sp6010 - star point terminal test function supports frequency range stipulated by...

SP6010 Communication Test Set

ADD : 3/F, Building A, Wangjing Science Technology Pioneer Park No.2, Li Ze Zhong Er Lu, Chaoyang District, Beijing, China

TEL : 010 6230 4490/91/92 FAX : 010 6236 0393 WEB SIT: www.starpointcomm.com E-MAIL : [email protected]

SSPP66001100 DDaattaa SShheeeett

Description

SP6010 is a Communication Test Set with the own IPR of Beijing StarPoint Technology Company Limited Co.,

Ltd. This test set can perform TD-SCDMA RF conformance test, HSDPA performance test, HSUPA performance

test and supporting function of audio test; support WCDMA RF test, GSM RF test, GPRS/EDGD RF test and

CMMB test. SP6010 also has calibration function in Non Signaling test mode.

SP6010 can be interconnected with other instruments to accomplish system integration test through its GPIB

remote control function and numerous and comprehensive peripheral interfaces.

SP6010 is applicable to extensive fields, such as chip maker, design house, terminal certificate, terminal

manufacture and maintenance of TD-SCDMA, HSDPA, HSUPA, WCDMA, GSM, GPRS/EDGE and CMMB.

Function

The functions of SP6010 show in below figure:

SP6010 can provide a complete test function such as TD-SCDMA, WCDMA, GSM, GPRS/EDGE, and CMMB.

Support the switch among TD-SCDMA, WCDMA,GSM, CMMB;

In connection state, support the switch between TD-SCDMA and GSM.

TD-SCDMA Test Function

SP6010 can function as TD-SCDMA system simulator, TD-SCDMA signal generator and TD-SCDMA terminal

signal analyzer. It supports TD-SCDMA RF conformance test, and the measurements cover the testing item set by

3GPP TS34.122.

TD-SCDMA RF Test

According to the 3GPP TS34.122, SP6010 complete covers the test items such as terminal transmitters, receivers,

performance requirement, HSDPA performance and HSUPA performance.




TD-SCDMA Terminal Calibration

Support TD-SCDMA terminal non-signal calibration:

AUTO FREQUENCY CALLIBATION

AUTO POWER CALLIBRATION

AUTO GAIN CALLIBRATION

TD-SCDMA Audio Test

Under AMR12.2k service mode, it supplies four audio

test function modes:

Loopback (Default options)

Decoder_Cal

Encoder_Cal

Handset Low

TD-SCDMA System Technical Index

Overall Parameters

Protocol standard 3GPP-TDD LCR Release4、Release5、Release7 (HSUPA)

Chip rate 1.28Mcps

Physical channel P-CCPCH、S-CCPCH、PICH、FPACH、DwPCH、DPCH、HS-DPSCH、HS-SCCH

Support modulation method QPSK、16QAM

DPCH data rate

DL/UL 12.2 kbps (Loopback Mode 1 TM)

DL/UL 64 kbps (Loopback Mode 1 AM)

DL144 kbps / UL 64 kbps (Loopback Mode 1 AM)

DL384 kbps / UL 64 kbps (Loopback Mode 1 AM)

Transmitter Index

TD-SCDMA signal output frequency range 1880 MHz ～ 2400 MHz

Frequency resolution 1 Hz

TD-SCDMA signal output power range -120 dBm ～ -25 dBm (RF IN / OUT port)

-120 dBm ～ -15 dBm (RF OUT port)

Output power resolution 0.1 dB

Output TD-SCDMA signal EVM < 1.5%

Receiver Index

TD-SCDMA signal maximum safe input

level +33 dBm

TD-SCDMA signal input frequency range 1880 MHz ～ 2400 MHz


TD-SCDMA signal input power range -65 dBm ～ +30 dBm

Input power resolution 0.1 dB

Power test tolerance < ±0.5 dB

Frequency stability test range ±1.5 kHz

Frequency stability test tolerance ±10 Hz

EVM test range < 24%

EVM test accuracy ±1%

Audio Function Index

Audio Output

Audio signal output method Single port output




Frequency flatness(take 1khz as basis) 200 Hz ～ 8 kHz ±0.2 dB

100 Hz ～ 200 Hz ±0.6 dB

Maximum output level +3 dBv (600 Ωload)

