specifications book - kraftmaid one | kitchen and ... cabinetry 25 year limited warranty. masco...
TRANSCRIPT
SPECIFICATIONS BOOK
Fall 2014
KraftMaidONE™ Cabinetry 25 Year Limited Warranty.
Masco Cabinetry LLC warrants to the original consumer purchaser that our KraftMaidONE™ cabinetry will be free from defects in material and workmanship under normal use for a period of TWENTY-FIVE (25) YEARS from date of purchase. This warranty is not transferable. No changes or modifications can be made to this warranty except by an officer of Masco Cabinetry LLC.
Masco Cabinetry LLC may elect to repair or replace any defective KraftMaidONE product covered by our warranty.
THIS WARRANTY DOES NOT COVER:
• The natural aging or darkening of wood color, or the inherent growth characteristics of, or variation, in wood. • Defects caused by misuse, abuse, negligence, alterations, environmental conditions, improper installation, storage or
handling.
As with other natural materials, wood is affected by environmental factors such as natural and artificial lighting. Darkening or mellowing of the wood can be expected and is a natural process of wood as it ages. Each wood species also exhibits its own distinctive patterns and characteristics that add to its natural beauty. These variations in color and characteristics are not considered imperfections or defects.
Masco Cabinetry LLC further provides a Limited Lifetime Warranty on the door hinges and drawer guides to the original consumer purchaser for as long as you own the product. This Limited Lifetime Warranty provides that the door hinges and drawer glides will be free from defects in material and workmanship under normal use. Replacement hinges and drawer glides are subject to their availability from our suppliers.
From time to time, we will change design, specifications and materials as conditions require and improvements are developed, but we have no obligation to incorporate such changes in products we previously manufactured.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THIS WARRANTY DOES NOT COVER INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF USE, OR LABOR EXPENSES IN UNINSTALLING OR INSTALLING ANY MATERIAL OR PARTS, WHETHER ARISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT, NEGLIGENCE, TORT, OR ANY OTHER LEGAL THEORY, EVEN IF MASCO CABINETRY LLC HAS BEEN ADVISED OF THE POSSIBILITY THEREOF. MASCO CABINETRY LLC DISCLAIMS RESPONSIBILITY FOR DAMAGES IN EXCESS OF YOUR PURCHASE PRICE. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
This warranty is only valid in the United States of America. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
To obtain performance under this warranty, you must contact your KraftMaidONE supplier and report, in writing, all defects claimed and provide your original sales receipt or other documentation acceptable to Masco Cabinetry LLC. If you have difficulty obtaining assistance, write to: Masco Cabinetry LLC, Warranty Department, P.O. Box 1055, Middlefield, Ohio 44062
Table of Contents
Index 1-4
Door Styles A1-A8 Cherry Door Styles A1-A3 Maple Door Styles A4-A6 Oak Door Styles A7-A8
Finishes B1-B4
Construction Specifications and Options C1-C14 Cabinet Specifications C1-C6 Construction Options C7-C14
Wall Cabinets D1-D26 Wall Cabinets D1-D5 Peninsula Wall Cabinets D6-D7 Wall Corner Cabinets D8-D11 Peninsula Wall Corner Cabinets D12 Wall End Run Cabinets D13 Wall Open Cabinets D14-D15 Wall Microwave Cabinets D16-D17 Wall Hoods D18-D19 Wall Specialty Cabinets D20-D21 Wall Accessories D22-D26
Base Cabinets E1-E34 Base Cabinets E1-E15 Base Appliance Cabinets E16-E17 Base Corner Cabinets E18-E22 Base End Run Cabinets E23 Base Specialty Cabinets E24-E25 Base Accessories E26-E34
Tall Cabinets F1-F6 Tall Cabinets F1-F2 Tall Appliance Cabinets F3-F4 Tall Accessories F4-F6
Vanity Cabinets G1-G12 Vanity Cabinets G1-G9 Vanity Accessories G10-G12
Office Cabinets H1-H4 Office Cabinets H1-H2 Office Accessories H3-H4
Furniture Accessories I1-I4
Panels-Shelving-Trays J1-J8Paneling J1-J2 Shelving J3 Roll-out Trays J4-J8
Decorative Enhancements K1-K22 Supports and Valances K1 Moldings K2-K9 Molding Accents K10-K13 Decorative Hardware K14-K22
Replacement Parts L1-L20 Hardware L1 Touch-Up L2-L6 Replacement Parts L7-L20
Universal Cabinets M1-M8
Nomenclature Index N1-N2
Table of Contents
Table of Contents
Not
es
Notes
Notes
Index
Index
Item Page
11 Full-Width Tray C12
1 Roll-out Tray C11
1 Shelf Lazy Susan Kit D22
22 Deep Full Width Roll-out Trays C13
2 Deep Roll-out Trays C12
2 Full-Width Trays C12
2 Roll-out Trays C11
33 Roll-out Trays C11
3 Shelf Lazy Susan Kit D23
31 1/2” Vanity Frame Dimensions C4
34 1/2” Vanity Frame Dimensions C5
44 Deep Roll-out Trays C13
4 Roll-out Trays C11
66 Deep Roll-out Trays C13
6 Roll-out Trays C12
aAdjustable Door Buffer Kit L1
Aerosol Can L2
All Plywood Construction – APC C8
Ambridge Cherry A1
Ambridge Maple A4
Angle Crown Molding K2
Angled Outside Corner Molding K3
Antique Iron Knob K15
Antique Pewter Braided Knob K16
Antique Pewter Braided Pull K19
Antique Pewter Flower Knob K16
BBase Blind Corner E19
Base Blind Corner Cabinet Information E18
Base Blind Corner Lazy Susan Kit E26
Base Box E32
Base Column E33
Base Combination Drawer (4) E8
Base Combination Drawer (4) w/Two Deep Full-Width Trays E9
Base Combination Drawer (4) w/Two Full-Width Trays E9
Base Corner Angle E23
Base Corner Fixed Shelf E22
Base Double Door E1
Base Double Door w/Four Deep Trays E4
Base Double Door w/Four Trays E3
Base Double Door w/Two Deep Full-Width Trays E3
Base Double Door w/Two Deep
Full-Width Trays – Full Extension E3
Base Double Door w/Two Full-Width Trays E2
Base Double Door w/Two Full-Width Trays – Full Extension E3
Base End Angle E23
Base End Corner E23
Base End Panel w/Stile E33
Base Filler E32
Base Filler Overlay E32
Base Filler Pull-Out E24
Base Fluted Column E33
Base Fluted Filler E32
Base Four Drawer E10
Base Full-Height Double Door E5
Base Full-Height Double Door 12” Deep E5
Base Full-Height Double Door w/Four Deep Trays E7
Base Full-Height Double Door w/Four Trays E6
Base Full-Height Double Door w/Two Deep Full-Width Trays E6
Base Full-Height Double Door w/Two Full-Width Trays E6
Base Full-Height Single Door E4
Base Full-Height Single Door 12” Deep E5
Base Full-Height Single Door w/Two Deep Full-Width Trays E6
Base Full-Height Single Door w/Two Full-Width Trays E5
Base Microwave Cabinet 34” H w/Deep Bottom Drawer E17
Base Oven Cabinet Universal E16
Base Pantry Pull-Out E24
Base Pots and Pans Storage Two Drawer E9
Base Single Door E1
Base Single Door w/Two Deep Full-Width Trays E2
Base Single Door w/Two Full-Width Trays E2
Base Three Door E2
Base Three Door w/Six Deep Trays E4
Base Three Door w/Six Trays E4
Base Three Drawer E9
Base Top Mount Wastebasket – Double E25
Base Top Mount Wastebasket – Single E24
Base Wastebasket Floor Mount Kit E26
Base Wastebasket ROT Floor Mount Kit E26
Beaded Paneling J2
Bellwether Cherry A1
Bellwether Maple A4
Bistro Glass C10
Black Ceramic Insert Pull K20
Black Ceramic Insert Round Knob K17
Black Nickel Knob K15
Black Nickel Traditional Pull K22
Bright Brass Traditional Pull K22
Bright Chrome Knob K15
Brushed Satin Nickel Knob K16
Brushed Satin Pewter French Tassel Pull K20
Brushed Satin Pewter French Tassel Round Knob K17
CCabinet Care Kit L2
Cabinet Front Only C9
Cabinet Specifications C2
Chair Rail K4
Chesterhill Cherry A1
Chesterhill Maple A5
Chrome Traditional Pull K21
Classic Crown Molding K2
Contemporary Base Board K7
Contemporary Crown Molding K2
Copper-Pewter Knob K16
CoreGuard® Panel Backer J2
CoreGuard® Sink Base E10
CoreGuard® Sink Base w/Utensil Tray E11
Countertop Support K1
Countertop Wood Edge K4
Crown Molding K2
Cutlery Divider E30
DDeep Roll-out Trays – Full Extension Field Installation J5
Deep Roll-out Trays Field Installation J5
Deep Sink Base E13
Deluxe Recessed Panel Drawer Front C9
Dentil Molding K8
Depth Modification C9
Desk Door Cabinet – Single H1
Desk Drawer Cabinet H1
Desk End Panel H3
Desk File Drawer Cabinet H2
Desk Knee Drawer Cabinet H2
Desk Knee Drawer Cabinet – Trimmable H2
Dishwasher Panel E17
Dishwasher Raised Panel E17
Door Mount Towel Bar E28
Door Pantry Rack F4
Door Spice Rack D24
Door Storage D21
Drawer Organizer Kit E29
Drawer Partition E28
Drop-In Range Panel E16
Dusty Copper Flower Knob K16
Item Page Item Page
1
Item Page
Inde
x
Index
Item Page Item Page
2
eEdge Banding L5
Estero Corbel K10
Estero Foot K10
Estero Leg K10
FFill Stick L4
Filler Extension D25
Finish Terminology B1
Flaxton Cherry A2
Flaxton Maple A5
Fluted Filler Extension D25
Foil Box Rack E27
Fox Pointe Cherry A2
Fox Pointe Maple A5
Full Overlay – Concealed Hinges C1
Furniture Component Design Idea I1
Furniture End Panel – Center Drilled I2
Furniture End Panels I1
Furniture Shelves I2
Furniture Shelves – Heavy-Duty I2
Furniture Shelves – Top and Bottom I3
Furniture Toeboard Valance I3
gGalley Rail K8
Glenmoor Cherry A2
Glenmoor Maple A5
Glenmoor Oak A7
HHardware Template Kit L1
IInset Light Rail K4
Inside Corner Molding K3
LLarge Starter Molding K3
Lattice Wall D15
Lazy Susan E21
Lazy Susan Angle E22
Library Molding K5
mMatching Base End Panel E34
Matching Desk End Panel H4
Matching Interior C8
Matching Tall End Panel F6
Matching Vanity End Panel G11
Matching Wall End Panel D26
Mirror Cabinet G9
Mirror Molding K5
Modern Satin Nickel Knob K17
NNarrow Batten Molding K4
OOchre Finished Ceramic Totem Knob K18
Ochre Finished Ceramic Totem Pull K21
Office Frame Dimensions C6
Oil Rubbed Bronze Cup Pull K21
Oil Rubbed Bronze Round Knob K18
Open Cube Organizer D23
Organizer H3
Outside Corner Molding K4
Oven Cabinet – Universal F3
Oven Cabinet Frame Dimensions C3
Oven Cabinet Single w/3” Stiles F3
Oven Cabinet Support Platform F5
Oven Drawer Kit F3
PPantry Cabinet F2
Pantry Cabinet Shelf Kit F4
Partial Overlay – Concealed Hinges C1
Pegged Deep Drawer Organizer E30
Peninsula Base Blind Corner Double Door E20
Peninsula Base Blind Corner Single Door E19
Peninsula Base Blind Corner w/Two Deep Full-Width Trays E20
Peninsula Base Blind Corner w/Two Full-Width Trays E20
Peninsula Base Double Door E8
Peninsula Base Double Door w/Two Deep Full-Width Trays E8
Peninsula Base Double Door w/Two Full-Width Trays E8
Peninsula Base Single Door E7
Peninsula Base Single Door w/Two Deep Full-Width Trays E7
Peninsula Base Single Door w/Two Full-Width Trays E7
Peninsula Wall Angle D12
Peninsula Wall Blind Corner D10
Peninsula Wall Double Door 18” H D6
Peninsula Wall Double Door 23 1/2” H D7
Peninsula Wall Double Door 30” H D7
Peninsula Wall Single Door 18” H D6
Peninsula Wall Single Door 23 1/2” H D6
Peninsula Wall Single Door 30” H D7
Plain Square Posts K13
Plywood Ends – PE C7
Premium Painted Finishes B2
Premium Stain w/Glaze Finishes B2
QQuarter Round Molding K6
RRadius Cabinet Molding K5
Removable Sink Front E15
Rexton Cherry A2
Rexton Maple A6
Roll-out Tray Field Installation Chart J4
Roll-out Trays Double Faced Field Installation J4
Roll-out Trays Field Installation J6
Roll-out Trays Solid Wood Field Installation J7
Roman Spindles K13
Rope Molding K8
Rusty Flower Knob K16
SSatin Aluminum Boat Cleat Transitional Pull K19
Satin Aluminum Knob K15
Satin Nickel Canoe Pull K20
Satin Nickel Diminishing Knob K18
Satin Nickel Football Shaped Knob K17
Satin Nickel Fusilli Pull K20
Satin Nickel Rope Knob K14
Satin Nickel Rope Pull K19
Satin Nickel Round Knob K15
Satin Nickel Suitcase Pull K18
Satin Nickel Traditional Pull K19
Satin Nickel Transitional Pull K22
Satin Nickel Wavy Pull K21
Satin Nickel Wire Cable Pull K19
Savannah Mullion Glass C10
Scribe Cove Molding K6
Scribe Molding K6
Shelf Kits J3
Shoe Molding K7
Single Bead Pilaster K7
Single Bead Round Edge K5
Sink Base Angle E13
Sink Front E14
Sink Front Angle E14
Sink Front Angle Floor E31
Sink Front Angle Full-Height E14
Sink Front Floor E31
Index
Index
Item Page Item Page Item Page
3
Sink Front Full-Height E14
Sliding Towel Bar E28
Small Starter Molding K3
Soffit Crown Molding K3
Solid Bright Brass Knob K14
Solid Wood Stock K9
Solid Wood Wall End Open Shelf D13
Spice Drawer Cabinet D20
Spice Drawer Insert Kit E30
Spindles K13
Standard Stains B1
Stem Glass Holder D23
Swing-Out Pantry Rack F4
tTall End Panel F6
Tall End Panel w/Stile F6
Tall Filler F5
Tall Filler Overlay F5
Tall Fluted Filler F5
Tall Frame Dimensions C4
Talmadge Cherry A3
Talmadge Maple A6
Talmadge Oak A7
Tambour Storage D20
Tambour Storage Angle D20
Tapered Leg K12
Tapestry Corbel K11
Tapestry Foot K11
Tapestry Insert Molding K8
Tapestry Leg K11
Toe Kick E31
Toe Kick Backer E31
Touch-Up Kit L3
Touch-Up Quart L3
Touch-Up Pen L4
Traditional Base Board K7
Traditional Mullion Glass C10
Tri-View Mirror G9
Triple Bead Edging K5
Triple Bead Pilaster K8
Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull K21
Tumbled Dark Gunmetal Round Knob K17
UUnder Cabinet Molding K6
Under Cabinet Shelf D22
Under Cabinet Shelf Corner D22
Under Sink Tote E27
Universal Access Panel E15
Universal Base Double Door M1
Universal Base Double Door w/Four Deep Trays M3
Universal Base Double Door w/Four Trays M3
Universal Base Double Door w/Two Deep Full-Width Trays M2
Universal Base Double Door w/Two Full-Width Trays M2
Universal Base Full-Height Double Door M5
Universal Base Full-Height Double Door w/Four Deep Trays M6
Universal Base Full-Height Double Door w/Four Trays M6
Universal Base Full-Height Double Door w/Two Deep Full-Width Trays M5
Universal Base Full-Height Double Door w/Two Full-Width Trays M5
Universal Base Full-Height Single Door M4
Universal Base Full-Height Single Door w/Two Deep Full Width Trays M4
Universal Base Full-Height Single Door w/Two Full Width Trays M4
Universal Base Pull-out Table M3
Universal Base Pull-Out Table w/Two Deep Full-Width Trays M4
Universal Base Pull-Out Table w/Two Full-Width Trays M3
Universal Base Single Door M1
Universal Base Single Door w/Two Deep Full-Width Trays M2
Universal Base Single Door w/Two Full-Width Trays M2
Universal Base Three Drawer M6
Universal Design Frame Dimensions C6
Universal Lazy Susan M6
Universal Removable Sink Front M7
Universal Sink Front Doors M7
Universal Sink Front Kit M7
Universal Toe Kick M5
Utensil Tray Kit E30
Utility Cabinets 12” Deep F1
Utility Cabinets 24” Deep F2
VValance Raised Panel K1
Valance Shaker K1
Valance Traditional K1
Vanity Base Double Door G5
Vanity Base Drawer G7
Vanity Base Four Drawer G7
Vanity Base Full-Height Double Door G6
Vanity Base Full-Height Four Door G6
Vanity Base Full-Height Single Door G5
Vanity Base Full-Height Three Door G6
Vanity Base Single Door G5
Vanity Combination Drawer (2) G3
Vanity Combination Drawer (3) G3
Vanity Combination Drawer (6) G4
Vanity Combination Drawer (8) G4
Vanity Filler G10
Vanity Fluted Filler G10
Vanity Linen Cabinet G8
Vanity Linen Cabinet Short G8
Vanity Sink Base Double Door G1
Vanity Sink Base Four Door G2
Vanity Sink Base Four Drawer G3
Vanity Sink Base Three Door G2
Vanity Sink Base Three Drawer G2
Vanity Sink Base Two Drawer G2
Vanity Tall Dimensions C5
Vanity Wall Boutique G9
Vanity Wall Boutique w/Towel Bar G9
Vanity Wall Cabinet G8
Venetian Bronze Copper French Lace Knob K18
WWall and Base Frame Dimensions C3
Wall Angle 12” Deep D10
Wall Angle 15” Deep D11
Wall Blind Corner Cabinet Information D8
Wall Blind Corner Double Door D9
Wall Blind Corner Single Door D9
Wall Blind Corner Single Door 36” H D9
Wall Blind Corner Single Door 39” and 42” H D10
Wall Box D25
Wall China Display 12” Deep 15” H D15
Wall Corner Angle D13
Wall Double Door 12” H D1
Wall Double Door 15” H D2
Wall Double Door 18” H D2
Wall Double Door 20 1/2” and 23 1/2” H D3
Wall Double Door 27” H D4
Wall Double Door 30” H D4
Wall Double Door 36” H D5
Wall Double Door 39” and 42” H D5
Wall Easy Reach D11
Wall End Corner D13
Wall Filler D24
Wall Filler Overlay D24
Wall Filler Pull-out D21
Wall Fluted Column D25
Wall Fluted Filler D24
Wall Hood Blower D19
Wall Hood Classic Chimney D18
Wall Hood Cove D19
Wall Hood Front D18
Wall Hood Front Blower D19
Wall Hood Liner D19
Wall Microwave Cabinet 36” H D16
Item Page
Inde
x
Index
Item Page Item Page
4
Wall Microwave Cabinet 45” H D16
Wall Microwave Shelf D17
Wall Microwave Shelf Cabinet D17
Wall Open Cabinet D14
Wall Refrigerator 24” Deep 12” H D1
Wall Refrigerator 24” Deep 15” H D2
Wall Refrigerator 24” Deep 18” H D3
Wall Refrigerator 24” Deep 23 1/2” H D3
Wall Refrigerator 24” Deep 27” H D4
Wall Single Door 18” H D2
Wall Single Door 23 1/2” H D3
Wall Single Door 30” H D4
Wall Single Door 36” H D5
Wall Single Door 39” and 42” H D5
Wall Wine Rack Scalloped D15
White Ceramic Knob K14
White Fusilli Pull K20
Wide Scribe Molding K7
Windmere Corbel K12
Windmere Foot K12
Windmere Leg K12
Windmere Rope Molding K9
Wire Stem Glass Holder White D23
Wire Tray Divider Kit E27
Wire Tray Divider Roll-out E27
Wood Lazy Susan E21
Wood Sink Base E11
Wood Sink Base 27” Deep E12
Wood Sink Base 27” Deep w/Utensil Tray E12
Wood Sink Base Full-Height E12
Wood Sink Base w/Utensil Tray E12
Wood Veneer Paneling J1
Woodgrain Laminate Paneling J1
Door Styles
A1Cherry
CherryCherry is a rich multi-colored hardwood, often used in fine furniture. In its raw state, cherry has pinkish-brown hues with occasional shades of white, green, pink or grey. Natural or light stains accent the color variations in cherry, while dark stains soften its complexity. All cherry wood naturally darkens or “mellows” with age.
i Not available on Flaxton Cherry, Glenmoor Cherry, or Talmadge Cherry door styles
Standard StainsPumpernickelStrudel
Premium Stain w/Glaze Finishes(available with an upcharge)Strudel w/Java Glazei
Ambridge Cherry
AF6C1
• Solidwooddoorframewith2 3/16”stilesandrails • Squareveneerv-grooverecessedpanelonwallandbasedoors • 5-piecedrawerfrontwithveneerv-grooverecessedpanel • Groovesare11/2”oncenter • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • SavannahMullionGlass(SV)optionavailableonselectcabinets.
Seespecificcabinetforavailability
Base Wall
°
°
Bellwether Cherry
AF5C1
• Solidwoodmitereddoorframewith2 3/16”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Five-piecemitereddrawerfrontwithsolidwoodrecessedpanel • Solidwooddrawerframewith2 3/16”stilesandrails,exceptdrawerfronts
4 1/8”tallorless,whichhave1 1/2”stilesandrails • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionavailableonselectcabinets.Seespecificcabinetfor
availability
Base Wall
°
Chesterhill Cherry
AF7C1
• Solidwooddoorframewith2 7/8”stilesandrails • Squareveneerrecessedcenterpanelwithsolidwoodappliedmoldingonwall
and base doors • 5-piecedrawerfrontwithsolidwoodpanelandsolidwoodappliedmolding • Solidwooddrawerframewith2 7/8”stilesand1 1/2”rails,exceptdrawer
fronts4 1/8”tallorlessareslab;9 3/4”tallorgreaterhave2 7/8”stilesandrails • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionavailableonselectcabinets.Seespecificcabinetfor
availability
Base Wall
°
Doo
r Sty
les
A2 Cherry
Flaxton Cherry
AF3C1
• Veneerslabonwallandbasedoors • Slabdrawerfrontisveneer • Doorshaveverticalgrain;drawerfrontshavehorizontalgrain • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • Wallglassdoorsfeaturesolidwoodstilesandrails • BistroGlass(BIS)optionavailableonselectcabinets.Seespecificcabinetfor
availability
Base Wall
°
Fox Pointe Cherry
AE7C1
• Solidwooddoorframewith2 3/16”stilesandrails • Squareveneerraisedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
Glenmoor Cherry
AF1C1
• Solidwoodmitereddoorframewith2 3/16”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Partialoverlaydoordesign • Concealedhinge • Decorativehardwareisoptional • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
Rexton Cherry
AF2C1
• Solidwooddoorframewith3˝stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • DeluxeRecessedPanelDrawer(DRPD)frontavailable • DRPDdrawerfrontwithsolidwood3”stilesand1 1/2”railsandsolidwood
centerpanelexceptfor9 3/4”tallortallerwhichhave3”rails • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
DRPD shown
Door Styles
A3Cherry
Talmadge Cherry
AE6C1
• Solidwooddoorframewith2 7/8”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)andSavannahMullionGlass(SV)optionavailableonselect
cabinets.Seespecificcabinetforavailability
Base Wall
°
°
Doo
r Sty
les
A4 Maple
MapleMapleisastrongwoodthatisprimarily
off-white in its raw state. However, maple
sometimes contains light hues of yellow-
brown and pink as well as light tan or
reddish-tinged streaks that darken with
stain. Typically straight-grained, maple
can be wavy or even curly. Hard maple
offers more uniformity than other wood
types, making it ideal for living spaces that
feature a clean, streamlined appearance.
i NotavailableonFlaxtonMaple,GlenmoorMaple,orTalmadgeMapledoorstyles
Standard StainsAllspiceChutneyNaturalPepperPoppy SeedPumpernickelToasted Sesame
Premium Painted Finishes(available with an upcharge)BrieMeringue
Premium Stain w/Glaze Finishes(available with an upcharge)Allspice w/Ebony GlazeiNatural w/Java GlazeiToasted Sesame w/Java Glazei
Premium Paint w/Glaze Finishes(available with an upcharge)Brie w/Pumpkin GlazeiBrie w/Tuscan GlazeiMeringue w/Tuscan Glazei
Ambridge Maple
AF6M1
Base Wall
°
°
Bellwether Maple
AF5M1
• Solidwoodmitereddoorframewith2 3/16”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Five-piecemitereddrawerfrontwithsolidwoodrecessedpanel • Solidwooddrawerframewith2 3/16”stilesandrails,exceptdrawerfronts
4 1/8”tallorless,whichhave1 1/2”stilesandrails • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionavailableonselectcabinets.Seespecificcabinetfor
availability
Base Wall
°
• Solidwooddoorframewith2 3/16”stilesandrails • Squareveneerv-grooverecessedpanelonwallandbasedoors • Groovesare11/2”oncenter • 5-piecedrawerfrontwithveneerv-grooverecessedpanel • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • SavannahMullionGlass(SV)optionavailableonselectcabinets.
Seespecificcabinetforavailability
Door Styles
A5Maple
Chesterhill Maple
AF7M1
• Solidwooddoorframewith2 7/8”stilesandrails • Squareveneerrecessedcenterpanelwithsolidwoodappliedmoldingonwall
and base doors • 5-piecedrawerfrontwithsolidwoodpanelandsolidwoodappliedmolding • Solidwooddrawerframewith2 7/8”stilesand1 1/2”rails,exceptdrawer
fronts4 1/8”tallorlessareslab;9 3/4”tallorgreaterhave2 7/8”stilesandrails • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionavailableonselectcabinets.Seespecificcabinetfor
availability
Base Wall
°
Flaxton Maple
AF3M1
• Veneerslabonwallandbasedoors • Slabdrawerfrontisveneer • Doorshaveverticalgrain;drawerfrontshavehorizontalgrain • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • Wallglassdoorsfeaturesolidwoodstilesandrails • BistroGlass(BIS)optionavailableonselectcabinets.Seespecificcabinetfor
availability
Base Wall
°
Fox Pointe Maple
AE7M1
• Solidwooddoorframewith2 3/16”stilesandrails • Squareveneerraisedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
Glenmoor Maple
AF1M1
• Solidwoodmitereddoorframewith2 3/16”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Partialoverlaydoordesign • Concealedhinge • Decorativehardwareisoptional • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
Doo
r Sty
les
A6 Maple
Rexton Maple
AF2M1
• Solidwooddoorframewith3˝stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • DeluxeRecessedPanelDrawer(DRPD)frontavailable • DRPDdrawerfrontwithsolidwood3”stilesand1 1/2”railsandsolidwood
centerpanelexceptfor9 3/4”tallortallerwhichhave3”rails • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
DRPD shown
Talmadge Maple
AE6M1
• Solidwooddoorframewith2 7/8”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)andSavannahMullionGlass(SV)optionavailableonselect
cabinets.Seespecificcabinetforavailability
Base Wall
°
°
Door Styles
A7Oak
OakOak has a prominent, open grain ranging
in color from white, to yellow, to reddish
brown.Sometimesstreakedwithgreen,
yellow or black mineral deposits, red oak’s
strong grain often varies from closely knit
to a distinctive, sweeping arch pattern.
Standard StainsNaturalPepperPumpernickelStrudel
Glenmoor Oak
AF1O1
• Solidwoodmitereddoorframewith2 3/16”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Partialoverlaydoordesign • Concealedhinge • Decorativehardwareisoptional • BistroGlass(BIS)optionandTraditionalMullionGlass(MD)optionavailable
onselectcabinets.Seespecificcabinetforavailability
Base Wall
°
Talmadge Oak
AE6O1
• Solidwooddoorframewith2 7/8”stilesandrails • Squareveneerrecessedpanelonwallandbasedoors • Slabdrawerfrontissolidwood • Fulloverlaydoordesign • Concealedhinge • Decorativehardwareisrequired • BistroGlass(BIS)andSavannahMullionGlass(SV)optionavailableonselect
cabinets.Seespecificcabinetforavailability
Base Wall
°
°
Doo
r Sty
les
A8 Notes
Notes
Finishes
B1Finishes
Wood Species and Finish Availability Chart
Finish Terminology - End Grain End grain surfaces and softer areas of the wood may accept more stain and
often appear darker than other surfaces. This is a natural reaction when finishing wood products and potential variances cannot be controlled.
- Joint Lines Since wood is in a constant state of expansion and contraction, visible lines
are normal at the joints on the cabinet face frames and doors. This does not weaken the finish or the strength of the joint.
- Telegraphing All wood species show some wood grain. The amount of grain will vary
by species and finish. Oak is an open or coarse grain wood. The grain will “telegraph” or visibly show through the stain. Maple is a closed or fine grain wood. Some “telegraphing” will occur, though the effect will be subtle.
- Semi-Opaque Color Finishes Semi-opaque finishes feature a heavily pigmented stain utilizing a hand-
applied process. They are semi-opaque, which may telegraph some of the natural beauty of wood. Joint lines and telegraphing may occur with any semi-opaque finish.
Wood products, including cabinet doors and face frames, are typically affected by environmental conditions. Color variation over time, as well as normal movement due to wood’s expansion and contraction is part of the natural beauty of wood. This normal movement may cause hairline cracks in the finish surface at the joints and is considered a normal characteristic of semi-opaque or painted finishes. This will not be considered a reason for product replacement.
Note: Based on independent testing, discoloration will occur to doors, drawers and cabinet parts after prolonged exposure to tobacco smoke. This is especially noticeable on white and other lighter finishes. However, KraftMaid Cabinetry does not warranty any of its finishes against discoloration due to exposure to smoke.
Standard Stains - Stain Finish Process Stained finishes truly showcase the natural beauty and characteristics
inherent in each individual wood species. Based on the stain color chosen, a toner may be applied to the wood to equalize natural sap levels. The stain color is applied and hand-rubbed to ensure full and equal color coverage for doors and drawer fronts.
Finish availability may vary by door style. See Finish Availability Chart - Allspice Rich medium brown Available on Maple door styles - Chutney A deep dark burgundy finish Available on Maple door styles - Natural Two coats of clear, colorless topcoat on unstained wood Available on Maple and Oak door styles - Pepper Deep semi-transparent dark brown Available on Maple and Oak door styles - Poppy Seed A sheer, rich grey stain that enhances the beauty of the woodgrain Available on Maple door styles - Pumpernickel A warm, rich brown finish with deep brown undertones and black overtones Available on Cherry, Maple and Oak door styles - Strudel A rich golden brown finish Available on Cherry and Oak door styles - Toasted Sesame A golden finish with yellow overtones Available on Maple door styles
Cher
ry
Map
le
Oak
Allspice l
Allspice w/Ebony Glaze I
Brie ;
Brie w/Pumpkin Glaze I
Brie w/Tuscan Glaze I
Chutney l
Meringue ;
Meringue w/Tuscan Glaze I
Natural l l
Natural w/Java Glaze I
Pepper l l
Poppy Seed l
Pumpernickel l l l
Strudel l l
Strudel w/Java Glaze I
Toasted Sesame l
Toasted Sesame w/Java Glaze I
l Available as standard
; Available at a premium upcharge
I Available on select door styles at a premium upcharge
Fini
shes
B2 Finishes
Premium Painted Finishes - Painted Finish Process Painted finishes feature rich, beautiful color while allowing some of the
natural beauty of the wood to show. Several coats of rich, semi-opaque paint coat the wood using an automated
application process. Natural wood characteristics such as gum pockets, streaks and pin knots may
be visible, particularly with some of our lighter paints. These characteristics tend to be more pronounced on the backs of our doors and drawers.
Since wood naturally expands and contracts, you may see hairline separation in the finish surface at the joints. Joint lines are normal and do not affect the strength of the door’s construction.
Painted finishes are available only on maple due to the more uniform appearance and smooth, clean characteristics of this wood.
- Brie Creamy white painted finish Available on Maple door styles - Meringue White painted finish Available on Maple door styles
Premium Stain w/Glaze Finishes - Stain w/Glaze Finish Process The base stain is applied followed by the application of a glaze finish to the
entire door or drawer front to add richness and warmth to wood surfaces. The glaze is hand-applied to detail the recesses of applicable door and drawer
designs. As a final step, a heat activated topcoat is applied to provide a beautiful and
durable furniture finish. Each door design, wood species and glaze finish has its own charming
character and will create a unique one-of-a-kind look. Finish availability may vary by door style. See Finish Availability Chart. - Allspice w/Ebony Glaze Rich medium brown with charcoal (black) glaze Available on select Maple door styles - Natural w/Java Glaze Clear sealer and topcoat with dark brown glaze Available on select Maple door styles - Strudel w/Java Glaze A rich golden brown finish with dark brown glaze Available on select Cherry door styles - Toasted Sesame w/Java Glaze A golden finish with yellow undertones and dark brown glaze Available on select Maple door styles
Premium Paint w/Glaze Finishes - Painted w/Glaze Finish Process Several coats of rich, semi-opaque paint are applied and allowed to saturate
the hardwood developing richness. Natural wood characteristics such as gum pockets, streaks and pin knots may be visible, particularly with some of the lighter paints. These characteristics tend to be more pronounced on the backs of doors and drawers.
After the painting process is performed, a glaze finish is applied to the entire surface to add warmth. The glaze is then hand-wiped to create soft, light “hang up” in profiles and recesses of the wood
As a final step, a heat activated topcoat is applied to provide a beautiful and durable furniture finish.
Each door design, wood species and glaze finish has its own charming character and will create a unique one-of-a-kind look.
Finish availability may vary by door style. See Finish Availability Chart. - Brie w/Pumpkin Glaze Creamy white painted finish with brown glaze Available on select Maple door styles - Brie w/Tuscan Glaze Creamy white painted finish with light grey glaze Available on select Maple door styles - Meringue w/Tuscan Glaze Painted white painted finish with light grey glaze Available on select Maple door styles
Finishes
B3Finishes
Finish & Species Code
Allspice Maple C53M
Allspice w/Ebony Glaze Maple C54M
Brie Maple C55M
Brie w/Pumpkin Glaze Maple C56M
Brie w/Tuscan Glaze Maple C57M
Chutney Maple C58M
Meringue Maple C59M
Meringue w/Tuscan Glaze Maple C60M
Natural Maple C61M
Natural Oak C61O
Natural w/Java Glaze Maple C62M
Finish Code Chart
Finish & Species Code
Pepper Maple C63M
Pepper Oak C63O
Poppy Seed Maple C64M
Pumpernickel Cherry C65C
Pumpernickel Maple C65M
Pumpernickel Oak C65O
Strudel Cherry C66C
Strudel Oak C66O
Strudel w/Java Glaze Cherry C67C
Toasted Sesame Maple C68M
Toasted Sesame w/Java Glaze Maple C69M
Finish Availability ChartAllspice Maple – Toasted Sesame w/Java Glaze Maple
l Available as standard ; Available at a premium upcharge
C53
M
C54
M
C55
M
C56
M
C57
M
C58
M
C59
M
C60
M
C61
M
C61
O
C62
M
C63
M
C63
O
C64
M
C65
C
C65
M
C65
O
C66
C
C66
O
C67
C
C68
M
C69
M
Alls
pice
Map
le
Alls
pice
w/E
bony
Gla
ze M
aple
Brie
Map
le
Brie
w/P
umpk
in G
laze
Map
le
Brie
w/T
usca
n G
laze
Map
le
Chut
ney
Map
le
Mer
ingu
e M
aple
Mer
ingu
e w
/Tus
can
Gla
ze M
aple
Nat
ural
Map
le
Nat
ural
Oak
Nat
ural
w/J
ava
Gla
ze M
aple
Pepp
er M
aple
Pepp
er O
ak
Popp
y Se
ed M
aple
Pum
pern
icke
l Che
rry
Pum
pern
icke
l Map
le
Pum
pern
icke
l Oak
Stru
del C
herr
y
Stru
del O
ak
Stru
del w
/Java
Gla
ze C
herr
y
Toas
ted
Sesa
me
Map
le
Toas
ted
Sesa
me
w/Ja
va G
laze
Map
le
Ambridge Cherry AF6C1 l l ;
Ambridge Maple AF6M1 l ; ; ; ; l ; ; l ; l l l l ;
Bellwether Cherry AF5C1 l l ;
Bellwether Maple AF5M1 l ; ; ; ; l ; ; l ; l l l l ;
Chesterhill Cherry AF7C1 l l ;
Chesterhill Maple AF7M1 l ; ; ; ; l ; ; l ; l l l l ;
Flaxton Cherry AF3C1 l l
Flaxton Maple AF3M1 l ; l ; l l l l l
Fox Pointe Cherry AE7C1 l l ;
Fox Pointe Maple AE7M1 l ; ; ; ; l ; ; l ; l l l l ;
Glenmoor Cherry AF1C1 l l
Glenmoor Maple AF1M1 l ; l ; l l l l l
Glenmoor Oak AF1O1 l l l l
Rexton Cherry AF2C1 l l ;
Rexton Maple AF2M1 l ; ; ; ; l ; ; l ; l l l l ;
Talmadge Cherry AE6C1 l l
Talmadge Maple AE6M1 l ; l ; l l l l l
Talmadge Oak AE6O1 l l l l
Fini
shes
B4 Finishes
Notes
Specifications and Options
C1Cabinet Specifications
Cabinet Specifications
Construction Options and Modifications
Full Overlay – Concealed Hinges
• Full Overlay doors leave 3/16˝ of the cabinet’s face frame exposed on either sides of the doors and 3/8” exposed between doors
• Butt door cabinets have 1/8” reveal between doors
• Nickel-finished self-closing hinges, adjustable six ways for perfect alignment
• The reveals shown here may vary slightly on some cabinets due to actual door/drawer front sizes used. Refer to the replacement part section of the book for actual door/drawer sizes for specific cabinets⁄" reveal
⅜" reveal
top view
side view
⁄" ⁄"
⅜"
⅜" ⅜"
⅜"
⅜"
Partial Overlay – Concealed Hinges
• Partial overlay doors leave 7/8” of the cabinet’s face frame exposed on either side of the doors and 1 3/4” exposed between doors
• Butt door cabinets have 1/8” reveal between doors
• Nickel-finished self-closing hinges, adjustable six ways for perfect alignment
• The reveals shown here may vary slightly on some cabinets due to actual door/drawer front sizes used. Refer to the replacement part section of the book for actual door/drawer sizes for specific cabinets ⅞" reveal
1¾" reveal
⅞"⅞"
top view
side view
1"
1"
1"
1"
1"
Spec
ifica
tion
s and
Opt
ions
C2 Cabinet Specifications
Cabinet Specifications
• (1) 3/8” (Wall) or 1/4” (Tall) engineered wood with Natural Maple laminate clad back panel unless otherwise noted.
• (2) 3/8” (Wall) or 1/4” (Tall) engineered wood hanging rail. • (3) 1/2” thick engineered wood ceiling with Natural Maple
laminate. • (4) 3/4” thick solid hardwood front frame constructed using
industrial grade glue and hardened steel fasteners. Front frame species complements selected door style.
• (5) Extensive and unique door style and wood species selection in Cherry, Maple and Oak. Solid and wood veneer construction available.
• (6) Clear Polycarbonate shelf rests for all cabinets. Easily adjustable positive locking shelf clips for all cabinets. Double door wall cabinets use non-locking clips on the frame center stile.
