Speakers

WELCOMEMONITOR SPEAKERS

A5

`53,600Built on the heritage of ADAM Studio Monitors, which are employed inmany of the most renowned recording and sound studios around theworld, the new compact A5 brings the same breakthrough ADAMloudspeaker technologies to multimedia applications such as desktoprecording, broadcasting, gaming, home theatre and surround applications.

The dynamic response and treble are highly impressive, with great transienthandling. Acoustic material sounds convincing, reverb spaces are audible,and stereo imaging is sharp. The bass and mids are good, too. When mixing,we attenuated the LF and HF EQ, as the A5s sounded a little bit scooped. Ittook us a while to hit upon a good mix - virtually every adjustment seemedto make a difference. The shape of the drums when tweaking compressionwas clearer, as was the reverb space. Our final test mix was solid and satisfying,with rocking, nicely squashed compression on the drums. It might take us alittle while to get used to the sound of the tweeter, but these speakers deserveto be heard, as theyre pretty special.

Amplifiers and controlsTwo built-in 25 Watt amplifiers power the drivers directly. The front of the A5 sports dual ports for surprising low frequency response down to 55Hz, metal grills for durability, as well as power and gain controls. The rear panel includes balanced (XLR) jacks, unbalanced (RCA) jacks, and a host of EQ controls to tailor the sound to suit room acoustics or personal taste.

StereolinkThe A5 employs a new development by ADAM called Stereolink. This new technology connects two A5 speakers in such a manner as to allow the user the option to control the overall stereo volume of the system from either speakers gain control. This makes the A5 a natural for "mixer-less" desktop applications where overall system volume needs to be adjusted often and from a single control.

WooferNumber1Basket 5.5" (145 mm)Cone materialCarbon sandwichTweeterNumber1TypeARTDiaphragm area4 inch (2420 mm)Equiv. Diaphragm 2" (56 mm)Velocity transform ratio4:1Diaphragm weight0.17 gSpecificationsBuilt-in AmplifiersWoofer1TypeA/BAmp. power RMS / music25 W / 40 WTweeter1TypeA/BAmp. power RMS / music25 W / 40 WControl panelInput Sensitivity- to +10 dBHigh Shelf EQ > 6 kHz6 dBLow Shelf EQ < 150 Hz6 dBTweeter gain4 dBInput connectorsAnalogXLR / RCAGeneral dataPanelRearFrequency response55 Hz - 35 kHzTHD > 80 Hz1.5 %Long term output101 dBMax. peak110 dBCrossover frequencies2200 HzInput impedance10 KOhmWeight11 lb (5 kg)Magnetically shieldedYesHeight x Width x Depth11" (285 mm) x 7" (172 mm) x 8" (200 mm)

MSP7

`24,900

The new top-of-the-line MSP7 STUDIO Powered Monitor Speaker iscapable of delivering consistent quality and performance that youcan rely on in modern production environments that handle anycombination of digital and analog sources as well as stereo andsurround formats.

MSP7 STUDIO, with a new"advanced magnetic structurethat achieves effective shielding whilemaintaining the integrity of the speaker'smagnetic circuit for significantly lowerdistortion as well as an improved definition.

Where wood cabinets have glued joints that interrupt the continuity of the enclosure, the thick walledMSP7 STUDIO cabinet is molded in one piece, resulting in smooth acoustic transfer throughout the entireenclosure for superior reproduction precision.

The MSP7 STUDIO features a balanced XLR-type connector for input. This provides direct compatibility withprofessional gear and allows the use of balanced lines for maximum audio quality even where long cable runsare required. Rear-panel controls include a continuous input sensitivity control, and trim switches that enableyou to adjust the bass and treble in four and three positions, respectively (+1.5 dB/0 dB/-1.5 dB/-3 dB at 50 Hzand +1.5 dB/0 dB/-1.5 dB at 10 kHz), so that the system's response to be quickly matched to the room. There'salso a low cut (FLAT, 80 Hz, 100 Hz) switch that is useful when the MSP7 STUDIO is used with the SW10 STUDIOsubwoofer. The AC power cord is removable for easy transportation and setup.

