spw600/e casement window system - find, research and select, uk … · 2012-04-23 · senior...
TRANSCRIPT
SPW600/e casement window system
10468.09 SAS TECHNICAL 2PP_NEW_WINDOWS.qxp:Layout 1 6/3/12 13:57 Page 9
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SPW600 and SPW600e casement window has beendesigned to meet current building regulations. This is a threechamber 75mm polyamide window system that achievesimpressive thermal performance. It is capable of acceptingglazing up to 56mm thick depending on weight.
SPW600eThis system is an evolution of SPW600 and has been furtherimproved by the introduction of polystyrene and backer rodinserts. A wide range of sections and ironmongery allows thewindow system to be versatile and used in a wide range ofapplications.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SPW600 and SPW600e casement windows sections areavailable typically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
Both SPW600 and SPW600e are constructed using mitredcorners, joined with crimped or mechanical cleats; alignmentchevrons assist in clean, accurate mitres. Integral transomsand mullions are scribed around the outer frames and fixedwith either screw ports or shear blocks. A proprietary sealantis used on all metal joints in line with good practice.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SPW600 and SPW600e when used on projectsinvolved in a BREEAM assessment, or within the Codefor a Sustainable Built Environment and the Code forSustainable Homes (which therefore involves the GreenGuide to specification) can offer significant benefits. 'A'rated windows are available under both the GreenGuide and the Window Energy Rating methodology.
SPW600 and SPW600e are capable of achieving aBFRC energy rating of A, B & C. For project specificassistance, please contact our specification team.
to
Air Permeability
Water Tightness
Wind Resistance
600 Pa
600 Pa
2400 Pa
Fixed Vent
Vent
1200 x 1200
1.45W/m2K
1.65W/m2K
1500 x 1500
1.40W/m2K
1.57W/m2K
Fixed Vent
Vent
1200 x 1200
1.36W/m2K
1.54W/m2K
1500 x 1500
1.33W/m2K
1.48W/m2K
Thickness 26mm 56mm
Weather Rating
BS6375 Part 1
Typical* sizes
Glazing
Tested to BS7950, security hardware required
Security
Average U values - SPW600
Average U values - SPW600e
Top Hung
Side Hung
Width (mm)
1500
900
Height (mm)
1500
1500
x
x
*For guidance only - when exceeded please consult our technical department.
10468.09 SAS TECHNICAL 2PP_NEW_WINDOWS.qxp:Layout 1 12/3/12 15:26 Page 10
SPW600/e tilt/turn window system
10468.09 SAS TECHNICAL 2PP_NEW_WINDOWS.qxp:Layout 1 6/3/12 13:57 Page 11
toThickness 26mm 56mm
Typical* sizes
Glazing
Tested to BS7950, security hardware required
Security
Maximum Sizes
Tilt/Turn
Tilt/Turn Heavy Duty
Width (mm)
1500
1500
Height (mm)
1500
2200
x
x
Air Permeability
Water Tightness
Wind Resistance
600 Pa / Class C
600 Pa
2400 Pa
Weather Rating
BS6375 Part 1
Minimum Sizes
Tilt/Turn
Width (mm)
450
Height (mm)
500x
*For guidance only - when exceeded please consult our technical department.
Vent
Fixed
1200 x 1200
1.67W/m2K
1.49W/m2K
1500 x 1500
1.59W/m2K
1.44W/m2K
Average U valuesSPW600
Vent
Fixed
1200 x 1200
1.57W/m2K
1.39W/m2K
1500 x 1500
1.49W/m2K
1.34W/m2K
SPW600e
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SPW600 and SPW600e tilt/turn window has beendesigned to meet current building regulations. This a threechamber 75mm polyamide window system that achievesimpressive thermal performance. It is capable of acceptingglazing up to 56mm thick depending on weight.
SPW600eThis system is an evolution of SPW600 and has been furtherimproved by the introduction of polystyrene and backer rodinserts. A wide range of sections and ironmongery allows thewindow system to be versatile and used in a wide range ofapplications.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SPW600 and SPW600e tilt / turn window sections are availabletypically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
Both SPW600 and SPW600e are constructed using mitredcorners, joined with crimped or mechanical cleats; alignmentchevrons assist in clean, accurate mitres. Integral transomsand mullions are scribed around the outer frames and fixedwith either screw ports or shear blocks. A proprietary sealantis used on all metal joints in line with good practice. Openingwindow frames are designed to be inserted into outer framesusing butt hinges or tilt and turn mechanism.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SPW600 and SPW600e when used on projectsinvolved in a BREEAM assessment, or within theCode for a Sustainable Built Environment and theCode for Sustainable Homes (which thereforeinvolves the Green Guide to specification) can offersignificant benefits.
SPW600 and SPW600e are capable of achieving aBFRC energy rating of A, B & C. For project specificassistance, please contact our specification team.
10468.09 SAS TECHNICAL 2PP_NEW_WINDOWS.qxp:Layout 1 12/3/12 15:25 Page 12
SPW600/e overswing window system
10468.09 SAS TECHNICAL 2PP_NEW_WINDOWS.qxp:Layout 1 6/3/12 13:58 Page 13
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SPW600 and SPW600e overswing window has beendesigned to meet current building regulations. This a threechamber 75mm polyamide window system that achievesimpressive thermal performance. It is capable of acceptingglazing up to 56mm thick depending on weight.
