specifiers guide chapter 9: networking - wall-mount cabinets
TRANSCRIPT
894
Networking:Wall-MountCabinets
Wall-MountCabinetsProductSelectionGuide
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Wall-Mount CabinetsWall-Mount Cabinets Product Selection Guide
Wall-MountCabinetsProductSelectionGuide
1Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • hoffmanonline.com © 2009 Hoffman Enclosures Inc.
Networking: Wall-Mount Cabinets
Wall-Mount Cabinets Product Selection Guide
Spec-00449 C
Wall-Mount Cabinets Product Selection Guide
Wall-Mount FaMily ACCESSPLUS® II PROTEK® PROTEK® DOUBLE-HINGED
Description ACCESSPLUS® II Double-Hinged Wall-Mount provides both security and acces-sibility. Designed to hold multiple pieces of voice data equipment. Perfect where space is at a premium.
• Double–hinged wall mount
PROTEK® Wall-Mount Cabinets are ideal for protecting network equipment beyond typical Type 1 enclosures.
• Harsh environments• Models with A/C units
Offers the flexibility and accessibility of a double-hinged wall-mount and the envi-ronmental protection of the PROTEK Type 4/12 ratings.
• Double-hinged wall-mount • Harsh environments • Models with A/C units
Construction Mild steel Mild steel Mild steel
Application Rating Indoors with built-in ventilation areas Indoors and outdoors. Protects from dust, dirt and splashing water.
Protects from dust, dirt and splashing water.
DiMensionsRack Units (RU) Range 12–39 RUs 12–26 RUs 7–26 RUs
Height 25.00–72.00 in. 24.00–48.00 in. 16.00–48.00 in.
Width 24.00 in., 28.00 in. 24.00 in. 24.00 in.
Depth 18.00–25.00 in. 12.00–24.00 in. 15.00–25.00 in.
RatingsLoading - Static 250–500 lbs. 100–200 lbs. 100–175 lbs.
Certifications and Listings UL 508A, CSA, NEMA, IEC UL 508A, CSA, NEMA, IEC UL 508A, CSA, NEMA, IEC
Type / NEMA / IP Rating Type 1, IP40 Type 1, 4, 12, IP55/IP66 Type 1, 4, 12, IP55/IP66
Plenum Rated Yes Yes Yes
stRuctuReFront Door Window or solid Window or solid Window or solid
Back Keyhole mounting slots, accessory raised pads, cable tie-down points, large cable knock-out
Rear mounting studs, panel-ready and wall-mounting provisions
Rear mounting studs, panel-ready and wall-mounting provisions
Top / Bottom Gland Plate/Cable knock-outs, fan-ready Solid sheet steel construction Solid sheet steel construction
Sides Cable knock-outs, fan-ready Solid sheet steel construction Solid sheet steel construction
Rack Angles 1 set tapped 10-32 fully adjustable, plated 1 set tapped 10-32 fully adjustable, plated 1 set tapped 10-32 fully adjustable, plated
applicationsMost frequently utilized model for mount-ing network equipment. Gland-plate offer-ing great for retrofit applications.
Ideal for remote areas with harsh environ-ments for network equipment. Extra-deep to accommodate rack equipment.
Ideal for remote areas with harsh environ-ments for network equipment. Extra-deep to accommodate rack equipment.
Unique Features • Single person mounting• Latch-free sides permit flush-mounting to
adjacent equipment, enclosures and walls• Safety glass window units• Pole mounting kit available• Reversible hinges (left/right)• Grounding and bonding provisions
• Available with T4 A/C units • Extra-deep sizes • Fully vented with foam-in-place gasket • Safety Glass • Rack angle standard • Grounding and bonding provisions
• Available with T4 A/C units • Extra deep sizes • Fully vented with foam-in-place gasket • Safety Glass • Rack Angle Standard • Front and Rear Access • Grounding and bonding provisions
Spec-00449.indd 1 10/07/09 9:48:09 AM
895
Networking:Wall-MountCabinets
Wall-MountCabinetsProductSelectionGuide
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts2 Subject to change without notice PH 763 422 2211 • FX 763 422 2600 • hoffmanonline.com © 2009 Hoffman Enclosures Inc.
Networking: Wall-Mount Cabinets
Wall-Mount Cabinets Product Selection Guide
Spec-00449 C
L-BOX® D-BOX™ WIFI ENCLOSURE—2 MODELS COMLINE®
L-BOX® provides convenient mounting and storage for patch panels in a space-saving design.
• Horizontal cable distribution• Copper to fiber• Consolidation points• Vertical rack angles
D-BOX™ provides convenient mounting and storage for patch panels.
• Horizontal cable distribution• Copper to fiber• Consolidation points• Fixed and rotating rack angles
Provides a secure enclosure for WiFi and other network equipment. Fiberglass does not impede WiFi/WLAN signals.
• Corrosion resistant • Plenum rated • Plywood back panel provided
Lightweight, corrosion-resistant aluminum enclosure provides long-lasting protection for electrical and network components for both indoor and outdoor environments.
• Corrosion-resistant• Outdoor applications (OSP)
Mild steel Mild steel Fiberglass Aluminum
Indoors with built-in ventilation areas. Indoors with built-in ventilation areas. Indoors and outdoors plus hazardous areas. Protects from dust, dirt and splash-ing water.
Indoors and outdoors plus hazardous areas. Protects from dust, dirt and splash-ing water.
6–12 RUs 4–6 RUs Not applicable for smaller model.Optional RU for large model.
Not supplied as standard.Optional 12–26 RUs
24.00–48.00 in. 24.00–48.00 in. 6.00–24.61 in. 11.80–59.10 in.
24.00 in. 24.00 in. 6.00–24.11 in. 11.80–35.40 in.
12.34 in. 8.34–12.34 in. 4.00–12.64 in. 5.90–11.80 in.
75 lbs. 100 lbs. 50–200 lbs. 50–200 lbs.
UL 1863/508A/60905, CSA NEMA, IEC, EIA 310-D
UL 1863/508A/60905, CSA, NEMA, IEC, EIA 310-D
UL 508A, CSA,NEMA, IEC UL 508A, CSA, NEMA, IEC
Type 1, IP40 Type 1, IP40 Type 4, 4X, 12, 13 IP66 Type 3, 3R, 4, 4X, 12, IP66
Yes Yes Yes—Solid door only Not applicable
Vented wrap-around door Solid with vents Solid or window Solid
Keyhole mounting slots, accessory raised pads, cable tie-down points, large cable knock-out
Keyhole mounting slots, accessory raised pads, cable tie-down points, large cable knock-out
Wood panel standard Rear mounting studs, panel-ready and wall-mounting provisions
Cable knock-outs, fan-ready Cable knock-outs, fan-ready Solid fiberglass construction Solid aluminum construction
Cable knock-outs, fan-ready Cable knock-outs, fan-ready Solid fiberglass construction Solid aluminum construction
1 set tapped 10-32, plated • 1 set fixed tapped 10-32, plated • 1 set tapped 10-32, fully adjustable
Optional on largest size • Optional based on size• 1 set tapped 10-32, fully adjustable
Vertical equipment mounting provides horizontal cable distribution. Offers a lower-profile installation.
Fixed and rotating rack angles for easy equipment mounting. Offers a lower-profile installation.
Indoors and outdoors: Great for tunnels, marinas, outside walls and rooftops. Ideal for wireless applications; signals pass unimpeded through fiberglass.
Indoors and outdoors: Great for roof-top, pole mount and tower mounting. Lightweight with corrosion resistance.
• Removable door• Quarter-turn latches with keyed lock• Cable tie-down points• Mounting screws provided• Top and bottom knockouts• Cable spool mounting• Complete accessories—fans, shelves and others• Grounding and bonding provisions
• Removable and reversible door• Quarter-turn latches with keyed lock• Cable tie-down points• Mounting screws provided• Grounding and bonding provisions• Top and bottom knockouts• Cable spool mounting• Complete accessories—fans, shelves and others
• Fiberglass is easily punched or drilled• Foam-in-place gasketing• Removable door with stainless steel hinge pins• Window models are scratch-resistant GE Lexan Margard• Small model—screw cover• Large model—key lock knob
• Solar shield provides cooler interior for outdoor applications
• Foam-in-place gasketing• Latching—one- and three-point options• Door stop• Door options—removable and heavy-
duty continuous• Grounding and bonding provisions
Spec-00449.indd 2 10/07/09 9:48:11 AM
896
Networking:Wall-MountCabinets
ACCESSPLUS®IIDouble-Hinge
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
ACCESSPLUS® II Double-Hinge
ACCESSPLUS®IIDouble-Hinge,Type1
IndustryStandards
UL508A;Type1;FileNo.E61997cULListedperCSAC22.2No.182.4;FileNo.E230874
EIA310-DNEMA/EEMACType1EIC60529IP20PerBICSITDMMTenthedition,Chapter7,TelecommunicationEnclosures(TE)
ApplicationACCESSPLUS®IICabinetsprovidesecurity,equipmentaccess,coolingandsupportfornetworkandother19-in.rack-mountequipment.Thecabinethasthreecomponents:frontdoor,centersectionandwallsection.
Features• Double-hingedforeasyequipmentaccess;centersectionprovides
19-in.rackmountingperEIAuniversalspacingandisaccessedthroughthefrontdoororswingthecentersectionawayfromthewallsectionforrearaccess
• Roundcorners;nosharpedges• Frontdoorhaseitherasolidsteelorhardened,tintedsafety-glass
windowdoorforsuperiorscratchresistance• Centersectioneasilyremovedfromrearsection;tool-lessone-
personinstallationpossible• Self-grounding,platedsteelrackanglesfullyadjustablewithin
centersection• Wallsectionprovidescableentryandcablemanagementwith
knockoutsorglandplates• Glandplatemodelprovideseasyretrofitandfastinstallationand
allowsforpre-terminatedcablesorpre-wiredpatchpanels;noneedtore-terminateandtest
• Self-lockingcenter-to-wallsectionlatchesintwolocations• Frontaccesstoalllatches(noexposedsidelatches);cabinetcanbe
installedtightlyincorners• Ventedsidesprovidecrossflowventilationtoimproveheat
dissipation• Verticalcablemanagerincludedin28-in.-widemodels• Afulllineofaccessoriesisavailable
SpecificationsFrontDoor(windoworsolidsteel)• Compositeframe(injectionmoldedtopandbottomwithextruded
compositesides)• 140-degreeopeningdoor• Field-reversible(leftorright)hinge• Quarter-turnkeylock,twokeysincluded• Windowdoorisscratch-resistant1/4-in.tintedsafetyglass• Soliddoorhas16gaugesteelinsertwithmatchingblackfinish
CenterSection• Welded14gaugesteel• Solidtopofcentersectionsprovidesprotectionagainstfalling
debris• Ventilatedsides(towhichfanscanbeadded)• Self-latchingclosureconnectscentersectiontowallsection• Self-alignmentrampsupportscentersectiontowallsection• Heavydutycenter-to-rearsectionhingewithquick-releaseself-
retainedhingepineaseswallinstallationRack-MountingAngles• 12gauge,platedsteel• EIAuniversalspaced19-in.rack-mountingholes• RUmarkedfrombottomtotop• Tapped10-32holes,20mountingscrewsincluded
RearWallSection• Welded14gaugesteel• Radiuscorners;nosharpedges• Availablewithknockoutsorglandplates• Raisedpadsforaccessorymounting• Cabletie-downpointsforcablemanagement• Keyholemountingholesallowwallsectiontobemountedover
fastenersandeasesinstallation• Threecable-entrygrommets
FinishPretreatedsteelcoatedwithRAL9005blacklight-textured,low-glosspolyesterpowderpaint.Otherfinishesavailable—contactHoffmanCustomerService.Bulletin:DWDH1
897
Networking:Wall-MountCabinets
ACCESSPLUS®IIDouble-Hinge
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct WindowDoorCatalogNumber AxBxCin. AxBxCmm RackUnits AdditionalRackAngles(S=SquareHole)(T=TappedHole)EWMW242418 23.60 x 23.62 x 18.20 600 x 600 x 462 12 EWMR24T or EWMR24SEWMW362418 36.02 x 23.62 x 18.20 915 x 600 x 462 19 EWMR36T or EWMR36SEWMW482418 48.03 x 23.62 x 18.20 1220 x 600 x 462 26 EWMR48T or EWMR48SEWMW602418 60.04 x 23.62 x 18.20 1525 x 600 x 462 32 EWMR60T or EWMR60SEWMW722418 72.05 x 23.62 x 18.20 1830 x 600 x 462 39 EWMR72T or EWMR72SEWMW242425 23.62 x 23.62 x 25.09 600 x 600 x 637 12 EWMR24T or EWMR24SEWMW362425 36.02 x 23.62 x 25.09 915 x 600 x 637 19 EWMR36T or EWMR36SEWMW482425 48.03 x 23.62 x 25.09 1220 x 600 x 637 26 EWMR48T or EWMR48SEWMW602425 60.04 x 23.62 x 25.09 1525 x 600 x 637 32 EWMR60T or EWMR60SEWMW722425 72.05 x 23.62 x 25.09 1830 x 600 x 637 39 EWMR72T or EWMR72SEWMW242430 23.62 x 23.62 x 30.01 600 x 600 x 762 12 EWMR24T or EWMR24SEWMW362430 36.02 x 23.62 x 30.01 915 x 600 x 762 19 EWMR36T or EWMR36SEWMW482430 48.03 x 23.62 x 30.01 1220 x 600 x 762 26 EWMR48T or EWMR48S
B dimension does not include wall-to-center section hinge.