2-way bass-reflex bi-amplified near field studio monitor6.5" cone woofer and 1" titanium dome high-frequency unit delivers 45Hz- 40kHz frequency response 130 watts (LF 80W + HF 50W) dynamic bi-amplified power.XLR balanced input.31 positions Level Control facilitates precise overall system level matching.Low Cut switch and TRIM Control (High/Low).Full magnetic shielding.SPECS

LSR310s

`34,100

JBL Patented Slip Stream PortThis patented JBL port design works in concert with the LSR310S low frequency driverfor deep, dynamic bass response at all playback levels. The double-flared shape of theport is precisely calculated to optimize low-frequency extension.XLF Extended Low Frequency SettingThe XLF setting activates a specially-engineered tuning that emulates the ample bass tuningused in today's dance clubs. When producing a dance track, the XLF setting will inspire usand bring a bit of the club to your control from. For inspiration to the max, position theLSR310S in the nearest corner of the room and activate the XLF setting.Custom 10" Down-Firing High Excursion Low Frequency DriverThe custom-designed driver in the LSR310S exemplifies JBL engineering prowess, deliveringdeep low frequency response into the 20 Hz region, and 113 dB peak output, for long periodsat full rated power with no risk of failure.Professional Balanced Inputs and OutputsWith balanced XLR and 1/4" inputs and XLR outputs we can add the LSR310S to any studiomonitor system to extend its low frequency performance or use it as the ".1" LFE Channelin a surround sound system.Selectable Input SensitivityThe -10dBV/+4 dBu sensitivity switch ensures compatibility with a broad range of signalsources, allowing us to connect the LSR310S to high-output professional equipmentwithout any danger of input overload.Three Crossover SettingsThe 80 Hz setting is recommended for use with the LSR305, LSR308 or any studio monitors.The External setting allows use of an outboard crossover.Volume ControlFEATURESDriver250mm (10-inch) High-Excursion, Down-FiringLow Frequency Extension27 HzMax Peak SPL113 dBAmplifier Power200 W CLass DCrossover Settings80 Hz, XLF, ExternalInputs2 x XLR, 2 x TRS BalancedOutputs2 x XLRMaximum Peak Input Level+20.3 dBuAC Voltage100-240 VAC +/- 10% 50/60 HzDimensions (HxWxD)448 mm x 381 mm x 398 mm (17.65 in x 15 in x 15.65 in)Weight15.6 kg / 34.3 lbs.SPECIFICATIONS

RESOLVE SE8

`20,100

2-way active studio reference monitor with ported tuned enclosure (sold individually)100 watts of power8-inch woven carbon fibre woofer1.25-inch soft dome tweeter with neodymium magnet40Hz-27kHz frequency responseActive crossover with multi-pole design for linear response 4-position high frequency lift controlBalanced 1/4-inch inputs, unbalanced RCA inputsAV shielded for use with sensitive electronicsSolid MDF (Medium Density Fibreboard) construction

Features

SpecificationDetailPoweredYesPower ConfigurationBi-AmpedLF Driver Size8"LF Driver TypeConeLF Driver MaterialCarbon FiberHF Driver Size1.25"HF Driver TypeSoft domeHF Driver MaterialSilkLF Driver Power Amp75WHF Driver Power Amp25WFrequency Range40Hz-27kHzCrossover Frequency24 dB/octave @ 3.19kHzEnclosure TypePorted (front)Input Types1 x TRS, 1 x RCAHeight16.25"Width12"Depth11.2"

SC208

`73,300The SC208 features an 8 inch woofer and is ideal for professional music and post-production studios of any size. The output power (150w) and low frequency handling (down to 36Hz) make this a serious monitoring system without the need of a sub to hear that all important low end.

Description - 2-way SystemDimensions (WxHxD) [mm] - 255 x 390 x 330Dimensions (WxHxD) ["] - 10.04 x 15.35 x 12.99Free-field frequency range (-3dB) - 36Hz - 21kHzTweeter - AMT RS2Mid-Woofer - 200mm/8"Cross-over frequency - 2800HzMaximum SPL @ 1m - 112dBAmplifiers - 2Amplifiers (short-term outp. power) - 150WProtection limiterVolume - -inf. - +6dBHigh-shelve filter (-5dB - +3dB) - > 3kHzDesk filter (-5dB - +3dB) - 160HzLow-shelve filter (-5dB - +3dB) - < 300HzLevel-fix dip switchFilter-fix dip switchXLR in (impedance) - (10k)RCA in (impedance) - (10k)Standby - < 1WFull output - 170VAWeight kg/lb. - 10.9 / 24

