SPS – SURFSubsea Production SystemsUmbilicalsRisersFlowlines

April 2015

A powerhouse of leading technology companies in Norway

Subsea Valley represents some of the world’s most innovative companies in the subsea industry located in the axis from Notodden to Oslo.

We work to strengthen our member’s competitiveness in a national and global market.

StrengthWe bring together and promote the Norwegian subsea industry – a world-leading environment for subsea solutions.

AmbitionNCE Subsea is an industry initiative that works to strengthen and internationalise busi-nesses, R&D and education in the field. Our goal is to promote further development of the Norwegian subsea industry by increasing innovation. We believe that further invest-ments in R&D will result in new products and services that can increase our market share.

In order to achieve these goals we focus on:

• Attracting and retaining talents• Utilising business potential• Stimulating innovation• Enhancing market orientation

ExpertiseNorway’s subsea industry has succeeded due to hard work, innovation and collabo-ration. Over time its companies and R&D institutions have developed great expertise that enables us to challenge each other and face common issues together.

Frontpage: Below left: Source: Aker Solutions, middle: Source: EMAS AMC, right: Source: DOF.

subseavalley.com

www.ncesubsea.no

Moving into increasingly deeper waters has been a major trend in the development of offshore oil and gas discoveries. Compared to fixed platform solutions, development applying floaters and SPS-SURF solutions became increasingly important as discover-ies on the Norwegian continental shelf (NCS) called for solutions for water depths in excess of 200 – 300m.

The Norwegian oil & gas industry met this domestic challenge through R&D, feasibility studies and technology development and this resulted in innovative solutions initially qualified for field developments on the NCS.

It also resulted in a cluster of suppliers and service providers as well as companies with marine operations capability, required to implement the solutions in the field.

SPS-SURF solutions will play an increasingly important role as fields are to be developed in deeper and more remote areas – as well as for the development of marginal fields tied back to fixed or floating hubs covering larger areas.

Over the last 20 years Norwegian-based SPS-SURF companies has faced even bigger challenges in international markets and, through their deliveries, been recognized as a world class cluster. This catalogue presents the Norwegian SPS-SURF Cluster with its significant growth of SME companies as well as ship-owners moving into marine operations.

SPS – SURF Categories

The catalogue presents INTSOK partner companies and their competences and capabilities in SPS-SURF as well as a matrix for a quick overview of their capabilities. The main categories used in this capability catalogue are:

Engineering & Technical Services: Subsea and SURF technologies are highly specialized with particular demands on engineering & technical services; covering services from multiphase flow simulations, total system studies, pipeline and subsea architectural design to detailed installation and tie-in studies.

Subsea Production Systems (SPS): These systems can range in complexity from a single satellite well with one flowline tied back to a fixed platform or a floating installation, to several wells on a template or clustered around a manifold and transferring to a fixed or floating production facility . Subsea Production Systems include seabed located hardware, from wellheads and X-mas trees to templates, manifolds and connection systems for flowlines and risers, as well as potential subsea power, separation and boosting systems. Also specialized equipment like tooling for installing and maintaining the systems and working over the wells are included.

Umbilicals, Risers & Flowlines: The The hardware elements that are required to con-nect the subsea systems to a fixed platform or a floating unit.

Marine Operations and Intervention: The installation of hardware and servicing it throughout its life cycle requires marine installation and/or intervention vessels. The servicing requires deployment of tooling from an intervention vessel.

This catalogue showcases an innovative cluster of INTSOK partners covering the complete subsea architecture required for development of oil and gas discoveries in deepwater. They provide hi-tech solutions in a complementary and competing environment and are increasingly important for the sustainability of the Norwegian Oil & Gas supplier and service industry.

Introduction

Regional Director,Per Hagen

3

Capability Matrix

4 Su

bsea

ABB

AS

Aker

Sol

utio

ns

BAN

DAK

GRO

UP

Bred

ero

Shaw

Nor

way

AS

Clam

pOn

AS

Cran

emas

ter (

Erns

t-B.

Joh

anse

n AS

)

CRE8

Sys

tem

s AS

Deep

C

Deep

Oce

an A

S

DNV

GL

DOF

Subs

ea A

S

EMAS

AM

C

FMC

Tech

nolo

gies

FORC

E Te

chno

logy

Nor

way

AS

Freu

denb

erg

Oil

& Ga

s Te

chno

logi

es

Fugl

esan

gs S

ubse

a AS

Hite

c Pr

oduc

ts

IKM

Sub

sea

IKM

Tes

ting

AS

Inst

itute

for E

nerg

y Te

chno

logy

(IFE

)

KON

GSBE

RG O

il &

Gas

Tech

nolo

gies

MAR

INTE

K

Mul

ticon

sult

Nex

ans

Nor

way

AS

Nym

o

One

Subs

ea

Park

er M

ariti

me

PG F

low

Sol

utio

ns (I

ng. P

er G

jerd

rum

AS)

RAE

Ener

gy

Rein

erts

en A

S

Sand

vik

Rise

r Tec

hnol

ogy

AS

SEAB

OX

Siem

ens

Oil

& Ga

s Su

bsea

Sol

utio

ns

Subs

ea 7

Subs

ea N

orth

Tech

nip

Nor

ge

Tech

no D

ive

AS

TESS

as

Trel

lebo

rg O

ffsh

ore

Wire

scan

Subsea Engineering

Pipeline EngineeringTechnical services

Production services

Tree systems

Controls & MeasurementsSubsea facilities

SubseaprocessingSubsea power distributionTooling

Umbilicals & Cables

Risers, Flowlines & Tie-insSeabed surveys & Light intervention

Seabed installation

Pipelaying , Pipeline repairLight well intervention

Engineering & Technical Services

Subsea Production Systems

Umbilicals& Flowlines

Marine Operations, Intervention & Subsea Services

4

4 Su

bsea

ABB

AS

Aker

Sol

utio

ns

BAN

DAK

GRO

UP

Bred

ero

Shaw

Nor

way

AS

Clam

pOn

AS

Cran

emas

ter (

Erns

t-B.

Joh

anse

n AS

)

CRE8

Sys

tem

s AS

Deep

C

Deep

Oce

an A

S

DNV

GL

DOF

Subs

ea A

S

EMAS

AM

C

FMC

Tech

nolo

gies

FORC

E Te

chno

logy

Nor

way

AS

Freu

denb

erg

Oil

& Ga

s Te

chno

logi

es

Fugl

esan

gs S

ubse

a AS

Hite

c Pr

oduc

ts

IKM

Sub

sea

IKM

Tes

ting

AS

Inst

itute

for E

nerg

y Te

chno

logy

(IFE

)

KON

GSBE

RG O

il &

Gas

Tech

nolo

gies

MAR

INTE

K

Mul

ticon

sult

Nex

ans

Nor

way

AS

Nym

o

One

Subs

ea

Park

er M

ariti

me

PG F

low

Sol

utio

ns (I

ng. P

er G

jerd

rum

AS)

RAE

Ener

gy

Rein

erts

en A

S

Sand

vik

Rise

r Tec

hnol

ogy

AS

SEAB

OX

Siem

ens

Oil

& Ga

s Su

bsea

Sol

utio

ns

Subs

ea 7

Subs

ea N

orth

Tech

nip

Nor

ge

Tech

no D

ive

AS

TESS

as

Trel

lebo

rg O

ffsh

ore

Wire

scan

Subsea Engineering

Pipeline EngineeringTechnical services

Production services

Tree systems

Controls & MeasurementsSubsea facilities

SubseaprocessingSubsea power distributionTooling

Umbilicals & Cables

Risers, Flowlines & Tie-insSeabed surveys & Light intervention

Seabed installation

Pipelaying , Pipeline repairLight well intervention

5

4Subsea AS

4Subsea AS is a leading independent engineering company within subsea technology and renewable energy. Within subsea technology, the business objective is to develop and supply high-end services and solutions to the oil and gas industry with focus on flexible and rigid risers, and wellhead systems.

THE OVERALL ROLE OF 4SUBSEA: • Provider of independent specialist services

and solutions on flexible pipes, rigid risers and wellhead systems

• Caretaker of riser and subsea systems including supply of life cycle management systems and software solutions

• Provider of advisory systems for drilling and work-over riser operations

PRODUCTS:• Flexible riser and dynamic umbilical external

sheath repair system• Flexible riser annulus conditions monitoring

system• Flexible riser annulus repair clamp• Flexible riser motion monitoring system• Wellhead motion monitoring system• Drilling and work-over riser operational advisory

system• Tailor made riser monitoring systems• Tailor made flexible riser repair systems• Database solutions for collection, systemization

and use of design and operational data• Software solutions for online operational

support

SERVICES:Field development• Concept and FEED engineering on flexible riser

systems• Flexible riser system design and operational

guidelines

• Upheaval buckling and protection analysis of flexible pipes and tails

• Marine and work-over riser system engineering • 3. party verification of drilling and work-over

riser system design• 3. party verification of flexible flowline and riser

system Advanced engineering• X-section analysis of flexible pipes and

umbilicals• Fatigue analysis of drilling and work-over riser

components and wellhead systemsOperational support• Flexible riser annulus testing • Flexible pipe service life analysis including

service life extension• Flexible pipe dissection and failure investigation• Wellhead fatigue monitoring and analysis• Work-over riser operational envelopes • Operational data management and processing Software development• Web based database solutions built on

SharePoint, MS SQL server, Azure etc• Customized tools related to structural analysis,

measurement data and processingIntegrity management• Integrity management solutions and services

related to flexible riser and flowline systems

REFERENCES:Statoil, BP Norge, Norske Shell, ExxonMobil, Teekay PetroJarl, Framo Engineering, BW Offshore, FMC Kongsberg, Maersk Production

Contact person: Henning ChristensenTitle: Managing DirectorE-mail address: henning.christensen@4subsea.comCompany website: 4subsea.com

TECHNICAL SERVICESPRODUCTION SERVICES

SEABED SURVEYS & LIGHT INTERVENTION

6

ABB AS

ABB is a global leader in power and automation technologies that enable utility and industry customers to improve their performance while lowering environmental impact. Sustainability is integral to all aspects of our business. We strive to balance economic, environmental and social objectives and integrate them into our daily business decisions Technology plays a key role for ABB. We have activities all over the world working to develop unique technologies that make our customers more competitive, while minimizing environmental impact. ABB operates in more than 100 countries and has offices in 87 of those countries to give its global and local customers the support they need to develop and conduct their business successfully.

ABB Subsea SolutionsABB is an innovator in subsea solutions and has been involved in the development of subsea equip-ment and systems for many years. Feasibility studies on subsea components began in 1984, and the first commercial subsea transformer was delivered in 1998. Since then, ABB has delivered variable speed drive systems and transformers to some of the largest and most advanced offshore developments in the world.We will continue to support our customers’ long-term sustainable development by providing subsea power that go deeper and longer, and reli-able commmunication, monitoring and control for future subsea factories.

Subsea power solutionsABB is a leading supplier of power solutions to the oil and gas industry and offers a range of special-ized electric power systems, drives and service for critical subsea production equipment.Producing oil and gas from reservoirs located at long distances from land is a costly proposition that presents many challenges to offshore opera-tors. Subsea installations situated far from shore or remote platforms can be a very cost-efficient solution, as it may eliminate the need for a fixed or floating topside installation. To help operators achieve efficient electric power supply and control at long step-out distances, ABB offers total subsea power solutions with highly developed electrical products and associated services tailored for subsea production applications.

Why ABB?• We are an innovator in subsea power solutions

and have been involved in the development of subsea equipment and systems for many years

• Our studies on subsea components began in 1984• We delivered the first commercial subsea trans-

former in 1998• We have delivered more than 20 subsea trans-

formers to the industry

Subsea automation25+ years of experience with subsea control systemsIn the past few decades, ABB has developed a close relationship with the major subsea suppliers worldwide. Our systems support all the available subsea interfaces, such as FMC 722 from FMC Technologies, Modbus TCP from Aker Solutions and GE Vetco Gray, etc. We have delivered 46 subsea topside control system since 1986 and many more subsea modifications on existing subsea topside control systems. With more than 25 years’ experience with subsea systems, ABB is committed to our customer to provide secure, reliable and flexible subsea auto-mation solutions meeting all operational needs – today and in the future.

Tomorrow’s subsea solutionsToday, oil and gas processing and power supply are based on installations on platforms or floaters. This topside set-up not only impacts the environ-ment, but also needs many cables for power transmission and distribution, and requires strict human safety procedures. Besides, this set-up limits step-out distance. For reservoirs with long step-out distance, powering the subsea factories is not an easy task. With ABB’s new subsea AC solution, the power can be supplied up to 200 kilometers from shore with just one cable using standard 50/60 Hz solutions. Using low frequency AC solutions can increase the step out distance to around 400 kilometers, with power up to 100 MW output to support the subsea factories on the seabed. With the powerful electrical source, the factories on the seabed will achieve stable produc-tion, extending the feasibility of the field.