898
Networking:Wall-MountCabinets
ACCESSPLUS®IIDouble-Hinge
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct SolidDoorCatalogNumber AxBxCin. AxBxCmm RackUnits AdditionalRackAngles(S=SquareHole)(T=TappedHole)EWMS242418 23.62 x 23.62 x 18.20 600 x 600 x 462 12 EWMR24T or EWMR24SEWMS362418 36.02 x 23.62 x 18.20 915 x 600 x 462 19 EWMR36T or EWMR36SEWMS482418 48.03 x 23.62 x 18.20 1220 x 600 x 462 26 EWMR48T or EWMR48SEWMS242425 23.62 x 23.62 x 25.09 600 x 600 x 637 12 EWMR24T or EWMR24SEWMS362425 36.02 x 23.62 x 25.09 915 x 600 x 637 19 EWMR36T or EWMR36SEWMS482425 48.03 x 23.62 x 25.09 1220 x 600 x 637 26 EWMR48T or EWMR48S
B dimension does not include wall-to-center section hinge.
StandardProduct WindowDoorwithCableManagerCatalogNumber AxBxCin. AxBxCmm RackUnits AdditionalRackAngles(S=SquareHole)(T=TappedHole) VerticalCableMgr.CatalogNumbera
EWMW242825 23.62 x 27.56 x 25.09 600 x 700 x 637 12 EWMR24T or EWMR24S EWMC24EWMW362825 36.02 x 27.56 x 25.09 915 x 700 x 637 19 EWMR36T or EWMR36S EWMC36EWMW482825 48.03 x 27.56 x 25.09 1220 x 700 x 637 26 EWMR48T or EWMR48S EWMC48
B dimension does not include wall-to-center section hinge.a For additional rack angles, also order vertical cable manager.
899
Networking:Wall-MountCabinets
ACCESSPLUS®IIDouble-Hinge
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct WindowDoorwithGlandPlateCatalogNumber AxBxCin. AxBxCmm RackUnits AdditionalRackAngles(S=SquareHole)(T=TappedHole)EWMWG242418 23.62 x 23.62 x 18.20 600 x 600 x 462 12 EWMR24T or EWMR24SEWMWG362418 36.02 x 23.62 x 18.20 915 x 600 x 462 19 EWMR36T or EWMR36SEWMWG482418 48.03 x 23.62 x 18.20 1220 x 600 x 462 26 EWMR48T or EWMR48SEWMWG242425 23.62 x 23.62 x 25.09 600 x 600 x 637 12 EWMR24T or EWMR24SEWMWG362425 36.02 x 23.62 x 25.09 915 x 600 x 637 19 EWMR36T or EWMR36SEWMWG482425 48.03 x 23.62 x 25.09 1220 x 600 x 637 26 EWMR48T or EWMR48S
B dimension does not include wall-to-center section hinge.
LoadRating Height LoadCapacity24 in. 250 lb.36 in. 300 lb.48 in. 350 lb.60 in. 400 lb.72 in. 500 lb.
900
Networking:Wall-MountCabinets
ACCESSPLUS®IIDouble-Hinge
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
VerticalCableManagersfor28-in.-WideCabinet
UseACCESSPLUSCableManagerswhenorderingadditionalrackanglesfor28-in.-widecabinet.Bulletin:DWDH1
CatalogNumber Description FitsCabinetEWMC24 ACCESSPLUS Vertical Cable Manager 24.00 in. A = 24.00; B = 28.00EWMC36 ACCESSPLUS Vertical Cable Manager 36.00 in. A = 36.00; B = 28.00EWMC48 ACCESSPLUS Vertical Cable Manager 48.00 in. A = 48.00; B = 28.00
VerticalCableManagerCapacity Numberofcablesat60percentfilled
CrossSection(Area) 5e(0.22in.dia.) 6(0.28in.dia.) 6A(0.35in.dia.)24.5 in.2 380 300 208
RackAngles Bulletin:DWDH1
CatalogNumber Description RackUnits FitsCabinetEWMR24T Fits 24-in. tapped 12 A = 24.00EWMR36T Fits 36-in. tapped 19 A = 36.00EWMR48T Fits 48-in. tapped 26 A = 48.00EWMR60T Fits 60-in. tapped 32 A = 60.00EWMR72T Fits 72-in. tapped 39 A = 72.00EWMR24S Fits 24-in. square 12 A = 24.00EWMR36S Fits 36-in. square 19 A = 36.00EWMR48S Fits 48-in. square 26 A = 48.00EWMR60S Fits 60-in. square 32 A = 60.00EWMR72S Fits 72-in. square 39 A = 72.00
FanKits Bulletin:DWDH1
CatalogNumber Description FitsCabinetEWMF1 4-in. fan with plug and blocking plates,
115 VAC, 100 CFM smallFits all C = 18.00
EWMF2 4-in. fan with plug and blocking plates,115 VAC, 100 CFM, large
Fits all C = 25.00 or 30.00
901
Networking:Wall-MountCabinets
ACCESSPLUS®IIDouble-Hinge
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
DataComWall-MountCabinetwithGlandPlateApplication
1
Networking: Wall-Mount Cabinets
ACCESSPLUS® II Double-Hinged
Spec-00554 D
Subject to change without notice PH 763 422 2661 • FX 763 422 2588 • hoffmanonline.com © 2010 Hoffman Enclosures Inc.
DataCom Wall-Mount Cabinet with Gland Plate Application
This cabinet offers significant advantages in retrofit applications. The gland plate is mounted at the top and the bottom to accommodate cable runs from above, below or both. The gland plate casing can be removed while patch panels and associated wiring are brought to the cabinet.
2. Install the cable gland plate onto the wall section.
4. Install the center section, then mount patch panels on rack angles.
5. Close and lock the door.
1. Once the wall section is installed on the wall, lay in the patch panel.
3. Use wire ties or cable wraps to secure the cable to the cabinet.
Spec-00554.indd 1 10/18/2010 1:19:45 PM
902
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK® Wall-Mount and Double-Hinge Cabinets
PROTEK®,Single-DoorULandNEMAType4or12
IndustryStandards
UL508AListed;Type4or12;FileNumberE619967cULListedperCSAC22.2No.94;Type4or12;FileNumberE61997
NEMA/EEMACType4or12IEC60529,IP66orIP55
ApplicationPROTEK®Cabinetsareanexcellent,off-the-shelfchoiceformounting19-in.racknetworkequipmentinwetordirtyenvironmentswherefloorspaceisatapremium.Solidorsafetyglasswindowdoormodelsprovideapplicationflexibility.
Features• Soliddoorprovidescompletephysicalandvisualprotection• Windowdoor,madewithscratch-resistantsafetyglass,provides
equipmentmonitoringwithoutopeningthedoortominimizecontamination
• Fullyweldedandgroundbodyanddoorconstructionforlong-termgoodappearanceanddurability
• Foam-in-placeseamlessgasketarounddoorsealsagainstoutdoorairinfiltration;isnon-absorbingandchemicalresistant
• Type12cabinetshavesolidorwindowdoorsandalockingwingknobwithtwokeys.Theyprovidesecurityandconvenienceinindoorapplications.
• Type4cabinetshavesoliddoorsandapadlock-capablequarter-turnlatch.Theyprovideeasyoperationandlockingoptionsinindoorandoutdoorapplications.
• Onesetofadjustable,tappedrackanglesincluded• Optionalsquare-hole(.375in.)rackanglesavailableforequipment
mountingflexibility• Rackanglesareplatedandself-groundingfordurabilityandsafety• Collarstudsprovidedonbackofcabinetformountingaccessory
panels• Accessorypanelsformountingadditionalaccessoriesattheback
ofthecabinetincludetie-downpointsandpre-drilledholes• Plenumratedforuseinairexchangeareas
Specifications• Doorsandbodymadeof14gaugesteel• Convenientstudsprovidedonbothdoorandbodyforbonding
andgrounding• Rackanglestapped10-32perEIAstandards;madeof12gauge
self-groundingplatedsteel• Windowisclear,.25-in.thick,scratch-andimpact-resistantsafety
glass• Optionalpolycarbonatewindow(notplenumrated)canbefield-
orfactory-installed.ContactHoffmanCustomerServiceforfactoryinstallation.
• Twenty10-32screwsincluded
FinishPretreatedsteelcoatedwithRAL7035light-grayorRAL9005blacktextured,low-glosspolyesterpowderpaint.Otherfinishesavailable—contactHoffmanCustomerService.Bulletin:DWS12
StandardProduct WindowDoor,NEMA12,IP55
CatalogNumber AxBxCin./mm FinishRackUnits
StandardPanel
AccessoryPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDW242412B 24.00 x 24.00 x 12.00 610 x 610 x 305
Black 12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDW242412G 24.00 x 24.00 x 12.00 610 x 610 x 305
Gray 12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDW362412B 36.50 x 24.00 x 12.00 927 x 610 x 305
Black 19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDW362412G 36.50 x 24.00 x 12.00 927 x 610 x 305
Gray 19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDW482412B 48.50 x 24.00 x 12.00 1232 x 610 x 305
Black 26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDW482412G 48.50 x 24.00 x 12.00 1232 x 610 x 305
Gray 26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDW242424B 24.00 x 24.00 x 24.00 610 x 610 x 610
Black 12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDW242424G 24.00 x 24.00 x 24.00 610 x 610 x 610
Gray 12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDW362424B 36.50 x 24.00 x 24.00 927 x 610 x 610
Black 19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDW362424G 36.50 x 24.00 x 24.00 927 x 610 x 610
Gray 19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDW482424B 48.50 x 24.00 x 24.00 1232 x 610 x 610
Black 26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDW482424G 48.50 x 24.00 x 24.00 1232 x 610 x 610
Gray 26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
903
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct SolidDoor,NEMA4,IP66
CatalogNumber AxBxCin./mm FinishRackUnits
StandardPanel
AccessoryPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDS242412G4 24.00 x 24.00 x 12.00 610 x 610 x 305
Gray 12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDS362412G4 36.50 x 24.00 x 12.00 927 x 610 x 305
Gray 19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDS482412G4 48.50 x 24.00 x 12.00 1232 x 610 x 305
Gray 26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDS242424G4 24.00 x 24.00 x 24.00 610 x 610 x 610
Gray 12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDS362424G4 36.50 x 24.00 x 24.00 927 x 610 x 610
Gray 19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDS482424G4 48.50 x 24.00 x 24.00 1232 x 610 x 610
Gray 26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
StandardProduct SolidDoor,NEMA12,IP55
CatalogNumber AxBxCin./mmRackUnits
StandardPanel
AccessoryPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDS242412B 24.00 x 24.00 x 12.00 610 x 610 x 305
12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDS242412G 24.00 x 24.00 x 12.00 610 x 610 x 305
12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDS362412B 36.50 x 24.00 x 12.00 92700 x 610 x 305
19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDS362412G 36.50 x 24.00 x 12.00 927 x 610 x 305
19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDS482412B 48.50 x 24.00 x 12.00 1232 x 610 x 305
26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDS482412G 48.50 x 24.00 x 12.00 1232 x 610 x 305
26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDS242424B 24.00 x 24.00 x 24.00 610 x 610 x 610
12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDS242424G 24.00 x 24.00 x 24.00 610 x 610 x 610
12 CP2424 PTP2424A PTRA1924TPL PTRA1924THL
PTDS362424B 36.50 x 24.00 x 24.00 927 x 610 x 610
19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDS362424G 36.50 x 24.00 x 24.00 927 x 610 x 610
19 CP3624 PTP3624A PTRA1936TPL PTRA1936THL
PTDS482424B 48.50 x 24.00 x 24.00 1232 x 610 x 610
26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
PTDS482424G 48.50 x 24.00 x 24.00 1232 x 610 x 610
26 CP4824 PTP4824A PTRA1948TPL PTRA1948THL
904
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK®Single-DoorFanandFilterThermalPackages,ULandNEMAType1
IndustryStandards
UL508AListed;Type1;FileNumberE619967cULListedperCSAC22.2No.94;Type1;FileNumberE61997
NEMA/EEMAC:Type1IEC60529,IP30
ApplicationPROTEK®FanandFilterPackagesareidealforprotectingsensitive19-in.rackequipmentfromharmfulenvironmentalcontaminantssuchasfallingdirt,dustanddrippingwater.Usewheretheambientaircanbeusedtocooltheinternalequipmentandwhereprotectionfromfallingdirtanddrippingwaterisneeded.Filtersassistinremovingcontaminantsandareeasilyremovedforperiodiccleaningwithoutaccessingthecabinet.Top-mountedfansprovideincreasedairflowandmaximizeheatdissipationofinternallymountedequipment.Bothtop-mountedfansandbottom-mountedintakefiltersarepositionedawayfrom19-in.rack-mountingareas.
