A LEADERSHIP IN DRY COOLING TECHNOLOGIES

SPX DRYCOOLINGSYSTEMS

2

THE POWER FOR YOUR FUTURE

As the world grows, so does its need for electricity – and more sustainable energy production.

SPX Dry Cooling helps to meet that demand with a broad range of highquality, custom-engineered systems and compo-nents that can support improving efficiency and reducing the use of natural resources.

WHERE THE POWER IS

• SPX Dry Cooling power plant engineering components and systems are at work in gas, nuclear and coal-fired plants as well as in renewable energy applications, helping to optimize plant performance and reduce emissions.

• SPX Dry Cooling helps new and existing power plants to improve heat exchange efficiency, reduce water consumption and enhance flue gas systems performance.

• SPX Dry Cooling contributes expertise and equipment to build smarter, more efficient and more resilient power generation facilities.

POWER INFRASTRUCTURE

Design, manufacture and service highly engineered systems for gas, coal, solar, geothermal and waste to energy power generation plants.

Primary products:• Dry and Wet Cooling Systems • Air cooled Heat Exchangers

• World Technological & Innovation leader in the Dry domain with numerous patents and products

• More than 1.000 references of Dry coolers and condensers, spanning on all continents and under all climates

• Work force of 600+ professionals uniquely dedicated to the Dry business across the globe

• Member of Paharpur Group, a leading provider in Process Cooling Systems since 1948 with over 45.000 installations

3

Direct CoolingDirect and Indirect

CoolingDirect Cooling Direct Cooling

Direct Dry Cooling

SPX Dry Cooling is a leading global brand in Air-Cooled Condenser design, manufacturing, construction and services.

More than 1000 SPX Dry Cooling Systems for Combined Cycle, Coal, Natural Draft Condenser, Parallel Condenser System and Solar Power Plants have been installed around the world for a wide range of environmental conditions: coastal and desert climates, industrial and urban locations in both tropical and arctic temperatures.

SPX Dry Cooling, with its fully owned heat exchanger manufacturing plants, maintains a world class reputation of reliability and efficiency in power generation and industrial applications for large and small size plants.

Paharpur Group Renewable

Energy

Timber Products

Real EstateProcess

Cooling SolutionsFlexible

Packaging

Dry CoolingEvaporative

Cooling

Gas Coal SolarBiomass

WasteGeothermal

4

Combined Cycle Power Plants

Turano Lodigiano Italy800 MW

Alba Bahrain820 MW

Goreway Canada800 MW

Rio Bravo Mexico3 x 515 MW

CH

ALL

ENG

ES

• High operating flexibility• Operating cost• Diverse and challenging climates, from hot to freezing

conditions• Strict environmental imposition, including low noise

BEN

EFIT

S

• Elimination of additional water usage from the condensing power cycle

• Excellent corrosion and freeze resistance• Long-term mechanical and thermal integrity• Low fan power consumption• Flexibility in power plant site selection• Decreased time required for plant permitting

Concentrated Solar Power Plants

Hassi R’Mel Algeria150 MW

Ain Beni Mathar Moroco470 MW

Ivanpah USA 392 MW

Tonopah USA 125 MW

CH

ALL

ENG

ES

• High operating flexibility• Minimize operation and maintenance cost• Hot, arid and dusty enviornment with large solar

irradiation

BEN

EFIT

S

• Elimination of additional water usage from the condensing power cycle

• Long-term mechanical and thermal integrity• Low fan power consumption• Specific solution dedicated to solar tower systems

Biomass, Waste to Energy, Cogeneration Plants

Terras de Santa Maria Portugal35 MW

Prayon Belgium15 MW

Alkmaar Netherlands28 MW

Roosendaal Netherlands35 MW

CH

ALL

ENG

ES

• Low noise• Limited plot• Provide cost effective solution – reduce operating cost• Maximize air-cooled condenser performance

BEN

EFIT

S

• Elimination of additional water usage from the condensing power cycle

• Low noise product• Reduced height of air-cooled condenser• Reduced power consumption• Maintain performance in windy conditions• Low sensitivity to freezing• Flexibility in power plant site selection

5

Coal Fired Power Plants – Air-Cooled Condenser System

Zhenglan China2 x 600 MW

Wuxiang China2 x 600 MW

Wygen USA110 MW

Lanzhou Lanlü China3x300 MW

CH

ALL

ENG

ES

• Large capacity steam condensing for maximum electrical output

• Coal mine areas in dusty and corrosive environment• Diverse and challenging climates, from hot to freezing

conditions with risks of mechanical wear• Base load operation requiring high availability B

