sr_working_2013_en.pdf

CATALOGUE 2O13/14 EN SINGING ROCKPROFESSIONAL

2content

SINGING ROCK is one of the world leaders on themarket of professional protective equipment for workat heights, military and rescue. The range of equip-ment available includes harnesses, ropes, hardware,rappeling devices, safety equipment for heights,anchor points, life lines and sets for typical worksituations. All of the high-performance and innovative productsare developed and produced in Czech Republic. Theproducts are certified and fully comply with the inter-national industrial safety standards.Our products are innovative, modern and easy to use,with great strength and with maximum comfort...

Equipment for workat height, militaryand rescue

Photo cover: Off-shore oil platform, Norway Photo: BilderPhoto this page: Helicopter Show 2011, Hradec Krlov, Czech Republic Photo: Borek Nechanick

harnesses ropes connectors helmets anchor devicesslings lanyards

accessories& promotional

workingactivities

4 18 26 32 36 52 62

SINGINGROCK was

founded in 1992.During 20 years of its

existence, Singing Rock hasestablished itself as a pro-

fessional and innovative producerand supplier of personal fall protective

equipment. Nowadays SINGING ROCK is one ofthe world leaders on the market of professional

protective equipment for work at height, military andrescue. The range of equipment available includes harnesses,

ropes, hardware, rappeling devices, safety equipment for heights,anchor points, life lines and sets for typical work situations. All of the

high-performance and innovative products are developed and produced inCzech Republic, Europe. The products are certified and fully comply with the

international industrial safety standards. Ourproducts are innovative, modern and easy touse, with great strength and with maximumcomfort...

SINGING ROCK specializes in its production on: Development and production of climbing andmountaineering equipment (harnesses, moun-taineering ropes, belay and rappel devicescarabiners, helmepts, ice axes, crampons etc.) Development and production of professionalequipment for working in height (harnesses,ropes, connectors, anchor devices, helmets,lanyards and fall absorbers) Methodology and preparation of rope accessand secure anchor systems Supply or development of suitable safetyequipment Training services Follow-up service - regular product inspection

All activities at Singing Rock run under QMScertification according to ISO 9001 standardswith special attention to development, produc-tion and sales of Personal Fall ProtectiveEquipment.(Article 11B of Council Directive 89/686/EEC).SINGING ROCK products fulfil appropriate EUdirectives and standards and requirements ofUS market (CE, NFPA and ANSI). Singing Rockactively participates in preparation of thesestandards and directives by its work in theUIAA Safety Commission and CEN workinggroup.SINGING ROCK also cooperates with CzechStandard Organization as an expert in the fieldof standards for personal protective equip-ment.SINGING ROCK simply has everything what youneed for your Personal Protective Equipment toprevent falling (PPE) and for permanent fallprotection.

3

icons

These icons will help you to choosethe proper harness regarding the mostcommon and most situable use:

rope access

rescue

work restraint

fall arest

intervention

rope park

tree care

CRWFIPA



workingactivities

4 18 26 32 36 52 62

harnesses

SINGING ROCK makes harnesses which are very com-fortable, simple to use and suitable for every workingsituation for workers at height. Thanks to the innovat-ed technologies and smart solutions, SINGING ROCKcan offer a full range of safety harnesses covering allareas of working applications. SINGING ROCK harnesses are exclusively manufac-tured in Czech Republic.

Rock&Lockpatented smart buckle systemEasy to lock and open: Only a smallamount of finger pressure is needed tolock and to open. Fast lace-through: Make the loop, put

it through the buckle frame, hook theloop on the cross bar and tighten. Itsas easy as that.

Smart function: Rock&Lock allows youto put on your harness very quickly

Double safety: Webbing cannot slipthrough Rock&Lock due to a safetyloop at the end of the webbingSpontaneous opening of Rock&Lock isvirtually impossible.

Lightweight and extra strong. Excellent operation in all-season con-

ditions: Operation guaranteed evenwhen webbing is wet or frozen.

Easy-lock buckleSmooth adjustingUnique buckle with a sliding captive barmatches strict American standards (ANSI,CSA). Its minimum strength is 17.2 kN. Nowebbing slippage in a buckle. Its construc-tion ensures longtime operation and effi-ciency (easy releasing and fastening evenwhen dirty and tough webbing). Corrosionresistance is tested by spraying in a saltychamber for a period of 48 hours.

SPEED buckle1 second buckleSINGING ROCK SPEED buckle is the sidequick release buckle. Easy operation Durable and adjustable Made from steel Matches strict American standard ANSI Impossible opening under the loading Impossible to lock when the strap is

twisted Strap width up to 45 mm Black coated Strength 18 kN

5Singing Rock - new dimension harnesses

Attachment points for lowering

Name tag + identification

Slots for carabiners

Attachment points accordingEN 361. Steel D-rings witha bearing capacity of 15 kN.

Positioning points are placed insymmetrically according to EN358, tested for 15 kN strength.Light alloy D-rings are movableinto so-called parking position, thus avoiding undesired catch-ing during work.

Additional loops with a bearingcapacity of 5 kg offer additional space for the gear and bettergear management.

Narrowed padding and webbingaround the neck enhance comfort

EASY LOCK buckle with a captivebar matches strict American stan-dards (ANSI, CSA). Its minimumstrength is 17.2 kN. No webbingslippage in a buckle. Its construc-tion ensures longtime operation andefficiency (easy releasing and fas-tening even when dirty and toughwebbing). Corrosion resistance istested by spraying in a salty cham-ber for a period of 48 hours.

HYPNOS key lock carabinerK0007 for connection of cheststraps with waist belt.

On the back: slots in the waistbelt webbing provide securepoints from which to hang heavyequipment (e.g. power saws,drills etc.) as well as slots for thePorter plastic carabiner.

Front and back attachment pointsmeet the requirements of EN813.

Braided gear loops with a bear-ing capacity of 10 kg provideenough space for 10 pieces ofHMS carabiners.

Anatomic leg loops padding

Elastic strap for holding shoulderwebbing.

Positioning D rings

Sleep (parking position)

Work

6rope access

W0045BRW0045BB - black version CFIREXPERT II speedFully adjustable and removable harness for a ropeaccess with padded waist belt, leg loops and shoulderstraps. Suitable for working positioning, fall arrest andwork restraint situations. The Expert II harness is mod-ular where it is possible to use only as a sit harness. innovated SPEED buckles enable fluent and fast

adjustment to fit to users body shoulders straps are connected with the waist belt

by screw carabiner and a buckle in a rear shoulder straps can be totally removed and the

harness can be used only as a sit harness anatomic waist belt, leg loops and shoulder straps

padding shoulders straps and leg loops are independently

adjustable narrowed padding and webbing on the shoulder

straps in a neck area enhance a comfortable work front and back attachment points for fall-arrest

according to EN 361 front lower attachment point for descender place-

ment or work positioning according to EN 813 2 side attachment points for work positioning

according to EN 358 2 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg

offer additional space for the gear and better gearorientation.

the leg loops construction insure enough comfort inbark area

specially shaped waist loop and leg loops flat rear attachment point does not bear on usersback when carrying backpack or breathing apparatus identification and methodical label

Size: S, M/L, XLWeight: (M/L) 2430 g ( 15 g) 85.72 oz (0,5 oz)CE 1019 EN 358 EN 813 EN 361

W0044BRW0044BB - black version CFIREXPERT II standard standard easy-lock buckles enable fluent and fast

adjustment

Size: S, M/L, XLWeight: (M/L) 2130 g ( 15 g) 75.13 oz (0,5 oz)CE 1019 EN 358 EN 813 EN 361

W0070BR CFIREXPERT II steel speed innovated SPEED buckles enable fluent and fast

adjustment to fit to users body the harness is made in an accordance with a strict

American standards (NFPA, ANSI) corrosion resistance of all steel components is test-

ed by spraying in a salty chamber for a periond of48 hour

Size: S, M/L, XLWeight: (M/L) 2730 g ( 15 g) 96.3 oz. ( 0,5 oz)CE 1019 EN 358 EN 813 EN 361NFPA Class III ANSI Z359.1

EXPERT II speed

EXPERT II standard blackEXPERT II steel speed

7rope access harnesses

W0042BRW0042BB - black version CFIRPROFI WORKER speedFully adjustable harness for a rope access withpadded waist belt, leg loops and shoulder straps.Suitable for work positioning, fall arrest and workrestraint situation. innovated SPEED buckles enable fluent and fast

adjustment to fit to users body anatomic waist belt, leg loops and shoulder straps

padding narrowed padding and webbing on the shoulder

straps in a neck area enhance a comfortable work front and back attachment points for fall-arrest


ment or work positioning according to EN 813 2 side attachment points for work positioning

according to EN 358 2 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg



specially shaped waist loop and leg loops flat rear attachment point does not bear on users back

when carrying backpack or breathing apparatus identification and methodical label

Size: S, M/L, XL Weight: (M/L) 1720 g (15 g) 60.67 oz. (0,5 oz)CE 1019 EN 358 EN 813 EN 361

W0041BRW0041BB - black version CFIRPROFI WORKER standardFully adjustable and removable harness for a ropeaccess with padded waist belt, leg loops and shoulderstraps. Also suitable for work positioning, descent,ascent and rescue situations.

standard easy-lock buckles enable fluent and fastadjustment

Size: S, M/L, XL Weight: (M/L) 2030 g (15 g) 71.61 oz. (0,5 oz)CE 1019 EN 358 EN 813 EN 361

