sport-profi-hunting nylon holsters and accessories · terial based on polyamide fibrous of...
TRANSCRIPT
DASTASINCE 1991KATALOG 2010
®
Distributor
© L
D s
tudi
o U
hers
ký O
stro
h -
desi
gn,
tel.:
+ 42
0 77
7 75
0 15
9
USV
www.dasta.cz
nylon holsters and accessoriessport-profi-hunting
®
Nylon HolstersDuty Equipment
Hunting Accessories
DASTA s.r.o.Ke Klí�ovu 714/6, 190 00 Praha 9, Czech Republic
Tel.: + 420 2 83880439 Fax: + 420 2 86583402e-mail: [email protected], www.dasta.cz
export department: Tel.: + 420 2 51621768 Fax: + 420 2 51611969
e-mail: [email protected]
Notice for the usersDASTA products are made with the use of high techno-logy and long-term knowledge in this area with following development trends not only in Europe but also in the world. Technical level and the usability of arm holsters, accoutrements, and accessories used in arm forces, ful-fill the requirements for duty accessory.Material and production technologyDASTA products are made from nylon water-repellent material having high resistance against chafing. Hols-ters for handguns are produced using “trilaminate” or “sandwich“ technology. The “Trilaminate” is a double-side laminated foam epithelium “POLYFOAM” with upper ma-terial based on polyamide fibrous of “Cordura” type, and with inner material on a micro-velour basis. POLYFOAM is a foam epithelium with closed cell structure not ab-sorbing water.Sandwich is material with individual plies where the foam epithelium is replaced by the form permanent material with high density polyethylene PE 950 or PE 750 in dif-ferent thickness and rigidity level – first of all for duty holsters, or for accessories. The inner material – based ona micro-velour, is usually laminated with 2 mm foam ply. Majority of material used for production has the ISO 9002 Certificate for quality check.Treatment and products serviceProducts dont need any special treatment. Heavy dirty can be removed by brush and rubber wet out in com-mon detergent. Holster can be then left to become dry in a temperature around 40 oC. Dirty Velcro fastener or the damaged press rivet closures can be removed. By duty holsters, where the removable screw caps are used, it is necessary to check on regular basis their firmness.Assembling of arm holsters and accessoriesDASTA products create complete collection and it allows to put together any duty belt or shoulder set according to the need. Shoulder set can contain vertical, horizon-tal, combined, or break-out shoulder holster and particu-lar balance weights, or plastic standard or multi-function balance weight. Shoulder sets can be completed as one--side or both-sides sets with cross hinge KZ 40 or KZ 30 (width of belt in mm), with two one-shoulder belts or with net hinge. Combined shoulder holsters (and even belt holsters) and break-out holsters are for one side only.Order number and the system of products markingOrder number (sometimes accompanied by capital let-ter) mentioned on identification product label in PET pa-ckage, is composed of the following:• three places number - producers number marking basic model• number behind dash - modification of basic model – for gun holster means type of gun; for accessories it means different models or their size in one set (e.g. hand-cuffs holster, etc.);• letters after slash mean the following:“O” – both-sides holster“KZ 30” cross hinge and its width in mm“KZ 40” cross hinge and its width in mm“SZ” net hinge for both shoulders“TZ” tactical hinge“TZ-A” tactical hinge + narrow cover holster lappet
“TZ-B” tactical hinge + bride cover holster lappet“S” steel clip“V” Velcro fastener“P” POLICE“SC” SECURITY“p” accessory UTONUInnovation and new productsContinuous replacement of the used foam epithelium through new foam epithelium POLYFOAM 5050 having lower level of frothing, it brings higher firmness and sha-pe stability of nylon holsters. Replacement of press rivet knobs through products from abroad, having guarante-ed press firmness at least 4kp, improves the security for holster use. Increased use of “sandwich” technolo-gy brings higher firmness and resistance first of all for accoutrement and accessories for professional armed units. It allows also creation of new models for whole-co-ver holsters of the PREMIUM line connecting good cha-racteristic of leather and nylon arm holsters. In recent years we have strived hard to bring in some innovations and DASTA-LOCK casing improvement with an automa-tic safety locking system which is a Czech copy-right pro-tected utility design No. 14038 to have been registe-red in 2003. The redesigned DASTA-LOCK system is an elementary platform to the initial Czech plastic casings with a uniformed profile shell and brand new and original properties designated PLASTIC HOLSTER DASTA-LOCK which had been presented in 2006 for the first time.Total new for 2010 is the U S V – Universal frameless tie basic bearing element for a support systém of brand new design and properties. CZ pat. PUV 2009-21598.
Information for the usersAll firearms if improperly and carelessly handled are po-tentially dangerous to life and health.Before the use of the gun and the holster, we recom-mend to read these safety precautions carefully and ob-serve the rules herein contained:1. Use only the holster designed by the producer for the
particular gun model (per designation on the label).2. Use the holster in the way as recommended by the
producer (as belt, shoulder or concealed holster). Concealed holsters are designed to be carried inside--the-pants in such a way that the clip of the holster catches the belt.
3. Try every new holster and by holstering take care that it goes smoothly and it doesn‘t come to any unwanted or inadvertent move or shifting of any part of the gun (hammer, slide, etc.).
4. Don‘t carry the gun in the holster with round in the chamber.
5. Always keep your finger OFF the trigger when drawing and holstering.
6. NEVER HOLSTER A COCKED HANDGUN.7. Make the fastening of the holster by setting the VEL-
CRO strap in an individual way according to the need (according to gun type) in such a way that the gun is firmly holstered in a secure way and protected aga-inst accidental loss.Riveted snap fasteners must be closed in a parallel way against each other (on the side closure but not on its back side).
8. Exchange any damaged riveted snap fasteners or Velcro straps if necessary.
9. Use securing strap with holsters having dual retention.
DASTASINCE 1991KATALOG 2010
®
Distributor
© L
D s
tudi
o U
hers
ký O
stro
h -
desi
gn,
tel.:
+ 42
0 77
7 75
0 15
9
USV
www.dasta.cz
nylon holsters and accessoriessport-profi-hunting
®
Nylon HolstersDuty Equipment
Hunting Accessories
DASTA s.r.o.Ke Klí�ovu 714/6, 190 00 Praha 9, Czech Republic
Tel.: + 420 2 83880439 Fax: + 420 2 86583402e-mail: [email protected], www.dasta.cz
export department: Tel.: + 420 2 51621768 Fax: + 420 2 51611969
e-mail: [email protected]
Notice for the usersDASTA products are made with the use of high techno-logy and long-term knowledge in this area with following development trends not only in Europe but also in the world. Technical level and the usability of arm holsters, accoutrements, and accessories used in arm forces, ful-fill the requirements for duty accessory.Material and production technologyDASTA products are made from nylon water-repellent material having high resistance against chafing. Hols-ters for handguns are produced using “trilaminate” or “sandwich“ technology. The “Trilaminate” is a double-side laminated foam epithelium “POLYFOAM” with upper ma-terial based on polyamide fibrous of “Cordura” type, and with inner material on a micro-velour basis. POLYFOAM is a foam epithelium with closed cell structure not ab-sorbing water.Sandwich is material with individual plies where the foam epithelium is replaced by the form permanent material with high density polyethylene PE 950 or PE 750 in dif-ferent thickness and rigidity level – first of all for duty holsters, or for accessories. The inner material – based ona micro-velour, is usually laminated with 2 mm foam ply. Majority of material used for production has the ISO 9002 Certificate for quality check.Treatment and products serviceProducts dont need any special treatment. Heavy dirty can be removed by brush and rubber wet out in com-mon detergent. Holster can be then left to become dry in a temperature around 40 oC. Dirty Velcro fastener or the damaged press rivet closures can be removed. By duty holsters, where the removable screw caps are used, it is necessary to check on regular basis their firmness.Assembling of arm holsters and accessoriesDASTA products create complete collection and it allows to put together any duty belt or shoulder set according to the need. Shoulder set can contain vertical, horizon-tal, combined, or break-out shoulder holster and particu-lar balance weights, or plastic standard or multi-function balance weight. Shoulder sets can be completed as one--side or both-sides sets with cross hinge KZ 40 or KZ 30 (width of belt in mm), with two one-shoulder belts or with net hinge. Combined shoulder holsters (and even belt holsters) and break-out holsters are for one side only.Order number and the system of products markingOrder number (sometimes accompanied by capital let-ter) mentioned on identification product label in PET pa-ckage, is composed of the following:• three places number - producers number marking basic model• number behind dash - modification of basic model – for gun holster means type of gun; for accessories it means different models or their size in one set (e.g. hand-cuffs holster, etc.);• letters after slash mean the following:“O” – both-sides holster“KZ 30” cross hinge and its width in mm“KZ 40” cross hinge and its width in mm“SZ” net hinge for both shoulders“TZ” tactical hinge“TZ-A” tactical hinge + narrow cover holster lappet
“TZ-B” tactical hinge + bride cover holster lappet“S” steel clip“V” Velcro fastener“P” POLICE“SC” SECURITY“p” accessory UTONUInnovation and new productsContinuous replacement of the used foam epithelium through new foam epithelium POLYFOAM 5050 having lower level of frothing, it brings higher firmness and sha-pe stability of nylon holsters. Replacement of press rivet knobs through products from abroad, having guarante-ed press firmness at least 4kp, improves the security for holster use. Increased use of “sandwich” technolo-gy brings higher firmness and resistance first of all for accoutrement and accessories for professional armed units. It allows also creation of new models for whole-co-ver holsters of the PREMIUM line connecting good cha-racteristic of leather and nylon arm holsters. In recent years we have strived hard to bring in some innovations and DASTA-LOCK casing improvement with an automa-tic safety locking system which is a Czech copy-right pro-tected utility design No. 14038 to have been registe-red in 2003. The redesigned DASTA-LOCK system is an elementary platform to the initial Czech plastic casings with a uniformed profile shell and brand new and original properties designated PLASTIC HOLSTER DASTA-LOCK which had been presented in 2006 for the first time.Total new for 2010 is the U S V – Universal frameless tie basic bearing element for a support systém of brand new design and properties. CZ pat. PUV 2009-21598.