Features• Soliddoorprovidescompletephysicalandvisualprotection• Windowdoor,madewithscratch-resistantsafetyglass,provides
equipmentmonitoringwithoutopeningthedoortominimizecontamination
• Fullyweldedandgroundbodyanddoorconstructionforlong-termgoodappearanceanddurability
• Foam-in-placeseamlessgasketarounddoorsealsagainstoutdoorairinfiltration;isnon-absorbingandchemicallyresistant
• Type12cabinetshavewindowdoorsandalockingwingknobwithtwokeys.Theyprovidesecurityandconvenienceinindoorapplications.
• Type4cabinetshavesoliddoorsandapadlock-capable,tamper-resistant,quarter-turnlatch(toolincluded).Theyprovideeasyoperationandlockingoptionsinindoorandoutdoorapplications.
• Onesetofadjustabletappedrackanglesincluded• Optionalsquare-hole(.375-in.)rackanglesavailableforequipment
mountingflexibility• Rackanglesareplatedandself-groundingfordurabilityandsafety• Collarstudsprovidedonbackofcabinetformountingaccessory
panels• Accessorypanelsformountingadditionalaccessoriesattheback
ofthecabinetincludetie-downpointsandpre-drilledholes• Plenumratedforuseinairexchangeareas
Specifications• Doorsmadeof16gaugesteel;bodymadeof14gaugesteel• Convenientstudsprovidedonbothdoorandbodyforbonding
andgrounding• Rackanglestapped10-32perEIAstandards;madeof12gauge
self-groundingplatedsteel• Windowisclear,.25-in.thick,scratch-andimpact-resistantsafety
glass• Optionalpolycarbonatewindow(notplenumrated)canbefield-
orfactory-installed.ContactHoffmanCustomerServiceforfactoryinstallation.
• Twenty10-32screwsincluded• Pagodatop-mounted6-in.fanandbottom-mounted10-in.filter
inlet• Topshroudprotectscabinetandfanfromfallingdebrisand
drippingwater• Bottom-mountedairinletwithoutsideremovableandcleanable
filter• Regularfiltercleaningrequiredforoptimumthermalperformance• Operateson110/115VAC50/60Hzlinevoltage• StandardNEMA15Apluginternaltothecabinet(5-15P)
FinishPretreatedsteelcoatedwithRAL7035lightgraytextured,low-glosspolyesterpowderpaint.Otherpaintfinishesavailable—contactHoffmanCustomerServicefordetails.
LoadRatingWARNING:Thecabinetmustbesafelyandcorrectlymountedtothewalltosupportthetotalweightofthecabinetanditscontents.Duetovariousapplicationsandwallconstructions,consultationwithastructuralengineerandanalysisofthemountingwallisadvised.Bulletin:DWS12
StandardProduct PROTEKSingleWindowDoorULType1FanandFilterPackages
CatalogNumber AxBxCin. AxBxCmmRackUnits
AccessoryPanels
StandardPanels
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDW242424GF 24.00 x 24.00 x 24.00 610 x 610 x 610 12 PTP2424A CP2424 PTRA1924TPL PTRA1924THLPTDW362424GF 36.50 x 24.00 x 24.00 927 x 610 x 610 19 PTP3624A CP3624 PTRA1936TPL PTRA1936THLPTDW482424GF 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 PTP4824A CP4824 PTRA1948TPL PTRA1948THL
TechnicalOperatingInformationFanUnit(6-in.FanwithCord) ReplacementFilterNo.AFLTR10Hz VoltageVAC CFM W@50/60Hz FullLoadAmp@50/60Hz NoiseSIL(db)50/60 115 200/240 36/32 .45/.36 50/56
905
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
ThermalPerformanceforFanandFilterPackagesPROTEKFanandFilterPackagescalculatedthermalperformanceMax.InternalTemperature:100FVoltage/Hertz:115VAC/60HzFilters:Clean(Regularcleaningrequiredtomaintainairflow)AirVolume:200CFM(ExactCFMdependantonVoltage,Frequency,andfilterefficiency)Max.Elevation:6,000ft.(ContactHoffmanforelevationsabove6,000ft.)
ThermalPerformance PROTEK®FanandFilterPackagesAmbientTemperature(°F) Watts(Heat)Dissipated100 or above Not recommended
Consider PROTEK Air Conditioner Package95 31690 63285 94880 126475 158070 189665 221260 252855 2844
Watts = .316 x CFM x delta T (degrees F) (at sea level)
Delta T = Max internal temperature (degrees F) – Ambient external temperature (degrees F)
Ambient temperature is the air temperature in and around the intake opening of the cabinet. Fan cooling can never cool the equipment below ambient temperature.
906
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK®Single-DoorThermalACPackage,ULandNEMAType4or12
IndustryStandardsPROTEKAirConditionerPackagesIndoor(Type12)UL508AListed;Type12;FileNumberE619967cULListedperCSAC22.2No.94;Type12;FileNumberE61997
NEMA/EEMAC:Type12IEC60529,IP55PROTEKAirConditionerPackagesOutdoor(Type4)UL508AListed;Type12,4;FileNumberE619967cULListedperCSAC22.2No.94;Type12,4;FileNumberE61997
NEMA/EEMAC:Type12,4IEC60529,IP66
ApplicationThePROTEK®ThermalPackageisanexcellent,off-the-shelfchoiceformounting19-in.racknetworkequipmentinwetordirtyenvironmentswherefiltrationorairconditioningisrequiredandfloorspaceisatapremium.CompleteFanandFilterandAirConditionerPackagesareavailabletomatchapplicationrequirements.
Features• Soliddoorprovidescompletephysicalandvisualprotection• Windowdoor,madewithscratch-resistantsafetyglass,provides
equipmentmonitoringwithoutopeningthedoortominimizecontamination
• Fullyweldedandgroundbodyanddoorconstructionforlong-termgoodappearanceanddurability
• Foam-in-placeseamlessgasketarounddoorsealsagainstoutdoorairinfiltration;isnon-absorbingandchemicallyresistant
• Type12cabinetshavewindowdoorsandalockingwingknobwithtwokeys.Theyprovidesecurityandconvenienceinindoorapplications.
• Type4cabinetshavesoliddoorsandapadlock-capable,tamper-resistant,quarter-turnlatch(toolincluded).Theyprovideeasyoperationandlockingoptionsinindoorandoutdoorapplications.
• Onesetofadjustabletappedrackanglesincluded• Optionalsquare-hole(.375-in.)rackanglesavailableforequipment
mountingflexibility• Rackanglesareplatedandself-groundingfordurabilityandsafety• Collarstudsprovidedonbackofcabinetformountingaccessory
panels• Accessorypanelsformountingadditionalaccessoriesattheback
ofthecabinetincludetie-downpointsandpre-drilledholes• Plenumratedforuseinairexchangeareas• Cabinetshippedwithairconditioneruninstalled
Specifications• Doorsmadeof16gaugesteel;bodymadeof14gaugesteel• Convenientstudsprovidedonbothdoorandbodyforbonding
andgrounding• Rackanglestapped10-32perEIAstandards;madeof12gauge
self-groundingplatedsteel• Windowisclear,.25-in.thick,scratch-andimpact-resistantsafety
glass• Optionalpolycarbonatewindow(notplenumrated)canbefield-
orfactory-installed.ContactHoffmanCustomerServiceforfactoryinstallation.
• Twenty10-32screwsincluded• Right-side-mountedT4LineIndoor/OutdoorAirConditioner• Operateson110/115VAC50/60Hzlinevoltage• StandardNEMA15Apluginternaltothecabinet(5-15P)• Seetablefortechnicaloperatinginformation• Routinemaintenancerequiredforoptimumperformance(see
servicemanual)
FinishPretreatedsteelcoatedwithRAL7035lightgraytextured,low-glosspolyesterpowderpaint.Otherpaintfinishesavailable—contactHoffmanCustomerServicefordetails.
LoadRatingWARNING:Thecabinetmustbesafelyandcorrectlymountedtothewalltosupportthetotalweightofthecabinetanditscontents.Duetovariousapplicationsandwallconstructions,consultationwithastructuralengineerandanalysisofthemountingwallisadvised.Bulletin:DWS12
StandardProduct SingleWindow-DoorULType12AirConditionerPackages
CatalogNumber AxBxCin. AxBxCmmRackUnits
AccessoryPanels
StandardPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDW242424GA 24.00 x 24.00 x 24.00 610 x 610 x 610 12 PTP2424A CP2424 PTRA1924TPL PTRA1924THLPTDW362424GA 36.50 x 24.00 x 24.00 927 x 610 x 610 19 PTP3624A CP3624 PTRA1936TPL PTRA1936THLPTDW482424GA 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 PTP4824A CP4824 PTRA1948TPL PTRA1948THL
StandardProduct SingleSolid-DoorULType4AirConditionerPackages
CatalogNumber AxBxCin. AxBxCmmRackUnits
AccessoryPanels
StandardPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDS242424GA4 24.00 x 24.00 x 24.00 610 x 610 x 610 12 PTP2424A CP2424 PTRA1924TPL PTRA1924THLPTDS362424GA4 36.50 x 24.00 x 24.00 927 x 610 x 610 19 PTP3624A CP3624 PTRA1936TPL PTRA1936THLPTDS482424GA4 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 PTP4824A CP4824 PTRA1948TPL PTRA1948THL
TechnicalOperatingInformationACUnit(T150116G100) ReplacementFilterNo.10100091Hz VoltageVAC Phase BTU/[email protected].(E) FullLoadAmp Max.Amb.Temp.(ºF) Max.Amb.Temp.(ºC) CordandPlug60 (50) 110 - 115 1 800 (235 watts) 3.6 (3.8) 131 (125) 52 (52) 24-in. cord length 5-15PPlug
907
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
ThermalPerformanceforAirConditionerPackagesPROTEKAirConditionercalculatedthermalperformanceACPerformance:800BTU/houror235wattsVoltage/Hertz:115VAC/60HzMax.AmbientTemperature:131FMin.AmbientTemperature:-40FMax.InternalTemperature:100F(Allowable)
ThermalPerformance PROTEK®AirConditionerPackagesAmbientTemperature(°F)
Watts(Heat)DissipatedCabinetHeight:24in.
Watts(Heat)DissipatedCabinetHeight:36in.
Watts(Heat)DissipatedCabinetHeight:48in.
130 15 N/A N/A120 88 73 59110 161 154 146100 234 234 23490 308 315 32280 381 396 41070 454 476 49860 527 557 58650 601 637 67440 674 718 762
N/A = Not applicable and not recommended in these applications
1 BTU = 3.413 watts
908
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK®DHDouble-Hinge,ULandNEMAType4or12
Self-Closing Latch Type 4 Enclosures
IndustryStandards
UL508AListed;Type4or12;FileNumberE619967cULListedperCSAC22.2No.94;Type4or12;FileNumberE61997
NEMA/EEMAC:Type4or12IEC60529,IP66orIP55
ApplicationPROTEK®DHCabinetsprotectequipmentinwetordirtyenvironmentsandcanbepole-orwall-mounted.Availablewithreversibleleftorrighthinging,thecabinetswingsopentoprovideeasyequipmentserviceandinstallationaccess.
Features• Type12cabinetsavailablewithsolidorwindowdoorsandhave
alockingwingknobwithtwokeys.Theyprovidesecurityandconvenienceinindoorapplications.
• Type4cabinetshavesoliddoorsandapadlock-capablequarter-turnlatch.Theyprovideeasyoperationandlockingoptionsinindoorandoutdoorapplications.
