SPECIALIZING IN Offshore & Land-Based Oil & Gas Applications

Intrinsically Safe / Flameprooffor Zone 0, 1 & 2 Hazardous Areas

Contact any of our worldwide locations for more information

SALES@LOADSYSTEMS.COMUSA | Canada | UK | Dubai | AU

WWW.LSIROBWAY.COM | WWW.LOADSYSTEMS.COM9633 Zaka Road | Houston, TX 77064

Toll Free Tel: +1.888.819.4355Tel: +1.281.664.1330Fax: +1.281.664.1390

MARKET TESTED & MARKET PROVENCable-Based & Wireless Load Monitoring Solutionsfor the Crane & Lifting Industry Oil & Gas Drilling/Production

platforms are harsh and demanding environments, both on land and offshore. Platform safety often requires the crane/lifting apparatus to be equipped

with a Zone 0, 1 or 2 Crane Load Monitoring System.

LSI-Robway is a market leading manufacturer of cable-based and wireless systems that are designed to meet

global hazardous environment regulations and will handle the

demanding safety requirements of the most rugged environments.

WE OFFER OPTIONS FOR THE FOLLOWING ZONE CLASSIFICATIONS:

• Boom Sensors (Load, Angle, A2B, Wind Speed & More) Certified for ATEX Zone 0, 1, 2; CSA Class 1 Div 1 and IECEx Zone 1

• NEW GS820-10 & 11 Wireless Display Certified for ATEX Zone 1

• 4100IS Cable-based Display Certified for ATEX Zone 1 & IECEx Zone 1

• GS550 Wireless Display Certified for CSA Class 1 Div II, ATEX Zone 2

• GS820 Wireless Display Certified for CSA Class 1 Div II

• Designed for hazardous area applications, complies with IECEx Class 1, Zone 1 and ATEX Class 1, Zone 1 standards

• LSI-Robway is quality endorsed to ISO 9001:2000 with many international certifications

• Simplified calibration & fault-finding techniques have been developed by LSI-Robway to minimize down-time

• Multiple restricted zones can be set

• Tare facility included in the standard system

• The RCI-4100IS can be supplied with historical data logging of crane usage and/or overload history, which can be used for predictive maintenance

• Operator-selectable sea-states/duties

• The RCI-4100IS can be supplied with restricted slew zone to warn the operator of impending collisions with jack-up legs or other obstacles on offshore drilling rigs, restrict travel of loads over hazardous areas

• Optional Automatic Gross Over-moment Protection (AGOP) or manual Gross Over-moment Protection (GOP) system can be integrated into the RCI-4100IS to suit application

• Multiple relay outputs for activating AGOP/GOP device external alarms, also for inhibiting hoist, luff, and slew motions

• Analogue outputs for specialized applications

• PWM (Pulse width modulated) output facility to speed controller

THE RCI-4100IS Zone 1 SYSTEMAn ideal product loaded withfeatures to suit your application

THE WIRELESS GS820-CSA DISPLAYCSA Class 1 Div 2 CertificationBoom sensors that communicate with the GS820-CSA can be supplied with Zone 0, 1 and 2 certification if needed

• All stainless steel enclosure AISI-304

• Weather resistant

• Transflective 320 x 240 graphical display with white led backlight. The LCD is FSTN technology with 6” viewing area.

• 32,000 events datalogger

• USB port for datalogger download or firmware / load charts update

• Four internal mosfet solid-state relays, 1 amp each

• Units: metric and U.S. (kg, lbs, metric tons, long tons, short tons)

• Compatible with standard two-way LSI GS radio network

• CSA Class 1 division 2 certified

• Monitor up to 32 wireless sensors which can include Load, Angle, A2B, Wind Speed, Slew Sensor, Load Charts

• LSI-Robway boom sensors can be supplied with optional CSA Class 1 Div 1 or ATEX Zone 0 certification

• Work Area Definition Software is included as standard, this allows users to setup a 3D area for restricting slew, boom radius and tip height

Introducing the WORLD’S FIRSTSELF-CONTAINED WIRELESS ATEX ZONE 1 CERTIFIED

Load Monitoring Display

THE GS820-10 (FCC/IC) & GS820-11 (CE)

• Weather resistant• All stainless steel enclosure AISI-304• Buzzer output, displays visual alerts• Transflective 320 x 240 graphical display with white