ENEF

ITS

• High efficiency thermal cycle with low back pressure and low power consumption for maximum heat rate

• High performance finned tubes with excellent cleaning ability for long term availability

• A-Frame supported tube bundles, allowing heat exchanger free thermal expansion for maximum reliability

COAL FIRED POWER PLANTS – INDIRECT DRY COOLING SYSTEM

Kendal South Africa6 x 690 MW

Zuoquan China2 x 660 MW

WuAn China2 x 300 MW

Qinling China2 x 600 MW

CH

ALL

ENG

ES

• Large capacity steam condensing for maximum electrical output

• Coal mine areas in dusty and corrosive environment• Diverse and challenging climates, from hot to freezing

conditions with risks of mechanical wear• Base load operation requiring maximum availability

and lowest operation costs

BEN

EFIT

S

• Low parasitic power requirements• Heat transfer performance ensured on the long run• Robust equipment requiring low maintenance• Fast and efficient assembly and installation

CANADA 1.470 MWMEXICO 4.240 MW USA 16.489 MWARGENTINA 240 MWPERU 1.630 MW VENEZUELA 1.000 MW AMERICANAS 25.069 MW

GANSU 2.800 MWHEBEI 1.860 MWHENAN 2,010 MWINNER MONGOLIA 18.580 MWJILIN 2.400 MWNINGXIA 2.400 MWSHANXI 19.105 MWSHAANXI 4.620 MWXINIANG 7.090 MW CHINA 60.865 MW

BANGLADESH 200 MWINDIA 20.120 MWINDONESIA 420 MWIRAN 600 MWJAPAN 330 MWKOREA 105 MWMALAYSIA 300 MWPAKISTAN 130 MWTAIWAN 2 .580 MWVIETNAM 250 MW

INDIA/APAC 25.035 MW

TOTAL : 150.650 MW (PROJECT > 100 MW)

BELGIUM 1.150 MWGREECE 550 MWIRELAND 790 MWITALY 6.532 MWLUXEMBURG 360 MW NETHERLANDS 570 MWSPAIN 1.100 MW UK 5.037 MW EUROPE 16.089 MW

ALGERIA 6,150 MW BARHAIN 800 MWISRAEL 1.720 MWJORDAN 1.217 MWMOROCCO 470 MWSOUTH AFRICA 8.980 MWSYRIA 660 MWTURKEY 760 MWSAUDI ARABIA 2.130 MW

AFRICA & 22.887 MW MIDDLE EAST

17 %

14 %

40 %

18 %

11 %

6

Direct Dry Cooling Systems (ACC)

Air Cooled Condenser (ACC)

Directly condenses the steam turbine exhaust flow and returns condensate to the boiler without water loss. The steam is directly condensed inside air-cooled finned tubes without using an intermediate surface condenser.ACCs are used in utility, industrial and renewables markets for large and small size plants. SPX Dry Cooling designs, manufactures and constructs traditional A-Frame ACC as well as our innovative Hexacool©® ModuleAir™, and Natural Draft Condenser using high efficiency SRC® finned tubes.

A-Frame ACC Features

Traditional A-Frame, with near than 1000 installations in the world, is the state-of-the-art ACC, suitable for small to large power plant in a large variety of site condition (low ambient temperature, high wind, high seism, low noise). SPX Dry Cooling, A-Frame ACC, with fee-expansion tube bundles supported by an A-Frame structure, can be mounted on concrete or steel structure.

Hexacool®

Hexacool is a standardized, modular ACC system for small power plants, from few megawatts to several hundred megawatts. Hexacool induced draft ACC is easy to construct, has a reduced height, and low wind sensitivity.

ModuleAir® ACC

ModuleAir is a modular SRC air cooled condenser design, featuring factory assembled structural components, duct, and modular heat exchanger bundles. With construction savings of up to 25% versus the conventional A-Frame ACC design, construction time can be reduced by several months for large power plants. ModuleAir can also achieve lower steam turbine back pressure and increase power production at low ambient air temperatures.

Natural Draft Condenser

Natural Draft Condenser is an air cooled condenser where fans are replaced by natural draft tower reducing drastically the electrical power consumption of the ACC and rotating parts needed.

Indirect Dry Cooling Tower (IDCT)

Indirect dry condensing system coupling a dry cooling tower with a steam surface or jet condenser and suited for any large capacity condensing units. Thanks to tall concrete shell, Hot air recirculation is avoided, the auxiliary is power reduced, and only a few rotating part are need. This translates into low maintenance and high availability.

