specifications intended use: electrical · pdf fileled energy and maintenance lighting...
TRANSCRIPT
CERTIFICATIONS/LISTINGS
PRODUCT IMAGE(S)SPECIFICATIONS
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice.© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA 05.03.2018
Cat.#
Approvals
Job Type
Top
5 9/16”
Front
6 1/4”
Side
5 5/16”
4 13
/16”
DIMENSIONS
Intended Use:The FL-1 Floodlight is a high performance LED energy and maintenance lighting solution, designed with optical versatility. Markets include: flags, columns, statues, security, building floodlighting, landscapes. The FL-1 LED Floodlight is intended to be used to reduce energy and maintenance associated with legacy HID lighting technology.
Construction:• The housing and electrical compartment
are made from die cast aluminum that is pretreated and powder-coated to meet the most rugged industry standards.
LED/Optics:• Provides the best combination of vertical and
horizontal illumination. • Features revolutionary individual LED optical
control based on high performance TIR optical designs.
• The precisely-designed optics result in fewer fixtures that use less energy, leading to lower life-cycle costs along with lower up front installation costs.
• Luminaire shall include (as standard equipment) a four position rotary dimming switch. The switch shall be mounted on the PCB and used to manually set dimming level to approximately 25%, 50%, 75% and 100% of current.
• Dimming switch shall be accessible by removing a sealing screw from the lens. Following removal of screw, switch may be rotated with a small screwdriver. A metal insert shall be provided in lens to accept the access screw.
Electrical: • Fixture electrical compartment contains all LED
driver components.• Power factor is ≥.90 at full load.• Dimming drivers are standard, but must
contact factory to request wiring leads for purpose of external dimming controls
• Surge protection - 20kA• Lifeshield™ Circuit - protects luminaire from
excessive temperature by interfacing with the 0-10V dimmable drivers to reduce drive current as necessary.
Finish: • IFS polyester powder-coat electrostatically
applied and thermocured.• IFS finish consists of a five stage pretreatment
regimen with a polymer primer sealer and top coated with a thermoset super TGIC polyester powder coat finish.
• The finish meets the AAMA 2604 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance and resists cracking or loss of adhesion per ASTM D522 and resists surface impacts of up to 160 inch-pounds.
Listings: • The Luminaire shall bear a NRTL label and be
marked suitable for wet locations.• CSA 22.2#250.13-14 for wet locations
Finish: Five year limited warranty. For more infomation, visit: www.hubbelllighting.com/resources/warranty
FL-1 (LED)high powered floodlight
FL
SERIES
FL FL-1
LED ENGINE
12L-25 25 Watts - LED Array
VOLTAGE
UNV 120-277V
CCT/CRI
3K7 3000K, 70 CRI
4K7 4000K, 70 CRI
5K7 5000K, 70 CRI
DISTRIBUTION
2X2 Narrow spot
4X4 Narrow flood
5X5 Medium flood
6X6 Wide flood
5X3 Horizontal flood
3X5 Vertical flood
OPTIONS
VS Visor
COLOR
DB Dark bronze textured
BL Black textured
WH White textured
PS Plat. silver smooth
GYS Light gray smooth
CC Custom color
MOUNTING
YK Yoke mount (std.)
TK Threaded knuckle
PK Post top knuckle
AJ1 Architectural junction box
BX1 Brass junction box
WA1 Wall & ceiling adaptor
GS1 Ground stake
PA1 Cast post-top adaptor
TS1 Tree strap
12NA2 1/2” NPT adaptor (std.)
34NA2 3/4” NPT adaptor
ORDERING INFORMATION ORDERING EXAMPLE: FL/12L-25/3K7/3X5/UNV/YK/VS/DB
1 Not available with PK2 Available when YK option is chosen
Beacon Products • 2041 58th Avenue Circle East Bradenton, FL 34203 • Phone: 800-345-4928 Due to our continued efforts to improve our products, product specifications are subject to change without notice.© 2017 BEACON PRODUCTS, All Rights Reserved • For more information visit our website: www.beaconproducts.com • Printed in USA 05.03.2018
MOUNTING OPTIONS
ACCESSORIES
Wall & Ceiling Adapter
1/2” NPT opening
(3) Ø5/16”holes
6”7 5/16”
2 3/
4”
3 5/
8”
1 9/16”
1/4”
Ground Stake
(3) 1/2” NPT openings(2 side, 1 top)
2 13/16”
9”
20 5
/8”
Architectural Junction Box
Brass (in-grade) Junction Box
3”9/16
”
Tree Strap (TS)
1 3/4”
12’ Tree Strap provided
Cast Post-top Adaptor
(3) 1/2” NPT openings(2 side, 1 top)
Fits Ø2 3/8” to Ø3 1/2” tenons
4 1/
2”
NPT Adapter
1 1/2” NPT thread
2 5/
8”
1 1/
4” h
ex
Yoke Mount (YM)
Ø7/8” hole
5 7/16” 1 1/2”
5 11
/16”
Visor
5 1/
16” 4 1/16”
3 11/16”
5K(5000K nominal, 70 CRI)
4K(4000K nominal, 70 CRI)
3K(3000K nominal, 70 CRI)
# LED’S
DRIVE CURRENT
(MILLIAMPS)SYSTEM WATTS
DISTRIBUTION TYPE
FIELD ANGLEH” X V” LUMENS LPW1
MAX BEAM CANDLEPOWER LUMENS LPW1
MAX BEAM CANDLEPOWER LUMENS LPW1
MAX BEAM CANDLEPOWER
12 700mA 25w
2X2 30" X 30" 2,776 111 27044 2,804 112 27318 2,524 101 245864X4 55" X 55" 2,659 106 7623 2,686 107 7701 2,418 97 69315X5 90" X 90" 2,482 99 2359 2,507 100 2383 2,256 90 21455X3 73" X 43" 2,396 96 5530 2,420 97 5586 2,178 87 50273X5 43" X 73" 2,396 96 5530 2,420 97 5586 2,178 87 50276X6 103" X 103" 2,504 100 2175 2,566 103 2197 2,309 92 1977
PERFORMANCE DATA
1Lumen values are from photometric tests performed in accordance with IESNA LM-79-08. Data is considered to be representative of the configurations shown. Actual performance may differ as a result of end-user environment and application.