Contact person: Rita-Wei FuTitle: Marketing Support for Subsea ProgramE-mail address: rita-wei.fu@no.abb.comCompany website: abb.com/oilandgas

SUBSEA ENGINEERINGTECHNICAL SERVICESPRODUCTION SERVICES

CONTROLS AND MEASUREMENTSUBSEA POWER DISTRIBUTION

UMBILICALS & CABLES

7

Aker Solutions

Aker Solutions is a global provider of SURF design and engineering, products, systems and services to the oil and gas industry. We offer the industry’s most complete portfolio of differentiated subsea technologies with a global manufacturing and service infrastructure.

Aker Solutions is at the forefront of key technolo-gies that drive future field developments. Our subsea processing and boosting solutions are paving the way for exploring deeper waters, complex reservoirs, harsher fluids and longer step-outs. A great deal of our energy is spent focusing on HSE, quality and our people – the three greatest assets of our organization.

Our expertise is the result of our long track record in the SURF industry, our involvement with a wide range of ambitious and professional customers, and the challenges that we have faced and solved together.We understand the challenge, apply the knowledge and create and use technologies to provide the products, systems and services that deliver solu-tions to customers. This is ingenuity delivered.

SURF ENGINEERINGAker Solutions has an extensive portfolio of SURF projects with a range of technical requirements to optimize field architecture, and life and production profile for our customers.

We offer complete SURF engineering, including flow assurance, subsea infrastructure design and tech-nical analysis of all relevant systems. These tasks cover all phases from screening and feasibility, through FEED and for most cases also systems and detail design. For the benefit of our customers we will early in the design process establish a system design that enhances the development scheme.

SUBSEA PRODUCTS Aker Solutions provides a comprehensive portfolio of technologies, systems and services:• Control systems• Intervention and workover systems (x-vendor)• Manifolds and structures• Power and process systems• Subsea pumps • Subsea trees (vertical and horizontal)• Well heads• Tie-in connection systems (vertical and

horizontal)• Umbilicals, power cables and direct electric

heating• HP drilling, production and workover risers• Flow assurance-, global riser- and advanced FE

analyses

LIFE OF FIELD Through our regional service bases and central support we can deliver globally integrated subsea lifecycle services including:• Installation and commissioning of systems• Maintenance, repair and spares supply• Refurbishment and recertification• Operational and technical support• Asset integrity management services• Condition monitoring

Computer rendering of Åsgard Subsea Compression Station

A new generation of workover riser - The riserLOCK™ 7.10

SUBSEA ENGINEERINGPIPELINE ENGINEERINGTECHNICAL SERVICESPRODUCTION SERVICES

TREE SYSTEMSCONTROLS AND MEASUREMENTSUBSEA FACILITIESSUBSEA PROCESSINGSUBSEA POWER DISTRIBUTIONTOOLING

UMBILICALS & CABLESRISERS, FLOWLINES & TIE-INS

Contact person: Jan Gunnar Waalmann Title: Technical BDE-mail address: jan.gunnar.waalmann@akersolutions.comCompany website: akersolutions.com 8

BANDAK GROUP

BANDAK GROUP supplies engineering services, manufacturing and deliveries for world-leading players within oil & gas, maritime and other industries. Our customers demand the highest level of quality, precision, on time delivery and cost competitiveness in all deliver-ies. Bandak Group represents strong competence within engineering and high precision machining, combined with comprehensive assembly and testing facilities. Bandak Group includes 530 competent and skilled employees, all sharing the same core values – to be genuine, courageous, accountable and respectful.

PRODUCTS:Development of Client Products in the Offshore Marine Market:Module Handling Towers, ROV Launch & Recovery Systems (LARS), Deck Hatch Designs, Marine propulsion, Structural Integration in Vessel, test jigs and lifting/transport frames, LNG technology, Taut Wire System

Development of Client Products in the Oil & Gas Subsea Market:Large subsea structures, subsea valves, connection products, thermal insulation caps, high pressure caps w/metal seals, cleaning tools, stroking tools, XT tools, mechanical leveling jacks for large subsea structures, vertical connection w/swan necks.

Development of BANDAK Products, complemen-tary to client products in the Oil & Gas Subsea Market:

• Torque Tools (200 kNm – 800 kNm) for large subsea ball valves

• Pressure & Protection Caps• Transport & deployment skids• Soft Landing Cylinders• Levelling Jacks for subsea structures• Valve & Metallic Seal Technology• Bolt Make Up Tool for flanges

Development of client products in the Renewable Energy Market:Tidal Turbines, seals for hydropower ball valves

SERVICES:• Engineering

· Product development· Design & Analysis· Subsea & Marine Engineering· Mech. & Structural Engineering· Third Party Verifications

• Machining· CNC milling & Turning· Grinding & Bucking services

• EPC-deliveries · Pipeline products· Rotary tables for XT and Swivels· Swan necks w/ vertical connection

• Welding· Structural welding· Clad-welding

• Surface Engineering· HVOF· PTA & Plasma Spraying

• Assembly & Testing· Excellent crane facilities· Total assembly area 2000m²· Large Seawater Test Pit· Thermal cool-down test facilities· Load Test & drop test· Functional and qualification testing

SELECTED REFERENCES:Statoil, FMC Technologies, Aker Solutions, GE Oil & Gas, Rolls-Royce Marine, Aibel, Technip, Hammerfest Strøm, Kongsberg Maritime, Ulmatec, Seaonics.

SUBSEA ENGINEERINGPIPELINE ENGINEERINGTECHNICAL SERVICES

SUBSEA FACILITIESTOOLING

RISERS, FLOWLINES & TIE-INS

Contact person: Geir Olav RyntveitTitle: SVP Group Sales & MarketingE-mail address: Geir.Olav.Ryntveit@bandakgroup.com Company website: bandakgroup.com 9

Bredero Shaw Norway AS

Bredero Shaw is the global leader in the development and manufacture of pipe coating solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of experience, over 27 pipe coating facilities on 6 continents and the largest team of techni-cal and service specialists in the business. Bredero Shaw offers technologically advanced solutions for anti-corrosion coatings, protective and weight coatings, thermal flow assur-ance coatings, internal coatings, custom coatings and field joints for both onshore and offshore applications.

PRODUCTS:Our product range for Offshore Pipelines, Field Joint and Subsea structures are: Anti Corrosion Coatings, Concrete Weight Coating, Thermal Insulation and Internal coatings.

SERVICES:Bredero Shaw understands the offshore environ-ment and is capable of providing complete coating solutions on a global basis. As the leader in off-shore pipe coating solutions, the company offers many advantages including:

• Complete solutions for all applications including anti-corrosion protection, thermal flow assur-ance, protective and weight coating, internal flow efficiency and custom coating

• A wide array of coating solutions ranging from small diameter flowlines and risers to large diameter transmission lines. The company has coated pipelines for the most diverse depth, environment and installation conditions.

SELECTED REFERENCES:Bredero Shaw has supplied services to all major offshore markets in the world and some key projects are:Åsgard, Kristin, Tyrihans, Gjøa, Mars, Europa, Madison, Marshal, Thunderhorse, Skarv, Pluto, Bonga, Pazflor, Kizomba, Oseberg, Ormen lange, Langeled, Blind Faith, Block 31, Mafumeira Sul, In-Salah, Goliat, Skuld, Visund Sør/Nord, Svalin, Åsgard Subsea Compression, Vigdis, Tordis Replacement

Company name: Bredero Shaw Norway AS Contact person: Eirik Simonsen Title General Manager/VP Global Flow Assurance E-mail address: esimonsen@brederoshaw.com Company website: www.brederoshaw.com COMPANY DESCRIPTION: Bredero Shaw is the global leader in the development and manufacture of pipe coating solutions for the oil, gas, and water industries. Bredero Shaw has more than 75 years of experience, over 27 pipe coating facilities on 6 continents and the largest team of technical and service specialists in the business. Bredero Shaw offers technologically advanced solutions for anti-corrosion coatings, protective and weight coatings, thermal flow assurance coatings, internal coatings, custom coatings and field joints for both onshore and offshore applications.

PRODUCTS: Our product range for Offshore Pipelines, Field Joint and Subsea structures are : Anti Corrosion Coatings, Concrete Weight Coating, Thermal Insulation and Internal coatings. SERVICES: • Bredero Shaw understands the offshore environment and is capable of providing complete coating solutions on a global basis.

As the leader in offshore pipe coating solutions, the company offers many advantages including: • Complete solutions for all applications including anti-corrosion protection, thermal flow assurance, protective and weight

coating, internal flow efficiency and custom coating • A wide array of coating solutions ranging from small diameter flowlines and risers to large diameter transmission lines. The

company has coated pipelines for the most diverse depth, environment and installation conditions.

REFERENCES: Bredero Shaw has supplied services to all major offshore markets in the world and some key projects are:

Linepipe  and  Field  Joint  Insulation  for  Reeling   Linepipe  and  Field  Joint  Insulation  for  S-­‐lay   Linepipe  Insulation  

Portable  plant  technology   Custom  Coating  for  Anode  joints   Concrete  Weight  Coating  

Insulation  of  Valve  body  in  Polypropylene   Insulation  of  Tie-­‐Inn  connector   Insulation  of  Bends  

RISERS, FLOWLINES & TIE-INS

Contact person: Snorre Lillesand (+47) 959 44 004Title: BD and Commercial ManagerE-mail address: slillesand@brederoshaw.comCompany website: brederoshaw.com

Bredero Shaw has supplied services to all major offshore markets in the world and some key projects are:

10

ClampOn AS

ClampOn is a leading manufacturer of topside and subsea, non-invasive Ultrasonic Intelligent Sensors for; sand/particle monitoring, PIG detection, corrosion-erosion monitor-ing, vibration monitoring, leak monitoring and condition monitoring. All products are based on the same well proven technology platform. Both the topside and subsea instruments incorporate Digital Signal Processing and complete digitalization. All products are non-intrusive and clamped to the pipe/structure. The sensors processes all data in the sensors itself (patented principle). Focusing on core technology has enabled us to sell user-friendly, cost-effective products to customers all over the world and the leading edge technology has made ClampOn capable and competitive in offering the products that the customers are looking for. ClampOn seeks the solutions of tomorrow in order to serve our customers – we want to be your very best supplier: Always Numero Uno.

PRODUCTS:Corrosion-Erosion MonitorVibration MonitorSand/Particle MonitorPIG DetectorLeak monitorWell Collision DetectorCondition Monitor

SERVICES:Real-time monitoring of: • Changes in wall thickness

• Vibration on subsea structures/manifolds• Sand in production lines• Valve leaks• Pigs in pipelines

SELECTED REFERENCES:Worldwide operators and engineering companies(Chevron, ConocoPhillips, Shell, Total, BP, Statoil,ExxonMobil, Nexen, ENI, Dong, Woodside, Saudi Aramco, Aker Solutions, FMC, Cameron, GE i.e.) For additional information please contact us.

Subsea Corrosion-Erosion Monitor (CEM®) Pre-installable

version, first picture showing the CEM without insulation, second

picture, CEM with insulation. Third picture: Subsea Vibration

Monitor, stand alone version.

CONTROLS AND MEASUREMENT

Contact person: Tonje DahlTitle: Marketing & Communications ManagerE-mail address: tonje.dahl@clampon.comCompany website: clampon.com 11

Cranemaster (Ernst-B. Johansen AS)

The business of Cranemaster and Cranemaster technology is reduction of forces in offshore lifting operations originating from wave motions. These reductions are based on passive heave compensation and shock absorption. Clients worldwide have been able to increase the operational weather window for lifting operations at sea since 1983 using Cranemaster products.We have a large rental fleet for lifts up to 1200 Ton ready for immediate dispatch. In addition, we develop units tailor-made to clients specifications and provide engineering services related to lift analysis.

COMMON APPLICATIONS: • Increase offshore crane lifting capacity• Reduce DAF in offshore lifts• Increase weather window for splash-zone

crossing• Remove possibility for resonance during subsea

lowering operations• Reduce landing speed and motion for subsea

installations• Protect the crane/winch during subsea recovery

and decommissioning operations• Load tensioning for air or subsea installations• Protect equipment or personnel from shock loads

PRODUCTS:• Cranemaster units for rental with load range

from a few tons up to 1200 tons.• Special designed units for sale or rent.