• Soliddoorprovidescompletephysicalandvisualprotection• Windowdoor,madewithscratchresistantsafetyglass,allows
equipmentmonitoringwithoutopeningthedoortominimizecontamination
• Double-hingedforeasyequipmentaccess• Frontaccesstocenterbodyhingingandbacksectionlatches• Exclusivetoollessself-fasteninglatchiseasytoopen,yet
automaticallyclosessecurely• Latchonfrontofdooreliminatesneedtoaccesssidestoopendoor
orbacksectionlatches• Latch-freesidespermitsideofcabinettobeinstalledtightlyintoa
corner• Fullyweldedandgroundbodyanddoorconstructionforlong-
termgoodappearanceanddurability• Foam-in-placeseamlessgasketarounddoorsealsagainstoutdoor
airinfiltration;isnon-absorbingandchemicalresistant• Onesetofadjustabletappedrackanglesincluded• Optionalsquareholerackanglesavailableforequipment
mountingflexibility• Rackanglesareplatedandself-groundingfordurabilityandsafety
• Collarstudsprovidedonbackofcabinetformountingaccessorypanels
• Accessorypanelsformountingadditionalaccessoriesatthebackofthecabinetincludetie-downpointsandpre-drilledholes
• Plenumratedforuseinairexchangeareas• Availablemodificationsincludepaintcolors,holesandcutouts,
andcustomsizes
Specifications• Doorsandbodymadeof14gaugesteel• Convenientstudsprovidedoncentersectionforbondingand
grounding• Rackanglestapped10-32perEIAstandards;madeof12gauge
self-groundingplatedsteel• Windowisclear,.25in.thick,scratchandimpactresistantsafety
glass• Optionalpolycarbonatewindow(notplenumrated)canbefield-
orfactory-installed.ContactHoffmanCustomerServiceforfactoryinstallation.
• Twenty10-32screwsincluded
FinishPretreatedsteelcoatedwithRAL7035lightgraytextured,lowglosspolyesterpowderpaint.Otherfinishesavailable–contactHoffmanCustomerService.
LoadRatingHEIGHT RATING 16.00(in.)100lb.(45.4kg)20.00(in.)100lb.(45.4kg)24.00(in.)100lb.(45.4kg)36.00(in.)125lb.(56.7kg)48.00(in.)175lb.(79.4kg)
OptionsSeetheappropriateoptionformoreinformation.Optionsinclude:
PROTEK®DHType1,4or12Double-HingedWall-MountCabinetAccessoryPanelsPROTEK®PolycarbonateWindowInsertsPROTEK®RackAnglesBulletin:DWS12
909
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct
CatalogNumber AxBxCin. AxBxCmm RackUnits DoorStyle UL/NEMAType IPRating AccessoryPanel StandardPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDHS162415G4 16.00 x 24.00 x 15.00 406 x 610 x 381 8 Solid 4 IP66 PTPDH1624A A24P16 PTRA1916TPL PTRA1916THLPTDHS162415G 16.00 x 24.00 x 15.00 406 x 610 x 381 8 Solid 12 IP55 PTPDH1624A A24P16 PTRA1916TPL PTRA1916THLPTDHW162415G 16.00 x 24.00 x 15.00 406 x 610 x 381 8 Window 12 IP55 PTPDH1624A A24P16 PTRA1916TPL PTRA1916THLPTDHS202415G4 20.00 x 24.00 x 15.00 508 x 610 x 381 10 Solid 4 IP66 PTPDH2024A A24P20 PTRA1920TPL PTRA1924THLPTDHS202415G 20.00 x 24.00 x 15.00 508 x 610 x 381 10 Solid 12 IP55 PTPDH2024A A24P20 PTRA1920TPL PTRA1924THLPTDHW202415G 20.00 x 24.00 x 15.00 508 x 610 x 381 10 Window 12 IP55 PTPDH2024A A24P20 PTRA1920TPL PTRA1924THLPTDHS242415G4 24.00 x 24.00 x 15.00 610 x 610 x 381 12 Solid 4 IP66 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHS242415G 24.00 x 24.00 x 15.00 610 x 610 x 381 12 Solid 12 IP55 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHW242415G 24.00 x 24.00 x 15.00 610 x 610 x 381 12 Window 12 IP55 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHS362415G4 36.50 x 24.00 x 15.00 927 x 610 x 381 19 Solid 4 IP66 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHS362415G 36.50 x 24.00 x 15.00 927 x 610 x 381 19 Solid 12 IP55 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHW362415G 36.50 x 24.00 x 15.00 927 x 610 x 381 19 Window 12 IP55 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHS482415G4 48.50 x 24.00 x 15.00 1232 x 610 x 381 26 Solid 4 IP66 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THLPTDHS482415G 48.50 x 24.00 x 15.00 1232 x 610 x 381 26 Solid 12 IP55 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THLPTDHW482415G 48.50 x 24.00 x 15.00 1232 x 610 x 381 26 Window 12 IP55 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THLPTDHS242424G4 24.00 x 24.00 x 24.00 610 x 610 x 610 12 Solid 4 IP66 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHS242424G 24.00 x 24.00 x 24.00 610 x 610 x 610 12 Solid 12 IP55 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHW242424G 24.00 x 24.00 x 24.00 610 x 610 x 610 12 Window 12 IP55 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHS362424G4 36.50 x 24.00 x 24.00 927 x 610 x 610 19 Solid 4 IP66 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHS362424G 36.50 x 24.00 x 24.00 927 x 610 x 610 19 Solid 12 IP55 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHW362424G 36.50 x 24.00 x 24.00 927 x 610 x 610 19 Window 12 IP55 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHS482424G4 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 Solid 4 IP66 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THLPTDHS482424G 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 Solid 12 IP55 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THLPTDHW482424G 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 Window 12 IP55 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THL
910
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK®DHDouble-HingeFanandFilterThermalPackages,ULandNEMAType1
IndustryStandards
UL508AListed;Type1;FileNumberE619967cULListedperCSAC22.2No.94;Type1;FileNumberE61997
NEMA/EEMAC:Type1IEC60529,IP55
ApplicationPROTEK®FanandFilterPackagesareidealforprotectingsensitive19-in.rackequipmentfromharmfulenvironmentalcontaminantssuchasfallingdirt,dustanddrippingwater.Useforapplicationswheretheambientaircanbeusedtocooltheinternalequipmentandwhereprotectionfromfallingdirtanddrippingwaterisneeded.Filtersassistinremovingcontaminantsandareeasilyremovedforperiodiccleaningwithoutaccessingthecabinet.Top-mountedfansprovideincreasedairflowandmaximizeheatdissipationofinternallymountedequipment.Bothtop-mountedfansandbottom-mountedintakefiltersarepositionedawayfrom19-inchrack-mountingareas.
Features• Soliddoorprovidescompletephysicalandvisualprotection• Windowdoor,madewithscratch-resistantsafetyglass,provides
equipmentmonitoringwithoutopeningthedoortominimizecontamination
• Fullyweldedandgroundbodyanddoorconstructionforlong-termgoodappearanceanddurability
• Foam-in-placeseamlessgasketarounddoorsealsagainstoutdoorairinfiltration;isnon-absorbingandchemicallyresistant
• Type1cabinetshavewindowdoorsandalockingwingknobwithtwokeys.Theyprovidesecurityandconvenienceinindoorapplications.
• Onesetofadjustabletappedrackanglesincluded
• Optionalsquarehole(.375in.)rackanglesavailableforequipmentmountingflexibility
• Rackanglesareplatedandself-groundingfordurabilityandsafety• Collarstudsprovidedonbackofcabinetformountingaccessory
panels• Accessorypanelsformountingadditionalaccessoriesattheback
ofthecabinetincludetie-downpointsandpre-drilledholes• Plenumratedforuseinairexchangeareas• Double-hingedforeasyequipmentaccess• Frontaccesstocenterbodyhingingandbacksectionlatches• Exclusivetool-lessself-fasteninglatchiseasytoopen,yet
automaticallyclosessecurely• Latchonfrontofdooreliminatesneedtoaccesssidestoopendoor
orbacksectionlatches• Latch-freesidespermitcabinettobeinstalledtightlyintoacorner
Specifications• Doorsmadeof16gaugesteelandbodymadeof14gaugesteel• Convenientstudsprovidedonbothdoorandbodyforbonding
andgrounding• Rackanglestapped10-32perEIAstandards;madeof12gauge
self-groundingplatedsteel• Windowisclear,.25-in.thick,scratch-andimpact-resistantsafety
glass• Optionalpolycarbonatewindow(notplenumrated)canbefield-
orfactory-installed.ContactHoffmanCustomerServiceforfactoryinstallation.
• Twenty10-32screwsincluded• Pagodatop-mounted6-in.fanandbottom-mounted10-in.filter
inlet• Topfanshroudprotectscabinetandfanfromfallingdebrisand
drippingwater• Bottom-mountedairinletwithoutsideremovableandcleanable
filter• Regularfiltercleaningrequiredforoptimumthermalperformance• Operateson110/115VAC50/60Hzlinevoltage• StandardNEMA15Apluginternaltothecabinet(5-15P)
FinishPretreatedsteelcoatedwithRAL7035light-gray,textured,low-glosspolyesterpowderpaint.Otherpaintfinishesavailable—contactHoffmanCustomerServicefordetails.
LoadRatingWARNING:Thecabinetmustbesafelyandcorrectlymountedtothewalltosupportthetotalweightofthecabinetanditscontents.Duetovariousapplicationsandwallconstructions,consultationwithastructuralengineerandanalysisofthemountingwallisadvised.Bulletin:DWDH2
StandardProduct Double-HingedWindow-DoorType1FanandFilterPackages
CatalogNumber AxBxCin. AxBxCmmRackUnits
AccessoryPanels
StandardPanel
AdditionalOptionalRackAngles(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDHW242424GF 24.00 x 24.00 x 24.00 610 x 610 x 610 12 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHW362424GF 36.50 x 24.00 x 24.00 927 x 610 x 610 19 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHW482424GF 48.50 x 24.00 x 24.00 1232 x 610 x 610 26 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THL
LoadRatings
HeightMax.LoadRackAnglesMountedtoCenterSection
Max.LoadAccessoryPanelMountedRearSectiontoCollarStuds
16 in. 100 lb. 50 lb.20 in. 100 lb. 80 lb.24 in. 100 lb. 100 lb.36 in. 125 lb. 200 lb.48 in. 175 lbs. 300 lb.
911
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
TechnicalOperatingInformationFanUnit(6-in.FanwithCord) ReplacementFilterNo.AFLTR10Hz VoltageVAC CFM W@50/60Hz FullLoadAmp@50/60Hz NoiseSIL50/60 115 200/240 36/32 .45/.36 50/56 dB
ThermalPerformanceforFanandFilterDHPackagesPROTEKFanandFilterPackagescalculatedthermalperformanceMax.InternalTemperature:100FVoltage/Hertz:115VAC/60HzFilters:Clean(Regularcleaningrequiredtomaintainairflow)AirVolume:200CFM(ExactCFMdependantonVoltage,Frequency,andfilterefficiency)Max.Elevation:6,000ft.(ContactHoffmanforelevationsabove6,000ft.)
ThermalPerformance PROTEK®FanandFilterPackagesAmbientTemperature(°F) Watts(Heat)Dissipated100 or above Not recommended
Consider PROTEK Air conditioner Package95 31690 63285 94880 126475 158070 189665 221260 252855 2844
Watts = .316 x CFM x Delta T (°F) (at sea level)
Delta T = Max internal Temperature (degrees F) – Ambient external Temperature (degrees F)
Ambient temperature is the air temperature in and around the intake opening of the cabinet. Fan cooling can never cool the equipment below ambient temperature.
912
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK®DHDouble-HingeThermalACPackage,ULandNEMAType4or12
Self-Closing Latch Type 4 Enclosures
IndustryStandardsPROTEKAirConditionerPackagesIndoor(Type12)UL508AListed;Type12;FileNumberE619967cULListedperCSAC22.2No.94;Type12;FileNumberE61997
NEMA/EEMAC:Type12IEC60529,IP66PROTEKAirConditionerPackagesOutdoor(Type4)UL508AListed;Type12,4;FileNumberE619967cULListedperCSAC22.2No.94;Type12,4;FileNumberE61997
NEMA/EEMAC:Type12,4IEC60529,IP66
ApplicationPROTEK®DHThermalPackagesareanexcellent,off-the-shelfchoiceformounting19-in.racknetworkequipmentinwetordirtyenvironmentswherefiltrationorairconditioningisrequiredandfloorspaceisatapremium.Thesecompletepackagescanbemountedtoapoleorwallandhingedontheleftorright.Themountedcabinetswingsopentoprovideeasyequipmentserviceandinstallationaccess.CompleteFanandFilterandAirConditionerPackagesareavailabletomatchapplicationrequirements.
Features• Soliddoorprovidescompletephysicalandvisualprotection• Windowdoor,madewithscratch-resistantsafetyglass,provides
equipmentmonitoringwithoutopeningthedoortominimizecontamination
• Fullyweldedandgroundbodyanddoorconstructionforlong-termgoodappearanceanddurability
• Foam-in-placeseamlessgasketarounddoorsealsagainstoutdoorairinfiltration;isnon-absorbingandchemicallyresistant
• Type12cabinetshavewindowdoorsandalockingwingknobwithtwokeys.Theyprovidesecurityandconvenienceinindoorapplications.
• Type4cabinetshavesoliddoorsandapadlock-capable,tamper-resistant,quarter-turnlatch(toolincluded).Theyprovideeasyoperationandlockingoptionsinindoorandoutdoorapplications.