Information for the usersAll firearms if improperly and carelessly handled are po-tentially dangerous to life and health.Before the use of the gun and the holster, we recom-mend to read these safety precautions carefully and ob-serve the rules herein contained:1. Use only the holster designed by the producer for the
particular gun model (per designation on the label).2. Use the holster in the way as recommended by the
producer (as belt, shoulder or concealed holster). Concealed holsters are designed to be carried inside--the-pants in such a way that the clip of the holster catches the belt.
3. Try every new holster and by holstering take care that it goes smoothly and it doesn‘t come to any unwanted or inadvertent move or shifting of any part of the gun (hammer, slide, etc.).
4. Don‘t carry the gun in the holster with round in the chamber.
5. Always keep your finger OFF the trigger when drawing and holstering.
6. NEVER HOLSTER A COCKED HANDGUN.7. Make the fastening of the holster by setting the VEL-
CRO strap in an individual way according to the need (according to gun type) in such a way that the gun is firmly holstered in a secure way and protected aga-inst accidental loss.Riveted snap fasteners must be closed in a parallel way against each other (on the side closure but not on its back side).
8. Exchange any damaged riveted snap fasteners or Velcro straps if necessary.
9. Use securing strap with holsters having dual retention.
3
Sp
or
tP
ro
fiL
ov
Be l t Ho ls t er s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 -10
One-Side Ambidextrous Moulded Concealment
Shou lder Ho ls t er s . . . . . . . . . . . . . . . . . . . . . . .11 -15
Balance Weights Vertical Thumb-Break Horizontal Combinet
Specialty Accessory Cases.. . . . . . . . . .16-17
Transport Cases Purse / Etui
Duty Holsters......................................................18-29
Pistol holsters with laser and light Holsters with Auto Security System Belt holsters Tactical holsters Military holsters Tactical slings
Duty Accessories.............................................26-30
Mace/pepper spray holders Key ring holders Baton holder Magazine pouches Handcuffs pouches Radio and flashlight pouches Duty cases for documents Earrings pouches Duty belts
Duty Outfit and Accessories...... . . .36-38
Tactical Bag for Protective Mask Shooting Case Tactical Vests
Hunting Accessories.........................................39-42
Shooters Vest Gun Maintenance Kit, Ammo Cases Hunting Ammunition Belts Hunting Guns Transport Cases Rifle Slings
TA B L E O F C O N T E N T S
4
DASTA®
sport
nylon holsters and accessoriessport-profi-hunting
®
NEW
design
2010
5
mod. 263
mod. 207
mod. 204
mod. 264
mod. 626
mod. 293
mod. 205
mod. 264-1
mod. 622
Sp
or
t
207 Pi Walther PPK263 Pi CZ 45/92263/S with steel clip
Belt Side Holsters Simple and practical belt holsters for pistols and revolvers Produced with loop for the belt that is a part of the holster's shell, or with a belt loop (Mod.204, 205), or with steel clip (Models marked by the letter S)
One-piece or two-piece closure with riveted snap fastener adjustable in length using VELCRO strips
Belt Side Holsters
B E LT H O L S T E R S
293 2” revolver 293/S with steel clip
205-1 Pi BERETTA 92, GLOCK 17SIG P-226, Pi CZ 75/85Colt M1911, BROWNING GP DA9
205-1/S with steel clip
204-1 Pi CZ 50/70, Walther PP/PPK204-1/S with steel clip204-2 Pi CZ 82/83, Makarov204-2/S with steel clip
264-1 3” revolver264-1/S with steel clip
626 revolver 6”
622 KEVIN622/S with steel
clip
264 4” revolver 264/S with steel clip
66
mod. 201
mod. 202
mod. 202/Z
mod. 203mod. 203/Z
mod. 201/Z
202-1/Z Pi CZ 50/70, Walther PP202-2/Z CZ 82/83, MAKAROV202-3/Z CZ 75/85, CZ 75 D Compact202-5/Z Walther P 99, HK-USP, SIG P-228, CZ 100, GLOCK 19 Pi CZ G-2000,
203-1/Z Pi CZ 75/85,CZ 97 B, GLOCK 17, BERETTA 92, SIG P-226BROWNING GP DA9
Ambidextrous Belt Holsterswith Two Loops and
Intergrated Magazine Pouch
B E LT H O L S T E R S
Ambidextrous Belt Holsters Two Loops
Ambidextrous Belt Holsters - 2 Loops Very popular belt holsters comfortable to use with either hand Two belt loops provide maximum stability on the belt Three sizes - small (201), medium (202), and large (203) - each of them delivered to fit several types of handguns
Provide very secure fitting and carrying of the handgun Double closure with riveted snap fastener adjustable in length and size of compartment using VELCRO strips allowing if necessary handgun retaining over the grip
201-1 Pi CZ 45/92201-2 CZ 50/70, Walther PP/PPK201-3 CZ 82/83, MAKAROV201-4 CZ 75/85, CZ 75 D Compact201-5 Rev. 2 - 3"
202-1 Pi CZ 50/70, Walther PP202-2 CZ 82/83, MAKAROV202-3 CZ 75/85, CZ 75 D Compact202-4 2,5-3" revolver 202-5 Walther P 99, HK-USP,
SIG P-228, CZ 100, CZ G-2000GLOCK 17
203-1 Pi CZ 75/85, GLOCK 17, BERETTA 92SIG P-226, BROWNONG GP-DA9Colt M1911
203-2 universal – 5" pistol/4" revolver
201-6/Z CZ 2075 RAMI, GLOCK 36/39, Walther P 22, HK P7/M8
7
mod. 298
1
2
3 4
5
mod. 627mod. 296-1/Z
mod. 296/Z
mod. 296
Sp
or
t
Multivariable Belt Holster
Multivariable Belt Holster Ambidextrous, comfortable use with either hand Maximum variability of the use allowing 6 positions of holster carrying with gun on the belt (see Fig. 1)
Double-shell of the holster covers the closure Two-piece quick closure adjustable in length and site using VELCRO strips allow retaining of the gun over the grip.
