spool feedback sensor - hprs - coroflot
TRANSCRIPT
WWW.SERVI.NO
Spool feedback sensor (LVDT) with integrated electronics.
Developed for use together with hydraulic proportional valves. The output signal can be used as monitoring or in a closed loop control of the spool position.
Hysteresis, repeatability, response time are significant improved with HPRS.
For use on HAWE PSV/L(F) and Servi Hydranor valve HSV600.
Adjustable zeropoint and gain.
HYSTERESIS, REPEATABILITY, RESPONSTIME ARE ALL SIGNIFICANT IMPROVED WITH HPRS
DESCRIPTION DATA
Comunication, output 4-20 mA
Supply Voltage 24 VDC
Spool stroke (adjustable) max 10,4 mm
Protection Clas IP67
Ambient temperature -40oC-70oC
Atex/IECEx approved II 2G Ex d IlB T6 Gb
P5030-A1-2015
SERVI [email protected] www.servicatalogue.com
SPOOL FEEDBACK SENSOR - HPRS
+-
with ATEX and IECEx approval
1PAGE
SERVI [email protected] www.servicatalogue.com
D4020-A1-2015
SERVI GAS BOTTLES SERVI o�er a range of gas bottles to complement our accumulator range. There are a wide range of standard size gas bottles available at various pressure ratings. SERVI also provide custom gas bottles to suit any capacity or pressure requirements.
PRESSURE RATING (BAR)
PED 360 360
Volume (Litres) 50 75
L - Overall Length 1722 2520
S - Shell Outer Diameter 220 220
Gas Nitrogen Nitrogen
Material 34CrMo4 34CrMo4
Mass (kg) 93,5 135
Description B52 B75
Servi part number 743823 696999
Paint Options Standard - Degrease and primer Optional - Norsok M-501, system 1
DUAL PORTS
DUAL PORT FLAT BOTTOM MACHINED
1PAGE
SERVI [email protected] www.servicatalogue.com
D4010-A1-2015
PISTON ACCUMULATOR TYPE PAC/PAS
• PAC - Carbon Steel (CS) PACX - ATEX • PAS - Stainless Steel (SS) PASX - ATEX
TABLE OF CONTENTS 1. Features 2 2. Function 2 3. Technical data 3 4. Dimensions/weight - Carbon Steel - 250 bar 4 4. Dimensions/weight - Carbon Steel - 350 bar 5 4. Dimensions/weight - Stainless Steel - 242-250 bar 6 4. Dimensions/weight - Stainless Steel - 242-350 bar 7 5. Model Code 8 6. Materials 9 7. Installation 9 8. Maintenance 10 9. Storage 10 10. Spare parts 11
WWW.SERVI.NO
Max flow 600 l/min [160 gpm] per working section Pressure compensator system for load indepen-
dent control of hydraulic actuator
Load sensing of each individual working section
Individual pressure limiter in A and B Actuation
- Proportional electric operation - Manual - Hydraulic remote - Combination of those above
Options - Inlet section for variable/fixed pump - Working section with spool position sensor LVDT - Prepared in combination with HAWE SLF5 valves for flow up to 200 lpm - Directional spool with open or closed A-B to T - Directional spool with option meter in/out throttling - Available with Ex proportional solenoid valves
DESCRIPTION DATA
Flow ranges Inlet section 1000 l/min (265 gpm)
Working section 600 l/min (160 gpm)
Weight Inlet 34 kg (75 lb)
Working section 45 kg (99 lb)
Adapter/end plate 34 kg (75 lb)
HAWE section 4.5 kg (10 lb)
End plate HAWE 2.2 kg (5 lb)
Max pressure P, A, B 350 bar (5100 psi)
T 10 bar (145 psi)
D 10 bar (145 psi)
Pilot pressure 5-19 bar (73-276 psi)
Test pressure 420 bar (6100 psi)
Fluid temperature range -20oC to +70oC
Ambient temperature range -20oC to +50oC
P3010-A1-2015
SERVI [email protected] www.servicatalogue.com
PROPORTIONAL MODULAR VALVE - HSV600 for flow up to 600
Pressure compensated section valve