spesifikasi teknis akhir-soundsystem(1)

1 SPESIFIKASI

TEKNIS

PENGADAAAN SOUND SYSTEM 2014

Spesifikasi Teknis Pengadaan Soundsystem Kantor Sekretariat DPRD Kota Tomohon

Tahun 2014

Mixer : 22-input audio mixer with an integrated USB computer audio interface (1 unit)

Premium ultralow noise, high headroom analog audio mixer

8 state-of-the-art XENYX, phantom-powered Mic Preamps comparable to stand-alone

boutique preamps

8 studio-grade compressors with super-easy "one-knob" functionality and control LED

for professional vocal and instrumental sound

Neo-classic "British" 3-band EQs for warm and musical sound

Studio-grade FX processor with 16 editable presets including reverb, chorus, flanger,

delay, pitch shifter, multi-effects, Tap function and storable user parameter settings

Built-in stereo USB/Audio Interface to connect directly to your computer. Free audio

recording, editing and podcasting software plus 150 instrument/effect plug-ins and ultra-

low latency driver included

Revolutionary energyXT2.5 Compact Behringer Edition music production software

included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all

computer platforms

Channel inserts on each mono channel for flexible connection of outboard equipment

3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for

monitoring/FX applications, 1 post fader (for internal FX or as external send)

Clip LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all

channels

2 subgroups with separate outputs for added routing flexibility

Balanced main mix outputs with gold-plated XLR connectors plus separate control room,

headphones and stereo tape outputs

Control room/phones outputs with multi-input source matrix; rec inputs assignable to

main mix or control room/phones outputs

Long-wearing 60-mm logarithmic-taper faders and sealed rotary controls

"Planet Earth" switching power supply for maximum flexibility (100 240 V), noise-free audio, superior transient response plus low power consumption for energy saving

High-quality components and exceptionally rugged construction ensure long life

Equalizer (2 unit)

Deskripsi :

Professional 31-band stereo graphic equalizer for live and studio applications

2 SPESIFIKASI

TEKNIS


Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and

can also be used as audio analyzer

Dedicated mono subwoofer output with adjustable crossover frequency

Additional sweepable high and low-cut filters for each channel remove unwanted

frequencies, e.g. floor rumble, hiss etc.

Highly accurate 12-segment LED input/output metering and input gain controls for easy

level setting

Ultra-low noise audio operational amplifiers for highest signal integrity

Relay-controlled hard-bypass with an auto-bypass function during power failure (failsafe

relay)

Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors

Shielded toroidal power transformer for ultra-low noise performance


Crossovers (1 unit) Deskripsi :

Professional stereo 2-way/mono 3-way crossover featuring state-of-the-art Linkwitz-

Riley filters with 24 dB/octave

Additional subwoofer output with independent Frequency control

Absolutely flat summed amplitude response, zero phase difference

Individual output Gain controls for all bands

Individual output Mute switches for easy band adjustment

Individual Phase reverse switches for instant phase correction

Switchable 25 Hz Low cut filter on each input for low-frequency driver protection

Servo-balanced and gold-plated XLR connectors for all inputs and outputs

Ultra-high precision potentiometers for ultimate accuracy and repeatability

Illuminated switches for secure operation in dark stage environments

Shielded toroidal mains transformer for minimal noise interference


Power Amplifier 01 (1 unit)

Product Features: 2 x 2, 000 Watts into 2 Ohms; 2 x 1, 400 Watts into 4 Ohms; 4, 000 Watts into 4 Ohms ( bridge mode) ATR ( Accelerated Transient Response) technology for ultimate punch and clarity Switchable limiters offer maximum output level with reliable overload protection Detented gain controls for precise setting and matching of sensitivity Precise Power, Signal and Clip LEDs to monitor performance XLR and 1/ 4 " TRS input connectors for compatibility with any source Professional speaker connectors and " touch-proof " binding posts support most speaker wiring systems Selectable low-frequency filters remove damaging infra-sound frequencies Independent DC and thermal overload protection on each channel automatically protects amplifier and speakers

3 SPESIFIKASI

TEKNIS


High-current toroidal transformer for ultra-high transient response and absolute reliability " Back-to-front " ventilation system including air filter for reliable operation " Built-like-a-tank, " impact-resistant, all-steel 2U rackmount chassis High-quality components and exceptionally rugged construction ensure long life