• Onesetofadjustabletappedrackanglesincluded• Optionalsquarehole(.375in.)rackanglesavailableforequipment
mountingflexibility• Rackanglesareplatedandareself-groundingfordurabilityand
safety• Collarstudsprovidedonbackofcabinetformountingaccessory
panels• Accessorypanelsformountingadditionalaccessoriesattheback
ofthecabinetincludetie-downpointsandpre-drilledholes• Plenumratedforuseinairexchangeareas• Double-hingedforeasyequipmentaccess• Frontaccesstocenterbodyhingingandbacksectionlatches• Exclusivetool-lessself-fasteninglatchiseasytoopen,yet
automaticallyclosessecurely• Latchonfrontofdooreliminatesneedtoaccesssidestoopendoor
orbacksectionlatches• Cabinetshippedwithairconditioneruninstalled
Specifications• Doorsmadeof16gaugesteelandbodymadeof14gaugesteel• Convenientstudsprovidedonbothdoorandbodyforbonding
andgrounding• Rackanglestapped10-32perEIAstandards;madeof12gauge
self-groundingplatedsteel• Windowisclear,.25-in.thick,scratch-andimpact-resistantsafety
glass• Optionalpolycarbonatewindow(notplenumrated)canbefield-
orfactory-installed.ContactHoffmanCustomerServiceforfactoryinstallation.
• Twenty10-32screwsincluded• Right-side-mountedT4LineIndoor/OutdoorAirConditioner• Operateson110/115VAC50/60Hzlinevoltage• StandardNEMA15Apluginternaltothecabinet(5-15P)• Seetablefortechnicaloperatinginformation• Routinemaintenancerequiredforoptimumperformance(see
servicemanual)
FinishPretreatedsteelcoatedwithRAL7035light-gray,textured,low-glosspolyesterpowderpaint.Otherpaintfinishesavailable—contactHoffmanCustomerServicefordetails.
LoadRatingWARNING:Thecabinetmustbesafelyandcorrectlymountedtothewalltosupportthetotalweightofthecabinetanditscontents.Duetovariousapplicationsandwallconstructions,consultationwithastructuralengineerandanalysisofthemountingwallisadvised.Bulletin:DWDH2
StandardProduct Double-HingedWindow-DoorType12AirConditionerPackages
CatalogNumber AxBxCin. AxBxCmmRackUnits
AccessoryPanels
StandardPanel
AdditionalOptionalRackAnglesl(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDHW242429GA 24.00 x 24.00 x 29.00 610 x 610 x 737 12 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHW362429GA 36.50 x 24.00 x 29.00 927 x 610 x 737 19 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHW482429GA 48.50 x 24.00 x 29.00 1232 x 610 x 737 26 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THL
StandardProduct Double-HingedSolid-DoorType4AirConditionerPackages
CatalogNumber AxBxCin. AxBxCmmRackUnits
AccessoryPanels
StandardPanel
AdditionalOptionalRackAnglesl(TappedHoles)
AdditionalOptionalRackAngles(SquareHoles)
PTDHS242429GA4 24.00 x 24.00 x 29.00 610 x 610 x 737 12 PTPDH2424A A24P24 PTRA1924TPL PTRA1924THLPTDHS362429GA4 36.50 x 24.00 x 29.00 927 x 610 x 737 19 PTPDH3624A A36P24 PTRA1936TPL PTRA1936THLPTDHS482429GA4 48.50 x 24.00 x 29.00 1232 x 610 x 737 26 PTPDH4824A A48P24 PTRA1948TPL PTRA1948THL
913
Networking:Wall-MountCabinets
PROTEK®Wall-MountandDouble-HingeCabinets
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
LoadRatings
HeightMax.LoadRackAnglesMountedtoCenterSection
Max.LoadAccessoryPanelMountedRearSectiontoCollarStuds
16 in. 100 lb. 50 lb.20 in. 100 lb. 80 lb.24 in. 100 lb. 100 lb.36 in. 125 lb. 200 lb.48 in. 175 lb. 300 lb.
ThermalPerformanceforAirConditionerDHPackagesPROTEKAirConditionercalculatedthermalperformanceACPerformance:800BTU/houror235WattsVoltage/Hertz:115VAC/60HzMax.AmbientTemperature:131FMin.AmbientTemperature:-40FMax.InternalTemperature:100F(Allowable)
ThermalPerformance PROTEK®AirConditionerAmbientTemperature(°F)
Watts(Heat)DissipatedCabinetHeight:24in.
Watts(Heat)DissipatedCabinetHeight:36in.
Watts(Heat)DissipatedCabinetHeight:48in.
130 N/A N/A N/A120 63 27 N/A110 149 131 105100 234 234 23490 320 338 36480 405 442 49370 491 546 62360 576 649 75250 662 753 88140 747 857 1011
N/A = Not applicable and not recommended in these applications
1 BTU = 3.413 watts
914
Networking:Wall-MountCabinets
PROTEK®Accessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK® Accessories
PROTEK®Single-DoorType4or12Wall-MountCabinetAccessoryPanelsWhereequipmentmountingspaceislimited,AccessoryPanelsincreasecabinetcapacitybyprovidingamountingsurfacefor19-in.equipmentandaccessoriesatthebackofthecabinet.Thepanelsmountoncollarstudsprovidedinthecabinet.TheyincludetiedownsforVELCRO®CableWrapsandmountingholesforrackanglebrackets,shelvesandotheraccessories.Panelshavewhitepaintfinish.
VELCRO is a trademark of Velcro Industries B.V.Bulletin:DWS12
CatalogNumber AxBin. AxBmm Material FitsCabinetSizePTP2424A 22.20 x 22.20 564 x 564 12 gauge steel 24.00 x 24.00PTP3624A 34.20 x 22.20 869 x 564 12 gauge steel 36.00 x 24.00PTP4824A 46.20 x 22.20 1173 x 564 12 gauge steel 48.00 x 24.00
PROTEK®DHType1,4or12Double-HingedWall-MountCabinetAccessoryPanelsWhereequipmentmountingspaceislimited,AccessoryPanelsincreasecabinetcapacitybyprovidingamountingsurfacefor19-in.equipmentaccessoriesatthebackofthecabinet.Thepanelsmountoncollarstudsprovidedinthecabinet.TheyincludetiedownsforVELCRO®CableWrapsandmountingholesforrackanglebrackets,shelves,andotheraccessories.Panelshaveawhitepaintfinishover12gaugesteel.
VELCRO is a trademark of VELCRO Industries B.V.Bulletin:DWS12
CatalogNumberDin./mm
Ein./mm FitsCabinetSize
PTPDH1624A 21.00533
13.00330
16.00 x 24.00
PTPDH2024A 21.00533
17.00452
20.00 x 24.00
PTPDH2424A 21.00533
21.00533
24.00 x 24.00
PTPDH3624A 33.00838
21.00533
36.00 x 24.00
PTPDH4824A 45.001143
21.00533
48.00 x 24.00
915
Networking:Wall-MountCabinets
PROTEK®Accessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PROTEK®RackAnglesSquare-andtapped-holerackanglesfitintoPROTEK®single-anddouble-hingedcabinets.
Bulletin:DWS12
CatalogNumber HoleType FitsCabinetHeightRackUnits
PTRA1916TPL Tapped 16.00 7PTRA1916THL Square 16.00 7PTRA1920TPL Tapped 20.00 10PTRA1920THL Square 20.00 10PTRA1924TPL Tapped 24.00 12PTRA1924THL Square 24.00 12PTRA1936TPL Tapped 36.00 19PTRA1936THL Square 36.00 19PTRA1948TPL Tapped 48.00 26PTRA1948THL Square 48.00 26
PROTEK®PolycarbonateWindowInsertsPolycarbonatewindowinsertsprovideadditionalimpactprotection.Theyarefield-installedinplaceofthesafetyglassprovidedwiththeenclosure.Nospecialtoolsarerequired.
Bulletin:DWS12
CatalogNumber AxBin./mm FitsCabinetSize DescriptionPTWR1624POLY 16.00 x 24.00
406 x 61016.00 x 20.00 Clear, 0.23-in. thick
PTWR2024POLY 20.00 x 24.00 508 x 610
20.00 x 24.00 Clear, 0.23-in. thick
PTWR2424POLY 24.00 x 24.00 610 x 610
24.00 x 24.00 Clear, 0.23-in. thick
PTWR3624POLY 36.00 x 24.00 914 x 610
36.00 x 24.00 Clear, 0.23-in. thick
PTWR4824POLY 48.00 x 24.00 1219 x 610
48.00 x 24.00 Clear, 0.23-in. thick
916
Networking:Wall-MountCabinets
L-BOX®Wall-MountCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
L-BOX® Wall-Mount Cabinet and Accessories
L-BOX®,Type1
IndustryStandards
UL1863Listed;FileNo.E230874UL508AListed;Type1;FileNumberE61997cULListedperCSAC22.2No.182.4;FileNo.E230874VentilationcomplieswithUL60950
DesignedinaccordancewithBICSITDMMTenthedition,Chapter7,TelecommunicationEnclosures(TE)EIA310-DIEC60529,IP30
ApplicationThelow-profile,vertically-orientedL-BOX®wall-mountcabinetisextremelyversatileandcanbeusedinpublicsettingstomount,storeandprotectnetworkequipment,patchpanelsandconnections.Thehinged,L-shapeddoorprovidesfullaccessontwosidestoinstalledequipmentwhilefixedrackanglesaccommodatevaryingequipmentsizes.
Features• Spring-loaded,self-retainedhingepinsallowdoorremoval• 120-degreedooropening• Quarter-turnlatcheswithkeylock(Code333)• Onesetoffixedrackanglesisincludedon24-and36-in.(610-and
914-mm)tallmodelsandtwoon48-in.(1219-mm)tallmodels• Rackangleson36-in.(914-mm)modelscanbepositionedeitherat
thetoporthebottomofthecabinet
• 36-and48-in.(914-and1219-mm)tallmodelshavespaceforpatchpanelorshelfbrackets
• Knockoutsfor4-in.(102-mm)fanontopandbottomofcabinet• Wiringknockouts(7/8in.,1-3/8in.,and3in.)ontopandbottomof
cabinet.Two3-in.cableentryknockoutsonback.• Multiplecabletie-downpointsonbackofcabinet• Keyholemountingslotsspaced16.00in.(406mm)oncenterfor
easycabinetmounting• Includespackageoftwenty10-32mountingscrews
Specifications• Manufacturedfrom14gaugemildsteel• Self-groundingmountinganglesmadeof12gaugeplatedsteel• Bondingprovisionondoor• Groundstudonbody• EIAUniversal5/8-5/8-1/2in.rackanglemountingholepattern
matchesindustrystandards.Holesaretapped10-32.
FinishPretreatedsteelcoatedwithRAL7035light-graytextured,low-glosspolyesterpowderpaint.Otherfinishesavailable—contactHoffmanCustomerService.
LoadRating75lb.(34.0kg)Bulletin:DWS1
StandardProduct CatalogNumber AxBxCin. AxBxCmm H(in.) H(mm) RackUnitsDBL242412G 24.00 x 24.00 x 12.34 610 x 610 x 313 22.00 559 6DBL362412G 36.00 x 24.00 x 12.34 915 x 610 x 313 34.00 864 6DBL482412G 48.00 x 24.00 x 12.34 1220 x 610 x 313 46.00 1168 2 sets of 6
917
Networking:Wall-MountCabinets
L-BOX®Wall-MountCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
918
Networking:Wall-MountCabinets
L-BOX®Wall-MountCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
BondingandGroundingKitProvidesthecableandmountinghardwarerequiredtogroundequipmenttothedoorandthebodyofthecabinet.Bulletin:DWS1
CatalogNumber DescriptionDBGRDK Bonding and Grounding Kit
DuplexOutletKit15Aduplexoutletisfactory-mountedinthree-sided,platedsteelenclosure.Outletenclosuremountsonhingesideofdoorinlowercornerofcabinet.Mountinghardwareprovided.Bulletin:DWS1
CatalogNumber Description CurrentRatingDBDXK Duplex Outlet Kit 15 A
FanFilterandFingerGuardKitLow-densityfilterkitfor4-in.(102-mm)and6-in.(152-mm)fans.Canalsobeusedasvent.Filterisremovableandcanbecleanedandreused.Mountinghardwareincluded.Bulletin:DTHRM,DWS1
CatalogNumber Description FitsAFLTR4LD Fan Filter and Finger Guard Kit 4-in. fansAFLTR6LD Fan Filter and Finger Guard Kit 6-in. fans
PatchPanelRackAnglesSwivelingrackanglesdrop45degreestoprovideconvenientaccesstoequipmentmountedonpatchpanels.Provideadditionalpatchpanellocationin36-and48-in.(914-and1219-mm)highcabinets.Madeofself-grounding,plated12gaugesteel.Mountinghardwareincluded.Setoftwo.Bulletin:DWS1
CatalogNumber Description RackUnitsDBPRA4U Patch Panel Rack Angles 4
919
Networking:Wall-MountCabinets
L-BOX®Wall-MountCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
ShelvesShelvesprovideadditionalstoragein36-and48-in.(914-and1219-mm)tallcabinets.Madeofself-groundingplated16gaugesteel.75lb.(34.0kg)loadrating.RAL7035polyesterpowdercoatfinish.Bulletin:DWS1
CatalogNumber DescriptionLengthin./mm
Depthin./mm FitsCabinetDepth
DBSHELF8 Steel Shelf 19.05484
7.25184
8 in.
