specification sheet lumencove 2 -...
TRANSCRIPT
N.Kassabian - Rev.9
1/6
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumencove® 2.0DYNAMIC WHITE
FEATURES AND BENEFITS
Physical :• Low copper content extruded aluminum housing • Available in 1’, 2’, 3’, 4’ or 8’ sections• Electro-statically applied polyester powder coat finish• Tool-less LED frame adjustable mechanism, +/- 90° tilt angle• Low profile design• White standard finish• Extruded polycarbonate lens, clear or frosted• Indoor applications, dry location only
Performance :• Dynamic Warm variable color temperature: 2200K, 2700K, 3000K• Dynamic White variable color temperature: 2700K, 4000K, 6500K• Available in Regular Output (21 LEDs/ft) or High Output (42LEDs/ft) versions• Lumen maintenance 80,000 hrs [L70 @ 25°C]• Lumen maintenance 60,000 hrs [L70 @ 50°C]• Resolution per foot or per fixture (configured with LumenID V3 software & DMX/RDM)• Lumen measurements comply with LM - 79 - 08 standard• Operating temperatures: -25° C to 50° C [-13F to 122F]
Electrical :• Line voltage luminaire for 100 to 277V• Power and data in 1 cable (#16-5), white cable and connector standard• Thumb latch connectors, breakable under load• 5W/ft - RO version, 12W/ft - HO version• Dimming options: dim to warm via 0-10V (DWW only), DMX/RDM enabled dim to warm via single channel (DWW only) or DMX/RDM enabled 3-channel color temperature control
2 14 "
[56mm]
4 ", 24 ", 94121
", 35 43
", 47 21
"169
[311mm, 610mm, 908mm, 1207mm, 2402mm]
4 ", 19 ", 8971
16", 301
43
", 42169
"169
[185mm, 484mm, 782mm, 1080mm, 2276mm]
FRONT VIEW
SIDE VIEW
TOP VIEW
8"2
[73mm]
7
3 14 "
[83mm]
"41
[6mm]Minimumend to end spacing
90° 90°
Maximum Pivot Limits
Client Project name
Order# Type Qty
CERTIFICADO No.05884,05885
RETILAP
DeliveredOutput [lm]
DWW
DWH
4ft, HOclear lens
DMX/RDM3-channel control
2,622
2,857
Power[W]
48
48
CCT*[K]
2,600
4,000
DWW
Dim to Warm via DMX/RDMSingle channel control (DMX/RDM1)
1,872 41 2,700
DWW
Dim to Warm via 0-10V(DIM/DTW)
1,904 41 2,700
*Tested at full output.
N.Kassabian - Rev.9
2/6
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumencove® 2.0DYNAMIC WHITE
MOUNTING DETAILS
110°beam angle
2"[51mm]
5
Min. 3 18
[80mm]
"
34 "
[148mm]
N.B. Minimum cove heightdepends on sight line
SUGGESTED COVE DIMENSIONS
TOP VIEW
MAXIMUM ANGLE ADJUSTMENTA jumper cable is required for angles greater than 45°.
TOP VIEW
45˚
N.Kassabian - Rev.9
3/6
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumencove® 2.0DYNAMIC WHITE
ACCESSORIESOrder separately
Leader Cable :LCS2LC Leader Cable for Lumencove® 2.0, 10’ or 25’ [3m or 7.6m] standard lengths
Jumper Cable :LCS2JC Jumper Cable for Lumencove® 2.0, 2’ or 4’ [0.6m, 1.2m] standard lengths
Control Systems:LTO2 Lumentouch is a wall mount DMX 512 controller keypad.
LCU Lumencue is a USB / mini SD DMX 512 controller.
LID LumenID is a diagnostic and addressing DMX 512 controller.It must be specifi ed on all DMX applications.Refer to LID specifi cation sheet for details.
LTN Lumentone is a simple pre-programmed DMX 512 controllerwith a push button rotary dial and live feedback.
Control Boxes:CBX DMX/RDM control box.
Up to six power and data outputs to fi xtures or fi xture runs.Ethernet enabled option.Refer to CBX specifi cation sheet for details.
N.Kassabian - Rev.9
4/6
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumencove® 2.0DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS
Dimming Version (DIM/DTW* - Dim to Warm via 0-10V)*Available for DWW version only, 2700K to 2200K
Maximum run length, 8A maximum - Lumencove®2.0 RO 5W/ft
Cable length/Voltage 120V 240V 277V
175ft 350ft 350ft
164ft 316ft 350ft
10ft leader cable
50ft leader cable
Maximum run length, 8A maximum - Lumencove®2.0 HO 12W/ft
75ft 153ft 176ft
71ft 147ft 171ft
10ft leader cable
50ft leader cable
Leader cable#16-5
Jumper cable#16-5
Ground greenNeutral white
Line black
Data-- orangeData+ red
Junction box(by others)
Fromdimmer
100-277V To fixtures
Dimmer
0-10V
JBOX
Notes: 1 Maximum run length calculations are typically based on 4ft fixtures.2 Consult factory for specific applications.