Closure is provided by removable dual retention provisions
Separate instruction manual
298-1 Pi CZ 75/85, CZ 100, GLOCK 17/19SIG P-226/228, BERETTA 92 BROWNING GP DA9, Colt M1911
Ambidextrous Holsters with One Loop
Ambidextrous Holsters with One Loop Simple shape belt holsters for pistols with the 5" barrel length and 4" revolvers
Two-piece quick fastening with riveted snap fastener having adjustable length using VELCRO strips
Belt loops on both sides of the holster for the belt 5 cm wide Comfortable use for both right and left handers
B E LT H O L S T E R S
296 Pi CZ 75/85, Colt M1911BERETTA 92, SIG P-226BROWNING GP DA9
296/Z with magazine pouch
627 revolver 4"
296-1/Z SIG P-228,SIG-PRO HK-USP, WALTHER P-99
fig. 1
88
mod. 284
mod. 209
mod. 279
mod. 630
mod. 266
mod. 665
mod. 630/PV
Fully Covered Belts Holsters
Belt full-cover holsters full-lamella holster with fastening belt being part of holster cover connect good characteristic of leather and nylon holsters rigid with shape stability produced by the “sandwich” technology of three-layers material
with inter reinforcement from shape stable material both-sides textile laminated
266 revolver 4"665 PI CZ 75DC, CZ 75/85, BERRETA 92665-1 Pi GLOCK 17/19, SIG P-226/228
Fully Covered Holster PREMIUM
209 2,5-3" revolver (6 shot)209-M 2,5-3" revolver (5 shot)
B E LT H O L S T E R S
279 univerzal Pi CZ 82/83, CZ 75/85, rev. 2-2,5”
630-1 Pi CZ 75/85, BROWNING GP DA 9 SIG P-226/228 BERETTA 92
630-2 Pi CZ 100, CZ G-2000 GLOCK 17/19, HK-USP, Walther P-99
630-1/PV Pi CZ 2075 RAMI, CZ 75/85 CZ 75 DC, CZ 75 SP-01, GLOCK 36/39630-2/PV Pi SIG P-226/228
284 univerzal - Pi 5" / revolver 4"284-1 Pi SIG P-2022
9
mod. 208
mod. 206-1
mod. 631
mod. 206-2
mod. 631A
Sp
or
t
Moulded Belt Holsters
Moulded Belt Holsters Much-favoured belt holsters, their external side is moulded in such a way so as to create space between the body and the holster for quick drawing, esp. re-holstering of the gun
Two belt loops secure maximum stability for carrying the gun in the holster
Double quick-fastening with adjustable length
631-1 Pi CZ 75 D Compact631-2 Pi CZ 100, CZ G-2000, GLOCK 19,
HK USP, SIG P -558, Walther P-99
B E LT H O L S T E R S
208-1 Pi CZ 75 D Compact208-2 Pi CZ 100, CZ G-2000, GLOCK 19
Walther P-99, SIG P–228, HK-USP208-3 Pi CZ 82/83, MAKAROV
206-1 Pi CZ 75D Compact, CZ 82/83, SIG P-226/228, GLOCK 17/19
206-2 Pi CZ 75/85, CZ 75 SP-01, BROWNING HP, COLT 1911
Grand Power 100
631A-1 Pi CZ 75/85, CZ 75 SP-01, BERETTA 92, GLOCK 21, Grand Power 100
1010
mod. 210
mod. 212
mod. 257
mod. 213-3
mod. 213-1mod. 213-2
mod. 200 mod. 212-3
mod. 211
Fig. 1
B E LT H O L S T E R S
Inside-the-Pants Holsters Inside-the-Pants Holsters Designed for concealed carry of the handgun Being carried at the inside of the pants belt in such a way that the holster clips on the belt
Slip-on or permanently riveted clasp from the very high quality spring steel in black or white finish
Inside-the-pants holsters for small pistols and revolvers having 2" barrel length with gun being secured by VELCRO strips
200 Pi CZ-KEWIN210 Pi CZ 45/92211-1 Pi CZ 50/70 Walther PP/PPK211-2 Pi CZ 82/83, MAKAROV212-1 75/85, Colt M1911
BROWNING GP DA9212-2 CZ G-2000, BERETTA 92, GLOCK 17/19,
Walther P-99,SIG P-228/226, HK-USP
212-3 Pi CZ 75 DC, HK-USP213-1 2,5-3" revolver (large frame)213-2 2,5-3" revolver (small frame)213-3 2" revolver 257 universal - 5" pistol / 4" revolver
Pi GLOCK 17/19, SIG P-226/228HK-USP, Walther P-99CZ G-2000
11
mod. 222
mod. 253
mod. 254
mod. 645
360°S
po
rt
222 Balance weight positional with integrated pouch for magazine having one-shoulder rig
222/KZ for cross-rig
645 Balance weight plasticpositionable multi-functionwith one-shoulder attachment
645/KZ for cross-rig
S H O U L D E R H O L S T E R S
Balance Weights Are enclosures for spare magazines pouches, handcuffs or other accessories These together with shoulder holster make the shoulder rig set Individually available for holsters with cross-rigs (designation KZ); for holsters with one shoulder rig are delivered including shoulder harness and connecting module with shoulder holster
Plastic balance weight with belt fastening strip is available as standard item for shoulder holsters with cross-rig standard
Balance weights belonging to 622 and 254 model lines are ambidextrous with easy positioning
Multi-function balance weight 645 makes possible to fix any accoutrement accessories DASTA with belt loop in vertical or horizontal position
Multi-function balance weight 645 makes possible connection of two balance weights and fixing of two accoutrement accessories below each other
Multi-function balance weight rotating 360 degrees; it is possible to fix it to one-shoulder attachment or cross attachment KZ-30 and KZ-40 mm
Standard plastic balance weight of the cross-rig
254 Balance weight positional for two magazines with one-shoulder rig
254/KZ for cross-rig
253 Balance weight combined for handcuff + magazine
253/KZ for cross-rig
Balance Weights
12
mod. 215-1
mod. 215-2
mod. 623 mod. 214
mod. 216/0
mod. 215-1/KZmod. 635/O
Vertical Shoulder Holsters Designed first of all for carrying of large pistols with the 5"barrel length and revolvers with the 4"-6"-8"barrel length
Vertical shoulder holsters come with cross rigs (designation KZ) as ambidextrous holsters, or as one shoulder rig single sided or as both-sides holster (designation O) for ambidextrous application
Holsters have single-piece closure using VELCRO strips, or quick closure with riveted snap fastener
S H O U L D E R H O L S T E R S
Vertical Shoulder Holsters
Vertical Shoulder Holstersmod. Hinge Handguns One-shoulder One-shoulder Cross JRZ JRZ/O KZ 214 214-1 214-1/O 214-1/KZ Pi CZ 82/83, MAKAROV 214-2 214-2/O 214-2/KZ Pi CZ 50/70, WALTHER PP 214-3 214-3/O 214-3/KZ Revolver 2,5"215 215-1 215-1/O 215-1/KZ Pi CZ 75/85, BERETTA 92 Colt M1911, SW m.59 BROWNING GP DA 9 215-2 215-2/O 215-2/KZ Revolver 4"216 216 216/O 216/KZ Revolver 6"256 256 Revolver 8"623 623 Pi CZ KEWIN635 635 635/0 635/KZ-30 CZ 75D Compact, SIG P-228, GLOCK 19262 262 CZ 45/92 One-side Ambidextrous
13
mod. 249/KZ
mod. 250
mod. 656
Sp
or
t
S H O U L D E R H O L S T E R S
Thumb-Break Shoulder Holster
Thumb-Break Shoulder Holster Combines advantages of carrying a gun with longer barrel in a vertical position and option for quick drawing from horizontal position
Delivered for pistols with the 5" barrel length and revolvers with 4" barrel Leather quick-closure with riveted snap fastener is opened by forward twitch while grasping the gun by the grip
Anti-rocking safety of the closure is formed by half-circle perforation around the patent fastener