• (7) Natural Maple laminate interior. • (8) 3/4” thick, fully adjustable, engineered wood shelving
with Natural Maple laminate. • (9) 1/2” thick engineered wood floor with Natural Maple
laminate. • (10) 3” solid hardwood center stile except on BUTT door
cabinets. Exterior is finished to match door; interior is unfinished.
• (11) 1/2” engineered wood corner gussets dadoed and glued to cabinet corners.
• (12) 1/4” base and vanity thick engineered wood with Natural Maple laminate clad base back panel.
• (13) 11/16” thick x 2 1/4” wide solid Pine or Douglas Fir installation rail on Base and Vanity Cabinets.
• (14) Standard drawer runners with adjustable front corners and a 75 pound load capacity feature full extension, concealed under-mount slide system with SoftAction+*closing mechanism that allows the drawer to gently close.
• (15) 3/4” thick, solid wood, full-depth, dovetailed drawer featuring four sided construction and 5.2mm plywood bottom. Drawers 30” and wider have 3/8” solid hardwood cleat underneath for additional support.
• (16) Self-closing, concealed, 6-way adjustable hinges on most doors.
• (17) 3/4” thick, full-depth, fully adjustable engineered wood shelving with Natural Maple laminate.
• (18) Drawer heads are solid hardwood or wood veneer to complement each door style.
• (19) Fully closed toe space area: Standard Toespace: 4 1/2” tall x 2 25/32” deep
Universal Toespace: 5 1/2” tall x 2 25/32” deep • (20) 3/8” thick (Wall, Base and Vanity) or 1/2˝ thick (Tall)
engineered wood side panels with Natural Maple laminate to match door and frame.
8
7
3
2
1
4
10
9
5
6
12
14
20
13
15
19
17
18
6
16
Concealed Hinge
11
Specifications and Options
C3Cabinet Specifications
Wall and Base Frame Dimensions
B
+3"
*5"
30"*20 1⁄2"
4 1⁄2"
BD•3
*5"
*9 3⁄8"
*9 5⁄8"
B•FH
*27"
BMC
*17 1⁄2"
*15 7⁄8"
*9 1⁄8"
DSB BD•4
*5"
*5"
*5"
*8"
1 1⁄2" Countertop
12" 39" 36" 30" 27" 23 1⁄2" 20 1⁄2" 18" 15"
*36"*33"*27"*24"*20 1⁄2"*17 1⁄2"*15"*12"*9"
Wall Cabinet Heights 42"
*39"
11"
2"
B•2
*12"
*12"
2 1⁄2"
1 3⁄4"
34 1⁄2"
DOS
*15 ½˝
1 3⁄4"
1 1⁄4"
Oven Cabinet Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates stiles are removed on butt door cabinets • OC cabinets with stain have 1 1/2” face frame stiles. Brie and Meringue will have 3” face frame stiles
* 20 1 ⁄2"* 20 1 ⁄2"
3"* 20 1 ⁄2"
90"
* 15"
84"
OC_S
* 21" min. width * 25" max. width
* 24" * 27"
93"
3"* 20 1⁄2"
90"
* 15"
84"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
OC_S
Oven Cabinet Single Heights
* 21" min. height * 38" max. height
* 24" min. width * 28" max. width
* 21" min. width * 25" max. width
* 27" min. width * 31" max. width * 21" min. width
* 25" max. width* 24" min. width * 28" max. width
* 27" min. width * 31" max. width
* 21" min. width * 25" max. width
* 211 ⁄2" min. height * 381 ⁄2" max. height
* 21" min. height * 38" max. height
* 21" min. height * 38" max. height
* 233 ⁄4" min. height* max height dependentupon desired shelf count
* 233 ⁄4" min. height
* max height dependent
upon desired shelf count
* 233 ⁄4" min. height* max height dependentupon desired shelf count
* 241 ⁄4" min. height* max height dependentupon desired shelf count
OC_U OC_U OC_U
Oven Cabinet Universal Heights
13⁄4"13⁄4"
* 24"
* 20 1 ⁄2"
93"
OC_S
* 27"
* 20 1 ⁄2"
96"
OC_S
96"
OC_U
13⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
13⁄4"
* 4 3⁄4"
* 4 3⁄4"
* 4 3⁄4"
41⁄2"
791⁄2"851⁄2"881⁄2"911⁄2"
3"
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates stiles are removed on butt door cabinets
Spec
ifica
tion
s and
Opt
ions
C4 Cabinet Specifications
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets
3"
2"
*24"
*59 1⁄2"
93"
3"
*59 1⁄2"
*20 1/2"
90"
3"
2"
*59 1⁄2"
*15"
84"
2"
*27"
96"
2 1⁄2"
*20 1/2"
90"
2"
*15"
84"
Tall Cabinet Heights
3"
2"
*27"
*59 1⁄2"
96"
2"
*24"
93"
4 1⁄2"
79 1⁄2"85 1⁄2"88 1⁄2"91 1⁄2"
*59 1⁄2"*59 1⁄2"*59 1⁄2"*59 1⁄2"
2 1⁄2"
U152484 U152490 U152493 U152496 U302484BUTT U302490BUTT U302493BUTT U302496BUTT
30"
VSB
*5"
*17 1⁄2"
4 1⁄2"
27"
VD•3
*5"
*8"
*8"
*20 1⁄2"
*5"
1 1⁄2" Countertop
48"*45"
VSB•2
*5"
*17 1⁄2"
*5"
3" 3" 3"
4 1⁄2" 4 1⁄2"
VSB•2
*5"
*17 1⁄2"
*8"
*8"
VCD•2
*5"
*17 1⁄2" 3"
*5"
VWB2430 VLC1848
+ 311⁄2˝
Tall Frame Dimensions
31 1/2” Vanity Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates stiles are removed on butt door cabinets
Specifications and Options
C5Cabinet Specifications
34 1/2” Vanity Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates stiles are removed on butt door cabinets
*8"
*5"
*20 ½˝ *20 ½˝ *20 ½˝ *20 ½˝*5"3"
*5"
*45"
*20 ½˝
*5"
30"
4 ½˝
*5" *5"
*5"
*5"
1 ½˝ Countertop
*5" *5"
3" 3" 3"
4 ½˝ 4 ½˝ *5" *5"
*8"
30" 48"
VWB2430BUTT VLC1848
VCD•3 VSB•2 VSB•2 VSB VD•4
+ 34 ½˝
1 1⁄4"1 1⁄4"
Vanity Tall Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide
2"
*27"
*59 1⁄2"
96"
21/2"
*20 1/2"
*59 1⁄2"
90"
2"
*15"
*59 1⁄2"
84"
Vanity Linen Cabinet Heights
4 1⁄2"
79 1⁄2"85 1⁄2"91 1⁄2"
VLC151884 VLC151896VLC151890
Spec
ifica
tion
s and
Opt
ions
C6 Cabinet Specifications
Office Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide
DDRDKDT
*5"
*5"
*8"
DFD
*5"
*15"
5 ⁄˝
4 ½˝
24 ½˝
*18"
*39"
WOC
1 ½˝ Countertop
2"
4 ½˝ 4 ½˝
⁄˝
*3"
60”
29˝
Universal Design Frame Dimensions
• Vertical opening sizes are preceded by an asterisk (*) • Unless otherwise noted, all stiles and rails are 1 1/2” wide • 3” wide vertical stiles divide double door cabinets, + indicates stiles are removed on butt door cabinets
UBD•3
*8"
*8"
UBT
*4 ½˝
UB•FH
27"
UB•FH
*24" *24"
1 1⁄2" Countertop
UB
+3"
+3"
*5" *5"
*17 ½˝ *17 ½˝
5 ½˝
2" 32 ½˝
Specifications and Options
C7Construction Options
Construction Options
Construction Options and Modifications
I - - - Available with exceptions l- - - - Available with an upcharge v- - - - Included as standard (Blank) - Not Available
Use the option availability chart at the right of each item to determine which construction options are available for your desired cabinet.
Material dimensions may vary slightly based on lumber industry standards.
Specification subject to change without notice.
PE - - - - - - - - Plywood Ends APC- - - - - - - All Plywood Construction RD9 - - - - - - - Reduce Depth 9” RD12 - - - - - - Reduce Depth 12” RD15 - - - - - - Reduce Depth 15” RD18 - - - - - - Reduce Depth 18” RD21 - - - - - - Reduce Depth 21” ID15 - - - - - - Increase Depth 15” ID18 - - - - - - Increase Depth 18” ID21 - - - - - - Increase Depth 21” ID24 - - - - - - Increase Depth 24” BIS- - - - - - - - Bistro Glass MD - - - - - - - Traditional Mullion Glass SV - - - - - - - - Savannah Mullion Glass 1ROT- - - - - - 1 Roll-out Tray 2ROT- - - - - - 2 Roll-out Trays 3ROT- - - - - - 3 Roll-out Trays 4ROT- - - - - - 4 Roll-out Trays 6ROT- - - - - - 6 Roll-out Trays 1FWROT - - - 1 Full Width Tray 2FWROT - - - 2 Full Width Trays 2DROT - - - - 2 Deep Roll-out Trays 4DROT - - - - 4 Deep Roll-out Trays 6DROT - - - - 6 Deep Roll-out Trays 2DFWROT - - 2 Deep Full Width Roll-out Trays MI - - - - - - - - Matching Interior CFO- - - - - - - Cabinet Front Only
Plywood Ends – PE
PE Full Kitchens
PEB Individual Cabinets
• This construction option affects end panels only
• Available for full or partial kitchen orders
• To order a full kitchen with Plywood Ends, use PE in the header of your order
• To order individual line items with Plywood Ends, dash each line item with PEB; Example: W3030 BUTT-PEB
• 3/8” plywood end panels are available for most Wall and Base cabinets; 1/2” for most Tall cabinets and have a wood veneer exterior and woodgrain laminate interior
• Consult the Plywood Ends (PE) option box for your desired cabinet
• Shelves, ceilings and floors are engineered wood with a Natural Maple laminate
• Plywood End Panels do not receive glaze detailing
l PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Solid hardwood face frameSolid hardwood face frame
Wall, Base, VanityTall
Natural maple laminate
Natural maple laminate
Plywood Plywood
Stain or paint
to matchdoor and
frame
Stain or paint
to match door and
frame
¾˝¾˝
½˝ ⅜˝
Spec
ifica
tion
s and
Opt
ions
C8 Construction Options
All Plywood Construction – APC
APC Full Kitchens
AP Individual Cabinets
• This construction option affects the entire cabinet
• Available for full or partial kitchen orders
• To order a full kitchen with All Plywood Construction use APC in the header of your order
• To order individual line items with All Plywood Construction, dash each line item with AP; Example: W3030 BUTT-AP, B12L-AP
• All Plywood Construction (APC) is available for most cabinets
• Consult All Plywood Construction (APC) option box for your desired cabinet
• This All Plywood Construction option features:• 1/2” plywood base, vanity, and tall end
panels• 1/2” plywood wall and tall floors and ceilings,
corner gussets and toe kick backer• 1/2” plywood base and vanity floors• 3/8” plywood wall backs• 1/4” plywood base and vanity backs• 1/4” plywood tall backs except for PC and
U36 which is 3/8” plywood• 5.2 mm plywood drawer bottoms• 3/4” plywood wall, tall, base and vanity
shelves• 3/8” plywood wall hang rails• 1/4” plywood tall hang rails
• Plywood End Panels do not receive glaze detailing
PE
l APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Natural maplelaminate
Wall, Base, Tall and Vanity
Solid hardwood face frame
Plywood
Stain or paint to match door
and frame
¾˝
½˝
Matching Interior
MI • Matching interior option affects:
-End Panels -Shelves -Ceilings and Floors -Back Panel • Interior surfaces are easy
clean laminate I Note: Matching Interior (MI)
option is only available in cabinets with Bistro Glass (BIS), Savannah Mullion (SV) or Traditional Mullion (MD) glass options
• Consult Matching Interior (MI) option box for availability for your desired cabinet
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
I MI
CFO
End Panel
MatchingInterior
Solid hardwood face frame
Specifications and Options
C9Construction Options
Depth Modification
Reduced Depth
RD9
RD12
RD15
RD18
RD21 Increased Depth
ID15
ID18
ID21
ID24
• Some cabinets can be reduced or increased in depth to fit design requirements. See specific cabinet information for availability
• When this option is selected, Cabinet Front Only (CFO) is no longer available
• Select trays are not available with this option. See individual cabinets for specific availability
• Cabinets that normally have drawers ordered less than 18” deep will be replaced with a false front only
• When base cabinets are reduced, shelf will be 10 19/32” deep; shelves 27” wide and over will have a front cleat for additional support, except Base Combination Drawer (BCD) cabinets
Note: Additional support is required for wall cabinets increased to 15” deep or deeper
PE
APC
l RD9
l RD12
l RD15
l RD18
l RD21
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Cabinet Front Only
CFO • Front frame and appropriate doors and drawer fronts only
• Does not include toe kick • Note: Cannot be combined
with any depth modifications or tray options
We recommend using this option on cabinetry containing
no factory installed accessories, since all cabinet components will be eliminated except face frame, doors and drawer fonts. For example, order BCFS36L-CFO instead of LS36L-CFO
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
l CFO
Deluxe Recessed Panel Drawer Front
DRPD • 5-piece drawer front (DRPD) option is only available in Rexton door style; comes standard in Ambridge, Bellwether, and Chesterhill door styles
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
DRPD
Spec
ifica
tion
s and
Opt
ions
C10 Construction Options
Bistro Glass
• 1/8” removable tempered glass
• Available for select wall cabinets
• Note: Available for the following door styles: Bellwether, Chesterhill, Flaxton, Fox Pointe, Glenmoor, Rexton and Talmadge
• Note: Mitered door styles cannot be field modified for glass
• Example: W1830R-1BIS1 (1 Qty, Code, Size) W3636-2BIS2 (2 Qty, Code, Size)
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
l BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Traditional Mullion Glass
• 1/8” removable tempered glass
• Mullions are equally divided • Available for select wall
cabinets • Note: Available for the
following door styles: Fox Pointe, Glenmoor and Rexton
• Note: Mitered door styles cannot be field modified for glass
• Example: W1830R-1MD1 (1 Qty, Code, Size) W3636-2MD2 (2 Qty, Code, Size)
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
l MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Savannah Mullion Glass • 1/8” removable tempered
glass • Available for select wall
cabinets • All doors have two vertical
and two horizontal mullions, except Talmadge 24” wide Butt door cabinets, which have only one vertical mullion
• Note: Available for the following door styles: Ambridge and Talmadge
• Note: Mitered door styles cannot be field modified for glass
• Example: W1830R-1SV1 (1 Qty, Code, Size) W3636-2SV2 (2 Qty, Code, Size)
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
l SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
24” wide Butt door optionsSee notes for
door-speci�c mullion design
18” – 30” H
1BIS1
2BIS1
4BIS1
36” – 42” H
1BIS2
2BIS2
18” – 30” H
1SV1
2SV1
4SV1
36” – 42” H
1SV2
2SV2
18” – 30” H
1MD1
2MD1
4MD1
36” – 42” H
1MD2
2MD2
Specifications and Options
C11Construction Options
1 Roll-out Tray
1ROT
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets
• Natural Maple laminate • Shelves are omitted from
cabinets when ROT options are selected
• Trays 30” and wider will have a 3/8” thick engineered wood bottom
• 3/4 extension side mount glide • 75 lb. capacity • Note: Not available on cabinets reduced to 12”
or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
l 1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
2 Roll-out Trays
2ROT
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets
• Natural Maple laminate • Shelves are omitted from
cabinets when ROT options are selected
• Trays 30” and wider will have a 3/8” thick engineered wood bottom
• 3/4 extension side mount glide • 75 lb. capacity • Note: Not available on cabinets reduced to 12”
or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
l 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
3 Roll-out Trays
3ROT
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for 3 door Base cabinets
• Natural Maple laminate • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide
• 75 lb. capacity • Note: Not available on cabinets reduced to 12”
or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
l 3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
4 Roll-out Trays
4ROT • Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for 2 door Base and Universal cabinets
• Natural Maple laminate • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide • 75 lb. capacity • Note: Not available on cabinets reduced to 12”
or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
l 4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Spec
ifica
tion
s and
Opt
ions
C12 Construction Options
6 Roll-out Trays
6ROT
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for 3 door Base cabinets
• Natural Maple laminate • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide • 75 lb. capacity • Note: Not available on cabinets
reduced to 12” or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
l 6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
1 Full-Width Tray
1FWROT
• Full-width standard tray spans the full width of cabinet
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets
• Natural Maple laminate • Shelves are omitted from
cabinets when ROT options are selected
• Trays 30” and wider will have a 3/8” thick engineered wood bottom
• 3/4 extension side mount glide • 75 lb. capacity • Note: Not available on cabinets reduced to 12”
or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
l 1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
2 Full-Width Trays
2FWROT
• Full-width standard tray spans the full width of cabinet
• Sides and back are 1/2” inch engineered wood with 1/4” engineered wood bottom. Fronts are 3/4” solid hardwood
• Available for most Base and Universal cabinets
• Natural Maple laminate • Shelves are omitted from cabinets
when ROT options are selected • Trays 30” and wider will have
a 3/8” thick engineered wood bottom
• 3/4 extension side mount glide • 75 lb. capacity • Note: Not available on cabinets reduced to 12”
or 15” deep
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
l 2FWROT
2DROT
4DROT
6DROT
2DFWROT
MI
CFO
2 Deep Roll-out Trays
2DROT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most Base and Universal cabinets
• Natural finish • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide • 75 lb. capacity • Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
l 2DROT
4DROT
6DROT
2DFWROT
MI
CFO
Specifications and Options
C13Construction Options
4 Deep Roll-out Trays
4DROT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most Base and Universal cabinets
• Natural finish • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide
• 75 lb. capacity • Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
l 4DROT
6DROT
2DFWROT
MI
CFO
6 Deep Roll-out Trays
6DROT
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for 3 door Base cabinets
• Natural finish • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide
• 75 lb. capacity • Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
l 6DROT
2DFWROT
MI
CFO
2 Deep Full-Width Roll-out Trays
2DFWROT
• Full-width deep tray spans the full width of cabinet
• Sides, front and back, are 1/2” solid hardwood with 3-ply 5.2mm thick plywood bottom panel
• 1 15/16” deep scalloped finger pull cut out
• Available for most Base and Universal cabinets
• Natural finish • Shelves are omitted from
cabinets when ROT options are selected
• 3/4 extension side mount glide • 75 lb. capacity • Only available in 24” deep cabinets
PE
APC
RD9
RD12
RD15
RD18
RD21
ID15
ID18
ID21
ID24
BIS
MD
SV
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
l 2DFWROT
MI
CFO
Spec
ifica
tion
s and
Opt
ions
C14 Notes
Notes
Wall Cabinets
D1Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wall Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Note: Standard wall cabinet box depth is 12˝ unless stated otherwise. Add door thickness with bumpers for total depth.
Caution: Installation of a wall cabinet 30˝ or wider requires additional support, such as attachment to a soffit, or support from below. Failure to provide additional support could result in collapse of the cabinet, serious personal injury, or property damage. Damage relating to failure to provide additional support is not covered by the limited warranty. See inside cover for warranty details.
Any wall cabinet over 24” wide or 30” high with a depth greater than 12” and/or butt doors, in addition to Wine Cabinets and Plate Racks, must be installed between two cabinets, a cabinet and a wall, or supported from below.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - - All Plywood Construction RD9 - - - - Reduce Depth 9” ID15 - - - - Increase Depth 15” ID18 - - - - Increase Depth 18” ID21 - - - - Increase Depth 21” ID24 - - - - Increase Depth 24” BIS - - - - - Bistro Glass MD - - - - Traditional Mullion Glass SV - - - - - Savannah Mullion Glass MI - - - - - Matching Interior CFO - - - - Cabinet Front Only
W 30 12code width height
Wall Double Door 12” H
W2712 (Butt)
W3012 BUTT
W3312 BUTT
W3612 BUTT
W3912
W4212
W4512
W4812
• No shelf • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word
BUTT in all capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn’t required on an order form.
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO12˝
12˝
Wall Refrigerator 24” Deep 12” H
WR3012 BUTT
WR3312 BUTT
WR3612 BUTT
WR3912
WR4212
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO24˝
12˝
Wal
l Cab
inet
s
D2 Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wall Double Door 15” H
W2715 (Butt)
W3015 BUTT
W3315 BUTT
W3615 BUTT
W3915
W4215
W4515
W4815
• No shelf • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO12˝
15˝
Wall Refrigerator 24” Deep 15” H
WR3015 BUTT
WR3315 BUTT
WR3615 BUTT
WR3915
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO24˝
15˝
Wall Single Door 18” H
Specify R or L
W2418 R or L
• No shelf
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
18˝
12˝
Wall Double Door 18” H
W2418 BUTT
W2718 (Butt)
n W3018 BUTT
W3318 BUTT
n W3618 BUTT
W3918
W4218
W4518
W4818
• No shelf • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
18˝
n Available with Bistro Glass (BIS), Savannah Mullion (SV) or Traditional Mullion (MD) glass options with or without Matching Interior (MI)
Wall Cabinets
D3Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wall Refrigerator 24” Deep 18” H
WR3018 BUTT
WR3318 BUTT
WR3618 BUTT
WR3918
WR4218
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO24˝
18˝
Wall Single Door 23 1/2” H
Specify R or L
n W1224 R or L
W1524 R or L
W1824 R or L
W2124 R or L
W2424 R or L
• One adjustable shelf I Bistro Glass (BIS), Savannah Mullion (SV)
and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
23 ½˝
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wall Double Door 20 1/2” and 23 1/2” H
No shelf 20 1/2” High
W3021 BUTT
W3321 BUTT
W3621 BUTT
W3921
W4221
One shelf 23 1/2” High
n W2424 BUTT
W2724 (Butt)
n W3024 BUTT
W3324 BUTT
n W3624 BUTT
W3924
W4224
W4524
W4824
• One adjustable shelf in 23 1/2” high cabinet
• Any wall cabinet over 24˝ wide or 30˝ high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or w thout Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
20 ½˝23 ½˝
Wall Refrigerator 24” Deep 23 1/2” H
WR3624 BUTT
WR3924
WR4224
• No shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support required
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO
24˝
23 ½˝
n Available with Bistro Glass (BIS), Savannah Mullion (SV) or Traditional Mullion (MD) glass options with or without Matching Interior (MI)
Wal
l Cab
inet
s
D4 Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wall Double Door 27” H
W3027 BUTT
W3327 BUTT
W3627 BUTT
W3927
W4227
• One adjustable shelf • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
12˝
27˝
Wall Refrigerator 24” Deep 27” H
WR3627 BUTT
WR3927 • One adjustable shelf • Designed for use over refrigerators where
there is adequate clearance • Additional support required
When designing a built -in refrigerator area, remember that many side by side refrigerators
measure up to 36” wide. If you have the extra space, it is recommended to use at least a 1” filler with a 36” wide Wall Refrigerator (WR) cabinet to assure clearance for the appliance. Also, verify the height of the appliance to make sure you are using the correct Wall Refrigerator cabinet.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO
27˝
24˝
Wall Single Door 30” H
Specify R or L
n W930 R or L
n W1230 R or L
W1530 R or L
W1830 R or L
W2130 R or L
W2430 R or L
• Two adjustable shelves • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
30˝
12˝
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wall Double Door 30” H
n W2430 BUTT
W2730 (Butt)
n W3030 BUTT
n W3330 BUTT
n W3630 BUTT
W3930
W4230
W4530
W4830
• Two adjustable shelves • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
30˝
12˝ n Available with Bistro Glass (BIS), Savannah
Mullion (SV) or Traditional Mullion (MD) glass options with or without Matching Interior (MI)
Wall Cabinets
D5Wall Cabinets Caution! Installation of a wall cabinet 30˝ or wider requires additional support,
such as attachment to a soffit, or support from below.
Wall Single Door 36” H
Specify R or L
n W936 R or L
n W1236 R or L
W1536 R or L
W1836 R or L
W2136 R or L
W2436 R or L
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
36˝
12˝
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wall Double Door 36” H
W2436 BUTT
n W2736 (Butt)
W3036 BUTT
W3336 BUTT
W3636 BUTT
n W3936
n W4236
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
36˝
12˝
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wall Single Door 39” and 42” H
Specify R or L 39” High
n W939 R or L
n W1239 R or L
W1539 R or L
W1839 R or L
W2139 R or L
W2439 R or L
Specify R or L 42” High
n W942 R or L
n W1242 R or L
W1542 R or L
W1842 R or L
W2142 R or L
W2442 R or L
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or w thout Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
39˝42˝
12˝
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wall Double Door 39” and 42” H
39” High
W2439 BUTT
n W2739 (Butt)
W3039 BUTT
W3339 BUTT
W3639 BUTT
n W3939
n W4239
42” High
W2442 BUTT
n W2742 (Butt)
W3042 BUTT
W3342 BUTT
W3642 BUTT
n W3942
n W4242
• Three adjustable shelves • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
I BIS
I MD
I SV
I MI
l CFO
12˝
39˝42˝
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wal
l Cab
inet
s
D6 Peninsula Wall CabinetsNote: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop.
Peninsula Wall Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - Plywood Ends APC - - All Plywood Construction BIS - - - Bistro Glass MD - - - Traditional Mullion Glass SV - - - - Savannah Mullion Glass MI - - - - Matching Interior
PW 30 18code width height
Peninsula Wall Single Door 18” H
PW2418 • No shelf • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
BIS
MD
SV
MI
18˝
12 /˝(excluding doors)
Peninsula Wall Double Door 18” H
n PW2418 BUTT
PW3018 BUTT
PW3618 BUTT
• No shelf • Each side has two doors I Bistro Glass (BIS), Savannah Mullion
(SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
18˝
12/˝(excluding doors)
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Peninsula Wall Single Door 23 1/2” H
n PW1824
PW2124
PW2424
• One adjustable shelf • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
23 ½˝
12 /˝(excluding doors)
n Available with Bistro Glass (BIS), Savannah Mullion (SV) or Traditional Mullion (MD) glass options with or without Matching Interior (MI)
Wall Cabinets
D7Peninsula Wall CabinetsNote: Peninsula wall cabinets must be installed against soffit, ceiling or supported by countertop.
Peninsula Wall Double Door 23 1/2” H
n PW2424 BUTT
PW3024 BUTT
PW3624 BUTT
• One adjustable shelf • Each side has two doors I Bistro Glass (BIS), Savannah Mullion
(SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
I BIS
I MD
I SV
I MI
23 ½˝
12/˝(excluding doors)
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Peninsula Wall Single Door 30” H
n PW1830
PW2130
PW2430
• Two adjustable shelves • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. If a right hinged door is preferred on the kitchen side, install the cabinet with the peninsula side facing the kitchen side
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
30˝
12/˝(excluding doors)
n Available with Bistro Glass (BIS), Savannah Mullion (SV) or Traditional Mullion (MD) glass options with or without Matching Interior (MI)
Peninsula Wall Double Door 30” H
n PW2430 BUTT
PW3030 BUTT
PW3630 BUTT
• Two adjustable shelves • Each side has two doors I Bistro Glass (BIS), Savannah Mullion
(SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
I BIS
I MD
I SV
I MI
30˝
12/˝(excluding doors)
n Not available with Bistro Glass (BIS), Savannah Mullion (SV), Traditional Mullion (MD), or Matching Interior (MI) options
Wal
l Cab
inet
s
D8 Wall Corner Cabinets
Wall Corner Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - -Plywood Ends APC - - - -All Plywood Construction RD9 - - - - -Reduce Depth 9” ID15 - - - -Increase Depth 15” ID18 - - - -Increase Depth 18” ID21 - - - -Increase Depth 21” ID24 - - - -Increase Depth 24” BIS - - - - -Bistro Glass MD - - - - -Traditional Mullion Glass SV - - - - - -Savannah Mullion Glass MI - - - - - -Matching Interior CFO - - - -Cabinet Front Only
WBC 24 30code width height
Wall Blind Corner Cabinet Information
• Wall blind corner cabinets provide access to corner space and permits adjustability of up to 2 7/8” maximum to aid in kitchen cabinet layout. Consult chart for “pull” dimensions and minimum wall space requirements.
• “Pulling” the cabinet away from the corner (2 7/8” maximum), and using the supplied filler and panel provides clearance for opening doors when decorative hardware is used.
• R or L indicates blind end of cabinet. Please specify • Door hinged on same side as blind • Square door cabinets may be changed from right to left by inverting cabinet. • Wall Filler Overlay (WFOL) is available separately for all Full Overlay door styles except Flaxton. Overlays
are used to cover the exposed filler and frame. This provides a continuous door appearance. Overlays must be field cut (mitered) to required width determined by cabinet “pull”. See Filler Overlay Detail below.
• Note: A 3” Wall Filler and Blind Panel is included with each WBC cabinet ordered, shipped unattached.
Wall Filler Overlay Detail Full Overlay Door Styles
No Pull Line
1” Pull
Blind Panel
3” Filler
WBCDoor
Adjoining Cabinet Door
Overlay
3˝ Filler
12 /˝
Adjoining Cabinet
Peninsula Wall Blind Corner
A
B
C
D
WallBlind
Corner
(C)Frame
Opening
Partial Overlay
(B) Cabinet
Width
24"
27"
30"
33"
36"
42"
48"
24"
24"
24"
27"
30"
33"
36"
42"
48"
NoPull
MaxPull
26 /"
29 /"
32 /"
35 /"
38 /"
44 /"
50 /"
26 /"
NoPull
1 /"
1 /"
1 /"
1 /"
1 /"
1 /"
1 /"
MaxPull
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
(A)Wall Space
(D) Door Hardware Clearance
(C)Frame
Opening
Full Overlay
(B) Cabinet
Width
24"
27"
30"
33"
36"
42"
48"
24"
24"
24"
27"
30"
33"
36"
42"
48"
NoPull
MaxPull
26 /"
29 /"
32 /"
35 /"
38 /"
44 /"
50 /"
26 /"
NoPull
MaxPull
(A)Wall Space
(D) Door Hardware Clearance
/"
/"
/"
/"
/"
/"
/"
/"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
3 /"
7 ½"
10 ½"
13 ½"
16 ½"
19 ½"
10 ½", 1 2 "
13 ½", 1 5 "
7 ½"
7 ½"
10 ½"
13 ½"
16 ½"
19 ½"
10 ½", 1 2 "
13 ½", 1 5 "
7 ½"
WBC27
WBC30
WBC33
WBC36
WBC39
WBC45
WBC51
PWBC27 1 /" 4 ½"
Wall Blind Corner
AB
D
C
WBC Cabinet (Blind Right)
Filler and Panel
AdjoiningCabinet
Frame Opening
0˝ to
2 /˝
Right blind shown
Wall Cabinets
D9Wall Corner Cabinets
Wall Blind Corner Single Door 23 1/2” H and 30” H
Specify R or L One shelf 23 1/2” High
WBC3024 R or L
WBC3924 R or L Two shelves
30” High
WBC2730 R or L
WBC3030 R or L
WBC3330 R or L
WBC3630 R or L
WBC3930 R or L
• R or L indicates blind • Adjustable shelves • Door hinged to frame center stile • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
23 ½˝30˝
12˝
Wall Blind Corner Double Door 30” H
Specify R or L
WBC4530 R or L
WBC5130 R or L
• R or L indicates blind • Two adjustable shelves • Two different width doors; the narrower is
located next to the blind panel • Do not pull cabinet more than 2 7/8” from
corner • Blind Panel with 3” filler included, shipped
unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
30˝
12˝
Wall Blind Corner Single Door 36” H
Specify R or L
WBC2736 R or L
WBC3036 R or L
WBC3336 R or L
WBC3936 R or L
• R or L indicates blind • Three adjustable shelves • Door hinged to frame center stile • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO36˝
12˝
Wal
l Cab
inet
s
D10 Wall Corner Cabinets
Wall Blind Corner Single Door 39” and 42” H
Specify R or L 39” High
WBC2739 R or L
WBC3039 R or L
WBC3339 R or L
WBC3939 R or L 42” High
WBC2742 R or L
WBC3042 R or L
WBC3342 R or L
WBC3942 R or L
• R or L indicates blind • Three adjustable shelves • Door hinged to frame center stile • Any wall cabinet over 24˝ wide or 30˝
high with a depth greater than 12˝ and/or with butt doors must be installed between two (2) cabinets, a cabinet and a wall or supported from below
• Do not pull cabinet more than 2 7/8” from corner
• Blind Panel with 3” filler included, shipped unattached
l PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
BIS
MD
SV
MI
l CFO
39˝42˝
12˝
Peninsula Wall Blind Corner 30” H
Specify R or L
PWBC2730 R or L
• R or L indicates blind • Two adjustable shelves • Door hinged to frame center stile • Single door on kitchen side; double doors
on peninsula side • Do not pull cabinet more than 2 7/8” from
corner • Blind Panel with 3” filler included, shipped
unattached
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
CFO
12 /˝
30˝
(excluding doors)
Wall Angle 12” Deep
Specify R or L Two shelves
WA2430 R or L Three shelves
WA2436 R or L
WA2439 R or L
WA2442 R or L
• Adjustable shelves • Back corner removed for easy installation • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of the
corner cabinet may not function properly.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
I BIS
I MD
I SV
I MI
l CFO
30˝36˝39˝42˝
17"
24"
24"12"
12"
Wall Cabinets
D11Wall Corner Cabinets
Wall Angle 15” Deep
Specify R or L Two shelves
WA2730 R or L Three shelves
WA2736 R or L
WA2739 R or L
WA2742 R or L
• Adjustable shelves • Back corner removed for easy installation • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
I Bistro Glass (BIS), Savannah Mullion (SV) and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
l PE
l APC
RD9
ID15
ID18
ID21
ID24
I BIS
I MD
I SV
I MI
l CFO
30˝36˝39˝42˝
17"
27"
27"15"
15"
Wall Easy Reach
Specify R or L Two shelves
WEZR2430 R or L Three shelves
WEZR2436 R or L
WEZR2439 R or L
WEZR2442 R or L
• Adjustable shelves • Two piece bi -fold door with independent
adjustment • 168º hinge opening • Back corner removed for easy installation
Do not design a corner cabinet adjacent to an object deeper than the end panel. The door of
the corner cabinet may not function properly.
l PE
l APC
RD9
ID15
ID18
ID21
ID24
BIS
MD
SV
MI
l CFO
30˝36˝39˝42˝
12˝
24"
24"
12"
12"
12"
Wal
l Cab
inet
s
D12 Peninsula Wall Corner Cabinets
Peninsula Wall Corner Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - All Plywood Construction
PWA 24 30 Lcode width height rear door
placement
Peninsula Wall Angle
Specify R or L
PWA2430 R or L
• Two adjustable shelves • R or L designates dining room side door
hinging • Stile on dining room frame is extra wide to
clear window or door molding • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
• Adjacent cabinets can be installed directly without fillers
• Requires 24 1/16” of wall space excluding dining room side cabinet door
Peninsula Wall Cabinets must be installed against a soffit, ceiling or supported by a countertop. See
Cabinet installation guide for specific instructions
l PE
l APC
30˝
Left hand shown
Left Hand shown
17˝
12˝
24˝
24 /˝
Kitchen Side
Dining Room Side
12 /˝
WallCabinet
Left -HandPeninsula
Wall AngleCabinet
PeninsulaWall
Cabinet
17˝
12˝
Right Hand shown
24˝
24 /˝
Kitchen Side
Dining Room Side
12 /˝
WallCabinet
Right -HandPeninsula
Wall AngleCabinet
PeninsulaWall
Cabinet
Wall Cabinets
D13Wall End Run Cabinets
Wall End Run Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - All Plywood Construction BIS - - - - Bistro Glass MD - - - - Traditional Mullion Glass SV - - - - - Savannah Mullion Glass MI - - - - - Matching Interior CFO - - - Cabinet Front Only
WCA 12 30code width height
Wall Corner Angle
Specify R or L Two shelves
WCA1230 R or L Three shelves
WCA1236 R or L
WCA1239 R or L
WCA1242 R or L
• Adjustable shelves • For use at end of cabinet run or in a corner I Bistro Glass (BIS), Savannah Mullion (SV)
and Traditional Mullion (MD) glass doors with or without Matching Interior (MI) are available on select door styles. See Construction Options for specifics
PE
l APC
I BIS
I MD
I SV
I MI
l CFO
12˝
12˝
45°
30˝36˝39˝42˝
12˝ 12˝
Wall End Corner
Two shelves
WEC1230 Three shelves
WEC1236
WEC1239
WEC1242
• Adjustable shelves • Two doors • Can be installed on either right or left end
of run or in a corner
PE
l APC
BIS
MD
SV
MI
l CFO
12"
8 /˝
8 /˝12"143°
63½°
11 /˝
30˝36˝39˝42˝
Solid Wood Wall End Open Shelf
Three shelves
SWEOS30 Four shelves
SWEOS36
SWEOS42
• Solid wood shelves and top • 5/8” thick fixed shelves and top • 30” high has three shelves with equal
spacing of 9 1/8” high • 36” high has four shelves with equal
spacing of 8 3/16” high • 42” high has four shelves with equal spacing of
9 11/16” high • Invertible for right or left hand use • Trimmable to 5 7/8” wide • Back not finished • End and back panels are 3/16” with veneered
plywood finish on exposed surfaces
PE
APC
BIS
MD
SV
MI
CFO
30˝36˝42˝
6 /˝ 12 ˝
6 /˝5 ¾˝
12 ˝
Wal
l Cab
inet
s
D14 Wall Open CabinetsCaution! Installation of a wall cabinet 30” or wider requires additional support, such as attachment to
a soffit, or support from below.
Wall Open Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Installation notes: Installation of a wall cabinet 30” or wider, by itself, is not recommended and requires additional support, such as attachment to a soffit or support from below.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - -Plywood Ends APC - - - -All Plywood Construction RD9 - - - - -Reduce Depth 9” ID15 - - - -Increase Depth 15” ID18 - - - -Increase Depth 18” ID21 - - - -Increase Depth 21” ID24 - - - -Increase Depth 24”
WOC 15 30code width height
Wall Open Cabinet
No shelf 12” High
WOC3012
WOC3612 One shelf
23 1/2” H
WOC1524
WOC1824
WOC2124
WOC2424 Two shelves
30” High
WOC1530
WOC1830
WOC2130
WOC2430 Three shelves
36” High
WOC1536
WOC1836
WOC2136
WOC2436 39” High
WOC1539
WOC1839
WOC2139
WOC2439 42” High
WOC1542
WOC1842
WOC2142
WOC2442 48” High
WOC1848
WOC2148
WOC2448
Three adjustable shelves, one fixed shelf 54” High
WOC1854
WOC2154
WOC2454 60” High
WOC1860
WOC2160
WOC2460
• Adjustable shelves • No door • Matching laminate interior and
shelves • Includes low profile clear
polycarbonate shelf supports in addition to hold -down style supports used for shipping
• 54” and 60” high are designed for countertop mount
Additional support is required. Wall hung applications must be limited
to 15 lbs. per square foot of shelf area; not to exceed 50 lbs. per shelf.
v PE
l APC
l RD9
l ID15
l ID18
l ID21
l ID24
12˝
12˝23 ½˝
30˝36˝39˝42˝48˝
54˝60˝
12˝
18˝
WOC15-WOC24Shown with two adjustable shelves
WOC18-WOC24Shown with three adjustable shelves, one fixed shelf
Wall Cabinets
D15Wall Open CabinetsCaution! Installation of a wall cabinet 30” or wider requires additional support, such as attachment to
a soffit, or support from below.
