FUSION SPLICERS A Furukawa Company

Splice-On Connector Termination SystemSplice-On Connector Termination SystemSplice-On Connector Termination SystemSplice-On Connector Termination SystemSplice-On Connector Termination SystemSplice-On Connector Termination SystemSplice-On Connector Termination SystemSplice-On Connector Termination System

FITEL’s new connector termination system allows for unsur-FITEL’s new connector termination system allows for unsur-passed performance and fl exibility in the fi eld.

This new “splice-on” connector (SOC) eliminates the need for This new “splice-on” connector (SOC) eliminates the need for This new “splice-on” connector (SOC) eliminates the need for This new “splice-on” connector (SOC) eliminates the need for fi eld polishing and signifi cantly improves the quality of the ter-fi eld polishing and signifi cantly improves the quality of the ter-fi eld polishing and signifi cantly improves the quality of the ter-fi eld polishing and signifi cantly improves the quality of the ter-mination and installation time required.

FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are FITEL’s factory polished ferrules with pre-cleaved fi ber stubs are spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule spliced onto the fi eld fi ber utilizing FITEL’s proprietary ferrule holder and fusion splicer. The connector is easily assembled holder and fusion splicer. The connector is easily assembled holder and fusion splicer. The connector is easily assembled holder and fusion splicer. The connector is easily assembled by using a process that requires minimal skill or training. These by using a process that requires minimal skill or training. These by using a process that requires minimal skill or training. These by using a process that requires minimal skill or training. These connectors are optimal for use in data center applications.connectors are optimal for use in data center applications.• Both single-mode and multimode versions are available

Features and Applications• Simple, Fast, & Consistent Field Termination – Allows for easy fi eld

repair of pre-terminated splitters, fan outs, and drop terminals

• No Polishing or Epoxy – FITEL’s connector termination process requires no polishing or epoxy increasing the quality and consistency of fi eld con-nector termination. Total installation time is greatly reduced compared to traditional methods

• Fiber Management – The most diffi cult task for splicer operators has always been managing the fi ber upon completion of splicing. The connec-tor termination feature of the S123C, S153A and S178A Fusion Splicers eliminates the need for splice trays resulting in easier fi ber management, reduced storage requirements, and faster installation times

SOC Connectors

SpecificationsParameter Description

Type SC, LC, FC & STAvailable in these connector types for both single-mode and multimode

Insertion Loss Typical 0.5 dB

Nominal Fiber OD 125 µmNominal Fiber Coatingor Fan-Out Tubing OD

900 µm

Materials Ferrule: Composite or ceramic

Housing Composite

Refl ectance -55 dB (+18° to +26°C)

Jacket Type 900 µm, 2 mm, 3 mm

S325 Cleaver

S123C FusionS123C FusionS123C FusionSplicer

RoHS

Single-Mode Connector Ordering Information*Description Part Number Unit of MeasureSMF FC/APC 900 µm FIT-FCAPCSOC Box of 6 connectors