Two-piece shoulder holster having upper part reinforced with non-deformable material
249 Thumb-break shoulder holster with one-shoulder rig for4" revolver
249/KZ with cross-rig
2x one-shoulder rig JRZ
cross rig KZ 40
250 Thumb-break shoulder rig with one-shoulder rig for the CZ 75/85, BERETTA 92
250/KZ with cross-rig
Holster Premium Line
656 Shoulder holster vertical Pi CZ 75/85, BROWNING BDA GLOCK 17, WALTHER P-99656/KZ-40 cross hinge656-1 BERETTA 92, SIG P-226,
HK-USP
cross-rigKZ 30
14
mod. 280/0mod. 251
mod. 628 mod. 282/0
mod. 281/0
mod. 632/KZ-30
S H O U L D E R H O L S T E R S
Horizontal Shoulder Holsters
Horizontal Shoulder holsters Designed for medium and larger size pistols and for revolvers with the barrel length 2", 2.5-3", 4"
Delivered with one-side rigs as one-side or ambidextrous holsters(marking O), or cross-rig (marking KZ-30)
Two-piece closure adjustable in length using VELCRO strips for all models of holsters designed for pistols and provided with dual retaining of the gun
Shoulder holster horizontal2" revolver
Shoulder holster horizontal Pi CZ 82/83, Makarov
Shoulder holster horizontal - ambidextrousPi CZ 75/85, Colt M1911, SW Mod. 39/59, BROWNING GP DA9280/KZ-30 cross-rig
Shoulder holster horizontal - ambidextrousPi BERETTA 92, SIG P-226/228HK-USP, Walther P 99, CZ G-2000281/KZ-30 cross-rig
Shoulder holster horizontal - ambidextrous2,5-4" revolver282/KZ-30 cross-rig
632/KZ-30Shoulder holster horizontal - ambidaxtrousCross-rigPi CZ 75/85, CZ 75D Compact,SIG P-226/228,GLOCK 17/19,HK-USP,BERETTA 92BROVNING BDA
632/Oone-side attachment
15
mod. 633
mod. 219
mod. 218
Sp
or
t
Fig. 1
Shoulder holster horizontal - combined219 Revolver 2,5 - 4“ (6 shot)219-1 Revolver 2,5 - 4“ (5 shot)219/M Revolver 2“ (5 shot)
633Shoulder holster horizontal - combinedPi CZ 75/85, CZ 75D Compact,SIG P-226/228,GLOCK 17/19,HK-USP.BERETTA 92,BROVNING BDA
633/KZ-30cross-rig
S H O U L D E R H O L S T E R S
Shoulder Holsters Horizontal - Combined(shoulder and belt)
Shoulder Holsters Horizontal - Combined Shoulder holsters with option to be carried on the belt (see Fig. 1) Always supplied with one-side rig harness only as one-side holsters either for left or right hand use
Produced in two basic models for pistols and two models for revolvers differentiating only in size
Two-piece closure with riveted snap fastener having adjustable length using VELCRO strips
For pistol holsters, provided by dual retention of the gun Very popular and practical model
Shoulder holster horizontal - combined218-1 Pi CZ 75/85, Colt M1911
SW Mod. 59, BROWNING GP DA9218-2 Pi SIG P-226/228, HK-USP, Pi CZ 100,
GLOCK 17/19, BERETTA 92Walther P-99
218-3 Pi CZ 82/83, MAKAROV
218/M Walther PP/PPK, CZ 50/70
1616
mod. 286-1 mod. 286-2
mod. 229
mod. 230
mod. 269
mod. 680-1
mod. 680-2
mod. 787
Purse / Etui Vertical
Belt Purse / Etui Vertical286-1 small 13 x 19286-2 large 15 x 22
Transport Cases for Handguns
Transport Cases for Handguns Three basic sizes - small, medium, large Serves for safe transport of handguns and their protection against any damage
Shell is reinforced with non-deformable material, external layer is water-repellent with resistance against wear-off, plastic foam inter-lining 10 mm sewed into textile material
Black colour
Transport Cases for Handguns229 5" pistols and 4" revolvers 230 percusion revolvers and 6" revolvers269 2" revolvers and small pistols
SPECIALTY ACCESSORY CASES
Transport Cases for Handguns680-1 malé 21x15 cm680-2 velké 28x19 cm
787 Etui for guns verticalwith rig over shouder
17
mod. 231
mod. 232
mod. 641
mod. 642
mod. 644
mod. 644-1
Sp
or
t
mod. 644-P
NEW
design
2010
642 Etui for guns horizontalwith removable marking
641 Etui for guns horizontal with zip fastener - large 22x15 cm
641 - 1 small 17x12 cm
Purse / Arms Etui - Horizontal
SPECIALTY ACCESSORY CASES
Purse / Arms Etui - Horizontal Serves for handgun concealed carry Closure with VELCRO strips (Mod. 231) or with zip closure (other models) allows fast gun use Ambidextrous version with the haosety to be used both by left- and right hand
231 Purse/Etui horizontal with VELCRO closure
232 Purse/Etui horizontal with zip-fastener
644 Etui for guns CS
644-1 Etui for guns CS1
644-P Etui for guns CS Pwith removable marking
DASTAprofi
nylon holsters and accessoriessport-profi-hunting
®
®
mod. 652/TZ-M3/M6
mod. 651/TZ-M3/M6
mod. 652-M3/M6
mod. 203-M3/M6
mod. 652-1
A
B
CAMO
mod. 657 MFU/TZ
19
Pr
ofi
mod. 815
mod. 814
652/TZ-M3/M6 PROFI-TACTICALwith rubber inside-liningPi CZ 75 D Compact with module M3/M6GLOCK 17 with module M3/M6
657 MFU/TZMultifuncional tactical holster - universal
652-1 Belt holsterfor Pi with modul M3/M6and Taser M 26 EMD
651/TZ –M3/M6 TACTICALPi CZ 75/85, CZ 75 DC with modul M3/M6Pi GLOCK 17 with modul M3/M6
203 M3/M6Belt holsterfor Pi with modul M3/M6
Bey removal of two screws easy changet for:Pi with laser and tactical lightTASER M 26 EMD/ X 26 EMD
652-M3/M6Duty belt holsterwith rubber inside-liningPi CZ 75 D Compact with module M3/M6GLOCK 17 with module M3/M6
PISTOL HOLSTERS WITH LASERAND LIGHT
815belt holster for modul M6X
814belt holster formodul M3X
20
DLBDLBDASTA – LOCK BLOK
®
AUTO SECURIT Y SYSTEM
720 DLB duty belt and tactical holsters
Série 720 DLB DASTA – LOCK BLOK duty belt and tactical holster
model 720 DLB model 720 DLB/TZ pistole belt tactical720 DLB 10 (mm)+ 720 DLB 10/TZ CZ 75/85, CZ 75 SP-01, COLT 1911720-1 DLB 10 720-1 DLB 10/TZ CZ 75 DCompact720 DLB 12 720 DLB 12/TZ BERETTA 92720 DLB 14 720 DLB 14/TZ SIG P-226720-1 DLB 14 720-1 DLB 14/TZ SIG P-228, SIG P-2022720 DLB 16 720 DLB 16/TZ GLOCK 17, HK-USP720-1 DLB 16 720-1 DLB 16/TZ GLOCK 19, WALTHER P-99 + width of the lock (according to the width of the gun trigger protection)
720 DLB/TZ Tactical
720 DLB„standard“for pistols with 5“ barrel
anatomic shaped locking press button
blocation of tle locking press button
locking press buttoncover-shield
distance cube
horizontal moving bar
720-1 DLB„compact“for compact pistols
2TZTactical hingewhith 2 strips
21
Pr
ofi
DASTA- LOCK BLOKAuto security system
1. automatic locking when handgun is holstered2. lock posibility of the safety locking press haos3. safety placed outside the etui naturally reachable and easy accessible with the index finger of the shooting hand4. placement of the unlocking press haos excludes complicated use or unpossible function of the safety, e.g. covering by the suit 5. the unlocking press buton cover protects safety against unvoluntary movement 6. suitable width and anatomic haose the unlocking press buton leads the index finger of the shooting hand out off tle trigger and makes possible the safe and easy manipulation with the safety even for people with short or thick fingers7. till three independent duty holster safety can be made off at the same time by big and index finger of the shooting hand8. system of independent safety makes possible to haose the level of the gun safety in the holster from one to three
