

FB1702

MOBILEDDR SDRAM

(4/18)

IC1601

MOBILEDDR SDRAM

(10/18)

IC2301

L2401

L2403

CN1005

9, 1

0

A_1.2V

A_2.8V

D_1.8V D_1.8V

A_2.8V_AR

A_1.2V_AR

D_1.8V D_1.8V

USB_VCC

MS_VCC

CN1004

MS_VCC VCC

13 -

14

13 -

14

MEMORY STICK 2.9V REG(1/18)

IC1001

VOUTCEVDD

134

Q1001

D_1.5V

H20GPIO_S[14] MS_PWR_ONMS_PWR_OND_3.3V

G25GPIO_S[2] XVBUS_DET XVBUS_DET

CN7401

CN6801

MS-402 BOARD

CM-094 BOARD

CN7402

9MEMORY

STICKPRO DUO

(CAMERA RECORDING)D6502

CPC

(FOR CHECK)

A_2.8V

A_1.8V A_1.8V

CPU(CAMERA SIGNAL

PROCESS, CAMERACONTROL)

IC1301

(2/18, 3/18)

D_2.8V D_2.8VIC_1301_2_D_1.2V

D_3.3V D_3.3V

A_1.2V

IC_1301_2_D_1.2V

D_1.2V D_1.2V

A_1.2V

A_2.8V

A_1.2V

2.7V REG

IC6803OUTIN 34

CE1 CMOS IMAGERIC6804

CMOS_A_3.3VD_1.8V

A_2.7V

LVDS_I/O_1.8VD_1.8V

LVDS_I/O_1.8V

373839


REMOTE SENSOR

IC6503

VCC1

CN1301

4

23

L1501

A_2.8V A_2.8V

A_2.8V

L1502

STEADYSHOTIC5501

PROCESSOR(3/4)

MT_5.0VD_1.5V

D_2.8VMT_5.0V

D_2.8V

R5101

ZOOM AND FOCUSIC5201

DRIVE(2/4)

D_2.8V FB5201

MT_5.0VMR_A2.8V

MR_A2.8V

MR_A2.8VMR_A2.8V

MR_A2.8V

PITCH/YAWSENSOR AMP, G

SENSE DRIVER (4/4)

IC9001

D_2.8V

INVERTER (3/4)IC5504

8

L9001

PITCH SENSOR, YAW SENSOR (3/4)IC5502 IC5503

C4

D_2.8V VCC

2.8V REG (2/4)IC5205

IN 3OUT

VCCA3 PS

MT_5.0V B1 VM

CN1002

R1010,R1011

CMOS_A_3.3VCMOS_A_3.3V

D_2.8V

D_1.5V

MT_5.0V

D_2.8VA_2.8VA_2.8V

NS_LED_ANS_LED_A

D_1.5V

MT_5.0V

FP-941FLEXIBLEBOARD

LD-241 BOARD

38

39

42, 4

3

41

40

15

CN5103

8

7

3, 4

5

6

CN5101

LENSBLOCK

15

22

D_2.8V SIRCUS_VDD

TALLY_VDDTALLY_VDD

NS_LED_A

CN5104

(NIGHTSHOT)D6503NS_LED_A

7

5

2

CMOS_A_3.3V4

CE1


A


B

L1301

L1001

L1302BUFFERIC1303

(2/18)5

D_2.8V

D_1.8V

EX OR(1/18)

IC1002

BUFFERWAVEFORM SHAPER,

IC1702

(5/18)

BUFFERWAVEFORM SHAPER,

IC1705

(5/18)

31

SE9001(PITCH)


4-1. FRAME SCHEMATIC DIAGRAM

FRAME

4. PRINTED WIRING BOARDS AND SCHEMATIC DIAGRAMS

c- -


BH001(BATTERY TERMINAL BOARD)

14

1

14

1

FP-736FLEXIBLEBOARD

FP-934FLEXIBLEBOARD

FP-938FLEXIBLEBOARD

CN1006

CN6002

CN901(HOT SHOE)

ActiveInterface Shoe

TOUCH PANEL

LCD901

2.7 INCHWIDE COLOR

LCD MONITOR

BT5301LITHIUM STORAGE

BATTERY( )

BH5301BATTERYHOLDER( )

( )C5206

CHARGINGCAPACITOR

1 14

411

422

4443

CN7302

CN7303INTERFACE

CONNECTOR( )

2 144 4

5CN

7301

2144

1

250

51

45

CN51

01CN51

03

CN51041 8

12

11

1 14

10 1

CN7402MEMORY STICK

DUO CONNECTOR( )CN7401

1 6

16

1

1 24

24

CN6201

CN6202

CN6203

CN6205

382

391CN7601

141

1

16

20

CN7602

CN76

03

CN76

04

18

18

1

1

CN52

01

CN5202

1CN

6801

40

4142

IC6804(Not supplied)

IC6803(Not supplied)

CM-094 BOARD(SIDE A)

1

2

19

20

1116

2

39

40

1

2

13

14

1

139238

2

13

14

1 1 1 4014

5

26

1

2

9

10

41 42

CN1003

CN1004

CN1005

CPC(FOR CHECK)

CN1007

VC-535 BOARD(SIDE A)

CK-203 BOARD(SIDE A)

CK-203 BOARD(SIDE B)

PH-003 BOARD(SIDE B)

PH-003 BOARD(SIDE A)

PD-371 BOARD

LEVEL 3

LEVEL 3

CN10

09

HARNESS (COAXIAL CABLE)

CN10

10

CN1011

CN10

12

FP-712 flexible board is not supplied,but this is included in LENS BARRIER UNIT.