SERVICES:Lift analysis. Cranemaster has significant expertise in lift analysis and planning. Analysis is conducted with Orcaflex and/or own developed software for all lifting phases.

REFERENCES / GLOBAL CONTACTS:Cranemaster - Ernst-B.Johansen AS is today the world leader in its field with a client roster rang-ing from small diving companies to most of the world’s largest marine contractors for oil, gas and renewable energy.During 2013 and 2014 Cranemaster Technology was used by Chevron and Subsea 7 on the Gorgon and Janz field in Australia for installation of 20 structures with rigging weight up to 1000 ton and installation depth down to 1300 meters. This represents the world record for load in heave compensated lifting operations.

SEABED INSTALLATION

Contact person: Kristian HellandTitle: Product ManagerE-mail address: kristian@cranemaster.noCompany website: cranemaster.no12

CRE8 Systems AS

CRE8 is an innovative and quality-oriented engineering company designing, manufacturing and assembling Electro/Hydraulic Control systems for the oil and gas industry.

PRODUCTS:CRE8 is a key partner with an unrivalled level of service and support to our customers within engineering and production of Electro/Hydraulic systems and services for both Topside and Subsea applications.

Typical Products:• Intervention & Workover Control Systems• Hydraulic Power Units• Subsea Control Modules Test Stand• Wellhead Control Panels• Local Control Panels• Test & Flushing HPU• Hydraulic & Electric Distribution Panels• Hydraulic Termination Panels• X-mas Tree Instrumentation• Umbilicals incl. Stab Connection Plates• Hydraulic Accumulation Units

SERVICES:CRE8 deliver innovative new technology to the market and is directly contributing to the success of our customers objectives by using standardised and modular technology. Our team has worked together for many years and is capable of execut-ing the most complex systems within our line of business and our expertise includes:

• HSE-QA• Engineering and Studies• Design, Lay-out, Structural Calculations• Project Management• Supply Chain Management• Production Facilities• Testing Facilities• Courses, Training• Commissioning

SELECTED REFERENCES:The CRE8 team is within it`s area the most expe-rienced in Norway and have references to most of the large international Engineering and Oil & Gas Companies.

TREE SYSTEMSCONTROLS AND MEASUREMENT

Contact person: Morten BøgildTitle: CEOE-mail address: morten.bogild@cre8.noCompany website: cre8-systems.com 13

Deep C

Deep C is a seabed intervention specialist, providing superior turn key solutions to meet the needs of even the most demanding projects. Our capabilities are successfully demon-strated through an impressive track record. Being a specialist, means that Deep C offers solutions which combine the best of seabed intervention technologies, operational know-how and in-depth engineering experties.

PRODUCTS:• Deep C Subsea Utility Vehicle

· Versatile and powerful tracked vehicle for dredging, subsea HP jetting, inspection and subsea tooling operations

• Mass Flow Excavation· Deep C Blower· Deep C Jumbo Dredge

• Dredging & Trenching· ROV Trenching· ROV and diver operated dredges

• Cutting & Jetting· Diamond wire cutting· Subsea HP Jetting solutions

• Equipment tool pool· An extensive rental tool pool of ROV tooling

and subsea equipment

SERVICES:• Seabed Intervention

· Levelling and precision dredging· Rock dump Removal· Umbilical trenching· Free span rectification· Spudcan preparations· Boulder removal· Drill cut transportation· High pressure jetting

• Engineering· Geotechnical assessment· Remote intervention technology· Operational procedures and methods· Design and fabrication

REFERENCES:Shell, Subsea 7, Technip, EMAS, Saipem, Deep Ocean, DOF Subsea, Bibby Offshore, Harkand Group, Reach Subsea, Canyon Offshore, Nexans

SEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYING, PIPELINE REPAIR

Contact person: Odd Gustav KvalvågTitle: Managing DirectorE-mail address: ogkvalvag@deepcgroup.comCompany website: deepcgroup.com14

DEEPOCEAN AS

DeepOcean is an integrated provider of safe, high quality, innovative services and technolo-gies for the subsea industry. Demonstrating an extensive track record, DeepOcean offers a breadth of subsea services, including (a) Inspection, Maintenance, Repair and Replacement (IMR2), (b) Survey and Seabed-mapping, (c) Subsea Installation (SURF), (d) Seabed Intervention, and (e) Decommissioning.

DeepOcean’s competitive edge lies in our ability to provide the best combination of personnel, experi-ence, and suitable assets to solve Customer’s subsea challenges.

This strong portfolio of services, coupled with a fleet of 17 owned and chartered vessels and an extensive mission equipment portfolio comprising of 36 ROVs, 2 AUV, 16 trenchers, 3 Module Handling Systems, 1 geotechnical drilling rig and several dredging and excavation systems, enables DeepOcean to bundle its subsea services to deliver cost-effective, tailored solutions to meet individual client needs.

The company is a leading IMR Contractor and trenching operator in the Greater North Sea, and build on our extensive experience to increase our capacities in the SURF installation and construc-tion services. DeepOcean has to capacity for installation of umbilicals, fibre optics, risers and reelable pipeline products to our fleet.

Having its origins in the North Sea, the company now operates on a global basis and has secured work in the North Sea, Mediterranean, West Africa, Brazil, Southeast Asia and Gulf of Mexico.

PRODUCTS:DeepOcean provide subsea installation and ROV based remote subea services from specialized subsea support vessels.

Projects include provision of full project man-agement, operational planning, engineering,

fabrication, mobilization/demobilization, offshore crew and have the overall responsibility through-out the projects.

SERVICES:We provide extensive engineering and design support for the planning and execution of offshore and subsea operations in deep water down to 3000 meters. Key to our successful subsea teams is international experience combined with a good local knowledge and ability to adapt to new challenges.

Service range include; • Project Management and engineering • Pipeline and structural inspection • Seabed mapping • Lay support • Subsea maintenance and repair • Seabed intervention – (trenching, ploughing,

dredging) • Subsea Umbilicals Risers and Flowlines (SURF)

installation • Installation and construction support • Subsea decommissioning

REFERENCES:DeepOcean has established itself as a prudent subsea contractor and gained extensive experi-ence and strong reputation for our services among major international oil and gas operators.

Experience include stand alone subsea projects to long term multi scope frame contracts for subsea services.

PIPELINE ENGINEERING

SEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYING, PIPELINE REPAIR

Contact person: Bjorn Inge StaalesenTitle: Group Marketing ManagerE-mail address: BStaalesen@deepoceangroup.comCompany website: deepoceangroup.com 15

DNV GL

Driven by our purpose of safeguarding life, property and the environment, DNV GL enables organizations to advance the safety and sustainability of their business. Operating in more than 100 countries, our 16,000 professionals are dedicated to helping our customers in the maritime, oil & gas, energy and other industries to make the world safer, smarter and greener.

In the oil and gas industry, DNV GL enables safe, reliable and enhanced performance in projects and operations. We provide integrated services in technical and marine assurance and advisory, risk management advisory and offshore classifica-tion. Our 5,500 people combine industry expertise, multi-disciplinary skills and innovation to solve complex challenges for our customers. Together with our partners, we drive the industry forward by developing best practice and standards across the asset lifecycle.

PRODUCTS:Rules, Standards and Recommended Practices:DNV GL has developed rules and standards for ships for more than 140 years, and is a world lead-ing classification society. We also develop rules and standards for the oil and gas industry: DNV / DNV GL Standards such as DNV-OS-F101, DNV-OS-F201 & DNV Rules for Planning and Execution of Marine Operations as well as associated Recommended Practices.

Software:DNV GL is a leading provider of software for managing risk.

SERVICES:Verification and Certification: We ensure our customers’ projects are effectively managed through transparent, risk-based verification and certification.SHE Risk Management: We develop, implement, maintain and continuously improve best practices within SHE management.Technology Qualification: We provide confidence that technology will function reliably.Asset Risk Management: We safeguard integrity and maintain optimal production safely and cost-efficiently.Enterprise Risk Management: We provide a com-plete view of an organisation’s total risk exposure and help manage these risks in an integrated way.

Subsea services: Qualification of new technol-ogy, performance assurance, verification, quality surveillance, certification of material and compo-nents, integrity management, lifetime extensions and requalification, fatigue failure and laboratory testing, risk assessment and risk management, flow assurance and sand management.

Drilling and well services: Qualification of new technology, verification, quality surveillance, integrity management, lifetime extensions and requalification, independent design analyses, fatigue failure and laboratory testing, risk assess-ment and risk management.

Pipeline & Risers services: Design verification, independent design analyses, installation analy-ses, quality surveillance, integrity management, lifetime extensions and requalification, certification of material and components, qualification of new technology, fatigue failure and laboratory testing, flow assurance and sand management.

Marine Operations verification, review, independent analysis and warranty approval of marine operations.

REFERENCES:Our customer portfolio ranges from major oil companies such as Statoil, ConocoPhillips, Shell, Total, and BP to major offshore contractors and ship owners.

Some of our project references are:• Nordstream (Nordstream AG)• Åsgard subsea compression (Statoil)• Well integrity (JIP)• Valemon (Statoil)• Snorre 2040 (Statoil)• Ekofisk (ConocoPhillips)• Gjøa (Statoil)• Tyrihans (Statoil)• Statefjord latelife (Statoil)• Integrity Management Recommended Practice

(JIP)• Lined and Cladded Pipelines Recommended

Practice (JIP)

SUBSEA ENGINEERINGPIPELINE ENGINEERINGTECHNICAL SERVICES

Contact person: Bjørn Søgård Title: Senior Principal EngineerE-mail address: bjorn.sogard@dnvgl.comCompany website: dnvgl.com16

DOF Subsea AS

DOF Subsea is a leading provider of integrated subsea solutions to the offshore oil and gas industry around the world. Headquartered in Bergen, the company owns and operates one of the largest global fleets of high-specification vessels, dive systems and ROVs, providing specialist survey, subsea construction and inspection, repair and maintenance services worldwide.

Our fleet currently stands at 23 owned, and 5 long-term chartered offshore construction vessels, 56 ROV systems including 1 AUV/IIV system, and 10 diving spreads, with a further 12 ROVs and one AUV on order.With close to 1,700 employees worldwide, DOF Subsea has a skilled and experienced team who provide clients with a world-class capability to deliver project managed and engineered subsea solutions. Our team’s ability to match services, expertise, and equipment to the requirements of individual operations underpins our reputation for safe, efficient and cost effective project delivery. We have centres of operation in the North Atlantic, Gulf of Mexico, Brazil, Asia, Mediterranean and West Africa with a skilled team including engineering, project personnel, and marine crew.

Further info on: www.dofsubsea.com

PRODUCTS:Subsea Engineering, Advanced Analysis, Engineering and FEED Studies, Tool Development, Subsea installation and operational services from owned and operated vessels. Project

management, engineering, and fabrication. ROV/ROTV operation, AUV & survey operation and processing of data during vessel operation. Final reporting, inspection and project close-out reports.

SERVICES:• IRM• Mooring design and installation services• Seabed survey• Subsea metrology• Pipeline and structure inspection• Module Handling• ROV and intervention services• Diving and intervention services• Construction support• Subsea engineering• EPCI Contractor services

SELECTED REFERENCES:DOF Subsea has a long, proven track record with all major oil companies and offshore contractors worldwide. Main Clients are Shell, Total, Petrobras, ExxonMobil, Statoil, BP, ENI, ConocoPhillips, Subsea 7, Technip, Heerema Marine Contractors.

SEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYING, PIPELINE REPAIR

Contact person: Gert Juel RasmussenTitle: Business Acquisition DirectorE-mail address: gert.juel.rasmussen@dofsubsea.comCompany website: dofsubsea.com 17

EMAS AMC

EMAS AMC is a specialized subsea installation and marine services company with differen-tiated assets, delivering integrated solutions to the offshore energy industry worldwide.

PRODUCTS:• SURF (EPIC) • Cable installation• Floater and FPSO Installation • Pipelay and Heavlylift• Floatover Installation• Decommissioning and Removal

SERVICES:EMAS AMC has a proven track record of laying pipelines, cables and umbilicals, including coated carbon steel pipelines and bundled applications. In-house engineering resources provide complete design, analysis and installation support, comple-mented by a modern and versatile fleet of rigid S-lay, flexible and reel lay construction assets.

Through strategic supply chain partners, EMAS AMC provides engineering, procurement, installa-tion and construction support for subsea umbili-cals, risers and flowlines. With a long history of success, we strive to deliver best-value solutions with a diverse offering of assets, services and engineering designed to fully meet our client’s need. As part of the EMAS Group, a leading global offshore contractor providing con-struction, marine, production and well intervention services, we are well positioned to take on the most advanced and complex projects.