Pic. 1Locking press button easy manipulated by natural movement of the shooting hand index finger by handing of the gun
730 DLBHolster for standart pistols 5“
Série 730 DLB DASTA – LOCK BLOK holsters for concealed carrying
model 730 DLB model 730 DLB/OZ model 730 DLB/ Pd pistole fixed lo turning loop „padle“730 DLB 10 (mm)+ 730 DLB 10/OZ 730 DLB 10/Pd CZ 75/85, CZ 75 SP-01, COLT 1911730-1 DLB 10 730-1 DLB 10/OZ 730-1 DLB 10/Pd CZ 75 DC730 DLB 12 730 DLB 12/OZ 730 DLB 12/Pd BERETTA 92730 DLB 14 730 DLB 14/OZ 730 DLB 14/Pd SIG P-226/228730-1 DLB 14 730-1 DLB 14/OZ 730-1 DLB 14/Pd SIG P-2022, HK-USP, HK P-30 730 DLB 16 730 DLB 16/OZ 730 DLB 16/Pd GLOCK 17730-1 DLB 16 730-1 DLB 16/OZ 730-1 DLB 16/Pd GLOCK 19, WALTHER P-99730-M DLB 10 730-M DLB 10/OZ 730-M DLB 10/Pd CZ 82/83, MAKAROV, TOKAREV TT-33+ width of the lock (according to the width of the gun trigger protection)
AUTO SECURIT Y SYSTEM
730 DLBholsters for concealed carrying
730-1Holster for compact pistols
22
PLASTIC HOLSTERDASTA – LOCK BLOK
PH DLBPH DLB®
AUTO SECURIT Y SYSTEM
Série 740 PH DLB PLASTIC HOLSTERS DASTA – LOCK BLOK plastic duty belts and tactical holsters
model 740 PH DLB model 740 PH DLB/TZ pistole belt tactical740 PHDLB 10 (mm)+ 740 PHDLB 10/TZ CZ 75/85,CZ 75 SP-01,COLT 191,BROWNING HP740-1 PHDLB 10 740-1 PHDLB 10/TZ CZ 75 Compact, CZ 75 DC - P1740 PHDLB 12 740 PHDLB 12/TZ BERETTA 92740 PHDLB 14 740 PHDLB 14/TZ SIG P-226740-1 PHDLB 14 740-1 PHDLB 14/TZ SIG P-228, SIG P-2022, HK-USP, HK P-30740 PHDLB 16 740 PHDLB 16/TZ GLOCK 17740-1 PHDLB 16 740-1 PHDLB 16/TZ GLOCK 19, WALTHER P-99 + width of the lock (according to the width of the gun trigger protection)
740 PHDLB/TZ – ITactical with one balance device
740 PH DLB Plastic duty belts and tactical holsters
740 PHDLB„standard“
for pistols with 5“ barrel
740 – 1 PHDLB„compact“
for compact pistols
740 PHDLB/TZ – IITactical with two balance device
2PHTZ-ITactical hingewith 2 strips
23
Pr
ofi
PLASTIC HOLSTER DASTA-LOCK BLOK
AUTO SECURIT Y SYSTEM
750 PHDLB/Pd„padle“
750 PH DLBPlastic holsters for concealed cyrrying
third generarion holsters
1. original construction with fully new characters of plastic holsters2. single profile of holster cover – universal for different guns3. carrying element of the holster – lock DASTA with automatic safety and distance cube making possible easy change for any gun4. width of the lock regulated according to the width of the trigger shield for individual gun type (see the Table)5. holster modification – for duty or concealed carrying of the gun6. posibility to block the auto security systém
Security – Design – Flexibilitymod. 750-1 PH DLB
Holster for compact pistols
Série 750 PH DLB PLASTIC HOLSTERS DASTA – LOCK BLOK plastic holsters for concealed carrying
model 750 PHDL model 750 PHDL/OZ model 750 PH DLB/Pd pistoleattachment attachment rotating „padle“turning loop turning loop750 PH DLB 10 (mm)+ 750 PH DLB 10/OZ 750 PH DLB 10/Pd CZ 75/85, CZ 75 SP-01, COLT 1911750-1 PH DLB 10 750-1 PH DLB 10/OZ 750-1 PH DLB 10/Pd CZ 75 DC750 PH DLB 12 750 PH DLB 12/OZ 750 PH DLB 12/Pd BERETTA 92750 PH DLB 14 750 PH DLB 14/OZ 750 PH DLB 14/Pd SIG P-226/228750-1 PH DLB 14 750-1 PH DLB 14/OZ 750-1 PH DLB 14/Pd SIG P-2022, HK-USP, HK P-30 750 PH DLB 16 750 PH DLB 16/OZ 750 PH DLB 16/Pd GLOCK 17750-1 PH DLB 16 750-1 PH DLB 16/OZ 750-1 PH DLB 16/Pd GLOCK 19, WALTHER P-99+ width of the lock (according to the width of the gun trigger protection)
750 PHDLBHolster for standart pistols 5“
attachment turning loop
750 PHDLB/OZattachment rotating
turning loop
24
mod. 260
mod. 258
mod. 674
mod. 673
mod. 673/2TZ
D U T Y H O L S T E R S
PROFI Holsters with Rubber Inter-Lining
PROFI - duty belt holster with rubber inside-lining "compact" model
PROFI - duty belt holster with rubber inside-lining "standard" model
model 258 model 258/TZ Pistol
for belt tactical
258 258/TZ GLOCK 17
258-1 258-1/TZ CZ 75/85
258-2 258-2/TZ BERRETA 92
258-3 258-3/TZ SIG P-226
model 260 model 260/TZ Pistol
for belt tactical
260 260/TZ GLOCK 19
260-1 260-1/TZ CZ 75 D Compact
260-2 260-2/TZ CZ G-2000
260-3 260-3/TZ HK-USP, Walther P 99, SIG P 228
260-4 260-4/TZ CZ 82/83
PROFI Holsters with Rubber Inter-Lining Screwed duty holsters with exchangeable rubber inter-lining moulded according to the gun type
Very variable modular system with compact basic components Two basic models differentiating only in the size of the shell; Mod.258 standard (large) for pistols with barrel 5"length and Mod.260 compact (small) for compact pistols - in a set with belt or tactical rig (designation TZ)
Moulded belt harness is reinforced with steel stiffener and further provided with VELCRO strip and adjusting screw preventing any inadvertent shifting of the holster on the belt
Construction of the external plastic reinforcement and the way of mounting the rig, which is CZ registered patent, makes possible that after a simple change this holster can be used by both left and right hander
Two-piece quick fastening with dual retaining through securing strip of the closure Barrel guide
673 belt holster for TASER X 26
674 Cover flap
673/2TZ Tactical holster for TASER X 26
25
mod. 258/TZ
mod. 258/TZ-A
mod. 258/TZ-B
Pr
ofi
TA C T I C A L H O L S T E R S
PROFI - TACTICAL Holsterwith Rubber Inter-Lining
PROFI TACTICAL Case with Rubber Inter-Lining Engineered for public order and special response police units Three basic models:1. basic set without cover flap2. set with narrow cover flap A3. set with wide cover flap B
The cover flap is removable and it is possible to close it with plastic clasp and this can be fixed in an open position to the tactical rig
Tactical rig with internal plastic stiffener adjustable in length with VELCRO strips (the stiffener can be made shorter by cutting it off)
Tactical rig ending with separate extension for quick and easy fastening to the belt
Fixation to the thigh by mounting strip adjustable in length using VELCRO strips and spring-loaded rubber strip mounted to oval stabilisation base
Standard oval fixation base with one mounting strip can be substituted by oblong base with two fastening strips
Ambidextrous use either by left or right hander after simple adjustment (wide cover flap is supplied as standard solely for right-side model only)
PROFI - TACTICAL with rubber inside-lining and with narrow flap A
PROFI - TACTICAL with rubber inside-lining and with wide flap B
PROFI - TACTICAL holster with rubber inside-lining
2626