Output resistance 30 Ω

SNR 100 dB

THD+N < 0.02%

Audio Input

Audio signal input method Single port input

Frequency flatness

(take 1khz as basis)

200 Hz ～ 8 kHz ±0.2 dB

100 Hz ～ 200 Hz ±0.6 dB

Input level range -50 dBv ～ +1 dBv

Input resistance 10.8 kΩ

SNR 80 dB

THD+N < 0.02%

WCDMA Test Function

SP6010 can function as WCDMA system simulator, WCDMA signal generator and WCDMA terminal signal

analyzer. It supports WCDMA RF test, and the measurements cover terminal factory test requirements and the

testing item set by 3GPP TS34.121.

WCDMA RF Test

According to the 3GPP TS34.121, SP6010 complete covers the test items such as terminal transmitters, receivers,

performance requirement.

WCDMANon-signaling

Test

Wave

Quality

Inner Loop

Power

Control

Spectrum

Emission

Mask

Adjacent

Channel

Leakage

power Ratio

BER

PRACH ON/

OFF Power

Measurement

Dynamic

Power

Measurement

Frequency

Error

WCDMA Terminal Calibration

Support WCDMA terminal non-signal calibration:

FDD Burst Frequency Calibrate

FDD Fast Power Calibrate

FDD Dynamic Power Measurement

WCDMA System Technical Index

Overall Parameters

Protocol standard 3GPP- FDD Release4、Release5




Chip rate 3.84Mcps

Physical channel P-CCPCH、PICH、PRACH、SCH、DPCH、CPICH

Support modulation method HPSK/QPSK

DPCH data rate DL/UL 12.2 kbps

Transmitter Index

WCDMA signal output frequency range Band I、Band II、Band III、Band IV、Band V、Band VI、Band VII、Band VIII


WCDMA signal output power range -120 dBm ～ -19 dBm (RF IN / OUT port)

-120 dBm ～ -9dBm (RF OUT port)


Output WCDMA signal EVM < 2%

Receiver Index

WCDMA signal maximum safe input level +33 dBm

WCDMA signal input frequency range Band I、Band II、Band III、Band IV、Band V、Band VI、Band VII、Band VIII


WCDMA signal input power range -65 dBm ～ +30 dBm



Frequency stability test range ±1.5 kHz

Frequency stability test tolerance ±12 Hz

EVM test range < 34%

EVM test accuracy ±1%

GSM Test Function

SP6010GSM terminal test function supports frequency range stipulated by GSM900,DCS1800,PCS1900,GSM850

and so on ,and also supports handover between frequency range and frequency points.

GSM Terminal RF Test

According to the requirements of 3GPP TS 51.010 v7.10.0 of GSM, SP6010 can accomplish basic RF index test

of GSM terminal.

GSM terminal calibration function

Support GSM terminal non-signal calibration:

GSM frequency calibration(AFC)

GSM power calibration(APC)




GSM gain calibration(AGC)

GSM System Technical Index

Overall Parameters

Protocol standard 3GPP TS 51.010

Modulation method GMSK

Service type FS voice service

Transmitter Index

Supportive signal frequency range PGSM / EGSM / DCS1800 / PCS / RGSM / GSM850 / GSM480 / GSM750 /

TGSM810


GSM signal output power range -120 dBm ～ -25 dBm (RF IN / OUT port)



Receiver Index

GSM signal maximum safe input level +36 dBm


TGSM810


GSM signal input power range -60 dBm ～ +35 dBm



Frequency deviation test range ±1.5 kHz

Frequency deviation test tolerance ±10 Hz

GPRS/EDGE Test Function

SP6010 GPRS / EDGE terminal test function supports frequency range stipulated by GSM900, DCS1800,

PCS1900 and GSM850 and so on and also supports the handover between frequency range and frequency points.