Wall China Display 12” Deep 15” H
WCD3015 13 Plates
WCD3615 16 Plates
• Each plate opening is 1 5/8” wide x 11 1/4” deep x 11 1/2” high
• Matching laminate interior • Plate spindles finished to match • Plate spindles are not removable • Vertical wood grain back panel; except for
painted door styles
l PE
l APC
RD9
ID15
ID18
ID21
ID24
15˝
12˝ 30˝, 36˝
Lattice Wall
30” High
LW1530 11 Bottles 15” High
LW3015 11 Bottles
• 4” x 4” bottle openings • Matching laminate interior • Lattice finished to match • Lattice is not removable • Vertical wood grain back panel; except for
painted door styles
l PE
l APC
RD9
ID15
ID18
ID21
ID24
30˝
12˝
12˝
30˝
15˝
15˝
LW3015
LW1530
Wall Wine Rack Scalloped
15” High
WWRS3015 14 Bottles
WWRS3615 16 Bottles 18” High
WWRS3018 14 Bottles
WWRS3618 16 Bottles 30” High
WWRS1530 12 Bottles
WWRS1830 16 Bottles
WWRS2430 20 Bottles
• Scalloped rails are 3/4” wide x 1 5/8” solid wood
• Matching laminate interior • Shelves and cabinet bottom are finished to
match cabinet exterior • Scalloped rails finished to match • Shelves are not removable • Bottle scallops are on 4” centers • Vertical wood grain back panel; except for
painted door styles • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
RD9
ID15
ID18
ID21
ID24
15˝18˝
12˝
30˝
12˝
WWRS3018
WWRS1830
Wal
l Cab
inet
s
D16 Wall Microwave CabinetsCaution: Additional support is required.
Wall Microwave Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Installation notes: Installation of a wall cabinet 30” or wider, by itself, is not recommended and requires additional support, such as attachment to a soffit or support from below.
Any wall cabinet over 24” wide or 30” high with a depth greater than 12” or butt doors must be installed between two cabinets, a cabinet and a wall, or supported from below.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - -Plywood Ends APC - - - - -All Plywood Construction ID21 - - - -Increase Depth 21” ID24 - - - -Increase Depth 24” CFO - - - - -Cabinet Front Only
WMC 30 18 36code width depth height
Wall Microwave Cabinet 36” H
WMC271836 (Butt)
WMC301836 BUTT
• No shelf in upper section • BUTT doors without a frame center stile • Matching laminate interior • 4 1/2” wide trimmable face frame stiles • Doors are attached with face -mounted
concealed hinges • Designed for “built -in” style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
Installation of a wall cabinet 30” or wider, by itself, is not recommended and requires additional support,
such as attachment to a soffit or support from below
Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word BUTT in all
capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn’t required on an order form.
l PE
l APC
l ID21
l ID24
l CFO
Cabinet Opening Size Trimmable to
WMC271836
WMC301836
13˝ high x 18˝ wide
13˝ high x 21˝ wide
19 ½˝ high x 24˝ wide
19 ½˝ high x 27˝ wide
15˝
36˝
18˝
Wall Microwave Cabinet 45” H
WMC271845 (Butt)
WMC301845 BUTT • No shelf in upper section • BUTT doors w thout a frame center stile • Matching laminate interior • 4 1/2” wide trimmable face frame stiles • Doors are attached with face -mounted
concealed hinges • Designed for “built -in” style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
l ID21
l ID24
l CFO
Cabinet Opening Size Trimmable to
WMC271845 13½˝ high x 18˝ wide 20˝ high x 24˝ wide
WMC301845 13½˝ high x 21˝ wide 20˝ high x 27˝ wide
23 ½˝
45˝
18˝
Wall Cabinets
D17Wall Microwave CabinetsCaution: Additional support is required.
Wall Microwave Shelf Cabinet
30” High
WMSC271230 (Butt) 36” High
WMSC241236 (Butt)
WMSC271236 (Butt) 42” High
WMSC271242 (Butt)
• 3/4” thick shelf extends 6 25/32” beyond face frame
• No shelf in upper section • BUTT doors w thout a frame center stile • Shelf shipped unattached for easier
installation; mounting hardware included • Matching laminate interior • Designed for countertop style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
ID21
ID24
l CFO
Opening SizesCabinet
WMSC241236
WMSC271230
WMSC271236
18 ¾˝ high x 21˝ wide x 18˝ deep (shelf)
15 ¾˝ high x 24˝ wide x 18˝ deep (shelf)
18 ¾˝ high x 24˝ wide x 18˝ deep (shelf)
21 ¾˝ high x 24˝ wide x 18˝ deep (shelf)WMSC271242
12˝
18˝
30˝36˝42˝
12˝15˝18˝
Wall Microwave Shelf
12” Deep
WMS271218
WMS301218 15” Deep
WMS271518
WMS301518
• Shelf extends 3 25/32” beyond face frame of cabinet
• Shelf shipped unattached for easier installation; mounting hardware included
• Matching laminate interior • Designed for countertop style microwaves • Note: Must be installed between two cabinets
or between cabinet and side wall
l PE
l APC
ID21
ID24
CFO
Opening SizesCabinet
WMS271218
WMS301218
WMS271518
24˝ wide x14 ¼˝ high x 15˝ deep
27˝ wide x14 ¼˝ high x 15˝ deep
24˝ wide x14 ¼˝ high x 18˝ deep
27˝ wide x14 ¼˝ high x 18˝ deepWMS301518
12˝, 15˝
18˝
Wal
l Cab
inet
s
D18 Wall Hoods
Wall Hoods Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Consult your local building code for rules and regulations that may apply to the installation of this product.
Specifications subject to change without notice.
APC - - All Plywood Construction
WHCC 36 24 42code width depth height
Wall Hood Front
RHF3024SP
RHF3624SP
• Decorative slanted range hood with batten strips
• For installations with exterior ductwork • Hood extends 7 1/4” from face frame of
adjacent wall cabinets, 19 1/4” from wall • Galley rail included, shipped unattached • Almond colored painted metal liner included • Wall Hood Front Blower (RHB) required;
ordered separately • Note: Must be installed between two cabinets
or between cabinet and side wall
Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to
installation. Hood must be securely anchored to wall
v APC
23 ½˝
30˝ or 36˝
Wall Hood Classic Chimney
WHCC362442P • Solid wood/wood veneer construction • For installations with exterior ductwork • A 3” space is recommended on both sides of
hood for adjacent cabinet runs • Can accommodate ceilings up to 9’ high with
installation of the chimney or 8’ without the chimney
• Not designed to be used with a soffit • 12” tall chimney is shipped unattached for
easier installation • Requires a metal liner and blower. See Wall
Hood Liner (WHL36) and Wall Hood Blower (WHB36)
• Note: Cabinetry and appliances located below these Wall Hoods must be pulled to a minimum of 27˝deep and a maximum of 30˝ deep for improved function
Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to
installation. Hood must be securely anchored to wall
v APC
21˝38 ¾˝
12 ½˝
12˝
17 ½˝42˝
20˝11 ¾˝
Wall Cabinets
D19Wall Hoods
Wall Hood Cove
WHCV362442
• Solid wood/wood veneer construction • For installations with exterior ductwork • A 3” space is recommended on both sides of
hood for adjacent cabinet runs • Can accommodate ceilings up to 9’ high • Not designed to be used with a soffit • Requires a metal liner and blower. See Wall
Hood Liner (WHL36) and Wall Hood Blower (WHB36 -620)
• Note: Cabinetry and appliances located below these Wall Hoods must be pulled to a minimum of 27˝deep and a maximum of 30˝ deep for improved function
Mount hood a minimum of 24” above range cooking surface. Consult building codes prior to
installation. Hood must be securely anchored to wall
v APC
21˝38˝
35 ½˝ 12˝
42˝
12˝ 20˝
Wall Hood Front Blower
RHB
• Double squirrel cage blower unit (360 CFM maximum) with a solid state, variable speed control, on/off switch, and two 40 watt tubular light fixtures with lens diffuser and dimming switch. Tubular bulbs not included
• For installations with exterior ductwork • 3 1/4” x 10” top exhaust with built -in back
draft damper unit; duct not included • Pre -wired for electrical connection • AC 120 volt required • Charcoal filter laminated within replaceable
grease filter • Washable aluminum mesh grease filter
included • UL and CSA approved • For use with Wall Hood Front (RHF) • Almond colored painted finish
APC
Wall Hood Blower
WHB36•620 • 620 CFM/7.5 Sones; three -speed motor with push button electronic control
• For installations with exterior ductwork • Constructed of heavy gauge steel • Pre -wired for electrical connection • AC 120 volt required • 8” diameter duct vents on top • Dual bulb halogen lighting (PAR 20) included • UL and HVI approved • For use with Wall Hood Cove (WHCV) and
Wall Hood Classic Chimney (WHCC) • For use with Wall Hood Liner (WHL) • Metallic medium gray painted finish on
cover plate is corrosion and rust resistant. Blowerbox has galvanized finish
APC
8" diameter
10 ½˝
11 ½˝
17 /˝
12" 21 /˝
Wall Hood Liner
WHL36 • Constructed of heavy gauge steel • For installations with exterior ductwork • For use with Wall Hood Cove (WHCV) and
Wall Hood Classic Chimney (WHCC) • For use with Wall Hood Blower (WHB) • Metallic medium gray painted finish on cover
plate is corrosion and rust resistant
APC
34 /˝18 /˝
4˝
11 ¼˝
17 /˝
Wal
l Cab
inet
s
D20 Wall Specialty Cabinets
Wall Specialty Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - Plywood Ends APC - - - All Plywood Construction
TSA 24 18code width height
Tambour Storage
TS18
TS24
TS30
• Provides countertop out -of -sight storage for small appliances
• Designed to set back 1/4” from wall cabinet frame for easier installation
• Fits under 18”, 24”, and 30” wide wall cabinets • Features a torsion spring activated roll -up tambour door • “No back” design allows easy access to electrical outlets
and notching for backsplash • Bottom edges may be trimmed a maximum of 1” before
interfering with tambour track stop. Width cannot be trimmed
• End panels are 1/2” thick and have matching exterior surface. End panels shipped unattached
• Matching laminate interior • Holes for knobs are pre -drilled. One antique brass knob is
included with TS18 and TS24; two with TS30 • Installation instructions and mounting hardware included
PE
APC
18 ¼˝
Tambour Storage Angle
TSA2418
TSA2718
• Provides countertop out -of -sight storage for small appliances
• Designed to set back 1/4” from wall angle cabinet frame for easier installation
• TSA24 for use under Wall Angle (WA24); TSA27 for use under Wall Angle (WA27)
• Features a torsion spring activated roll -up tambour door • “No back” design allows easy access to electrical outlets
and notching for backsplash • Bottom edges may be trimmed a maximum of 1” before
interfering with tambour track stop • End panels are 1/2” thick and have matching exterior
surface. End panels shipped unattached • Matching laminate interior • Hole for knob is pre -drilled and one antique brass knob
included • Installation instructions and mounting hardware included • Installation Note: Requires field fabricated back on one
side when used with PWA
PE
APC
18 ¼˝
Spice Drawer Cabinet
SDC18 3 drawers
SDC24 4 drawers
SDC30 5 drawers
SDC36 6 drawers
• Solid half blind, 1/2” thick, dovetail drawers • Drawer fronts are solid wood • Matching wood veneer interior and exterior surfaces • Includes a matching solid wood strip at each end to align
with cabinet when installed horizontally • Interior drawer is 10” deep, 4 1/8” wide and 4 7/16” tall • Units may be stacked horizontally or mounted vertically • Decorative hardware may be required
PE
APC
6˝
12˝
Reveals
5½˝
5½˝ 5½˝½˝ /˝ /˝
¼˝
¼˝
SDC30
Wall Cabinets
D21Wall Specialty Cabinets
Door Storage
Specify R or L
DOS18 R or L
DOS24 BUTT
• Provides countertop out -of -sight storage for small appliances
• Designed to be flush mounted with 12” deep wall cabinets
• Frame and end panels oversized for custom fit • End panels are shipped unattached • “No back” design allows easy access to
electrical outlets and notching for backsplash
l PE
l APC
18 /˝
18 /˝
12˝
12˝
DOS18
DOS24 BUTT
Wall Filler Pull-out
WFP3.30
2 3/4” shelf width; 1 3/4” usable space between chrome rails; 3 1/16” required between adjacent cabinets
WFP6.30
5 3/4” shelf width; 4 3/4” usable space between chrome rails; 6 1/16” required between adjacent cabinets
• Three adjustable natural finished hardwood shelves
• 3/4” thick solid wood pre -drilled filler included, shipped unattached
• Wood filler aligns with face frames of adjacent wall cabinets
• Unit slides on full extension runners; one on the top and two at the bottom
• Must be installed between two cabinets that are at least 30” high and 12” deep
• Natural finish hardwood interior
Do not use filler pullouts at the end of cabinet runs or next to appliances. They must be installed
between two cabinets or a cabinet and an end panel
PE
APC
30˝
12˝ 3˝, 6˝
Wal
l Cab
inet
s
D22 Wall Accessories
Wall Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
WFOL 3 •12code width height
Under Cabinet Shelf
UCS36 • Solid wood ends and wood veneered shelf • 4 3/4” deep shelves with groove for displaying
plates up to 6 1/8” diameter • For use under 36” wide wall cabinets • Back and top panels included for strength and
ease of installation • Ends can be removed so that the assembly can
be cut down in 3” increments to only 12” wide for narrower cabinet applications
• Shipped assembled
v C
v M
v O
8 ¼”
9 ¾”
Under Cabinet Shelf Corner
UCSC2424 • Solid wood ends and wood veneered shelves
• 4 3/4” deep shelves with groove for displaying plates up to 6 1/8” diameter
• Extends 24” from corner in both directions • Fits under WA24 and WEZR24 • Back and top panels included for strength and
ease of installation • Shipped assembled
v C
v M
v O
8 ¼”
9 ¾”
1 Shelf Lazy Susan Kit
LS18.1 • One 18” diameter wide impact white plastic shelf
• Distance from top of shelf rim to top of cabinet surface is 2 7/8”
• Attaches to cabinet shelf or bottom, 1 1/2” clearance gap between bottom of shelf and cabinet shelf or bottom
• Installation instructions and mounting hardware included
• Fits 30”, 36”, 39” and 42” high Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets
C
M
O
18˝
2 /˝
Top of cabinet f loor
Shelf rim
Wall Cabinets
D23Wall Accessories
3 Shelf Lazy Susan Kit
LS18.3 • Three 18” diameter wide impact white plastic shelves that rotate together
• Fits 24” wide Wall Angle (WA) and Peninsula Wall Angle (PWA) cabinets
• Replaces adjustable shelves shipped with cabinet
• Includes center post and installation hardware • Adjust 22” to 33” in height
C
M
O
18˝
Stem Glass Holder
SGH30 6 sections
SGH36 8 sections
• Solid wood • Fits under standard 12” deep wall cabinet • Rack may be cut down for narrower cabinet
application • Installation instructions and mounting
hardware included
v C
v M
v O
1 /˝
Open Cube Organizer
OCO18 3 compartments
OCO24 4 compartments
OCO30 5 compartments
OCO36 6 compartments
• Units may be stacked horizontally or mounted vertically
• 5 1/4” x 5 1/4” square compartments • Matching wood veneer interior and exterior
surfaces • Includes a matching solid wood strip at each
end to align with cabinet when installed horizontally
• Note: This cabinet features “frameless” type construction
When using an Organizer (O—) Cabinet under a wall cabinet at the end of a run, order Wood Veneer
Paneling (WSK) for the wall cabinet to flush the ends. (There will be a seam)
v C
v M
v O
6˝
12˝
Wal
l Cab
inet
s
D24 Wall Accessories
Door Spice Rack
DSR12 8” Wide
DSR15 11” Wide
DSR18 14” Wide
• Solid wood rack with natural finish • Installs on backside of cabinet door • Installation instructions and mounting
hardware included • Not available on Ambridge or Bellwether door
styles • Not for use on any BUTT door cabinets,
except Flaxton • For Fox Pointe door style, the rack installs
onto the backside of the door center panel. DSR12 installs on 15” and 30” wide cabinets. DSR15 installs on 18” and 36” wide cabinets. DSR18 installs on 21” and 42” wide cabinets
C
M
O
3˝
4 ¾˝8˝, 11˝, 14˝
Wall Filler
30” High
WF1•30
WF2•30
WF3•30
WF6•30 36” High
WF3•36
WF6•36 39” High
WF3•39
WF6•39
42” High
WF3•42
WF6•42 30” High
WF3X3•30 42” High
WF3X3•42
• 3/4” thick solid wood • Backside of filler not finished
v C
v M
v O
1" 2" 3" 3" 3"6"
30"42"
30"36"39"42"
30"
WF WF WF3X3
Wall Filler Overlay
3” Wide
WFOL3•12
WFOL3•15
WFOL3•18
WFOL3•21
WFOL3•24
WFOL3•27
WFOL3•30
WFOL3•36
WFOL3•39
WFOL3•42
6” Wide
WFOL6•21
WFOL6•24
WFOL6•30
WFOL6•36
WFOL6•39
WFOL6•42
• Attaches to 3” or 6” wide filler, not included. Order separately
• 3/4” thick with matching profile on all four edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included • Available for all full overlay door styles except
Flaxton
v C
v M
v O
2 /˝5 /˝
11 ¼˝14 ¼˝17 ¼˝19 ¾˝22 ¾˝26 ¼˝29 ¼˝35 ¼˝38 ¼˝41 ¼˝
Wall Fluted Filler
WFF3•12
WFF3•15
WFF3•18
WFF3•24
WFF3•30
WFF3•36
WFF3•39
WFF3•42
• 3/4” thick solid wood • Four flutes • Backside of filler not finished
v C
v M
v O
1 1/˝
3˝
¾˝
1 1/˝
12˝15˝18˝23 1/˝30˝36˝39˝42˝
3˝
¾˝
/˝
Wall Cabinets
D25Wall Accessories
Filler Extension
FE3 •30
FE3 •42
FE3 •60
• 3/4” thick solid wood • Fills 3” space between cabinets that are offset
3” • For right or left hand use • Backside of filler not finished
v C
v M
v O
3˝¾˝
30˝42˝60˝
3˝
3˝
Filler ExtensionApplicationFiller Extension
Fluted Filler Extension
FFE3 •30
FFE3 •36
FFE3 •39
FFE3 •42
• 3/4” thick solid wood • Five flutes • Fills 3” space between cabinets that are offset
3” • For right or left hand use • Backside of filler not finished
v C
v M
v O
¾˝
30˝36˝39˝42˝
1 1/˝
1 1/˝
Filler ExtensionApplicationFiller Extension
3˝
3˝
Wall Box
30” High
WB3 •30
WB6 •30 42” High
WB3 •42
WB6 •42
• Front is 3/4˝ solid wood • End panels recessed 1/4” • Finished front and both sides • Vertical wood grain • May be used on either right or left end • Available with Plywood Ends (PE) • Not available with All Plywood Construction
(APC)
v C
v M
v O
12˝
3˝, 6˝30˝42˝
¾˝¼˝
Wall Fluted Column
WFC61530
WFC61536
WFC61542
• Fluted front is 3/4” solid wood • Six flutes • Finished front and sides • Flush end panels • Vertical wood grain • May be used on either right or left end • Available with Plywood Ends (PE) • Not available with All Plywood Construction
(APC)
v C
v M
v O
15˝ 6˝
30˝36˝42˝
1 ½˝
1 ½˝
¾˝
Wal
l Cab
inet
s
D26 Wall Accessories
Matching Wall End Panel
MWEP1230
MWEP1236
MWEP1239
MWEP1242
• Provides a finished furniture look to 12” deep wall cabinet ends
• 3/16” thick base panel with matching decorative door
• Full overlay door styles shipped unattached to panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partial overlay door styles; door shipped attached to panel
• For right or left hand use • Field installation only
v C
v M
v O
Item
MWEP1230
MWEP1236
MWEP1239
MWEP1242
11 ¼˝
11 ¼˝
11 ¼˝
11 ¼˝
Width
30˝
36˝
39˝
42˝
Height
29 ¼˝
35 ¼˝
38 ¼˝
41 ¼˝
Height
11 /˝
11 /˝
11 /˝
11 /˝
Width
28˝
34˝
37˝
40˝
Height
10 ¼˝
10 ¼˝
10 ¼˝
10 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
Grain Direction
30˝36˝39˝42˝
Base Cabinets
E1Base Cabinets
Base Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Note: Standard base cabinet box depth is 24” unless stated otherwise. Add door thickness with bumpers for total depth.
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - - - Plywood Ends APC - - - - - - All Plywood Construction RD12 - - - - - - Reduce Depth 12” RD15 - - - - - - Reduce Depth 15” RD18 - - - - - - Reduce Depth 18” RD21 - - - - - - Reduce Depth 21” 1ROT - - - - - 1 Roll -out Tray 2ROT - - - - - 2 Roll -out Trays 3ROT - - - - - 3 Roll -out Trays 4ROT - - - - - 4 Roll -out Trays 6ROT - - - - - 6 Roll -out Trays 1FWROT - - - 1 Full Width Tray 2FWROT - - - 2 Full Width Trays 2DROT - - - - 2 Deep Roll -out Trays 4DROT - - - - 4 Deep Roll -out Trays 6DROT - - - - 6 Deep Roll -out Trays 2DFWROT - - 2 Deep Full Width Roll -out Trays CFO - - - - - - Cabinet Front Only
B 15 12 R •FHcode width depth hinge suffix
Base Single Door
Specify R or L
B12 R or L
B15 R or L
B18 R or L
B21 R or L
B24 R or L
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) are not available with reduced depth options
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
I 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
I 2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
Base Double Door
One drawer
n B24 BUTT
n B27 (Butt)
n B30 BUTT
n B33 BUTT
n B36 BUTT
u B39
Two drawers
u B42
u B45
u B48
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
• Note: When depth is reduced to 12” or 15”, drawers become a false front
Remember, a cabinet designated BUTT or (Butt) has no center stile. When you see the word
BUTT in all capitals, it must be included as part of your ordering nomenclature, a (Butt) in parentheses is for your information and isn’t required on an order form
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
I 2ROT
3ROT
I 4ROT
6ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
6DROT
I 2DFWROT
l CFO
34 ½˝
24˝
34 ½˝
24˝
B24B-B39
B42-B48
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
Base
Cab
inet
s
E2 Base Cabinets
Base Three Door
B54 • Three drawers • Three equal sized doors; center door
hinged right • One adjustable shelf • 3 3/16” wide full -width support cross rail
across top front of cabinet • Note: When depth is reduced to 12” or 15”,
drawers become a false front I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
I 3ROT
4ROT
I 6ROT
1FWROT
2FWROT
2DROT
4DROT
I 6DROT
2DFWROT
l CFO
34 ½˝
24˝18˝
18˝18˝
Base Single Door w/Two Full-Width Trays
Specify R or L
B12 R or L•2FWT
B15 R or L•2FWT
B18 R or L•2FWT
B21 R or L•2FWT
B24 R or L•2FWT
• One drawer • Two Full -width Roll -out Trays (FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Single Door w/Two Deep Full-Width Trays
Specify R or L
B12 R or L•2DFWT
B15 R or L•2DFWT
B18 R or L•2DFWT
B21 R or L•2DFWT
B24 R or L•2DFWT
• One drawer • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Two Full-Width Trays
B24 BUTT•2FWT
B27 (Butt)•2FWT
B30 BUTT•2FWT
B33 BUTT•2FWT
B36 BUTT•2FWT
• One full -width drawer • Two Full -width Roll -out Trays (FWROT)
Remember, when designing a space for storing heavy items, avoid using 30 -36” wide roll -out
trays. These units are not designed for extremely heavy loads
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Cabinets
E3Base Cabinets
Base Double Door w/Two Deep Full-Width Trays
B24 BUTT•2DFWT
B27 (Butt)•2DFWT
B30 BUTT•2DFWT
B33 BUTT•2DFWT
B36 BUTT•2DFWT
• One full -width drawer • Two Deep Full -width Roll -out Trays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Two Full-Width Trays – Full Extension
B30 BUTT•2FWTFX
B36 BUTT•2FWTFX • One full -width drawer • Two Full -width Roll -out Trays (FWROT)
with full extension, ball bearing runners
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Two Deep Full-Width Trays – Full Extension
B30 BUTT•2DFWTFX
B36 BUTT•2DFWTFX • One full -width drawer • Two Deep Full -width Roll -out Trays
(DFWROT) with full extension, ball bearing runners
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Double Door w/Four Trays
One Drawer
B39 •4T Two Drawers
B42 •4T
B45 •4T
B48 •4T
• Four standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
B39
34 ½˝
24˝
34 ½˝
24˝ B42-B48
Base
Cab
inet
s
E4 Base Cabinets
Base Double Door w/Four Deep Trays
One Drawer
B39 •4DT Two Drawers
B42 •4DT
B45 •4DT
B48 •4DT
• Four Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
B39
B42-B48
34 ½˝
24˝
Base Three Door w/Six Trays
B54 •6T • Three drawers • Six standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Three Door w/Six Deep Trays
B54 •6DT • Three drawers • Six Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Base Full-Height Single Door
Specify R or L No Shelf
u B9 R or L•FH One Shelf
B12 R or L•FH
B15 R or L•FH
B18 R or L•FH
B21 R or L•FH
B24 R or L•FH
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
I 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
I 2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝ u Roll -out Trays (ROT) and Deep Roll -out Trays (DROT) are not available
Base Cabinets
E5Base Cabinets
Base Full-Height Double Door
n B24 BUTT•FH
n B27 (Butt)•FH
n B30 BUTT•FH
n B33 BUTT•FH
n B36 BUTT•FH
u B39 •FH
u B42 •FH
u B45 •FH
u B48 •FH
• One adjustable shelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
I 2ROT
3ROT
I 4ROT
6ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
6DROT
I 2DFWROT
l CFO
34 ½˝
24˝
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
Base Full-Height Single Door 12” Deep
Specify R or L
B1212 R or L•FH
B1512 R or L•FH
B1812 R or L•FH
B2112 R or L•FH
B2412 R or L•FH
• Two adjustable shelves
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
12˝
Base Full-Height Double Door 12” Deep
B2412 BUTT•FH
B2712 (Butt)•FH
B3012 BUTT•FH
• Two adjustable shelves
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
12˝
Base Full-Height Single Door w/Two Full-Width Trays
Specify R or L
B12 R or L•FH•2FWT
B15 R or L•FH•2FWT
B18 R or L•FH•2FWT
B21 R or L•FH•2FWT
B24 R or L•FH•2FWT
• Two Full -width Roll -out Trays (FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
1234 / ˝
Base
Cab
inet
s
E6 Base Cabinets
Base Full-Height Double Door w/Two Full-Width Trays
B24 BUTT•FH•2FWT
B27 (Butt)•FH•2FWT
B30 BUTT•FH•2FWT
B33 BUTT•FH•2FWT
B36 BUTT•FH•2FWT
• Two standard Full -width Roll -out Trays (FWROT)
Remember, when designing a space for storing heavy items, avoid using 30 -36” wide roll -out
trays. These units are not designed for extremely heavy loads
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Full-Height Single Door w/Two Deep Full-Width Trays
Specify R or L
B12 R or L•FH•2DFWT
B15 R or L•FH•2DFWT
B18 R or L•FH•2DFWT
B21 R or L•FH•2DFWT
B24 R or L•FH•2DFWT
• Two Deep Full -width Roll -out Trays (DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Full-Height Double Door w/Two Deep Full-Width Trays
B24 BUTT•FH•2DFWT
B27 (Butt)•FH•2DFWT
B30 BUTT•FH•2DFWT
B33 BUTT•FH•2DFWT
B36 BUTT•FH•2DFWT
• Two Deep Full -width Roll -out Trays (DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Full-Height Double Door w/Four Trays
B39 •FH•4T
B42 •FH•4T
B45 •FH•4T
B48 •FH•4T
• Four standard Roll -out Trays (ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Base Cabinets
E7Base Cabinets
Base Full-Height Double Door w/Four Deep Trays
B39 •FH•4DT
B42 •FH•4DT
B45 •FH•4DT
B48 •FH•4DT
• Four Deep Roll -out Trays (DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 1/2̋
Peninsula Base Single Door
PB18
PB21
PB24
• Peninsula side has false drawer front • Cabinet door is hinged left on the kitchen
side and hinged right on the peninsula side. Base cabinet doors are fully reversible if opposite hinging is desired
l PE
l APC
RD12
RD15
RD18
RD21
l 1ROT
l 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
l 2DROT
4DROT
6DROT
2DFWROT
CFO
Kitchen side
Peninsula side
34 ½˝
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Peninsula Base Single Door w/Two Full-Width Trays
PB18•2FWT
PB21•2FWT
PB242FWT
• Peninsula side has false drawer front • Door hinged left on the kitchen side • Two Full -width Roll -out Trays (FWROT)
extend on kitchen side
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Peninsula Base Single Door w/Two Deep Full-Width Trays
PB18•2DFWT
PB21•2DFWT
PB24•2DFWT
• Peninsula side has false drawer front • Door hinged left on the kitchen side • Two Deep Full -width Roll -out Trays
(DFWROT) extend on kitchen side
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Base
Cab
inet
s
E8 Base Cabinets
Peninsula Base Double Door
PB24 BUTT
PB27 (Butt)
PB30 BUTT
PB36 BUTT
• One adjustable shelf • Peninsula side has false drawer front
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
l 1FWROT
l 2FWROT
2DROT
4DROT
6DROT
l 2DFWROT
CFO
Kitchen side
Peninsula side
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Peninsula Base Double Door w/Two Full-Width Trays
PB24 BUTT•2FWT
PB27 (Butt)•2FWT
PB30 BUTT•2FWT
PB36 BUTT•2FWT
• Peninsula side has false drawer front • Two Full -width Roll -out Trays (FWROT)
extend on kitchen side
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
Kitchen side
Peninsula side
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Peninsula Base Double Door w/Two Deep Full-Width Trays
PB24 BUTT•2DFWT
PB27 (Butt)•2DFWT
PB30 BUTT•2DFWT
PB36 BUTT•2DFWT
• Peninsula side has false drawer front • Two Deep Full -width Roll -out Trays
(DFWROT) extend on kitchen side
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Kitchen side
Peninsula side
24 /˝(excluding doors
and drawer)
Kitchen side
Peninsula side
Base Combination Drawer (4)
Specify DR or DL
BCD24 DR or DL•4D
BCD30 DR or DL•4D
BCD36 DR or DL•4D
• Three standard height drawers; top drawer is full -width
• One deep drawer • One adjustable shelf • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers I Deep Roll -out Trays (DROT) are not
available with reduced depth options
l PE
l APC
RD12
RD15
l RD18
l RD21
l 1ROT
l 2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
I 2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
Base Cabinets
E9Base Cabinets
Base Combination Drawer (4) w/Two Full-Width Trays
Specify DR or DL
BCD24 DR or DL•4D•2FWT
BCD30 DR or DL•4D•2FWT
BCD36 DR or DL•4D•2FWT
• Three standard height drawers; top drawer is full -width
• One deep drawer • Two Full -width Roll -out Trays (FWROT) • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 ½˝
Base Combination Drawer (4) w/Two Deep Full-Width Trays
Specify DR or DL
BCD24 DR or DL•4D•2DFWT
BCD30 DR or DL•4D•2DFWT
BCD36 DR or DL•4D•2DFWT
• Three standard height drawers; top drawer is full -width
• One deep drawer • Two Deep Full -width Roll -out Trays
(DFWROT) • Specify DL (Drawer Left) or DR (Drawer
Right) position for drawers
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
24˝
34 ½˝
Base Pots and Pans Storage Two Drawer
BPPS27 •2
BPPS30 •2
BPPS33 •2
BPPS36 •2
• Two solid wood deep drawers • Heavy duty full extension undermount
guides • 3 3/16” wide full -width support cross rail
across top front of cabinet • Drawer interior height is 9 1/4”
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
Base Three Drawer
BD12 •3
BD15 •3
BD18 •3
BD21 •3
BD24 •3
BD27 •3
BD30 •3
BD33 •3
BD36 •3
• One standard height drawer • Two deep drawers • Full extension slides on bottom drawers
on BD30•3, BD33•3 and BD36•3
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
Base
Cab
inet
s
E10 Base Cabinets
Base Four Drawer
BD12
BD15
BD18
BD21
BD24
BD27
• Three standard height drawers • One deep drawer
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
24˝
34 ½˝
CoreGuard® Sink Base
SB30 BUTT•CG
SB33 BUTT•CG
SB36 BUTT•CG
• No shelf • Easy to clean and durable sink base helps
protect the cabinetry from everyday leaks and spills
• Back, end and bottom panels are made of an engineered polymer material
• Bottom panel slants 1º toward front of cabinet and has raised ribs to slightly elevate stored items
• Decorative end panel required for end of peninsula or island
• One full -width false drawer front above doors
• Use CoreGuard® Panel Backer in the paneling section to resolve cutting and installation errors
Caution: For an island/peninsula installation, the CoreGuard® Sink cabinet must have a minimum of
one (1) 15” cabinet or larger installed adjacent to it in order for the island/peninsula to have adequate structural stability. Accessories cannot be installed on end panels, back or floor of the cabinet
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Opening Sizes
Cabinet Top Width Top Depth
SB30BUTT-CG 27 ⁄˝ 22 ⅜ ˝
SB33BUTT-CG 30 ⁄˝ 22 ⅜ ˝
SB36BUTT-GC 33 ⁄˝ 22 ⅜ ˝
Base Cabinets
E11Base Cabinets
CoreGuard® Sink Base w/Utensil Tray
SB30 BUTT•CG•UT
SB33 BUTT•CG•UT
SB36 BUTT•CG•UT
• No shelf • Easy to clean and durable sink base helps
protect the cabinetry from everyday leaks and spills
• Removable high -impact, tilt down, white plastic storage tray installed on backside of drawer front
• Hinge detent holds drawer front in full open position
• Back, end and bottom panels are made of an engineered polymer material
• Bottom panel slants 1º toward front of cabinet and has raised ribs to slightly elevate stored items
• Decorative end panel required for end of peninsula or island
• Use CoreGuard® Panel Backer in the paneling section to resolve cutting and installation errors
Caution: For an island/peninsula installation, the CoreGuard® Sink cabinet must have a minimum of
one (1) 15” cabinet or larger installed adjacent to it in order for the island/peninsula to have adequate structural stability. Accessories cannot be installed on end panels, back or floor of the cabinet
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Opening Sizes
Cabinet Top Width Top Depth
SB30BUTT•CG•UT 27 ⁄˝ 22 ⅜ ˝
SB33BUTT•CG•UT 30 ⁄˝ 22 ⅜ ˝
SB36BUTT•CG•UT 33 ⁄˝ 22 ⅜ ˝
Wood Sink Base
• No shelf • False drawer front(s)
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
34 ½˝
24˝
SB12-SB24
SB24B-SB39
SB42-SB48
34 ½˝
24˝
Specify R or L Single Door One Drawer
SB12 R or L•W
SB15 R or L•W
SB18 R or L•W
SB21 R or L•W
SB24 R or L•W Double Door One Drawer
SB24 BUTT•W
SB27 (Butt)•W
SB30 BUTT•W
SB33 BUTT•W
SB36 BUTT•W
SB39 •W
Double Door Two Drawers
SB42 •W
SB48 •W
Base
Cab
inet
s
E12 Base Cabinets
Wood Sink Base w/Utensil Tray
• No shelf • Removable high -impact, tilt down, white
plastic storage tray installed on backside of drawer front
• Hinge detent holds drawer front in full open position
• Concealed self -closing hinges allow drawer front to tilt down 51º for tray access
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝ SB24
34 ½˝
SB42-SB48
34 ½˝
24˝ SB24 BUTT-SB39
24˝
Wood Sink Base 27” Deep
One Drawer Front
SB2727 (Butt)•W
SB3027 BUTT•W
SB3327 BUTT•W
SB3627 BUTT•W Two Drawer Fronts
SB4227 •W
• No shelf • False drawer front(s)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
27˝
34 ½˝
27˝ SB2727-SB3627 BUTT
SB4227
Wood Sink Base 27” Deep w/Utensil Tray
One Utensil Tray
SB2727 (Butt)•W•UT
SB3027 BUTT•W•UT
SB3327 BUTT•W•UT
SB3627 BUTT•W•UT Two Utensil Trays
SB4227 •W•UT
• No shelf • Removable high -impact, tilt down, white
plastic storage tray installed on backside of drawer front
• Hinge detent holds drawer front in full open position
• Concealed self -enclosing hinging allows drawer front to tilt down 51° for tray access
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
27˝
34 ½˝
27˝
SB2727-SB3627 BUTT
SB4227
Wood Sink Base Full-Height
Specify R or L Single Door
SB24 R or L•W•FH Double Door
SB24 BUTT•W•FH
SB27 (Butt)•W•FH
SB30 BUTT•W•FH
SB33 BUTT•W•FH
SB36 BUTT•W•FH
SB39 •W•FH
SB42 •W•FH
SB48 •W•FH
• No shelf
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
34 ½˝
24˝
34 ½˝
24˝ SB24
SB24 BUTT-SB48
Specify R or L Single Door One Utensil Tray
SB24 R or L•W•UT Double Door
One Utensil Tray
SB24 BUTT•W•UT
SB27 (Butt)•W•UT
SB30 BUTT•W•UT
SB33 BUTT•W•UT
SB36 BUTT•W•UT
SB39 •W•UT
Double Door Two Utensil Trays
SB42 •W•UT
SB48 •W•UT
Base Cabinets
E13Base Cabinets
Deep Sink Base
DSB30
DSB33
DSB36
• No shelf • Designed for use with “farm/farm house”
style sinks • Trimmable face frame rail across top • Face frame center stile included on all
widths to provide extra sink support
Be sure to follow sink manufacturer specifications and instructions to ensure proper fit.