PROFI WORKER speed

PROFI WORKER standard PROFI WORKER standard black

rope access

W0058 CRSEAMASTER IIFully adjustable harness for a rope access withpadded waist belt, leg loops and shoulder straps.Suitable for work positioning, fall arrest and workrestraint situation. This harness is specially intendedfor the workers at the off-shore oil platforms. padded waist belt, shoulders and leg loops narrowed padding and webbing on the shoulder-

straps in a neck area enhance a comfortable work back and front attachment points for fall-arrest


ment or work positioning according to EN 813 side attachment points for work positioning accord-

ing to EN 358 3 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg



the combination of standard and SPEED bucklesenable fluent and fast adjustment to fit to usersbody

flat rear attachment point does not bear on users

back when carrying backpack or breathing appara-tus

easy fixing of cam clean ascender in vertical posi-tion is provided by stitched strap between lowerfront attachment point and front tie-in point

Size: M/L, XLWeight: (M/L) 1700 g (15g) 60 oz.EN 358 EN 813 EN 361 CE 1019

8

Cleaning the windows, Krkonoe National Park Service Department. Czech Republic Photo: Jan Zmenk

9fall arrest harnesses

W0051BR CFRENERGETICFully adjustable full body harness specialy intendedfor the maximum comfort for work positioning andfall arrest. chest textile attachment point according to EN 361,

EN 813, with bearing capacity of 15kN. dorsal attachment point according to EN 361. Steel

D-ring with a bearing capacity of 15kN. 3 innovated SPEED buckles allow very easy putting

on. positioning twisted system according to EN 358. positioning D ring divide load to the waist belt and

to the bench. System allows rotation of the body inthe harness.

wide [18 cm] and solid waist belt. Combination ofthe foam and high density polyethylen.

4 braided gear loops with a bearing capacity 10 kg. rear plastic D rings with a bearing capacity 5kg. reinforcement of the bench is made from glass

fiber. ideal harness for all who have to spend in a harness

the hours or days.

Size: M/L, XLWeight: 3350 g (M/L) (15 g) 118,2 ozCE 1019 EN 813 EN 358 EN 361

W0063BB CFIRTECHNIC standardFully ajdustable work positioning and fall arrest har-ness with easy-lock buckles. an attachment point for work in hanging position,

rapelling according to EN 813 steel positioning points according to EN 358 are

placed symmetrically. Steel D-rings are flat and set-tled on a padding.

easy-lock buckles enable fluent and fast adjust-ment to fit to users body

2 braided gear loops with a bearing capacity of 10 kg slots designed for a secure hanging of expensive

equipment (such as power saw, drilling machine,..) identification and methodical label slide buckle intended for chest ascender fastening chest attachment point according to EN 361 dorsal attachment point according to EN 361

Size: S, M/L, XLWeight: (M/L) 1620 g (15 g) 57.14 oz. (0,5 oz)CE 1019 EN 358 EN 813 EN 361

W0064BB CFIRTECHNIC steel speedFully adjustable full body harness for work position-ing and fall arrest with the steel components andSPEED buckles. innovated steel SPEED buckles enable fluent and

fast adjustment to fit to users body the harness is made in an accordance with a strict

American standards (NFPA, ANSI) corrosion resistance of all steel components is tested

by spraying in a salt chamber for a period of 48 hours steel positioning points according to EN 358 are

placed symmetrically. Steel D-rings are flat and set-tled on a padding.

Size: S, M/L, XLWeight: (M/L) 2450 g (15 g) 86.42 oz. (0,5 oz)CE 1019 EN 358 EN 813 EN 361NFPA Class III ANSI Z359.1

W0048BR

EX-TENSupport of the waist belt to increase comfort at a backarea of worker in a height 7 mm thick padding. Foam with close pore does not

absorb a water high density polyethylene creates support of the

back and comfortable work lace webbing made from polyester with high abra-

sion resistance

Size: S, M/L, XLWeight: 340 g (M/L) 11.99 oz

10

rope park

W0050BR PTARZANFully adjustable full body harness intended for ropecourses and adventure parks attachment point for work in hanging position, rap-

pelling according to EN 813. anatomic waist belt and leg loops padding speed buckle connecting shoulder straps with waist

belt. Increased comfort when putting the harnesson.

buckle with a captive bar matches strict Americanstandards (ANSI, CSA). Its minimum strength is17.2 kN. No webbing slippage in a buckle. Its con-struction ensures longtime operation and efficiency(easy releasing and fastening even when dirty andtough webbing).Corrosion resistance is tested byspraying in a salty chamber for a period of 48hours.

Shoulder webbing has different colour for easymanipulation

Left leg loops with red colour inside helps to putthe harness on

Different colour of rear plate for each size. Dorsal attachment point according EN 361. Steel

D-ring with a bearing capacity of 15 kN. This D-ringis flat and settled on a padding.

Webbing strap stitched in the buckle simplify han-dling with buckle.

Size: XS - S, M - XLWeight: 1530 g (M - XL) 15 g 54 ozCE 1019 EN 813 EN 361

C5036BR00 PTARZAN lightFully adjustable full body harness intended for ropecourses and adventure parks front attachment point for belaying and rappeling

according to EN 12277 type C easy to put on anatomic waist belt and leg loops speed buckle enables to put on the harness easily buckle with a captive bar matches strict American

standards (ANSI, CSA). No webbing slippage in abuckle. Its construction ensures longtime operationand efficiency (easy releasing and fastening evenwhen dirty and toughwebbing).

Size: UNIWeight: 990 g 15 g 34,9 ozCE 1019 EN 12277

11

chest harnesses

W0200SYW0200BB - black version

RL CHESTFully adjustable chest harnessIt is certified in a combination with SIT WORKER asa full body fall-arrest harness according to EN 361.Use only in combination with a sit harness!

Size: UNIWeight: 600 g 21,2 oz

W0320SYW0320BB - black version FWPBODYFully adjustable fall-arrest harness with two attach-ment points in accordance with EN 361.Intended for working in places with the risk of fall.Harness is compact and light-weight, thus suitablefor horizontal or inclined planes. It allows temporaryhanging in. Size: S, M/L, XLWeight: 1050 g (M/L) 37 oz

CE 1019 EN 361

C1010BRC1010BB - black version

BOBINGOChest harness designed to be used together witha sit harness, optimising body position while hangingor falling.Do not use chest harness alone!

Size: UNIWeight: 240 g ( 15 g) 8,5 oz ( 0,5 oz)CE 1019 EN 12277

12

sit

W0067BRW0067BB - black version CIRSIT WORKER II speedFully adjustable sit harness with innovated SPEEDbuckles for work positioningThe new design of this sit harness is subsidized byperfect functionality, comfort and lightness.Intended for all vertical activities without any risk ofthe fall. Large gear loops and inovated SPEED buckles makefrom SIT WORKER ideal harness for every day users. side attachment points for work positioning accord-

ing to EN 358 front lower attachment point for descender place-

ment or work positioning according to EN 813 2 braided gear loops with a bearing capacity of 10 kg additional loops with a bearing capacity of 5 kg


wide padding provides a rich back support

Size: S, M/L, XLWeight: (M/L) 1450 g (15 g) 51.15 oz. (0,5 oz)CE 1019 EN 358 EN 813

W0065BRW0065BB - black version CIRSIT WORKER II standardFully adjustable sit harness with easy-lock bucklesfor work positioning. 2 braided gear loops with a bearing capacity of 10 kg wide padding provides a rich back support side attachment points for work positioning accord-

ing to EN 358 easy-lock buckles provides fast adjustment to fit

the users body

Size: S, M/L, XLWeight: 1130 g (15 g) 39.86 ozCE 1019 EN 358 EN 813

W0066BR CIRSIT WORKER II steel speedFully adjustable sit harness for work positioning withthe steel components and SPEED buckles innovated SPEED buckles enable fluent and fast

adjustment to fit to users body the harness is made in an accordance with a strict

American standards (NFPA, ANSI) corrosion resistance of all steel components is test-

ed by spraying in a salty chamber for a periond of48 hours

2 braided gear loops with a bearing capacity of 10 kg wide padding provides a rich back support side attachment points for work positioning accord-

ing to EN 358

Size: S, M/L, XLWeight: 1590 g (15 g) 56.09 ozCE 1019 EN 358 EN 813NFPA Class II ANSI Z359.1

SIT WORKER II speed

SIT WORKER II standard black

SIT WORKER II steel speed

13

sit harnesses

W0021BB ISTRIKEWorking sit harnessintended for special forces padded waist belt (detachable) and leg loops front attachment point (made of textile) for

descender placement 2 big gear loops the leg loops construction insure enough comfort in

bark area innovated SPEED buckles enable fluent and fast

adjustment to fit to users body freedom of movement

Size: S, M, L, XLWeight: 580g (M) 20,5 ozCE 1019 EN 813

W0022BRW0022BB - black version CIRURBAN IISit harness for work positioning anatomic waist belt and leg loops padding perfect-

ly fits to man anatomy textile attachment point for work in hanging posi-

tion, rappelling according to EN 813. textile positioning points according to EN 358 are

placed symmetrically, tested for 15 kN strength. 2 braided gear loops with a bearing capacity of 10

kg provide enough space for 10 pieces of HMScarabiners.

additional loops with a bearing capacity of 5 kgoffer additional space for the gear and better gearorientation.

slots designed for a secure hanging of expensiveequipment (such as power saw, drilling machine,..)

identification and methodical label. To prolong itslifetime is advised to hide this label under the web-bing.