GPRS / EDGE Terminal RF Test:

According to the requirements of 3GPP TS 51.010 v8.0.0, SP6010 can accomplish basic RF index test of GPRS /

EDGE terminal.

GPRS/EDGE Terminal Calibration Function

Support GPRS / EDGE terminal non-signal calibration




EDGE frequency calibration(AFC)

EDGE power calibration(APC)

GPRS/EDGE System Technical Index

Overall Parameters

Protocol standard 3GPP TS 51.010

Modulation method GMSK / 8PSK

Service type Mode A / Mode B / Mode SRB

Transmitter Index


TGSM810


Module signal output power range -120 dBm ～ -25 dBm (RF IN / OUT port)



Receiver Index

Modulation signal maximum safe input

level +36 dBm


TGSM810


Modulation signal input power range -60 dBm ～ +35 dBm



Frequency deviation test range ±1.5 kHz

Frequency deviation test tolerance ±10 Hz

CMMB Test Function

Main services of mobile multimedia broadcast terminal includes television broadcast, voice broadcast, electrical

service guide, emergency broadcast and data broadcast and so on According to standard part 1-7 of "Mobile

multimedia broadcast ",SP6010 supports CMMB terminal service test:

CMMB System Technical Index

Overall Parameters

Protocol standard mobile multimedia broadcast standard




Bandwidth 8MHz

Modulation method OFDM

Mapping method BPSK、QPSK和 16QAM

Encoding method Outer encoding: RS (240，176) 、 (240，192) 、 (240，224) 、 (240，240)

Inner encoding: LDPC 1/2、3/4

Circling prefix 51.2µs

System net load 2.046 ～ 16.243Mbps

Number of sub loading waving 4096

Outer interlacing Support mode 1.2 and 3

Scrambling method Support all modes

Transmitter Index

CMMB signal output frequency range 470MHz ～ 798MHz (U wave band)


CMMB signal output power range -110 dBm ～ -35 dBm


Non-signaling Basic test function

The SP6010 non-signaling Basic test function to provide a radio frequency list feature, and support of

TD-SCDMA, GSM and EDGE terminal FDT calibration feature (requires chip support).

TD-SCDMA terminal non-signaling Basic test function

Support TD-SCDMA terminal FDT calibration feature：

AUTO FREQUENCY CALLIBATION（AFC）

FAST POWER CALLIBATION（FPC）

Overall Parameters

Burst type DL：Default、CW、TotalCW

UL：Default、CW

Support modulation method QPSK

Support Time slot UL:TS1 ~ TS5，DL:TS2 ~ TS6

Transmitter Index

List Step parameter RF frequency, RF power, Line losses, Baseband relative power

signal output frequency range 460 MHz ～ 2500 MHz


signal output power range -120 dBm ～ -25 dBm （RF IN / OUT Port）

-120 dBm ～ -15 dBm （RF OUT Port）



Baseband dynamic range 0 ～ -25dB

Baseband Resolution 0.1 dB

Baseband error < ±0.5 dB

Step number <=100




Frequency switch time <800us

Power switch time <250us

Receiver Index

List Step parameter RF frequency, RF reference level, Line losses, Continuous frames