CN10

14

CN1301

VC-535 BOARD(SIDE B)

LEVEL 3

LD-241 BOARD(SIDE B)

LEVEL 3

LD-241 BOARD(SIDE A)

LEVEL 3

2 144 4

5

1

1

1

22

14

1

22

51

2 50

CN10

02IC2101(Not supplied)CN1006

CN10

08

S6001

S6003

S6004 S6005

(PLAY)

S6006

BACK LIGHT

S6007PANEL

OPEN/CLOSE( )

21

1

6

16

1

2

39

40

24 1

CN60

01

CN60

02

S001(PANEL REVERSE)

CN6003

CN6004

S6002

CM-094 BOARD(SIDE B)

LEVEL 3

CR-092 BOARD(SIDE A)

MS-402 BOARD(SIDE A)

MS-402 BOARD(SIDE B)

CR-092 BOARD(SIDE B)

ST-201 BOARD







FP-7

35 F

LEXI

BLE

BOAR

D




FLASHUNIT

119

23 22

21 20

HDMI OUTCN1001

16

29

10

73

84

511

12

13

14

CN001A/VOUT

LENSBLOCK

LENSBARRIER

18

CONTROLSWITCHBLOCK

(PS27700)

CONTROLSWITCHBLOCK

(RS27700)

DC INJ001


139

240

139

240

MIC901MICROPHONE

UNIT( )

SP901(LOUD SPEAKER)

CONTROLSWITCHBLOCK

(SB27700)NIGHTSHOT

EASY

RESET

DISP/BATT INFO

OFF ON

4-2. SCHEMATIC DIAGRAMS


LinkLinkPD-371 BOARD(LCD DRIVE)

FP-934 FLEXIBLE BOARD(PANEL REVERSE)FP-935 FLEXIBLE BOARD(A/V CONNECTOR)

FP-937 FLEXIBLE BOARD(HDMI CONNECTOR)FP-938 FLEXIBLE BOARD(PH-VC CONNECTION)FP-939 FLEXIBLE BOARD(HOT SHOE)FP-940 FLEXIBLE BOARD(ST-VC CONNECTION)

FP-942 FLEXIBLE BOARD(CR-VC CONNECTION)

FP-941 FLEXIBLE BOARD(LD-VD CONNECTION)

FP-948 FLEXIBLE BOARD(BATTERY TERMINAL)FP-949 FLEXIBLE BOARD(DC IN)CONTROL SWITCH BLOCK(PS27700)CONTROL SWITCH BLOCK(RS27700)CONTROL SWITCH BLOCK(SB27700)

FLASH UNIT

CK-203 BOARD(CONTROL SWITCH)ST-201 BOARD(FLASH DRIVE)

PH-003 BOARD(MIC, HOT SHOE EXTENSION BOARD)

CR-092 BOARD(INTERFACE CONNECTOR)

MS-402 BOARD(MS CONNECTOR)FP-712 FLEXIBLE BOARD(BARRIER UNIT CONNECTION)FP-735 FLEXIBLE BOARD(MS-VC CONNECTION)FP-736 FLEXIBLE BOARD(CK-VC CONNECTION)FP-737 FLEXIBLE BOARD(PD-CK CONNECTION)FP-933 FLEXIBLE BOARD(REMOTE SENSOR)

COMMON NOTE FOR SCHEMATIC DIAGRAMS


4-2. SCHEMATIC DIAGRAMS4-2. SCHEMATIC DIAGRAMS

4-2. SCHEMATIC DIAGRAMS(ENGLISH)

1. Connection

2. Adjust the distance so that the output waveform ofFig. a and the Fig. b can be obtain.

When indicating parts by reference number, pleaseinclude the board name.

(For schematic diagrams) All capacitors are in F unless otherwise noted. pF :

F. 50 V or less are not indicated except for electrolyticsand tantalums.

Chip resistors are 1/10 W unless otherwise noted.k=1000 , M=1000 k.

Caution when replacing chip parts.New parts must be attached after removal of chip.Be careful not to heat the minus side of tantalumcapacitor, Because it is damaged by the heat.

Som

sony hdr cx11e 12 e servicemanuallevel2 v1.1 2008.11

Documents

image device

specification recording

file format

image resolution equivalent

mpeg2psstill image

imagesaudio compression

systemvideo compression

camera recording