Size: S, M/L, XLWeight: M/L 850 g (15g) 30 ozCE 1019 EN 358 EN 813

W0030BB

POLEBelt for work positioning one gear loop possibility of gear bag connection R&L buckles light-weight symmetrically positioned attachment points padded with good firm foam

Size: S, M/L, XLWeight: 450 g (M/L) 15,9 ozCE 1019 EN 358

14

arboriculture

W0061BR ATIMBER IIWork positioning harness presenting a perfectchoice for arborists

innovated anatomic waist belt and leg padding per-fectly fits man anatomy

removable and exchangable bridge connecting theleg loops

adjustable sliding D-ring enables you to take safe,comfortable and effective work position

wide and stiff padding offers great comfort whenhanging in the harness

side D-rings for work positioning EN 358 or gearattachment

4 gear loops with a bearing capacity of 10 kg pro-vide enough space for your gear.

additional loops with a bearing capacity of 5 kgoffer additional space for the gear and better gearorientation.

waist belt construction allows to attach First Aid Kitand plastic holders for industrial tools (PORTER).

Size: M/L, XLWeight: 1800g, 1950 g 63,5 oz, 68,8 ozCE 1019 EN 358 EN 813 W1040R - steel ring

W1041R - ALU ringW1042R - without ring

JINGLE IICambium saver intended for use in tree climbing asanchor device and belay anchor. The different size ofthe rings enables easy and quick installing andremoving of the sling from the ground. As well suit-able in industry as an anchor device. length of the slings with "O" ring - 100, 120,

150 cm strength 25 kN inside and outside diameter of "O" rings:

big 46/70 mm, small 28/52 mm 3 layers of webbing sewn together red colour of webbing for better visibility available with aluminium "O" rings or without

"O" rings.

CE 1019 EN 795B

W9500Y

TREEMOUSEArboristic throwing bag for tree climbing situable for installation of the anchor point in a

treetop using cambium saver (JINGLE) used for dropping small branches down from the

tree top situable for installation of the working rope to the

places with comlicated accessmaterial: high endurance synthetic fabric PESsteel welded ring of 3 cm in diameterpolyamid webbing

colour: yellow, red, orange

TREEMOUSE 300300 g/yellowcode: W9500Y300

TREEMOUSE 350350 g/redcode: W9500Y350

TREEMOUSE 400400 g/orangecode: W9500Y400

W0070RR00

TIMBER BRIDGEReplacement connecting loop Material: polyamide Width: 20 mmLength: 32.5 cmWeight: 37 g

15

rescue & accessories harnesses

W0010YBW0010BB - black version

FRANKLINWork positioning seat provides more comfort whenhanging in the harness. It is intended for use withour fall arrest or work positioning harnesses. It iseasy to adjust with Rock&lock buckles. Wide sittingarea ensures good stability and allows comfortablehanging as well as standing work position.Suspension straps do not press on your thighs.Three D-rings (bearing capacity 50 kg) for vessel orother gear suspension.Max. load of seat: 250 kg

Weight: 1650 g 58.2 oz.

W0005YBO9W0005BB09 - black version IRLAIKADog harness intended for transport of the dog froma helicopter side light-alloy reinforcements easy and quick fastening with velcro max. load 150 kgSize: UNI

W8200BY REVACUATIONTRIANGLE SITEvacuation triangle for a person to rescue from a chairlift or a cable car. chest plastic buckle for easy putting on the triangle durable steel attachment points easy to put on and take offOnly for rescue purposes.

Size: UNIEN 1498, CE 1019

W8210BY REVACUATION TRIANGLECOMBIEvacuation triangle with shoulder straps for a personto rescue from a chair lift or a cable car special shoulder straps for better fixing a person in

evacuation triangle straps are made from different color for better

attachment management durable steel attachment points easy to put on and

take offOnly for rescue purposes.

Size: UNICE 1019 EN 1497 EN 1498

16

harnesses

type of buckles black version code size weight M/L waist leg loops height [g] [cm/in] [cm/in] [cm]

EXPERT II standard yes W0044BR02 S 55-80 / 22-31 45-60 / 18-24 150-170yes W0044BR03 M/L 2130 75-100 / 29-39 50-75 / 19-29 160-180yes W0044BR05 XL 85-130 / 33-51 50-75 / 19-29 175-205

speed yes W0045BR02 S 55-80 / 22-31 45-60 / 18-24 150-170yes W0045BR03 M/L 2430 75-100 / 29-39 50-75 / 19-29 160-180yes W0045BR05 XL 85-130 / 33-51 50-75 / 19-29 175-205

steel speed no W0070BR02 S 55-80 / 22-31 45-60 / 18-24 150-170no W0070BR03 M/L 2730 75-100 / 29-39 50-75 / 19-29 160-180no W0070BR05 XL 85-130 / 33-51 50-75 / 19-29 175-205

PROFI WORKER standard yes W0041BR02 S 55-80 / 22-31 45-60 / 18-24 150-170yes W0041BR03 M/L 1720 75-100 / 29-39 50-75 / 19-29 160-180yes W0041BR05 XL 85-130 / 33-51 50-75 / 19-29 175-205

speed yes W0042BR02 S 55-80 / 22-31 45-60 / 18-24 150-170yes W0042BR03 M/L 2030 75-100 / 29-39 50-75 / 19-29 160-180yes W0042BR05 XL 85-130 / 33-51 50-75 / 19-29 175-205

SEAMASTER II mix no W0058BR03 M/L 1700 75-100 / 29-39 50-75 / 19-29 160-180no W0058BR05 XL 85-130 / 33-51 50-75 / 19-29 175-205

ENERGETIC mix no W0051BR03 M/L 3350 80-110/31-43 50-75/20-29 160-180 no W0051BR05 XL 100-130/39-51 50-75/20-29 175-205

TECHNIC standard yes W0063BB02 S 55-80/22-31 45-60/18-24 150-170W0063BB03 M/L 1620 75-100/29-39 50-75/20-29 160-180W0063BB05 XL 85-130/33-51 50-75/20-29 175-205

speed steel yes W0064BB02 S 55-80/22-31 45-60/18-24 150-170W0064BB03 M/L 2450 75-100/29-39 50-75/20-29 160-180W0064BB05 XL 85-130/33-51 50-75/20-29 175-205

TARZAN mix no W0050BR01 XS-S 50-80 / 20-31 45-60 / 18-24 145-165no W0050BR02 M-XL 1530 70-130 / 27-51 50-75 / 19-29 160-205

17

harnesses

type of buckles black version code size weight M/L waist leg loops height [g] [cm/in] [cm/in] [cm]

TARZAN LIGHT standard no C5036BR UNI 990 60-130/24-51 35-70/14-27 150-200

BODY mix yes W0320BR02 S 150-170yes W0320BR03 M/L 1050 160-180yes W0320BR05 XL 175-205

BOBINGO double buckle yes C101 UNI 240

RL CHEST RL buckle yes W0200SY UNI chest max. 125/49

SIT WORKER II standard yes W0065BR02 S 55-80 / 22-31 45-60 / 18-24yes W0065BR03 M/L 1130 75-100 / 29-39 50-75 / 19-29yes W0065BR05 XL 85-130 / 33-51 50-75 / 19-29

speed yes W0067BR02 S 55-80 / 22-31 45-60 / 18-24yes W0067BR03 M/L 1450 75-100 / 29-39 50-75 / 19-29yes W0067BR05 XL 85-130 / 33-51 50-75 / 19-29

steel speed no W0066BR02 S 55-80 / 22-31 45-60 / 18-24no W0066BR03 M/L 1590 75-100 / 29-39 50-75 / 19-29no W0066BR05 XL 85-130 / 33-51 50-75 / 19-29

URBAN II standard yes W0022BR02 S 55-80 / 22-31 45-60 / 18-24yes W0022BR03 M/L 850 75-100 / 29-39 50-75 / 19-29yes W0022BR05 XL 85-130 / 33-51 50-75 / 19-29

STRIKE speed yes W0021BB02 S 60-80 /24-31 50-55 / 20-22yes W0021BB03 M 580 70-90 / 28-35 55-60 / 22-24yes W0021BB04 L 80-100 / 31-39 60-65 / 24-26yes W0021BB05 XL 90-110 / 35-39 65-70 / 26-28

POLE RL buckle yes W0030BR02 S 55-80 / 22-31yes W0030BR03 M/L 450 75-100 / 29-39yes W0030BR05 XL 85-130 / 33-51

TIMBER II mix no W0061BR03 M/L 1800 70-100 / 28-39 50-65 / 20-25no W0061BR05 XL 85-130 / 33-51 55-75 / 22-29

ropes

Route 44experience the touch of the futureRoute 44 is a unique technologyinvented and patented by SingingRock. It opens new horizons for thebraiding of climbing and static ropes.Route 44 technology allows blendingof rope features that were previouslyconsidered impossible. Using theRoute 44 technology, rope braiding ismore compact, softer and above all,creates more durable than conven-tional rope. These combined featuresgive you a better rope than others.

ThermotransferThermotransfer of the label on allSinging Rock ropes. Thermo-transferis a special plastic label applied to therope sheath by using heat and pres-sure. This label is durable, does not peel offand the rope ends are not widerwhich can cause the rope end getcaught up (for example in rappel sta-tions, etc).