Power Amplifier 02 (2 unit)

Product Features:

2 x 1, 500 Watts into 2 Ohms; 2 x 900 Watts into 4 Ohms; 3, 000 Watts into 4 Ohms ( bridge

mode)

ATR ( Accelerated Transient Response) technology for ultimate punch and clarity

Ultra-light, ultra-low noise and ultra-efficient switch-mode power supply for noise-free audio,

superior transient response and low power consumption

Switchable limiters offer maximum output level with reliable overload protection

Detented gain controls for precise setting and matching of sensitivity

Precise Power, Signal and Clip LEDs to monitor performance

XLR , 1/ 4 " TRS and RCA input connectors for compatibility with any source

Professional speaker connectors and " touch-proof " binding posts support most speaker wiring

systems

Built-in Subwoofer/ Satellite crossover for more flexibility

Independent DC and thermal overload protection on each channel automatically protects

amplifier and speakers without shutting down the show

Back-to-front ventilation system including air filter for reliable operation " Built-like-a-tank " , impact-resistant, all-steel 2U rackmount chassis


Speaker Pasif 800 W(8 unit) Deskripsi :

High Performance Woofer: 12" (305 mm)

Tweeter Compression Driver: 1.75" (44 mm)

Frequency Range: 65 Hz to 18 kHz

Power Rating: 800 Watts Peak Power; 200 Watts Continuous (IEC 60268-5)

Impedance: 8 Ohms

Sensitivity: 95 dB (Full Space)

Dispersion: 90 x 60

Crossover Frequency: 1.9kHz

Dimensions (H x W x D): 21-2/3" x 13-5/8" x 10-5/8" (550 x 345 x 270 mm)

Weight: 24lb. (10.9kg)

High-power, 2-way PA sound reinforcement speaker system for live and playback applications

(200W continuous/800W peak power)

4 SPESIFIKASI

TEKNIS


Ultra-compact and lightweight system delivers excellent sound even at extreme sound pressure

levels

Extremely powerful 12" long-excursion driver provides incredibly deep bass and acoustic power

State-of-the-art 1-3/4" titanium-diaphragm compression driver for exceptional high-frequency

reproduction

Ultra-wide dispersion, large-format exponential horn

Overload-protection circuitry ensures optimal HF driver protection

Versatile trapezoidal enclosure design allows different positioning: Stand-mounts with 25mm

pole socket or tilts on its side for use as a floor monitor

Ergonomically shaped handles for easy carrying and setup

2 professional speaker connectors plus 1/4" jack connectors


Subwoofer (2 unit) Deskripsi :

800W/1,600W program/peak power handling @ 8 ohms Powerful long-excursion 18" bass driver Sound pressure level: 100dB (1 W @ 1 m) half space Frequency range: 40300Hz (-10dB) Neutrik Speakon connectors 21-1/2"W x 27-3/5"H x 21-3/4"D Approximately 77 lbs.

Speaker Monitor Aktif 150W, 1 pair (2 set) Deskripsi :

Ultra-linear frequency response from 50 Hz to 21 kHz with individual frequency

diagrams

Built-in 265-Watt Bi-amp module with enormous power reserve

Ultra-high resolution ferrofluid-cooled tweeter

Long-throw 8 " woofer with special polypropylene diaphragm and deformation-

resistant aluminum die-cast chassis

Controlled dispersion characteristics and extremely large sweet spot Active crossover network with 4th order Linkwitz-Riley filters

Adjustable to a wide range of acoustic conditions and subwoofer operation

Separately controlled limiter for low and high frequency overload protection

Automatic standby mode (defeatable)

Magnetic shielding allows placement near computer monitors

Servo-balanced inputs with XLR and TRS connectors High-quality components and exceptionally rugged construction ensure long life

5 SPESIFIKASI

TEKNIS


DVD Player USB (1 unit)

DVD-Video, VCD, CD CD-R/-RW DVD-R/-RW, DL/-RW (Video mode, VR mode) DVD+R/+RW, DL/+RW (Video mode) File formats: DivX, MP3, WMA and JPEG