DBSHELF12 Steel Shelf 19.05484
11.08281
8 or 12 in.
StrutWall-MountingKitProvidessecuremountingforcabinet.RAL7035polyesterpowdercoatfinish.Bulletin:DWS1
CatalogNumber DescriptionLengthin./mm
DB24WMTK Strut Wall-Mounting Kit 24.00610
920
Networking:Wall-MountCabinets
D-BOX™Wall-MountEnclosureandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
D-BOX™ Wall-Mount Enclosure and Accessories
D-BOX™,Type1
IndustryStandards
UL1863Listed;FileNo.E230874UL508AListed;Type1;FileNumberE61997cULListedperCSAC22.2No.182.4;FileNo.E230874VentilationcomplieswithUL60950
TelcordiaNEBSTMRequirements:PhysicalProtection,GR-63-CORE,Zone4.Testedwith100lb.(45.4kg)ofequipmentinstalled.DesignedinaccordancewithBICSITDMMTenthedition,Chapter7,TelecommunicationEnclosures(TE)EIA310-DIEC60529,IP40
ApplicationIdealforretailapplicationswhereitisnecessarytohouse19-in.networkequipmentinapubliclocation,thehorizontally-orientedD-BOX™isalow-profilecabinetwithahingeddoorforconvenientfrontaccessandacombinationoffixedandrotatingrackanglestoaccommodatevaryingequipmentsizes.
Features• Spring-loaded,self-retainedhingepinsallowdoorremoval
• Reversibledoorfitsflushtobodywithnoexposedcorners• Knockoutsfor4-in.fanontopandbottomofenclosure• Wiringknockouts(7/8in.,1-3/8in.,and3in.)ontopandbottomof
enclosure.Two3-in.cableentryknockoutsonback.• 120-degreedooropening• Multiplecabletie-downpointsonbackofenclosure• Quarter-turnlatchwithkeylock• Keyholemountingslotsspaced16.00in.(406mm)oncenterfor
easyenclosuremounting• Bossesprovidedformountingaccessoriessuchascablespools• Self-groundingmountinganglesmadeof12gaugegalvanized
steel• Patchpanelmountinganglesrotatedownforaccess• Flangearounddooropeningprotectsinterior• Bondingprovisionondoor• Groundstudonbody• EIAUniversal5/8-5/8-1/2in.verticalmountingholepattern
matchesindustrystandards.Holesaretapped10-32.• Includespackageoftwenty10-32mountingscrews
Specifications• Doormanufacturedfrom14gaugemildsteel• Bodymanufacturedfrom16gaugemildsteel
FinishPretreatedsteelcoatedwithRAL7035light-graytextured,low-glosspolyesterpowderpaint.Otherfinishesavailable—contactHoffmanCustomerService.
LoadRating100lb.(45.4kg)Bulletin:DWS1
921
Networking:Wall-MountCabinets
D-BOX™Wall-MountEnclosureandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct CatalogNumber AxBxCin. AxBxCmm H(in.) H(mm) RackUnitsDBS24248G 24.00 x 24.00 x 8.34 610 x 610 x 212 22.00 559 4DBS36248G 36.00 x 24.00 x 8.34 915 x 610 x 212 34.00 864 4DBS48248G 48.00 x 24.00 x 8.34 1220 x 610 x 212 46.00 1168 4DBS242412G 24.00 x 24.00 x 12.34 610 x 610 x 313 22.00 559 6DBS362412G 36.00 x 24.00 x 12.34 915 x 610 x 313 34.00 864 6DBS482412G 48.00 x 24.00 x 12.34 1220 x 610 x 313 46.00 1168 6
922
Networking:Wall-MountCabinets
D-BOX™Wall-MountEnclosureandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
BondingandGroundingKitProvidesthecableandmountinghardwarerequiredtogroundequipmenttothedoorandthebodyofthecabinet.Bulletin:DWS1
CatalogNumber DescriptionDBGRDK Bonding and Grounding Kit
DuplexOutletKit15Aduplexoutletisfactory-mountedinthree-sided,platedsteelenclosure.Outletenclosuremountsonhingesideofdoorinlowercornerofcabinet.Mountinghardwareprovided.Bulletin:DWS1
CatalogNumber Description CurrentRatingDBDXK Duplex Outlet Kit 15 A
EquipmentRackAnglesFixedrackanglescanbeaddedto36-in.and48-in.tallcabinetsforextra19-inrackequipmentmounting.Madeofsteelwithclearzincplating.EIAspacedholesaretapped10-32.Mountstoraisedpadsoncabinetinsidebackwithprovidedhardware.Bulletin:DWS1
CatalogNumber Description RackUnitsDBERA4U Equipment Rack Angles 4DBERA6U Equipment Rack Angles 6
FanFilterandFingerGuardKitLow-densityfilterkitfor4-in.(102-mm)and6-in.(152-mm)fans.Canalsobeusedasvent.Filterisremovableandcanbecleanedandreused.Mountinghardwareincluded.Bulletin:DTHRM,DWS1
CatalogNumber Description FitsAFLTR4LD Fan Filter and Finger Guard Kit 4-in. fansAFLTR6LD Fan Filter and Finger Guard Kit 6-in. fans
PadlockKitKitincludesfieldinstallablehaspandstaple.Fitspadlockswithmaximum5/16in.(8mm)shacklediameter.Nodrillingorlayoutrequired.Includesmountinghardware.Bulletin:DWS1
CatalogNumber DescriptionDBPDLK Padlocking Kit
923
Networking:Wall-MountCabinets
D-BOX™Wall-MountEnclosureandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PatchPanelRackAnglesSwivelingrackanglesdrop45degreestoprovideconvenientaccesstoequipmentmountedonpatchpanels.Provideadditionalpatchpanellocationin36-and48-in.(914-and1219-mm)highcabinets.Madeofself-grounding,plated12gaugesteel.Mountinghardwareincluded.Setoftwo.Bulletin:DWS1
CatalogNumber Description RackUnitsDBPRA4U Patch Panel Rack Angles 4
ShelvesShelvesprovideadditionalstoragein36-and48-in.(914-and1219-mm)tallcabinets.Madeofself-groundingplated16gaugesteel.75lb.(34.0kg)loadrating.RAL7035polyesterpowdercoatfinish.Bulletin:DWS1
CatalogNumber DescriptionLengthin./mm
Depthin./mm FitsCabinetDepth
DBSHELF8 Steel Shelf 19.05484
7.25184
8 in.
DBSHELF12 Steel Shelf 19.05484
11.08281
8 or 12 in.
StrutWall-MountingKitProvidessecuremountingforcabinet.RAL7035polyesterpowdercoatfinish.Bulletin:DWS1
CatalogNumber DescriptionLengthin./mm
DB24WMTK Strut Wall-Mounting Kit 24.00610
924
Networking:Wall-MountCabinets
POLYPRO®WiFi,Type4X
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
POLYPRO® WiFi, Type 4X
POLYPRO®WiFi,Type4X
IndustryStandards
UL508AListed;Type4,4X,12,13;FileNo.E61997cULListedperCSAC22.2No94;Type4,4X,12,13;FileNo.E61997EnclosureflammabilityevaluatedperUL508AWindowflammabilityevaluatedperUL508A
NEMA/EEMACType4,4X,12,13CSAFileNo.42186;Type4,4X,12,13(solidcoversonly)IEC60529,IP66
ApplicationPOLYPRO®WiFienclosuresprovideprotectionforwirelessequipmentinbothindoorandoutdoorlocations.ThepolyesterconstructionandwoodpanelallowWiFiandWLANsignalstopassthroughtheenclosureunimpeded.Theyperformexceptionallywellinapplicationswhereharshchemicals,weatherextremes,acorrosiveenvironmentorflamesdemandtoughnessfromalightweightenclosure.Providingexcellentultravioletprotectionandatightenvironmentalseal,theseversatile,feature-richenclosuresarealsorecyclable.
Features• Non-glass-filledpolyestermaterialofferssuperiorUVresistance;
eliminatesfiberbloomassociatedwithfiberglass• Providesexcellentchemicalresistancetoabroadrangeof
solvents,alkalisandacids• Resistscrackingandprovidesexcellentimpactresistance• Lighter-weightthanfiberglass• Recyclable• Easy,dustlessin-fieldmodificationsusingstandardtools• Overlappingtongue-and-grooveraisedcoverandgasketprovide
secureType4Xseal• Removablesnap-hingecoverallowsforeasyaccesstocoverand
bodyformodifications• Moldedlayoutgridoninsideofbodyandsolidcoversassistswith
componentmounting• Molded-inembossesforrearpanelmounting• Internalrailsystemandadjustablepanelblocksallowforpanel
heightadjustmentandinstallationofmultiplepanels
Specifications• Scratch-resistantpolycarbonatewindows• Standardmodelsincludebodyandcover,twomountingfeet,two
latchassemblieswithoptionalcoverscrewsandhardware,and3/4-in.plywoodpanel
FinishPolyestermaterialisRAL7035light-graytexturedfinishinsideandoutBulletin:DWS12
925
Networking:Wall-MountCabinets
POLYPRO®WiFi,Type4X
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
StandardProduct
CatalogNumber AxBxCin./mm DoorType
PanelSizeDxEin./mm
Fin./mm
Gin./mm
Hin./mm
Jin./mm
Lin./mm
Min./mm
Nin./mm
Win./mm
D664WF 6.12 x 6.12 x 4.38 155 x 155 x 111
Solid 4.88 x 2.88124 x 73
4.32110
7.38187
2.5665
3.9199
8.15207
——
——
5.23133
D664WFW 6.12 x 6.12 x 4.38 155 x 155 x 111
Window 4.88 x 2.88124 x 73
4.32110
7.38187
2.5665
3.9199
8.15207
4.25108
2.2557
5.23133
D16148WF 16.12 x 14.01 x 8.35 409 x 356 x 212
Solid 14.75 x 12.88375 x 327
8.27210
17.27439
12.56319
7.91201
18.04458
——
——
15.32389
D16148WFW 16.12 x 14.01 x 8.35 409 x 356 x 212
Window 14.75 x 12.88375 x 327
8.27210
17.27439
12.56319
7.91201
18.04458
14.25362
12.25311
15.32389
926
Networking:Wall-MountCabinets
POLYPRO®WiFi,Type4X
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
AdjustablePanelBlockKitPanelblocksslideinsidePOLYPROinternalrailsystemforpanelheightadjustmentwithintop5in.ofenclosure.Allowsforinstallationofmultiplepanels.Bulletin:PCRY
CatalogNumber Qty.APNLBLK 4
Includes Allen wrench
PolyesterMountingBracketKitsReplacementPOLYPROmountingbracketsaresoldinsetsoftwoandincludehardwareformountingtoenclosure.Included with standard POLYPRO models.Bulletin:PCRY
CatalogNumber Description(in.) Qty.APOLYFT4 4.00 2APOLYFT6 6.00 2APOLYFT8 8.00 2APOLYFT10 10.00 2APOLYFT12 12.00 2APOLYFT14 14.00 2APOLYFT16 16.00 2
927
Networking:Wall-MountCabinets
POLYPRO®WiFi,Type4X
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
AluminumSwing-OutPanelsIncludesfourPOLYPROAdjustablePanelBlocks.Noenclosuremodificationisrequiredforinstallation.Bulletin:PCRY
CatalogNumber DxE(in.) DxE(mm)A64PSWPNL 5.00 x 3.62 127 x 92A66PSWPNL 5.00 x 5.62 127 x 143A86PSWPNL 7.00 x 5.62 178 x 143A88PSWPNL 7.00 x 7.62 178 x 194A108PSWPNL 9.00 x 7.62 229 x 194A1010PSWPNL 9.00 x 9.62 229 x 244A1210PSWPNL 11.00 x 9.62 279 x 244A1412PSWPNL 13.00 x 11.62 330 x 295A1614PSWPNL 15.00 x 13.62 381 x 346A1816PSWPNL 17.00 x 15.62 432 x 397
StainlessSteelLatches(Padlockable) StainlessSteelLatchescanberetrofittedonallPOLYPROmodelswithnomodificationordrillingrequired.Hinge/latchconstructedofcorrosion-resistantpolyesterwithaType316Lstainlesssteelbail.IncludedwithstandardPOLYPROmodels.Bulletin:PCRY
CatalogNumber Qty.AQRLSS6 2
HingeRetainers HingeRetainerscanbefield-installedwithoutmodificationtoPOLYPROhingesforapplicationswhereeasycoverremovalisnotdesired.Tworetainersperenclosureisrecommended.Kitincludestenhingeretainers.Bulletin:PCRY
CatalogNumber Description Pkg.Qty.AHGCLP POLYPRO Hinge Retainers 10
928
Networking:Wall-MountCabinets
FiberglassHinge-CoverType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Fiberglass Hinge-Cover Type 4X WiFi Cabinet and Accessories
Hinge-CoverWiFi,Type4X
IndustryStandards
UL508AListed;Type4,4X,12,13;FileNo.E61997cULListedperCSAC22.2No94;Type4,4X,12,13;FileNo.E61997EnclosureflammabilityratingperUL508
NEMA/EEMACType4,4X,12,and13WindowflammabilityratingperUL508CSAFileNo.LR42186:Type4,4X,12,and13IEC60529,IP66Cabinetswithsoliddoorsareplenumrated.