SPW600eThis system is an evolution of SPW600 and has been furtherimproved by the introduction of polystyrene and backer rodinserts. A wide range of sections and ironmongery allows thewindow system to be versatile and used in a wide range ofapplications.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SPW600 and SPW600e overswing window sections areavailable typically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
Both SPW600 and SPW600e are constructed using mitredcorners, joined with crimped or mechanical cleats; alignmentchevrons assist in clean, accurate mitres. Integral transomsand mullions are scribed around the outer frames and fixedwith either screw ports or shear blocks. A proprietary sealantis used on all metal joints in line with good practice. Openingwindow frames are designed to be inserted into outer framesusing specialist stays.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Environmental
Senior Architectural Systems is fully compliant withBS EN ISO19001, BS EN ISO 14001 and OHSAS18001 Standards.
SPW600 and SPW600e when used on projectsinvolved in a BREEAM assessment, or within theCode for a Sustainable Built Environment and theCode for Sustainable Homes (which thereforeinvolves the Green Guide to specification) can offersignificant benefits.
SPW600 and SPW600e are capable of achieving aBFRC energy rating of A, B & C. For project specificassistance, please contact our specification team.
to
Air Permeability
Water Tightness
Wind Resistance
600
600
2400
Thickness 26mm 56mm
Weather Rating
BS6375 Part 1
Glazing
Tested to BS7950, security hardware required
Security
Typical* sizes
Overswing Open Out
Width (mm)
1500
Height (mm)
1600x
*For guidance only - when exceeded please consult our technical department.
Vent
Fixed
1200 x 1200
1.82W/m2K
1.51W/m2K
1500 x 1500
1.70W/m2K
1.43W/m2K
Average U valuesSPW600
Vent
Fixed
1200 x 1200
1.68W/m2K
1.39W/m2K
1500 x 1500
1.58W/m2K
1.34W/m2K
SPW600e
10468.09 SAS TECHNICAL 2PP_NEW_WINDOWS.qxp:Layout 1 12/3/12 15:24 Page 14
Senior Architectural Systems Ltd, Eland Road, Denaby Main, Doncaster, South Yorkshire, DN12 4HA.Tel: 01709 772 600. Fax: 01709 772 601. E-mail: [email protected] www.seniorarchitectural.co.uk
Scope
The SPW600 and SPW600e door has been designed toprovide an enhanced performance door capable of beingmanufactured in single, double, inward or outward opening andutilising low thresholds producing a variety of options to suitmost applications. It is a 75mm thermally broken polyamidedoor system achieving improved thermal performance. Theycan accept glazing up to 56mm thick depending on weight.
Materials
• All aluminium sections are extruded using Aluminium Alloy6060 or 6063 T6 to BS EN 755 part 9 2008.
• Polyamide thermal barriers are manufactured in accordancewith PA66 GF25.
• Gaskets are manufactured in accordance with BS3734.
Finishes
SPW600 door sections are available typically in 3 finishes.
• Polyester Powder Coating to BS EN 12206: 2004 Part 1 -painted in house in single or dual colour and surface finishat 40 microns standard, or enhanced to 60 microns formarine environments, in accordance with ISO9001,ISO14001 and ISO18001.
• Anodised and Anolok finishes are to BS3897: 1991 to aminimum of 25 microns (AA25), supplied in either satin orpolished finish in a limited range of colours.
• Mill finish.
Construction
The SPW600 and SPW600e door is constructed using mitredcorners, joined with crimped or mechanical cleats; alignmentchevrons assist in clean, accurate mitres. Integral transomsand mullions are scribed around the outer frames and fixedwith either screw ports or shear blocks. A proprietary sealantis used on all metal joints in line with good practice. Openingdoor frames are designed to be inserted directly into theouter frames using face mounted hinges and hook looks.
Due to a policy of continual product development, Senior Architectural Systems Ltd reserves the right to alter any of the specifications given in this publication without prior notice. The specification for any given application must bechecked with Senior Architectural Systems Ltd prior to manufacture. No responsibility for accuracy is accepted by Senior Architectural Systems Ltd.
Specification. Please contact our national teamof architectural advisors for advice on productsuitability, calculations and NBS or bespokespecifications.
Environmental
Senior Architectural Systems is fully compliant with BS ENISO19001, BS EN ISO 14001 and OHSAS 18001 Standards.
SPW600 and SPW600e when used on projects involved in aBREEAM assessment, or within the Code for a SustainableBuilt Environment and the Code for Sustainable Homes(which therefore involves the Green Guide to specification)can offer significant benefits. For project specific assistance,please contact our specification team.
toThickness 28mm 56mm
Weather RatingDiffering door configurations produce different ratings.
Please consult our technical department.
Max Door Sizes
Glazing
PAS23-1: 1999; PAS24-1: 1999, security hardware required
Security
Single Door
Double Door
Width (mm)
1000
2000
Height (mm)
2400
2400
x
x
*For guidance only - when exceeded please consult our technical department.
Min Sash Height Using 3 Point Lock 1756mm
Min Sash Height Using Shoot Bolts 2056mm
Max Sash Height Using Shoot Bolts 2247mm
Max Weight Per Door Leaf 75kgs
O/I
O/O
Single
1.93W/m2K
1.92W/m2K
Double
1.86W/m2K
1.87W/m2K
Average U valuesSPW600
O/I
O/O
Single
1.55W/m2K
1.66W/m2K
Double
1.53W/m2K
1.64W/m2K
SPW600e
10468.09 SAS TECHNICAL 2PP_NEW_DOORS.qxp:Layout 1 12/3/12 15:18 Page 6