SELECTED REFERENCES:Please see our website www.emas.com for further details.

PIPELINE ENGINEERING

SEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYING, PIPELINE REPAIR

Contact person: Halvor TveitoTitle: Vice President Commercial E-mail address: halvor.tveito@emas.comCompany website: emas.com18

FMC Technologies

FMC Technologies, Inc. (NYSE: FTI) is the global market leader in subsea systems and a leading provider of technologies and services to the oil and gas industry. We help our customers overcome their most difficult challenges, such as improving shale and subsea infrastructures and operations to reduce cost, maintain uptime, and maximize oil and gas recovery. Named by Forbes® Magazine as one of the World’s Most Innovative Companies in 2013, the company has approximately 20,000 employees and operates 28 production facilities in 17 countries.

Subsea Systems: We are the world’s leading provider of subsea systems. Our goal is to help customers push the limits of offshore production with subsea processing systems that increase oil recovery from mature fields and enable the development of new ultra deepwater fields. We also engineer our traditional production systems to reduce installation and maintenance costs along with providing field service support that minimizes operational costs.

PRODUCTS:FMC Technologies is the leading manufacturer and supplier of subsea production systems, including wellheads, subsea trees, controls and manifold and tie-in systems. In addition, FMC Technologies offers engineering and customer support services, such as system engineering, flow assurance, flow measurement and project management.

SERVICES:FMC Technologies provides a complete range of services for any subsea production system. Our overall mission is to reduce the cost of a subsea system and its service needs.

REFERENCES:Please visit our website www.fmctechnologies.com to see an overview of our Global Subsea Projects. Categorized by region, this page also features key regional projects that have led to our global success.

SUBSEA ENGINEERINGPRODUCTION SERVICES

TREE SYSTEMSCONTROLS AND MEASUREMENTSUBSEA FACILITIESSUBSEA PROCESSINGTOOLING

LIGHT WELL INTERVENTION

Contact person: Haakon HelgesenTitle: Director Sales & MarketingE-mail address: haakon.helgesen@fmcti.comCompany website: fmctechnologies.com 19

FORCE Technology Norway AS

FORCE Technology offers varied advanced solutions within oil and gas, focusing primarily on servicing the offshore industry.

PRODUCTS:• Advanced sensor technology• Online riser & pipeline monitoring systems• Corrosion protection systems • Corrosion modelling software• Advanced inspection and verification products

and systems• Customised software solutions• Maritime simulator systems

SERVICES:FORCE Technology participates and provides technology and services from feasibility studies to decommissioning.

Our highly skilled engineers and service teams provide the following:• Structural design, verification, analysis, model-

ling and calculation services• Riser analyses and predictive modelling• Corrosion and inspection management• Maintenance planning• Cathodic protection design and modelling• Cathodic protection inspection and management

• NDT and advanced subsea inspection• Historical and predictive modelling of fatigue

processes• Pipeline integrity management and services• Hydro- and aerodynamic optimisations• Simulator systems (SimFlex)• Onboard systems (itinerary planning, fuel opti-

misation etc.)• Harbour layout consultancy• Wind loads and dynamics of buildings and bridges• Air pollution and emission reduction• Co2 statements and reduction studies• Verification and calibration of equipment and

references within volume, density, flow, tem-peratur, force, pressure and torque

• Polymers – consultancy, analysis and characterization

• Surface characterization and analyses• Material analyses• Destructive testing and damage investigations• Training and certification

REFERENCES:Provided upon request.

PIPELINE ENGINEERING TECHNICAL SERVICES

Contact person: Bjarne T. JensenTitle: Sales & marketing manager E-mail address: bzj@force.noCompany website: forcetechnology.com20

Freudenberg Oil & Gas Technologies

Freudenberg Oil & Gas Technologies (FO&GT) is a global solutions provider of innovative seal solutions and differentiated seal products to the global oil and gas industry. The company is focused on the exploration and production (upstream) segment, and acquired Vector Technology Group in January 2013. Our 620 associates serve a wide range of cus-tomers including oil and gas producing companies, original equipment manufacturers (OEMs) and engineering and service companies that provide technologies, equipment and services for producing oil and gas from land based and offshore platforms throughout the world.

The Vector products and sealing technology are used in some of the most demanding applica-tions in oil and gas, including: offshore oil & gas platforms, FPSOs, refineries, riser and swivel applications, flowlines and subsea installations, and chemical and petrochemical plants. Featured products are the SPO Compact Flange, the TECHLOK Clamp Connector and the ROV-operated OPTIMA Subsea Connector. Freudenberg Oil & Gas Technologies has locations in Australia, Brazil, Canada, Malaysia, Norway, Singapore, the UK, the United Arab Emirates and the US.

A BROAD INDUSTRY KNOWLEDGEFreudenberg Oil & Gas Technologies’ high level of technical expertise, broad industry knowledge and problem solving capabilities have earned industry wide recognition, helping to build close working relationships with customers whilst delivering high quality products and customised solutions on-time. In-house capabilities include; raw material stock, manufacturing facilities, coating, NDT and metrology equipment, pressure and hydro testing as well as complete pressure, bending and torsion testing facilities. In combination with an efficient supply chain FO&GT is able to deliver both flexible and fast track deliveries in addition to executing larger projects. Its products cover pressure classes up to 15,000 psi and have a proven track record within High Pressure / High Temperature and harsh environment applications where fatigue, high bend-ing and stress loads are of primary importance.

COMMITMENT TO CONTINUOUS IMPROVEMENTFreudenberg Oil & Gas Technologies is committed to designing and manufacturing the safest and most efficient sealing and pressure containment technology in the market. Setting HSEQ as the highest priority throughout a project, core focus is on product quality and development, the recruitment and retention of highly trained and competent personnel, continuous improvement and product installation support. In addition to its commitment to safety, reliability and technological development, FO&GT continuously aims to excel in order to meet or surpass its client’s expectations.

PRODUCT SUPPORTGood quality products need proper support. Accordingly we offer the following services:• Training courses including: Introduction,

Handling & Protection, Assembly/Disassembly, Bolting and Damage assessment

• Dimensional Inspection at customer’s locations or at FO&GT premises

• Leak Investigation: FO&GT can help by giving an assessment of leaks, and solving the leak issues

• Damage assessment & repair management• Leak Reduction Initiative: Supervising during

Fabrication, Construction and Commissioning with respect to leak reduction. Reducing leaks and creating significant time saving, due to the reduction of repairs and modifications

RISERS, FLOWLINES & TIE-INS

Contact person: John ArnesenTitle: Business Development ManagerE-mail address: John.Arnesen@fogt.comCompany website: fogt.com 21

Fuglesangs Subsea

Fuglesangs Subsea AS was created as a subsea technology spin-off from Fuglesangs AS (est. 1916). The subsea company builds on the former parent’s more than 33 years’ experi-ence working with challenging pumping and sealing applications in the subsea, mining, offshore, naval submarine and specialty process markets. The company has a strong team and a dedicated HSEQ culture.

Our core business is supplying cost-effective, compact and highly robust pumps that are designed to avoid leakage-to-sea and function independently of any topside support system (“topside-less”).

We have delivered several subsea pumps to date, of which more than 20 pumps are in active use in the deep seas. Our involvement in subsea pump qualifi-cation projects includes the participation of a variety of oil service companies and western oil majors.

One of the key projects involves the world’s first seal-less subsea process pump, Magrise®. End users involved in qualifying this pump include Statoil, Total, Shell & Chevron.

PRODUCTS:Key markets and applications include: • Subsea excavation: Deepsea dredging, trench-

ing, mining & decommissioning• Subsea drilling: Deepsea cuttings transport,

drilling mud return, and drilling mud pressure control

• Subsea process: Single & multiphase boosting, chemical injection, water injection, active cool-ing, filtration

Brand names:OMNIRISE™ - Subsea Seal-Less & Topside-Less pumps for subsea boosting and injectionMAGRISE™ - Subsea Seal-less & Topside-less pumps for active cooling and circulation applications

MUDRISE™ - Subsea mud & slurry pumps for mud-return, deep sea slurry and subsea miningSEARISE™ - Subsea seawater pumps for dredging, trenching and ejector applications

SERVICES:Engineered pump solutions to fit the client’s need is our specialty. We also provide services including process and dynamic analysis.

We engineer both positive displacement and cen-trifugal pumping systems for subsea. Often, our starting point is often already proven technology. We subsequently improve the weak links system-atically in existing solutions, typically related to sealing, bearings, material science, thermal and lubricating systems.

Our core competencies include: • Marinization – Making equipment robust and

reliable in the deep oceans• Material science• Finite Element Analysis• Thermodynamics• Rotodynamics• Computational Fluid Dynamics• Tribology

REFERENCES:Kongsberg Oil & Gas Technologies OceaneeringX-Subsea 2 Major European Oilfield & Offshore Drilling Systems Vendors

SUBSEA PROCESSINGTOOLING

Contact person: Alexander FuglesangTitle: Chairman & CEO E-mail address: awf@fsubsea.comCompany website: fsubsea.com22

Hitec Products

Hitec Products AS’ main business areas are high quality Electro-Hydraulic control systemsand Chemical Injection to the Oil & Gas Industry. We are organised in four divisions; TOPSIDE SYSTEMS, SUBSEA SYSTEMS, OILFIELD SYSTEMS and CUSTOMER SUPPORT. We are a project oriented organisation and our employees have a culture for succeeding and exceeding our clients expectations. Our production facilities are in Stavanger, Sandnes, Forsand and Singapore, including a deepwater quay and facilities for large module assembly. We are also present in Telemark, Norway and Lowestoft, UK with sales and engineering offices.

PRODUCTS:Highly innovative electro-hydraulic control and chemical injection systems with a modular and standardized approach in design. We have high focus on user interface and safety. Our systems include:• IWOCS - Installation Workover Control Systems

with HPU• Operator Control Room for Workover Systems• HPU - Production / Subsea Hydraulic Power

Units, Ballast HPU, Wellhead HPU, Drilling HPU• TFHPU Test & Flushing Hydraulic Power Units• SCMTS – Subsea Control Module Test Stand• TUTU – Topside Umbilical Termination Unit• WHCP – Wellhead Control Panel• CIU – Chemical Injection unit• MIU – MEG / Methanol Injection Unit• FCP w/IRCD – Flow Control Panel w/ Injection

Rate Control Device• LCP – Local Control Panels• Instrumentation for Xmas trees• Accumulator Packages

SERVICES:Hitec Products assists in all stages of your project, including FEED assistance, Project managementEngineering & Design, 3D modeling and real life prototyping, procurement, manufacturing and testing. Our production facilities are in Stavanger, Sandnes, Forsand and Singapore, including a

deepwater quay and facilities for large module assembly. We are also present in Telemark, Norway and Lowestoft, UK with sales and engi-neering offices.Our Customer support centers are dedicated to providing the necessary service and solutions to ensure immediate and long term satisfaction to clients worldwide.Our staff is service oriented and has the neces-sary skills and know-how to solve our clients challenges.Our support bases are in Stavanger and Singapore and can offer:

SPARE PARTS• Life Cycle Support• Commission and Installation• Testing and flushing• Surveys & Inspection• Modification and Maintenance• Service and re-certification• Xmas Tree Instrumentation

REFERENCES/GLOBAL CONTACTS:We at Hitec Products have enjoyed working with our clients on more than 1000 projects. Our clients include the major oil companies, smaller indepen-dent oil companies and engineering companies, as well as key players in the subsea, oil service and FPSO market.

TREE SYSTEMSCONTROLS AND MEASUREMENT

Contact person: David SouthTitle: Sales & Marketing ManagerE-mail address: david.south@hitecproducts.noCompany website: hitecproducts.no 23

IKM Subsea

IKM Subsea is an independent ROV operator, based in Norwegian specializing in ROV Operations and related subsea equipment. As part of IKM, a large multidiscipline sub sup-plier to the oil & gas industry, we operate globally out of Bryne near Stavanger. We do have branch offices in Aberdeen, Singapore and Malaysia

PRODUCTS:Electrical Workclass ROV & Inspection Class ROV

SERVICES:• ROV Operations• IMR engineering

SELECTED REFERENCES:• Statoil ASA• ENI• A/S Norske Shell

• Neptune Subsea• Nexans Norway• Siem Offshore• Solstad Offshore• Olympic Shipping• K-Line Shipping• Statnett• Jumbo Offshore• Bumi Armada• Swiber• McDermott

SEABED SURVEYS & LIGHT INTERVENTION

Contact person: Hans FjellangerTitle: Business Development ManagerE-mail address: hans.fjellanger@ikm.noCompany website: ikm.no/ikmsubsea 24

IKM Testing AS

IKM Testing is a company within the IKM Group and a multidiscipline supplier to the International Oil & Gas Industry. IKM Testing was established in 1992 and is today a global supplier within Pre-Commissioning and Commissioning Services both to the onshore and the offshore industry.