Make sure to choose a cabinet that is at least 4 1/2” wider than the outside sink dimensions
l PE
l APC
RD12
RD15
RD18
l RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
Cabinet Max Width
DSB30 25 ½˝
DSB33 28 ½˝
DSB36 31 ½˝
9 ½˝
9 ½˝
9 ½˝
Max Height
Maximum Trimmable Opening Sizes
34 ½˝
24˝
Sink Base Angle
Specify R or L
SBA36 R or L
SBA42 R or L
• One full -width false drawer front • Top panel must be cut in field to receive
sink • 29 1/4” minimum doorway clearance
required for delivery with cabinet door removed
• Adjacent cabinets can be installed directly without fillers
• Full overlay sink front door and false drawer front are similar in width to partial overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
l CFO
36" or 42"
17" or 25 ½"
24˝
24˝
36" or 42"
18 /˝29 /˝
14 /˝ Ror 25 /˝ R
17˝, 25 ½˝24˝ 24˝
34 ½˝
Base
Cab
inet
s
E14 Base Cabinets
Sink Front
Specify R or L Single Door
SF24 R or L
Double Door
SF24 BUTT
SF30 BUTT
SF36 BUTT
• One full -width false drawer front • Not trimmable • Toe Kick Backer included, shipped
unattached • Bottom panel not supplied, order
separately. See Sink Front Floor (SFF) in Base Accessories
• Optional Utensil Tray Kit (UTK) is available in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
34 ½˝
SF24
SF24BUTT-SF36BUTT
Sink Front Full-Height
SF24 BUTT•FH
SF30 BUTT•FH
SF36 BUTT•FH
• Toe Kick Backer included, shipped unattached
• Not trimmable • Bottom panel not supplied, order
separately. See Sink Front Floor (SFF) in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
Sink Front Angle
Specify R or L
SFA36 R or L
SFA39 R or L
SFA42 R or L
• One full -width false drawer front • Full overlay sink front door and false
drawer front are similar in width to partial overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Toe Kick Backer included, shipped unattached
• Bottom panel not supplied, order separately. See Sink Front Angle Floor (SFAF) in Base Accessories
• Optional Utensil Tray Kit (UTK) is available in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
24˝
36˝, 39˝, 42˝
36˝39˝42˝
17˝ 21 ¼˝ 25 ½˝
Sink Front Angle Full-Height
SFA36 •FH • Invertible for right or left hand use • Full overlay sink front is similar in width to
partial overlay cabinets in order to avoid interference with adjacent cabinet doors. This exposes more of the cabinet face frame
• Toe Kick Backer included, shipped unattached
• Bottom panel not supplied, order separately. See Sink Front Angle Floor (SFAF) in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
24˝
36˝
36˝
17˝
Base Cabinets
E15Base Cabinets
Removable Sink Front
One Drawer Front
RSF30 BUTT
RSF33 BUTT
RSF36 BUTT Two Drawer Fronts
RSF42
• Designed for easy field conversion from a standard sink base functionality to universal access open space
• Permanently installed countertop support rail is 6 -1/2” high x 3/4” thick solid wood with a factory installed standard height matching false drawer front(s) providing a seamless sink base appearance. (1) full -width drawer front on 30”, 33” and 36” widths; (2) false drawer fronts on 42” wide
• If a shorter countertop support is required when used for universal access as additional vertical clearance, a 3” filler can be used in place of the 6 1/2” high support rail. Order separately
• 3/4” thick removable plywood bottom panel with support hardware / leveling legs and a removable clipped -on toeboard provided
• Matching solid wood baseboard provided for bottom panel support along the kitchen wall
• Frame, doors, floor bottom and toeboard can be flat packed for easy storage in a minimum amount of space
• Frame attached to bottom panel using quick connect (cam -locks) fasteners providing a solid tight joint
• Some field assembly required; instructions and hardware included
• Doors and frame are shipped pre -assembled
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
34 ½˝
24˝
Universal Access Panel
UAP30
UAP33
UAP36
UAP42
• Designed for optional use with RSF and URSF
• Conceals/protects drain and water lines • Includes one 9” and one 15” high, 3/4”
thick laminate plywood panel • Panels are held with hidden spring clips,
removable without tools for easy access to plumbing
• Must be trimmed when Wood Veneer Paneling (WSK) is used on adjacent cabinets
• Installation instructions and mounting hardware included
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
3ROT
4ROT
6ROT
1FWROT
2FWROT
2DROT
4DROT
6DROT
2DFWROT
CFO
Base
Cab
inet
s
E16 Base Appliance Cabinets
Base Appliance Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - - All Plywood Construction RD21 - - - Reduce Depth 21” CFO - - - - Cabinet Front Only
BMC 30 24 34code width depth height
Base Oven Cabinet Universal
BOCU30
BOCU33 • Designed for under counter mounting of
single built -in ovens • No back panel allowing full access to electrical
connections • Includes an adjustable oven platform
supported with heavy -duty metal mounting brackets and screws which install into pre -drilled end panel holes at the four corners
• 1/2” end panels • 3” wide trimmable vertical stiles provide oven
opening width adjustment • 10” high trimmable horizontal rail along the
bottom provides opening height adjustment. May be trimmed to 1 1/2”
l PE
l APC
RD21
CFO
Opening Sizes
Cabinet Minimum Opening *Maximum Opening
BOCU30
BOCU33
* Bottom rail trimmed to 1 ½˝ high and top rail removed
24˝ wide x 18 ½˝ high
27˝ wide x 18 ½˝ high 31˝ wide x 28½˝ high
28˝ wide x 28 ½˝ high
34 ½˝
24˝
Drop-In Range Panel
DIP30 • 3/4” thick solid wood panel • Matching front panel may be trimmed to
fit drop -in range • Must be installed between two base cabinets • Toe Kick Backer included, shipped unattached • Matching Toe Kick cover (MTK) is required • Field trim as needed
PE
APC
RD21
CFO30˝
10˝
¾˝
Base Cabinets
E17Base Appliance Cabinets
Base Microwave Cabinet 34” H w/Deep Bottom Drawer
BMC242434
BMC272434
BMC302434
• Matching interior • 1/2” thick fixed shelf • Deep bottom drawer with full extension slides • Designed for countertop style microwaves • Shelf top surface is 3/16” below face frame rail
top edge • Cabinet opening cannot be trimmed
l PE
l APC
l RD21
l CFO
Opening SizesCabinet
BMC242434
BMC272434
BMC302434
15 /˝ high x 21˝ wide x 23 /˝ deep
15 /˝ high x 24˝ wide x 23 /˝ deep
15 /˝ high x 27˝ wide x 23 /˝ deep
24˝
34 ½˝
Dishwasher Panel
DWP • 3/16” thick veneered plywood panel • 23 3/4” x 26” high panel • Provides finished look to dishwasher • Trimmed to fit installation • Finished one side only
PE
APC
RD21
CFO
GrainDirection
/˝
Dishwasher Raised Panel
DWP •RP • 3/16” thick veneered plywood panel • 23 3/4” x 26” high panel • 22 1/8” wide x 16” high door (both partial and
full overlay) • Provides finished look to dishwasher • Panel trimmed to fit installation • May weigh up to 10 lbs. depending on door
style • Hardware to mount door to panel included • Check with dishwasher manufacturers
instructions prior to installing panel
PE
APC
RD21
CFO
GrainDirection
Base
Cab
inet
s
E18 Base Corner Cabinets
Base Corner Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - - - Plywood Ends APC - - - - - - - All Plywood Construction RD12 - - - - - - Reduce Depth 12” RD15 - - - - - - Reduce Depth 15” RD18 - - - - - - Reduce Depth 18” RD21 - - - - - - Reduce Depth 21” 1ROT - - - - - - 1 Roll -out Tray 2ROT - - - - - - 2 Roll -out Trays 1FWROT - - - 1 Full Width Tray 2FWROT - - - 2 Full Width Trays 2DROT - - - - - 2 Deep Roll -out Trays 2DFWROT - - 2 Deep Full Width Roll -out Trays CFO - - - - - - - Cabinet Front Only
PBBC 27 R •2FWTcode width hinge suffix
Base Blind Corner Cabinet Information
• Base blind corner cabinets provide access to corner space and permit adjustability of up to 2 7/8” maximum to aid in kitchen layout. Consult chart for “pull” dimensions and minimum wall space requirements
• “Pulling” the cabinet away from the corner (adding up to 2 7/8” maximum to the void area), and using the supplied filler and panel, provides clearance for opening doors and drawers when decorative hardware is used
• R or L indicates blind end of cabinet. Please specify • Door hinged on same side as blind • Full overlay products must be pulled the maximum 2 7/8” for proper hardware clearance • Base Filler Overlays (BFOL) available separately for all Full Overlay door styles except Flaxton. Overlays are used to cover the exposed filler and frame. This provides a continuous door appearance. Overlays must be field cut (mitered) to required width determined by cabinet “pull”. See Filler Overlay Detail below. • Note: A 3” Base Filler and Blind Panel is included with each BBC cabinet ordered, shipped unattached
BBC39
BBC42
BBC45
BBC48
BBC51
Base Blind
Corner
(C) Frame Opening
Full Overlay
(B) Cabinet
Width
24"
30"
36"
42"
48"
39"
NoPull
MaxPull
38 /"
41 /"
44 /"
47 /"
50 /"
5" h x 7 ½" w
5" h x 10 ½" w
5" h x 13 ½" w
5" h x 16 ½" w
5" h x 19 ½" w
7 ½" w x 2 0 ½" h10 ½" w x 2 0 ½" h13 ½" w x 2 0 ½" h16 ½" w x 2 0 ½" h19 ½" w x 2 0 ½" h
DrawerOpening
Door Opening
NoPull
/"
/"
/"
/"
/"
MaxPull
3 /"
3 /"
3 /"
3 /"
3 /"
(A)Wall Space
(D) Door Hardware Clearance
36"
42"
45"
48"
BBC39
BBC42
BBC45
BBC48
BBC51
Base Blind
Corner
(C) Frame Opening
Partial Overlay
(B) Cabinet
Width
24"
30"
36"
42"
48"
39"
NoPull
MaxPull
38 /"
41 /"
44 /"
47 /"
50 /"
5" h x 7 ½" w
5" h x 10 ½" w
5" h x 13 ½" w
5" h x 16 ½" w
5" h x 19 ½" w
7 ½" w x 2 0 ½" h10 ½" w x 2 0 ½" h13 ½" w x 2 0 ½" h16 ½" w x 2 0 ½" h19 ½" w x 2 0 ½" h
DrawerOpening
Door Opening
NoPull
MaxPull
(A)Wall Space
(D) Door Hardware Clearance
36"
42"
45"
48"
1 /"
1 /"
1 /"
1 /"
1 /"
4 ½"
4 ½"
4 ½"
4 ½"
4 ½"
Blind Right (BR)
Base Blind Corner
AB
D
C
Filler and Panel
Frame Opening
BBC Cabinet (Blind Right)
AdjoiningCabinet
Filler Overlay Detail Full Overlay Door Styles
No Pull Line
1” Pull
Blind Panel
3” Filler
BBCDoor
Adjoining Cabinet Door
Overlay
Base Cabinets
E19Base Corner Cabinets
Base Blind Corner
Specify R or L
BBC39 R or L
BBC42 R or L
BBC45 R or L
BBC48 R or L
BBC51 R or L
• R or L indicates blind • One drawer • Blind Panel with 3” filler included, shipped
unattached I Roll -Out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝ Blind Right shown
Peninsula Base Blind Corner Single Door
Specify R or L
PBBC27 R or L
• One adjustable shelf • Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
l 1ROT
l 2ROT
1FWROT
2FWROT
l 2DROT
2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝
Sink PBBC
PB
Illustration is Right Hand hinging
Kitchen Side
Kitchen Side
Peninsula Side
Peninsula Side
Blind panelw/3” filler
24 /˝
3” Fillerw/toekick
backer
Base
Cab
inet
s
E20 Base Corner Cabinets
Peninsula Base Blind Corner Double Door
PBBC27 BUTT • One adjustable shelf • Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
l 1FWROT
l 2FWROT
2DROT
l 2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝
Sink PBBC
PB
Kitchen Side Peninsula Side
Blind panelw/3” filler
24 /˝
3” Fillerw/toekick
backer
Kitchen Side
Peninsula Side
Peninsula Base Blind Corner w/Two Full-Width Trays
Specify R or L
PBBC27 R or L•2FWT
PBBC27 BUTT•2FWT
• Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Two Full -width Roll -out Trays (FWROT) • Front and back face frames are pre -drilled for
optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝Kitchen Side
Peninsula Side
Peninsula Base Blind Corner w/Two Deep Full-Width Trays
Specify R or L
PBBC27 R or L•2DFWT
PBBC27 BUTT•2DFWT
• Cabinet is 24” wide • Cabinet can be pulled a maximum of 3”
from wall • Working drawer and door(s) on peninsula
side • Use to start a peninsula run • One 3” filler (BF3) and toespace assembly
(toekick backer) included, shipped unattached
• Blind Panel with 3” filler included, shipped unattached
• Two Deep Full -width Roll -out Trays (DFWROT)
• Front and back face frames are pre -drilled for optional roll out trays
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
CFO
3˝3˝
34 ½˝
24 /˝Kitchen Side
Peninsula Side
Base Cabinets
E21Base Corner Cabinets
Lazy Susan
Specify R or L
LS33 R or L
LS36 R or L
• Two 28” diameter high impact, pie -cut revolving white plastic shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Two piece bi -fold door with independent adjustment
• 168° opening hinges on face frame door • Full Overlay door style face frame stiles
are notched to accept door hinges. Door hinging cannot be inverted in field
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝ 24˝
14 /˝
9˝
24˝
9˝24˝
33˝
33˝
6˝
6˝
28˝ shelf
diameter
LS33
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
LS36
Wood Lazy Susan
Specify R or L
LS36 R or L•WLS
• Two 32” diameter pie -cut revolving wood shelves
• Shelves rotate independently of doors and each other
• Shelf height cannot be adjusted • Shelf load rating of 15 lbs. per square foot,
not to exceed 50 lbs. • Two piece bi -fold door with independent
adjustment • 33” minimum doorway clearance
suggested for delivery • 168° opening hinges on face frame door • Full Overlay door style face frame stiles are
notched to accept door hinges. Door hinging cannot be inverted in field
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝ 24˝
9 /˝
12˝
24˝
12˝24˝
36˝
36˝
2 /˝
32˝ shelf
diameter
2 /˝
Base
Cab
inet
s
E22 Base Corner Cabinets
Base Corner Fixed Shelf
Specify R or L
BCFS36 R or L
• One fixed, pie -cut shelf in center position • Two piece bi -fold door with independent
adjustment • 168° opening hinges on face frame door • Full Overlay door style face frame stiles
are notched to accept door hinges. Door hinging cannot be inverted in field
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet
door opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
34 ½˝
24˝24˝
36˝
24˝ 12˝
14 /˝
36˝
24˝
12˝
6˝
6˝
Lazy Susan Angle
Specify R or L
LSA36 R or L
• Two 28˝ diameter high impact white plastic rotating shelves
• Shelves rotate independently of doors and each other
• Shelf load rating of 15 lbs. per square foot, not to exceed 50 lbs.
• Adjacent cabinets can be installed directly without fillers
• Requires 36” of wall space in each direction • 29 1/4” minimum doorway clearance
required for delivery with cabinet door removed
• Full and Partial Overlay door widths are similar to avoid interference with adjacent cabinet doors
I Note: Back panel (barrel) will not be plywood when APC is ordered
Caution: If cabinet is installed next to an appliance deeper than 25”, it may interfere with the cabinet door
opening. Options available: A) Use a filler between cabinet and appliance, B) Pull cabinet even with appliance front, which will result in a deeper countertop and overall base cabinet depth dimension
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
1FWROT
2FWROT
2DROT
2DFWROT
l CFO
24˝24˝17˝
34 ½˝
17˝
24˝
24˝
36˝
36˝18 /˝
29 /˝
14 /˝ R
Base Cabinets
E23Base End Run Cabinets
Base End Run Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
APC - - All Plywood Construction CFO - - Cabinet Front Only
BEA 12 Rcode depth hinge
Base Corner Angle
BCA24 BUTT • One adjustable shelf • For use at the right or left end of cabinet run
or in a corner
l APC
l CFO
24˝
24˝
45
34 ½˝
24˝ 24˝
Base End Corner
BEC24 • One adjustable shelf • Two full -height doors • For use at the right or left end of cabinet run
or in a corner
l APC
l CFO
34 ½˝
24˝ 24˝
22 ½˝
24˝
24˝
17 /˝
17 /˝63.5°
143˝
Base End Angle
Specify R or L
BEA12 R or L
• Two adjustable shelves • Specify right or left hand to designate 12”
deep orientation • Designed to transition from 24” deep base
cabinet to 12” deep base cabinet • 24” deep end not designed to be exposed • Full and Partial Overlay door widths are
similar to avoid interference with adjacent cabinet doors
l APC
l CFO
12˝ 12 /˝
34 ½˝
24˝
/˝
12˝
24˝12 /˝
17˝
45°
Base
Cab
inet
s
E24 Base Specialty Cabinets
Base Specialty Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - - All Plywood Construction
BWBT 18 •2code width suffix
Base Filler Pull-Out
BFP3
2 3/4” shelf width; 1 3/4” usable space between chrome rails; 3 1/16” required between adjacent cabinets
BFP6
5 3/4” shelf width; 4 3/4” usable space between chrome rails; 6 1/16” required between adjacent cabinets
• 3/4” thick solid wood pre -drilled filler included, shipped unattached
• Wood filler aligns with face frames of adjacent wall cabinets
• Three adjustable hardwood shelves • Full extension runners; one on top, two on
bottom • Must be installed between two base cabinets • Natural finish hardwood interior
Do not use filler pullouts at the end of cabinet runs or next to appliances. They must be installed
between two cabinets or a cabinet and an end panel.
PE
APC
3˝, 6˝
29 /˝34½˝
Base Pantry Pull-Out
BPP9 • Four -tier (three adjustable fixed shelves) maple base organizer with clear coat finish
• Full -height door attached to pull -out • Tiers are 3 3/4” wide • 1/4” diameter chrome plated steel rail side
extensions help prevent stored items from falling out, yet still viewable
• White epoxy coated full -extension ball bearing slides
l PE
l APC
34 ½˝
24˝
Base Top Mount Wastebasket – Single
BWBT15 • One standard height full -width drawer • Includes one 35 qt. white plastic basket and
one 5 1/2” deep white plastic tray for garbage bag storage
• Basket(s) rest in a natural maple plywood frame
• Basket(s) are easily removable for emptying or cleaning
• Top mounted wastebasket assembly rolls out on full -extension ball -bearing slides
l PE
l APC
34 ½˝
24˝
Base Cabinets
E25Base Specialty Cabinets
Base Top Mount Wastebasket – Double
BWBT18 •2 • One standard height full -width drawer • Basket(s) rest in a natural maple plywood
frame • 35 qt. capacity white basket(s) • Basket(s) are easily removable for emptying or
cleaning • Top mounted wastebasket assembly rolls out
on full -extension ball -bearing slides
l PE
l APC
34 ½˝
24˝
Base
Cab
inet
s
E26 Base Accessories
Base Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
BFOL 3 •30code width suffix
Base Wastebasket ROT Floor Mount Kit
BWBFMK .ROT • Requires base cabinet roll -out tray in the bottom position, not included
• Fits base cabinets 15” or wider • White epoxy coated wire • Includes 30 -quart white plastic bin • Installation instructions and mounting
hardware included
C
M
O
9 ½˝
18˝
15 ½˝
Base Wastebasket Floor Mount Kit
BWBFMK .2 • Bins mounted on white laminated platform with full extension slides
• 11 1/2” wide pull out, fits minimum 15” single door cabinet or 27” double door cabinet unless cabinet is butt door
• White epoxy coated wire • Includes two 27 -quart white plastic bins • Load rated at 40 lbs. • Does not fit 9” or 12” wide base or 27” wide
base with center stile • Installation instructions and mounting
hardware included
C
M
O
22˝ 11 ½˝
19 ½˝
Base Cabinets
E27Base Accessories
Wire Tray Divider Roll-out
WTDRO9 2 partitions
WTDRO12 3 partitions
• White epoxy coated wire • 3/4 extension sides • For 9” or 12” wide base cabinets • Load rated at 20 lbs. • Installation instructions and mounting
hardware included
C
M
O
6 /˝ 9 /˝
13 ¾˝
22˝
WTDR09 shown
Wire Tray Divider Kit
WTDK16 • White epoxy coated wire • Installation instructions and mounting
hardware included
C
M
O
11˝
16˝
Under Sink Tote
UST12
UST15 • White epoxy coated wire • Designed for under sink storage; maximizes
space around plumbing fixtures • 3/4 extension roll -out assembly mounts to
floor of cabinet • Load rated at 20 lbs. • Installation instructions and mounting
hardware included
C
M
O
18 /˝
15 ¼˝
12˝ 15˝
Foil Box Rack
FBRK18 • White epoxy coated wire • Installation instructions and mounting
hardware included • Designed to fit a Sink Base 36 (SB36)
C
M
O
8˝
6 ¼˝11 ¼˝
Base
Cab
inet
s
E28 Base Accessories
Door Mount Towel Bar
DMTB • White epoxy coated wire • Three 10” long towel bars • Designed to fit SB33 cabinets or wider • Installation instructions and mounting
hardware included
C
M
O
12 /˝
Sliding Towel Bar
STB • Three -prong chrome -plated 17” long wire towel bars
• Mounts to interior of cabinet side panel • Slides on ball bearing slides • Designed for sink base or 21” deep vanity
bowl cabinets • Installation instructions and mounting
hardware included
C
M
O
17 /˝(unextended)
Drawer Partition
DPK • Natural finish hardwood • Kit contains two self -adhesive end brackets
and one natural finished hardwood divider • Brackets are clear plastic and include two
holes for optional screw attachment to drawer side (screws not included)
• For use in all drawers and Deep Roll -out Trays (DROT)
• Field trim divider to fit • Installation instructions and mounting
hardware included
C
M
O
Partition
BracketDrawer Side
or Front/Back
½˝
3 /˝20 ½˝
Base Cabinets
E29Base Accessories
Drawer Organizer Kit
DOKN
DOKW
• Natural finish hardwood • Adjustable drawer organizing system • DOKN fits B15 and wider drawers
DOKW fits B21 and wider drawers • DOKN includes: two dividers 14 17/32” long x 2 1/4” high x 3/8” thick; three dividers 2 11/16” long x 2 1/4” high x 3/8” thick; four dividers 4 1/4” long x 2 1/4” high x 3/8” thick • DOKW includes: three dividers 14 17/32” long x 2 1/4” high x 3/8” thick; four dividers 2 17/32” long x 2 1/4” high x 3/8” thick; two dividers 5 17/32” long x 2 1/4” high x 3/8” thick; four dividers 8 17/32” long x 2 1/4” high x 3/8” thick • Installation instructions and mounting hardware
included
C
M
O
Suggested layouts are shown
2 /˝
19 /˝
(including dividers)
9 /˝
DOKN
2 /˝
19 /˝ 15 /˝
(including dividers)
Suggested layouts are shownDOKW
Base
Cab
inet
s
E30 Base Accessories
Cutlery Divider
CDK18 • Five compartment cutlery organizer for 18” wide cabinets; can be cut down for 15” wide cabinets
• Natural Maple laminate • 1 7/16” must be field cut off back edge
C
v M
O
2 ½˝
12 /˝20 /˝
Spice Drawer Insert Kit
Height Width
SDIK15 1 5/8” 10”
SDIK18 1 5/8” 13”
SDIK21 1 5/8” 16”
SDIK24 1 5/8” 19”
• Textured white polymer plastic • Trimmed to fit installation
C
M
O
1 /˝19 /˝
10˝ 13˝ 16˝ 19˝
Pegged Deep Drawer Organizer
• Natural finish hardwood • For securing pots, pans, plates and other bulky
items in deep drawers of cabinets • Kit includes eight 6” long triangular shaped
natural finished solid hardwood pegs with a metal locating pin extended out of one end
• Additional triangular hardwood pegs are available in quantity of 4; order SKU: PDOPK/4CT
C
M
O
19 /˝
6 ½˝
Utensil Tray Kit
UTK12
UTK22 • Removable high -impact white plastic tray
installs on backside of drawer front for convenient out -of -sight storage of small items, soap, scouring pads, etc.
• Installation instructions and mounting hardware included
• UTK22 fits sink base cabinets 27” through 39” wide
• UTK12 fits sink base cabinets 30” or wider • Order decorative hardware separately
If installing one UTK12 on a 24” or 27” wide sink base, consider utilizing the second tray on the backside for
storage
C
M
O
2˝
UTK22
3 /˝11˝
3 /˝ 22˝
UTK12
2 /˝
PDO30
PDO36
Width
27 1/2”
30 7/8”
Base Cabinets
E31Base Accessories
Toe Kick
Laminate
MTK8
MTK8 •4 Wood Veneer
WMTK8
WMTK8 •4
• Edges are unfinished • Field installation only • Offered individually or four per carton (32 ft.) • Note: Matching toe kick is not automatically
supplied with cabinets. It must be ordered as a separate item
v C
v M
v O
96˝
4 /˝
⁄˝ thick plywood
Toe Kick Backer
TKBK6
TKBK36 • Plywood construction • Provides support for matching toe kick cover • Shipped assembled • Field trim as needed • TKBK6 for use with Base Fillers (BF3 and BF6) • TKBK36 for use with Sink Fronts (SF and SFA)
and Drop -in Range Panel (DIP30)
v C
v M
v O
6˝
36˝
Sink Front Floor
SFF2336 • 3/8” thick engineered wood with easy clean laminate on one side; backside unfinished
• Natural Maple laminate • Grain direction runs lengthwise • Field trim as needed • Installation screws included • Available in All Plywood Construction (APC)
C
M
O
23 /˝ 36 /˝
/˝
Sink Front Angle Floor
SFAF4242 • 3/8” thick engineered wood with easy clean laminate on one side; backside unfinished
• Natural Maple laminate • Field trim as needed • Installation screws included • Available in All Plywood Construction (APC)
C
M
O
42 /˝42 /˝
/˝
Base
Cab
inet
s
E32 Base Accessories
Base Filler
BF3
BF6
BF3X3
• 3/4” thick solid wood • Toe Kick included, shipped unattached • Backside of filler not finished
v C
v M
v O
3˝, 6˝
34 ½˝
¾˝
3˝x 3˝
34 ½˝
¾˝
BF3BF6
BF3x3
Base Filler Overlay
BFOL3•30
BFOL6•30
BFOL3X3
• Attaches to 3” or 6” wide filler, not included. Order separately
• BFOL3x3 includes filler and toe kick • 3/4” thick with matching profile on all four
edges, sized to match door height of adjacent cabinet
• Spacers installed on backside to align with doors of adjacent cabinet
• Mounting hardware included • Available for all full overlay door styles except
Flaxton
v C
v M
v O
29 ¼˝
2 /˝ 5 /˝ 3˝ x 3˝
34 ½˝29 ¼˝
BFOL3BFOL6
BFOL3x3
Base Fluted Filler
BFF3 • 3/4” thick solid wood • Use between cabinets or to create a column
effect. Can be combined with other moldings and panels for decorative effects
• Four flutes • Backside of filler not finished
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
34 ½˝
3˝
¾˝
/˝
Base Box
BB3
BB6 • Front is 3/4˝ solid wood • End panels are recessed 1/4” • Finished front and both sides • Vertical wood grain • May be used on either right or left end • Available with Plywood Ends (PE)
v C
v M
v O
24˝ 3˝, 6˝
34 ½˝
¾˝¼˝
Base Cabinets
E33Base Accessories
Base Column
3” Wide
BC315
BC327 6” Wide
BC615
BC627
• Front is 3/4˝ solid wood • Finished front and both sides • No toe kick • Vertical wood grain • Flush end panels • Available with Plywood Ends (PE)
v C
v M
v O¾˝
15˝, 27˝ 3˝, 6˝
34 ½˝
Base Fluted Column
BFC615
BFC627 • Fluted front is 3/4” solid wood • Six flutes • Finished front and both sides • No toe kick • Flush end panels • Vertical wood grain • May be used on either right or left end • Available with Plywood Ends (PE)
v C
v M
v O¾˝
15˝, 27˝ 6˝
34 ½˝
6˝
1 ½˝
Base End Panel w/Stile
BEP3
BEP6 • For right or left hand use • The mounting cleat is finished but is not a
matching wood species to the face • Toespace notch must be field cut • Available with Plywood Ends (PE) or All
Plywood Construction (APC)
v C
v M
v O
24˝
34 ½˝
3˝, 6˝Field cutToespace
Stile
Base
Cab
inet
s
E34 Base Accessories
Matching Base End Panel
MBEP2434 • Provides a finished furniture look to cabinet
• 3/16” thick base panel with matching decorative door
• Full overlay door styles shipped unattached to panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partial overlay door styles; door shipped attached to panel
• For right or left hand use • Field installation only • Toespace notch must be field cut
v C
v M
v O
Field cutToespace
/˝
34 ½˝
23 ¼˝
Item
MBEP2434 23 ¼˝
Width
34 ½˝
Height
29 ¼˝
Height
23 /˝
Width
28˝
Height
22 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
Tall Cabinets
F1Tall Cabinets
Tall Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Note: Standard tall cabinet box depth is 12” or 24” unless stated otherwise. Add door thickness with bumpers for total depth.
When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - Plywood Ends APC - - - - - All Plywood Construction RD9 - - - - - Reduce Depth 9” RD12 - - - - Reduce Depth 12” RD15 - - - - Reduce Depth 15” RD18 - - - - Reduce Depth 18” RD21 - - - - Reduce Depth 21” CFO - - - - - Cabinet Front Only
U 15 12 84 Rcode width depth height hinge
Utility Cabinets 12” Deep
Specify R or L 84” High
U151284 R or L
U181284 R or L
U241284 R or L
U241284 BUTT
U301284 BUTT
n U361284 BUTT 90” High
U151290 R or L
U181290 R or L
U241290 R or L
U241290 BUTT
U301290 BUTT
n U361290 BUTT 93” High
U151293 R or L
U181293 R or L
U241293 R or L
U241293 BUTT
U301293 BUTT
n U361293 BUTT 96” High
U151296 R or L
U181296 R or L
U241296 R or L
U241296 BUTT
U301296 BUTT
n U361296 BUTT
• Fixedshelfbetweentopandbottomsection with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• ShelfKit(SK)must be ordered separately; see Shelving section of this book
• Talldoorsaretwo-piecepanelconstruction except Flaxton
• 30”and36”widecabinetshave3”widecenterstile in upper section only
• Interiorheightoftallsectionon84”,93”and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 93”and96”tallcabinetsincludetoekickplatform, shipped unattached
• ToeKickcoverrequiredonexposedsidesoftoe kick platform
• Endpanelsofbottomsectionarepre-drilledfor optional shelves
l PE
l APC
l RD9
RD12
RD15
RD18
RD21
l CFO
12˝
84˝90˝93˝96˝
12˝
84˝90˝93˝96˝
U15-U24
U24BUTT-U36BUTT
n 3/8” thick back panel
Tall
Cabi
nets
F2 Tall Cabinets
Utility Cabinets 24” Deep Specify R or L
84” H
U152484 R or L
U182484 R or L
U242484 R or L
U242484 BUTT
U302484 BUTT
n U362484 BUTT 90” High
U152490 R or L
U182490 R or L
U242490 R or L
U242490 BUTT
U302490 BUTT
n U362490 BUTT 93” High
U152493 R or L
U182493 R or L
U242493 R or L
U242493 BUTT
U302493 BUTT
n U362493 BUTT 96” High
U152496 R or L
U182496 R or L
U242496 R or L
U242496 BUTT
U302496 BUTT
n U362496 BUTT
• Fixedshelfbetweentopandbottomsection with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• ShelfKit(SK)forlowersectionmust be ordered separately; see Shelving section of this book
• Talldoorsaretwo-piecepanelconstructionexcept Flaxton
• 30”and36”widecabinetshave3”widecenterstile in upper section only
• Interiorheightoftallsectionon84”,93”and 96” tall cabinets is 60 15/16”; 90” tall is 61 7/16”
• 93”and96”tallcabinetsincludetoekickplatform, shipped unattached
• ToeKickcoverrequiredonexposedsidesoftoe kick platform
l PE
l APC
l RD9
l RD12
l RD15
l RD18
l RD21
l CFO
24˝
84˝90˝93˝96˝
24˝
84˝90˝93˝96˝
U15-U24
U24BUTT-U36BUTT
Pantry Cabinet
PC362484 BUTT
PC362490 BUTT
PC362493 BUTT
PC362496 BUTT
• Fixedshelfbetweentopandbottomsection with adjustable shelves in top section: 84” high -no shelves; 90” and 93” high -1 shelf; 96” high -2 shelves
• 3”widecenterstileinuppersectiononly • 1”widecenterpartitionrunsfullheightin
bottom section • Endpanelsandcenterpartitioninbottom
section are pre -drilled for half -depth adjustable shelves (not included)
• 3/8”thickbackpanel • Talldoorsaretwo-piecepanelconstruction
except Flaxton • PantryCabinetcanbeinstallednexttoawall
or refrigerator. Optional interior racks will function if door opening is restricted to no less than 90°
• Talldoorsarepre-drilledformountingDoorPantry Rack (DPR)
• Reinforcedcabinetbottom • 93”and96”tallcabinetsincludetoekick
platform, shipped unattached • ToeKickcoverrequiredonexposedsidesof
toe kick platform • FullPantryConfigurationoptionsinclude:two
Pantry Door Racks (DPR18), two Swing Out Pantry Racks (SPR) and two Pantry Cabinet ShelfKits(PCSK),allitemsareorderedindividually
l PE
l APC
RD9
RD12
RD15
RD18
RD21
l CFO
84˝90˝93˝96˝
24˝
PCSK3612 PCSK3612
SPRSPR
DPR18 DPR18
36˝
24˝
Pantry Cabinet Accessory Configuration
n 3/8” thick back panel
Tall Cabinets
F3Tall Appliance Cabinets
Tall Appliance Cabinets
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Note: Standard tall cabinet box depth is 12” or 24” unless stated otherwise. Add door thickness with bumpers for total depth.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - Plywood Ends APC - - - All Plywood Construction CFO - - - Cabinet Front Only
OC 33 24 90code width depth height
Oven Cabinet – Single w/3” Stiles
84” High
OC272484 (Butt)S OC302484 BUTTS OC332484 BUTTS 90” High
OC272490 (Butt)S OC302490 BUTTS OC332490 BUTTS 93” High
OC272493 (Butt)S OC302493 BUTTS OC332493 BUTTS 96” High
OC272496 (Butt)S OC302496 BUTTS OC332496 BUTTS
• Fixedshelfbetweentopandmiddlesection.Adjustable shelves in top section: 84” high–no shelves; 90” high and 93” high–1 shelf; 96” high–2 shelves
• Oneadjustableshelfinbottomsection • Cabinetdoorsare:5 1/2”shorterontopthanthebottomfor84”high
cabinets, are equal height on 90” high cabinets, 3 1/2” taller on top than the bottom for 93” high cabinets and are 6 1/2” taller on top than the bottom for 96” high cabinets
• Centersectionaccommodatessingleovens • 93”and96”tallcabinetsincludetoekickplatform,shipped
unattached • 3”wide,trimmablestilesprovideopeningwidthadjustmentin
BrieandMeringue.Allotherfinisheshave1 1/2”wideremovable,trimmable vertical stiles for easy adjustment
• ToeKickcoverrequiredonexposedsidesoftoekickplatform • Includesadjustableovenplatformwithheavy-dutymounting
brackets and screws that install into pre -drilled end panel holes. Order additional support platform kits as needed. See Oven Cabinet Shelf Platform (OCSP)
• SeeCabinetSpecificationsandOptionsforovencutoutdimensions
l PE
l APC
l CFO
84˝90˝93˝96˝
24˝
Oven Cabinet – Universal
84” High
OC272484 (Butt)U OC302484 BUTTU OC332484 BUTTU 90” High
OC272490 (Butt)U OC302490 BUTTU OC332490 BUTTU 93” High
OC272493 (Butt)U OC302493 BUTTU OC332493 BUTTU 96” High
OC272496 (Butt)U OC302496 BUTTU OC332496 BUTTU
• Fixedshelfbetweentopandmiddlesection.Adjustable shelves in top section: 84” high–no shelves; 90” high and 93” high–1 shelf; 96” high–2 shelves
• Threefull-widthdraweropeningsatbottom • Includesonefull-widthdrawer.Orderadditionaldrawer(s)as
needed.SeeOvenDrawerKit(ODK) • Face-mounteddoorhingesprovidematchingframereveals • Centersectionaccommodatessingleanddoubleovensby
trimming or removing horizontal cross rails • Faceframerailsareattachedtostileswithscrewsonthebackside
for easy removal • 93”and96”tallcabinetsincludetoekickplatform,shipped
unattached • ToeKickcoverrequiredonexposedsidesoftoekickplatform • Includesadjustableovenplatformwithheavy-dutymounting
brackets and screws that install into pre -drilled end panel holes. Order additional support platform kits as needed. See Oven Cabinet Shelf Platform (OCSP)
• SeeCabinetSpecificationsandOptionsforovencutoutdimensions
l PE
l APC
l CFO
84˝90˝93˝96˝
24˝
Oven Drawer Kit
ODK27
ODK30
ODK33
• Availableinalldoorstyles • Kitincludes;1drawerfront,1drawercore,slidesandall
mounting hardware
PE
APC
CFO
Tall
Cabi
nets
F4 Tall Accessories
Tall Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
MTEP 21 96code width height
Door Pantry Rack
DPR18 • Solid,naturalfinished,hardwoodunit,adjustable shelves and fences
• Includes:sixadjustableshelves,12wiresupports and seven 2” high fences
• Rackisdesignedtosupportupto50lbs(3 1/2lbs. per shelf)
• Mountstobacksidesoftalldoorsonallpantry and 18” or 36” wide utility cabinets,
• FullOverlaydoorstylesrequiredrillingatthebottom end of rack and special hardware that is included for Door Pantry Rack installation
C
M
O58 ¼˝
11˝
4 /˝
Swing-Out Pantry Rack
SPR • Solid,naturalfinished,hardwoodunit,adjustable shelves, fences and wire shelf supports
• Includes:12adjustableshelves,24wireshelfsupports and 14 - 2” high fences
• Rackisdesignedtosupportupto50lbs.,(3 1/2 lbs. per shelf)
• Pantrycabinetispre-drilledforinstallation • Mountinghardwareincluded
C
M
O
11˝
58 ¼˝
8˝
Pantry Cabinet Shelf Kit
10 19/32” Deep x 16 1/2” Wide
PCSK3612
• Foruseinbottomsectionof36”widepantry cabinets
• Shelvesarelaminatedonbothsideswithmatching edge banding on front edge
• NaturalMaplelaminate • Kitincludesfiveshelvesand20clear
polycarbonate shelf supports per carton • Ordertwokitstoaddfiveshelvestoboth
halves of a pantry cabinet • 3/4”thickengineeredwood • AvailableinAllPlywoodConstruction(APC)
C
v M
O
Tall Cabinets
F5Tall Accessories
Oven Cabinet Support Platform
OCSP27
OCSP30
OCSP33
• 1 1/8”thick,unfinishedengineeredwood • ForinstallingsecondapplianceinOven
Cabinet Universal (OC_U) • Sameshelfplatformandhardwareasincluded
with Oven Cabinet Universal (OC_U) • Includesfourheavy-dutymetalmounting
brackets and eight screws which install into pre -drilled holes in cabinet end panels
• AvailableinAllPlywoodConstruction(APC)
C
M
O
Tall Filler
TF3•84
TF3•90
TF3•93
TF3•96
• 3/4”thicksolidwood • ToeKickincluded,shippedunattached • Backsideoffillernotfinished
v C
v M
v O
84˝90˝93˝96˝
3˝
¾˝
Tall Filler Overlay
TFOL3•84
TFOL3•90
TFOL3•93
TFOL3•96
• 3/4”thickwithmatchingprofileonallfour edges, sized to match door height of adjacent cabinet
• Specifydoorstyle,specieandfinish • Attachesto3”widefillers,not included.
Order separately • Spacersinstalledonbacksidetoalignwith
doors of adjacent cabinet • Mountinghardwareincluded • Availableforallfulloverlaydoorstylesexcept
Flaxton
v C
v M
v O
2 /˝
78 ¾˝84 ¾˝87 ¾˝90 ¾˝
Tall Fluted Filler
TFF3•84
TFF3•90
TFF3•93
TFF3•96
• 3/4”thicksolidwood • Fourflutes • Backsideoffillernotfinished • Usebetweencabinetsortocreateacolumn
effect. Can be combined with other moldings and panels for decorative effects
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
84˝90˝93˝96˝
3˝
¾˝/˝
Tall
Cabi
nets
F6 Tall Accessories
Tall End Panel
• 3/4”thickengineeredwoodcorewithvertical grain veneer on both sides and edge banded on one long edge for Cherry, Maple and Oak
• Usenexttorefrigeratortoconcealside,also supports 24” deep wall cabinet over refrigerator
• BrieandMeringuearepaintedMaple • AvailableinAllPlywoodConstruction(APC)
v C
v M
v O
32˝
96˝
Grain Direction
One long edge
finished
¾˝
Tall End Panel w/Stile
TEP 1 1/2•84
TEP 1 1/2•96 • 1/2”thickplywoodfinishedtomatch • Usenexttorefrigeratortoconcealside,
also supports 24” deep wall cabinet over refrigerator
v C
v M
v O24˝
84˝or
96˝
1 ½˝Wide Filler
Field cutToespace
Matching Tall End Panel
84” High
MTEP1284
MTEP2184
MTEP2484 90” High
MTEP1290
MTEP2190
MTEP2490 93” High
MTEP1293
MTEP2193
MTEP2493 96” High
MTEP1296
MTEP2196
MTEP2496
• Providesafinishedfurniturelooktocabinet
• 3/16”thickbasepanelwithmatchingdecorative door
• Doorsandpanelareshippedseparately;fieldassembly required
• Decorativedoorsincludeoneshortandonetall door
• FullOverlaydoorstylesoverlapcabinetframeto match reveals
• Forrightorlefthanduse • Toespacenotchmustbefieldcut
v C
v M
v O
FieldcutToespace
11 ¼˝, 20 ¼˝, 23 ¼˝
Grain Direction
84˝90˝93˝96˝
Panel
Panel
Item
MTEP1284
MTEP1290
MTEP1293
MTEP1296
MTEP2184
MTEP2190
MTEP2193
MTEP2196
MTEP2484
MTEP2490
MTEP2493
MTEP2496
11 ¼˝
11 ¼˝
11 ¼˝
11 ¼˝
20 ¼˝
20 ¼˝
20 ¼˝
20 ¼˝
23 ¼˝
23 ¼˝
23 ¼˝
23 ¼˝
Width
84˝
90˝
93˝
96˝
84˝
90˝
93˝
96˝
84˝
90˝
93˝
96˝
Height
Panel Size
Engineered Wood Finished both sides
sDWTEP96 96”x32”x3/4”
Vanity Cabinets
G1Vanity Cabinets
Vanity Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Note: Standard vanity cabinet box depth is 18” or 21” unless stated otherwise. Add door thickness for total depth. Standard vanity cabinet height is 34 1/2” unless stated otherwise.