Dry Cooling Advantages

• No need for water availability on site

• Environmental regulations for water saving

• Respect environmental regulations, limiting the temperature increase in rivers, lakes and oceans

• Flexibility in the selection of the power plant site (grid proximity, land cost, fuel source proximity)

• Life expectancy exceeding power plant life

• Reduced operation and maintenance cost

• Shorter lead-time for power plants permits and consequently for start-up

B

T G

Condensate

Hexacool

ModuleAir ACC

B

T G

Condensate Cooling water

7

Application Project Products Country MW Year

Gas Application

Combined CyclePower Plants

Ain Arnat Combined Cycle Power Plant Algeria 1200 2015

San Luis de la Paz Combined Cycle Power Plant Mexico 205 2014

Samra III Combined Cycle Power Plant Jordan 140 2014

Dominion – Warren County Combined Cycle Power Plant USA 1329 2013

Denizli Combined Cycle Power Plant Turkey 200 2012

Chilca Uno Combined Cycle Power Plant Peru 810 2011

Deer Creek Combined Cycle Power Plant USA 300 2011

Kallpa Combined Cycle Power Plant Peru 832 2011

Riyadh Combined Cycle Power Plant Saudi Arabia 1700 2011

Al Qatrana Combined Cycle Power Plant Jordan 400 2010

Torino North Combined Cycle Power Plant Italy 400 2010

Turano Lodigiano Combined Cycle Power Plant Italy 800 2009

Solar Application

Concentrated SolarPower Plants

Xina Solar One Solar Power Plant South Africa 100 2015

Paulputs - Kaxu Solar One Concentrated Solar Power Plant South Africa 115 2013

Genesis Solar Energy Project Solar Power Plant USA 250 2012

Upington Solar Power Plant South Africa 50 2012

Hassi R’Mel Solar Integrated Combined Cycle PP Algeria 150 2009

Renewables Application

Biomass, Waste to EnergyPower Plants

Lisahally Biomass Power Plant Ireland 40 2015

Palm Beach Waste Incineration Power Plant USA 150 2013

Sleaford Biomass Power Plant UK 38 2013

Riverside Waste to Energy Power Plant UK 243 2010

Dordrecht Waste to Energy Power Plant Netherlands 35 2009

Coal Application

ACC Coal FiredPower Plants

Babelan Coal Fired Power Plant Indonesia 280 2015

Fujian Henglian* Coal Fired Power Plant China 1320 2015

Tuyou 2* Coal Fired Power Plant China 1320 2015

Hami Danahu* Coal Fired Power Plant China 1320 2014

Tianye Coal Fired Power Plant China 660 2013

Wyodak Coal Fired Power Plant USA 330 2011

Rio Turbio Coal Fired Power Plant Argentina 240 2010

Zhenglan 3 Coal Fired Power Plant China 1200 2010

Coal Application

IDCT Coal FiredPower Plants

Yangling* Coal Fired Power Plant China 700 2015

Junzheng* Coal Fired Power Plant China 984 2014

Wu’an Coal Fired Power Plant China 600 2012

Qinling Coal Fired Power Plant China 1200 2011

Selected Dry Cooling References

* Shanghai Electric – SPX Engineering and Technologies Co. Ltd,

8

SPX Dry Cooling Belgium SPRLAvenue Marcel ThiryB-1200 BrusselsBelgiumT  +32 (0)2 761 61 11

Paharpur Europe SAVia Laveggio, 3CH-6855 StabioSwitzerlandT  +41 91 980 42 06

SPX Dry Cooling USA, LLC 7450 West 130th Street, Suite 310 Overland Park, KS 66213United States T  +1 913 685 0009

Paharpur Cooling Towers Limited Paharpur House 8/1/B Diamond Harbour RoadKolkata 700027, IndiaT  +91 33 4013 3000

SPX Dry Cooling Italia SRLLungolago di Calcinate 88I-21100 VareseItalyT  +39 0332 150 5948

Paharpur SPX Dry Soğutma Tic. Ltd. Şti.Sair Esref Bulv. 22/81235210 Konak, İzmir, TurkeyT  +90 (232) 483 07 79

SPX Dry Cooling USA, LLC 1200 US Rt. 22 East, Suite 1 Bridgewater, NJ 08807 United StatesT  +1 908 450 8008

SPX Dry Cooling BeijingRoom 402, Block B, First Shanghai Center, No. 39 Liangmaqiao Road, Chao Yang District, Beijing 100125, ChinaT  +86 10 5676 8368