Ultrasonican excellent system for rope endsOur own special technology has beenused for the ends of the rope. All SINGING ROCK rope ends are donewith a unique technology calledULTRASONIC, which means that theload-bearing core and the protectivesheath are joined into a compact uniton the last 15 mm of the rope

Excellent static ropes of different diameters areintended for rescuing the injured, manipulation withobjects and rope access methods for work at aheight.They meet the most exacting requirements, especial-ly the best quality, that the rescuers, firemen, spe-cialists in working at a height and otherprofessionals require when working every day.SINGING ROCK dynamic ropes are the only ones inthe world manufactured with a licence for theDuPont TEFLON fabric protector. The ropes pro-tected with a layer of TEFLON are distinguished bytheir resistance to water and abrasion. TEFLON alsoeffectively prevents the penetration of dust particlesinto the structure of the ropes and thus increasestheir service life and your safety!Why do you need resistance to water and abrasion?Maximum water and abrasion resistance are amongthe most important requirements when choosing thecorrect rope. Each dynamic rope is exposed to theaffects of moisture and abrasion during its use both of these factors have a huge influence on theclimbers safety.



workingactivities

4 18 26 32 36 52 62

19

static ropes

STATIC 10.5L0230WRwhiteL0230RRredL0230BBblackL0230KKkhaki

CE 1019 EN 1891UIAA

STATIC 11.0L0250WRwhiteL0250RRredL0250BBblack

CE 1019 EN 1891UIAA NFPA

STATICR44 10.5L0430WRwhiteL0430RRredL0430BBblackL0430KKkhaki


STATICR44 11.0L0450WGwhiteL0450RRredL0450BBblackL0450OOorange


STATIC 9.0L0220WRwhiteL0220BBblack

CE 1019 EN 1891UIAA

L026

CONTRA 10.5static ropeExcellent static rope s intended for rescuing theinjured, manipulation with objects and rope accessmethods for work at a height.It meets requirements that the rescuers, firemen,specialists in working at a height and other profes-sionals require when working every day. Ultrasonic ending Thermotransfer end markingpack 50, 60, 70 m, coil 100, 200 m,or the lenght on customers request

CE 1019 EN 1891 UIAA

20

dynamic

L036

SCORE 10.1 Single mountaineering rope produced on a 44-

carrier machine (Singing Rock's patented technology). Top quality product with balanced parameters. Rope is durable and comfortable.

Thermotransfer labeling Middle marking Ultrasonic ending

CE 1019 EN 892 UIAA

L0384

ICON 9.3 Dry extremely light and robust; it is ideal for hard

routes onsight, flash or redpointing were everygram counts.

with our special TEFLON treatment Icon 9.3 isideal for rock climbing, pumpy routes and extremeascents in the mountains. We have used the latesttechnologies and knowledge of our Research &Development department.

Teflon is applied on the ropes by revolutionarynanotechnology. SBS gives the rope better proper-ties. Every streak of the sheath is guided individu-ally, not in a pair as usual. The sheath is moreresistant against breakage, but on the other handit is smoother.

Treatment TEFLON


CE 1019 EN 892 UIAA

L038

ICON 9.3 Thermotransfer labeling Middle marking Ultrasonic ending

CE 1019 EN 892 UIAA

L0324

GLORY 9.8 Dry Single mountaineering rope produced on a 44-

carrier machine (Singing Rock's patented technolo-gy). This unique technology gives the rope greathandling characteristics, compactness, low-weightand durability. Easy to knot and untie, as well.

All technical parameters are in balance with eachother, giving Glory 9.8 mm great handling charac-teristics.

The rope is compact, which allows for minimalinter-fiber fiction, and results in a round crosssec-tion.

The rope is durable and comfortable

Thermotransfer labeling Middle marking Ultrasonic ending TEFLON treatment

CE 1019 EN 892 UIAA

L032

GLORY 9.8 Thermotransfer labeling Middle marking Ultrasonic ending

CE 1019 EN 892 UIAA

www.singingrock.com

21

dynamic ropes

L034

DURAN 10.4 Made with Singing Rocks patented R44 technology,

the rope has a well balanced weight and diame-ter.

All parameters are in balance with each other.Therefore, its very compact, durable and comfort-able. Impact force and number of falls are standard. the main feature of this rope is its thicker sheathwhich is highly abrasion resistant.

The rope has good handling characteristics and issuitable for use with most belaying devices.

Ideal for areas with rough rocks, as well as forindoor climbing


CE 1019 EN 892 UIAA

L051

ACCORD 8.3 compact rope which has minimal interfiber friction,

thereby increasing durability. tested and certified according to the EN 892 stan-

dard requirements for half ropes and twin ropes.

weight, diameter and number of falls are balancedin such a way that Accord 8.2 can be used as botha half and twin rope.

used in pairs, the climber can choose between thetwin rope technique or half rope technique.Whatever technique is required at the time.

Thermotransfer labeling Ultrasonic ending

CE 1019 EN 892 UIAA

L302

GEMINI 7.9 tested and certified according to EN 892 standard

requirements for half ropes and twin ropes. lightweight and all parameters are in balance with

each other, allowing many types of use: Ice climb-ing and mixed routes, glaciers and mountaineering.

TEFLON is applied on the ropes by revolutionarynanotechnology.

quality without compromise. TEFLON treatment Thermotransfer labeling Ultrasonic ending

CE 1019 EN 892 UIAA

Teflonpermanent drySelected SINGING ROCK ropes are pro-duced with a DuPontTM TEFLON fab-ric protector license. Ropes protectedby a TEFLON layer have extraordinarywater and abrasion resistance.The TEFLON layer also effectively pre-vents the intrusion of dust particlesinto the rope structure, therebyincreasing its lifespan.

Special TeflonThe rope is protected with a very sta-ble organic resin based on organicfluoridated polymers. The resultingprotective film reduces the surfaceenergy of the textile material

so much that it not only repels water,but fatty substances as well. It alsoprevents the penetration of dust parti-cles into the internal structure of therope, protecting the inside of the ropefrom damage. The TEFLON layer gives our ropessuperior properties for use, especiallyin damp or abrasive environmentswhere ordinary ropes are vulnerable toserious damage. So, dynamic ropeswith Ein, zwei, dry finishing have high-er safety and longer life than everbefore.

Middle markingMid-length of the rope is visibly marked bya dark color band, which does notaffect the core structure and its sheath.

22

special

MILITARY:This collection of static ropes has been specially prepared for the use of police and army strike forces and otherspecial units. If you require the best quality and a special design, MILITARY ropes are the best choice.

STATICR44 10.5L0430BBblackL0430KKkhakiCE 1019 EN 1891 NFPA UIAA

STATICR44 11.0L0450BBblackCE 1019 EN 1891 NFPA UIAA

STATIC 11.0L0250BBblackCE 1019 EN 1891 NFPA UIAA

STATIC 10.5L0230BBblackL0230KKkhakiCE 1019 EN 1891 UIAA

W2500 - 2 eyesW2520 - 1 eye

STITCHED EYEstrength 30 kNknot breaking force 18 kNstrength with the knots 15 kN/3 min.elongation 3,2 %max. impact force 6 kNsheath slippage 0 mmshrinkage 3 %diameter 11 mmmaterial PAnumber of falls 50

weight: 79 g/mlenghts on customer's requestcolors: black, white

EN 1891 CE 1019

23

speleo & accessory ropes

L0440WR

SPELEO R44 10.5L0240WR

SPELEO 10.5CE 1019 EN 1891 UIAA

W2608W2610

TIMBER ACCESSORY CORDwith sewn eyes rope diameter 8 and 10 mm the use of the PES/TECHNORA materialcombination results in a better thermaland mechanical resistance of the sheath.Length:diameter 8 mm - 75, 80, 85, 100 cmdiameter 10 mm - 80, 85, 90, 100 cm

CE 1019 EN 795B

L0041 - L0081

ACCESSORY CORDSuitable for a multitude of uses, SINGING ROCKaccessory cords are strong and supple. easy handling strong multitude of usesDiameters: 4, 5, 6, 7 and 8 mm

CE 1019 EN 564 UIAA

24

rope accessories

W001800

PANCAKEDesigned to improve hauling systems and to makean ascent along the rope easier.Part of tackle systems: prevents from getting prusik knot into the pulley ideal for hauling in bigwalls and during rescue

actionsAscending along a fixed rope: prusik knot moves upwards without hand interven-

tion

ATTENTION: Pancake itself doesnt ensure safetyof prusik knot. Strength of prusik knot depends onparameters of both cord and rope!

Size: UNIWeight: 15 g 0,53 oz.

C0001BB

ROPE BAGWith removable sheet. sheet dimensions 137 x 137 cm hidden pocket for keys and money. well-padde shoulder straps abrasion resistant material

Weight: 620 g

W1001BB

URNALeg rope bag for rappeling in the extreme conditions to have the

rope under the control can be also used as a tool bag when working at

the heights easy to put on the users leg and the harnesses

with the plastic buckle made from high quality material max. length of the rope 50 m of the diameter 11,5 mm inside loop to tie the end of the rope easy closing system allows to feed the rope slowly the bag can be completely closed to avoid loosing

the tools side pocket for small items or for the notebook

Color: blackWeight: 240 g ( 15 g) 8.5 oz ( 0.5 oz)Capacity: 11 litres

W8100B

ROPE PROTECTORProtects rope sheath against abrasion on rough.50/70/100/120 cm 20/28/40/48 inMaterial: PVCColour: mix colours

W1027B

DEFENDERProtects rope sheath against abrasionon rough surfaces and edges.Allows to put 2 ropes in.80/120 cm 32/48 inMaterial: Cortex

E0015XX

ROPEMARKERWhen you need to mark your rope, use SINGINGROCK Rope Marker with dark ink and easy-to-use design, you'll never

be left wondering in those unsure situations when the middle marking fades you can mark it

again with this specially formulated rope marker you can mark the center of ropes or any other part

of the harness or sling.For use with: PA, PP, PES, PE.

X0004GB

THERMOCUTTERIdeal machine for cutting the ropes and accessorycords. Compact hand-held. The blade heats quickly.For save and fast cutting the ropes.

25

ropes

Some notes:Type A rope - low stretch kernmantel rope designed for general useby persons in rope access including all kinds of work positioning andrestraint; in rescue and in cavingType B rope - low stretch kernmantel rope of a lower performancethan type A ropes, requiring greater care in use (standard does notcontent other specification)

Static strength defined in the standard:22 kN for the ropes of type A18 kN for the ropes of type BAnother standard requirement says, the material used for rope produc-tion shall have the melting point higher than 195C, so polyethyleneor polypropylene are not suitable for the production of the ropes.