All double door cabinets will have butt doors unless stated otherwise. When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - Plywood Ends APC - - - - - All Plywood Construction RD9 - - - - - Reduce Depth 9” RD12 - - - - Reduce Depth 12” RD15 - - - - Reduce Depth 15” RD18 - - - - Reduce Depth 18” CFO - - - - - Cabinet Front Only
VCD 42 18 34 •8code width depth height suffix
Vanity Sink Base Double Door
31 1/2” High, 18” Deep One Drawer Front
sVSB241831 BUTT
sVSB271831 (Butt)
sVSB301831 BUTT
sVSB331831 BUTT
sVSB361831 BUTT
sVSB391831 Two Drawer Fronts
sVSB421831 34 1/2” High, 18” Deep
One Drawer Front
sVSB241834 BUTT
sVSB271834 (Butt)
sVSB301834 BUTT
sVSB331834 BUTT
sVSB361834 BUTT
sVSB391834 Two Drawer Fronts
sVSB421834
31 1/2” High, 21” Deep One Drawer Front
VSB242131 BUTT
VSB272131 (Butt)
VSB302131 BUTT
VSB332131 BUTT
VSB362131 BUTT
VSB392131 Two Drawer Fronts
VSB422131 34 1/2” High, 21” Deep
One Drawer Front
VSB242134 BUTT
VSB272134 (Butt)
VSB302134 BUTT
VSB332134 BUTT
VSB362134 BUTT
VSB392134 Two Drawer Fronts
VSB422134
• Falsedrawerfront(s) • Noshelf
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝
31 ½˝34 ½˝
18˝, 21˝
VSB24 BUTT-VSB39
VSB42
s Reduce to 18” depth not available
Van
ity
Cabi
nets
G2 Vanity Cabinets
Vanity Sink Base Three Door
31 1/2” High, 18” Deep
sVSB421831 •2
sVSB481831 •2
sVSB541831 •2 34 1/2” High, 18” Deep
sVSB421834 •2
sVSB481834 •2
sVSB541834 •2
31 1/2” High, 21” Deep
VSB422131 •2
VSB482131 •2
VSB542131 •2 34 1/2” High, 21” Deep
VSB422134 •2
VSB482134 •2
VSB542134 •2
• Falsefrontonlybetweendrawers • Twostandarddrawers • Centerdoorishingedright • Spacebetweendrawersforsinkinstallation
is21” • 54”widecabinetshavea3 3/16”widefull-
widthsupportcrossrailacrosstopfrontofcabinet
• Backpanelispre-drilledforRoll-OutTray(ROT)behindcenterdooronVSB54
• Note:Whendepthisreducedto12”or15”,drawersbecomeafalsefront
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
12˝15˝18˝
12˝15˝18˝
18˝18˝18˝
sReduceto18”depthnot available
Vanity Sink Base Four Door
• Falsefrontonlybetweendrawers • Twostandardheighttopdrawers • Doorleftofcenterhingedleft,doorright
ofcenterhingedright • Actualcabinetwidthis59 1/2”,frame
stilesareextendedandmaybetrimmedamaximumof 1/2”eachtoacabinetwidthof58 1/2”
• Spacebetweendrawersforsinkinstallationis31 3/4”
• 3 3/16”widefull-widthsupportcrossrailacrosstopfrontofcabinet
• Note:Whendepthisreducedto12”or15”,drawersbecomeafalsefront
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
sReduceto18”depthnot available
Vanity Sink Base Two Drawer
18” Deep
sVSB361831 •2
sVSB361834 •2 21” Deep
VSB362131 •2
VSB362134 •2
• Falsefrontonlybetweendrawers • Twostandarddrawers • Spacebetweendrawersforsinkinstallation
is18” • Note:Whendepthisreducedto12”or15”,
drawersbecomeafalsefront
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
sReduceto18”depthnot available
Vanity Sink Base Three Drawer
18” Deep
sVSB541831 •3
sVSB601831 •3 21” Deep
VSB542131 •3
VSB602131 •3
• Falsedrawerfrontsaboveeachdoor • Onestandarddrawer • Twodeepdrawers • 3 3/16”widefull-widthsupportcrossrail
acrosstopfrontofcabinet • Openingoneachendforsinkinstallation
is18 7/8”for54”cabinetand21 1/4”for60”cabinet
• ActualcabinetwidthforVSB60is59 1/2”,framestilesareextendedandmaybetrimmedamaximumof 1/2”eachtoacabinetwidthof58 1/2”
• OptionalAccessoryRoll-OutTray(ROT)availableforVSB542131•3cabinetsonly
• Backpanelnotpre-drilled • Note:Whendepthisreducedto12”or15”,
drawersbecomeafalsefront
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝
21˝20 ¾˝
12˝18˝
21˝20 ¾˝
18˝, 21˝ sReduceto18”depthnot available
18” Deep
sVSB601831 •2
sVSB601834 •2 21” Deep
VSB602131 •2
VSB602134 •2
Vanity Cabinets
G3Vanity Cabinets
Vanity Sink Base Four Drawer
18” Deep
sVSB541834 •4
sVSB601834 •4 21” Deep
VSB542134 •4
VSB602134 •4
• Falsedrawerfrontsaboveeachdoor • Threestandarddrawers • Onedeepdrawer • 3 3/16”widefull-widthsupportcrossrail
across top front of cabinet • Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
34 ½˝
21˝20 ¾˝
12˝18˝
21˝20 ¾˝
18˝, 21˝ s Reduce to 18” depth not available
Vanity Combination Drawer (2)
31 1/2” High, 18” Deep
sVCD241831 DL2
sVCD301831 DL2
sVCD361831 DL2 31 1/2” High, 21” Deep
VCD242131 DL2
VCD302131 DL2
VCD362131 DL2
31 1/2” High, 18” Deep
sVCD241831 DR2
sVCD301831 DR2
sVCD361831 DR2 31 1/2” High, 21” Deep
VCD242131 DR2
VCD302131 DR2
VCD362131 DR2
• Onefull-widthdrawerfrontabovedoorand drawers
• Twodeepdrawers • SpecifyDL(DrawerLeft)orDR(Drawer
Right) position for drawers • Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝
s Reduce to 18” depth not available
Vanity Combination Drawer (3)
34 1/2” High, 18” Deep
sVCD241834 DL3
sVCD301834 DL3
sVCD361834 DL3 34 1/2” High, 21” Deep
VCD242134 DL3
VCD302134 DL3
VCD362134 DL3
34 1/2” High, 18” Deep
sVCD241834 DR3
sVCD301834 DR3
sVCD361834 DR3 34 1/2” High, 21” Deep
VCD242134 DR3
VCD302134 DR3
VCD362134 DR3
• Onefull-widthdrawerfrontabovedoorand drawers
• Twostandarddrawers • Onedeepdrawer • SpecifyDL(DrawerLeft)orDR(Drawer
Right) position for drawers • Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18”, 21˝
34 ½˝
s Reduce to 18” depth not available
Van
ity
Cabi
nets
G4 Vanity Cabinets
Vanity Combination Drawer (6)
31 1/2” High, 18” Deep
sVCD421831 •6
sVCD481831 •6
sVCD601831 •6 31 1/2” High, 21” Deep
VCD422131 •6
VCD482131 •6
VCD602131 •6
• Twostandardheighttopdrawersandfourdeep lower drawers
• Drawerfrontonlybetweentopdrawers • VCD42andVCD48centerdoorishinged
right • VCD42andVCD48spacebetweendrawersfor
sink installation is 21” • VCD60spacebetweendrawersforsink
installation is 31 3/4” • VCD60actualcabinetwidthis591/2”,frame
stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• AccessoryRoll-OutTray(ROT)notavailableforVCD60cabinets
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
18˝, 21˝
31 ½˝
VCD42-48
VCD60
28
3 8
3 8
3 4
18˝, 21˝
31 ½˝
12˝15˝
12˝15˝18˝
18˝
s Reduce to 18” depth not available
Vanity Combination Drawer (8)
34 1/2” High, 18” Deep
sVCD421834 •8
sVCD481834 •8
sVCD601834 •8 34 1/2” High, 21” Deep
VCD422134 •8
VCD482134 •8
VCD602134 •8
• Sixstandardheightandtwodeepdrawers • Drawerfrontonlybetweentopdrawers • VCD42andVCD48centerdoorishinged
right • VCD42andVCD48spacebetweendrawers
for sink installation is 21” • VCD60spacebetweendrawersforsink
installation is 31 3/4” • VCD60actualcabinetwidthis591/2”,frame
stiles are extended and may be trimmed a maximum of 1/2” each to a cabinet width of 58 1/2”
• AccessoryRoll-OutTray(ROT)notavailableforVCD60cabinets
• Note: When depth is reduced to 12” or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
21˝
34 ½˝
28
3 8
3 8
3 4
34 ½˝
18˝, 21˝ VCD42-48
VCD60
12˝15˝
12˝15˝18˝
18˝
s Reduce to 18” depth not available
Vanity Cabinets
G5Vanity Cabinets
Vanity Base Single Door
Specify R or L 31 1/2” High, 18” Deep
sVB121831 R or L
sVB151831 R or L
sVB181831 R or L
sVB211831 R or L
sVB241831 R or L 34 1/2” High, 18” Deep
sVB121834 R or L
sVB151834 R or L
sVB181834 R or L
sVB211834 R or L
sVB241834 R or L
Specify R or L 31 1/2” High, 21” Deep
VB122131 R or L
VB152131 R or L
VB182131 R or L
VB212131 R or L
VB242131 R or L 34 1/2” High, 21” Deep
VB122134 R or L
VB152134 R or L
VB182134 R or L
VB212134 R or L
VB242134 R or L
• Onestandarddrawer • Note: When depth is reduced to 12”
or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝
Vanity Base Double Door
31 1/2” High
sVB241831 BUTT
VB242131 BUTT 34 1/2” High
sVB241834 BUTT
VB242134 BUTT
• Onefull-widthdrawer • Note: When depth is reduced to 12”
or 15”, drawers become a false front
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝
s Reduce to 18” depth not available
Vanity Base Full-Height Single Door
Specify R or L 31 1/2” High, 18” Deep
sVB181831 R or L•FH
sVB211831 R or L•FH
sVB241831 R or L•FH 34 1/2” High, 18” Deep
sVB181834 R or L•FH
sVB211834 R or L•FH
sVB241834 R or L•FH
Specify R or L 31 1/2” High, 21” Deep
VB182131 R or L•FH
VB212131 R or L•FH
VB242131 R or L•FH 34 1/2” High, 21” Deep
VB182134 R or L•FH
VB212134 R or L•FH
VB242134 R or L•FH
• Noshelf
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO31 ½˝34 ½˝
18˝, 21˝
s Reduce to 18” depth not available
s Reduce to 18” depth not available
Van
ity
Cabi
nets
G6 Vanity Cabinets
Vanity Base Full-Height Double Door
31 1/2” High, 18” Deep
sVB241831 BUTT•FH
sVB271831 (Butt)•FH
sVB301831 BUTT•FH
sVB331831 BUTT•FH
sVB361831 BUTT•FH
sVB391831 •FH
sVB421831 •FH 34 1/2” High, 18” Deep
sVB241834 BUTT•FH
sVB271834 (Butt)•FH
sVB301834 BUTT•FH
sVB331834 BUTT•FH
sVB361834 BUTT•FH
sVB391834 •FH
sVB421834 •FH
31 1/2” High, 21” Deep
VB242131 BUTT•FH
VB272131 (Butt)•FH
VB302131 BUTT•FH
VB332131 BUTT•FH
VB362131 BUTT•FH
VB392131 •FH
VB422131 •FH 34 1/2” High, 21” Deep
VB242134 BUTT•FH
VB272134 (Butt)•FH
VB302134 BUTT•FH
VB332134 BUTT•FH
VB362134 BUTT•FH
VB392134 •FH
VB422134 •FH
• Noshelf
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝
Vanity Base Full-Height Three Door
31 1/2” High, 18” Deep
sVB481831 •FH
sVB541831 •FH 34 1/2” High, 18” Deep
sVB481834 •FH
sVB541834 •FH
31 1/2” High, 21” Deep
VB482131 •FH
VB542131 •FH 34 1/2” High, 21” Deep
VB482134 •FH
VB542134 •FH
• Noshelf • Centerdoorishingedright
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝ 15˝18˝
18˝18˝
15˝18˝
sReduceto18”depthnot available
Vanity Base Full-Height Four Door
31 1/2” High
sVB601831 •FH
VB602131 •FH 34 1/2” High
sVB601834 •FH
VB602134 •FH
• Full-heightdoors • Noshelf • Actualcabinetwidthis59 1/2”,frame
stilesareextendedandmaybetrimmedamaximumof 1/2”eachtoacabinetwidthof58 1/2”
• Doorleftofcenterhingedleft,doorrightofcenterhingedright
• Traditionaloverlayinnerdoorsare125/8”wideandouterdoorsare131/4”wide.Fulloverlayinnerdoorsareinnerdoorsare14”wideandouterdoorsare145/8”
• 3 3/16”widefull-widthsupportcrossrailacrosstopfrontofcabinet
l PE
l APC
RD9
l RD12
l RD15
I RD18
l CFO
31 ½˝34 ½˝
18˝, 21˝ 14 / ˝ 14 / ˝ 15 / ˝
15 / ˝
sReduceto18”depthnot available
sReduceto18”depthnot available
Vanity Cabinets
G7Vanity Cabinets
Vanity Base Drawer
31 1/2” High, 18” Deep
sVBD121831 •3
sVBD151831 •3
sVBD181831 •3
sVBD211831 •3
sVBD241831 •3 34 1/2” High, 18” Deep
sVBD121834 •3
sVBD151834 •3
sVBD181834 •3
sVBD211834 •3
sVBD241834 •3
31 1/2” High, 21” Deep
VBD122131 •3
VBD152131 •3
VBD182131 •3
VBD212131 •3
VBD242131 •3 34 1/2” High, 21” Deep
VBD122134 •3
VBD152134 •3
VBD182134 •3
VBD212134 •3
VBD242134 •3
• Onestandardheightdrawer • Twodeepdrawers
l PE
l APC
RD9
RD12
RD15
I RD18
l CFO
18˝, 21˝
31 ½˝34 ½˝
Vanity Base Four Drawer
34 1/2” High, 18” Deep
sVBD121834 •4
sVBD151834 •4
sVBD181834 •4
sVBD211834 •4
sVBD241834 •4
34 1/2” High, 21” Deep
VBD122134 •4
VBD152134 •4
VBD182134 •4
VBD212134 •4
VBD242134 •4
• Threestandardheightdrawers • Onedeepdrawer
l PE
l APC
RD9
RD12
RD15
I RD18
l CFO
18˝, 21˝
34 ½˝
sReduceto18”depthnot available
sReduceto18”depthnot available
Van
ity
Cabi
nets
G8 Vanity Cabinets
Vanity Linen Cabinet
Specify R or L 84” High, 18” Deep
sVLC151884 R or L
sVLC181884 R or L
sVLC241884 R or L
sVLC241884 BUTT 90” High, 18” Deep
sVLC151890 R or L
sVLC181890 R or L
sVLC241890 R or L
sVLC241890 BUTT 96” High, 18” Deep
sVLC151896 R or L
sVLC181896 R or L
sVLC241896 R or L
sVLC241896 BUTT
Specify R or L 84” High, 21” Deep
VLC152184 R or L
VLC182184 R or L
VLC242184 R or L
VLC242184 BUTT 90” High, 21” Deep
VLC152190 R or L
VLC182190 R or L
VLC242190 R or L
VLC242190 BUTT 96” High, 21” Deep
VLC152196 R or L
VLC182196 R or L
VLC242196 R or L
VLC242196 BUTT
• Fixedshelfbetweentopandbottomsectionwithadjustableshelvesintopsection:84”high-noshelves;90”and93”high-1shelf;96”high-2shelves
• Interiorheightoftallsectionon84”and96”tallcabinetsis60 15/16”;90”tallis61 7/16”
• 96”highcabinetsincludetoekickplatformshippedunattachedforeasierhandlingandinstallation
• Bottom,talldoorsaretwo-piecepanelconstruction,exceptFlaxtonwhichhasasingleraisedpanelprofile
l PE
l APC
l RD9
l RD12
l RD15
I RD18
l CFO84˝90˝96˝
18˝, 21˝
18˝, 21˝
84˝90˝96˝
VLC15-VLC24
VLC24BUTT
sReduceto18”depthnot available
Vanity Linen Cabinet Short
Specify R or L 18” Deep
sVLC181848 R or L 21” Deep
VLC182148 R or L
• Threeadjustableshelves • Dooristwopiececonstructionexcept
forFlaxtonhashaveasingleraisedcenterpanel
• CabinetdesignedtostackdirectlyonVBD_cabinetsorsitdirectlyoncountertop
• Not intendedasastandalone,singlewallmountcabinet
Caution:Additionalsupportisrequired.Seeinstallationsheetprovidedwithcabinet
l PE
l APC
l RD9
l RD12
l RD15
I RD18
l CFO
48˝
18˝, 21˝
sReduceto18”depthnot available
Vanity Wall Cabinet
Specify R or L
VW1530 R or L
• Threeadjustableshelves • Surfacemount
l PE
l APC
RD9
RD12
RD15
RD18
CFO30˝
15˝4 ¾˝
Vanity Cabinets
G9Vanity Cabinets
Vanity Wall Boutique
VWB2430 BUTT • One adjustable shelf • Exposed full-depth fixed shelf in lower
section • Matching color laminate interior and
shelves • 5” high frame opening in lower section • Cabinet back extends through opening in
lower section • No towel bar
PE
l APC
RD9
RD12
RD15
RD18
CFO30”
7” 24”
Vanity Wall Boutique w/Towel Bar
VWB2648 • Two adjustable shelves • Cabinet includes, 3/4” matching side solid
wood side panels, exposed fixed shelf and matching solid wood towel bar
• 6 7/8” high opening between fixed shelf and cabinet
PE
l APC
RD9
RD12
RD15
RD18
CFO48˝
8˝
25˝
48˝
8˝
25˝Painted door styles
Stained door styles
Mirror Cabinet
MC1627 •PC • Polished chrome finish • Three adjustable 5/8” thick no-tilt shelves
with clear shelf supports • Door is 3/16” thick plate glass mirror with
rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer
• Cabinet can be inverted, magnetic latch must be relocated
• Hinged right • For surface mount or recess installation • Cutout required for recessed installation;
14 1/2” wide, 25 3/4” high, 3 1/2” deep • Mirror door shipped unattached for easier
handling and installation • Mounting hardware included
PE
l APC
RD9
RD12
RD15
RD18
CFO
27˝
4 ¼˝
16˝
Tri-View Mirror
TV2430 •PC
TV3030 •PC
TV3630 •PC
• Polished chrome finish • Three adjustable 5/8” thick no-tilt shelves
with clear shelf supports • Doors are 3/16” thick plate glass mirror
with rounded edges with pivot hinges, magnetic touch latch and vinyl safety backer
• Left and center doors hinged right, right door hinged left to create a three-way reflection
• Vertical divider between center and left hand door in 30” and 36” cabinet
• For surface mount or recess installation • Mirror door shipped unattached for easier
handling and installation • Mounting hardware included
PE
l APC
RD9
RD12
RD15
RD18
CFO
TV2430TV3030TV3630
22 ¾˝28 ¾˝34 ¾˝
28 ¾˝28 ¾˝28 ¾˝
3 ½˝3 ½˝3 ½˝
Cutout dimensions for recessed installation
Item Width Height Depth
30˝
4 ¼˝
Van
ity
Cabi
nets
G10 Vanity Accessories
Vanity Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
MVEP 21 31code width height
Vanity Filler
VF3•31 • 3/4”thicksolidwood • ToeKickincluded,shippedunattached • Backsideoffillernot finished
v C
v M
v O
3˝
31 ½˝
¾˝
Vanity Fluted Filler
VFF3•31 • 3/4”thicksolidwood • Fourflutes • Backsideoffillernot finished
v C
v M
v O
6˝
1 ½˝
3˝
¾˝
31 ½˝
3˝
¾˝/˝
Vanity Hamper Roll-Out
VHRO18 • Whiteepoxycoatedwireframerollsonfull -extension slides, designed for easy removal of basket
• Mountstocabinetfloor • 60-qt.whiteplasticlaundrybasketincluded • Loadratingof30lbs • Installationinstructionsandmounting
hardware included • Offeredasindividualkit • 191/2”highx15”widex19”deep
C
M
O
19 ½˝
19˝
15˝
Vanity Cabinets
G11Vanity Accessories
Matching Vanity End Panel
MVEP2131
MVEP2134 • Providesafinishedfurniturelookto
cabinet • 3/16”thickbasepanelwithmatching
decorative door • Fulloverlaydoorstylesshippedunattachedto
panel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partialoverlaydoorstyles;doorshippedattached to panel
• Forrightorlefthanduse • Fieldinstallationonly • Toespacenotchmust be field cut
v C
v M
v O
Field cutToespace
31 ½˝, 34 ½˝
20 ¼˝
/˝
Item
MVEP2131
MVEP2134
20 ¼˝
20 ¼˝
Width
31 ½˝
34 ½˝
Height
26 ¼˝
29 ¼˝
Height
20 /˝
20 /˝
Width
25˝
28˝
Height
19 ¼˝
19 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
Van
ity
Cabi
nets
G12 Notes
Notes
Office Cabinets
H1Office Cabinets
Office Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Note: Standard office cabinet box depth is 18” or 21” unless stated otherwise. Add door thickness with bumpers for total depth. Standard base desk cabinet height is 29” unless stated otherwise.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - Plywood Ends APC - - - - - All Plywood Construction RD12 - - - - Reduce Depth 12” RD15 - - - - Reduce Depth 15” RD18 - - - - Reduce Depth 18” CFO - - - - - Cabinet Front Only
DKD 30 18code width depth
Desk Door Cabinet – Single
Specify R or L
DDO15 R or L
DDO18 R or L
DDO21 R or L
DDO24 R or L
• Noshelf • Standardheighttopdrawer I Note: When depth is reduced to 12” or 15”,
drawers become a false front
l PE
l APC
I RD12
I RD15
l RD18
l CFO
21˝
29˝
Desk Drawer Cabinet
DDR12
DDR15
DDR18
DDR21
DDR24
• Twostandardheighttopdrawersontop • Onedeepbottomdrawer • 3/4extensionondrawer(s) • Designedtobeusedinconjunctionwith
Desk Knee Drawer (DKD) units
l PE
l APC
RD12
RD15
l RD18
l CFO
21˝
29˝
Offi
ce C
abin
ets
H2 Office Cabinets
Desk File Drawer Cabinet
DFD15
DFD18
DFD21
DFD24
• Standardheighttopdrawer • 3/4extensionontopdrawer • Bottomfiledrawerhasfullextensionside-
mount slides and hanging folder hardware to accommodate letter or legal size folders
• Drawerfrontonbottomdrawerisstyledasadoor
l PE
l APC
RD12
RD15
RD18
CFO
21˝
29˝
Letter or Legal Letter only Letter or Legal Legal only
Letter or Legal Legal onlyLetter or Legal
DFD15
DFD18
DFD21
DFD24
Desk Knee Drawer Cabinet
18” Deep
DKD2418
DKD3018
DKD3618 21” Deep
DKD24
DKD30
DKD36
• Designedforusebetweenbase,desk,vanity, tall cabinets or with desk leg on one end
• Drawerfrontisprofiledonalledges • Fulloverlaydoorstyles;faceframestilesare
not trimmable • Full-widthtoppanelisrecessedforeasier
installation • Requirescountertoporwritingsurface • Drawerfrontsaresolidslab;exceptBellwether
and Rexton • BellwetherandRextondrawerfrontsaresame
constructionasstandardfronts;exceptthestilesandrailsarenarrower(1 1/2”wide)
PE
l APC
RD12
RD15
RD18
l CFO
4 ½˝
24˝ 30˝ 36˝
18˝ 21˝
Desk Knee Drawer Cabinet – Trimmable
18” Deep
DKDT2418
DKDT3018
DKDT3618 21” Deep
DKDT24
DKDT30
DKDT36
• Designedforusebetweenbase,desk,vanity, tall cabinets or with desk leg on one end
• Drawerfrontisprofiledonalledges • Faceframeincludes 11/16”tallbottomrailfor
added strength • Full-widthtoppanelisrecessedforeasier
installation • Requirescountertoporwritingsurface • Maybetrimmedupto3”oneachside • Drawerfrontsaresolidslab;exceptBellwether
and Rexton • BellwetherandRextondrawerfrontsaresame
constructionasstandardfronts;exceptthestilesandrailsarenarrower(1 1/2”wide)
PE
l APC
RD12
RD15
RD18
l CFO
5 /˝
18˝ 21˝
24˝ 30˝ 36˝
Office Cabinets
H3Office Accessories
Office Accessories Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
C - - - Cherry M - - - Maple O - - - Oak
DEP 24 31code depth height
Organizer
O24
O30
O36
• Forusebeneathwallcabinetsoropenshelves
• Matchingwoodveneerinteriorandexteriorsurfaces
• Includesamatchingsolidwoodstripateachend to align with wall cabinet frame above when stacked
v C
v M
v O
12˝6˝
24˝
6˝
6˝
12˝ 30˝
12˝ 36˝
Desk End Panel
DEP2431 • Fieldcuttocorrectheightwhereapplicable
• UsedtosupportendofDeskKneeDrawer(DKD)orDeskKneeDrawerTrimmable(DKDT).Fitsbehindextendedframestile
• AvailableinAllPlywoodConstruction(APC)
v C
v M
v O
5 /˝
31 ½˝
23 ¼˝
¾˝
Offi
ce C
abin
ets
H4 Office Accessories
Matching Desk End Panel
MDEP • Providesafinishedfurniturelooktocabinet
• 3/16”thickbasepanelwithmatchingdecorative door
• Fulloverlaydoorstylesshippedunattachedtopanel. When installed, door overlaps cabinet frame edge to provide matching reveals
• Partialoverlaydoorstyles;doorshippedattached to panel
• Forrightorlefthanduse • Fieldinstallationonly • Toespacenotchmustbefieldcut
v C
v M
v O
Field cutToespace
20 ¼˝
29˝/˝
Item
MDEP 20 ¼˝
Width
29˝
Height
23 ¾˝
Height
20 /˝
Width
22 ½˝
Height
19 ¼˝
Width
Panel Size
Full Overlay
PartialOverlay
Furniture Cabinets
I1Furniture Accessories
Furniture Accessories
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
FEP 21 53 •CEcode depth height suffix
Furniture Component Design Idea
FSTBFTBV
FEP
VB30B30
FS/FS.HD
FSTBFTBV
FEP
FS/FS.HD
FS
W3030
FSTBFTBV
FEP.CE
Sample Component Configuration
• These units are not to be used free-standing.• Units must be attached to a wall for proper support.