mod. 227/TZ-B
mod. 261/TZ
mod. 643/TZ
mod. 655/TZ
CAMO
mod. 537 TZM
mod. 535 TZAM
mod. 643
mod. 220
TA C T I C A L H O L S T E R S
Tactical Hinge
220-1 Pi CZ 45/92, CZ 50/70, Walther PP/PPK220-2 2" revolver (5 shot)220-3 2" revolver (6 shot)220-4 Pi CZ KEWIN
Ankle Holsters
261/TZ Tactical hinge2x magazine
655/TZ Tactical hingemulti-functional
TACTICAL holster with rubber inside-lining and flap227/TZ-B Pi CZ 75/85, BERETTA 92227/TZ No cover flap227 Belt227-1 Pi SIG P-228, HK-USP, WALTHER P-99
643/TZ Tactical hingePYROCOOL 2
537 TZ AM Tactical hinge A - MOLLE
535 TZ UM Tactical hingeU- - MOLLE
643 belt holster for PYROCOOL 1
27
mod. 228/TZ
mod. 228/TZ-C
mod. 638-1/TZ
CAMO
mod. 638/TZ
mod. 638
mod. 638-1
Pr
ofi
Pr
ofi
mod. 651/TZ-PARA
CAMO
TA C T I C A L H O L S T E R S
Tactical Holsters Tactical holster with removable flap228/TZ-C Pi CZ 75/85, BERETTA 92, SIG P-226228-1/TZ-C Pi CZ 75 D Compact, SIG P-228,
HK-USP, Walther P 99
Tactical holster without flap228/TZ Pi CZ 75/85, BERETTA 92, SIG P-226,228-1/TZ Pi CZ 75 D Compact, SIG P-228, HK-USP,
Walther P 99
PROFI – TACTICALwith rubber inside-lining
638/TZ Revolver 4"638-1/TZ Revolver 3"
651/TZ-PARATactical holster with magazinePi CZ 75/85, GLOCK 17, BERETTA 92,BROVNING BDA,SIG P-226,HK-USP, WALTHER P-99
model 638 model 638 revolver
for belt tactical
638 638/TZ 4"
638-1 638-1/TZ 3"
PROFI – duty belt holsterwith rubber inside-lining
638 Revolver 4"638-1 Revolver 3"
28
mod. 276
mod. 278
mod. 272 TCC
b
aCAMO
D
B
A
C
272 MTSMultifunctional tactical setfor SA-61 SCORPIONfor Pi SCARABEUS
272 TCC ConfigurationA Tactical holster assemblyB Belt holster assemblyC Vertical shoulder holster with cross-rigs assemblyD Tactical shoulder holster assembly for open carrying
660 Tactical sling SA-61 a. fixed in two points (on the chest) b. fixed in one point (horizontally along body,
barrel downwards)
Multifunctional tactical set
DASTA Tactical sling
276 Belt holsterfor CZ Scorpionsubmachine gun
M I L I TA RY H O L S T E R S
278 Double magazine pouch with 20 rounds mag. capacity each for SMG Mod. 61 cal. 7.65 mm
29
mod. 270
270/TZ ARMY-TACTICAL
A.L.I.C.E. Clip
Pr
ofi
CAMO
CAMO
mod. 538
mod. 541 mod. 542
mod. 270/TZ
mod. 661
mod. 274
274 Belt holster ARMY-TROPIC Pi CZ 75/85, BROWNING BDA, HK-USP, SIG P-226/228, WALTHER P-99, BERETTA 92, GLOCK 17
270 Belt holster ARMYPi CZ 75/85, BERETTA 92, SIG P-226GLOCK 17
Military Holsters
M I L I TA RY H O L S T E R S
661 Universal tactical slingthree points
Universal tactical sling
538 Bandalír 4 magazines, 1 inside, 2 outside pocket
mod.541 SA-58/AK-47 single magazine pouch
mod.542 SA-58/AK-47 double magazine pouch
30
mod. 240
mod. 676
613-1613 244 244-1
mod. 246
259-A/SZ33/90 mm
259-B/SZ33/105 mm
259-C/SZ33/145 mm
259-D/SZ33/160 mm
mod. 646
360°
259-B-1/SZ33/110 mm
646 Rotary loopwith position fixation VELCROfor expandable baton ExB 16/21”
Key Ring Holders
613 Key ring holder - iron hook613-1 Key ring holder - plastic hook244 Key ring holder244-1 Key ring holder - "bell"
D U T Y A C C E S S O R I E S
Mace/Pepper Spray Holders
240 Holder - "KASR" CZ-POLICE246 Mace/Pepper spray holder 33/90 mm
259 Mace/Pepper spray holder - square
676 Rotary loopwith position fixation VELCRO for expandable batonExB 16/21“
31
242-1 242-2
360°
Pr
ofi
mod. 505
360°
Reversible Holder with Position Fixation
Two-piece harness, the back part is created by loop for the belt (5 cm wide) and
the front part has a loop to hold the baton
The baton retention against losing is provided by security strip with riveted
snap fastener over the transverse handle
Both harness parts can be rotated for 360° against each other around the
middle pivot and they can be firmly fixed in a in several positions with four
riveted snap fasteners
The fixation allows to carry the baton in 4 basic positions, i.e. vertical down- or
upwards, or in 30° angle up- or downwards
Rig provides firm and stable fitting suitable for any kind of movement
Baton Holders and Rings
Baton holder242-1 with plastic and fixation ring242-2 with iron ring (black colour)
Tactical position
Emergency position
D U T Y A C C E S S O R I E S
504 Reversible baton belt holderwith positional fixation for baton
"BONOWI ES 6"
Basic position
505 Rotary loop with positron fixationVelcro for tonfa A.I.T.O.
3232
mod. 255-1
mod. 297-2
mod. 297-1
mod. 255-2 mod. 236
mod. 238-1
mod. 238-2
mod. 636 mod. 636-1
mod. 297-3
636 Magazine case reinforced – small CZ 75 DC POLICE CR636-1 Magazine case reinforced – large
D U T Y A C C E S S O R I E S
Magazine Pouches
236 Magazine pouch with loop, large255-1 Magazine pouch bordered with loop, large255-1/S with steel clip255-2 Magazine pouch bordered with loop, small255-2/S with steel clip297-3 Magazine pouch univerzal
297-1 Magazine pouch ARMY with VELCRO loop, large297-2 Magazine pouch ARMY with VELCRO loop, small
268 Universal double magazine pouch
261-1 Double magazine pouch bordered
261 Double magazine pouch 675 Baton for case-holder+knife
33
mod. 238-8
mod. 245 mod. 245-1
mod. 245-2
mod. 606
mod. 640
mod. 242-2
mod. 259E4
mod. 238-4
mod. 238-5
mod. 238-6
Pr
ofi
mod. 238-3 mod. 238-7
D U T Y A C C E S S O R I E S
Handcuff Pouches
Radio Pouches
Flashlight Holder
242-2 Flashlight ring MAG LITE C-Cell with iron ring
245 Radio pouches for MOTOROLA GP 300, P 110
245-1 Radio pouches for MOTOROLA GP 300, P 110
245-2 Universal radio pouches MOTOROLA ATS 2013 MX 3010
640 Case for battery MINI MAG LITE
606 Flashlight case-holder MAG LITE D-cell
238-6 Double handcuffs pouche (handcuffs + latex handschuh + key)
238-8 Handcuffs pouche
238-7 Hinge for demonstration chains
34
mod. 243-1
mod. 637
mod. 271-B mod. 271-Cmod. 271-A
mod. 637-2
mod. 235
mod. 637-1
mod. 800 A mod. 800 B
mod. 235-1
Small case for documents235 small, 10 x 14 cm235-1 small horizont. 10 x 14637-1 middle, 12 x 18 cm637 big, 14 x 20 cm637-2 midle horizont. 12 x 18 cm
Small case for documents A6 12x17 cmwith internal division guichet800 A with bag lock800 B with two fasteners
271 Cases for elektro-paralyser271A small271B middle271C big
Cases for Elektro-paralyser
Duty Cases for Documents
243-1 Belt nylon keeper
Belt Keepers
D U T Y A C C E S S O R I E S
35
mod. 405
mod. 681
mod. 621
mod. 681-1
Pr
ofi
mod. 701
mod. 247-1 mod. 247-1p/TZmod. 247-1p
CAMO
Double Latex Glove Wallet621 Double latex glove
pouch
405 Shooting Case Very practical double compartment case for transport of handguns and shooters accessories
External package with several pockets with two handles for carrying in the hand and with the sling to be carried on the shoulder
Internal removable case constitutes solid shell featuring separate compartments for four guns in total divided in two independent pockets located at walls on both side