ApplicationThefiberglassWiFiCabinetisasecure,hingedenclosurethatdoesnotimpedeWiFiorWLANsignals.Itisidealforhousingwirelessequipmentinlocationssuchastunnels,floorvaults,marinas,outsidewallsorrooftops.
Features• Fiberglassiseasilypunched,drilled,filedorsawed• Seamlessfoam-in-placegasketassureswatertightanddusttight
seal• Molded-in-placethreadedbrassinsertsandplatedsteelscrewsare
providedformountingoptionalpanelsandterminalblockkits• RemovablehingedcoverattachedtobodywithType316stainless
steelhingepin• ScrewcoverenclosuresaresecuredwithtwocaptivatedType316
stainlesssteelslottedcross-pointcoverscrews• Availablequick-releaselatchesarecorrosion-resistantpolyester
locatedincornerstoprovideunobstructedaccesstoenclosure• Knockoutpadlockprovisionsincludedineachlatch
Specifications• Enclosureanddoormadeofmoldedfiberglasspolyesterthat
resistschemicalsandtemperaturechange• Scratch-resistantGELexanMargard®windowsarepermanently
bondedinplace• Polyestermountingbracketsandstainlesssteelattachmentscrews
areprovidedwitheachenclosure• Hingepinandbailarecorrosion-resistantType316stainlesssteel• Includesa3/4-in.plywoodpanelformountingequipment
FinishFiberglassmaterialislightgrayinsideandout.Bulletin:DWS12
StandardProduct SolidDoor
CatalogNumber AxBxCin./mm Panel
PanelDXEin./mm
MountingGxHin./mm
OverallSizeLxWin./mm
Jin./mm
Kin./mm
Oin./mm
Pin./mm
Qin./mm
Rin./mm
Tin./mm
Uin./mm
D664CHSCFGP 6.00 x 6.00 x 4.00 152 x 152 x 102
A6P6WD 4.88 x 4.88124 x 124
6.94 x 4.00176 x 102
6.50 x 6.50165 x 165
3.2583
1.0025
4.25108
4.25108
5.64143
5.12130
.123
5.64143
D16148CHSCFGP 16.00 x 14.00 x 8.00 407 x 356 x 203
A16P14WD 14.75 x 12.88375 x 327
16.94 x 12.00430 x 305
16.55 x 14.55420 x 370
6.23158
2.0853
12.25311
14.25362
15.56395
15.12384
.154
13.56344
D181610CHSCFGP 18.00 x 16.00 x 10.00 457 x 407 x 254
A18P16WD 16.75 x 14.88425 x 378
18.94 x 14.00481 x 356
18.58 x 16.58472 x 421
7.66195
2.6668
14.25362
16.25413
17.53445
17.12435
.164
15.53394
Wood panels included with enclosure. Optional steel panels must be ordered separately.
StandardProduct WindowDoor
CatalogNumber AxBxCin./mm Panel
PanelDXEin./mm
MountingGxHin./mm
OverallSizeLxWin./mm
Jin./mm
Kin./mm
Oin./mm
Pin./mm
Qin./mm
Rin./mm
Tin./mm
Uin./mm
D664CHSCFGWP 6.00 x 6.00 x 4.00 152 x 152 x 102
A6P6WD 4.88 x 4.88124 x 124
6.94 x 4.00176 x 102
6.50 x 6.50165 x 165
3.2583
1.0025
4.25108
4.25108
5.64143
5.12130
.123
5.64143
D16148CHSCFGWP 16.00 x 14.00 x 8.00 407 x 356 x 203
A16P14WD 14.75 x 12.88375 x 327
16.94 x 12.00430 x 305
16.55 x 14.55420 x 370
6.23158
2.0853
12.25311
14.25362
15.56395
15.12384
.154
13.56344
D181610CHSCFGWP 18.00 x 16.00 x 10.00 457 x 407 x 254
A18P16WD 16.75 x 14.88425 x 378
18.94 x 14.00481 x 356
18.58 x 16.58472 x 421
7.66195
2.6668
14.25362
16.25413
17.53445
17.12435
.164
15.53394
929
Networking:Wall-MountCabinets
FiberglassHinge-CoverType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Quick-ReleaseLatchKit Twofiberglass-reinforcedgraypolyesterlatcheswith316Lstainlesssteelbailandscrew-holeplugsareincludedineachpackage.SuppliedwithContinuousHinge,Type4XenclosuresandavailableforFiberglassHingedCoverWiFiCabinet,Type4X.Kitconvertsscrew-coverenclosurestoquick-releasewithoutmodification.Notoolsneededtoinstall.Padlockingprovisionisincluded.Bulletin:A48Y
CatalogNumber Description KitQty.AL48 Quick-Release Latch Kit 2
930
Networking:Wall-MountCabinets
FiberglassHinge-CoverType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
PanelsforWiFiCabinetsandSmallWall-MountEnclosures
Panelsareavailableinbothsteelandwood.Steelpanelsare14gaugesteelwithawhitepolyesterpowderpaintfinish.Woodpanelsare3/4-in.plywoodandareunfinished.WoodpanelsaresuppliedwithFiberglassHinged-CoverandPOLYPRO®Type4XWiFiCabinets.Bulletin:DWS12,PNLJ,PNLWM
CatalogNumber MaterialPanelSizeDxE(in.)
PanelSizeDxE(mm) V(in.) V(mm)
A6P6 Steel 4.88 x 4.88 124 x 124 0.31 8A6P6WD Wood 4.88 x 4.88 124 x 124 0.31 8A16P14 Steel 14.75 x 12.88 375 x 327 0.25 6A16P14WD Wood 14.75 x 12.88 375 x 327 0.25 6A18P16 Steel 16.75 x 14.88 425 x 378 0.25 6A18P16WD Wood 16.75 x 14.88 425 x 378 0.25 6
931
Networking:Wall-MountCabinets
ULTRX®FiberglassType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
ULTRX® Fiberglass Type 4X WiFi Cabinet and Accessories
ULTRX®WiFi,Type4X
IndustryStandards
UL508AListed;Type4,4X,12,13;FileNo.E61997cULListedperCSAC22.2No94;Type4,4X,12,13;FileNo.E61997EnclosureflammabilityratingperUL508WindowflammabilityratingperUL508
NEMA/EEMACType4,4X,12,13CSAFileNo.LR42186:Type4,4X,12,13IEC60529,IP66Cabinetswithsoliddoorsareplenumrated.
ApplicationIdealforlocationssuchastunnels,floorvaults,marinas,outsidewallsorrooftops,thelightweightULTRX®fiberglassWiFicabinetdoesnotimpedeWiFiorWLANsignalsandhasoptionalrackanglesthatcanbeaddedtosupport19-in.rack-mountequipment.
Features• Fiberglassiseasilypunched,drilled,filedorsawed• Seamlessfoam-in-placegasketassureswatertightanddusttight
seal• Enclosuremayberotated180degreesforleftandrighthinging• Molded-indripshieldsarestandardwitheachenclosure• Dooropens180degrees• Replaceablebreakawayhinges• Keylockinghandlestandard• Molded-inDINbosses• Moldedbossesondoorprovideadditionalmountingprovisions• Integralmountingrailsprovideinfinitepaneladjustmentfrontto
back• Optionaldatapocketishigh-impactthermoplastic
Specifications• Enclosureanddoormadeofmoldedfiberglasspolyesterthat
resistschemicalsandtemperaturechange• Impact-resistantpolycarbonatewindowispermanentlybondedin
place• Fiberglassmountingbracketsandstainlesssteelattachment
screwsareprovidedwitheachenclosure• Includesa3/4-in.plywoodpanelformountingequipment
FinishExteriorsurfacepaintedlight-grayacrylicenamelforenhancedUVprotection.Bulletin:DWS12
StandardProduct
CatalogNumber AxBxCmm/in. DoorType
InternalDimensionsAxBxCmm/in. Panel
PanelSizeDxEmm/in.
MountingGxHmm/in.
WindowSizeMxNmm/in.
Fmm/in.
Jmm/in.
Kmm/in.
Pmm/in.
Qmm/in.
Rmm/in.
Smm/in.
Tmm/in.
DU606030P 608 x 595 x 321 23.94 x 23.44 x 12.64
Solid 608 x 595 x 32123.94 x 23.44 x 12.64
A24P24WD 533 x 53321.00 x 21.00
555 x 56821.86 x 22.36
498 x 48619.62 x 19.12
28711.31
50019.68
210.81
622.43
682.68
562.21
48919.25
48919.25
DU606030WP 608 x 595 x 321 23.94 x 23.44 x 12.64
Window 608 x 595 x 32123.94 x 23.44 x 12.64
A24P24WD 533 x 53321.00 x 21.00
555 x 56821.86 x 22.36
498 x 48619.62 x 19.12
28711.31
50019.68
210.81
622.43
682.68
562.21
48919.25
48919.25
Wood panel included with enclosure. Optional steel panels must be ordered separately.
Window size applies to window door cabinets only.
932
Networking:Wall-MountCabinets
ULTRX®FiberglassType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
933
Networking:Wall-MountCabinets
ULTRX®FiberglassType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
ULTRX®Panel
Panelsareavailableinbothsteelandwood.Steelpanelsare14gaugesteelandhaveawhitefinish.Panelshavetwo.75-in.(19-mm)highedgeflanges.TheyrequirethePanelBracketKit,catalognumberUUPB,tomountintheenclosure.Woodpanelsare3/4-in.plywoodandareunfinished.Woodpanelsaresuppliedwiththeenclosures.Bulletin:DWS12,PNLWM
CatalogNumber MaterialDmm/in.
Emm/in.
Vmm/in.
A24P24 Steel 53321.00
53321.00
6.25
A24P24WD Wood 53321.00
53321.00
6.25
Requires UUPB Panel Bracket Kit to mount steel panel in cabinet.
SwingFrame
SwingFrameprovides19-in.rack-mountingcapabilitieswithU-Style(TypeRA)mountingholepattern.Quarter-turnlatchhas100-degreeswing.Adjustablemountingprovision.14gaugeplatedsteel.Includesmountinghardware.SwingframemaintainsenclosureratingifproperlyinstalledinaHoffmanenclosure.Swing Frame will not slide all the way forward in 400-mm-deep enclosures. Consult factory for more information.Bulletin:UX1Y
CatalogNumberFitsAxBmm/in.
Lmm/in.
Wmm/in.
RackUnits
UU6060SF 610 x 61024.00 x 24.00
54021.25
53521.08
11
UU7560SF 762 x 61030.00 x 24.00
68727.05
53521.08
14
Use UU6060SF with DATACOM ULTRX Fiberglass Type 4X WiFi Cabinet.
RackAngles(TypeRA)
Pairsoffull-lengthrack-mountinganglesareavailableformounting1-in.(483-mm)rack-mountedequipment.TypeRAanglesare14gaugesteelwith.281-in.(7-mm)diametermountingholes,spacedperEIAstandardRS-310-D(universalspacing).UseClipNutPackage(AN1032)toprovidetappedholesatdesiredlocations.Anglesandmountinghardwareareplatedsteel.Mountinghardwareisfurnished.Bulletin:UX1Y
CatalogNumber
FitsAxB
mm/in.Lmm/in.
Nmm/in.
RackUnits
Pkg.Qty.
UURA6060 610 x 61024.00 x 24.00
55221.75
10.38
12 2
UURA7560 762 x 61030.00 x 24.00
70527.75
19.75
15 2
Use UURA6060 with DATACOM ULTRX Fiberglass Type 4X WiFi Cabinet.