The maximum safe input level +27 dBm


Input power of the test error < ±0.5 dB

Step number <=100


Reference level switch time <250us

Test duration TD：<=1500 Sub-frame

GSM/EDGE terminal non-signaling Basic test function

Support GSM/EDGE terminal FDT calibration feature：


FAST POWER CALLIBATION（FPC）

Overall Parameters


UL：Default、CW

Support modulation method DL:GMSK ，UL:GMSK、8PSK

Support Time slot UL：TS0 ~ TS7，DL：TS1 ~ TS7

Transmitter Index











Step number <=100



Receiver Index










Step number <=100



Test duration <=2500 frame

WCDMA terminal non-signaling Basic test function

Support GSM/EDGE terminal FDT calibration feature：


WCDMA FAST POWER CALLIBATION（WFPC）

Overall Parameters


UL：Default、CW

Support modulation method QPSK、BPSK

Support Time slot UL：TS0 ~ TS12，DL：TS1 ~ TS12

Transmitter Index











Step number <=100



Receiver Index







Step number <=250



Test duration <=6000 frame




SP6010 basic technical index

Transmitter RF Index

CW output frequency range 460 MHz ～ 2500 MHz


CW output power range -120 dBm ～ -10 dBm (RF IN / OUT port)

-120 dBm ～ 0 dBm (RF OUT port)


CW output power tolerance < ±0.5 dB

CW output power repeatable < 0.05 dB

Transmitter phase noise Deviate 20 kHz <-115 dBc/Hz / deviate 10 MHz <-135 dBc/Hz

VSWR(voltage standing wave ratio) < 1.3 (when the output level is less than -3 dBm)

Output resistance 50 Ω

Output interface type N Female

Receiver RF Index

CW maximum safe input level +27 dBm

CW input frequency range 460 MHz ～ 2500 MHz


CW input power range -65 dBm ～ +27 dBm


Receiver noise floor < -130 dBm/Hz

CW input power test tolerance < ±0.5 dB

CW frequency deviation test range ±15 kHz

CW frequency test tolerance ±1 Hz

Input resistance 50 Ω

Input interface type N Female

Time base index

Temperature stability ≤ 0.01 ppm

maximum frequency deviation < 1 10-8 (0 ～ 40 ℃)

aging rate ≤ 0.1 ppm/year

Time Clock Reference Input

input frequency requirement 10 M±100 Hz

input voltage requirement 0 dBm ±10 dB sine/TTL

input resistance 50 Ω

input interface type BNC Female

Instrument Working Condition

instrument working temperature +5 ～ +40 ℃

instrument working humidity 20% ～ 80%

instrument storage temperature 0 ℃ ～ +70 ℃

instrument storage humidity 5% ～ 93%

preheat time for boot 30 minutes

Instruments Dimension




height 240 mm

width 550 mm

depth 600 mm

Core Value of the Product

Flexible Application

Hardware and software of SP6010 adopts module design and the abundant hardware preservation resources and

software selection will make the product more flexible and the customer investment more economical. Abundant

time clock and synchronous signal interface will expand the instrument use scope at the most. The customer can

choose various instruments to realize system integration test.

High Efficiency Test

PXI structure of SP6010 can accomplish various complex tests with high speed and show it out by figure interface.

High speed test improves test efficiency and save the investment of test.

Accurate Test Result

High accuracy RF font end with accuracy test algorithm and conformance test procedure and method will make

the result more credible.

Strong Remote Control Function

Adopt bus line transmission technology of GPIB and LAN and so on to control remotely. Configured the tester

parameter and motion so as to acquire the measurement result.

Product Quality Guarantee and After-Sale Service

StarPoint has the research and develop employees with abundant experience, advanced solutions within industry

and perfect training and upgrade service. We will create more added values with SP6010 by our heart.

Our company can supply technical training of instrument usage and instrument rent service. For the customer who

will buy our products, we will supply perfect after-sale services like commissioning, maintenance, upgrade and

calibration and so on. Meanwhile, to ensure customer to get the best using effect of instruments, our company will

supply various services such as test solutions consultant, product technical support and test application technical

consultant and so on according to customers' special requirements.

Product Order Information

About the detail information of SP6010 integrated tester,please log in our web site http://www.starpointcomm.com

or dial technical consultant cell 010－62304889.

http://www.starpointcomm.com/

sp6010 - star point terminal test function supports frequency range stipulated by...

Documents