Furniture End Panels
53 1/2” High
FEP1353
FEP2153 84” High
FEP1384
FEP2184
• 3/4”thickengineeredwood • FurnitureEndPanelsareboredonesidefor
adjustable shelves, tops, bottoms, hanger rails and valances
• 53 1/2”FurniturePanelsareformountingondesk cabinets or panels and can be trimmed to48”formountingonkitchenbasecabinets
• 84”FurniturePanelsareforfloormountedinstallation
• Frontandbackedgesfinished • Cherry,Maple,andOakdoorstyleshave
wood veneer surfaces, except Brie and Meringue which will have matching laminate surfaces
v C
v M
v O
53 ½˝ 84˝
13˝ , 21˝
Furn
itur
e Ca
bine
ts
I2 Furniture Accessories
Furniture End Panel – Center Drilled
53 1/2” High
FEP1353 •CE
FEP2153 •CE 84” High
FEP1384 •CE
FEP2184 •CE
• 3/4”thickengineeredwood • FurnitureEndPanel–CenterDrilledisbored
on both sides for adjustable shelves, tops, bottoms, hanger rails and valances
• 53 1/2”FurniturePanelsareformountingondesk cabinets or panels and can be trimmed to48”formountingonkitchenbasecabinets
• 84”FurniturePanelsareforfloormountedinstallation
• Frontandbackedgesfinished • Cherry,Maple,andOakdoorstyleshave
wood veneer surfaces, except Brie and Meringue which will have matching laminate surfaces
v C
v M
v O
53 ½˝ 84˝
13˝ , 21˝
Furniture Shelves
13” Deep
FS1813
FS3013
FS3613
FS1384 21” Deep
FS1821
FS3021
FS3621
FS2184
• 3/4”thickengineeredwood • Shelfloadratingof15lbs.persquarefoot,not
toexceed50lbs. • 13”deepforbooksanddecorativeaccessories • 21”deepforelectronics • Frontandbackedgesfinished • Trimmedtofitinstallation • Shelfsupportsnot included • Cherry,Maple,andOakdoorstyleshave
wood veneer surfaces, except Brie and Meringue which will have matching laminate surfaces
Forheavy-dutyapplicationslikesupporting a television use heavy duty shelves
v C
v M
v O
13˝, 21˝ 18˝, 30˝, 36˝, 84˝
Furniture Shelves – Heavy-Duty
13” Deep
FS3013 •HD
FS3613 •HD 21” Deep
FS3021 •HD
FS3621 •HD
• 3/4”thickengineeredwood • Additionalsupportrequired • Reinforcedandwillsupport30lbs.persquare
foot. • Frontandbackedgesfinished • Includesfourshelfsupports • Cherry,Maple,andOakdoorstyleshave
wood veneer surfaces, except Brie and Meringue which will have matching laminate surfaces
v C
v M
v O
13˝21˝
30˝, 36˝
¾˝ thick
Furniture Cabinets
I3Furniture Accessories
Furniture Shelves – Top and Bottom
18” Deep
FSTB1813
FSTB3013
FSTB3613 21” Deep
FSTB1821
FSTB3021
FSTB3621
• 3/4”thickengineeredwood • Frontandbackedgesfinished • Includes:shelf,hangerrail(toattachtowall)
and cam lock fastener • Cherry,Maple,andOakdoorstyleshave
wood veneer surfaces, except Brie and Meringue which will have matching laminate surfaces
FurnitureTopandBottomShelvesarerequiredformodularshelvingsystem
v C
v M
v O
18˝, 30˝ 36˝13˝, 21˝
Furniture Toeboard Valance
FTBV18
FTBV30
FTBV36
• AttachesbetweenuprightsontheundersideofFurnitureShelvesTopandBottom(FSTB)fordecorativeeffectandtostabilize units
• Cherry,MapleandOakare 3/4”solidwoodand have a traditional furniture shape on bottom
• BrieandMeringueare3/4”engineeredwoodwith matching laminate surfaces and straight finishedbottomedge
v C
v M
v O
18˝ 30˝ 36˝4 ¼˝
Furn
itur
e Ca
bine
ts
I4 Notes
Notes
Panels-Shelving-Trays
J1Paneling
Paneling Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
WSK 96 48 •2code width height suffix
Wood Veneer Paneling
WSK1230 11 1/4” x 30” x 3/16”
WSK1530 14 1/4” x 30” x 3/16”
WSK2434 23 1/4” x 34 1/2” x 3/16”
WSK4834 48 x 34 1/2” x 3/16”
WSK1242 11 1/4” x 42” x 3/16”
WSK1542 14 1/4” x 42” x 3/16”
WSK9648 96” x 48” x 3/16”
WSK9648 •2 96” x 48” x 3/16”
WSK2484 23 1/4” x 84” x 3/16”
WSK2484 •2 23 1/4” x 84” x 3/16”
WSK2496 23 1/4” x 96” x 3/16”
WSK2496 •2 23 1/4” x 96” x 3/16”
WSK4896 48” x 96” x 3/16”
WSK4896 •2 48” x 96” x 3/16”
• Veneered plywood panel finished on one side
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
v C
v M
v O
StandardGrain Panel
CrossGrain Panel
Woodgrain Laminate Paneling
I VSK4834 48” x 34 1/2” x 3/16”
VSK4896 48” x 96” x 3/16”
VSK4896 •2 48” x 96” x 3/16”
• Medium Density Fiberboard (MDF) panel with easy clean laminate on front side and unfinished backside
• Use to cover exposed backs of base and tall cabinets in peninsula or island configurations
I C
v M
I O
I Only available in Maple
Pane
ls-S
helv
ing-
Tray
s
J2 Paneling
Beaded Paneling
BEPL4834 48” x 34 1/2” x 3/16”
BEPL4896 48” x 96” x 3/16”
• 3/16” thick veneered plywood panel • Can be used as wainscoting or to cover
exposed backs of base and tall cabinets in peninsula and island configurations
• Finished one side only
v C
v M
v O
Grain Direction
48˝
34 ½˝or
96˝
/˝
CoreGuard® Panel Backer
CGPB36 • Light beige engineered polymer • Used to patch backs of CoreGuard® cabinets
C
M
O
34 /˝
26 /˝
/˝
Panels-Shelving-Trays
J3Shelving
Shelving Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
C - - - Cherry M - - - Maple O - - - Oak
SK 18 12code width depth
Shelf Kits
Engineered Wood 12” Deep
I SK1512
I SK1812
I SK2412 21” Deep
I SK1521
I SK1821
I SK2421 24” Deep
I SK1524
I SK1824
I SK2424
Plywood 12” Deep
SK3012
SK3612 24” Deep
SK3024
SK3624
• 3/4” shelves laminated on both sides • Edge banded on long edge, except SK30 and
SK36 • SK30 and SK36 include back support • Kit includes: five shelves, 20 clear supports, 30”
and 36” wide shelf kits also include five clear back supports
C
M
O
I Available in All Plywood Construction (APC)
Pane
ls-S
helv
ing-
Tray
s
J4 Roll-out Trays
Roll-out Trays Construction Options and Modifications
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
ROT 15 •24code width depth
Roll-out Trays Double Faced - Field Installation
ROT18 •24•DF
ROT21 •24•DF
ROT24 •24•DF
ROT27 •24•DF
ROT30 •24•DF
• Tray front and back are made of solid hardwood; tray sides and bottom panel are made of engineered wood covered with a moisture and stain resistant, easy to clean laminate. Top edges of sides finished with matching edge banding
• Installs in Peninsula Base (PB) cabinets only using pre -drilled holes in face frames
• Mounting hardware and runners included • 3/4 extension runners • Natural finish • Example: For PB21—order ROT21•24•DF For PB24 BUTT—order ROT24•24•DF For PB30 BUTT—order ROT30•24•DF
ROT24 •24•DF 20 3/4" PB24, PB24 BUTT
Item Tray Width For Use In:
ROT18 •24•DF 14 3/4" PB18ROT21 •24•DF 17 3/4" PB21
ROT27 •24•DF 23 3/4" PB27
ROT30 •24•DF 26 3/4" PB30 BUTT
Panels-Shelving-Trays
J5Roll-out Trays
Deep Roll-out Trays - Field Installation
DROT12 •24
DROT14 •24
DROT15 •24
DROT16 •24
DROT18 •24
DROT19 •24
DROT21 •24
DROT22 •24
DROT24 •24
DROT27 •24
DROT30 •24
DROT33 •24
DROT36 •24
• Installs in base, vanity, and and utility cabinets only using pre -drilled holes in back panel
• 24” depth only • Mounting hardware and runners included • Natural finish • 3/4 extension runners • Trays are made of 1/2” thick solid hardwood;
bottoms are .205” thick matching wood grain printed plywood
• Example: For B12•FH—order DROT12•24 For PB21—order DROT21•24 For BBC42—order DROT14•24
Deep Roll-out Trays – Full Extension Field Installation
DROTFX30 •24
DROTFX33 •24
DROTFX36 •24
• Installs in base cabinets with butt doors using pre -drilled holes in back panel and most face frames; rear mounting brackets included for installing in peninsula base cabinets
• 24˝ depth only • Trays are made of 1/2” thick solid hardwood;
bottoms are .205” thick matching wood grain printed plywood
• 3 3/16” interior height along sides • 1 15/16” deep finger pull at midpoint of tray
front • Unit slides on full extension side -mount ball
bearing runners • Mounting hardware and runners included • Natural finish • Example: For SB30 BUTT•W—order DROTFX30•24 For B33 BUTT—order DROTFX33•24 For UB36 BUTT—order DROTFX36•24
Item Tray Width For Use In:
DROTFX30 •24 25 13/16" B30 BUTT, B30 BUTT•FH, PB30 BUTT, SB30 BUTT, SB30 BUTT•FH, UB30 BUTT, UB30 BUTT•FHDROTFX33 •24 28 13/16" B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHDROTFX36 •24 31 13/16" B36 BUTT, B36 BUTT•FH, PB36 BUTT, SB36 BUTT, SB36 BUTT•FH, UB36 BUTT, UB36 BUTT•FH
Item Tray Width For Use In:
DROT12 •24 8" B12, B12•FH, BCD24DL/R-4D, SB12, UB12, UB12•FHDROT14 •24 9 1/2" BBC42DROT15 •24 11" B15, B15•FH, BCD30DL/R-4D, DSB30, SB15, U152484, U152490, U152493, U152496, UB15, UB15•FHDROT16 •24 12 1/2" BBC45, DSB33DROT18 •24 14" B18, B18•FH, B54, BCD36DL/R-4D, DSB36, SB18, U182484, U182490, U182493, U182496, UB18, UB18•FHDROT19 •24 15 1/2" B39, B39•FH, BBC48, SB39, SB39•FH, UB39•FHDROT21 •24 17" B21, B21•FH, B42, B42•FH, SB21, SB42, SB42•FH, UB21, UB42, UB42•FHDROT22 •24 18 1/2" B45, B45•FH, BBC51, UB45•FHDROT24 •24 20" B24, B24 BUTT, B24•FH, B24 BUTT•FH, B48, B48•FH, PBBC27, PBBC27 BUTT, SB24, SB24 BUTT, SB24•FH, SB24 BUTT•FH, SB48, SB48•FH, U242484, U242484 BUTT, U242490, U242490 BUTT, U242493, U242493 BUTT, U242496, U242496 BUTT, UB24, UB24 BUTT, UB24•FH, UB24 BUTT•FH, UB48•FH, UBT24 BUTTDROT27 •24 23" B27, B27•FH, SB27, SB27•FH, UB27, UB27•FHDROT30 •24 26" B30 BUTT, B30 BUTT•FH, SB30 BUTT, SB30 BUTT•FH, U302484 BUTT, U302490 BUTT, U302493 BUTT, U302496 BUTT, UB30 BUTT, UB30 BUTT•FHDROT33 •24 29" B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHDROT36 •24 32" B36 BUTT, B36 BUTT•FH, SB36 BUTT, SB36 BUTT•FH, U362484 BUTT, U362490 BUTT, U362493 BUTT, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH
Pane
ls-S
helv
ing-
Tray
s
J6
Pane
ls-S
helv
ing-
Tray
s
J6J6 Roll-out Trays
Roll-out Trays - Field Installation
18” Deep TraysROT12 •18ROT15 •18ROT18 •18ROT24 •18ROT27 •18ROT30 •18ROT33 •18ROT36 •18
21” Deep Trays ROT12 •21ROT15 •21ROT16 •21ROT18 •21ROT21 •21ROT27 •21ROT30 •21ROT33 •21ROT36 •21
24” Deep TraysROT9 •24ROT12 •24ROT14 •24ROT15 •24ROT16 •24ROT18 •24ROT19 •24ROT21 •24ROT22 •24ROT24 •24ROT27 •24ROT30 •24ROT33 •24ROT36 •24
• Installs in base, vanity, and and utility cabinets only using pre -drilled holes in back panel
• 18”, 21” and 24” depths only • Mounting hardware and runners included • Natural finish • Example: For BBC39—order ROT9•24 For B12—order ROT12•24 For B18•FH—order ROT18•24 For U302496 BUTT—order ROT30•24
Determine the location of plumbing and other obstructions before ordering tray kits
Item (by depth) Tray Width For Use In: 18” depth
21” depth
24” depth
ROT12 •18 8 3/4” VB121831, VB121834, VCD241831 DL2/DR2, VCD241834 DL3/DR3, VSB421831•2, VSB421834•2ROT15 •18 11 3/4" VB151831, VB151834, VB481831•FH, VB481834•FH, VCD301831 DL2/DR2, VCD301834 DL3/DR3, VSB481831•2, VSB481834•2, VSB601831•2, VSB601834•2ROT18 •18 14 3/4" VB181831, VB181831•FH, VB181834, VB181834•FH, VB541831•FH, VB541834•FH, VCD361831 DL2/DR2, VCD361834 DL3/DR3, VCD421834•8, VCD481834•8, VSB361831•2, VSB361834•2, VSB541831•2, VSB541834•2ROT24 •18 20 3/4" VB241831, VB241831 BUTT, VB241831 BUTT•FH, VB241831•FH, VB241834, VB241834 BUTT, VB241834BUTT•FH, VB241834•FH, VSB241831 BUTT, VSB241834 BUTTROT27 •1823 3/4" VB271831•FH, VB271834•FH, VSB271831, VSB271834ROT30 •18 26 3/4" VB301831 BUTT•FH, VB301834 BUTT•FH, VSB301831 BUTT, VSB301834 BUTTROT33 •18 29 3/4" VB331831 BUTT•FH, VB331834 BUTT•FH, VSB331831 BUTT, VSB331834 BUTTROT36 •18 32 3/4" VB361831 BUTT•FH, VB361834 BUTT•FH, VSB361831 BUTT, VSB361834
ROT12 •21 8 3/4" VB122131, VB122134, VCD242131 DL/R2, VCD242134 DL/R3, VSB422131•2, VSB422134•2ROT15 •21 11 3/4" VB152131, VB152134, VB482131•FH, VB482134•FH, VB602131•FH, VB602134•FH, VCD302131 DL/R2, VCD302134 DL/R3, VLC152184, VLC152190, VLC152196, VSB482131•2, VSB482134•2, VSB602131•2, VSB602134•2ROT18 •21 14 3/4" VB182131, VB182131•FH, VB182134, VB182134•FH, VB542131•FH, VB542134•FH, VCD362131 DL/R2, VCD362134 DL/R3, VCD422134•8, VCD482134•8, VLC182184, VLC182190, VLC182196, VSB362131•2, VSB362134•2, VSB422131•2, VSB422134•2, VSB482131•2, VSB482134•2, VSB542131•2, VSB542134•2ROT21 •21 17 3/4" VB212131, VB212131•FH, VB212134, VB212134•FH, VB422131•FH, VB422134•FH, VSB422131, VSB422134ROT27 •21 23 3/4" VB272131•FH, VB272134•FH, VSB272131 BUTT, VSB272134ROT30 •21 26 3/4" VB302131 BUTT•FH, VB302134 BUTT•FH, VSB302131 BUTT, VSB302134 BUTTROT33 •21 29 3/4" VB332131 BUTT•FH, VB332134 BUTT•FH, VSB332131 BUTT, VSB332134 BUTTROT36 •21 32 3/4" VB362131 BUTT,•FH, VB362134 BUTT•FH, VSB362131 BUTT, VSB362134 BUTT
ROT9 •24 7 1/4" BBC39ROT12 •24 8 3/4" B12, B12•FH, BCD24DL/R-4D, SB12, UB12, UB12•FHROT14 •24 10 1/4" BBC42ROT15 •24 11 3/4" B15, B15•FH, BCD30DL/R-4D, DSB30, SB15, U152484, U152490, U152493, U152496, UB15, UB15•FHROT16 •24 13 1/4" BBC45, DSB33ROT18 •24 14 3/4" B18, B18•FH, B54, BCD36DL/R-4D, DSB36, SB18, U182484, U182490, U182493, U182496, UB18, UB18•FHROT19 •24 16 1/4" B39, B39•FH, BBC48, SB39, SB39•FH, UB39•FHROT21 •24 17 3/4" B21, B21•FH, B42, B42•FH, SB21, SB42, SB42•FH, UB21, UB42, UB42•FHROT22 •24 19 1/4" B45, B45•FH, BBC51, UB45•FHROT24 •24 20 3/4" B24, B24 BUTT, B24•FH, B24 BUTT•FH, B48, B48•FH, PBBC27, PBBC27 BUTT, SB24, SB24 BUTT, SB24•FH, SB24 BUTT•FH, SB48, SB48•FH, U242484, U242484 BUTT, U242490, U242490 BUTT, U242493, U242493 BUTT, U242496, U242496 BUTT, UB24, UB24 BUTT, UB24•FH, UB24 BUTT•FH, UB48•FH, UBT24 BUTTROT27 •24 23 3/4" B27, B27•FH, SB27, SB27•FH, UB27, UB27•FHROT30 •24 26 3/4" B30 BUTT, B30 BUTT•FH, SB30 BUTT, SB30 BUTT•FH, U302484 BUTT, U302490 BUTT, U302493 BUTT, U302496 BUTT, UB30 BUTT, UB30 BUTT•FHROT33 •24 29 3/4" B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHROT36 •24 32 3/4" B36 BUTT, B36 BUTT•FH, SB36 BUTT, SB36 BUTT•FH, U362484 BUTT, U362490 BUTT, U362493 BUTT, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH
Panels-Shelving-Trays
J7
Panels-Shelving-Trays
J7
Roll-out Trays Solid Wood - Field Installation
18” Deep Trays
ROTW15 •18
ROTW18 •18
ROTW27 •18
ROTW30 •18
21” Deep Trays
ROTW12 •21
ROTW15 •21
ROTW18 •21
ROTW21 •21
ROTW24 •21
ROTW27 •21
ROTW30 •21
ROTW33 •21
ROTW36 •21
24” Deep Trays
ROTW12 •24
ROTW15 •24
ROTW16 •24
ROTW18 •24
ROTW19 •24
ROTW21 •24
ROTW22 •24
ROTW24 •24
ROTW27 •24
ROTW30 •24
ROTW33 •24
ROTW36 •24
• .205” thick plywood bottom panel finished on the top side with a moisture and stain resistant, easy clean laminate with printed matching wood grain
• Installs in base and vanity cabinets utilizing pre -drilled holes in the back panel and some face frames
• Solid hardwood tray core with 3/4” thick front and 1/2” thick sides and back
• Mounting hardware and runners included • Determine location of plumbing before
ordering tray(s) • 3/4 extension runners • Example:
xFor VB152131—order ROTW15•21 For VLC181884—order ROTW18•18 For B27 (Butt)—order ROTW27•24 • Natural finish
Roll-out Trays
Item (by depth) Tray Width For Use In: 18” depth
21” depth
24” depth
ROTW12 •21 8 3/4" VB122131, VB122134, VCD242131 DL/R2, VCD242134 DL/R3, VSB422131•2, VSB422134•2ROTW15 •21 11 3/4" VB152131, VB152134, VB482131•FH, VB482134•FH, VB602131•FH, VB602134•FH, VCD302131 DL/R2, VCD302134 DL/R3, VLC152184, VLC152190, VLC152196, VSB482131•2, VSB482134•2, VSB602131•2, VSB602134•2ROTW18 •21 14 3/4" VB182131, VB182131•FH, VB182134, VB182134•FH, VB542131•FH, VB542134•FH, VCD362131 DL/R2, VCD362134 DL/R3, VCD422134•8, VCD482134•8, VLC182184, VLC182190, VLC182196, VSB362131•2, VSB362134•2, VSB422131•2, VSB422134•2, VSB482131•2, VSB482134•2, VSB542131•2, VSB542134•2ROTW21 •21 17 3/4" VB212131, VB212131•FH, VB212134, VB212134•FH, VB422131•FH, VB422134•FH, VSB422131, VSB422134ROTW24 •21 20 3/4" VB242131, VB242131 BUTT, VB242131 BUTT•FH, VB242131•FH, VB242134, VB242134 BUTT, VB242134 BUTT•FH, VB242134•FH, VLC242184, VLC242184 BUTT, VLC242190, VLC242190 BUTT, VLC242196, VLC242196 BUTT, VSB242131 BUTT, VSB242134 BUTTROTW27 •21 23 3/4" VB272131•FH, VB272134•FH, VSB272131 BUTT, VSB272134ROTW30 •21 26 3/4" VB302131 BUTT•FH, VB302134 BUTT•FH, VSB302131 BUTT, VSB302134 BUTTROTW33 •21 29 3/4" VB332131 BUTT•FH, VB332134 BUTT•FH, VSB332131 BUTT, VSB332134 BUTTROTW36 •21 32 3/4" VB362131 BUTT,•FH, VB362134 BUTT•FH, VSB362131 BUTT, VSB362134 BUTT
ROTW12 •24 8 3/4" B12, B12•FH, BCD24DL/R-4D, SB12, UB12, UB12•FHROTW15 •24 11 3/4" B15, B15•FH, BCD30DL/R-4D, DSB30, SB15, U152484, U152490, U152493, U152496, UB15, UB15•FHROTW16 •24 13 1/4" BBC45, DSB33ROTW18 •24 14 3/4" B18, B18•FH, B54, BCD36DL/R-4D, DSB36, SB18, U182484, U182490, U182493, U182496, UB18, UB18•FHROTW19 •24 16 1/4" B39, B39•FH, BBC48, SB39, SB39•FH, UB39•FHROTW21 •24 17 3/4" B21, B21•FH, B42, B42•FH, SB21, SB42, SB42•FH, UB21, UB42, UB42•FHROTW22 •24 19 1/4" B45, B45•FH, BBC51, UB45•FHROTW24 •24 20 3/4" B24, B24 BUTT, B24•FH, B24 BUTT•FH, B48, B48•FH, PBBC27, PBBC27 BUTT, SB24, SB24 BUTT, SB24•FH, SB24 BUTT•FH, SB48, SB48•FH, U242484, U242484 BUTT, U242490, U242490 BUTT, U242493, U242493 BUTT, U242496, U242496 BUTT, UB24, UB24 BUTT, UB24•FH, UB24 BUTT•FH, UB48•FH, UBT24 BUTTROTW27 •24 23 3/4" B27, B27•FH, SB27, SB27•FH, UB27, UB27•FHROTW30 •24 26 3/4" B30 BUTT, B30 BUTT•FH, SB30 BUTT, SB30 BUTT•FH, U302484 BUTT, U302490 BUTT, U302493 BUTT, U302496 BUTT, UB30 BUTT, UB30 BUTT•FHROTW33 •24 29 3/4" B33 BUTT, B33 BUTT•FH, SB33 BUTT, SB33 BUTT•FH, UB33 BUTT, UB33 BUTT•FHROTW36 •24 32 3/4" B36 BUTT, B36 BUTT•FH, SB36 BUTT, SB36 BUTT•FH, U362484 BUTT, U362490 BUTT, U362493 BUTT, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH, U362496 BUTT, UB36 BUTT, UB36 BUTT•FH
ROTW15 •18 11 3/4" VB151831, VB151834, VB481831•FH, VB481834•FH, VCD301831 DL2/DR2, VCD301834 DL3/DR3, VSB481831•2, VSB481834•2, VSB601831•2, VSB601834•2ROTW18 •18 14 3/4" VB181831, VB181831•FH, VB181834, VB181834•FH, VB541831•FH, VB541834•FH, VCD361831 DL2/DR2, VCD361834 DL3/DR3, VCD421834•8, VCD481834•8, VSB361831•2, VSB361834•2, VSB541831•2, VSB541834•2 VSB481834•2, VSB601831•2, VSB601834•2ROTW27 •18 23 3/4" VB271831•FH, VB271834•FH, VSB271831, VSB271834ROTW30 •18 26 3/4" VB301831 BUTT•FH, VB301834 BUTT•FH, VSB301831 BUTT, VSB301834BUTT
Pane
ls-S
helv
ing-
Tray
s
J8
NotesPa
nels
-She
lvin
g-Tr
ays
J8
Decorative Enhancem
ents
K1Supports and Valances
Supports and Valances
Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
C - - - Cherry M - - - Maple O - - - Oak
V 36 08code width height
Countertop Support
CTS • Solidwood • Verticalwoodgrain • Forusewhenextrasupportforshelvesor
overhanging countertop is required • Includes2recessedmetalkeyholebrackets
installed on backside • Mountinghardwareincluded • Soldinpairs
v C
v M
v O9"
9"
1"
Valance Traditional
V48 T
V72 T
V96 T
• Solidwood • Forusebetweenwallcabinetsoverwindows
as a panel to conceal light fixtures • Frontandbacksidesarefinished • Profilededge • Backsidenot intended to be viewed
v C
v M
v O
48˝ 72˝ 96˝
4 ¼˝
90°
¾˝
Valance Shaker
5 1/2” High
V18 SH
V24 SH
V30 SH
V36 SH
V42 SH
V48 SH
V60 SH
V72 SH
V84 SH
8” High
V1808 SH
V2408 SH
V3008 SH
V3608 SH
V4208 SH
V4808 SH
V6008 SH
V7208 SH
V8408 SH
• 3/4”thicksolidwood • Forusebetweenwallcabinetsover
windows as a panel to conceal light fixtures
• Backsidenot intended to be viewed • Finishedonbothsides • Nodecorativeprofilealongeitherlongedge • Canbetrimmedinfield1 1/2”eachend
v C
v M
v O
5 ½˝8˝
1 ½˝
3 /˝
3˝5 ½
Valance Raised Panel
V30 RP
V36 RP
V42 RP
V48 RP
• Solidwoodraisedcenterpanelswithcoveprofile
• 3/4”thicksolidwoodstilesandrails • Forusebetweenwallcabinetsoverwindows
as a panel to conceal light fixtures • Finishedonbothsides • Canbetrimmedinfield2”eachend
v C
v M
v O
10˝
2 ½˝2 ¾˝
Dec
orat
ive
Enha
ncem
ents
K2 Moldings
Moldings Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
C - - - Cherry M - - - Maple O - - - Oak
ACM 8 •UFcode length suffix
Angle Crown Molding
Finished
ACM8 Unfinished
ACM8 •UF
• Solidwood • Allowsufficientspacebetweentopofcabinet
andsoffitorceilingtoaccommodatemolding • Installsdirectlytotopofcabinet • Offeredinindividual8’lengths
v C
v M
v O
¾˝
¾˝
3 /˝ 1 /˝
/˝
2 /˝ 33°
Classic Crown Molding
CCM8
CCM •SW10 • Solidwood • Allowsufficientspacebetweentopofcabinet
andsoffitorceilingtoaccommodatemolding • Backsnot finished • IncludesrecessfortheapplicationofDentil
Molding(DM8),SingleBeadRoundEdge(SBRE8),RopeMolding(RM8),WindmereRopeMolding(WRM8),orTapestryInsertMolding(TIM8)
• Offeredinindividual8’and10’lengths
v C
v M
v O
2 /˝
2 /˝
Contemporary Crown Molding
CTC8
CTC •SW10 • Solidwood • Allowsufficientspacebetweentopofcabinet
andsoffitorceilingtoaccommodatemolding • Backsnot finished • Offeredinindividual8’and10’lengths
v C
v M
v O2 /˝
2 /˝
Crown Molding
CM8
CM •SW10 • Solidwood • Allowsufficientspacebetweentopofcabinet
andsoffitorceilingtoaccommodatemolding • Backsnot finished • Offeredinindividual8’and10’lengths
v C
v M
v O
1 ½˝
2 ¼˝
Decorative Enhancem
ents
K3Moldings
Soffit Crown Molding
SCM8
SCM •SW10 • Solidwood • Allowsufficientspacebetweentopofcabinet
andsoffitorceilingtoaccommodatemolding • Backsnot finished • Offeredinindividual8’and10’lengths
v C
v M
v O1 /˝
1 /˝
Small Starter Molding
STR8 • Solidwood • Usedattopofwallandtallcabinetstoallow
attachmentofcrownmoldingorasafillerbetweencabinetandceiling/soffit
• Shippedinonepiece • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
¾˝
3˝
3˝
/˝ Radius
/˝ Radius
Large Starter Molding
LSTR8 • Solidwood • Usedattopofwallandtallcabinetstoallow
attachmentofcrownmoldingorasafillerbetweencabinetandceiling/soffit
• Shippedinonepiece • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
¾˝
3˝
6˝
/˝ Radius/˝ Radius
Angled Outside Corner Molding
AOSC8 • Solidwood • Usedtocoverjointwhentwopanelsmeetat
135° • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
135°
¾˝ ¾˝
1 /˝ /˝ /˝
Inside Corner Molding
ICM8 • Solidwood • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
¾˝
Dec
orat
ive
Enha
ncem
ents
K4 Moldings
Outside Corner Molding
OSC8 • Solidwood • Usedtofinishoutsidecornerwheretwo
panelsmeetat90° • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
1˝
¼˝
¼˝
1˝
Chair Rail
CR8 • Solidwood • Backsnot finished • Canalsobeusedasacountertopnosing • Offeredinindividual8’lengths
v C
v M
v O½˝
1 ½˝
Countertop Wood Edge
CTWE8 • Solidwood • Usedascountertopnosing • Canbeusedunderwallcabinetstoconceal
light fixtures • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
/˝
/˝
1 ½˝
Inset Light Rail
ILR8 • Solidwood • Canbeusedunderwallcabinetstoconceal
light fixtures • Includesa1 13/16”wideflatrecesssothat
itcanbecombinedwithother 3/4”widedecorativemoldingssuchasRopeMolding(RM8)andTripleBeadedEdging(TBE8)
• Allsurfacesfinished • Offeredinindividual8’lengths
v C
v M
v O¾˝
¾˝
/˝
1 /˝ 1/˝
/˝
/˝
/˝
¾˝
1 /˝
/˝
1 /˝
/˝
Narrow Batten Molding
NBM8 • Solidwood • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v ORadius /˝
Radius /˝
¼˝
¾˝
Decorative Enhancem
ents
K5Moldings
Radius Cabinet Molding
RCM8 • Solidwood • Usedasdecorativemoldingaboveorbelow
wall cabinets. Can also be used to conceal light fixtures
• Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
/˝ 1 ½˝
2 ½˝
Single Bead Round Edge
SBRE8 • Solidwood • Backsnot finished • Usedtotrimthefrontedgeofpanels.Can
alsobecombinedwithClassicCrownMolding(CCM8)andInsetLightRail(ILR8)
• Offeredinindividual8’lengths
v C
v M
v O
¾˝
½˝
Triple Bead Edging
TBE8 • Solidwood • Backsnot finished • Usedtotrimfrontedgeofpanelsorcombined
withClassicCrownMolding(CCM8)orInsetLightRail(ILR8)
• Offeredinindividual8’lengths
v C
v M
v O
¾˝
½˝
¼˝
Library Molding
LM8 • Solidwood • Includesa1 9/16”wideflatrecesssothat
itcanbecombinedwithotherdecorativemoldings
• Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
¼˝
½˝
1 /˝
/ ̋
2 /˝
Mirror Molding
MM8 • Solidwood • Usedtotrimandsupportmirrorglasses • Canbeusedwith 1/8”or 1/4”thickmirror
glassorpictureframing. 1/8”mirrorglassrequires 1/8”masonitebacker
• Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
¾˝
2 /˝
½˝
¼˝
Dec
orat
ive
Enha
ncem
ents
K6 Moldings
Under Cabinet Molding
UCM8 • Solidwood • Canbeusedunderwallcabinetstoconceal
light fixtures • Profilecomplementsdoorstyles • Allsurfacesfinished • CanbecombinedwithWoodVeneerPaneling
(WSK)tocreateaflushcolor-matchedunderside
• Offeredinindividual8’lengths
v C
v M
v O
¼˝
2 /˝
¾˝
½˝
Quarter Round Molding
QR8 • Solidwood • Canbeusedtotrimbetweentoekickand
floor • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
Radius /˝
/˝
/˝
Scribe Cove Molding
SCV8 • Solidwood • Allowsufficientspacebetweentopofcabinet
andsoffitorceilingtoaccommodatemolding • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O
/˝
½˝
Scribe Molding
Solid wood
SM8 Paper wrapped
I SPM8 I Only available in Oak
• Solidwood • SM8not finishedon 1/4”bottomor 3/4”
backside • SPM8not finishedon 23/32”backside • Offeredinindividual8’lengths
I C
I M
v O
¾˝
Radius ¼˝
¼˝ SM8
SPM8
/˝
Radius /˝
¼˝
Decorative Enhancem
ents
K7Moldings
Wide Scribe Molding
WSM8 • Solidwood • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v ORadius /˝
¼˝
1 ½˝
Shoe Molding
SHO8 • Solidwood • Usedasinsidecornermoldingortrim
betweentoekickandfloor • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v ORadius ½˝
/˝
½˝
Contemporary Base Board
CBB8 • Solidwood • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O¾˝
Radius ½˝
4 /˝
¾˝
Traditional Base Board
TBB8 • Solidwood • Backsnot finished • Offeredinindividual8’lengths
v C
v M
v O¾˝
Radius /˝
4 /˝
¾˝
Single Bead Pilaster
SBP8 • Solidwood • Finishedonallsides • Usedasdecorativetrimpanelvertically
betweenBase,Vanity,TallandWallcabinets.Can also be used as a decorative valance
• Offeredinindividual8’lengths
v C
v M
v O
¾˝
4 ¼˝
Dec
orat
ive
Enha
ncem
ents
K8 Moldings
Triple Bead Pilaster
TBP8 • Solidwood • Finishedonallsides • Usedasdecorativetrimpanelvertically
betweenBase,Vanity,TallandWallcabinets.Can also be used as a decorative valance
• Offeredinindividual8’lengths
v C
v M
v O
4 ¼˝
¾˝¼˝
Dentil Molding
DM8 • Solidwood • Usedtodecorate/trimspacebetweendoors
andceilings/soffit.CanbecombinedwithClassicCrownMolding(CCM8)tocreateacorniceeffect
• Backsnot finished • Offeredinindividual8’lengths • Note:DentilMolding(DM8)shownusedwith
ClassicCrownMolding(CCM8)
v C
v M
v O
/˝
½˝
Galley Rail
GR8 • Solidwood • Spindlesareon3”centers • Finishedonallsurfaces • Usedtotrimtopofwallcabinetsfor
decorativeeffect • Offeredinindividual8’lengths
v C
v M
v O/˝
2 /˝1/˝
½˝ ¼˝
¾˝ /˝
1 /˝
Rope Molding
RM8 • Solidwood • Halfround • Righttwist • Backsnot finished • CanbecombinedwithClassicCrownMolding
(CCM8)andInsetLightRail(ILR8) • Offeredinindividual8’lengths
v C
v M
v O
¾˝
Tapestry Insert Molding
Finished
TIM8 Unfinished
TIM8 •UF
• Solidwood • Handcarveddetailsprovideacustomone-
of-a-kindlook • Graindirectionrunslengthwise • Designis1 13/16”wideandrepeats53times
in8’ • Flatontwosides • CanbecombinedwithClassicCrownMolding
(CCM8) • BrieandMeringuefinishesonlyavailablewith
glaze • Offeredinindividual8’lengths
v C
v M
v O
/˝1 /˝
/˝
½˝
Decorative Enhancem
ents
K9Moldings
Windmere Rope Molding
Finished
WRM8 Unfinished
WRM8 •UF
• Solidwood • Handcarveddetailsprovideacustomone-of-
a -kind look • Graindirectionrunslengthwise • Flatonthreesides • Righttwist • CanbecombinedwithClassicCrownMolding
(CCM8) • Offeredinindividual8’lengths
v C
v M
v O
/˝
/˝
Solid Wood Stock
SWS4
SWS6
SWS8
• 3/4”thicksolidwood • Graindirectionrunslengthwise • Canbeusedforvalance,filler,shelforother
matchingfinish,cut-to-sizeapplications • Finishedonbothsidesandbothlongedges • Offeredinindividual4’,6’or8’lengths
v C
v M
v O
6˝ 48˝ 72˝ 96˝¾˝
Dec
orat
ive
Enha
ncem
ents
K10 Molding Accents
Molding Accents Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
C - - - Cherry M - - - Maple O - - - Oak
ECB 3 12code width height
Estero Corbel
Finished
ECB312
ECB49 Unfinished
ECB312 •UF
ECB49 •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Includestworecessedmetalkeyholebrackets • Doesnot include screws
v C
v M
O9˝ 3˝
12˝
2 /̋
6˝ 4˝
9˝
Estero Foot
Finished
EFT Unfinished
EFT •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Matchestoespaceofheightofbase,tall,and
vanitycabinets,exceptUniversalCabinets
v C
v M
O
3˝ square2 ½˝ square
4 ½˝
1 ½˝ square
Estero Leg
Finished
ELB34 Unfinished
ELB34 •UF
• Solidwood • Verticalwoodgrain • Matchesheightofbasecabinets
v C
v M
O
3˝ square
5˝
34 ½˝
Decorative Enhancem
ents
K11Molding Accents
Tapestry Corbel
Finished
TCB312
TCB49 Unfinished
TCB312 •UF
TCB49 •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Includestworecessedmetalkeyholebrackets • Doesnot include screws
v C
v M
O9˝ 3˝
12˝
6˝ 4˝
9˝
Tapestry Foot
Finished
TFT Unfinished
TFT •UF
• Solidwood • Verticalwoodgrain • Matchestoespaceofheightofbase,tall,and
vanitycabinets,exceptUniversalCabinets
v C
v M
O
2 ½˝ square
4 ½˝
2 /˝ diameter
/˝ dia.
Tapestry Leg
Finished
TLB34 Unfinished
TLB34 •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Matchesheightofbasecabinets
v C
v M
O
3˝ square
5˝
34 ½˝
Dec
orat
ive
Enha
ncem
ents
K12 Molding Accents
Windmere Corbel
Finished
WCB312
WCB49 Unfinished
WCB312 •UF
WCB49 •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Includestworecessedmetalkeyholebrackets • Doesnot include screws
v C
v M
O
9˝ 3˝
12˝
6˝ 4˝
9˝
Windmere Foot
Finished
WDFT Unfinished
WDFT •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Matchestoespaceofheightofbase,tall,and
vanitycabinets,exceptUniversalCabinets
v C
v M
O
4 ½"
2 ½" diameter
Windmere Leg
Finished
WDLB34 Unfinished
WDLB34 •UF
• Solidwood • Handcarveddetailsprovideacustom,“oneof
akind”look • Verticalwoodgrain • Matchesheightofbasecabinets
v C
v M
O
3˝ square
5˝
34 ½˝
Tapered Leg
Finished
TPL
TPL34 Unfinished
TPL •UF
TPL34 •UF
• Solidwood • Verticalwoodgrain • Matchesheightofbasecabinets • Trimmed
v C
v M
v O
34 ½˝
3 ¾˝
2 ½˝
Top View
2 ½˝
Bottom View
1 /˝
Decorative Enhancem
ents
K13Molding Accents
Plain Square Posts
PSP6X6 •30
PSP6X6 •34
PSP6X6 •36
PSP6X6 •42
• Solidwood • Verticalwoodgrain • 1/8”thickradiuscorners • Not available unfinished • Miteredcornersprovidetheappearanceof
one piece solid wood • 3/4”thicksolidwoodsideswith4 1/2”square
hollow center
v C
v M
v O
6˝ square
30˝34 ½˝36˝42˝
Spindles
Finished
SP536
SP542 Unfinished
I SP536 •UF
I SP542 •UF
• Solidwood • Verticalwoodgrain • 1/8”thickradiuscorners • For34 1/2”tallapplications,orderaSP536
and field cut
I C
v M
I O
7˝
36˝42˝
6 ½˝
4 ¾˝ square
I Only available in Maple
Roman Spindles
Finished
RSP536
RSP542 Unfinished
I RSP536 •UF
I RSP542 •UF
• Solidwood • Verticalwoodgrain • For34 1/2”tallapplications,orderaRSP536
and field cut
I C
v M
I O
36˝42˝
6 /˝
6 /˝
4 ¾˝ square
I Only available in Maple
Dec
orat
ive
Enha
ncem
ents
K14 Decorative Hardware
Decorative Hardware
Construction Options and Modifications
HK123code
White Ceramic Knob
HK02 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Satin Nickel Rope Knob
HK107 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Solid Bright Brass Knob
HK108 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Brushed Satin Nickel Knob
HK109 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Decorative Enhancem
ents
K15Decorative Hardware
Black Nickel Knob
HK110 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Bright Chrome Knob
HK111 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Antique Iron Knob
HK119 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Satin Nickel Round Knob
HK120 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Satin Aluminum Knob
HK117 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Dec
orat
ive
Enha
ncem
ents
K16 Decorative Hardware
Copper-Pewter Knob
HK125 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Dusty Copper Flower Knob
HK127 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Antique Pewter Braided Knob
HK123 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Rusty Flower Knob
HK126 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Antique Pewter Flower Knob
HK128 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Decorative Enhancem
ents
K17Decorative Hardware
Brushed Satin Pewter French Tassel Round Knob
HK150 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Modern Satin Nickel Knob
HK137 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Satin Nickel Football Shaped Knob
HK138 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Black Ceramic Insert Round Knob
HK152 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Tumbled Dark Gunmetal Round Knob
HK155 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 233/64”(64mm)betweenholecenters
Dec
orat
ive
Enha
ncem
ents
K18 Decorative Hardware
Oil Rubbed Bronze Round Knob
HK157 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Satin Nickel Diminishing Knob
HK158 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 1 17/64”(32mm)betweencenterholes
1 /˝
Ochre Finished Ceramic Totem Knob
HK161 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Venetian Bronze Copper French Lace Knob
HK162 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews
Satin Nickel Suitcase Pull
HP103 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters • Note:ADAcompliant
3 /˝
Decorative Enhancem
ents
K19Decorative Hardware
Satin Aluminum Boat Cleat Transitional Pull
HP112 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Satin Nickel Rope Pull
HP106 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Antique Pewter Braided Pull
HP124 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 5 1/32”(128mm)betweenholecenters • Note:ADAcompliant
5 /˝
Satin Nickel Wire Cable Pull
HP131 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 5 1/32”(128mm)betweenholecenters
5 /˝
Satin Nickel Transitional Pull
HP118 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3”betweenholecenters
3˝
Dec
orat
ive
Enha
ncem
ents
K20 Decorative Hardware
Satin Nickel Canoe Pull
HP135 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Satin Nickel Fusilli Pull
HP139 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters • Note:ADAcompliant
3 /˝
White Fusilli Pull
HP140 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters • Note:ADAcompliant
3 /˝
Brushed Satin Pewter French Tassel Pull
HP151 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3”betweenholecenters
3˝
Black Ceramic Insert Pull
HP153 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3”betweenholecenters
3˝
Decorative Enhancem
ents
K21Decorative Hardware
Satin Nickel Wavy Pull
HP159 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 5 1/32”(128mm)betweenholecenters
5 /˝
Tumbled Dark Gunmetal Mission Style Ringed Pendant Pull
HP154 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Designedtobeinstalledvertically • Includesscrews • 233/64”(64mm)betweenholecenters
2 /˝
Chrome Traditional Pull
HP163 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Oil Rubbed Bronze Cup Pull
HP156 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • Sizebetweenholecenters:233/64”(64mm)
or3”(76.2mm) • Note:ADAcompliant
2 /˝ and 3˝
Ochre Finished Ceramic Totem Pull
HP160 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Dec
orat
ive
Enha
ncem
ents
K22 Decorative Hardware
Black Nickel Traditional Pull
HP166 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Bright Brass Traditional Pull
HP165 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Satin Nickel Traditional Pull
HP164 • Decorativehardwarecanbeaddedtoanydoor or drawer
• Includesscrews • 3 25/32”(96mm)betweenholecenters
3 /˝
Replacement Parts
L1
Replacement Parts
L1Hardware
Hardware Construction Options and Modifications
FADBKcode
Adjustable Door Buffer Kit
FADBK • Soft-closingtechnologyprovidessmoothandsilentclosureofdoor
• Onerequiredperdoor;PC,UandVLCcabinetsrequiretwo
• Mountinghardwareincluded • Onepercarton • Note:DonotusewithBCA24,BEC24,BWBT,
MC,VHB18,WCA12_,WEC_12cabinets.Not recommendedforusewithBCFSandWEZRcabinets
• Note:Requiresfieldinstallation
Partial overlay spacer and screws
Hardware Template Kit
HTK • Handydrilljigforuniversalhardwaredrilling • High-impactgreypolycarbonatetemplate
withhardenedsteeldrillbushings • Adjustableforusewithalldrawersanddoors • Onepercarton
Repl
acem
ent P
arts
L2
Repl
acem
ent P
arts
L2 Touch-Up
Touch-Up Construction Options and Modifications
QST •C58Mcode finish
Cabinet Care Kit
CCK • One8oz.squeezebottleofconcentratedwoodcleaner
• One8oz.squeezebottleofcabinet/furniturepolishandrestorer
• Two13”x12”cleaningandpolishingcloths • One17”x13”dustingcloth
Cabinet Care Kit
Polish Cleaner
Aerosol Can
Primer
ACPR •C55MBrieMaple
ACPR •C59MMeringueMaple Topcoat
ACTC •C55M BrieMaple
ACTC •C59M MeringueMaple
• 13oz.aerosolspraycan
Replacement Parts
L3
Replacement Parts
L3Touch-Up
Touch-Up Quart
Topcoat
QCTC ClearSealer,Natural Stain
QST •C53M AllspiceMaple
QST •C58M ChutneyMaple
QST •C63M PepperMaple
QST •C63O PepperOak
QST •C64M PoppySeedMaple
QST •C65C PumpernickelCherry
QST •C65M PumpernickelMaple
QST •C65O PumpernickelOak
QST •C66C StrudelCherry
QST •C66O StrudelOak
QST •C68M ToastedSesameMaple Paint
QP •C55M BrieMaple
QP •C59M MeringueMaple Glaze
QSTGL •EBZ EbonyGlaze
QSTGL •JVZ JavaGlaze
QSTGL •DSZ PumpkinGlaze
QSTGL •TNZ TuscanGlaze
• Matchingstain,paint,glazeandclearsealer/topcoat
• Availableinquartsonly
Quart
Touch-Up Kit
Stain
TUK •C53M AllspiceMaple
TUK •C58M ChutneyMaple
TUK •C61M NaturalMaple
TUK •C61O NaturalOak
TUK •C63M PepperMaple
TUK •C63O PepperOak
TUK •C64M PoppySeedMaple
TUK •C65C PumpernickelCherry
TUK •C65M PumpernickelMaple
TUK •C65O PumpernickelOak
TUK •C66C StrudelCherry
TUK •C66O StrudelOak
TUK •C68M ToastedSesameMaple Paint
TUK •C55M BrieMaple
TUK •C59M MeringueMaple Stain w/Glaze
TUK •C54M Allspicew/EbonyGlazeMaple
TUK •C62M Naturalw/JavaGlazeMaple
TUK •C67C Strudelw/JavaGlazeCherry
TUK •C69M ToastedSesamew/JavaGlazeMaple Paint w/Glaze
TUK •C56M Briew/PumpkinGlazeMaple
TUK •C57M Briew/TuscanGlazeMaple
TUK •C60M Meringuew/TuscanGlazeMaple
• Availableinallfinishes • Usedforfinaltouchupanddetailing • KitincludesTouchUpPen(TP),FillStick(FS),
abottleoftouchuptopcoatandaplasticstoragecase
Repl
acem
ent P
arts
L4
Repl
acem
ent P
arts
L4 Touch-Up
Touch-Up Pen
Stain
TP •C53M AllspiceMaple
TP •C58M ChutneyMaple
TP •C61M NaturalMaple
TP •C61O NaturalOak
TP •C63M PepperMaple
TP •C63O PepperOak
TP •C64M PoppySeedMaple
TP •C65C PumpernickelCherry
TP •C65M PumpernickelMaple
TP •C65O PumpernickelOak
TP •C66C StrudelCherry
TP •C66O StrudelOak
TP •C68M ToastedSesameMaple Paint
TP •C55M BrieMaple
TP •C59M MeringueMaple Stain w/Glaze
TP •C54M Allspicew/EbonyGlazeMaple
TP •C62M Naturalw/JavaGlazeMaple
TP •C67C Strudelw/JavaGlazeCherry
TP •C69M ToastedSesamew/JavaGlazeMaple Paint w/Glaze
TP •C56M Briew/PumpkinGlazeMaple
TP •C57M Briew/TuscanGlazeMaple
TP •C60M Meringuew/TuscanGlazeMaple
• Felttipmarkerwithmatchingstain • Availableinallfinishes
Fill Stick
Stain
FS •C53M AllspiceMaple
FS •C58M ChutneyMaple
FS •C61M NaturalMaple
FS •C61O NaturalOak
FS •C63M PepperMaple
FS •C63O PepperOak
FS •C64M PoppySeedMaple
FS •C65C PumpernickelCherry
FS •C65M PumpernickelMaple
FS •C65O PumpernickelOak
FS •C66C StrudelCherry
FS •C66O StrudelOak
FS •C68M ToastedSesameMaple Paint
FS •C55M BrieMaple
FS •C59M MeringueMaple Stain w/Glaze
FS •C54M Allspicew/EbonyGlazeMaple
FS •C62M Naturalw/JavaGlazeMaple
FS •C67C Strudelw/JavaGlazeCherry
FS •C69M ToastedSesamew/JavaGlaze Paint w/Glaze
FS •C56M Briew/PumpkinGlazeMaple
FS •C57M Briew/TuscanGlazeMaple
FS •C60M Meringuew/TuscanGlazeMaple
• Matchingputtycrayon • Availableinallfinishes
Replacement Parts
L5
Replacement Parts
L5Touch-Up
Edge Banding
EDB • Usedforfinishingedgesofpanels • Availableinallfinishes • Rollis25’long, 15/16”wideand14milthick • Melamineedgebandingwithpre-appliedhot
meltadhesive • ForNaturalw/JavaGlaze,useMapleNatural • ForAllspicew/EbonyGlaze,useMaple
Allspice
Repl
acem
ent P
arts
L6 Notes
Notes
Replacement Parts
Door & Drawer Fronts - How to use L7
Thisguideallowsyoutochoosefromacompletelineofdoorsanddrawerfrontsforreplacementaswellasspecialapplicationssuchasappliancefronts,whirlpoolskirts,wainscoting,etc.
Thissectionisdividedintothreeparts
I. Part Index Thispartlistsallcabinetsalphabeticallybytheir nomenclatureandtellsyouthecorresponding replacementdoorsanddrawerfrontsusedonthat cabinet.Findyourdoorstyleintheindexonthe followingpagestodeterminetheconfigurationtouse.
II. Sizes Thispartlistsallreplacementdoorsanddrawerfronts bytheirnomenclature.Theyaresortedbytheir nominalheight(lasttwonumbersofthe nomenclature)fromlargesttosmallest.