Rope elongationThe rope elongation shall not be higher than 5%, tested by loadingthe rope for 3 min with 150kg load (pretension 50 kg)

Dynamic performanceFall test with two meters long rope terminated with figure-eightknots; fall factor 1.The testing mass 100 kg for type A ropes, 80 kg for type B ropes.

accessory cordscode diameter weight strenght length

mm g/m kN m ft

L0041 4 11,8 5 100 328

L0051 5 17,1 6 100 328

L0061 6 22,0 8 100 328

L0071 7 33,7 12 100 328

L0081 8 45,2 15 100 328

CE 1019 EN 564 UIAA

static ropescode strenght knot breaking force static elongation number of falls weight type

kN kN % g/m

Static R44 10.5 L0430 35,8 22,3 3,4 >15 72 A

Static R44 11.0 L0450 34,7 20,3 3,2 >20 77 A

Static 9.0 L0220 25,5 14,5 3,5 >8 52 B

Static 10.5 L0230 30,6 19,3 3,3 >10 69 A

Static 11.0 L0250 37,8 24 3,3 >20 80 A

Stitched eye W25 30 18 3,2 >20 79 A

CE EN 1891 UIAA packaging static ropes: pack - 30, 40, 50, 60, 70, 80, 100 m coil - 100, 200 m

speleo ropesstrenght knot breaking force static elongation number of falls weight

kN kN % g/m

speleo R44 10,5 35,6 22,1 3,4 >15 72

speleo 10,5 29,2 18 3,3 >10 69

CE EN 1891 UIAA packaging speleo ropes: pack - 30, 40, 50, 60, 70, 80, 100 m coil - 100, 200 m

code colour length* diameter weight static elong. dynamic elong. falls impact force type

m mm g/m kN

Icon dry L0384RX red 30 80 9,3 57 9,0% 33,9% 5 8,4 single

Icon L0380RX red 30 80 9,3 57 9,0% 33,9% 5 8,4 single

Glory dry L0324BY yellow 30 80, 100, 200 9,8 62 7,9% 36,3% 6 8,9 single

Glory L0320YB yellow 30 80, 100, 200 9,8 62 7,9% 36,3% 6 8,9 single

Score L0360GG green 30 60, 80, 100, 200 10,1 66 7,0% 31,9% 8 9,1 single

Rave L0330RS red 30 70, 100, 200 10,3 66 7,7% 32% 7 9,3 single

Duran L0340AX blue 30 60, 80, 100, 200 10,4 70 6,00% 31,3% 10 8,7 single

Accord L0510 blue 30 70, 100, 200 8,3 43 9% / 6,4% 32% / 34% 1.5.2015 5,9 / 9,7 half / twin

L0510 yellow 30 70, 100, 200 8,3 43 9% / 6,4% 32% / 34% 1.5.2015 5,9 / 9,7 half / twin

Gemini L3020 red 30 70, 100, 200 7,9 39 8% /7,3% 33% / 29% 1.5.2016 5,7/8,3 half / twin

L3020 yellow 30 70, 100, 200 7,9 39 8% /7,3% 33% / 29% 1.5.2016 5,7/8,3 half / twin

CE EN 892 UIAA packaging dynamic ropes: pack - 30, 40, 50, 60, 70, 80, 100 m coil - 200 m

dynamic ropes

connectors

Key-lockfor easy manipulationKey lock is an extremely simple andingenious locking system that solves theproblems associated with the traditionaldesign of carabiners. It eliminates anyrisk of ropes or slings becoming entan-gled in the gate or in the carabiner nosewhen it is being connected or released.Neither the gate, which is completelycylindrical, nor the nose has any sharpedges. Ropes and slings do not, there-fore, come into the contact with any cut-ting edges.

Hot forgingThe latest technology in manufactu-ring carabiners is when the aluminumalloy is heated to reach a plasticizedstate when being forged into the finalshape. This allows the metal to beformed more easily so it can be movedto areas where it is needed andremoved from the areas where it is notneeded. In comparison with cold forged binners,the hot forged binners are lighter, moredurable and stronger.

Uniqueproductionnumberidentification of metal partsFor better traceability and inspectionrecording the Singing Rock metal partsare marked with the unique productionnumber.Singing Rock metal parts marked withthe unique production number are in thiscatalogue indicated with text "uniqueproduction number".



workingactivities

4 18 26 32 36 52 62

27

steel connectors

K4241ZO07OVAL STEEL CONNECTOR/triplelockwith key lock and triplelock gate

30 kN 9 kN 8 kNgate opening (d) 18 mm 195 g 6,9 oz.unique production numberCE 1019, EN 362

K4081ZOD STEEL CONNECTOR/triplelock with triplelock gate, key lock, zinc plated

50 kN 13 kN 20 kNgate opening (d) 25 mm 267 g 9 oz.unique production numberCE 1019 EN 362

K4080ZOD STEEL CONNECTOR/screwwith screw gate, key lock, zinc plated

50 kN 13 kN 20 kNgate opening (d) 25 mm 255 g 9 oz.unique production numberCE 1019 EN 362

K4241ZO05OVAL STEEL CONNECTOR/screwwith screw gate, key lock, zinc-plated

30 kN 9 kN 8 kNgate opening (d) 18 mm176 g 6,21 ozunique production numberCE 1019 EN 362

STEEL CONNECTORS designed for industrial use oval connector is ideal for pulleys, tackles, ascenders or descenders key lock nose (except rotating hangers) unique production number zinc plated surface individually tested up to 10 kN (D steel connectors up to 15 kN)Material: steel

K82006ZK82006B - black matt MAILLONMINI OVALD 6 mm 4 kNgate opening 7,5 mmzinc-plated 33 g

K82008ZK82008B - black mattMAILLONSMALL OVALD 8 mm 35 kNgate opening 11 mmzinc-plated 77 gCE 0082 EN 12275 EN 362

K82207ZK82207B - black mattMAILLONSMALL DELTAD 7 mm 4 kNgate opening 11 mmzinc-plated 60 g

K82210ZK82210B - black mattMAILLONBIG DELTAD 10 mm 45 kNgate opening 12 mmzinc-plated 151 gCE 0082 EN 12275 EN 362

K82310ZK82310B - black mattMAILLONBIG DD 10 mm 45 kNgate opening 12 mmzinc-plated 144 gCE 0082 EN 12275 EN 362

steel maillons

WIRE ANCHORgate opening:K70908PO (d) 80K70910PO (d) 100K70914PO (d) 140Ideal for constructions or towers where the largegate opening is necessary.Stainless steel 350 g (K70910PO)CE 0333 EN 362

28

light alloy

K0015EE00 LARGO/triple lockLight alloy connector with triple lock gateand HMS shape. Class B large opening key-lock shape suitable for HMS belayingunique production number

22 kN 8 kN 8 kNgate opening (d) 30.5 mm104 g 3.67 oz.CE 1019 EN 362

K0014EE00LARGO/screwLight alloy connector with screw gateand HMS shape. Class B large opening screw gate key-lock shape suitable for HMS belayingunique production number

22 kN 8 kN 8 kNgate opening (d) 30.5 mm100 g 3.53 oz.CE 1019 EN 362

K0010BB00EXTASY/bentRobust, universal carabiner with bent gatefor easy rope clipping. key lock, anodized

25 kN 8 kN 10 kNgate opening (d) 20 mm 47 g 1,65 oz.CE 1019 EN 12275 UIAA

K0016AA00K0016BB00 - black mattOZONE/screwOval carabiner, key lock, screw gate

26 kN 10 kN 7 kNgate opening (d): 21 mm80 g (2,82 oz.)CE 1019 EN 362 EN 12275

K0018AA00K0018BB00 - black mattOZONE/triple lockOval carabiner, key lock, triple lock

26 kN 9 kN 7 kNgate opening (d): 21 mm85 g (3 oz.)CE 1019 EN 362 EN 12275

K0017AA00K0017BB00 - black mattOZONE/TWLOval carabiner, key lock, twist lock

26 kN 9 kN 7 kNgate opening (d): 21 mm85 g (3 oz.)CE 1019 EN 362 EN 12275

K5070PPD BIG CONNECTORSCREW GATEpolished

30 kN 8 kN 9 kNgate opening (d) 26 mm 88 gunique production numberCE 0639 EN 362 EN 12275

Ozone carabinersOzone has been designed to be used with pulleys, ascenders and descenders:its almost oval shape makes the carabiner easy to turn around in slings or belaystation as well..