High Quality SolutionsThrough close collaboration with our clients and joint tenders IKM is continuously growing and developing, and we endeavor to deliver cost effec-tive, high quality solutions to our customers. Our ambition is that all of our clients will choose IKM as their preferred supplier.Global footprintIKM Testing’s head office is located at Sola in Norway and has departments in Bergen, Kristiansund and Hammerfest.Subsidiary companies have been established in 12 countries worldwide.Training & Competency CentreIKM Testing has experienced and multi-skilled personnel with high documented competence. To reinforce our expertise we have established our own training and competency centre, which is a very useful facility both for internal and external use.

MULTI-DISCIPLINE SERVICES:• Pipeline, Flowline and Spools Pre-Commissionin

· Pigging and Gauging · Flooding and Testing· Dewatering/Drying

• Umbilical Testing

• Pressure Testing· Bolt Working Services· Hot Oil Flushing· Chemical Cleaning· Hydrojetting

• Decommissioning• Drying/Air Treatment• Mud Recovery without Riser (MRR)• Preservation

· Cold Cutting Services• Cutting Transport System (CTS)• Slop Treatment (Offshore)• On-site Machining Services

· Pipe Freezing· Certification of Accumulators

• Scale Squeeze Inhibition• Nitrogen Services• Video Inspection

IKM RESOURCES:• Integrated services• Multi-skilled personnel• Fleet of modern and efficient equipment• Flexible and mobile• Strong experience• Global presence

TREE SYSTEMSSUBSEA FACILITIES

UMBILICALS & CABLESRISERS, FLOWLINES & TIE-INS

Contact person: Jens BolmeTitle: International Sales & Marketing DirectorE-mail address: Jens.Bolme@ikm.noCompany website: ikm.no 25

Institute for Energy Technology

Institute for Energy Technology (IFE) is an independent research institute for energy and nuclear technology. The institute has a permanent staff of 550 and an annual turnover of about 125 MUS$. Within petroleum technology IFE has expertise in reservoir tracer studies, multiphase transport, corrosion control, and control room engineering. More than 80% of the turnover is financed by industry and more than 50% is financed by international clients.

SERVICES:IFE is mainly a research institution and as such delivers new knowledge, methods and technology for our clients. In addition to research projects some research-based commercial services are delivered.

Within the SURF-area IFE’s Corrosion and Materials Technology Department serves the industry with corrosion mitigation testing for safe use of carbon steel in multiphase flow-lines with presence of H2S and CO2. IFE delivers services for measurement of liquid content of gas-condensate pipelines using tracer technology.

IFE provides testing and consultancy services for:• corrosion control in gas condensate pipelines

using pH-stabilized glycol,• corrosion inhibitor qualification for high tem-

perature or high H2S content service,• scale control in MEG regeneration systems serv-

ing gas-condensate tie-backs,• measurement of liquid content of gas-conden-

sate pipelines.

SELECTED REFERENCES:• Studies of pH stabilization for corrosion control,

top of line corrosion studies and operation of MEG regeneration system for an offshore gas field with high CO2 content. Project for a major IOC, 2003 – 2009.

• Evaluation and field support for scale and salt precipitation in glycol regeneration system for an offshore gas field. Project for a major IOC, 2002 – 2008.

• Studies of pH stabilization for corrosion control for a deep water offshore gas field. Project for a major IOC, 2004 – 2006.

• Corrosion inhibitor qualification for an offshore oil field with high H2S content. Project for Agip KCO, 2002 – 2005.

• Liquid content measurement of gas-condensate pipelines on the Norwegian Continental Shelf from 2003 and onwards; Huldra-Heimdal, Troll-Kollsnes, Kvitebjørn – Kollsnes, Mikkel – Åsgard, Midgard – Åsgard.

TECHNICAL SERVICESPRODUCTION SERVICES

Contact person: Rolf NyborgTitle: Department Head E-mail address: Rolf.Nyborg@ife.noCompany website: ife.no26

KONGSBERG Oil & Gas Technologies

KONGSBERG supplies a unique range of software solutions, services and subsea infrastructure covering the entire lifecycle of oilfields and enhances performance and operational efficiency by:-Integrating subsea products, decision support and engineering services for optimal solu-tion performance-Integrating solutions across vendors and systems through dedication to industry standards-Integrating across multiple locations and assets for an enterprise-wide overview.

SUBSEA ENGINEERINGPIPELINE ENGINEERINGTECHNICAL SERVICESPRODUCTION SERVICES

CONTROLS AND MEASUREMENTSUBSEA FACILITIESSUBSEA PROCESSINGTOOLING

RISERS, FLOWLINES & TIE-INS

Contact person: Astrid Rusås KristoffersenTitle: VP Subsea Systems & Solution SalesE-mail address: astrid.rusas.kristoffersen@kogt.kongsberg.comCompany website: kongsberg.com/kogt

Flexible pipe and umbilical analysis recent list• Statoil Johan Castberg Riser System Concept• Statoil Gjøa and Vega verification• Statoil Njord FutureRiser Integrity Management (RIM) recent list• Statoil RIM frame agreement (Åsgard A, B & C,

Kristin, Norne, Njord A&B, Heidrun)• Statoil Peregrino RIM frame agreement• ExxonMobil RIM Jotun, Balder, MEGIPipeline Engineering reference list:• Statoil Johan Castberg Extened Concept and

pre-FEED studies• ONGC/Aker G4, D and E Field development• Centrica/Aker Fogelberg Pipeline concept study

FlexStress project reference List• ExxonMobil multiple projects• Statoil Gjøa• Talisman VargHardware delivery reference list:• Statoil Polarled FSP (Foundation Slide Plate),

PLEM, PLR (Pig Launcher Receiver), Blind Cap, Laydown Joint, In Line Tees, Dewatering system with THOR horizontal tie-in

• Statoil/EMAS Smørbukk South Extension Replacement Spools with integrated PLET

• Statoil/Ocean Design Gina Krog/Eirin Riser Base w/cover, 20 inch Subsea pig launcher/ receiver

• Pig Launcher & Receivers: Technip (Gjøa, Ekofisk, Yme,) Acergy (Ormen Lange), Subsea7(Vega)

• RMS More than 20 systems delivered

SELECTED REFERENCES:

PRODUCTS: Subsea Engineering & Services from conceptual definition, design and construction, through to operation, field development and system engineer-ing. Pipeline, flowline, riser and umbilical engineer-ing, SURF installations analysis and procedures. Subsea Products & Integrated Systems from the flange of the tree to the topside hang-off; manifolds/structures, Subsea Storage Units (SSU), tie-in systems (incl. our Thor horizontal tie-in), hot tap tees/systems, in-line tees and wyes, pig launchers/receivers, subsea safety

systems, subsea clamps, ROV tools, intervention and handling equipment, pressure balanced weak links,subsea coolers.Production Assurance Solutions include the K-Spice® engineering simulator, operator training simulators, real-time dynamic multiphase flow simulators and LedaFlow® transient multiphase flow simulator. Drilling & Wells Solutions include SiteCom® real-time data aggregation and visual-ization software and Riser Management System. Rig Manager® is asset, operations and personnel management software.

27

MARINTEK Norsk Marinteknisk Forskningsinstitutt AS

The Norwegian Marine Technology Research Institute (MARINTEK) performs research, development and verification projects for companies in the field of marine technology. MARINTEK is a company in the SINTEF Group, the largest independent research organiza-tion in Scandinavia. MARINTEK develops and verifies technical solutions, business and operating concepts for the shipping, marine equipment, ocean energy and petroleum indus-tries. MARINTEK’s services are based on a unique combination of theoretical knowledge, extensive laboratory facilities and engineering expertise. MARINTEK’s headquarters and laboratories are in Trondheim, Norway, with a subsidiary in Houston, Texas.

PRODUCTS:Software• SIMLA - engineering analysis of offshore pipe-

lines (design, installation and operation)• RIFLEX - non-linear global response analysis of

riser systems• VIVANA - calculation of vortex-induced vibra-

tions on slender marine structures• BFLEX - stress and fatigue analysis of flexible

pipe cross-sections• UFLEX - stress and fatigue analysis of umbilical

and cable cross-sections• MIMOSA - market leader in mooring analysis• SIMA - coupled analyses of offshore structures

and operations• SIMO - simulation of complex marine operations• MOPSIM - real-time simulator for complex

marine operations• SIMVIS - visualization of simulated marine

operations

SERVICES:Slender Marine StructuresMARINTEK is at the forefront of the development of advanced numerical and experimental methods for structural analysis.• Dynamic response analysis of risers, umbilicals

and cables• Stress and fatigue analysis of complex cross-

sections; flexible risers, umbilicals and cables• Full scale and component qualification testing of

flexible risers, umbilicals, cables, hoses and

mooring lines• Static and dynamic analysis of pipelines;

simulation of pipe laying, free span assessment, upheaval buckling and snaking, on-bottom stability

• Model testing and numerical analysis of vortex-induced vibrations on deepwater risers and flowlines

• Reliability assessment of risers and pipelines

Marine OperationsMARINTEK is a market leader in marine operations feasibility studies, planning, and control.• Simulation of subsea operations and platform

installations• Sub-sea lifting and installation analyses• DP and positioning of surface vessels• Forces on, and motions of, complex geometries• Heave compensation devices

Laboratory facilities • Ocean basin• Towing tanks• Marine structures laboratory

SELECTED REFERENCES:• STATOIL• Hydro• Nexans• NKT• Chevron

TECHNICAL SERVICES

UMBILICALS & CABLESRISERS, FLOWLINES & TIE-INS

SEABED INSTALLATION

Contact person: Egil Giertsen / Øyvind HellanTitle: Research DirectorE-mail address: info@marintek.sintef.noCompany website: marintek.com28

Multiconsult AS

Multiconsult has been involved in oil & gas projects in Norway and abroad for over 40 years. We have developed leading expertise in design, engineering and follow up of execution and installations for both on- and offshore projects. Our expertise covers civil, geotechnic, design of sophisticated concrete and steel structures as well as multidiscipline engineering including special services for offshore structures and floaters and onshore plants according to NORSOK requirements. Our specialized services within marine geotechnical and arctic technology comprising cold climate engineering and offshore ice simulations are recog-nized on a world class level. Our expertise is based on heavy involvement in R&D projects. The harsh climate along the Norwegian coastline and offshore in the arctic areas poses challenges which have required technology development in many areas. Multiconsult has been heavily involved in challenging projects and technology development in this area.

MULTICONSULT SURF RELATED DISCIPLINES:Environmental loads, marine operations, geotech-nical engineering, structural engineering, mechani-cal engineering, 3D-Modelling, engineering management, site supervision, commissioning

SELECTED OBJECTS:• Template structures including foundations• Protection frame structures• Risers• Anchors and moorings

SERVICES:• Planning and follow-up of offshore soil surveys• Performance of near shore surveys and laboratory

testing• Concept development• FEED and detail engineering • Ice load simulations and scour of sea bed • Soil-structure interaction analyses• Dynamic analysis

REFERENCES:Johan Castberg, , Aasta Hansteen, Åsgard Subsea Compression, Goliat, Kizomba, Moho, Kaombo, Mamba & Coral South, Gorgon, Ichthys, , Kikeh, Liuhua, Jack & St. Malo, Barracuda

SUBSEA ENGINEERINGTECHNICAL SERVICES

SEABED SURVEYS & LIGHT INTERVENTION

Contact person: Ivar EngTitle: Vice President Market Oil & GasE-mail address: ivar.eng@multiconsult.no Company website: multiconsult.no 29

Nexans Norway AS

Nexans Norway AS is one of the world’s leading suppliers of subsea umbilicals and high-voltage submarine cables, and is the leading supplier of power and telecommunications cables in Norway. Nexans Norway AS develops, manufactures and markets submarine, land and offshore umbilicals, and cables for power and telecommunication transmission. The company also markets cables manufactured by NVC in Japan, a production company which is a joint venture between Viscas and the Nexans group.

Nexans Skagerrak AS is a wholly owned subsidiary of Nexans Norway AS. Nexans Skagerrak AS is engaged in transport, laying and installation of submarine power cables and owns the cable laying vessel C/S Nexans Skagerrak.

