The Source User Manual   iii  

1  The Source User Manual

The Source User Manual   2  

glass lid

upper seal

reservoir cup

collector

lower seal

base

threaded post

start/stop buttonvacuum relief screw

3  The Source User Manual

Make the tincture.

Supplies

reservoir cup

The Source User Manual   4  

reservoir cup

5  The Source User Manual

Turn the screw fully to the RIGHT to seal the chamber.

Mobile app START PROCESS button (When the process is running, the same button is for STOP PROCESS.)

comm icon

Press the green button on the base to start the Source or use the mobile app. One flash of the button lets you know it started.

1 flash = process is starting6 flashes = process is stopping

Plug in the Source.

The Source User Manual   6  

If the vacuum pump does not shut off within a few seconds, try pressing down on the lid to help it seal.

Vacuum level quickly reaches 100 if the collector is sealed.

7  The Source User Manual

Use the sliders to set the temperature and run time for the extraction.

The Source User Manual   8  

9  The Source User Manual

Here the SOURCE label is upside down

Glass lid

Narrow ring of the upper seal

The Source User Manual   10  

The last 4 digits will be the same as those on the serial number sticker near the Source power cord.

11  The Source User Manual

Temp, Vacuum Level, Time Left readouts

START/STOP PROCESS button

Drag to set Temperature

Drag to set Run Time

Menu

comm icon

The Source User Manual   12  

Temp, Vacuum Level, Time Left readouts

Drag to set Run Time

Menu

START/STOP PROCESS button

Drag to set Temperature

13  The Source User Manual

The Source User Manual   14  

15  The Source User Manual

The Source User Manual   16