Microphone Wireless : DUAL VOCAL, 1 pair (1 SET)

Microphone Kabel (4 unit)

Integrated microphone capsule design Lightweight, rugged construction -10 dB gain attenuation Color ID caps (available separately)

Stand Mic (6 unit)

Type : Stand Mic Boom Material : Hardened Steel Finishing : Black Painted

Bracket Speaker (12 unit)

Type : Tripod Leg Material : Hardened Steel Finishing : Black Painted

Cabeling : Kabel Speaker (1 Lot)

Kabel : Setara Antel Tembaga Murni (80yard/roll)

Connector (1 lot) Cabeling Internal (1 lot) Kabel Micropone (2 unit)

6 SPESIFIKASI

TEKNIS


Rak Audio : (1 unit)

# Dimanfaatkan untuk meletakan mixer, power, equalizer, receiver mic wireless, DVD, Crossover dan

lain-lain.

Stand Mixer And Accesories With Caster, 8 U.

7 SPESIFIKASI

TEKNIS


Mic Conference system

TERDIRI DARI:

1. POWER SUPPLY CCS-CURD ATAU CCS-CU ( 1 unit)

2. CHAIRMAN UNIT CCS-CM-ID (3 unit)

3. DELEGATE UNIT CCS-D-ID (17 unit)

4. KABEL EXTENTION ( 1 lot)

POWER SUPPLY and playback with graphical displayBuilt-in MP3 recording

Patent-pending recording buffer

Digital Acoustic Feedback Suppression

Discussion control without operator

Controls up to 150 contribution devices

Built-in monitor loudspeaker

The Control Unit ( CU) is the heart of the CCS Ultro

Discussion System and supplies the power for all delegate and chairman units in the system. The unit

also controls the chairman and delegate unit microphones, as well as

providing connections for audio inputs and outputs.

Functions: Built-in MP3 recording and playback with graphical display

The CU has a built-in recorder to digitally record a discussion to an SD Card. The graphical display shows

the status of the recorder and the accompanying buttons can be used to configure the recorder. As an

option, the recording is only active when a microphone is active. The SD card can be removed from the

CU and processed on a PC for transcription purposes; the recordings can also be retrieved by connecting

a PC to the CU' s USB. The

recordings can be played back to the monitor loudspeaker or to delegate' s loudspeakers. An audible

beep and a flashing LED indicate when the SD Card is almost full and the user needs to replace it with a

new card.

Supplies power for up to 50 contribution units

The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to

connect 25 contribution units to each trunk output, with a maximum system cable length of 100 m (

109.3 yards) .

Provides control for up to 150 contribution units

Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150

contribution units. In this configuration a single CU acts as a master controller for the entire system.

Controls and Indicators : Top

8 SPESIFIKASI

TEKNIS


Mains on/ off switch

Graphical display for status information

5 soft buttons for configuration and control of the built-in MP3 recorder

Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This

control also determines the maximum level for the headphone outputs of the contribution units and the

CU.

Microphone mode rotary switch, for setting the number of simultaneously active microphones, and

selecting one of the four operation modes ( plus test mode)

Power on LED

Technical Specifications : Electrical

Mains voltage 100 to 240 VAC 10 % , Current consumption maximum 0.9 A ( 100 VAC)

to 0.3 A ( 240 VAC)

DC supply to contribution units 24 V 1 V ( current limited)

Loudspeaker volume control mute ( 50 dB att.) + 10 steps of 1.9 dB

Limiter threshold level to unit 10 dB above nominal level loudspeaker / headphone

Gain reduction due to number of open microphones ( NOM) NOM 1 dB

Total harmonics Nominal input ( 85 dB SPL) < 0.5, Max. input ( 110 dB SPL) < 0.5

Sample frequency

Recording 32 kHz, Playback 32, 44.1, 48 kHz

Bit rate

Recording 64, 96, 128, 192, 256 KBit/ sec, Playback any bitrate

Compatible conform ID3V2 mp3-tags

Memory card Any SD Card up to 2 Gb ( high speed cards advised) , Standart SD card 1 Gb.