SMF FC/UPC 900 µm FIT-FCUPCSOC Box of 6 connectors

SMF LC/APC 900 µm FIT-LCAPCSOC Box of 6 connectors

SMF LC/UPC 900 µm FIT-LCUPCSOC Box of 6 connectors

SMF SC/APC 900 µm FIT-SCAPCSOC Box of 6 connectors

SMF SC/UPC 900 µm FIT-SCUPCSOC Box of 6 connectors

SMF ST/UPC 900 µm FIT-STUPCSOC ** Box of 6 connectors

FC/UPC Splice on connector 2 mm SAPS-356-EUA One Each

FC/UPC Splice on connector 3 mm SAPS-357-EUA One Each

FC/UPC Splice on connector 900 SAPS-358-EUA One Each

FC/APC Splice on connector 2 mm SAPS-386-EUA One Each

FC/APC Splice on connector 3 mm SAPS-387-EUA One Each

FC/APC Splice on connector 900 SAPS-388-EUA One Each

SC/UPC Splice on connector 900 SSCS-P1-EUA One Each

SC/UPC Splice on connector 2 mm SSCS-P2-EUA One Each

SC/UPC Splice on connector 3 mm SSCS-P3-EUA One Each

SC/UPC Splice on connector 4.8 SSCS-P5-EUA One Each

SC/APC Splice on connector 900 SSCS-PN1-EUA One Each

SC/APC Splice on connector 2 mm SSCS-PN2-EUA One Each

SC/APC Splice on connector 3 mm SSCS-PN3-EUA One Each

SC/APC Splice on connector 4.8 SSCS-PN5-EUA One Each

LC/UPC 900 µm, Flexible Boot SLCS-P1U One Each

LC/UPC 900 µm, Silicon Boot SLCS-P1UA One Each

LC/UPC 2 mm, Long Flexible Boot SLCS-P2EUA One Each

LC/APC 900 µm Flexible Boot SLCS-PN1U One Each

LC/APC 900 µm Silicon Boot SLCS-PN1UA One Each

LC/APC 2 mm Long Flexible Boot SLCS-PN2EUA One Each

* MOQ of 30 SOCs per order. Can be combined with other SOCs** ST Splice on Connectors may require use of external heat oven FIT-SOCOVEN

SOC Fiber Holder InformationFor FITEL Fusion Splicers S178, S153, S123C/MDescription Connector Type Part #

Ferrule Holder

900 µm, 2 and 3 mm FC, SC S712C-SGS5-L

900 µm, 2 and 3 mm LC S712C-SGL5-L

FIT SOC: FC, SC, LC, ST S712C-FITSOC

Cordage Holder 2 mm, 3 mm FC, SC, LC S712C-SGC5-R

Fiber Holder 900 µm FC, SC, LC, ST S712S-900

Multimode Connector Ordering Information*Description Part Number Unit of MeasureMMF FC/UPC 900 µm (50/125) FIT-FC50SOC Box of 6 Connectors