Possibility to place shooting accessories in the middle of the internal compartment that can be divided by moveable partition using VELCRO strips into several sections including individual loops for magazines
Water-repellent KORTEXIN material with high resistance to be worn off
Black colour
Shooting Case
D U T Y A C C E S S O R I E S
Handschuh rig681 rig with buttons681-1 Velcro rig
Handschuh rig
701 Tactical Bag for Protective Mask horizontal
Tactical Bag for Protective Mask
PARA – Etui for duty knife247-1 without accessory247-1p with accessory247-1p/TZ tactical
3636
mod. 639
mod. 620
P O L I C I E
12
13
14
15
1
2
3
4
5
8
7
6
9 10
1A
9A
11
M Ě S T S K Á
15 6
L 90-103 cm 160-175 cm
XL 103-110 cm 175-185 cm
XXXL 115-125 cm 185-195 cm
654 Neck-cloth reinforced
659 Jockstrap
Tactical vest - universal system639/P assembly POLICIE
Tactical Vest
TACTICAL VEST 639 UNI
Description-set: (standard model - 15 parts)1. Big pocket for documents2. Loop for battery MINI MAG LITE3. Etui for magazine4. Etui for magazine5. Multi-utility case (tear gas, telescope baton, multi-
functions pincers)6. Multi-functions big pocket7. Etui removable for transmitter MOTOROLA
GP 300 (P-110)8. Small pocket for personal properties
(mobile phone)9. Pistol case standard model for CZ 75 DC,
CZ 75/85, SIG P-226/228, BERETA 92, HK-USP9A Flat pocket10. Holder baton11. Loop for baton (battery MAG LITE C-Cell/D-Cell)12. Back pocket left-side for transmitter
and spare battery13. Hand-cuffs case14. Multi-utility case (tear gas, telescope baton,
multi-function pincers)15. Back pocket right-side
DUTY OUTFIT AND EQUIPMENT
620 Belt case for gas grenade
Etui for mobile phone805 mobile phone 10 cm heigh806 mobile phone 12 cm heigh
Size Distrikt of chest Height
37
Pr
ofi
USVUSV
NEW
2010
•• USVUSV
•• USVUSV
•• USVUSV
•• USVUSV
CZ PUV 2009 - 21598
USV - NS4
®
DUTY OUTFIT AND EQUIPMENT
is the basic bearing element for a support system of brand new design and properties
is formed by self-supporting textile strips, folded, tied and sown in a way that it creates a coherent textile surface with integrated vertical and horizontal loops.
bearing components have regular square or rectangular shapes and are fitted with fixed and adjustable linking elements.
bearing components can be used individually or linked together to form suitable support systems
536/TZ USV Tactical panel USV
UNIVERSAL FRAMELESS TIE
38
mod. 234-1/TAV TACTICAL
mod. 234-1/V POLICE
mod. 601-1/V SECURITY
mod. 299 ARMY
mod. 299/V ARMY-OFFICER
mod. 899
mod. 233
D U T Y H O L S T E R S
Duty and Garrison Belts
234-1/TAV Duty double-belt 50/1200 mmwith steel loop and internal VELCRO strip
234-1/V Duty double-belt 50/1200 mmwith double security through VELCRO strip and plastic buckle with internal VELCRO strip
Size Overall belt length Waist
S 100 cm 77-95 cm
M 110 cm 87-105 cm
L 120 cm 97-115 cm
XL 130 cm 107-125 cm
XXL 140 cm 117-135 cm
299 Duty stiffened-belt 50/1200 mmwith plastic buckle
601-1/V Duty double-belt 50/1200 mmwith internal VELCRO stripplastic buckle and two plastic loops
899 In-side belt 40/1200 mm with VELCRO strip
299/V Duty stiffened-belt 50/1200 mmwith plastic buckle and two belt keepers - bordered
233 Sling belt – simple 40/1200 mmwith plastic clip
DASTA
nylon holsters and accessoriessport-profi-hunting
®
®
Hunting Accessories
hunting
4040
mod. 312
mod. 309
mod. 328
mod. 329
mod. 275
309 Shot cartridge belt for hunting ammunition309-1 7 Shot gun cartridges309-2 4 Shot gun cartridges plus 3 rifle cartridges
658 Shot gun cartridge belt
H U N T I N G A C C E S S O R I E S
Hunting Ammunition Belts - Textile
306-3 Hunting shot gun belt with flaps, textile
306-1 Hunting shot gun belt - open top, textile
306-4 Hunting belt combined with pockets
306-2 Hunting belt - combined (rifle, shot gun) open top, textile
312 Belt ammunition casefor 6 rifle cartridges
Rubber lining inside of the belt structure100 percent fixed position
328 Anti-slippery rifle sling
Textile wide rifle sling329 Inside with wool textile329/G Inside with anti-slippery rubber
275 Handgun cartridge carrier(for 6 revolver rounds)
41
CAMO
Lo
v
CAMO
CAMO
H U N T I N G A C C E S S O R I E S
Hunting Guns Transport Cases
330 LOV 6 TRANSPORT CASE FOR RIFLE WITH OPTIC
plastic foam 25 mm, length 100 cm, colour green or black
331 LOV 7 Transport case for rifle with opticplastic foam 25 mm, length 136 cm, colour green or black
303 LOV 3 Transport case for rifle with opticplastic foam 25 mm, length 120 cm, one outside pocket, green or black colour
302 LOV 1 Transport case for rifle with opticplastic foam 45 mm, length 120 cm, one outside pocket, green or black colour
304 LOV 4 Rifle cover, length 120 cm,colour green or black
301 TACTIC Large tactical rifle case with plastic foam inside-lining width 25 mm, length 120 cm with 7 outside pockets
307 LOV 8 Transport case for dismantled Shotgun Inside plastic foam 25 mm Barrel inside and outside pocket
301-1 TACTIC I Transport tactical case Inside plastic foam 25 mm Length 80 cm Suitable also for SA-58 and AK-47
301-2 TACTIC II Transport tactical case Inside plastic foam 25 mm Length 80 cm
4242
mod. 311
mod. 647 mod. 648
mod. 649
mod. 310
Cartridge stock etui647 rubber 1/rifle 2/shot gun648 adjustable 1/rifle 2/shot gun649 rubber exchangeable loops rifle – shot gun649-A adjustable exchangeable loops rifle – shot gun
H U N T I N G A C C E S S O R I E S
403 Shooters vest SKEET
Shooters vest
Model Colour Size
403 SKEET blue L, XL, XXL,XXXL
green
310 Barrel-muzzle cover-universal(rifle/schot gun)
619-1Cartridge stock etui - rifle
619-2Cartridge stock etui - shotgun619-3Cartridge stock etui - combined rifle/shotgun
Gun maintenance kit case311-1 Rifle maintenance kit case311-2 Shot gun maintenance kit case
www.dasta.cz
nylon holsters and accessoriessport-profi-hunting
®
Dear customers,Since 1992, DASTA is registered and protected trade mark and today this company is already traditional Czech producer. Its main activity is concentrated in development, production and sale of arm accesso-ries – first of all nylon holsters for guns, accoutrement and accessories for armed forces together with accessories for hunters.
DASTA history begins in 1991 with origin of the physical persons association with the trade name Dana Staňková-DASTA with successful and very dynamic development from very origin. In 2004, this associ-ation has been transformed into new originated company DASTA s.r.o. taking over the whole production program with continuous development. In 2007 new modern premises were open in Prostejov – the town with a long time tradition in textile and tanning production of Moravian region.