Tochoosedoorsanddrawerfrontsforreplacement,usethePartIndexsectiontolookupthecabinetanddeter-minewhichdoorsanddrawerfrontsareneeded.Thenlookupthedoor(s)anddrawerfront(s)inthePriceListcatalogunderthepricecolumnnumberappropriatetoyourdoorstyle.
Tochoosedoorsanddrawerfrontsforspecialdecorativeapplications,usetheSizessectionandlookintheap-propriateoverlaycolumntodeterminewhichdoorsanddrawerfrontsareneeded.Thenlookupthedoor(s)anddrawerfront(s)inthePriceListcatalogunderthepricecolumnnumberappropriatetoyourdoorstyle.
III. Drawer Boxes Thispartlistsallreplacementdrawerboxesbytheir nomenclature.Theyaresortedbytheirnominal height(lasttwonumbersofthenomenclature)from smallesttolargest.
How to Use This Section
Replacement Door & Drawer Front Information
Replacementdoorsmaybeorderedforwallorbaseapplication.Whenordering,specifydoorstyle,hingingand•W(wall)or•B(base).
Example: You need a replacement door for a wall 1830, hinged left.
Order: RD1830L•W
Replacementdoorsarepreparedforhinges.Replacementdoorsanddrawerfrontsareshippedwithpliablebumpersattached.
ReplacementdoorswithBistroGlass,Sa-vannahGlass,orTraditionalMullionGlassinstalledareavailableonselectcabinets.Toorder,determinethereplacementdoor(s)requiredandadddesiredglassinsert.
Example: You need a Bistro Glass insert for a wall 1830, hinged left.
Order: RD1830L•W–1BIS1 Pricing: RD1830L•W + 1 Bistro Insert for 12”-30”high = Total for replacement door with insert installed
Example: You need a Traditional Mullion Glass insert for a wall 1836, hinged left.
Order: RD1836L•W–1MD2 Pricing: RD1836L•W + 1 Traditional Mullion Insert for 36”-42” high = Total for mullion door with insert installed
Replacementdoorsanddrawerfrontsarecodedforeasyrefer-ence.Theprefixcodesindicatedoorordrawerandusage.Thefirsttwodigitsindicatenominalwidthandthesecondtwodigitsindicatenominalheight.
RD 18 30
Prefix Nominal Nominal code Width Height
Prefixcodesareasfollows: RD replacementdoor RDB replacementdoorbutt RDBBC replacementdoorbaseblindcorner RDBCA replacementdoorblindcornerangle RDEZR* replacementdooreasyreach (twodoorshingedtogether) RDBPP replacementdoorbasepotsandpans RDBWBT replacementdoorbasewastebaskettopmount RDDFD replacementdoordeskfiledrawer RDWBC replacementdoorwallblindcorner RDW replacementdrawerfront RDWSFA replacementdrawersinkfrontangle RDWVSB replacementdrawervanitysinkbase
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexL8
B12 1 RD1224 1 RD1224 1 RDW1206 1 RDW1206B12•FH 1 RD1230 1 RD1230B15 1 RD1524 1 RD1524 1 RDW1506 1 RDW1506B15•FH 1 RD1530 1 RD1530B18 1 RD1824 1 RD1824 1 RDW1806 1 RDW1806B18•FH 1 RD1830 1 RD1830B21 1 RD2124 1 RD2124 1 RDW2106 1 RDW2106B21•FH 1 RD2130 1 RD2130B24 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406B24•FH 1 RD2430 1 RD2430B24BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406B24BUTT•FH 2 RDB2430 2 RDB2430B27(Butt) 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706B27(Butt)•FH 2 RD2730 2 RD2730B27•FH 2 RD2730 2 RD2730B30BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006B30BUTT•FH 2 RD3030 2 RD3030B33BUTT 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306B33BUTT•FH 2 RDB3330 2 RDB3330B36BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606B36BUTT•FH 2 RD3630 2 RD3630B39 2 RD3924 2 RD3924 1 RDW3906 1 RDW3906B39•FH 2 RD3930 2 RD3930B42 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106B42•FH 2 RD2130 2 RD2130B45 2 RD4524 2 RD4524 2 RDW4506 2 RDW4506B45•FH 2 RD4530 2 RD4530B48 2 RD2424 2 RD2424 2 RDW2406 2 RDW2406B48•FH 2 RD2430 2 RD2430B54 3 RD1824 3 RD1824 3 RDW1806 3 RDW1806B9•FH 1 RD0930 1 RD0930BBC39 1 RDBBC3624 1 RDBBC3624 1 RDWBBC3606 1 RDWBBC3606BBC42 1 RDBBC3924 1 RDBBC3924 1 RDWBBC3906 1 RDWBBC3906BBC45 1 RD3324 1 RD3324 1 RDWBBC4206 1 RDWBBC4206BBC48 1 RD3924 1 RD3924 1 RDWBBC4506 1 RDWBBC4506BBC51 1 RD4524 1 RD4524 1 RDWBBC4806 1 RDW4506BCA24BUTT 2 RDBCA2430 2 RDBCA2430BCD24•4D 1 RD1224 1 RD1224 2 RDW1206 2 RDW1206 1 RDW1211 1 RDW1211 1 RDW2406 1 RDW2406BCD30•4D 1 RD1524 1 RD1524 2 RDW1506 2 RDW1506 1 RDW1511 1 RDW1511 1 RDW3006 1 RDW3006BCD36•4D 1 RD1824 1 RD1824 2 RDW1806 2 RDW1806 1 RDW1811 1 RDW1811 1 RDW3606 1 RDW3606BCFS36 1 RDEZR36 1 RDEZR36BD12 3 RDW1206 3 RDW1206 1 RDW1211 1 RDW1211BD12•3 1 RDW1206 1 RDW1206 2 RDW1215 2 RDW1215BD15 3 RDW1506 3 RDW1506 1 RDW1511 1 RDW1511
BD15•3 1 RDW1506 1 RDW1506 2 RDW1515 2 RDW1515BD18 3 RDW1806 3 RDW1806 1 RDW1811 1 RDW1811BD18•3 1 RDW1806 1 RDW1806 2 RDW1815 2 RDW1815BD21 3 RDW2106 3 RDW2106 1 RDW2111 1 RDW2111BD21•3 1 RDW2106 1 RDW2106 2 RDW2115 2 RDW2115BD24 3 RDW2406 3 RDW2406 1 RDW2411 1 RDW2411BD24•3 1 RDW2406 1 RDW2406 2 RDW2415 2 RDW2415BD27 3 RDW2706 3 RDW2706 1 RDW2711 1 RDW2711BD27•3 1 RDW2706 1 RDW2706 2 RDW2715 2 RDW2715BD30•3 1 RDW3006 1 RDW3006 2 RDW3015 2 RDW3015BD33•3 1 RDW3306 1 RDW3306 2 RDW3315 2 RDW3315BD36•3 1 RDW3606 1 RDW3606 2 RDW3615 2 RDW3615BEA12 1 RD1530 1 RD3330BEC24 2 RD1830 2 RD1830BMC2434 1 RDW2415 1 RDW2415BMC2734 1 RDW2715 1 RDW2715BMC3034 1 RDW3015 1 RDW3015BPP9 1 RDBPP0930 1 RDBPP0930BPPS27•2 2 RDW2716 2 RDW2716BPPS30•2 2 RDW3016 2 RDW3016BPPS33•2 2 RDW3316 2 RDW3316BPPS36•2 2 RDW3616 2 RDW3616BWBT15 1 RDBWBT1524 1 RDBWBT1524 1 RDW1506 1 RDW1506BWBT18•2 1 RDBWBT1824 1 RDBWBT1824 1 RDW1806 1 RDW1806DDO15 1 RD1518 1 RD1518 1 RDW1506 1 RDW1506DDO18 1 RD1818 1 RD1818 1 RDW1806 1 RDW1806DDO21 1 RD2118 1 RD2118 1 RDW2106 1 RDW2106DDO24 1 RD2418 1 RD2418 1 RDW2406 1 RDW2406DDR12 1 RDW1206 1 RDW1206 2 RDW1213 2 RDW1213DDR15 1 RDW1506 1 RDW1506 2 RDW1513 2 RDW1513DDR18 1 RDW1806 1 RDW1806 2 RDW1813 2 RDW1813DDR21 1 RDW2106 1 RDW2106 2 RDW2113 2 RDW2113DDR24 1 RDW2406 1 RDW2406 2 RDW2413 2 RDW2413DFD15 1 RDDFD15 1 RDDFD15 1 RDW1506 1 RDW1506DFD18 1 RDDFD18 1 RDDFD18 1 RDW1806 1 RDW1806DFD21 1 RDDFD21 1 RDDFD21 1 RDW2106 1 RDW2106DFD24 1 RDDFD24 1 RDDFD24 1 RDW2406 1 RDW2406DKD24 1 RDW2404 1 RDW2404DKD30 1 RDW3004 1 RDW3004DKD36 1 RDW3604 1 RDW3604DKDT24 1 RDW1804 1 RDW1804DKDT30 1 RDW2404 1 RDW2404DKDT36 1 RDW3004 1 RDW3004DOS18 1 RD1818 1 RD1818DOS24BUTT 2 RDB2418 2 RDB2418DSB30 2 RD1521 2 RD1521DSB33 2 RD3321 2 RD3321DSB36 2 RD1821 2 RD1821
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L9
LS33 1 RDEZR33 1 RDEZR33LS36 1 RDEZR36 1 RDEZR36LSA36 1 RD1530 1 RD3330OC27_90S 4 RD2724 4 RD2724OC27_93S 2 RD2724 2 RD2724 2 RD2727 2 RD2727OC2784(Butt)S 2 RD2718 2 RD2718 2 RD2724 2 RD2724OC2784(Butt)U 2 RD2718 2 RD2718 1 RDW2706 1 RDW2706OC2790(Butt)U 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706OC2793(Butt)U 2 RD2727 2 RD2727 1 RDW2706 1 RDW2706OC2796(Butt)S 2 RD2724 2 RD2724 2 RD2730 2 RD2730OC2796(Butt)U 2 RD2730 2 RD2730 1 RDW2706 1 RDW2706OC30_84BUTTS 2 RD3018 2 RD3018 2 RD3024 2 RD3024OC30_84BUTTU 2 RD3018 2 RD3018 1 RDW3006 1 RDW3006OC30_90BUTTS 4 RD3024 4 RD3024OC30_90BUTTU 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006OC30_93BUTTS 2 RD3024 2 RD3024 2 RD3027 2 RD3027OC30_93BUTTU 2 RD3027 2 RD3027 1 RDW3006 1 RDW3006OC30_96BUTTS 2 RD3024 2 RD3024 2 RD3030 2 RD3030OC30_96BUTTU 2 RD3030 2 RD3030 1 RDW3006 1 RDW3006OC33_84BUTTS 2 RDB3318 2 RDB3318 2 RDB3324 2 RDB3324OC33_84BUTTU 2 RDB3318 2 RDB3318 1 RDW3306 1 RDW3306OC33_90BUTTS 4 RDB3324 4 RDB3324OC33_90BUTTU 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306OC33_93BUTTS 2 RDB3324 2 RDB3324 2 RDB3327 2 RDB3327OC33_93BUTTU 2 RDB3327 2 RDB3327 1 RDW3306 1 RDW3306OC33_96BUTTS 2 RDB3324 2 RDB3324 2 RDB3330 2 RDB3330OC33_96BUTTU 2 RDB3330 2 RDB3330 1 RDW3306 1 RDW3306ODK27 1 RDW2706 1 RDW2706ODK30 1 RDW3006 1 RDW3006ODK33 1 RDW3306 1 RDW3306PB18 2 RD1824 2 RD1824 2 RDW1806 2 RDW1806PB21 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106PB24 2 RD2424 2 RD2424 2 RDW2406 2 RDW2406PB24BUTT 4 RDB2424 4 RDB2424 2 RDW2406 2 RDW2406PB27(Butt) 4 RD2724 4 RD2724 2 RDW2706 2 RDW2706PB30BUTT 4 RD3024 4 RD3024 2 RDW3006 2 RDW3006PB36BUTT 4 RD3624 4 RD3624 2 RDW3606 2 RDW3606PBBC27 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406PC36_84BUTT 2 RD3618 2 RD3618 2 RD3663 2 RD3663PC36_90BUTT 2 RD3624 2 RD3624 2 RD3663 2 RD3663PC36_93BUTT 2 RD3627 2 RD3627 2 RD3663 2 RD3663PC36_96BUTT 2 RD3630 2 RD3630 2 RD3663 2 RD3663PW1824 2 RD1824 2 RD1824
PW1830 2 RD1830 2 RD1830PW2124 2 RD2124 2 RD2124PW2130 2 RD2130 2 RD2130PW2418 2 RD2418 2 RD2418PW2418BUTT 4 RDB2418 4 RDB2418PW2424 2 RD2424 2 RD2424PW2424BUTT 4 RDB2424 4 RDB2424PW2430 2 RD2430 2 RD2430PW2430BUTT 4 RDB2430 4 RDB2430PW3018BUTT 4 RD3018 4 RD3018PW3024BUTT 4 RD3024 4 RD3024PW3030BUTT 4 RD3030 4 RD3030PW3618BUTT 4 RD3618 4 RD3618PW3624BUTT 4 RD3624 4 RD3624PW3630BUTT 4 RD3630 4 RD3630PWA2430LRorL 1 RD1530 1 RD3330 1 RD4530 1 RD4530PWA2430RRorL 1 RD4530 1 RD4530 1 RD1530 1 RD1530PWBC2730 2 RD1230 2 RD1230 1 RDWBC2430 1 RDWBC2430RSF30BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006RSF33BUTT 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306RSF36BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606RSF42 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106SB12•W 1 RD1224 1 RD1224 1 RDW1206 1 RDW1206SB15•W 1 RD1524 1 RD1524 1 RDW1506 1 RDW1506SB18•W 1 RD1824 1 RD1824 1 RDW1806 1 RDW1806SB21•W 1 RD2124 1 RD2124 1 RDW2106 1 RDW2106SB24•W 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406SB24•W•FH 1 RD2430 1 RD2430SB24BUTT•W 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406SB24BUTT•W•FH 2 RDB2430 2 RDB2430SB27(Butt)•W 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706SB27(Butt)•W•FH 2 RD2730 2 RD2730SB27•W 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706SB30BUTT•CG 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006SB30BUTT•CG•UT 2 RD3024 2 RD3024 1 RDW3006.UT 1 RDW3006.UTSB30BUTT•W 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006SB30BUTT•W•FH 2 RD3030 2 RD3030SB33BUTT•CG 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306SB33BUTT•CG•UT 2 RDB3324 2 RDB3324 1 RDW3306.UT 1 RDW3306.UTSB33BUTT•W 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306SB33BUTT•W•FH 2 RDB3330 2 RDB3330SB33BUTT•W•UT 2 RDB3324 2 RDB3324 1 RDW3306.UT 1 RDW3306.UTSB36BUTT•CG 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606SB36BUTT•CG•UT 2 RD3624 2 RD3624 1 RDW3606.UT 1 RDW3606.UTSB36BUTT•W 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606SB36BUTT•W•FH 2 RD3630 2 RD3630SB36BUTT•W•UT 2 RD3624 2 RD3624 1 RDW3606.UT 1 RDW3606.UTSB39•W 2 RD3924 2 RD3924 1 RDW3906 1 RDW3906
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L9
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexL10
SB39•W•FH 2 RD3930 2 RD3930SB42•W 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106SB42•W•FH 2 RD2130 2 RD2130SB48•W 2 RD2424 2 RD2424 2 RDW2406 2 RDW2406SB48•W•FH 2 RD2430 2 RD2430SBA36 1 RD3324 1 RD3324 1 RDWBBC4206 1 RDWBBC4206SBA42 1 RDSFA4224 1 RDSFA4224 1 RDWSFA4206 1 RDWSFA4206SF24 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406SF24BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406SF24BUTT•FH 2 RDB2430 2 RDB2430SF30BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006SF30BUTT•FH 2 RD3030 2 RD3030SF36BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606SF36BUTT•FH 2 RD3630 2 RD3630SFA36 1 RD1524 1 RD3324 1 RDW1506 1 RDW1706SFA36•FH 1 RD3330 1 RD3330SFA39 1 RDSFA3924 1 RDSFA3924 1 RDWSFA3906 1 RDWSFA3906SFA42 1 RDSFA4224 1 RDSFA4224 1 RDWSFA4206 1 RDWSFA4206U15_84 1 RD1518 1 RD1518 1 RD1563 1 RD1563U15_90 1 RD1524 1 RD1524 1 RD1563 1 RD1563U15_93 1 RD1527 1 RD1527 1 RD1563 1 RD1563U15_96 1 RD1530 1 RD1530 1 RD1563 1 RD1563U18_84 1 RD1818 1 RD1818 1 RD1863 1 RD1863U18_90 1 RD1824 1 RD1824 1 RD1863 1 RD1863U18_93 1 RD1827 1 RD1827 1 RD1863 1 RD1863U18_96 1 RD1830 1 RD1830 1 RD1863 1 RD1863U24_84 1 RD2418 1 RD2418 1 RD2463 1 RD2463U24_84BUTT 2 RDB2463 2 RDB2418 2 RDB2418 2 RDB2463U24_90 1 RD2424 1 RD2424 1 RD2463 1 RD2463U24_90BUTT 2 RDB2424 2 RDB2424 2 RDB2463 2 RDB2463U24_93 1 RD2427 1 RD2427 1 RD2463 1 RD2463U24_93BUTT 2 RDB2427 2 RDB2427 2 RDB2463 2 RDB2463U24_96 1 RD2430 1 RD2430 1 RD2463 1 RD2463U24_96BUTT 2 RDB2430 2 RDB2430 2 RDB2463 2 RDB2463U30_84BUTT 2 RD3018 2 RD3018 2 RD3063 2 RD3063U30_90BUTT 2 RD3024 2 RD3024 2 RD3063 2 RD3063U30_93BUTT 2 RD3027 2 RD3027 2 RD3063 2 RD3063U30_96BUTT 2 RD3030 2 RD3030 2 RD3063 2 RD3063U36_84BUTT 2 RD3618 2 RD3618 2 RD3663 2 RD3663U36_90BUTT 2 RD3624 2 RD3624 2 RD3663 2 RD3663U36_93BUTT 2 RD3627 2 RD3627 2 RD3663 2 RD3663
U36_96BUTT 2 RD3630 2 RD3630 2 RD3663 2 RD3663UB12 1 RD1221 1 RD1221 1 RDW1206 1 RDW1206UB12•FH 1 RD1227 1 RD1227UB15 1 RD1521 1 RD1521 1 RDW1506 1 RDW1506UB15•FH 1 RD1527 1 RD1527UB18 1 RD1821 1 RD1821 1 RDW1806 1 RDW1806UB18•FH 1 RD1827 1 RD1827UB21 1 RD2121 1 RD2121 1 RDW2106 1 RDW2106UB24 1 RD2421 1 RD2421 1 RDW2406 1 RDW2406UB24•FH 1 RD2427 1 RD2427UB24BUTT 2 RDB2421 2 RDB2421 1 RDW2406 1 RDW2406UB24BUTT•FH 2 RDB2427 2 RDB2427UB27(Butt) 2 RD2721 2 RD2721 1 RDW2706 1 RDW2706UB27(Butt)•FH 2 RD2727 2 RD2727UB30BUTT 2 RD3021 2 RD3021 1 RDW3006 1 RDW3006UB30BUTT•FH 2 RD3027 2 RD3027UB33BUTT 2 RDB3321 2 RDB3321 1 RDW3306 1 RDW3306UB33BUTT•FH 2 RDB3327 2 RDB3327UB36BUTT 2 RD3621 2 RD3621 1 RDW3606 1 RDW3606UB36BUTT•FH 2 RD3627 2 RD3627UB39•FH 2 RD3927 2 RD3927UB42 2 RD2121 2 RD2121 2 RDW2106 2 RDW2106UB42•FH 2 RD2127 2 RD2127UB45•FH 2 RD4527 2 RD4527UB48•FH 2 RD2427 2 RD2427UB9•FH 1 RD0927 1 RD0927UBD12•3 1 RDW1206 1 RDW1206 2 RDW1211 2 RDW1211UBD15•3 1 RDW1506 1 RDW1506 2 RDW1511 2 RDW1511UBD18•3 1 RDW1806 1 RDW1806 2 RDW1811 2 RDW1811UBD21•3 1 RDW2106 1 RDW2106 2 RDW2111 2 RDW2111UBD24•3 1 RDW2406 1 RDW2406 2 RDW2412 2 RDW2412UBSF36BUTT•FH 2 RD3627 2 RD3627UBT24BUTT 2 RDB2421 2 RDB2421 1 RDW2406.UBT 1 RDW2406.UBTULS36 1 RDEZR3627 1 RDEZR3627URSF30BUTT 2 RD3024 2 RD3024URSF33BUTT 2 RDB3324 2 RDB3324URSF36BUTT 2 RD3624 2 RD3624URSF42 2 RD2124 2 RD2124USFCK30BUTT•FH 2 RD3027 2 RD3027USFCK33BUTT•FH 2 RDB3327 2 RDB3327USFCK36BUTT•FH 2 RD3627 2 RD3627USFCK42•FH 2 RD2127 2 RD2127VB12_31 1 RD1221 1 RD1221 1 RDW1206 1 RDW1206VB12_34 1 RD1224 1 RD1224 1 RDW1206 1 RDW1206VB15_31 1 RD1521 1 RD1521 1 RDW1506 1 RDW1506VB15_34 1 RD1524 1 RD1524 1 RDW1506 1 RDW1506VB18_31 1 RD1821 1 RD1821 1 RDW1806 1 RDW1806VB18_31•FH 1 RD1827 1 RD1827VB18_34 1 RD1824 1 RD1824 1 RDW1806 1 RDW1806VB18_34•FH 1 RD1830 1 RD1830
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L11
VB21_31 1 RD2121 1 RD2121 1 RDW2106 1 RDW2106VB21_31•FH 1 RD2127 1 RD2127VB21_34 1 RD2124 1 RD2124 1 RDW2106 1 RDW2106VB21_34•FH 1 RD2130 1 RD2130VB24_31 1 RD2421 1 RD2421 1 RDW2406 1 RDW2406VB24_31•FH 1 RD2427 1 RD2427VB24_31BUTT 2 RDB2421 2 RDB2421 1 RDW2406 1 RDW2406VB24_31BUTT•FH 2 RDB2427 2 RDB2427VB24_34 1 RD2424 1 RD2424 1 RDW2406 1 RDW2406VB24_34•FH 1 RD2430 1 RD2430VB24_34BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406VB24_34BUTT•FH 2 RDB2430 2 RDB2430VB27_31•FH 2 RD2727 2 RD2727VB27_34•FH 2 RD2730 2 RD2730VB30_31BUTT•FH 2 RD3027 2 RD3027VB30_34BUTT•FH 2 RD3030 2 RD3030VB33_31BUTT•FH 2 RDB3327 2 RDB3327VB33_34BUTT•FH 2 RDB3330 2 RDB3330VB36_31BUTT•FH 2 RD3627 2 RD3627VB36_34BUTT•FH 2 RD3630 2 RD3630VB39_31•FH 2 RD3927 2 RD3927VB39_34•FH 2 RD3930 2 RD3930VB42_31•FH 2 RD2127 2 RD2127VB42_34•FH 2 RD2130 2 RD2130VB48_31•FH 2 RD1527 2 RD1527 1 RD1827 1 RD1827VB48_34•FH 2 RD1530 2 RD1530 1 RD1830 1 RD1830VB54_31•FH 3 RD1827 3 RD1827VB54_34•FH 3 RD1830 3 RD1830VB60_31•FH 2 RD1427 2 RD1427 2 RD1527 2 RD1527VB60_34•FH 2 RD1430 2 RD1430 2 RD1530 2 RD1530VBD12_31•3 1 RDW1206 1 RDW1206 2 RDW1211 2 RDW1211VBD12_34•3 1 RDW1206 1 RDW1206 2 RDW1215 2 RDW1215VBD12_34•4 3 RDW1206 3 RDW1206 1 RDW1211 1 RDW1211VBD15_31•3 1 RDW1506 1 RDW1506 2 RDW1511 2 RDW1511VBD15_34•3 1 RDW1506 1 RDW1506 2 RDW1515 2 RDW1515VBD15_34•4 3 RDW1506 3 RDW1506 1 RDW1511 1 RDW1511VBD18_31•3 2 RDW1815 2 RDW1815 1 RDW1806 1 RDW1806 2 RDW1811 2 RDW1811VBD18_34•4 3 RDW1806 3 RDW1806 1 RDW1811 1 RDW1811VBD21_31•3 1 RDW2106 1 RDW2106 2 RDW2111 2 RDW2111VBD21_34•3 1 RDW2106 1 RDW2106 2 RDW2115 2 RDW2115VBD21_34•4 3 RDW2106 3 RDW2106 1 RDW2111 1 RDW2111VBD24_31•3 1 RDW2406 1 RDW2406 2 RDW2411 2 RDW2411VBD24_34•3 1 RDW2406 1 RDW2406 2 RDW2415 2 RDW2415VBD24_34•4 3 RDW2406 3 RDW2406 1 RDW2414 1 RDW2414VCD24_31DL2 1 RD1221 1 RD1221 2 RDW1211 2 RDW1211 1 RDW2406 1 RDW2406VCD24_31DR2 1 RD1221 1 RD1221 2 RDW1211 2 RDW1211 1 RDW2406 1 RDW2406
VCD24_34DL3 1 RD1224 1 RD1224 2 RDW1206 2 RDW1206 1 RDW1211 1 RDW1211 1 RDW2406 1 RDW2406VCD24_34DR3 1 RD1224 1 RD1224 2 RDW1206 2 RDW1206 1 RDW1211 1 RDW1211 1 RDW2406 1 RDW2406VCD30_31DL2 1 RD1521 1 RD1521 2 RDW1511 2 RDW1511 1 RDW3006 1 RDW3006VCD30_31DR2 1 RD1521 1 RD1521 2 RDW1511 2 RDW1511 1 RDW3006 1 RDW3006VCD30_34DL3 1 RD1524 1 RD1524 2 RDW1506 2 RDW1506 1 RDW1511 1 RDW1511 1 RDW3006 1 RDW3006VCD30_34DR3 1 RD1524 1 RD1524 2 RDW1506 2 RDW1506 1 RDW1511 1 RDW1511 1 RDW3006 1 RDW3006VCD36_31DL2 1 RD1821 1 RD1821 2 RDW1811 2 RDW1811 1 RDW3606 1 RDW3606VCD36_31DR2 1 RD1821 1 RD1821 2 RDW1811 2 RDW1811 1 RDW3606 1 RDW3606VCD36_34DL3 1 RD1824 1 RD1824 2 RDW1806 2 RDW1806 1 RDW1811 1 RDW1811 1 RDW3606 1 RDW3606VCD36_34DR3 1 RD1824 1 RD1824 2 RDW1806 2 RDW1806 1 RDW1811 1 RDW1811 1 RDW3606 1 RDW3606VCD42_31•6 1 RD1821 1 RD1821 2 RDW1206 2 RDW1206 4 RDW1211 4 RDW1211 1 RDW1806 1 RDW1806VCD42_34•8 1 RD1824 1 RD1824 6 RDW1206 6 RDW1206 2 RDW1211 2 RDW1211 1 RDW1806 1 RDW1806VCD48_31•6 1 RD1821 1 RD1821 2 RDW1506 2 RDW1506 4 RDW1511 4 RDW1511 1 RDW1806 1 RDW1806VCD48_34•8 1 RD1824 1 RD1824 6 RDW1506 6 RDW1506 2 RDW1511 2 RDW1511 1 RDW1806 1 RDW1806VCD60_31•6 2 RD1421 2 RD1421 2 RDW1506 2 RDW1506 4 RDW1511 4 RDW1511 1 RDWVSB6006 1 RDWVSB6006VCD60_34•8 2 RD1424 2 RD1424 6 RDW1506 6 RDW1506 2 RDW1511 2 RDW1511 1 RDWVSB6006 1 RDWVSB6006VHB18_31 1 RDVHB1827 1 RDVHB1827VLC15_84 1 RD1518 1 RD1518 1 RD1563 1 RD1563VLC15_90 1 RD1524 1 RD1524 1 RD1563 1 RD1563VLC15_96 1 RD1530 1 RD1530 1 RD1563 1 RD1563VLC18_48 1 RD1848 1 RD1848VLC18_84 1 RD1818 1 RD1818 1 RD1863 1 RD1863VLC18_90 1 RD1824 1 RD1824 1 RD1863 1 RD1863VLC18_96 1 RD1830 1 RD1830 1 RD1863 1 RD1863VLC24_84 1 RD2418 1 RD2418 1 RD2463 1 RD2463VLC24_84BUTT 2 RDB2418 2 RDB2418 2 RDB2463 2 RDB2463
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Repl
acem
ent P
arts
Door & Drawer Fronts - Part IndexL12
VLC24_90 1 RD2424 1 RD2424 1 RD2463 1 RD2463VLC24_90BUTT 2 RDB2424 2 RDB2424 2 RDB2463 2 RDB2463VLC24_96 1 RD2430 1 RD2430 1 RD2463 1 RD2463VLC24_96BUTT 2 RDB2430 2 RDB2430 2 RDB2463 2 RDB2463VSB24_31BUTT 2 RDB2421 2 RDB2421 1 RDW2406 1 RDW2406VSB24_34BUTT 2 RDB2424 2 RDB2424 1 RDW2406 1 RDW2406VSB27_31 2 RD2721 2 RD2721 1 RDW2706 1 RDW2706VSB27_34 2 RD2724 2 RD2724 1 RDW2706 1 RDW2706VSB30_31BUTT 2 RD3021 2 RD3021 1 RDW3006 1 RDW3006VSB30_34BUTT 2 RD3024 2 RD3024 1 RDW3006 1 RDW3006VSB33_31BUTT 2 RDB3321 2 RDB3321 1 RDW3306 1 RDW3306VSB33_34BUTT 2 RDB3324 2 RDB3324 1 RDW3306 1 RDW3306VSB36_31•2 2 RD1821 2 RD1821 3 RDW1206 3 RDW1206VSB36_31BUTT 2 RD3621 2 RD3621 1 RDW3606 1 RDW3606VSB36_34•2 2 RD1824 2 RD1824 3 RDW1206 3 RDW1206VSB36_34BUTT 2 RD3624 2 RD3624 1 RDW3606 1 RDW3606VSB39_31 2 RD3921 2 RD3921 1 RDW3906 1 RDW3906VSB39_34 2 RD3924 2 RD3924 1 RDW3906 1 RDW3906VSB42_31 2 RD2121 2 RD2121 2 RDW2106 2 RDW2106VSB42_31•2 2 RD1221 2 RD1221 1 RD1821 1 RD1821 2 RDW1206 2 RDW1206 1 RDW1806 1 RDW1806VSB42_34 2 RD2124 2 RD2124 2 RDW2106 2 RDW2106VSB42_34•2 2 RD1224 2 RD1224 1 RD1824 1 RD1824 2 RDW1206 2 RDW1206 1 RDW1806 1 RDW1806VSB48_31•2 2 RD1521 2 RD1521 1 RD1821 1 RD1821 2 RDW1506 2 RDW1506 1 RDW1806 1 RDW1806VSB48_34•2 2 RD1524 2 RD1524 1 RD1824 1 RD1824 2 RDW1506 2 RDW1506 1 RDW1806 1 RDW1806VSB54_31•2 3 RD1821 3 RD1821 3 RDW1806 3 RDW1806VSB54_31•3 2 RD2121 2 RD2121 1 RDW1206 1 RDW1206 2 RDW1211 2 RDW1211 2 RDW2106 2 RDW2106VSB54_34•2 3 RD1824 3 RD1824 3 RDW1806 3 RDW1806VSB54_34•4 2 RD2124 2 RD2124 3 RDW1206 3 RDW1206 1 RDW1211 1 RDW1211 2 RDW2106 2 RDW2106VSB60_31•3 2 RD1921 2 RD1921 1 RDW1806 1 RDW1806 2 RDW1811 2 RDW1811 2 RDW2006 2 RDW2006VSB60_34•2 2 RD1424 2 RD1424 2 RD1524 2 RD1524 2 RDW1506 2 RDW1506 1 RDWVSB6006 1 RDWVSB6006
VSB60_34•4 2 RD1924 2 RD1924 3 RDW1806 3 RDW1806 1 RDW1811 1 RDW1811 2 RDW2006 2 RDW2006VW1530 1 RD1530 1 RD1530VWB2430BUTT 2 RDB2424 2 RDB2424VWB2648 2 RD1227 2 RD1227W1224 1 RD1224 1 RD1224W1230 1 RD1230 1 RD1230W1236 1 RD1236 1 RD1236W1239 1 RD1239 1 RD1239W1242 1 RD1242 1 RD1242W1524 1 RD1524 1 RD1524W1530 1 RD1530 1 RD1530W1536 1 RD1536 1 RD1536W1539 1 RD1539 1 RD1539W1542 1 RD1542 1 RD1542W1824 1 RD1824 1 RD1824W1830 1 RD1830 1 RD1830W1836 1 RD1836 1 RD1836W1839 1 RD1839 1 RD1839W1842 1 RD1842 1 RD1842W2124 1 RD2124 1 RD2124W2130 1 RD2130 1 RD2130W2136 1 RD2136 1 RD2136W2139 1 RD2139 1 RD2139W2142 1 RD2142 1 RD2142W2418 1 RD2418 1 RD2418W2418BUTT 2 RDB2418 2 RDB2418W2424 1 RD2424 1 RD2424W2424BUTT 2 RDB2424 2 RDB2424W2430 1 RD2430 1 RD2430W2430BUTT 2 RDB2430 2 RDB2430W2436 1 RD2436 1 RD2436W2436BUTT 2 RDB2436 2 RDB2436W2439 1 RD2439 1 RD2439W2439BUTT 2 RDB2439 2 RDB2439W2442 1 RD2442 1 RD2442W2442BUTT 2 RDB2442 2 RDB2442W2712(Butt) 2 RD2712 2 RD2712W2715(Butt) 2 RD2715 2 RD2715W2718(Butt) 2 RD2718 2 RD2718W2724(Butt) 2 RD2724 2 RD2724W2730(Butt) 2 RD2730 2 RD2730W2736(Butt) 2 RD2736 2 RD2736W2739(Butt) 2 RD2739 2 RD2739W2742(Butt) 2 RD2742 2 RD2742W3012BUTT 2 RD3012 2 RD3012W3015BUTT 2 RD3015 2 RD3015W3018BUTT 2 RD3018 2 RD3018W3021BUTT 2 RD3021 2 RD3021W3024BUTT 2 RD3024 2 RD3024W3027BUTT 2 RD3027 2 RD3027W3030BUTT 2 RD3030 2 RD3030W3036BUTT 2 RD3036 2 RD3036W3039BUTT 2 RD3039 2 RD3039W3042BUTT 2 RD3042 2 RD3042W3312BUTT 2 RDB3312 2 RDB3312W3315BUTT 2 RDB3315 2 RDB3315W3318BUTT 2 RDB3318 2 RDB3318W3321BUTT 2 RDB3321 2 RDB3321W3324BUTT 2 RDB3324 2 RDB3324W3327BUTT 2 RDB3327 2 RDB3327W3330BUTT 2 RDB3330 2 RDB3330W3336BUTT 2 RDB3336 2 RDB3336W3339BUTT 2 RDB3339 2 RDB3339W3342BUTT 2 RDB3342 2 RDB3342W3612BUTT 2 RD3632 2 RD3632W3615BUTT 2 RD3635 2 RD3635W3618BUTT 2 RD3618 2 RD3618W3621BUTT 2 RD3621 2 RD3621W3624BUTT 2 RD3624 2 RD3624W3627BUTT 2 RD3627 2 RD3627
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Full Overlay Partial OverlayCabinet Qty Door Code Qty Door Code
Replacement Parts
Door & Drawer Fronts - Part Index L13
W3630BUTT 2 RD3630 2 RD3630W3636BUTT 2 RD3636 2 RD3636W3639BUTT 2 RD3639 2 RD3639W3642BUTT 2 RD3642 2 RD3642W3912 2 RD3912 2 RD3912W3915 2 RD3915 2 RD3915W3918 2 RD3918 2 RD3918W3921 2 RD3921 2 RD3921W3924 2 RD3924 2 RD3924W3927 2 RD3927 2 RD3927W3930 2 RD3930 2 RD3930W3936 2 RD3936 2 RD3936W3939 2 RD3939 2 RD3939W3942 2 RD3942 2 RD3942W4212 2 RD2112 2 RD2112W4215 2 RD2115 2 RD2115W4218 2 RD2118 2 RD2118W4221 2 RD2121 2 RD2121W4224 2 RD2124 2 RD2124W4227 2 RD2127 2 RD2127W4230 2 RD2130 2 RD2130W4236 2 RD2136 2 RD2136W4239 2 RD2139 2 RD2139W4242 2 RD2142 2 RD2142W4512 2 RD4512 2 RD4512W4515 2 RD4515 2 RD4515W4518 2 RD4518 2 RD4518W4524 2 RD4524 2 RD4524W4530 2 RD4530 2 RD4530W4812 2 RD2412 2 RD2412W4815 2 RD2415 2 RD2415W4818 2 RD2418 2 RD2418W4824 2 RD2424 2 RD2424W4830 2 RD2430 2 RD2430W930 1 RD0930 1 RD0930W936 1 RD0936 1 RD0936W939 1 RD0939 1 RD0939W942 1 RD0942 1 RD0942WA2430 1 RD1530 1 RD3330WA2436 1 RD1536 1 RD3336WA2439 1 RD1539 1 RD3339WA2442 1 RD1542 1 RD3342WA2730 1 RD1530 1 RD3330WA2736 1 RD1536 1 RD3336WA2739 1 RD1539 1 RD3339WA2742 1 RD1542 1 RD3342WBC2730 1 RDWBC2430 1 RDWBC2430WBC2736 1 RDWBC2436 1 RDWBC2436WBC2739 1 RDWBC2439 1 RDWBC2439WBC2742 1 RDWBC2442 1 RDWBC2442WBC3024 1 RDWBC2724 1 RDWBC2724WBC3030 1 RDWBC2730 1 RDWBC2730WBC3036 1 RDWBC2736 1 RDWBC2736WBC3039 1 RDWBC2739 1 RDWBC2739WBC3042 1 RDWBC2742 1 RDWBC2742WBC3330 1 RD3330 1 RD3330WBC3336 1 RD3336 1 RD3336WBC3339 1 RD3339 1 RD3339WBC3342 1 RD3342 1 RD3342WBC3630 1 RD3930 1 RD3930WBC3924 1 RD4524 1 RD4524WBC3930 1 RD4530 1 RD4530WBC3936 1 RD4536 1 RD4536WBC3939 1 RD4539 1 RD4539WBC3942 1 RD4542 1 RD4542WBC4530 1 RD1530 1 RD1530 1 RDWBC2730 1 RDWBC2730WBC5130 1 RD1830 1 RD1830 1 RD3330 1 RD3330WCA1230 1 RD3330 1 RD3330WCA1236 1 RD3336 1 RD3336WCA1239 1 RD3339 1 RD3339WCA1242 1 RD3342 1 RD3342
WEC1230 2 RD0930 2 RD0930WEC1236 2 RD0936 2 RD0936WEC1239 2 RD0939 2 RD0939WEC1242 2 RD0942 2 RD0942WEZR2430 1 RDWEZR2430 1 RDWEZR2430WEZR2436 1 RDWEZR2436 1 RDWEZR2436WEZR2439 1 RDWEZR2439 1 RDWEZR2439WEZR2442 1 RDWEZR2442 1 RDWEZR2442WMC27_36 2 RD2715 2 RD2715WMC27_45 2 RD2724 2 RD2724WMC30_36 2 RD3015 2 RD3015WMC30_45 2 RD3024 2 RD3024WMSC24_36 2 RDB2415 2 RDB2415WMSC27_30 2 RD2712 2 RD2712WMSC27_36 2 RD2715 2 RD2715WMSC27_42 2 RD2718 2 RD2718WR3012BUTT 2 RD3012 2 RD3012WR3015BUTT 2 RD3015 2 RD3015WR3018BUTT 2 RD3018 2 RD3018WR3312BUTT 2 RDB3312 2 RDB3312WR3315BUTT 2 RDB3315 2 RDB3315WR3318BUTT 2 RDB3318 2 RDB3318WR3612BUTT 2 RD3612 2 RD3632WR3615BUTT 2 RD3615 2 RD3635WR3618BUTT 2 RD3618 2 RD3618WR3624BUTT 2 RD3624 2 RD3624WR3627BUTT 2 RD3627 2 RD3627WR3912 2 RD1812 2 RD1812WR3915 2 RD3915 2 RD3915WR3918 2 RD3918 2 RD3918WR3924 2 RD3924 2 RD3924WR3927 2 RD3927 2 RD3927WR4212 2 RD2112 2 RD2112WR4218 2 RD2118 2 RD2118WR4224 2 RD2124 2 RD2124
Repl
acem
ent P
arts
Door & Drawer FrontsL14
Door Style Index
CodeDoorStyleOverlay
AF6C1 AmbridgeCherry FullAF6M1 AmbridgeMaple FullAF5C1 BellwetherCherry FullAF5M1 BellwetherMaple FullAF7C1 ChesterhillCherry FullAF7M1 ChesterhillMaple FullAF3C1 FlaxtonCherry FullAF3M1 FlaxtonMaple FullAE7C1 FoxPointeCherry FullAE7M1 FoxPointeMaple FullAF1C1 GlenmoorCherry PartialAF1M1 GlenmoorMaple PartialAF1O1 GlenmoorOak PartialAF2C1 RextonCherry FullAF2M1 RextonMaple FullAE6C1 TalmadgeCherry FullAE6M1 TalmadgeMaple FullAE6O1 TalmadgeOak Full
Replacement Parts
Door & Drawer Fronts - Sizes L15
PART FullOverlay PartialOverlay
RDB2463•B 113/4x611/8 111/16x601/2
RD3663•B 173/4x611/8 171/16x601/2
RD3063•B 143/4x611/8 141/16x601/2
RD2463•B 235/8x611/8 221/4x601/2
RD1863•B 175/8x611/8 161/4x601/2
RD1563•B 145/8x611/8 131/4x601/2
RD0956•B N/A 85/8x555/8
RD1848•Bor•W 175/8x471/4 161/4x46
RDWEZR2442S 1015/16x411/4 101/4x40
RDWBC2742 131/8x411/4 113/4x40
RDWBC2442 101/8x411/4 83/4x40
RDB3342•Bor•W 161/4x411/4 159/16x40
RDB2442•Bor•W 113/4x411/4 111/16x40
RD4542•Bor•W 221/8x411/4 203/4x40
RD3942•Bor•W 191/8x411/4 173/4x40
RD3642•Bor•W 173/4x411/4 171/16x40
RD3342•Bor•W 161/8x411/4 143/4x40
RD3042•Bor•W 143/4x411/4 141/16x40
RD2742•Bor•W 131/4x411/4 129/16x40
RD2442•Bor•W 235/8x411/4 221/4x40
RD2142•Bor•W 205/8x411/4 191/4x40
RD1842•Bor•W 175/8x411/4 161/4x40
RD1542•Bor•W 145/8x411/4 131/4x40
RD1242•Bor•W 115/8x411/4 101/4x40