K0011BB00 EXTASY/straightRobust, universal carabiner with key lock for easyclipping on gear loops and effortless handling. key lock, anodized

25 kN 8 kN 10 kNgate opening (d) 20 mm 47 g 1,65 oz.CE 1019 EN 12275 UIAA

29

light alloy connectors

K0007EE00K0007BB00 - black mattHYPNOS/screwLight and compact HMS carabiner for belayingmnter hitch or with tube. For better gearmanagement the gates are in different colors.With screw gate, key lock, anodized

22 kN 7 kN 7 kNgate opening (d) 21,5 mm 71 g 2,49 oz.unique production numberCE 1019 EN 12275 EN 362 UIAA

K0008EE00K0008BB00 - black mattHYPNOS/TWLLight and compact HMS carabiner for belayingmnter hitch or with tube. For better gearmanagement are gates in different colors.With twist lock, key lock, anodized

22 kN 7 kN 7 kNgate opening (d) 21,5 mm 75 g 2,63 oz.unique production numberCE 1019 EN 12275 EN 362 UIAA

K0019EE00K0019BB00 - black mattHYPNOS/triple lockLight and compact HMS carabiner for belayingby mnter hitch or with other devices. with triple lock, key lock, anodized

22 kN 7 kN 7 kNgate opening (d) 21,5 mm 75 g 2,63 oz.CE 1019 EN 12275 EN 362 UIAA

K0012EE00K0012BB00 - black mattEXTASY/screwOur smallest screw carabiner for all vertical activites.For better gear management the gates arein different colors.With screw gate, key lock, anodized

25 kN 8 kN 10 kNgate opening (d) 17 mm 52 g 1,82 oz.unique production numberCE 1019 EN 12275 EN 362 UIAA

30

light alloy

accessory carabiners

K5052EE00

MINI PEARmix colour 16 g gate opening (d) 11 mmnot for climbing

K5182EE00

MINI Dmix colour 25 ggate opening (d) 14 mmnot for climbing

K9000BB03

PORTERPlastic holder for racking ice screws, pitons andindustrial tools. for racking ice screws, pitons and industrial tools

on the harness easy clipping and un-clipping the nose on the upper part allows to set away

some staff in order to access staff on the bottom. rubber part fixes the Porter on place and prevent

it from rotationWARNING: NOT FOR CLIMBING!The Porter is NOT load-bearing! It is not designed tohold humans weight.Do not use it for protection or belaying.Max. load: 5 kgWeight: 32 g

K3536201

BIG CONNECTORwith double triggerautomatic lockinggate opening 60 mm 25 kNpolished, Al 450 gunique production numberCE 0333 EN 362

K3702PPK3690ZO steel version

SMALL CONNECTORwith double triggerautomatic lockinggate opening 21 mm 25 kNpolished, Al 150 gunique production numberCE 0333 EN 362

K3550PP

CONNECTOR GIGAwith double triggerautomatic lockinggate opening 110 mm 25 kNpolished, Al 965 gunique production numberCE 0333 EN 362

K4280PP

D BAR CARABINER /screw gatewith screw gateand captive bar, polished


K4290PP

D BAR CARABINER /twist lockwith twist lockand captive bar, polished


31

connectors

code colour / surface material EN12275 EN362 gate open. weightsport work kN kN kN mm g oz

Hypnos / screw K0007EE00 titanium alloy 22 7 7 21,5 71 2,49

K0007BB00 black alloy 22 7 7 21,5 71 2,49

Hypnos / TWL K0008EE00 titanium alloy 22 7 7 21,5 75 2,63

K0008BB00 black alloy 22 7 7 21,5 75 2,63

Hypnos / triple lock K0019EE00 titanium alloy 22 7 7 21,5 75 2,63

k0019BB00 black alloy 22 7 7 21,5 75 2,63

Extasy / bent K0010EE00 yellow alloy 25 8 10 20 47 1,65

K0010BB00 black alloy 25 8 10 20 47 1,65

Extasy / straight K0011EE00 titanium alloy 25 8 10 20 47 1,65

K0011BB00 black alloy 25 8 10 20 47 1,65

Extasy / screw K0012EE00 titanium alloy 25 8 10 17 52 1,82

K0012BB00 black alloy 25 8 10 17 52 1,82

D steel / screw K4080ZO zinc-plated steel 50 13 20 25 255 8,93

D steel / triple lock K4081ZO zinc-plated steel 50 13 20 25 267 9,35

Oval steel / screw K4241ZO zinc-plated steel 30 9 8 18 176 6,21

Oval steel / triple lock K4241ZO07 zinc-plated steel 30 9 8 18 195 6,9

D big / screw gate K5070PP silver alloy 30 8 9 26 88 3,1

D bar / screw gate K4280PP silver alloy 30 9 11 19 76 2,68

D Bar / TWL K4290PP silver alloy 30 9 11 19 81 2,85

Ozone / screw K0016AA00 blue alloy 26 10 7 21 80 2,82

K0016BB00 black alloy 26 10 7 21 80 2,82

Ozone / TWL K0017AA00 blue alloy 26 9 7 21 85 3

K0017BB00 black alloy 26 9 7 21 85 3

Ozone / triple lock K0018AA00 blue alloy 26 9 7 21 85 3

K0018BB00 black alloy 26 9 7 21 85 3

Largo / screw K0015EE00 titanium alloy 22 8 8 30,5 100 3,53

Largo / triple lock K4290PP titanium alloy 22 8 8 30,5 104 3,67

Small connector K3702PP silver alloy 25 21 150 5,29

K3690ZO zinc-plated steel 25 244 244 8,6

Big connector K3536201 silver alloy 25 60 450 15,87

Giga connector K3550PP silver alloy 25 110 965 34,04

The gear for an arborist Photo: Luk Neklan

helmets



workingactivities

4 18 26 32 36 52 62

33

work helmets

W9600

KAPPA WORK lightweight and durable working helmet with inno-

vative design. fully adjustable, fast and secure adjustment system well ventilated with 8 air intakes, intakes are pro-

tected by an polyamid anti intrusion grille adjustable chinstrap and headband for a comfort-

able fit quick fastening and opening with a safety release

system according to EN 397 rear size adjustment system is flexible and can be

easily puted inside the helmet four head lamp holders compatible with any head-

lamp on the market inner padding and headband fully removable and

washable. compatible with all Peltor ear defenders with P3A

screw attachment.(note: Peltor ear defenders are not available at ourstock)

Size: UNI 53-62 cmWeight: 330 gColor: red, yellowMaterial: ABS injection moulded outer shell

EPS energy absorption inner structure

polyamid strap

CE EN 397

34

sport

C0049

TERRA IILight helmet for all climbing activities universal size fully adjustable lightweight well ventilated four head lamp holders compatible with any

headlamp from the market

Weight: 270 g / 9.52 ozSize: 51 60 cmMaterial: shell: polycarbonate, foam: polystyrene

Color options:C0049GW00 TERRA II greenC00490W00 TERRA II orangeC0049SW00 TERRA II greyC0049BB00 TERRA II black matt

CE EN 12492

Lucie Hrozov, Singing Rock Climbing Team Photo: Libor Hroza

35

work helmets

X0033

PLASMA WORKWork helmet Helmet with an innovative design, light, compact,

comfortable and well ventilated thanks to 10 airintakes that keep the head cool at all times.

Provided with a fast, simple and effective sizeadjustment mechanism consisting of a wheel with arubber grip on the back of the helmet.

Provided with external lamp clips made of strongnylon, compatible with all helmet lamps availableon the market.

Soft polyethylene headband, fixed to the externalshell without rivets.

Inner padding consisting of two separate pieces,headband and disc, fully removable and hand ormachine washable at 30C. Non-allergic, cool, mois-ture wicking and odour resistant fabric.

Chinstrap with four fastening points at the back fora better fit. Fixed to the shell without rivets. Quickfastening and opening with a safety release systemin compliance with EN 397. Provided with two softpolyethylene side retractors to regulate the lengthof the straps.

Provided with a ring to hook the helmet onto a har-ness.

May be fitted with the Kask visor VISIERA PlasmaWork. Code: X0035

Compatible with all Peltor ear defenders with P3Ascrew attachment.(note: Peltor ear defenders are not available at ourstock

TECHNICAL DETAILS:External shell: P.P. PolypropyleneInternal shell: HD Polystyrene density 50 gr/l.Headband: PE Polyethylene.Lamp holder system: External nylon 6.6. luminescentclipsSize: Universal - adjustable from size 51 to 62.Weight: 380 gr.Colours available for AQ series: White, red, blue, yellow.X0033AA0 HELMET PLASMA WORK AQ blueX0033RR00 HELMET PLASMA WORK AQ redX0033WW00 HELMET PLASMA WORK AQ whiteX0033YY00 HELMET PLASMA WORK AQ yellow

CE EN 397

anchor devices, slings and lanyards

Uniqueproductionnumbertextile productsFor better traceability and inspectionrecording the Singing Rock slings andlanyard are marked with the unique pro-duction number.

Seam coverThe cover is made of high-durabletransparent elastomer. It protectsstrength seam on the rope and allowsits control and revision.



workingactivities

4 18 26 32 36 52 62

37

anchor devices

K6370BB

RIGGING PLATE 1/3Helps to organize carabiners at the anchor point.Efficient force distribution at different load direc-tions.Rounded holes (thickness 10 mm) allow to attachthe ropes directly to rigging plate (at any hole).Thickness 5 mm

36 kN thickness 5 mm light alloy black matt69 g (2.45 oz.)CE 0333

K6371BB

RIGGING PLATE 3/5Helps to organize carabiners at the anchor pointEfficient force distribution at different load direc-tions.

45 kN thickness 7 mm light alloy black mattCE 0333

K702X10 - 10 mmK702X12 - 12 mm

HANGER PLATEStainless steel hanger plate for permanent anchorpoint loop for two carabiners stainless steel plate with 3mm thickness

Weight: 45 g (1.60 oz.)Strength: 25 kNEN 959 EN 795

K00300600

TWISTERInnovated rotating anchorPlaced between a load and either rope or cable, thetwister avoids severe rope twisting while the loadturns.

Working load: 4 kNColor: anthracite/yellowStrength: 22 kNWeight: 91 g /3,25 oz.CE 0321 EN 354

K703010

GLUE IN ANCHORStainless steel permanent anchor point. The pointedend allows the distribution of the glue in the hole(12 mm diameter) thus guaranteeing a solid anchorpoint. Easy to insert.Length of shaft: 80 mm.