Nexans Norway’s plants are located in Namsos, Rognan, Karmøy, Halden and Langhus and the company’s head office is in Oslo. Nexans Norway has approx. 1,500 employees.

Nexans Norway AS is part of the French Nexans group – one of the world’s largest cable manu-facturers - and the company is a wholly owned subsidiary of Nexans participations SA in Paris.

PRODUCTS:Nexans has worked with cables for 100 years, and has more than 25 years experience as a manu-facturer of umbilicals for the offshore industry

adapted to harsh North Sea conditions.Nexans has qualified control umbilical and power umbilical for 3000 meters water depth, and aims beyond this.

Nexans provides complete EPC (engineering, procurement and construction) umbilical solutions from engineering to manufacturing and the qualifi-cation and testing.

SERVICES:Nexans provide installation services with its fully owned installation vessel Skagerrak, and trenching services with the ROV based CAPJET.

SELECTED REFERENCES:Among our references are Julia, Åsgard, Jack/St. Malo, LagganTormore, Atlantis, Thunder Horse, Mexilhao and Usan. Read more on www.nexans.no/umbilical

UMBILICALS & CABLES

Contact person: Bjørn BjørnstadTitle: Sales ManagerE-mail address: Bjorn.Bjornstad@Nexans.comCompany website: nexans.no30

NYMO

Nymo is a full-service engineering, procurement and construction company within the oil & gas and process industry. Nymo offers total solutions to customers and has earned con-fidence for versatility, reliability, quality service, timely delivery, good project management and commitment to HSE excellence.

Nymo has extensive experience and expertise in fabrication of subsea facilities.

PRODUCTS:Our staff is well experienced in detail design, procurement of materials, fabrication and testing of complete units for seabed installation. The fab-rication skills include all relevant material qualities used in subsea equipment.

Units delivered:• Manifolds for multi well field developments• Satellite production wellhead frames• Injection wellhead frames• Seabed compression unit• Tie-in spools• Well jumper kit

SERVICES:Nymo has since 1990 fabricated subsea struc-tures and piping systems for subsea production and injection wells. In total number approx 100

units are delivered mainly for the Norwegian con-tinental shelf. Most known fields delivered to are Troll Oil Province in the North Sea and Snøhvit Gas field in the Barents Sea. Detail engineering is avail-able for structural and piping disciplines. Special subsea platforms with depth of 10 m and 30 m are available for submerged testing. Overhead lifting capacity of 220 MT.

SELECTED REFERENCES:Some major projects:• Tordis, EPC contract subsea manifold• Snorre B, Fabrication of subsea manifold and

structures• Troll Olje, Fabrication of 23 off manifolds, 5 off

riser bases and 5 off satellites• Snøhvit, 6 off template manifold subsea• BP Angola Block 18, Well jumper kit fabrication• Alvheim, Manifolds and Riser bases• Yme/Gjøa, subsea tie-in spools• Bøyla, Manifold and structures• Boa Manifold

SUBSEA FACILITIESSUBSEA PROCESSING

Contact person: Einar AanonsenTitle: Director Projects and MarketsE-mail address: einar.aanonsen@jjuc.no Company website: nymo.no 31

OneSubsea

OneSubsea® is a leading provider of subsea multiphase and single-phase boosting sys-tems, subsea and topside metering systems and swivel and marine systems. The company is engaged in major development and delivery projects with a significant market share for new, mature, marginal and deepwater field developments. The company develops and delivers subsea boosting and swivel systems under EPC contracts or as integrated supplier for subsea production systems. Deliveries are supported by system integration testing performed in advanced assembly and test dock facilities.

OneSubsea has established a well organized customer support organization for the after-sales market, installation, commissioning and start-up, service agreements, and 24/7 on-call support for customers.

PRODUCTS:• OneSubsea Multiphase Pump and OneSubsea

Single-Phase Pump systems subsea, topside and land applications

• OneSubsea Multiphase Wet Gas Compressor systems for topside and subsea installations

• OneSubsea PhaseWatcher Subsea Multiphase and Wet Gas Flow Meter for topside and subsea installations

• Swivel stack/turret systems for FPSOs • Submerged offloading systems • Offshore cryogenic transfer systems

SERVICES:OneSubsea provides a complete range of services for both subsea production systems and subsea processing systems. Condition-based and planned preventive maintenance and operational support are provided around the clock using the OneSubsea FRIEND® Remote Surveillance and Diagnostic System.

REFERENCES:Please visit our website www.onesubsea.com for more information and references.

SUBSEA ENGINEERINGPRODUCTION SERVICES

TREE SYSTEMSCONTROLS AND MEASUREMENTSUBSEA FACILITIESSUBSEA PROCESSINGSUBSEA POWER DISTRIBUTIONTOOLING

LIGHT WELL INTERVENTION

Contact person: Jan EldeTitle: Sales Manager, Pumps & Subsea Systems, Western HemisphereE-mail address: jan.elde@onesubsea.comCompany website: onesubsea.com32

PG Flow Solutions (Ing. Per Gjerdrum AS)

PG Flow Solutions (Ing. Per Gjerdrum AS) has delivered innovative and tailor-made pump solutions to the offshore and marine markets in more than 30 years. Based on pump knowl-edge and experience, as well as high-quality sub-suppliers and numerous pump start-ups and services, the Oslo-based company is expanding activities to cover worldwide deliveries of a challenging and new subsea liquid pump solution.

PRODUCTS:• PG MAPS – Subsea Pump and control systems• PG MAPS – Multi Application Pump Solution for

offshore and subsea – is designed for abrasive liquid handling. The multipurpose pump for heavy duty pumping applications is a new and unique pumping solution developed by combining hose diaphragm pump heads and reciprocating power end using a permanent magnet linear electric motor. The unit has high pressure rating combined (< 350 bar) with supe-rior volume capacities.

• PG MACS - Multi Application Cargo Systems: Proprietary, world-wide patented system for below-deck handling of drill-cuttings, fuel oil, liquid- and dry cargo for OSV vessels. Also for Drilling Vessels - closed loop, safe and environ-mentally secure process for efficient handling of challenging cargo

• PG Submix - Hydraulic Agitators• PG Hydraulics - HPU - Hydraulic Power Units &

Systems• PG Hyde BWTS - Ballast Water Treatment

Systems• PG Deepwell Chemical Cargo Pumps - for Acids

and Toxic Cargo Handling• CIP - Chemical Injection Pump Systems • MEG/Methanol Injection Pump Systems • Water Injection Pumps• Crude Oil Export Pumps

• Utility & Process Pumps and Systems• Scale Squeeze / RFO• Liquid Cargo Pump Systems• Machine Room Pump Systems• Plate Heat Exchangers• Control Systems

SERVICES:• PG Construction - Weld and Machine shop• PG Fabrication - Fabrication, Assembly and

Testing Facilities• PG Life Cycle Services and Support Centre -

Spare Parts, Modification, Repairs, Maintenance, Service and re-Certification

• FEED Support and Studies• Design & engineering of customized solutions to

customer requirements• Selection and configuration of fit-for-purpose

equipment from leading suppliers• Commission and Installation• Testing and flushing• Surveys & Inspection

SELECTED REFERENCES:Our clients are Oil Companies, Ship owners, Yards and Engineering Companies, as well as key players in the subsea, oil service and FPSO market. We have more than 1.400 OSV Solutions delivered Worldwide. Installed base of pumps and systems on approx. 75% of NCS Offshore Platforms.

SUBSEA PROCESSING

Contact person: Mads GjerdrumTitle: VP General Manager Oil & GasE-mail address: mads.gjerdrum@pergjerdrum.noCompany website: pergjerdrum.no 33

RAE Energy

RAE Energy is a revolutionary service provider in the Oil and Gas industry differentiating ourselves through a passion for service and quality. We specialize in multiple disciplines including Pipeline and Facility Construction and Integrity Services alongside Pipe and Custom Coating and Fabrication Solutions. The core to our service delivery is through Welding, Inspection and Coating. Decades of experience around the world have culminated into best in class service through innovation and attention to detail. From our leadership team all the way to our onsite personnel we have a passion for service, quality and safety.

PRODUCTS:RAE Energy provides the complete solution for Spoolbases, Vessels and Pipelines, both onshore and offshore for Welding, Inspection & Coating. Our Inspection equipment is led by our UT Quality brand, where our AUT devices are designed and manufactured in North America and serviced at our global locations. Our coating team designs their own equipment and chemical formulations to ensure material properties and applications are within the operators and manufacturers’ specifica-tions and expectations

SERVICES:At RAE Energy, we prides ourselves on having highly specialized technicians to deliver a suc-cessful project every time. On top of providing Pipeline and Facility Construction and Integrity Services alongside Pipe and Custom Coating and Fabrication Solutions, we provide a full suite of Welding, Inspection and Coating services to deliver a complete solution to our clients:

Welding:• Mechanized and Manual Welding Equipment

and Personnel• Fabrication Solutions• Cladding Technology• Firing Line ManagementAnd more

Inspection:• Advanced Weld Inspections• Patented AUT System, UT Scan®• Conventional Non-Destructive Testing• Ultrasonic Testing (UT)• Radiographic Testing (RT)And more

Coating:• Anti-Corrosion Coating• Mechanical Joint Protection Coating• Thermal Insulation CoatingAnd more

SELECTED REFERENCES:RAE Energy has decades of experience working over 1,200 global projects in over 27 countries. We have worked in every corner of the world and with every major contractor.

TECHNICAL SERVICES

Contact person: Eirik SimonsenTitle: Managing DirectorE-mail address: es@rae.comCompany website: energy.rae.com34

REINERTSEN AS

Reinertsen AS is a family owned company supplying studies, FEED and EPCI projects to the Oil & Gas and industry. The company was established in 1946.

In 2014 Reinertsen presented a turnover of 440 million Euro. With its 2700 employees, REINERTSEN is represented in Trondheim (main office), Orkanger, Oslo, Bergen, Hammerfest, Gothenburg and Murmansk. REINERTSEN has been a supplier to the oil com-panies within subsea engineering for more than 30 years and within topside EPCI modifications and M&M for more than 15 years. The engineering division has a permanent staff of 1600. The company own and operate two offshore fabrication yards (Trondheim and Murmansk) and a multidiscipline offshore installation division. REINERTSEN has many large and demanding clients requiring streamlined execution of large projects. This has driven a fast development of systems within project execution and HES&QA, including engi-neering, procurement and material management.

PRODUCTS:REINERTSEN is an EPC provider of Subsea facili-ties, including manifolds / templates/ riser-bases/ protection structures/pipeline end terminations (PLEM/ PLET).

SERVICES:Reinertsen provides services related to all phases of a project, ranging from early studies through full EPCI services – i.e. all phases ranging from Concept, FEED, Pre- Eng, Bid, EPC, Installation and Operation. Reinertsen provides studies and engineering services related to all kind of subsea production and processing systems and subsea infrastructure and provide detail technical analysis studies to prosess and flow assurance and detail design of structures, piplines, flowlines, risers and umbilicals.Reinertsen is a product independent provider of total field developments.

SELECTED REFERENCES:Visund Nord Riserbase Riserbase for Visund Nord Project. EPC supply of a complete riserbase with SSIV and actuator and con-nections to 8” riser and 10” pipeline. Fast track project.ÅSGARD SUBSEA COMPRESSION DETAIL ENGINEERING (2011, ongoing) Client: Statoil Detail engineering of all pipelines and PLEM’s and PLETs for the Åsgard subsea compression project including several tie-ins, spools as well as routing of power cables and umbilicals ORMEN LANGE SUBSEA COMPRESSION (2010, ongoing), Client: Norske Shell AS Ormen Lange Subsea Compression - Field lay-out and flowline concept studies. Reinertsen had the overall responsibility for field-layout and cost and schedule estimates for the flowline system. SNØHVIT FUTURE (2011, ongoing), Client: Statoil Conceptual study of Snøhvit Future Development including conceptual flowlines and pipeline engineering and overall field layout development including optimization of number and location of PLEM`s and flowline manifolds. SKARV SURF FEED, (2005–2007), Client: BP A complete design of the subsea systems, umbili-cals, risers, flowlines (SURF) and the gas export pipeline to Åsgard Transport System. ORMEN LANGE PIPELINE ENGINEERING, (2003 to 2012), Client: Norsk Hydro Detail engineering of 2 x 30” multiphase pipelines, 2 x 6 5/8” MEG lines and two umbilicals from the Ormen Lange Field to Aukra. The engineering also includes the landfall and the first 33 km of the 42” Langeled pipeline.Maria Subsea FEED ( 2013 – 2014), Client: WintershallFEED engineering of the total subsea development for Maria including wellheads, xmas tree systems, subsea control systems, flow assurance, flowlines, umbilicals, pipelines, structures, DEH systems, chemical injection, riser as well as overall project management and control.