LED backlight• II 2 G Ex d IIB T4 marked flameproof type of protection —

Class 1, Zone 1 certified• The LCD is FSTN technology with 6” viewing area• Four internal mosfet solid-state relays, 1.2 amp each• Units: metric and U.S. (kg, lbs, metric tons, long tons,

short tons) • Monitor up to 32 wireless sensors which can include: Load,

Angle, A2B, Wind Speed, Slew Sensor, Load Charts• The processor is contained within the display — No external

enclosure required• Work Area Definition Software is included as standard —

Allows users to setup a 3D area for restricting slew, boom radius and tip height

THE WIRELESS GS550-CSA DISPLAYCSA Class 1 Div 2 Certification

ATEX Zone 2 CertificationBoom sensors that communicate with the GS550-CSA can be

supplied with Zone 0, 1 and 2 certification if needed

• All stainless steel enclosure AISI-304

• Weather resistant

• 16,000 events datalogger

• USB port for datalogger download or firmware / load charts update

• CSA Class 1 Division 2 certified or ATEX Zone 2

• Three internal mosfet solid-state relays, 1 amp each

• Units: metric and U.S. (kg, lbs, metric tons, long tons, short tons)

• 2 x 20 characters text display with backlight

• Compatible with standard two-way LSI GS radio network

• LSI-Robway boom sensors can be supplied with optional CSA Class 1 Div 1 or ATEX Zone 0 certification

• Work Area Definition Software is included as standard, allowing users to setup a 3D area for restricting slew, boom radius and tip height

• Receives all LSI standard radio communications

• Configurable to be the master of up to 32 sensors (which allows for two way communication) or to listen to unlimited number of devices (one way communication)

• Industrial tested (-40°C to 85°C) temperature ratings

• Humidity 0 to 100% RH

• Input power supply: 9 to 30V, or USB port, or other depending on model number, current requirement of 200mA maximum

• Output options for data include: CAN bus, J1939 networks, RS232 or USB

• IP65 water resistant aluminum enclosure

• Potted electronics for increased waterproof protection

THE WIRELESS GATEWAY ROUTERCSA Class 1 Div 2 CertificationWell suited for applications where the user has a need to move sensor data directly into a PLC or into a remote host

LSI-Robway offers users a diverse range of load monitoring sensors with the option

of Zone 0, 1 and 2 Certification

Options can include Cable-Based and Wireless Sensors:

LOAD CELLS

LINE RIDERS (DYNAMOMETERS) with optional rope payout speed and direction monitoring

LOAD PINS

COMPRESSION LOAD CELLS

Wireless Load Cells Cable-Based Load Cell

Wireless Line Rider (Dynamometer)

Cable-Based Line Rider (Dynamometer)

Cable-Based or Wireless Load Pin

LSI-Robway offers both cable-based and wireless slew sensors, with optional ATEX Zone 0, CSA Class 1 Div 1 and IECEx

Zone 1 certifications.

LSI-Robway displays feature Work Area Definition Software, allowing users to

define 3D work areas for radius and tip height.

LSI-Robway offers users both Cable-Based & Wireless Anti-Two-Block Switches

The GS075-B Wireless A2B Switch is available with either CSA Class 1 Div 1 or ATEX Zone 0, 1 and 2 certifications

Additional Zone 0 Certified Sensors can include:

BOOM ANGLE SENSORSWIND SPEED SENSORSSLEW SENSORSRELAY JUNCTION BOX

GS075-B Wireless A2B Switch

LS055 Stainless Steel Mechanical A2B Switch

SWIBBOS Mechanical A2B Switch

LS051 Mechanical A2B Switch

LSI-Robway offers Zone 0, 1 and 2 rated cable-based and wireless

angle sensors / inclinometers.

The GS020 Wireless Wind Sensor is available with either CSA Class 1 Div 1 or

ATEX Zone 0, 1 and 2 certification.

The LS089-A Relay Junction Box is inserted in line between the power source

and the display to provide up to 8A of current on each output to drive solenoid

valves or external lights. It features a CSA Class 1 Div II certification.

LSI-Robway has developed a strong global expertise in the supply and support of hazardous area systems. LSI-Robway systems are operating effectively in the Gulf of Mexico, the North Sea, the Middle East, Nigeria, Brazil, Mexico, India, China, Singapore, Malaysia and Indonesia. We also support land based oil rigs throughout the world.

LSI-Robway provides 24/7 technical support. The oil business runs around the clock and users expect immediate support. LSI-Robway is well positioned to offer this support with offices in Houston, TX; Quebec, Canada; Aberdeen, Scotland; Dubai, UAE and Adelaide, South Australia. Each location has experienced offshore technicians capable of remote and on-site product support / troubleshooting.

With a diverse global geographic footprint, LSI-Robway has a large base of inventory available at each of our corporate office locations. This ensures minimal downtime for mission critical applications.

With thousands of systems operating in the field globally, you can be assured that LSI-Robway Products offer you the highest level of reliability and access to the latest technological designs. There are 20 engineers in the LSI-Robway R&D department who perform mechanical, electrical, software and wireless engineering on a daily basis. Technology developed in-house allows for complete control over how LSI-Robway products will function in your demanding environments.

TECHNICAL SUPPORT

INVENTORY

MARKET-PROVEN TECHNOLOGY

Both the LS051 and the LS055 are available with or without a wireless transmitter