POWER SUPPLY Discussion control without operator

Controls up to 150 contribution devices

Built-in monitor loudspeaker

The Control Unit ( CU) is the heart of the CCS Ultro

Discussion System and supplies the power for all delegate and chairman units in the system. The unit

also controls the chairman and delegate unit microphones, as well as

providing connections for audio inputs and outputs.

Supplies power for up to 50 contribution units

The CU has two trunk outputs for the loop-through connection of contribution units. It is possible to

connect 25 contribution units to each trunk output, with a maximum system cable length of 100 m (

109.3 yards) .

9 SPESIFIKASI

TEKNIS


Provides control for up to 150 contribution units

Up to 3 CUs can be used together in a discussion system to power and control a maximum of 150

contribution units. In this configuration a single CU acts as a master controller for the entire system.

Controls and Indicators : Top

Mains on/ off switch

Loudspeaker volume control, for setting output level of loudspeakers of contribution units. This

control also determines the maximum level for the headphone outputs of the contribution units and the

CU.

Microphone mode rotary switch, for setting the number of simultaneously active microphones, and

selecting one of the four operation modes ( plus test mode)

Power on LED

Technical Specifications : Electrical

Mains voltage 100 to 240 VAC 10 % , Current consumption maximum 0.9 A ( 100 VAC)

to 0.3 A ( 240 VAC)

DC supply to contribution units 24 V 1 V ( current limited)

Loudspeaker volume control mute ( 50 dB att.) + 10 steps of 1.9 dB

Limiter threshold level to unit 10 dB above nominal level loudspeaker / headphone

Gain reduction due to number of open microphones ( NOM) NOM 1 dB

Total harmonics Nominal input ( 85 dB SPL) < 0.5, Max. input ( 110 dB SPL) < 0.5

Mic.CHAIRMAN: 3 unit

Incorporates all functions of the CCS D-ID CCS Delegate Units ( with the exception of the Possible

To Speak functionality/ LED)

Priority button for chairman microphone

Temporary or permanent muting of delegate microphones

Optional chime tone facility for preceding chairman announcements

Modern, unobtrusive styling to match the CCS D-ID CCS Delegate Units

Available with standard or extended length microphone stems

The CCS CM-ID CCS Chairman Units are equipped withenhanced functionality that enables the

user to take the roleof chairman in a conference or meeting.

Functions: Priority button for chairman microphone In addition to the microphone on' button

the chairman units feature a chairman priority' button. When pressed the priority button

causes all currently active delegate microphones to be temporarily or permanently muted.

10 SPESIFIKASI

TEKNIS


Temporary or permanent muting of delegate microphones. The chairman priority' button can

be set to mute delegate microphones on a temporary or permanent basis. On the

temporary setting, delegate microphones are muted only as-long as the chairman has the

priority button pressed down. On the permanent setting delegates must reactivate their

microphone after a chairman priority' announcement by pressing the microphone on' button

on their delegate unit. Activation of the permanent mute option is carried out by setting an

internal switch, which can be accessed by removing a small plastic plate on the base of the

chairman unit.

Optional chime tone facility for preceding chairman announcements. An optional chime tone

can be selected to precede chairman priority calls. Activate the chime tone option by setting an

internal switch; this can be accessed by removing a small plastic plate on the base of the

chairman unit.

Standard or extended length microphone stems. The chairman units are available with standard

313 mm ( 12.3 in) .

Controls and Indicators.

Microphone on/ off button

Chairman priority button

Rotary volume control for adjusting headphone volume

Loudspeaker, automatically muted when microphone is on and/ or headphones are

connected

Internal switch for selection of chairman announcement chime tone

Internal switch for temporary or permanent muting of delegate microphones when chairman

priority button is pressed

Microphone has on' indicator ( red LED)

Light ring indicator on microphone stem, lights up red when microphone is on

No Possible-To- Speak functionality and indicator is required because a Chairman Unit can

always switch-on the microphone, no matter the number of delegates speaking.

Interconnections:

1 x 2 m ( 78.7 in) cable terminated with a molded 7-pole circular male connector, for loop-

through interconnection to delegate unit or Control Unit

1 x 7-pole circular female connector for loop-through interconnection to delegate units

2 x 3.5 mm ( 0.14 in) stereo headphone sockets.