Weight: 120 g (3.18 oz.)EN 959 EN 795

A0002SS00

D - MOBILEDoor or window anchor pointAllows to use a door or window as an anchor point.Max. spacing 1100 mm - 1 user only can be connected.Spacing to 800 mm - 2 users can be connected. Veryfast and easy to set up.Weight: 10 kgCE 0123 EN 795B

K0006RP00

REDBLOCKAnchor device, that extends lifetime of the rope whentoproping ideal partner for adventure parks, rope courses and

climbing gyms allows to be installed in two axises. for better traceability and inspection recording the

RedBlock is marked with the unique productionnumber.

Max. diameter of rope: 12 mmunique production number

Color: redWeight: 375 g (13.23 oz)Material: stainless steelSheave: light alloyMax. diameter of rope: 12 mmStrength: 26 kN

unique production numberCE 1019

38

slings and lanyards

CE 1019 EN 566 EN 795B EN 354

W2001Y060

W2001A080

W2001R120

W2001B150

[cm]

60

80

120

150

[in]

24

32

47

60

kN

22

22

22

22

type

CE 1019 EN 354 EN 795B

W2000X060

W2000X080

W2000X120

W2000X150

[cm]

60

80

120

150

[in]

24

32

47

60

kN

30

30

30

30

type

CE 1019 EN 354 EN 795B

W2015X060

W2015X080

W2015X120

W2015X150

[cm]

60

80

120

150

[in]

24

32

47

60

kN

22

22

22

22

type

OPEN SLING 22 kNsewed sling, width: 20 mm

SLING LANYARD 22 kNsewed sling made of two layers of strengthstrap wear indicationwidth: 20 mm

EYE SLING 30 kNsewed sling made of two layers of strengthstrap wear indicationwidth: 20 mm

M = 15 m

L = 20 m

(1)

S = 10 m

(2)

mobile anchoring system

39

slings and lanyards

CE 1019 EN 354 EN 795B

W2300W060

W2300W080

W2300W120

W2300W150

[cm]

60

80

120

150

[in]

24

32

47

60

kN

22

22

22

22

type

CE 1019 EN 354

[cm]

25/45

25/65

100/100

[in]

10/17

10/30

40/40

kN

22

22

22

type

W2200W001

W2200W002

W2200W100

LANYARD "I" 22 kNlanyardrope diameter: 10,5 mm

LANYARD "V" 22 kNlanyardrope diameter: 10,5 mm

W232OWR

ANCHOR LANYARD "I"22 kNanchor deviceLength: 2, 5, 10, 15, 20 m or on customers request

FINE LINEMobile anchoring system colour distinction of the lengths allows 2 persons movement easy to adjust and manipulate manpower sufficient for fastening when installing

the system ratchet does not damage the webbing

W1001WW10 Fine line 10 (1)W1001WW15 Fine line 15 (1)W1001WW20 Fine line 20 (1)W1002WS10 Fine line bag 10 (2)W1002WY15 Fine line bag 15 (2)W1002WO20 Fine line bag 20 (2)

CE 1019 EN 795 B

40

CE 1019 EN 354 795 B

W2100X060

W2100X080

W2100X120

W2100X150

[cm]

60

80

120

150

[in]

24

32

47

60

kN

22

22

22

22

type

W2284XX03 - length 300 cm W2284XX05 - length 500 cm

STEEL ANCHOR "I"CE1019 EN795 B

W2283X130 - length 130 cmW2283X180 - length 180 cm

STEEL LANYARD "I"CE1019 EN354 EN795 B

W1045O

GUMMALanyard available in two lengths - min. 65 (max. elongation

100), min. 90 (max. elongation 150) different types of connectors (EN 362) possible to

sew in length when loaded with the weight of the user:

100 cm, 150 cmCE 1019 EN 354

Warning: Do not use as a fall absorber!

W2100X

LARA Lanyard and anchor device for working in heightmade from dynamic ropeLARA is tested according to EN 354 for lanyardsand also according to EN 795B for the anchordevices. Both ends of the rope are terminated withstitched eyes for placing carabiners. Strength seam isprotected with a plastic cover. Singing Rock recom-mends using carabiners with sling/rope fixation,which do not scroll in the loop and are all the timeready for use. LARA forms part of a fall arrest sys-tem and shall be used appropriately.WARNING: LARA lanyard can not be used as a fallabsorber!

lengths: 60, 80, 120, 150 cm

slings & lanyards

W0003BY09

AXILLAR Rescue sling to secure evacuated persons againstaccidental fall during the rescue action (e.g. ski liftevacuation).Weight: 355 gEN 1498 type A

W1036W130

TRACKAdjustable anchoring strap and workpositioning lanyard length adjustment from 80 to 130 cmCE 1019 EN 354 EN 358 EN 795 B

41

slings & lanyards

C2085

QUICKDRAW SLINGS16 mm22 kNwidth: 16 mmlengths: 11, 13, 16, 20 and 30 cm / 4.4, 5.2, 6.4, 8 and 12 inCE 1019 EN 566 UIAA

C2000

DYNEEMA QUICKDRAWSLINGS 11 mm22 kNwidth: 11 mmlengths: 11, 13, 16, 20 and 30 cm /4.4, 5.2, 6.4, 8 and 12 inCE 1019 EN 566 UIAA

C2075

SLINGS 16 mm22 kNwidth 16 mmA light and strong nylon slings availablefrom 60 to 150 cm.width: 16 mmlengths: 60, 80, 120 a 150 cm /24, 32, 48, 60 inCE 1019 EN 566 UIAA

C2001

DYNEEMA SLINGS 22 kNLight, thin and still very strong.These 11 mm slings are ideal for all applicationswere weight and strenght come first.lengths: 60, 80, 120 a 150 cm / 24, 32, 48, 60 inCE 1019 EN 566 UIAA

C2419

SAFETY CHAINInnovated daisy chain:Innovated device, double loop at the end, whichprovides a safe, adjustable attachment of the climberto the anchor point. 16 mm webbing in the form ofan adjustable lanyard which avoids DANGEROUS useof the traditional daisy chain.

Safe way to shorten your adjustable lanyard to anyloop without using more than one carabiner or unclipthe first loopSafety Chain can be shortened to any loop safely. 11 loops safetychain 140 cm / 56 in 9 loops safetychain 120 cm / 48 in

CE 1019 EN 566 UIAA

C2004

DYNEEMA SLING 8 mmThis 8 mm sling isideal for all applications were weight andstrength come first.Length: 60 cm, 120 cm / 24 in, 48 inStrength: 22 kN

CE 1019 EN 566 UIAA

42

slings & lanyards

W1024BX

FOOTER IIascender webbingwithout maillon Dimension:Min. length: 50 cm (19.7 in)Max. length: 150 cm (59 in)Weight: 145 g (5.11 oz.)Max. load: 200 kgRock&Lock smart buckle (steel).

W1025BX

FOOTER II COMPLETEascender webbing with maillon Dimension:Min. length: 50 cm (19.7 in)Max. length: 150 cm (59 in)Weight: 180 g (6.35 oz.)Max. load: 200 kgRock&Lock smart buckle (steel)

C2150BY

JACOBUltra light six step ladder Steps reinforced with plastic to hold its shape evenunder load. Maximum load: 500 kg. Maximum load for grab loop 100 kg.

S1100BY

PULLERAccesory webbing for chest ascender fixation fixes chest ascender in right position fixed by accessory sling or a mailon

carabiner to front/back attachment point on the harness

Color: blackSize: UNIWidth: 25 mm

43

belay devices

K6180ZO - stainless steelK6180BB - light alloy, black matt

RESCUE FIGURE EIGHTSpecial figure eight for the rescue situations andfast rappeling40 kNmaterial:stainless steel, light alloyweight:steel 451 g (15.9 oz), light alloy 154 g (5.43 oz)

K6021EEK6021BB - black matt

FIGURE 8 MDesigned for ropes of smaller diameters.25 kN color mix light alloy 104 g 3,67 oz.


FIGURE 8 LDesigned for ropes of bigger diameters.30 kN color mix light alloy 125 g 4,41 oz.

for ropes of various diameters easy rappelling effective heat distribution

44

belay devices


BUDDYBuddy is light and compact belay tube.For all round climbers.Designed for ropes 7,8 - 11 mmmix color 54g 1,91 oz.

Here s the reason that a lot of climbers aren t bealy-ing with a figure 8. The Buddy is extremely smoothon rappel, locks off a falling climber quickly, and feedrope like dream. Great heat dissipation on rappel.

K6140EE00K6140BB00 - black matt

SHUTTLEBelay and rappel deviceOne device to do it all, the Shuttle offers maximumversatility. It has a groove, designed and shaped toprovide equal friction for both thin and thick ropes.When youre belaying from above, the guide modelets you bring up one or two seconding climbersunder control. For lowering, it has a small secondaryhole that you can clinch carabiner or sling to releasethe device.

designed for twin, half and single ropes lightweight and compact V-grooves for high friction when belaying the leader

or rappeling only 65 g - one of the lightest belay devices on the

market self locking function when belaying the second eye for releasing the weight possibility of simultaneous belaying two climbers

rope diameter: 7.8 10.5 mm weight: 65 g / 2,29 oz. material: light alloy

self braking devices

W1010BB09

LOCKERGuided type fall arrester and work positioningdevice. for 11 mm textile ropes (recommended Singing

Rock Static 11) parking cam for blocking in required position system of releasing LOCKER when loaded unopenable version together with 11 mm sewn-in

rope available as SITE - work positioning lanyard unique production number

Color: black mattWeight: 188 g 6.63 oz

CE 1019 EN 353-2 EN 358

W1015B020

LOCKER SLINGCertified sling for connection the LOCKER withyour harnesslength: 20 cm

CE 1019 EN 354

W1011WB02 - length 200 cmW1011WB04 - length 400 cm

SITEThe work positioning lanyard with greathandling makes your work safe and efficient 11 mm rope sewn-in unopenable version of