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
N.Kassabian - Rev.9
5/6
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumencove® 2.0DYNAMIC WHITE
TYPICAL WIRING DIAGRAMS - continued
Maximum run length, 8A maximum - Lumencove® RO 5W/ft
Cable length/Voltage 120V 240V 277V
128ft 128ft 128ft
128ft 128ft 128ft
10ft leader cable
50ft leader cable
Maximum run length, 8A maximum - Lumencove® HO 12W/ft
75ft 128ft 128ft
71ft 128ft 128ft
10ft leader cable
50ft leader cable
Notes: 1 Maximum run length calculations are typically based on 4ft fixtures and up to 32 DMX/RDM enabled fixtures per DMX/RDM run.2 Consult factory for specific applications.3 DMX/RDM1 control option requires 1 DMX address. DMX/RDM control option requires 3 DMX addresses.
Leader cable #16-5
Leader cable #16-5
Leader cable #16-5100-277V
Datainput
100-277V
CBX-DS
CBX-DS
100-240V
Datainput
100-277VData input
CBX-ST
100-240V
Datainput
Lumentouch 2.0
Lumentouch 2.0
Jumper cable#16-5
Jumper cable#16-5
Jumper cable#16-5
Daisy Chain Layout (DMX/RDM1*, DMX/RDM)*Available for DWW version only, 2700K to 2200K
Make sure that the addition of all cable lengths and fixture lengths foreach run do not exceed the recommended limit.
Star Layout (DMX/RDM1*, DMX/RDM)*Available for DWW version only, 2700K to 2200K
AmericanColor Code
CEColor Code
Black Brown
Red/Purple BlackOrange Grey
White Blue
USE
Live 100-277V
0-10V / Data +
Green Yellow/Green Ground
0-10V / Data -
Neutral
N.Kassabian - Rev.9
6/6
08/JN/2016
5-year limited warranty.
Consult www.lumenpulse.com for our complete Standard Terms and Conditions of Sales.
© Copyright Lumenpulse 2016
1751 Richardson, Suite 1505 Montreal (Quebec) Canada H3K 1G6
1.877.937.3003 P.514.937.3003F. [email protected]
Lumenpulse reserves the right to make changes to this product at any time without prior notice and such modi�cation shall be effective immediately.
Specification Sheet lumencove® 2.0DYNAMIC WHITE
LCS21 2 3 4 5 6 7
HOW TO ORDER
1
Housing:LCS2 RO - Lumencove® 2.0, Regular Output 5W/ftLCS2 HO - Lumencove® 2.0, High Output 12W/ft
2
Voltage:100 - 100 volts120 - 120 volts208 - 208 volts
220 - 220 volts240 - 240 volts277 - 277 volts
3
Length (nominal):
12 - 12 1/4 inches (311mm) (0.57 kg/1.25 lbs)24 - 24 inches (610mm) (1.14 kg/2.5 lbs)36 - 35 3/4 inches (908mm) (1.71 kg/3.75 lbs)48 - 47 1/2 inches (1207mm) (2.28 kg/5 lbs)96 - 94 9/16 inches (2402mm) (4.56 kg/10 lbs)
4
Colors and Color temperatures: DWW - Dynamic warm white color temperatureranging from 2200K to 3000K. DWH - Dynamic white color temperatureranging from 2700K to 6500K.
5
Lens: CL - Clear lensFR - Frosted lens
6
Finish:WH - Smooth whiteCC - Custom color and finish (please specify RAL color)1
7
Control: DIM/DTW - Dim to Warm via 0-10V, 2700K to 2200K2, 3
DMX/RDM1 - Dim to Warm via single-channel DMX/RDM,2700K to 2200K2, 4
DMX/RDM - 3-channel color temperature control viaDMX/RDM5
Notes:1 North American RAL colors specified with RAL number only are provided with a smooth/high-gloss finish. Please consult factory for other RAL textures and glosses, or to match alternate colorcharts. Final color matching results may vary. 2 For more information about Lumenpulse’s Dim to Warm technology consult the application note and the brochure on the Lumenpulse website.3 10% minimum dimming value. Available for DWW version only. 4 1% minimum dimming value. Available for DWW version only. 1 DMX address per fixture. 5 Fixtures set to by fixtureresolution. 3 DMX addresses per fixture.