934
Networking:Wall-MountCabinets
ULTRX®FiberglassType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
GroundingDeviceGroundingDeviceprovidesameanstoattachagroundingconductortoanULTRXSwing-OutPanelorSwing-OutFrame.Includesallinstallationhardwareandinstructions.Bulletin:UX1Y
CatalogNumber DescriptionUUGK ULTRX Grounding Device
KeylockKitandPadlockKit
KeylockKitorpushbutton-stylePadlockKitiseasilyinsertedinlatchholetopreventunauthorizedpersonnelfromgainingaccesstoenclosurecontents.Eachkitisfullyassembledforeasyinstallationinthefield.Type316stainlesssteelconstruction.Bulletin:UX1Y
CatalogNumber DescriptionUUHKL Keylock KitUUHPL Padlock Kit
UUHKL: Internal key components are not stainless steel.
UUHPL: Handles maintain UL 508A, Type 3, 4, 4X and 12 when properly installed on a Hoffman enclosure. Set up for 1/4-in. or 3/8-in. padlock.
ULTRX®MountingBracketKitKitisfield-installable.Corrosion-resistantfiberglassmaterial.Type316stainlesssteelmountinghardwareisincluded.Fourmountingbracketsperkit.Bulletin:UX1Y
CatalogNumber Description KitQty.UUMF Mounting Bracket Kit 4
935
Networking:Wall-MountCabinets
ULTRX®FiberglassType4XWiFiCabinetandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Notes
936
Networking:Wall-MountCabinets
SecurityWall-MountandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Security Wall-Mount and Accessories
SecurityDVRand19-in.RackEquipmentCabinet,Type1
IndustryStandards
UL508AListed;Type1
CSA;Type1NEMA/EEMAC;Type1IEC60529IP20EIA310-D(19-in.spacingforrackequipment)HoffmanisanISO9001company
ApplicationThesecabinetsprovidephysicalprotectionandaccesscontroltoDVR,19-in.equipmentorotherequipment.Mountthecabinetverticallyorhorizontallyonanysurface.
Features• Houses19-in.orshelf-mountequipment• Topcoverhastool-lessremoval,iscaptivatedbydoorandsecured
bykeylock,providingeasyaccessandinstallation• Solidtopcoverprotectsequipmentfromfallingdebris• Twostandardmodelsare4and6RUhigh• Radiuscornersgivestreamlinedappearanceandeliminatesharp
edges• Solidfrontdoorhas180-degreeopeningcontinuoushinge• Quarter-turnkeylockwithtwokeysondoor(code333)• Ventedsidesdissipateheatfromequipment• Afan-readycutoutisprovidedonleftside
• 14gaugesteelrackanglesareadjustablewithinthecabinetbody• Rackanglemountingsquareholes(.375x.375in.)withEIA
universalholespacing(1/4x5/8x5/8x1/4-in.)• Knockoutsonbottomandsidefordataandpowercables• Rubberfeetprovidesecureplacementandpreventscratches• Fastenersandcagenutsincluded
Specifications• Doorsandbodymadeof18gaugesteel;topcoveris16gauge
steel• Weldedsteelconstruction• OnesetofrackanglesincludedperEIAstandard• Includedinstallationinstructionsshowoptionalaccessories
FinishPretreatedsteelcoatedwithRAL9005black,light-textured,low-glosspolyesterpowderpaint
AccessoriesSee also Accessories.Rack-andPanel-MountPowerDistributionUnit(PDU)ReplacementKeysDualThermostatVELCRO®CableWrapVELCRO is a trademark of Velcro Industries B.V.Bulletin:D85,DACCY,DWS1
StandardProduct
CatalogNumberAxBxCin./mm RackUnits(RU)
DVR4U 9.45x21.65x18.35240x550x466
4
DVR6U 12.99x21.65x18.35330x550x466
6
GeneralAccessories CatalogNumber Description KeyCodeE333KEY 2 replacement keys (fits all locks) 333A4AXFNGQ Fan, 115 VAC, plus
937
Networking:Wall-MountCabinets
SecurityWall-MountandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
938
Networking:Wall-MountCabinets
SecurityWall-MountandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
19-in.ElectronicCase,Type1
IndustryStandardsNEMAType1EIA310-D/IEC297-1IEC60529,IP20
ApplicationPrimarilyusedtohouselabelectronics,lightweightElectronicCasesaccommodate19-in.sub-racks,chassisandpanelsinarigidventilatedcasewithintegralhandles.
Features• Aluminumextrusionsattachtofrontandrearframestocreatea
rigidsupportingframework• Sideson3Uand4Utallcasesarealuminumextrusionswith
integralcarryinghandle.6Utallcaseshavesteel(1.5-mm)sideswithrecessedhandles.9Uand12Utallcaseshave1.5-mmaluminumsideswithrecessedhandles.
• Removabletopandbottomcoversattachdirectlytothecaseframework
• Bottomcoverhasmultiplerowsofslotsforventilation• Rearcoverhasventilationlouvers• Coversare1-mmsteelon3U,4U,6Utallcasesand1-mmaluminum
on9Uand12Utallcases.Coversincludegroundingprovisions.• Caseframeworkisassembledwithrearcoverinstalled• Topcover,bottomcover,anti-skidfeetandmountinghardwareare
included• Optionaltip-upfootkit,equipmentguidesandcagenutsare
available
Specifications• Onepiecealuminumdie-castframeonfrontandrear• 19-in.rack-mountingprovisionsonbothfrontandrearframe
complywithEIA310-D/IEC297-1widespacing• 9-mmsquareholesaccommodatecagenutsformounting
FinishFrameworkandrearcoverhaveastone-graytexturedfinish(RAL7030).Topandbottomcoversandmetalsideshavealight-graytexturedfinish(RAL7035).
AccessoriesHardwareKitsSlideRailsTip-UpFootKit
Bulletin:DEC1
StandardProduct CatalogNumber AxBxCmm AxBxCin. F(mm) F(in.)EEC3U5250 166 x 520 x 500 6.50 x 20.50 x 19.70 133 5.24EEC4U5250 210 x 520 x 500 8.30 x 20.50 x 19.70 178 7.01EEC6U5260 299 x 520 x 600 11.80 x 20.50 x 23.60 267 10.51EEC9U5260 433 x 520 x 600 17.00 x 20.50 x 23.60 400 15.75EEC12U5260 566 x 520 x 600 22.30 x 20.50 x 23.60 533 20.98
939
Networking:Wall-MountCabinets
SecurityWall-MountandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Tip-UpFootKitforElectronicCaseTip-upfeetcanbemountedonthebottomcovertoprovideanimprovedviewingangleforrackmountedequipmentinstalledinanelectroniccase.Intip-upposition,frontofcaseisraised1.38in.(35mm).Feetattachtoholesprovidedinthebottomcoverandincludeananti-skidrubberinsert.Feetaregrayplastic.Bulletin:DEC1
CatalogNumber Description KitIncludesEECFTP Tip-Up Foot Kit 2 tip-up feet, 2 standard feet and mounting hardware
SlideRailsforElectronicCaseSlideRailssupporta19-in.subrackorchassiswheninstalledinanelectroniccase.Railsattachtoprotrusionsontheinsidefrontandbackcastingsofthecaseframework.Theyarepositionableinincrementsof1.75in.(44mm)vertically.Sliderailsarealuminumextrusionswithaclearanodizedfinish.Theysnapintoplace;nomountinghardwareisrequired.Bulletin:DEC1
CatalogNumber FitsCase PackageIncludesEECCR50 500-mm deep 1 railEECCR60 600-mm deep 1 rail
HardwareKitsforElectronicCaseUsetomountElectronicCaseonrackangleswith9-mmsquareholes.Bulletin:DACCY,P20,X20
CatalogNumber Description PackageIncludes PackageQty.ECNSM6 M6 fastener package Pan head Posidrive plated M6 x 16 screws, ABS black plastic cup washers and plated cage nuts 8PM5CN M5 cage nut package M5 plated cage nuts 50ASM5 M5 screw package Pan head combination screws 20
940
Networking:Wall-MountCabinets
19-in.Rack-Mount/DesktopCaseandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
19-in. Rack-Mount/Desktop Case and Accessories
19-in.Rack-Mount/DesktopCase,Type1
IndustryStandardsNEMAType1IEC60529,IP20ExteriorDimensionsEIA310-D/IEC297-1DIN41494Part1
ApplicationDesktopcaseshousecircuitboardsandotherelectronicequipmentinarigidframeworkwitheasyfrontandrearaccess.Rackcasesare19-in.rackmountablewithintegralmountingprovidedinthefrontbezel.
Features• Removabletopandbottomcoversattachdirectlytocase
frameworkformaintenanceconvenience• Bottomcoverhasmultiplerowsofholesforventilation• Frontbezelincludesmountingprovisionsfor19-in.rackmounting
aswellasmountingforfrontpaneloptionsforapplicationflexibility
• Topandbottomofframeworkhavemountingprovisionsforoptionalsupportrailsforapplicationflexibility.Mountingholesarespacedon10-mmcentersfronttoback.
• Caseframeworkisassembledforquickinstallation.Topcover,bottomcover,anti-skidfeetandmountinghardwareareincluded.
• Mountinghardwareforoptionalfrontandrearpanelsareincludedwithcaseforinstallationconvenience
Specifications• One-piecealuminumdiecastfrontbezelandrearbezelare
connectedfront-to-backwithaluminumextrusionstoformarigidstructuralframework
• Sideson3U-and4U-tallcasesarethealuminumfront-to-backextrusions.The6U-tallcasehastwoaluminumextrusionswithasteelmiddlepaneloneachside.
• Coversare1-mmsteelandhavegroundingprovisions
FinishFrameworkhasanRAL7030stone-graytexturedfinish.TopandbottomcovershaveanRAL7035light-graytexturedfinishontheoutsideandaplatedfinishontheinside.Bulletin:DEC1
StandardProduct
CatalogNumber AxBxCmm/in.Emm/in.
Fmm/in.
Gmm/in.
Hmm/in. RackUnits
ERC3U4837 133 x 483 x 375 5.20 x 19.00 x 14.80
1315.14
1034.04
572.25
1104.33
3
ERC4U4843 177 x 483 x 435 7.00 x 19.00 x 17.10
1756.89
1475.77
1024.00
1556.08
4
ERC6U4843 266 x 483 x 435 10.50 x 19.00 x 17.10
26410.39
2359.27
1907.50
2439.58
6
941
Networking:Wall-MountCabinets
19-in.Rack-Mount/DesktopCaseandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
FrontPanelsBlankfrontpanelprovidesameanstoclosefrontorrearofadesktopcase.Thesmoothanodizedsurfaceisidealformountingcontrolsormeters,etc.Thefrontpanelis2.5-mmthickandfitsintothe6-mm(0.24-in.)recessonfront(orrear)ofthecase.Hardwaretomountfrontpanelisfurnishedwithcase.Bulletin:DEC1
CatalogNumberDmm/in.
Hmm/in.
ERCFP3U48 120.54.74
110.04.33
ERCFP4U48 165.06.50
154.56.08
ERCFP6U48 253.89.99
243.49.58
RearPanelsRearpanelsare2.5-mmthickanodizedaluminum.Theyincludearowofventilationslots(vertical)alongtheupperedgeofpanel.6Ucovershavetworowsofslots.Hardwaretomountrearpanelisfurnishedwithcase.Bulletin:DEC1
CatalogNumberDmm/in.
Hmm/in.
Jmm/in.
ERCRP3U48 1214.74
1104.33
25.98
ERCRP4U48 1656.50
1556.08
25.98
ERCRP6U48 2549.99
2439.58
25.98
FrontHandlesHandlesfacilitatemovementofthedesktopcaseandinstallationofthecaseina19-in.rack.Theyaremountedtotherack-mountingflangesonthe19-in.frontbezel.Frontbezelshaveholespartiallydrilledandcountersunkforlocationandmustbedrilledthroughbeforehandleinstallation.Handlesaredie-castaluminumandfinishedinlight-gray(RAL7030).Packageincludestwohandleswithnecessarymountinghardware.Bulletin:DEC1
CatalogNumberERCFH3UERCFH4UERCFH6U
942
Networking:Wall-MountCabinets
19-in.Rack-Mount/DesktopCaseandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
SupportRailKitSupportrailsarerecommendedformountingandsupportingtheweightofbulkycomponentsinsideadesktopcase.Supportrailshavemountingholesandrectangularslotsformountingcomponents.Railsare1.5-mmsteelwithaplatedfinish.M4nutsareweldedtotherailendsforeasyattachmenttothecase.Mountingholesinthedesktopcasearespacedon10-mmcentersfromfronttoback,allowingavarietyofpositionsforsupportrails.Supportrailkitincludesfrontrail,rearrailandmountinghardware.Bulletin:DEC1
CatalogNumber KitIncludesERCRF48 1 front rail, 1 rear rail and mounting hardware
943
Networking:Wall-MountCabinets
19-in.Rack-Mount/DesktopCaseandAccessories
PH(763)422-2661•FX(763)422-2588•hoffmanonline.comSubjecttochangewithoutnotice ©2011PentairTechnicalProducts
Notes