Technical Specifications: Mechanical

Dimensions unit without microphone ( H x W x D) 71 x 220 x 140 mm ( 2.8 x 8.7 x 5.5 in)

Height with microphone in horizontal position 134 mm ( 5.3 in) Length of microphone from

mounting surface CSS CM-ID 313 mm ( 12.3 in)

Weight approx. 1 kg ( 2.2 lb) Mounting tabletop ( portable or fixed)

Material ( top) polymer Material ( base) painted metal

Color ( base) charcoal ( PH10736) Color ( top) charcoal ( PH10736)

11 SPESIFIKASI

TEKNIS


Mic. DELEGATE: 17 unit

- Unique, patent pending " Possible To Speak " indicator

- Compact, attractive design

- Built-in volume control for headphones

- Microphone with flexible stem and light ring

- Two headphone sockets

- Available with standard or extended length microphone stems

The CCS Dx CCS Delegate Units enable delegates to actively take part in the proceedings. A built-

in microphone allows them to speak to the other delegates, and they can listen to the

discussion using the built-in loudspeaker or ( optional) personal headphones.

Functions

Possible To Speak

A so called Possible-To-Speak' indicator is build-in showing if it is possible to switch on the

microphone. This functionality is shown by a white LED combined with the microphone on'

indicator.

Microphone with flexible stem and light ring

The microphone is mounted on a flexible stem, which is easily adjustable to suit personal

preferences. It also allows two people to use the same delegate unit as they can pull the

microphone towards them when required to speak. Incorporated into the head of the

microphone is a light ring which illuminates red to indicate when the microphone is on.

Built- in loudspeaker

Loudspeaker volume is set centrally at the Control Unit for all delegate units. To prevent

acoustic feedback, the built- in loudspeaker is automatically muted when the microphone

is on.

Two headphone sockets

Two 3.5 mm ( 0.14 in) stereo headphone sockets ( wired for mono) allow two pairs of

headphones to be connected so two delegates can simultaneously use the unit. It is also

possible to connect a tape recorder to one headphone socket, and use the other headphone

socket to listen to the proceedings.

Built-in volume control for headphones

The headphone volume level can be adjusted by means of a thumbwheel on the unit for

maximum comfort.

Compact, attractive design

Featuring modern, unobtrusive styling and finished in charcoal gray these units make a valuable

addition to any venue.

Standard or Extended Length Microphone Stems

The delegate units are available with standard 313 mm ( 12.3 inch) .

12 SPESIFIKASI

TEKNIS


Controls and Indicators

Microphone on/ off button

Rotary volume control for adjusting headphone volume

Loudspeaker, automatically muted when microphone is on and/ or headphones are

connected

Possible :Speak indicator ( white LED)

Microphone on' indicator ( red LED)

Light ring indicator on microphone stem, lights up red when microphone is on.

Interconnections

1 x 2 m ( 78.7 in) cable terminated with a pole maleconnector for loop-through connection to

other delegate or chairman units, or to a Control Unit

1 x 7 pole circular female connector for loop-through connection to other delegate or

chairman units

2 x 3.5 mm ( 0.14 in) stereo headphone sockets

Technical Specifications : Mechanical

Dimensions unit without microphone ( H x W x D) 71 x 220 x 140 mm ( 2.8 x 8.7 x 5.5 in)

Height with microphone in horizontal position 134 mm ( 5.3 in) Length of microphone from

mounting surface CCS D-ID 313 mm

Weight approx. 1 kg ( 2.2 lb) Mounting tabletop ( portable or fixed) Material ( top) polymer

Material ( base) painted metal Color ( top) charcoal ( PH10736) Color ( base) charcoal (

PH10736)

KABEL EXTENSION CUSTOM UNTUK INSTALASI MIC CONFERENCE.

Setara :

KABEL WARNA HITAM

DILENGKAPI DENGAN JACK 7 PIN WARNA HITAM

TERSEDIA BERBAGAI UKURAN YAITU:

PANJANG 20 METER

PANJANG 10 METER

PANJANG 5 METER

PANJANG 3 METER

PANJANG 2 METER

spesifikasi teknis akhir-soundsystem(1)

Documents

input audio mixer

noisefree audio

main mix outputs

separate outputs

audio analyzer

professional stereo

free audio recording

low power consumption