SUBSEA ENGINEERINGPIPELINE ENGINEERING

SUBSEA FACILITIESSUBSEA PROCESSING

Contact person: Torkild R. ReinertsenTitle: Managing DirectorE-mail address: torkild.reinertsen@reinertsen.comCompany website: reinertsen.no 35

Sandvik Norge AS Branch Riser Technology

Sandvik Norge AS, branch Riser Technology design and manufacture the brand Sandvik ClikLoc® connector and riser tubes to be used within well completion and intervention work. Sandvik Norge AS is a part of Sandvik Material Technology AB who is a world leading manufacture of high value-added products in advanced stainless steel and special alloys.

PRODUCTS:The Sandvik ClikLoc™ – a revolution in multiple make and break connections.The new, patented, high performance ClikLoc from Sandvik Norge AS combines hook-up time savings with increased operating safety. Make and break can be reduced by at least 80%, and since no loose components or make-up tool are involved, the hazard of falling objects has been eliminated. Designed and manufactured in accordance with ISO 13628-7 and DNV GL certified for completion and workover riser systems, the Sandvik ClikLoc™ is a bayonet type, stab-in, self centering coupling which means no rotation of the riser during set-up. The metal to metal seal needs very low pretention – the weight of the riser joint is sufficient – and the seal guaranteed when locked. The seal is also reusable allowing multiple make and breaks. Sandvik ClikLoc™ is suitable for sour and standard service, the connector operates at temperatures up to 121ºC and pressure up to 10.000 psi. The Sandvik ClikLoc™ is made from powder technology, super duplex stainless steel grade Sandvik SAF 2507. Typical applications are coil tubing High Pressure stack-up risers, work over and completion risers and hook-up of landing string to slick (case wear) joint, flow head and BOP in CT and WL operations.

SELECTED REFERENCES:When performing production well cleanup opera-tion to a semi submersible drilling rig a landing string system is connected to the wellhead. Using traditional technology, the last connection of the landing string is made by rotating the assembly above the surface flow tree or use flange connec-tion who is time consuming. BP Norway at BP SKARV and Marathon Norway at ALVHEIM choose to use the Sandvik ClikLoc™. The customer’s concludes: “Overall we have been very pleased with the connector. It has certainly made connecting the surface flow tree assembly and above equipment much simpler and safer than other connection.” The largest foreign operator in Norway continental shelf was looking for a safer and time saving alterna-tive to the conventional rigging of coil tubing stack up risers. Conventional rigging of a 30-meter tall riser tower involves more than 900 potentially falling objects. One single bolt can weigh as much as 4 Kg.

By employing Sandvik ClikLoc™ at Ekofisk X in the North Sea for well intervention, the oil company able to increase crew safety dramatically. Speedy rig up and rig down has minimized the time the well intervention riser tower has to occupy valu-able time on the platform skid deck. Other company using the Sandvik ClikLoc™ is Baker Hughes, Well Partner AS, Total E&P Norge, Shlumberger and Statoil.

TREE SYSTEMS

RISERS, FLOWLINES & TIE-INS

Contact person: Tore SalteTitle: Sales ManagerE-mail address: tore.salte@sandvik.comCompany website: clikloc.com36

Seabox AS

The patented SWIT® technology enables injection of sea water treated to any desired specification including low salinity water directly on the seabed. The most flexible and cost effective solution. The technology, enables a step change in reservoir and asset manage-ment, accelerating production and increasing recovery. Total investments and cost of production facilities will be significantly reduced.

PRODUCTS AND SERVICES:The SWIT® technology offers a different approach to how reservoir and assets are managed and produced. Cleaning the surrounding sea water at the seabed and feeding directly into subsea injec-tion wells or to a platform or floater is a completely different concept than the traditional topside approach. The benefits are significant from many aspects; reduced weight and area required top-side; no long reach platform water injectors (WI) required; acceleration of production; increased recovery through flexible and phased deployment of the WI capacity required.A total of 24 months full scale pilot testing has been conducted in the Oslo fjord. The SWIT® cleaned water was pumped to shore to NIVA Marine Research Centre for monitoring and test-ing. The results exceeded expectations and docu-mented superior water quality for WI compared to traditional topside facilities. The Joint Industry

Project (JIP) companies verified the results and technology is ready to be used in field applica-tions. SWIT® has been approved via technology qualification program with major oil companies and is currently being considered in a number of projects globally.In 2013 another JIP was successfully completed proving that SWIT® feeding membranes make membranes last very long without any degrada-tion in performance or maintenance requirement. A new JIP started fall 2014, taking the final step to a fully integrated subsea SWIT® + membrane facility, enabling low sulphate and low salinity water injection from seabed as well.

SELECTED REFERENCES:ExxonMobil, Az ACG Ltd (The State Oil Company of the Azerbaijan Republic - SOCAR), Chevron, Shell, Statoil, Total, ConocoPhillips, Wintershall, Lundin, GdF, Suncor)

SUBSEA FACILITIESSUBSEA PROCESSING

Contact person: Torbjørn HegdalTitle: Business Development ManagerE-mail address: toh@sea-box.noCompany website: sea-box.no 37

Siemens Oil & Gas Subsea Solutions

Siemens Subsea is one of the leading providers of subsea power supply and distribution systems, including the solutions experience for configuring complex power transmission to multiple subsea consumers. Beyond power and distribution, our portfolio of subsea prod-ucts and systems covers a broad spectrum of applications. Backed by extensive mariniza-tion expertise and a variety of exemplary life-cycle management and service support offers, Siemens provides answers at every phase of the development of the field.

SUBSEA PRODUCTS:Subsea products for customized solutions with a portfolio of market-leading brands such as Tronic, Matre and Bennex.

Tronic connector systems:Electrical and fiber-optic connector systems for subsea power and communications. Currently development of a 36kV 1000 Ampere wet mate-able connector system.• DigiTRON: Subsea controls & distribution• SpecTRON: Subsea medium & high-voltage • FoeTRON: Wellhead feedthrough & subsea

fiber-optics• ElecTRON: Wellhead instrumentation

feedthrough

Matre sensors, transmitters and instruments for monitoring subsea operations conditions• Wellhead Pressure Sensors (WEPS)• Pressure Temperature (PT) sensors • Differential Pressure (DP) sensors for subsea

applications• Flow measurement

Bennex subsea power and signal distribution productsEquipment for power solutions, fiber-optic and seismic applications; electrical and optical subsea distribution systems; jumpers and cable terminations.• Anguila subsea distribution system• Anguila Advanced Cable Termination (ACT)• Anguila Advanced Fiber Termination (AFT)• Fiber-optic penetrator

• Hydraulic/electric flying leads• High-Power Changeover Switch (HPCS)• Anguila Cobra Head• Subsea Distribution Unit (SDU)

SUBSEA SYSTEMS:In response to the needs of the oil and gas industry, Siemens is delivering customized and fully marinized subsea power, control and surveillance systems that are key enablers for subsea processing on a large scale. • Power systems for pumps and compressors• Direct Electrical Heating (DEH) systems• Permanent Reservoir Monitoring (PRM)• Subsea Hydraulic Power Unit (SHPU)• Subsea Control Unit (SCU)

Siemens Subsea Power Grid: Powering installa-tions on the seabed – down 3000 meters With the Subsea Power Grid, a supply and distribu-tion system, we are combining our high R&D focus and broad subsea power concept experience with our extensive marinization expertise. Currently undergoing the detail design and test phase, it incorporates proven high-quality Siemens indus-trial components that include subsea transform-ers, switchgear and variable-speed drives.

LIFE CYCLE MANAGEMENT:Siemens is fully backing its subsea commitments by offering qualified service technicians and exemplary service and support. Our strong global presence with state-of-the-art facilities on four continents allows proximity to our customers and ensures that service needs are met locally.

Enabling Subsea Processing by Connecting Innovation with Experience

SUBSEA ENGINEERING

CONTROLS AND MEASUREMENTSUBSEA PROCESSING SUBSEA POWER DISTRIBUTIONTOOLING

Contact person: Ordin HusaTitle: Head of Strategic Marketing and SalesE-mail address: ordin.husa@siemens.comCompany website: siemens.com/energy/subsea38

Subsea 7

Subsea 7 is a world-leading seabed-to-surface engineering, construction and services contractor to the offshore energy industry. We provide cost-effective technical solutions to enable the delivery of complex projects in all water depths and challenging environments. Our vision is to be acknowledged by our clients, our people and our shareholders as the leading strategic partner in our market. We focus on segments of the subsea market where we can differentiate ourselves by delivering high-quality services built around our core strengths of engineering and end-to-end project management.

PRODUCTS AND SERVICES:Our extensive experience in deepwater Subsea, Umbilical, Riser and Flowline (SURF) and Life-of-Field projects has made us the preferred contractor and trusted partner for national and international energy companies. We provide inte-grated services and we plan, design and manage the delivery of complex projects in harsh and challenging environments. Many of our activities fall within Engineering, Procurement, Construction and Installation (EPCI) project delivery, where our experience is based on a proven track record of successful delivery.

SURFThe scale and complexity of Subsea Umbilicals, Risers and Flowlines (SURF) projects continue to grow as new reserves are found in deeper water and in more challenging environments, with clients packaging their scopes of work into larger Engineering, Procurement, Installation and Commissioning (EPIC) frameworks. We are a global market leader in this sector and in every major offshore region we safely execute projects which connect seabed wellhead infrastructures to surface facilities such as platforms and floating production systems.

LIFE OF FIELDOperators are working increasingly closely with experienced specialist contractors to improve the full lifecycle reliability of subsea infrastructures. With over 30 years’ experience in Life of Field, we are an acknowledged world leader in this growing, long-term market. We provide global integrity management, survey, inspection, repair and main-tenance (IRM) and field extension services, draw-ing on our pioneering development and application of key Life of Field technologies and assets.

SUBSEA ENGINEERINGPIPELINE ENGINEERING

RISERS, FLOWLINES & TIE-INS

SEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYING, PIPELINE REPAIR

Contact person: Craig MacFarlaneTitle: Sales & Marketing Director NorwayE-mail address: Craig.MacFarlane@Subsea7.comCompany website: subsea7.com

Services • EPIC contracting• Engineering design• Project management• Pipeline design, fabrication

and installation• Life of Field• Inspection, Repair and

Maintenance (IRM) Integrity management Remote inter-vention Diving

• Fabrication• Fleet provision• Remotely Operated Vehicles

(ROVs)• Intervention and drilling

support

Capability • Pipelay fabrication

· Rigid· Bundle

• Pipelay installation· Rigid reel-lay· J-lay S-lay Flex-lay· Bundle-lay

• Construction· Fleet capacity and flexibility· Lift and storage

optimisation• Diving services and remote

intervention· Diving· Remotely Operated Vehicles

(ROVs)• Heavy lift

· Up to 5,000 tonnes

Technology• Riser Systems

· Single and Hybrid Riser· Towers (HRTs)· Steel Catenary Risers (SCRs)

Buoy-Supported Risers (BSRs) Grouped Single Line Offset Risers (SLORs)

• Pipelines· Bundles· Pipe-in-Pipe (PIP)· Electrically Trace Heated PIP

• Materials and welding· High-strength steel· Corrosion-resistant alloys

(BuBi®)· Composites

• Remote intervention · Autonomous Inspection

Vehicles (AIVs)· Sensors

39

Subsea North AS

In Subsea North we focus on emerging upstream markets. We improve the running services and the value chain by reuse and interaction between the best players. In complex markets, we need to cooperate and share:

- Training, spare parts, logistics- Knowledge transfer, consulting, recruitment- Services and fabrication- Cash-flow opportunities- Brazil – Norway/UK – Southeast Asia

The company is located in Stavanger and our strength comes from our partners and mem-bers. Our customers and clients gain more then they give or pay for.

SERVICES:Local content is a given in many emerging markets, both from a political and technical/operational point of view. Together with partners, we offer:

• Technical training from basic level up to bachelor level, qualified workers are hired and engaged. Knowledge is a necessity for estab-lishment of a local supply chain of products and services, and possible fabrication. Qualified owners have knowledge. The key for entering of products and services is local content, or techni-cal training of local workforce. E-learning can be extremely cost effective, the market is changing. Together with partners we can offer:· 450 courses 50/50 e-learning and classroom· Local classrooms when needed· 30 course providers· 400 customers· Reuse of proven SW solutions

• Exchange of knowledge between companies/candidates and oil regions. We offer a way forward to build an efficient supply chain locally, introducing state of the art workflows and technologies.· Connecting engineering companies between

oil regions

· Connecting key people to companies and training/R&D institutions

• Connect technology companies with local prod-uct/fabrication and service companies. Either as partners, sub-suppliers or joint ventures.