MMF FC/UPC 900 µm (62.5/125) FIT-FC62SOC Box of 6 Connectors

MMF FC/UPC 900 µm (OM3, Laser Optimized) FIT-FCOM3SOC Box of 6 Connectors

MMF LC/UPC 900 µm (50/125) FIT-LC50SOC Box of 6 Connectors

MMF LC/UPC 900 µm (62.5/125) FIT-LC62SOC Box of 6 Connectors

MMF LC/UPC 900 µm (OM3, Laser Optimized) FIT-LCOM3SOC Box of 6 Connectors

MMF SC/UPC 900 µm (50/125) FIT-SC50SOC Box of 6 Connectors

MMF SC/UPC 900 µm (62.5/125) FIT-SC62SOC Box of 6 Connectors

MMF SC/UPC 900 µm (OM3, Laser Optimized) FIT-SCOM3SOC Box of 6 Connectors

MMF ST/UPC 900 µm (50/125) FIT-ST50SOC ** Box of 6 Connectors

MMF ST/UPC 900 µm (62.5/125) FIT-ST62SOC ** Box of 6 Connectors

MMF ST/UPC 900 µm (OM3, Laser Optimized) FIT-STOM3SOC ** Box of 6 Connectors

MMF SC/UPC 900 µm (50/125) Long Flexible Boot SSCS-P1M1 One Each

MMF SC/UPC 900 µm (50/125) Short Silicon Boot SSCS-P1M1-EA One Each

MMF SC/UPC 900 µm (62.5/125) SSCS-P1M2-EA One Each

MMF SC/UPC 900 µm (OM3, Laser Optimized) SSCS-P1M3-EA One Each

MMF SC/UPC 2 mm (50/125) SSCS-P2M1-EA One Each

MMF SC/UPC 2 mm (62.5/125) SSCS-P2M2-EA One Each

MMF SC/UPC 2 mm (OM3, Laser Optimized) SSCS-P2M3-EA One Each

MMF SC/UPC 3 mm (50/125) SSCS-P3M1-EA One Each

MMF SC/UPC 3 mm (62.5/125) SSCS-P3M2-EA One Each

MMF SC/UPC 3 mm (OM3, Laser Optimized) SSCS-P3M3-EA One Each

MMF LC/UPC 900 µm (50/125) Flexible Boot SLCS-P1M1U One Each

MMF LC/UPC 900 µm (50/125) Silicon Boot SLCS-P1M1UA One Each

MMF LC/UPC 900 µm (62.5/125) Flexible Boot SLCS-P1M2U One Each

MMF LC/UPC 900 µm (62.5/125) Silicon Boot SLCS-P1M2UA One Each

MMF LC/UPC 900 µm (OM3, Laser Optimized) Flex Boot SLCS-P1M3U One Each

MMF LC/UPC 900 µm (OM3, Laser Optimized) Silicon SLCS-P1M3UA One Each

MMF LC/UPC 2 mm (50/125) Long Flexible Boot SLCS-P2M1EUA One Each

MMF LC/UPC 2 mm (62.5/125) Long Flexible Boot SLCS-P2M2EUA One Each

MMF LC/UPC 2 mm (OM3, Laser Optimized) Long Flex Boot SLCS-P2M3EUA One Each

* MOQ of 30 SOCs per order. Can be combined with other SOCs** ST Splice on Connectors may require use of external heat oven FIT-SOCOVEN

900 µm Construction

2 & 3 mm Construction

A Furukawa Company

Contact Us:

Fusion Splicer Customer Service,Training and Service Center Toll Free: 866-452-9516Phone: 678-783-1090Fax: 678-783-1093Email: splicers@ofsoptics.com

OFS Corporate Headquarters2000 Northeast ExpresswayNorcross, Georgia 30071, USAToll Free: 888-Fiber-HelpIntl. Phone: 770-798-5555Email: ofs@ofsoptics.com

For additional information please contact your sales repre-sentative. You can also visit our website at:

http://www.ofsoptics.com.

OFS reserves the right to make changes to the prices and product(s) described in this document at any time without notice.

This document is for informational purposes only and is not intended to modify or supplement any OFS warranties or specifi cations relating to any of its products or services.

Copyright © 2011 OFS FITEL, LLC.All rights reserved, printed in USA.

OFSMarketing CommunicationsFITEL-SOC-SM-MM-1011

Use electronic fi les, available at:www.ofsoptics.com - Use less paper

This logo mark indicates that the products and services satisfy the standards of environ-mentally friendly products of the Furukawa Electric Group.

eFriendly Logo MarkOur company has confi gured the environmental management sys-tem at each of our plants world-wide, and acquired ISO 14001 certifi cation.

ISO 14001

EZ-Bend is a registered trademark of OFS FITEL, LLC.FITEL is a registered trademark of Furukawa Denki Kogyo Kabushiki Kaisha DBA The Furukawa Electric Co., Ltd Corporation.

Available Splicer InformationType ModelCore Alignment Machine S178A

Active Clad Align Machine S153A

Clad Alignment Machine S123C

S153 FusionS153 FusionSplicer

RoHS

RoHSRoHS

S178 FusionS178 FusionSplicer

S123M12 FusionS123M12 FusionS123M12 FusionSplicerSplicerSplicer

RoHS

Additional AccessoriesDescription Part NumberExternal heat oven for ST FIT- SOC FIT-SOCOVEN

Crimp Tool CRP-01

Crimp Tool 4.8 mm CRP-4.8

Connector Assembling Tool S240A

Splicer Scissors/ Kevlar Shear SS-01

Soft Carrying Case for SOC Kit SOC CASE

Tube Splitter 4.8 mm TUBE SPLITT

Tube Splitter 2.3 mm TUBESP 2.3

Tube Splitter 2.8 mm TUBESP 2.8