RD0942•Bor•W 85/8x411/4 71/4x40
SIncludes2doorshingedtogether—sizelistedisforonedoor
RDWEZR2439S 1015/16x381/4 101/4x37
RDWBC2739 131/8x381/4 113/4x37
RDWBC2439 101/8x381/4 83/4x37
RDB3339•Bor•W 161/4x381/4 159/16x37
RDB2439•Bor•W 113/4x381/4 111/16x37
RD4539•Bor•W 221/8x381/4 203/4x37
RD3939•Bor•W 191/8x381/4 173/4x37
RD3639•Bor•W 173/4x381/4 171/16x37
RD3339•Bor•W 161/8x381/4 143/4x37
RD3039•Bor•W 143/4x381/4 141/16x37
RD2739•Bor•W 131/4x381/4 129/16x37
RD2439•Bor•W 235/8x381/4 221/4x37
RD2139•Bor•W 205/8x381/4 191/4x37
RD1839•Bor•W 175/8x381/4 161/4x37
RD1539•Bor•W 145/8x381/4 131/4x37
RD1239•Bor•W 115/8x381/4 101/4x37
RD0939•Bor•W 85/8x381/4 71/4x37
SIncludes2doorshingedtogether—sizelistedisforonedoor
RD3638•Bor•W 173/4x171/4 N/A
RDWEZR2436S 1015/16x351/4 101/4x34
RDWBC2736 131/8x351/4 113/4x34
RDWBC2436 101/8x351/4 83/4x34
RDB3336•Bor•W 161/4x351/4 159/16x34
RDB2436•Bor•W 113/4x351/4 111/16x34
RD4536•Bor•W 221/8x351/4 203/4x34
RD3936•Bor•W 191/8x351/4 173/4x34
RD3636•Bor•W 173/4x351/4 171/16x34
Door & Drawer Fronts - SizesL16
Repl
acem
ent P
arts
RD3336 161/8x351/4 143/4x34
RD3036•Bor•W 143/4x351/4 141/16x34
RD2736•Bor•W 131/4x351/4 129/16x34
RD2436•Bor•W 235/8x351/4 221/4x34
RD2136•Bor•W 205/8x351/4 191/4x34
RD1836•Bor•W 175/8x351/4 161/4x34
RD1536•Bor•W 145/8x351/4 131/4x34
RD1236•Bor•W 115/8x351/4 101/4x34
RD0936•Bor•W 85/8x351/4 71/4x34
SIncludes2doorshingedtogether—sizelistedisforonedoor
RDWEZR2430S 1015/16x291/4 101/4x28
RDWBC2730 131/8x291/4 113/4x28
RDWBC2430 101/8x291/4 83/4x28
RDBPP0930•B 85/8x291/4 71/4x28
RDBCA2430•Bor•W 1615/32x291/4 1525/32x28
RDB3330•Bor•W 161/4x291/4 159/16x28
RDB2430•Bor•W 113/4x291/4 111/16x28
RD4530•Bor•W 221/8x291/4 203/4x28
RD3930•Bor•W 191/8x291/4 173/4x28
RD3630•Bor•W 173/4x291/4 171/16x28
RD3330•Bor•W 161/8x291/4 143/4x28
RD3030•Bor•W 143/4x291/4 141/16x28
RD2730•Bor•W 131/4x291/4 129/16x28
RD2430•Bor•W 235/8x291/4 221/4x28
RD2130•Bor•W 205/8x291/4 191/4x28
RD1830•Bor•W 175/8x291/4 161/4x28
RD1530•Bor•W 145/8x291/4 131/4x28
RD1430•Bor•W 14x291/4 125/8x28
RD1230•Bor•W 115/8x291/4 101/4x28
RD0930•Bor•W 85/8x291/4 71/4x28
SIncludes2doorshingedtogether—sizelistedisforonedoor
RDVHB1827•B 175/8x261/4 161/4x25
RDEZR3627•B 1015/16x261/4 101/4x25
RDB3327•Bor•W 161/4x261/4 159/16x25
RDB2427•Bor•W 113/4x261/4 111/16x25
RD4527•Bor•W 221/8x261/4 203/4x25
RD3927•Bor•W 191/8x261/4 173/4x25
RD3627•Bor•W 173/4x261/4 171/16x25
RD3027•Bor•W 143/4x261/4 141/16x25
RD2727•Bor•W 131/4x261/4 129/16x25
RD2427•Bor•W 235/8x261/4 221/4x25
RD2127•Bor•W 205/8x261/4 191/4x25
RD1827•Bor•W 175/8x261/4 161/4x25
RD1527•Bor•W 145/8x261/4 131/4x25
RD1427•Bor•W 14x261/4 125/8x25
RD1227•Bor•W 115/8x261/4 101/4x25
RD0927•Bor•W 85/8x261/4 71/4x25
RDWBC2724 131/8x223/4 113/4x211/2
RDSFA4224•B 231/8x223/4 231/4x211/2
RDSFA3924•B 187/8x223/4 19x211/2
RDBWBT1824•B 175/8x223/4 161/4x211/2
RDBWBT1524•B 145/8x223/4 131/4x211/2
RDBBC3924•B 131/8x223/4 113/4x211/2
RDBBC3624•B 101/8x223/4 83/4x211/2
RDB3324•Bor•W 161/4x223/4 159/16x211/2
RDB2424•Bor•W 113/4x223/4 111/16x211/2
PART FullOverlay PartialOverlay
Replacement Parts
Door & Drawer Fronts - Sizes L17
RD4524•Bor•W 221/8x223/4 203/4x211/2
RD3924•Bor•W 191/8x223/4 173/4x211/2
RD3624•Bor•W 173/4x223/4 171/16x211/2
RD3324•Bor•W 161/8x223/4 143/4x211/2
RD3024•Bor•W 143/4x223/4 141/16x211/2
RD2724•Bor•W 131/4x223/4 129/16x211/2
RD2424•Bor•W 235/8x223/4 221/4x211/2
RD2124•Bor•W 205/8x223/4 191/4x211/2
RD1924•Bor•W 20x223/4 185/8x211/2
RD1824•Bor•W 175/8x223/4 161/4x211/2
RD1524•Bor•W 145/8x223/4 131/4x211/2
RD1424•Bor•W 14x223/4 125/8x211/2
RD1224•Bor•W 115/8x223/4 101/4x211/2
RDB3321•Bor•W 161/4x193/4 159/16x181/2
RDB2421•Bor•W 113/4x193/4 111/16x181/2
RD3921•Bor•W 191/8x193/4 173/4x181/2
RD3621•Bor•W 173/4x193/4 171/16x181/2
RD3321•Bor•W 161/8x193/4 143/4x181/2
RD3021•Bor•W 143/4x193/4 141/16x181/2
RD2721•Bor•W 131/4x193/4 129/16x181/2
RD2421•Bor•W 235/8x193/4 221/4x181/2
RD2121•Bor•W 205/8x193/4 191/4x181/2
RD1921•Bor•W 20x193/4 185/8x181/2
RD1821•Bor•W 175/8x193/4 161/4x181/2
RD1521•Bor•W 145/8x193/4 131/4x181/2
RD1421•Bor•W 14x193/4 125/8x181/2
RD1221•Bor•W 115/8x193/4 101/4x181/2
RDB3318•Bor•W 161/4x171/4 159/16x16
RDB2418•Bor•W 113/4x171/4 111/16x16
RD4518•Bor•W 221/8x171/4 203/4x16
RD3918•Bor•W 191/8x171/4 173/4x16
RD3618•Bor•W 173/4x171/4 171/16x16
RD3018•Bor•W 143/4x171/4 141/16x16
RD2718•Bor•W 131/4x171/4 129/16x16
RD2418•Bor•W 235/8x171/4 221/4x16
RD2118•Bor•W 205/8x171/4 191/4x16
RD1818•Bor•W 175/8x171/4 161/4x16
RD1518•Bor•W 145/8x171/4 131/4x16
RDW3616 141/2x355/8 131/4x341/4
RDW3316 141/2x325/8 131/4x311/4
RDW3016 141/2x295/8 131/4x281/4
RDW2716
141/2x265/8 131/4x251/4
RDB3315•Bor•W 161/4x141/4 159/16x13
RDB2415•Bor•W 113/4x141/4 111/16x13
RD4515•Bor•W 221/8x141/4 203/4x13
RD3915•Bor•W 191/8x141/4 173/4x13
RD3615•Bor•W 173/4x141/4 N/A
RD3015•Bor•W 143/4x141/4 141/16x13
RD2715•Bor•W 131/4x141/4 129/16x13
RD2415•Bor•W 235/8x141/4 221/4x13
RD2115•Bor•W 205/8x141/4 191/4x13
RDW3615 113/16x355/8 103/8x341/4
RDW3315 113/16x325/8 103/8x311/4
RDW3015 113/16x295/8 103/8x281/4
PART FullOverlay PartialOverlay
Door & Drawer Fronts - SizesL18
Repl
acem
ent P
arts
RDW2715 113/16x265/8 103/8x251/4
RDW2415 113/16x235/8 103/8x221/4
RDW2115 113/16x205/8 103/8x191/4
RDW1815 113/16x175/8 103/8x161/4
RDW1515 113/16x145/8 103/8x131/4
RDW1215 113/16x115/8 103/8x101/4
RDW2414 93/4x235/8 9x221/4
RDW2413 103/4x235/8 9x221/4
RDW2113 103/4x205/8 9x191/4
RDW1813 103/4x175/8 9x161/4
RDW1513 103/4x145/8 9x131/4
RDW1213 103/4x115/8 9x101/4
RDW2412 93/4x235/8 9x221/4
RDB3312•Bor•W 161/4x111/4 159/16x10
RD4512•Bor•W 221/8x111/4 203/4x10
RD3912•Bor•W 191/8x111/4 173/4x10
RD3612•Bor•W 173/4x111/4 N/A
RD3012•Bor•W 143/4x111/4 141/16x10
RD2712•Bor•W 131/4x111/4 129/16x10
RD2412•Bor•W 235/8x111/4 221/4x10
RD2112•Bor•W 205/8x111/4 191/4x10
RD1812•Bor•W 175/8x111/4 161/4x10
RDW2711 93/4x265/8 9x251/4
RDW2411 93/4x235/8 9x221/4
RDW2111 93/4x205/8 9x191/4
RDW1811 93/4x175/8 9x161/4
RDW1511 93/4x145/8 9x131/4
RDW1211 93/4x115/8 9x101/4
RDWVSB6006 61/8x283/8 51/2x27
RDWSFA4206 61/8x231/8 51/2x231/4
RDWSFA3906 61/8x187/8 51/2x19
RDWBBC4806 61/8x221/8 N/A
RDWBBC4506 61/8x191/8 51/2x173/4
RDWBBC4206 61/8x161/8 51/2x143/4
RDWBBC3906 61/8x131/8 51/2x113/4
RDWBBC3606 61/8x101/8 51/2x83/4
RDW3606.UT 61/8x355/8 51/2x341/4
RDW3306.UT 61/8x325/8 51/2x311/4
RDW3006.UT 61/8x295/8 51/2x281/4
RDW2406.UBT 61/8x235/8 51/2x221/4
RDW4506 61/8x221/8 51/2x203/4
RDW3906 61/8x385/8 51/2x371/4
RDW3606 61/8x355/8 51/2x341/4
RDW3306 61/8x325/8 51/2x311/4
RDW3006 61/8x295/8 51/2x281/4
RDW2706 61/8x265/8 51/2x251/4
RDW2406 61/8x235/8 51/2x221/4
RDW2106 61/8x205/8 51/2x191/4
RDW2006 61/8x20 51/2x185/8
RDW1806 61/8x175/8 51/2x161/4
RDW1706 N/A 51/2x143/4
RDW1506 61/8x145/8 51/2x131/4
RDW1206 61/8x115/8 51/2x101/4
PART FullOverlay PartialOverlay
Replacement Parts
Door & Drawer Fronts - Sizes L19
RDW3604 41/8x355/8 31/2x341/4
RDW3004 41/8x295/8 31/2x281/4
RDW2404 41/8x235/8 31/2x221/4
RDW1804 41/8x175/8 31/2x161/4
RDEZR36•BS 1015/16x291/4 101/4x28
RDEZR33•BS 715/16x291/4 71/4x28
RDDFD24•Bor•W 235/8x171/4 221/4x16
RDDFD21•Bor•W 205/8x171/4 191/4x16
RDDFD18•Bor•W 175/8x171/4 161/4x16
RDDFD15•Bor•W 145/8x171/4 131/4x16
SIncludes2doorshingedtogether—sizelistedisforonedoor
PART FullOverlay PartialOverlay
L20
Repl
acem
ent P
arts
Drawer Box Dimensions Drawer Box Dimensions
RBDK1218 87/16x143/4x7
RBDK1221 87/16x1711/16x7
RBDK1224 87/16x2011/16x7
RBDK1518 117/16x143/4x7
RBDK1521 117/16x1711/16x7
RBDK1524 117/16x2011/16x7
RBDK1818 147/16x143/4x7
RBDK1821 147/16x1711/16x7
RBDK1824 147/16x2011/16x7
RBDK2118 177/16x143/4x7
RBDK2121 177/16x1711/16x7
RBDK2124 177/16x2011/16x7
RBDK2418 207/16x143/4x7
RBDK2421 207/16x1711/16x7
RBDK2424 207/16x2011/16x7
RBDK2724 237/16x2011/16x7
RBDK3024 267/16x2011/16x7
RBDK3324 297/16x2011/16x7
RBDK3624 327/16x2011/16x7
RBBPK2724.2 231/2x2023/32x10
RBBPK3024.2 261/2x2023/32x10
RBBPK3324.2 291/2x2023/32x10
RBBPK3624.2 321/2x2023/32x10
RBDKDK1821 147/16x1711/16x2
RBDKDK2421 207/16x1711/16x2
RBDKDK3021 267/16x1711/16x2
RBK1224 87/16x2011/16x315/16
RBK1221 87/16x1711/16x315/16
RBK1218 87/16x143/4x315/16
RBK1524 117/16x2011/16x315/16
RBK1518 117/16x143/4x315/16
RBK1521 117/16x1711/16x315/16
RBK1821 147/16x1711/16x315/16
RBK1818 147/16x143/4x315/16
RBK1824 147/16x2011/16x315/16
RBK2118 177/16x143/4x315/16
RBK2121 177/16x1711/16x315/16
RBK2124 177/16x2011/16x315/16
RBK4524 1815/16x2011/16x315/16
RBK2418 207/16x143/4x315/16
RBK2421 207/16x1711/16x315/16
RBK2424 207/16x2011/16x315/16
RBK2724 237/16x2011/16x315/16
RBK3024 267/16x2011/16x315/16
RBK3324 297/16x2011/16x315/16
RBK3624 327/16x2011/16x315/16
RBK4024 357/16x2011/16x315/16
RBDKDK3621 327/16x1711/16x2
RBKBBC3624 615/16x2011/16x315/16
RBKBBC3924 915/16x2011/16x315/16
RBKBBC4224 1215/16x2011/16x315/16
RBKBBC4524 1515/16x2011/16x315/16
RBKVSB3621 615/16x1711/16x315/16
Drawer Boxes
Universal D
esign Cabinets
M1Universal Cabinets
Universal Cabinets Construction Options and Modifications
I - - - Available with exceptions l - - - - Available with an upcharge v - - - - Included as standard (Blank) - Not Available
We manufacture cabinets that are readily used in floor plans that meet current ADA Accessibility Guidelines for Building and Facilities (ADAAG) guidelines. The primary responsibility to make a space comply with these guidelines is on the architect or space planner. Our products can be used to help satisfy the storage needs and accessibility requirements of disabled persons but depends on the knowledge, skill and creativity of the design professional and proper installation of these products. ADA Accessibility Guidelines for buildings and facilities can be visited online at: www.access -board.gov/adaag/html/adaag.htmq.
All double door cabinets will have butt doors unless stated otherwise. When BUTT is in all capitals, it must be included as part of your ordering nomenclature. A (Butt) in parentheses is for your information and isn’t required on an order form.
Material dimensions may vary slightly based on lumber industry standards.
Specifications subject to change without notice.
PE - - - - - - - - Plywood Ends APC - - - - - - All Plywood Construction RD12 - - - - - - Reduce Depth 12” RD15 - - - - - - Reduce Depth 15” RD18 - - - - - - Reduce Depth 18” RD21 - - - - - - Reduce Depth 21” 1ROT - - - - - 1 Roll -out Tray 2ROT - - - - - 2 Roll -out Trays 4ROT - - - - - 4 Roll -out Trays 1FWROT - - - 1 Full Width Tray 2FWROT - - - 2 Full Width Trays 2DROT - - - - 2 Deep Roll -out Trays 4DROT - - - - 4 Deep Roll -out Trays 2DFWROT - - 2 Deep Full Width Roll -out Trays CFO - - - - - - Cabinet Front Only
UB 12 R •FHcode width hinge suffix
Universal Base Single Door
Specify R or L
UB12 R or L
UB15 R or L
UB18 R or L
UB21 R or L
UB24 R or L
• Onestandarddrawer I When depth is reduced to 12” or 15”,
drawers become a false front I Deep Roll -out Trays (DROT) or Deep
Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
I Roll -out Trays (ROT) cannot be included when a Reduced Depth (RD) option of less than 18” is selected
l PE
l APC
I RD12
I RD15
l RD18
l RD21
I 1ROT
I 2ROT
4ROT
1FWROT
2FWROT
I 2DROT
4DROT
2DFWROT
l CFO
32 ½˝
24˝
I When depth is reduced to 12” or 15”, drawers become a false front
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
I Roll -out Trays (ROT) cannot be included when a Reduced Depth (RD) option of less than 18” is selected
l PE
l APC
I RD12
I RD15
l RD18
l RD21
1ROT
I 2ROT
I 4ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
I 2DFWROT
l CFO
UB24 BUTT-UB36 BUTT
32 ½˝
24˝
32 ½˝
24˝ UB42
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
One Drawer
n UB24 BUTT
n UB27 (Butt)
n UB30 BUTT
n UB33 BUTT
n UB36 BUTT
Two Drawers
u UB42
Universal Base Double Door
Uni
vers
al D
esig
n Ca
bine
ts
M2 Universal Cabinets
Universal Base Single Door w/Two Full-Width Trays
Specify R or L
UB12 R or L•2FWT
UB15 R or L•2FWT
UB18 R or L•2FWT
UB21 R or L•2FWT
UB24 R or L•2FWT
• Onestandarddrawer • TwoFull-widthRoll-outTrays(FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Single Door w/Two Deep Full-Width Trays
Specify R or L
UB12 R or L•2DFWT
UB15 R or L•2DFWT
UB18 R or L•2DFWT
UB21 R or L•2DFWT
UB24 R or L•2DFWT
• Onestandarddrawer • TwoDeepFull-widthRoll-outTrays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Double Door w/Two Full-Width Trays
UB24 BUTT•2FWT
UB27 (Butt)•2FWT
UB30 BUTT•2FWT
UB33 BUTT•2FWT
UB36 BUTT•2FWT
• Onestandarddrawer • TwoFull-widthRoll-outTrays(FWROT)
Remember, when designing a space for storing heavy items, avoid using 30 -36” wide roll -out
trays. These units are not designed for extremely heavy loads.
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Double Door w/Two Deep Full-Width Trays
UB24 BUTT•2DFWT
UB27 (Butt)•2DFWT
UB30 BUTT•2DFWT
UB33 BUTT•2DFWT
UB36 BUTT•2DFWT
• Onestandarddrawer • TwoDeepFull-widthRoll-outTrays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal D
esign Cabinets
M3Universal Cabinets
Universal Base Double Door w/Four Trays
UB42 •4T • Twostandarddrawers • FourstandardRoll-outTrays(ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Double Door w/Four Deep Trays
UB42 •4DT • Twostandarddrawers • FourDeepRoll-outTrays(DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Pull-out Table
UBT24 BUTT • Topdrawerisreplacedwithfullwidth20 1/4” wide, solid wood, pull -out tambour table with natural lacquer finish
• Pullouttophashardwoodtelescopingslides
• Pull-outtableextends30”fromfrontofcabinet on telescoping hardwood slides
• Drawerfrontmust be attached to pullout table by installer. Hardware and instructions included
• Not intended to be used as a chopping block
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
l 1FWROT
l 2FWROT
2DROT
4DROT
l 2DFWROT
CFO
32 ½˝
24˝
Universal Base Pull-Out Table w/Two Full-Width Trays
UBT24 BUTT•2FWT • Topdrawerisreplacedwithfullwidth20 1/4” wide, solid wood, pull -out tambour table with natural lacquer finish
• Pullouttophashardwoodtelescopingslides
• Pull-outtableextends30”fromfrontofcabinet on telescoping hardwood slides
• Drawerfrontmust be attached to pullout table by installer. Hardware and instructions included
• Not intended to be used as a chopping block
• TwoFull-widthRoll-outTrays(FWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Uni
vers
al D
esig
n Ca
bine
ts
M4 Universal Cabinets
Universal Base Pull-Out Table w/Two Deep Full-Width Trays
UBT24 BUTT•2DFWT • Topdrawerisreplacedwithfullwidth20 1/4” wide, solid wood, pull -out tambour table with natural lacquer finish
• Pullouttophashardwoodtelescopingslides
• Pull-outtableextends30”fromfrontofcabinet on telescoping hardwood slides
• Drawerfrontmust be attached to pullout table by installer. Hardware and instructions included
• Not intended to be used as a chopping block
• TwoDeepFull-widthRoll-outTrays(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Single Door
Specify R or L
I UB9 R or L•FH
UB12 R or L•FH
UB15 R or L•FH
UB18 R or L•FH
UB24 R or L•FH
• Full-heightdoor • Oneadjustableshelf I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) or Deep Full -width Roll -out Trays (DFWROT) are not available with reduced depth options
l PE
l APC
l RD12
l RD15
l RD18
l RD21
I 1ROT
I 2ROT
4ROT
1FWROT
2FWROT
I 2DROT
4DROT
2DFWROT
l CFO
32 ½˝
24˝
I Roll -out Trays (ROT) are not available
Universal Base Full-Height Single Door w/Two Full-Width Trays
Specify R or L
UB12 R or L•FH•2FWT
UB15 R or L•FH•2FWT
UB18 R or L•FH•2FWT
UB24 R or L•FH•2FWT
• Full-heightdoor • TwoFull-widthRoll-outTrays(FWROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Single Door w/Two Deep Full-Width Trays
Specify R or L
UB12 R or L•FH•2DFWT
UB15 R or L•FH•2DFWT
UB18 R or L•FH•2DFWT
UB24 R or L•FH•2DFWT
• Full-heightdoor • TwoDeepFull-widthRoll-outTrays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal D
esign Cabinets
M5Universal Cabinets
Universal Base Full-Height Double Door
n UB24 BUTT•FH
n UB27 (Butt)•FH
n UB30 BUTT•FH
n UB33 BUTT•FH
n UB36 BUTT•FH
u UB39 •FH
u UB42 •FH
u UB45 •FH
u UB48 •FH
• Full-heightdoors I Roll -out Trays (ROT) cannot be included
when a Reduced Depth (RD) option of less than 18” is selected
I Deep Roll -out Trays (DROT) are only available in cabinets 24” deep
l PE
l APC
l RD12
l RD15
l RD18
l RD21
1ROT
I 2ROT
I 4ROT
I 1FWROT
I 2FWROT
2DROT
I 4DROT
I 2DFWROT
l CFO
32 ½˝
24˝
n Available with Full -width Roll -out Trays (FWROT) or Deep Full -width Roll -out Trays (DFWROT) only
u Available with standard -width Roll -out Trays (ROT) or Deep Roll -out Trays (DROT) only
Universal Base Full-Height Double Door w/Two Full-Width Trays
UB24 BUTT•FH•2FWT
UB27 (Butt)•FH•2FWT
UB30 BUTT•FH•2FWT
UB33 BUTT•FH•2FWT
UB36 BUTT•FH•2FWT
• Full-heightdoors • TwoFull-widthRoll-outTrays(FWROT)
Remember, when designing a space for storing heavy items, avoid using 30 -36” wide roll -out
trays. These units are not designed for extremely heavy loads.
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Double Door w/Two Deep Full-Width Trays
UB24 BUTT•FH•2DFWT
UB27 (Butt)•FH•2DFWT
UB30 BUTT•FH•2DFWT
UB33 BUTT•FH•2DFWT
UB36 BUTT•FH•2DFWT
• Full-heightdoors • TwoDeepFull-widthRoll-outTrays
(DFWROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Full-Height Double Door w/Four Trays
UB39 •FH•4T
UB42 •FH•4T
UB45 •FH•4T
UB48 •FH•4T
• Full-heightdoors • FourstandardRoll-outTrays(ROT)
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Uni
vers
al D
esig
n Ca
bine
ts
M6 Universal Cabinets
14 /˝
12˝
24˝
12˝24˝
36˝
36˝
6˝
6˝
28˝ shelf
diameter
Universal Base Full-Height Double Door w/Four Deep Trays
UB39 •FH•4DT
UB42 •FH•4DT
UB45 •FH•4DT
UB48 •FH•4DT
• Full-heightdoors • FourDeepRoll-outTrays(DROT)
l PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Base Three Drawer
UBD12 •3
UBD15 •3
UBD18 •3
UBD21 •3
UBD24 •3
• Standardheighttopdrawer • Bottomdrawersaredeep
l PE
l APC
RD12
RD15
l RD18
l RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
l CFO
32 ½˝
24˝
Universal Lazy Susan
• Two28”diameterhighimpact,pie-cutrevolving white plastic shelves
• Shelvesrotateindependentlyofdoorsandeach other
• Shelfloadratingof15lbs.persquarefoot,not to exceed 50 lbs.
• Twopiecebi-folddoorwithindependentadjustment
• 168°openinghingesonfaceframedoor • FullOverlaydoorstylefaceframestiles
are notched to accept door hinges. Door hinging cannot be inverted in field
• Note: Back barrel will not be plywood when APC is ordered
PE
l APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
l CFO
32 ½˝
Universal Sink Front Doors
UBSF36 BUTT•FH • Full-heightdoor • Includesfrontframeandappropriate
doors only • Not trimmable • Notoekick • Bottompanelnot supplied, order
separately. See Sink Front Floor (SFF) in Base Accessories
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
27˝
36˝
Specify R or L
ULS36 R or L
Universal D
esign Cabinets
M7Universal Cabinets
Universal Sink Front Kit
USFCK30 BUTT•FH
USFCK33 BUTT•FH
USFCK36 BUTT•FH
USFCK42 •FH
• Full-heightdoor • ToeKickBackerassemblyshipped
unassembledtofloor • Includesfloor • 3/8”thickengineeredwoodbottompanel
witheasycleanlaminateononeside;backsideunfinished
• 1/2”thickengineeredwoodtoeboard
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Removable Sink Front
URSF30 BUTT
URSF33 BUTT
URSF36 BUTT
URSF42
• Designedforeasyfieldconversionfromastandardsinkbasefunctionalitytouniversalaccessopenspace
• Permanentlyinstalledcountertopsupportrailis3-1/2”highx 3/4”thicksolidwood
• Doorsandframeareshippedpre-assembled
• 3/4”thickremovableplywoodbottompanelwithsupporthardware/levelinglegsandaremovableclipped-ontoekickprovided
• Matchingsolidwoodbaseboardprovidedforbottompanelsupportalongthekitchenwall
• Frameattachedtobottompanelusingquickconnect(cam-locks)fastenersprovidingasolidtightjoint
• Somefieldassemblyrequired;instructionsandhardwareincluded
• CanbeusedwithUniversalAccessPanel(UAP)
CompleteflooringunderUniversalAccessRemovableSinkFronttoprepareforthefuturewhensink
frontandplywoodbottomisremoved.
PE
I APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
32 ½˝
24˝
Universal Toe Kick
Laminate
UMTK8
UMTK8 •4 Veneer
UWMTK8
UWMTK8 •4
• 5 7/16”highx96”longx 1/8”thickMDF(MediumDensityFiberboard)
• Matchingeasycleanlaminateononeside • Graindirectionrunslengthwise(when
applicable)
PE
APC
RD12
RD15
RD18
RD21
1ROT
2ROT
4ROT
1FWROT
2FWROT
2DROT
4DROT
2DFWROT
CFO
96˝
5 /˝
Uni
vers
al D
esig
n Ca
bine
ts
M8 Notes
Notes
Code Page Code Page Code Page Code Page Code Page
1 1FWROT C12
1ROT C11
2 2DFWROT C13
2DROT C12
2FWROT C12
2ROT C11
3 3ROT C11
4 4DROT C13
4ROT C11
6 6DROT C13
6ROT C12
a ACM K2
AE6C1 A3
AE6M1 A6
AE6O1 A7
AE7C1 A2
AE7M1 A5
AF1C1 A2
AF1M1 A5
AF1O1 A7
AF2C1 A2
AF2M1 A6
AF3C1 A2
AF3M1 A5
AF5C1 A1
AF5M1 A4
AF6C1 A1
AF6M1 A4
AF7C1 A1
AF7M1 A5
AOSC K3
AP C8
APC C8
B B E1, E2, E3, E4, E5, E6, E7
BB E32
BBC E19
BC E33
BCA E23
BCD E8, E9
BCFS E22
BD E9, E10
BEA E23
BEC E23
BEP E33
BEPL J2
BF E32
BFC E33
BFF E32
BFOL E32
BFP3 E24
BFP6 E24
BIS C10
BMC E17
BOCU E16
BPP E24
BPPS E9
BWBFMK E26
BWBT E24, E25
C CBB K7
CCM K2
CCM8 K2
CD E30
CFO C9
CGPB J2
CM K2
CR K4
CTC K2
CTS K1
CTWE K4
d DDO H1
DDR H1
DEP H3
DFD H2
DIP E16
DKD H2
DKDT H2
DM K8
DMTB E28
DOKN E29
DOKW E29
DOS D21
DPK E28
DPR F4
DROT J5
DROTFX J5
DRPD C9
DSB E13
DSR D24
DWP E17
e ECB K10
EFT K10
ELB K10
F FBRK18 E27
FE D25
FEP I1, I2
FFE D25
FS I2
FSTB I3
FTBV I3
g GR K8
H HK02 K14
HK107 K14
HK108 K14
HK109 K14
HK110 K15
HK111 K15
HK117 K15
HK119 K15
HK120 K20
HK123 K16
HK125 K16
HK126 K16
HK127 K16
HK128 K16
HK137 K17
HK138 K17
HK150 K17
HK152 K17
HK155 K17
HK157 K18
HK158 K18
HK161 K18
HK162 K18
HP103 K18
HP106 K19
HP112 K19
HP118 K19
HP124 K19
HP131 K19
HP135 K20
HP139 K20
HP140 K20
HP151 K20
HP153 K20
HP154 K21
HP156 K21
HP159 K21
HP160 K21
HP163 K21
HP164 K22
HP165 K22
HP166 K22
I ICM K3
ID C9
ILR K4
L LM K5
LS E21
LS18.1 D22
LS18.3 D23
LSA E22
LSK E26
LSTR K3
LW D15
M MBEP E34
MC G9
MDEP H4
MD C10
MI C8
MM K5
MTEP F6
MTK E31
MVEP G11
MWEP D26
N NBM K4
o O H3
OC F3
OCO D23
OCSP F5
ODK F3
OSC K4
P PB E7, E8
PBBC E19, E20
PC F2
PCSK F4
PDO E30
PE C7
PEB C7
PSP6X6 K13
PW D6, D7
PWA D12
PWBC D10
Q QR K6
R RCM K5
RD C9
RHB D19
RHF D18
RM K8
ROT J4, J6
ROTW J7
RSF E15
RSP K13
S SB E10, E11, E12
SBA E13
SBP K7
SBRE K5
SCM K3
SCV K6
SDC D20
SDIK15 E30
SDIK18 E30
SDIK21 E30
SDIK24 E30
SF E14
SFA E14
SFAF E31
SFF E31
SGH D23
SHO K7
SK J3
SM K6
Nom
enclature Index
N1
Code Page Code Page Code Page Code Page Code PageN
omen
clat
ure
Inde
x
N2
SP K13
SPM K6
SPR F4
STB E28
STR8 K3
SV C10
SWEOS D13
SWS4 K9
SWS6 K9
SWS8 K9
T TBB K7
TBE K5
TBP K8
TCB K11
TEP F6
TF F5
TFF F5
TFOL F5
TFT K11
TIM K8
TKBK E31
TLB K11
TPL K12
TS D20
TSA D20
TV G9
U U F1, F2
UAP E15
UB M1, M2, M3, M4, M5, M6
UBD M6
UBSF M7
UBT M3, M4
UCM K6
UCS D22
UCSC D22
ULS M6
UMTK M5
URSF M7
USFCK M7
UST E27
UTK12 E30
UTK22 E30
UWMTK M5
V V K1
VB G5, G6
VBD G7
VCD G3, G4
VF G10
VFF G10
VLC G8
VSB G1, G2, G3
VSK J1
VW G8
VWB G9
W W D1, D2, D3, D4, D5
WA D10, D11
WB D25
WBC D9, D10
WCA D13
WCB K12
WCD D15
WDFT K12
WDLB K12
WEC D13
WEZR D11
WF D24
WFC D25
WFF D24
WFOL D24
WFP D21
WHB D19
WHCC D18
WHCV D19
WHL36 D19
WMC D16
WMS D17
WMSC D17
WMTK E31
WOC D14
WR D1, D2, D3, D4
WRM K9
WSGHW D23
WSK J1
WSM K7
WTDK E27
WTDRO12 E27
WTDRO9 E27 WWRS D15
KraftMaid® Cabinetry is proud to have earned the KCMA Certification Seal for all door styles.
KraftMaid cabinetry carries the seal of the Kitchen Cabinet Manufacturers Association (KCMA) Certification Program, which assures that our cabinets meet or exceed the rigorous standards set by the American National Standards Institute (ANSI). Our cabinets are also independently tested to ANSI/KCMA A161.1–2000 and paragraph 611–1.1, “HUD Minimum Property Standards–Housing 4910.1” 9-8-86.
KraftMaid cabinetry demonstrates its commitment to environmental sustainability through meeting or exceeding the requirements as outlined in the Environmental Stewardship Program certification, administered by the KCMA.
All KraftMaid facilities have also obtained ISO 14001 certificate of approval, demonstrating our commitment to reducing the impact of operations on the environment.
KraftMaid® Cabinetry took on 13 tough KCMA tests and passed them all...Beautifully!
• Shelves and bottoms are loaded at 15 pounds per square foot to ensure no excessive deflection or visible sign of joint separation or failure.
• Mounted wall cabinets are loaded to ensure that the cabinet will accept net loading in compliance with ANSI A161.1–2000 requirements.
• A load of up to 250 pounds is applied against the inside of cabinet fronts to ensure reliable front joints.
• A 3 pound steel ball is “drop tested” against shelves, cabinet bottoms and drawer bottoms to ensure cabinets will withstand dropping of cans and other items.
• Cabinets are impact tested by striking the center of a closed and open door with a 10 pound sand bag.
• Cabinet doors are weighted with 65 pounds and operated 10 times to test the ability of the door and hinges to withstand loading.
• Doors are opened and closed for 25,000 cycles to ensure durability under the stress of normal usage.
• Drawers and drawer mechanisms are tested at 15 pounds per square foot and operated through 25,000 opening and closing cycles to assure durability.
• A 3 pound weight is dropped 10 times against drawer assembly to ensure that drawer front assembly will withstand the impact of closing.
• Cabinets are hot box tested at temperatures up to 120˚F to ensure finish will withstand high heat.
• Cabinets are cycle tested at temperatures ranging from -5˚F to + 120˚F to ensure finish will withstand temperature changes.
• A 24–hour soap and water solution test checks finish ability to withstand exposure to detergents and moisture.
• Finish is exposed to vinegar, grape juice, olive oil, lemon juice, 100 proof alcohol and more to ensure no appreciable discoloration, stain or whitening of the finish.
WARNING: KraftMaid cabinetry product contains chemicals known to the State of California to cause cancer.
©2014 Masco Cabinetry LLC. Printed in the USA R 9/14
EN
VIR
ON
ME
N
TA L S T E W A R DS H
I P P
RO
GR
AM
CE
R T I F I E D E S P 05- 12