• Networking on a personal level and net-based. Newsletters to one thousand key target person-nel involved in Brazil, Malaysia, Norway and several other emerging markets.

REFERENCES:We are involved with partners and clients in these cases:• Training of offshore crane operators in Brazil• Involved in establishing a Brazilian

Technological Institute for Oil, Gas and Energy in South of Brazil.

• Technical training and classroom facilities in Brazil, Malaysia and Vietnam.

• Geo science and IOR technology to companies in Brazil, Malaysia and Vietnam.

• A large service company in Brazil entering the offshore market with services including preser-vation, cleaning and waste treatment.

• Fabrication and services in Sao Paulo, Brazil as sub-suppliers or joint ventures.

• Fabrication in Vietnam.

SUBSEA ENGINEERING

CONTROLS AND MEASUREMENTSUBSEA PROCESSING SUBSEA POWER DISTRIBUTIONTOOLING

Contact person: Åge EiksåTitle: CEOE-mail address: ae@subseanorth.noCompany website: subseanorth.com40

Technip Norge

If energy were easy, there would be no need for a company like Technip. We work with our clients, today and tomorrow, wherever they are, to bring energy to the World. We will con-tinue to contribute to their success through our constant customer focus and our integrated and sustainable project approach.

Technip’s mission is to deliver safe and suc-cessful energy projects across the World for the benefit of all our stakeholders. ‘Take it further’ is our approach to business, partnerships and aspirations. It conveys the unique message that Technip intends to excel in what we do, suc-ceeding together, exceeding expectations and innovating continuously. Within the domain of subsea hydrocarbon field development, Technip’s main focus area in Norway, our activities cover the design, manufacture and installation of rigid and flexible subsea pipelines and umbilicals. Technip is a key integrated player in this market thanks to our portfolio of state-of-the-art subsea pipe technologies and our industrial and operational assets. Technip’s workforce in Norway comprises ~700 employees out of ~40,000 worldwide, is split between the main office in near Oslo and offices in Stavanger and Haugesund. Since the mid 1990s Technip in Norway has been playing a leading role in the development of subsea fields, including the infield transportation and flexible riser systems essential for the development and implementation of subsea and floating production facilities. The Technip spoolbase in Orkanger is specialized in the welding of exotic pipeline materials and the fabrication of high specification pipelines, such as both Passive and Electrically Trace Heated Pipe-in-pipe systems and HDPE lined water injection flowlines, and has delivered many hundreds of kilometers of infield flowlines for installation by reeling on the Norwegian Continental Shelf.

PRODUCTS:Rigid steel pipelines for installation by the reel method in sizes up to 16” OD (18” from 2013), with a uniquetrack record in the welding of exotic materials (13%Cr, Clad, Lined) and fabrication of highly insulated passive Pipe-in-Pipe systems and the newly developed Electrically Trace Heated (ETH-PIP) system. Flexible flowlines and risers in sizes from 2” to 18” ID for design conditions matching water depths and oil and gas production profiles for the most severe subsea developments. Flexible manufacturing plants in France, Brazil and Malaysia. Customized umbilical systems for subsea development projects, with manufacturing plants in Great Britain, United States of America, Angola and Malaysia.

SERVICES:Our core business is to provide engineering, pro-curement, construction and installation services for subsea and offshore projects. Within subsea this includes tie-backs, subsea construction, flowline installation, flexible riser and flowline supply, marine operations, diving and inspection maintenance and repair (IMR) activities. Through the investments in offshore competencies, such as the strategic agreement with KANFA and majority stake in Inocean, Technip in Norway is in the process of building a significant competence base on the design and engineering of offshore facilities for service on the Norwegian Continental Shelf (NCS) and worldwide offshore construction with an extensive fleet of specialized vessels.

SELECTED REFERENCES:For references within any of the various fields of competence in Technip please check the internet site given above or contact the Director for Sales and Business Development for Technip in Norway at the email address stated.

SUBSEA ENGINEERINGPIPELINE ENGINEERING

UMBILICALS & CABLESRISERS, FLOWLINES & TIE-INS

SEABED SURVEYS & LIGHT INTERVENTIONSEABED INSTALLATIONPIPELAYING, PIPELINE REPAIR

Contact person: Oddbjørn NupenTitle: Director Sales and Business DevelopmentE-mail address: ONupen@technip.comCompany website: technip.com 41

Techno Dive AS

Your worldwide partner for safe- and efficient under water work.

PRODUCTS:Under water paint. Together with Lestin ag in Austria, we present the only functional under water epoxy paint, applied by our divers carrying brush and bucket under water. The product applied guarantee a strong adhesion and quality totally pre-venting corrosion for years. The product is tested by DNV GL and used both for sealing purposes as well as for preventing corrosion on semis, ships and quays worldwide.

SERVICES:Special Periodic Surveys (SPS), Underwater inspections, Thruster replacement/work/change-outs, Structural repairs and upgrades (uw welding, sandblasting and painting), Anode replacement in wet or dry conditions, Blinding of valves and sea chests, Overhaul of valves, Hull cleaning and polishing, Pulling of Tail shaft, Underwater engi-neering, Equipment – Dry habitats

SELECTED REFERENCES:Techno Dive is approved by all major class societies as DNV GL, ABS, Bureau Veritas Norge and Lloyds.And we are approved supplier to Statoil, BP, Shell and rig owners Transocean, Noble, Seadrill, Dolphin etc.

SEABED SURVEYS & LIGHT INTERVENTION

Contact person: Bjørn UtsethTitle: General ManagerE-mail address: post@techno-dive.noCompany website: techno-dive.no42

TESS as

PSF Headquartered in Drammen, Norway, TESS is one of Europe’s leading hose service compa-nies. Since 1968, engineering and hose management solutions have increased uptime and safety levels in the oil & gas, subsea and maritime industries. Today with more than 110 service centres worldwide, TESS annual sales exceeds NOK 2.4 billion/EUR 312 million/USD 340 million.

ENGINEERING & SYSTEMSTESS’ service portfolio includes complete engineering, procure-ment, construction and instal-lation. TESS has established a dedicated technical division with R&D activities, customized production and total solutions deliveries. Together with part-ners TESS undertakes the full responsibility of:• Hose handling systems/

offshore loading• Customized hose solutions• Hydraulic Flying Leads (HFL)

and bundles• Subsea umbilicals

SERVICESTESS has extensive product and field experience. TESS’ service personnel is continuously trained and certified by training courses. TESS also providescustomer training courses.The company’s Life Cycle Care philosophy includes technical service agreements, 1st – 3rd line customer support, testing,spares and rental.Increased uptime, reduced cost,more transparent project man-agement and last but not least an

improved Q/HSE focus makes the company a preferred supplier for:• TESS Hose Management• Manufacturing and project

management• Pressure testing, flushing and

certifying of hoses/systems• Piping /welding• Integrated Supply Systems

and Partner Shops• Innovation resources

PRODUCTS (MRO)TESS’ experts and engineering staff are continuously improving its product range enabling the company to meet present and future demands. TESS is innova-tive, and cooperates directly with some of the world’s leading manufacturers.TESS offers:

Hoses & couplings• Industrial and hydraulic hoses• Bunkering and drilling hoses• Ultra high pressure hoses• Fire resistant - Warmguard

hoses/BOP• Fittings and valves• Pipe fittings and quick couplings• Steel hoses, compensators

and pipes

• Heated hoses

MROP• Welding equipment and

materials• Personal protection and work

wear equipment (PPE/PPC)• Tools and material handling• Transmission products• Chemicals and lubricants• Other MRO products

TESS IS ISO 14001 CERTIFIEDAfter having passed the ISO 14001 audit, TESS has become one of the first hose and hydrau-lic suppliers in Norway to receive an ISO 14001 certificate for its environmental management system.TESS is ISO 9001 certified.

CUSTOMER REFERENCES• Statoil• FMC Technologies• Aker Solutions• Shell• Exxon Mobil• Halliburton• North Atlantic Drilling• Maersk• And other successful customers

CONTROLS AND MEASUREMENT

Contact person: Stefan JohnsenTitle: Sales Manager SubseaE-mail address: Stefan.johnsen@tess.noCompany website: tess.no 43

Trelleborg Offshore

Trelleborg Offshore is a world leader in engineered polymer solutions that seal, damp and protect critical applications in harsh and demanding environments. We have 120 years of experience as well as dedicated and knowledgeable people providing performance at every level. Trelleborg Offshore has a global presence with many class leading manufacturing facilities around the world.

Since 1896 we have taken advantage of the well-known rubber properties to evolve the company from producing footwear into supplying highly engineered products. Our competence has been reined into advanced polymer technology, serving the worldwide market with corrosion- and fire protection and ther-mal insulation together with molded products.

PRODUCTS AND SERVICES:Trelleborg Offshore Norway produces tailor made solutions in rubber for protection of other materials, against corrosion, fire, heat and wear-ing. Rubber also gives excellent performance as a construction material in vibration and shock dampening, in elimination of structural noise and is the ultimate material for sealing systems.We have recently launched our Mobile Production Unit (MPU) which together with new material developments allows thermal insulation, corrosion protection and passive fire protection to be applied and vulcanized at sites word wide.

We are highly experienced in developing tailored solutions combining the highest level of per-formance and competitiveness and we are in constant contact with our customers in order to define their particular requirements.The innovation process is conducted on three levels:• Basic know-how in the physics and chemistry of

polymers• Experience and knowledge of polymers

applications• Design of products including production an

Installation

REFERENCES:• Thermal insulation/high temp to BPs Devenik

project.• Thermal insulation to Statoils Åsgard Gas

Compression project• Thermal insulation of Exxon Hebron project• Thermal insulation of CNR Baobab• Thermal insulation of Total Girri & Rosa• Thermal insulation to Excons Kizomba project• Thermal insulation to BPs Clair Ridge project• Thermal insulation to Totals Martin Linge project

SUBSEA FACILITIESSUBSEA PROCESSING

RISERS, FLOWLINES & TIE-INS

Contact person: Camilla Østnæs OlsenTitle: Marketing Communications ManagerE-mail address: camilla.olsen@trelleborg.comCompany website: trelleborg.com/offshore44

Wirescan AS

Wirescan AS provides products and services for diagnosis and condition assessment of electrical cables, based on our patented technology LIRA.The LIRA technology can be regarded as a tool for Risk Management, Cost Control, and Asset Management for Cables and Umbilicals. - By knowing the condition of your cables, you are able to handle faults and weaknesses in a controlled matter, rather than having to fire fight when sudden severe incidents occur.- You will also have the tool to prioritize which cables and umbilicals to repair or replace during a budget period, based on your knowledge on their individual condition.- Cables and umbilicals represent a huge value to the company, and should be part of the Asset Management System. By using LIRA for frequent condition assessments, you will be able to attach relevant data about the individual cable’s condition and development over time, into the system.

PRODUCTS:Instruments based on the LIRA technology for doing Monitoring, Condition Assessments and Fault Location on Cables and Umbilicals.

SERVICES:• Cable and Umbilical Diagnostics• Cable and Umbilical Fault Location• Cable and Umbilical Monitoring• Cable and Umbilical Condition Assessments

REFERENCES:Wirescan deliver products and services to a lot of the main companies handling the cables and umbilical through their whole life cycle. Cable Manufacturers, Installation companies, Service Providers and Oil&Gas Operators.Among our customers are companies like Nexans, NKT, ABB, Technip, Shell, Total, BP, Statoil.

TECHNICAL SERVICES

Contact person: Stefan JohnsenTitle: Sales Manager SubseaE-mail address: Stefan.johnsen@tess.noCompany website: tess.no 45

Source: Technip

Source: Subsea 7

46

Backpage image: Source: FMC Technologies.

Galston Design: www.galston.no

Source: Kongsberg Oil & Gas

INTSOK, OsloHoffsveien 23, 2nd floor P.O. Box 631 Skøyen NO-0214 OsloNorwayPhone: +47 22 06 14 80

INTSOK, StavangerProf. Olav Hanssensvei 7a P.O. Box 8034NO-4068 Stavanger NorwayPhone: +47 51 87 48 80

INTSOK, Bergen Visiting Address: Godvikveien 58NO-5179 GodvikNorwayPhone: +47 90 56 03 35

INTSOK@INTSOK.COM WWW.INTSOK.COM

PROMOTING NORWEGIAN OIL AND GAS CAPABILITIES IN INTERNATIONAL MARKETS