At present time, company DASTA s.r.o. offers for its clients around 300 catalogue items. According to the complexity and production items, DASTA s.r.o. belongs already several years to the companies with the most comprehensive offer of this kind in the Czech Republic. Offer creates the whole production col-lection that is developed in a continuous and in such a way that it will satisfy the needs and requirements of the widest circle of users as from the civil sector so as from the armed forces.
Therefore, the company reserves its right to make such changes in the offer that lead to design, function characteristic improvement, or comfort increase in individual production items` use.
DASTA-sport involves collection of belt and tactical nylon holsters divided into several independent cate-gories – and other arm accessories determined first of all for civil sector but also for armed forces - first of all for concealed gun carrying.
DASTA-profi involves duty belt and tactical holsters, complete accoutrement items and accessories de-termined for professional armed forces - first of all for Police, Prison and Customs Service but also for Community Police or civil security agencies. Users character and technical level of this category corre-spond with requirements determined for duty accessories and with the use in armed forces. Their quality is checked by many years use in armed forces of the Czech Republic and abroad. DASTA Ltd. and its members cooperate closely on their development with many professionals from armed forces, especially in the framework of IPA (International Police Association) membership.
DASTA-lov (hunting) involves basic hunting accessory and hunters items.
DASTA products are made from top domestic and foreign material incorporating health-safe substances only. Used material - together with modern way and production technology, together with many years experience of our workers in this area of production, are the guarantee of high quality, comfort and long years durability of the whole collection.
The DASTA s.r.o. company exports their products to a number of EU countries through both the direct clients abroad and the domestic business partners as well as states of Eastern Europe and Asia.
Distribution and sale of company DASTA s.r.o. products is realized in domestic market exclusively throu-gh agreement wholesale partners, or through direct products delivery into chosen retail shops in the whole Czech Republic. Logistics and delivery product service to all individual customers is provided throu-gh AIR SOFT (www.airsoftshop.cz) company. Another option how to get a product is logging on to J.G.S. TRADE s.r.o. (www.jgstrade.cz) internet shop, respectively the company dealing with foreign as well as domestic wholesale including deliveries to retailers´ store network with guns and munition within Czech Republic.
The DASTA s.r.o. company appreciates both foreign and domestic business partners and customers´ continuing interests in DASTA branded products which makes it for further extension of our entire pro-ducts offer by new product line that might be included in the catalogue.
Owing to the fact that the DASTA s.r.o. company releases their catalogues for a period of two years the-refore new products shall be seen on www.dasta.cz website.
With kind regards Dana Staňková Executive Company
DASTA s.r.o.
DASTA s.r.o.Manufacture:
Svatoplukova 48a,796 01 Prostějov
DASTASINCE 1991KATALOG 2010
®
Distributor
© L
D s
tudi
o U
hers
ký O
stro
h -
desi
gn,
tel.:
+ 42
0 77
7 75
0 15
9
USV
www.dasta.cz
nylon holsters and accessoriessport-profi-hunting
®
Nylon HolstersDuty Equipment
Hunting Accessories
DASTA s.r.o.Ke Klí�ovu 714/6, 190 00 Praha 9, Czech Republic
Tel.: + 420 2 83880439 Fax: + 420 2 86583402e-mail: [email protected], www.dasta.cz
export department: Tel.: + 420 2 51621768 Fax: + 420 2 51611969
e-mail: [email protected]
Notice for the usersDASTA products are made with the use of high techno-logy and long-term knowledge in this area with following development trends not only in Europe but also in the world. Technical level and the usability of arm holsters, accoutrements, and accessories used in arm forces, ful-fill the requirements for duty accessory.Material and production technologyDASTA products are made from nylon water-repellent material having high resistance against chafing. Hols-ters for handguns are produced using “trilaminate” or “sandwich“ technology. The “Trilaminate” is a double-side laminated foam epithelium “POLYFOAM” with upper ma-terial based on polyamide fibrous of “Cordura” type, and with inner material on a micro-velour basis. POLYFOAM is a foam epithelium with closed cell structure not ab-sorbing water.Sandwich is material with individual plies where the foam epithelium is replaced by the form permanent material with high density polyethylene PE 950 or PE 750 in dif-ferent thickness and rigidity level – first of all for duty holsters, or for accessories. The inner material – based ona micro-velour, is usually laminated with 2 mm foam ply. Majority of material used for production has the ISO 9002 Certificate for quality check.Treatment and products serviceProducts dont need any special treatment. Heavy dirty can be removed by brush and rubber wet out in com-mon detergent. Holster can be then left to become dry in a temperature around 40 oC. Dirty Velcro fastener or the damaged press rivet closures can be removed. By duty holsters, where the removable screw caps are used, it is necessary to check on regular basis their firmness.Assembling of arm holsters and accessoriesDASTA products create complete collection and it allows to put together any duty belt or shoulder set according to the need. Shoulder set can contain vertical, horizon-tal, combined, or break-out shoulder holster and particu-lar balance weights, or plastic standard or multi-function balance weight. Shoulder sets can be completed as one--side or both-sides sets with cross hinge KZ 40 or KZ 30 (width of belt in mm), with two one-shoulder belts or with net hinge. Combined shoulder holsters (and even belt holsters) and break-out holsters are for one side only.Order number and the system of products markingOrder number (sometimes accompanied by capital let-ter) mentioned on identification product label in PET pa-ckage, is composed of the following:• three places number - producers number marking basic model• number behind dash - modification of basic model – for gun holster means type of gun; for accessories it means different models or their size in one set (e.g. hand-cuffs holster, etc.);• letters after slash mean the following:“O” – both-sides holster“KZ 30” cross hinge and its width in mm“KZ 40” cross hinge and its width in mm“SZ” net hinge for both shoulders“TZ” tactical hinge“TZ-A” tactical hinge + narrow cover holster lappet
“TZ-B” tactical hinge + bride cover holster lappet“S” steel clip“V” Velcro fastener“P” POLICE“SC” SECURITY“p” accessory UTONUInnovation and new productsContinuous replacement of the used foam epithelium through new foam epithelium POLYFOAM 5050 having lower level of frothing, it brings higher firmness and sha-pe stability of nylon holsters. Replacement of press rivet knobs through products from abroad, having guarante-ed press firmness at least 4kp, improves the security for holster use. Increased use of “sandwich” technolo-gy brings higher firmness and resistance first of all for accoutrement and accessories for professional armed units. It allows also creation of new models for whole-co-ver holsters of the PREMIUM line connecting good cha-racteristic of leather and nylon arm holsters. In recent years we have strived hard to bring in some innovations and DASTA-LOCK casing improvement with an automa-tic safety locking system which is a Czech copy-right pro-tected utility design No. 14038 to have been registe-red in 2003. The redesigned DASTA-LOCK system is an elementary platform to the initial Czech plastic casings with a uniformed profile shell and brand new and original properties designated PLASTIC HOLSTER DASTA-LOCK which had been presented in 2006 for the first time.Total new for 2010 is the U S V – Universal frameless tie basic bearing element for a support systém of brand new design and properties. CZ pat. PUV 2009-21598.
Information for the usersAll firearms if improperly and carelessly handled are po-tentially dangerous to life and health.Before the use of the gun and the holster, we recom-mend to read these safety precautions carefully and ob-serve the rules herein contained:1. Use only the holster designed by the producer for the
particular gun model (per designation on the label).2. Use the holster in the way as recommended by the
producer (as belt, shoulder or concealed holster). Concealed holsters are designed to be carried inside--the-pants in such a way that the clip of the holster catches the belt.
3. Try every new holster and by holstering take care that it goes smoothly and it doesn‘t come to any unwanted or inadvertent move or shifting of any part of the gun (hammer, slide, etc.).
4. Don‘t carry the gun in the holster with round in the chamber.
5. Always keep your finger OFF the trigger when drawing and holstering.
6. NEVER HOLSTER A COCKED HANDGUN.7. Make the fastening of the holster by setting the VEL-
CRO strap in an individual way according to the need (according to gun type) in such a way that the gun is firmly holstered in a secure way and protected aga-inst accidental loss.Riveted snap fasteners must be closed in a parallel way against each other (on the side closure but not on its back side).
8. Exchange any damaged riveted snap fasteners or Velcro straps if necessary.
9. Use securing strap with holsters having dual retention.