FEATURESDescription2-way SystemDimensions (WxHxD) [mm]255 x 390 x 330Dimensions (WxHxD) ["]10.04 x 15.35 x 12.99Free-field frequency range (-3dB)36Hz - 21kHzTweeterAMT RS2Mid-Woofer200mm/8"Cross-over frequency2800HzMaximum SPL @ 1m112dBNumber of amplifiers2Total short-term output power200WOutput power (woofer)150WOutput power (tweeter)50WProtection limiterSettingsVolume-inf. - +6dBHigh-shelf filter (-5dB - +3dB)> 3kHzDesk filter boost (0dB - +3dB)80HzDesk filter cut (-5dB - 0dB)160HzLow-shelf filter (-5dB - +3dB)< 300HzLevel-lock dip switchFilter-lock dip switchConnectorsXLR in (impedance)(10k)RCA in (impedance)(10k)Power consumptionStandby< 1WFull output170VAMisc.Weight kg/lb.10.9 / 24

M1 ACTIVE 620

`24,900

6.5" low frequency woofer for clear bass and midrange1" silk dome tweeter for smooth, detailed highs without harshnessBi-amplified design / tweeter 30W, woofer 65W for ultra accurate frequency separationHigh-precision drivers offer lower distortion and smoother frequency responseAcoustical waveguide for superior imaging with minimal diffraction1" thick front baffle virtually eliminates speaker resonanceMagnetically shielded for close placement to video monitors in computer-based music production studiosXLR and 1/4" TRS input connectors with volume controlLow frequency density switch for acoustic space adjustment of the monitorsRear port design provides deep bass extension and increased SPLHi, mid and low frequency EQ switches to accommodate user preference and sub-woofersTop mounted, integrated power switch/clip light barFEATURESBi-amplified Design / Tweeter 30W, woofer 65WWoofer. 6 1/4 lightweight, magnetically-shielded, ultra-stiff polypropylene cone with rubber surround and high power handling voice coil.Tweeter. 1 silk dome with magnetic shieldingFrequency Response. 49 Hz 20 kHzCrossover Frequency. 2.8 kHz.Signal-to-Noise Ratio. >100 dB below full output, unweighted.Inputs. XLR and 1/4 supportingboth balanced and unbalanced cabling.Polarity. Positive signal on + pin creates forward cone displacement.Input Impedance. 20k ohms balanced or 10k ohms unbalanced.Input Sensitivity. 85 mV noise (pink) produces 90 dB(A) output SPL at 1 meter. Gain knob turned fully clockwise (maximum).Dimensions (W x H x D). 8.5 x 15.0 x 10.25 / 21.6 cm x 38.0 cm x 26.0cm.Net Weight (each speaker). 21 lbs / 9.6 kg.SPECS

HS80M`42,530

2-way bass-reflex bi-amplified near-field studio monitor8" cone woofer and 1" dome high-frequency unit42Hz - 20kHz frequency response.120 watts dynamic bi-amplified power.XLR and TRS phone jack inputs accept balanced or unbalanced signals.Level control facilitates precise overall system level matching.MID EQ, ROOM CONTROL, and HIGH TRIM response control switches.LOW CUT switch.Full magnetic shielding.FEATURESSpeaker typeBiamp, 2-way powered speakerFrequency range (-10dB)42Hz-20kHzComponentsLFLF: 8" coneHFHF: 1" DomeCrossover2kHzOutput power120W (LF: 75W, HF: 45W)I/O connectorsXLR-3-31 type, PhoneProcessorsLow cut (Flat/80/100Hz; 12dB/oct), EQ (High: +/-2dB; Mid: 2kHz, +/-2dB; Room control: 500Hz, 0/-2/-4dB)Power consumption60WMagnetic shieldingYesDimensionsW250mm; 9-7/8inH390mm; 15-3/8inD332mm; 13-1/8inNet weight11.3kg24.91lbsAccessoriesOwners manual, AC power cordSPECSTHANK YOUSidhardh Ramesh32