SPX Dry Cooling SpainAvenida de Europa 1428108 Alcobendas, Madrid SpainT  +34 911 890 518

SPX Dry Cooling - Paharpur Korea11F, Samsung Life Insurance Yoido Building24, Kukjegeumyung-Ro 2-Gil, Yeongdeungpo-Gu0732 Seoul, KoreaT  +82 (0)2 6297 5030

Paharpur USADenver International Business Center 18300 East 71st Avenue, Suite 135Denver, CO 80249United States T  +1 303 989 7200

Paharpur Nigeria FZEDangote Industries Free Zone Development CompanyLekki Coastal RoadIbeju-Lekki, Lagos, NigeriaT  +41 78 754 17 41

EMEASPX Dry Cooling Belgium SPRLAvenue Marcel ThiryB-1200 BrusselsBelgiumT  +32 (0)2 761 61 11

APAC AMERICAS SPX Dry Cooling USA, LLC 7450 West 130th Street, Suite 310 Overland Park, KS 66213United States T  +1 913 685 0009

Paharpur Europe SAVia Laveggio, 3CH-6855 StabioSwitzerlandT  +41 91 980 42 06

SPX Dry Cooling BeijingRoom 402, Block B, First Shanghai Center, No. 39 Liangmaqiao Road, Chao Yang District, Beijing 100125, ChinaT  +86 10 5676 8368

SPX Dry Cooling USA, LLC 1200 US Rt. 22 East, Suite 1 Bridgewater, NJ 08807 United StatesT  +1 908 450 8008

PAHARPUR & SPX DRY Soğutma Tic. Ltd. Şti.Sezer Dogan Sk. 20/1135210 Konak, IzmirTurkeyT  +90 (232) 483 0 779

SPX Dry Cooling Korea11F, Samsung Life Insurance Yoido Building24, Kukjegeumyung-Ro 2-Gil,Yeongdeungpo-Gu, Seoul 07325KoreaT  +82 (0)2 6297 5030

Paharpur USADenver International Business Center 18300 East 71st Avenue, Suite 135Denver, CO 80249United States T  +1 303 989 7200

SPX Dry CoolingGLOBAL NETWORK

SPXDC-DC03 ©2018 SPX DRY COOLING

A Global Partner with the Promise of Excellence

Global Locations Paharpur Headquarters Kolkata

SPX Dry Cooling Headquarters Brussels

Manufacturing Plants

Joint Venture

EMEASPX Dry Cooling Belgium SPRLAvenue Marcel ThiryB-1200 BrusselsBelgiumT  +32 (0)2 761 61 11

APAC AMERICAS SPX Dry Cooling USA, LLC 7450 West 130th Street, Suite 310 Overland Park, KS 66213United States T  +1 913 685 0009

Paharpur Europe SAVia Laveggio, 3CH-6855 StabioSwitzerlandT  +41 91 980 42 06

SPX Dry Cooling BeijingRoom 402, Block B, First Shanghai Center, No. 39 Liangmaqiao Road, Chao Yang District, Beijing 100125, ChinaT  +86 10 5676 8368

SPX Dry Cooling USA, LLC 1200 US Rt. 22 East, Suite 1 Bridgewater, NJ 08807 United StatesT  +1 908 450 8008

PAHARPUR & SPX DRY Soğutma Tic. Ltd. Şti.Sezer Dogan Sk. 20/1135210 Konak, IzmirTurkeyT  +90 (232) 483 0 779

SPX Dry Cooling Korea11F, Samsung Life Insurance Yoido Building24, Kukjegeumyung-Ro 2-Gil,Yeongdeungpo-Gu, Seoul 07325KoreaT  +82 (0)2 6297 5030

Paharpur USADenver International Business Center 18300 East 71st Avenue, Suite 135Denver, CO 80249United States T  +1 303 989 7200

HEADQUARTERS

SPX Dry Cooling Belgium SPRLAvenue Marcel Thiry 81, B2B-1200 Brussels, BelgiumT +32 (0) 2 761 61 11F +32 (0) 2 761 61 86

info@spxdrycooling.comwww.spxdrycooling.com MEM BER OF

Denver, USA

Overland Park, USA

Mexico City, Mexico

Bridgewater, USA Stabio, SwitzerlandVarese, Italy

Madrid, Spain

Lagos, Nigeria

Brussels, Belgium

Kolkata, India

Shanghai, China

Seoul, Korea

Zhangjiakou, China

Baroda, India

Izmir, TurkeyBeijing, China