LOCKER - rope clamp (fall arrester) rope covered with tubular webbing parking cam for blocking in required position available with stitched-in connector in accordance

with EN 362

Weight: 560 g (with connector),410 g (without connector)CE1019 EN 358 EN 353-2

45

descenders & ascenders

K030DSD30

DOUBLE STOPDescender with double locking and anti-panic sys-tem: self-breaking in case of accidental loss ofdescent control. Sensitive handle enables smoothdescent without harmful rope twisting. Also suitablefor works at a height and for emergency self evacu-ation. rope 11 mmfor rescue situation according to EN 341 rope 10 - 12 mmfor working situations according to EN 12841

Size: UNI Weight: 340 gCE 0123 EN 341 EN 12841

K6400BB

CAM CLEAN rope 8 - 13 mmChest ascender for safeand smooth ascentSize: UNI Weight: 140 g CE 0333 EN 567

K6392BB

LIFT LEFT rope 8 - 13 mmHand ascender for safeand smooth ascentSize: UNI Weight: 215 gCE 0333 EN 567

K6391BB

LIFT RIGHT rope 8 - 13 mmHand ascender for safeand smooth ascentSize: UNI Weight: 215 gCE 0333 EN 567

K01001BB

INDY EVOManually operated descender device with doubleauto-locking system,that locks both when the leveris released or when it is pressed.INDY EVO is also a descender device (conform to EN12841 type C) for working rope and it allows adescent at a controlled speed and stop at any time,hands free, on a static rope (EN 1891) or dynamicrope (EN 892).It allows the lowering of two people at the sametime.weight: 450 gcertifications: static ropes (EN 1891) 11 mm EN 341(2,A):11EN 12841/C:06static and dynamic ropes (EN 1891 - EN 892) 1012 mm (one person) 1112 mm (two people)NFPA-Lstatic ropes (EN 1891) 1013 mm (one person)

46

pulleys

W0023BB00

RESCUE POLERetractable Pole for attaching and removing ananchor remotely Remote rescues Pole has a 2.8m reach Slim fit shoulder bag with carabiner loop which

holds all components Stainless steel head which holds Big Connector

Giga Carabiner holder works with Hypnos Triple lock

carabiner Available with three different connectors

Materials: Fiber glass pole Brass bush Stainless steel attachments

K0040EE00K0040BB00 black versionPULLEY MINI ROLL small, lightweight and durable

pulley for various uses. designed mainly for hauling

systems.22 kNmax. rope: 13 mmstatic and dynamic ropessheave: light-alloy, diameter 20 mm bearing: self-lubricating bushingweight: 87 g (3.07 oz)unique production number

CE 1019 EN 12278

K0041EE00K0041BB00 black versionPULLEY EXTRA ROLL durable and lightweight pulley designed and optimized for use

with a Prusik friction knot attachment point accepts up to

three carabiners. ball bearings and large sheave

diameter for high-efficiency32 kNmax. rope: 13 mmstatic and dynamic ropessheave: light-alloy, diameter 48 mmball bearingworking load: 3 kNweight: 255 g (9.00 oz)unique production number

CE 1019 EN 12278

K0042EE00K0042BB00 black versionPULLEY TWIN ROLL durable and lightweight pulley designed and optimized for use

with a Prusik friction knot attachment point accepts up to

three carabiners. ball bearings and large sheave

diameter for high-efficiency36 kNmax. rope: 13 mmstatic and dynamic ropessheave: light-alloy, diameter 48 mmball bearingworking load: 2x3 kNbottom attachment point: 12 kNweight: 424 g (14.9 oz)unique production number

CE 1019 EN 12278

K6380BBTANDEM PULLEY25 kN max. rope:static and dynamic ropes 13 mmsteel cable: 12 mmstainless steel ball bearing

CE 0333 EN 12278

Pulleys of various construction for rescue activities or heavy weights lifting.

K0004BB

EASY LIFTRescue pulley for progression and evacuation alongski lift cable.Max. diameter of steel rope 55 mmSheave PA to be connected directly to the carrying cable

of ski lift intended for evacuation of person during

rescue action

ATTENTION! never use pulley alone - always use together

with back-up lanyard never use without braking ropeFor better traceability and inspection this part ismarked with the unique production number.

CE 1015

connectors:W0024XX01 - for HYPNOSW0024XX02 - for BIG CONNECTORW0024XX03 - for GIGA CONNECTOR

W0024XX01

W0024XX02

W0024XX03

47

fall absorbers

REACTOR 2Shock absorber parts exposed to abrasion covered with a tubular

webbing shock absorber covered with a textile sheath. shock absorber can be easily taken out and dried. methodical and identification label is placed inside

the textile cover light alloy ring enables to shorten a webbing in

a half different webbing lengths are produced on cus-

tomer's request connectors and shock absorber cannot extend 2 m possibility to stitch-in a connector (EN 362) length of completely ripped out fall absorber 140 cm

CE 1019 EN 355

Reactor 2 I 85

Reactor 2 Y 85 Reactor 2 Ring Y 155 Reactor 2 Eye Y 155

type code connectors length inc. black version

shock absorber m

I 85 cm W4220WW00 max. 2

W4230W085 1,05

W4231W085 K370 1,05

W4232W086 K353 1,17

W4233W087 K355 1,27

I 155 cm W4230W155 1,65

W4231W155 K370 1,65

W4232W155 K353 1,87

W4233W155 K355 1,97

Y 85 cm W4240W085 1,05

W4241W085 K370 1,05

W4242W085 K353 1,17

W4243W085 K355 1,27

Y 155 cm W4240W155 1,65

W4241W155 K370 1,65

W4242W155 K353 1,87

Eye "Y" 155 cm W4253W155 K355 1,97

Ring "Y" 155 cm W4270W155 1,65

W4271W155 K370 1,65

W4272W155 K353 1,8

48

fall absorbers

JOULEW4100Y120 - 120 cmW4100Y160 - 160 cm

The fall absorber Joule presents optimal solution forsecuring persons working on horizontal construc-tions and roofs.Joule is activated after reaching the load of 2 kN(200 kg).Minimal guaranteed strength after the breakingaction is 15 kN.

CE 1019 EN 355

W4000B165

OCTOPUSFall absorber integrated with lanyard fall absorber integrated with lanyard excellent absorbing behaviour (impact force 4,5 kN) guaranteed load before activation 2,2 kN minimum breaking strength after breaking action

15 kN each product marked with its unique production

number

CE 1019 EN 355

1 2 3 4 5

8 9 10

X0013XX02 Wire (diameter 2 mm) X1023 Monty bagX0015XX00 Marker of textile PPEX0016XX00 Gas Hot KnifeX0017XX00 Sliding GaugeX0018XX00 Measuring Tape (without picture)X0019X400 Silicon Based Lubricant

(without picture)X0020XX00 Illuminated magnifierX0004GB00 ThermocutterL9991WB Periodic control labels

+ plastic films (price per package)E0014XX00 File (without picture)

1234567

89

10

11

equipment for checking of PPEM000XSET

49

actsafe

X002XX04

PME POWER ASCENDERThe ActSafe PME Powered Rope Ascender is arugged tool for hard work, scorching heat or bitingfrost doesn't matter. This is a heavy duty tool madefor professionals.

It is powered by a strong and lightweight 4 strokeHonda engine and best described as personal eleva-tor that climbs a standard rope. It allows you towork faster and more ergonomically at height.

It is a lightweight alternative to other lifting equip-ment. An already high lifting capacity that can befurther extended by a pulley system makes it idealfor lifting/dragging material and equipment.

Ropes:Static / semi static rope 10-13 mm EN1891 (11mm preferred)

Safe Working Load:200 kg

Max Working Load (rescue only):250 kg

Ascent Speed:0-17 meter per minute with a load of 120 kg.

Descent Speed:Not applicable. The PME Power Ascender goes onlyin one direction - up. A setup including a descend-ing device is required in order to work in two direc-tions

Working temperatures: -20 to +40 degrees

Range: On a full tank of fuel the range with 120 kgload is 700 meters.

Weight: 10.4 kg

Dimensions: 47 x 25 x 28 cm

Engine: Honda GX35 4 stroke

Recommended Fuel>95 octane unleaded gasoline.

X0100XX

ACC POWER ASCENDER IIAdvantages with the ActSafe ACC power AscendersystemThe short set-up time involves that the work can bedone in a manner that is quick, safe and less expen-sive than if performed with for example a sky lift.Clean and silent operation, ActSafe ACC is ideal forwork and rescue indoors and in confined spaces.It is a light weight alternative to wire winches.The combination of the high lifting capacity andthe sophisticated up/down control makes it perfectfor lifting or dragging material and equipment.It is a versatile tool that can be used in places whereit is impossible to use a sky lift or a powered plat-form.

Technical DataRopes: The standard rope grab system allows static/ semistatic rope 10-13 mm EN1891. The tacticalrope grab system allows ropes from 7 to 9 mm.Max Working Load: The Safe Working Load (SWL) is200kg. When used in a rescue situation with proper-ly trained personnel the total load must not exceed250 kg. However, if the load superseeds 265 kg, theoverload is monitored electronically and the power isautomatically switched off.Ascent and Descent Speed: The speed of ascent anddescent can be continuously adjusted from 0 to 22meters per minute. Speed and direction is controlledwith one hand, you have always one hand free. If thebattery runs out of power during ascent or descentthe emergency descender can be used in order to getdown. The descent speed is approximately 0,5 m/sBattery Life Time: The normal life time of the batteryis 800 to 1000 charging cycles.Temperature Range: -10 C to + 40CWeight: 18 kg including the internal battery. Dimensions: 40 x 30 x 25 [cm]

50

special devices Tractel

A0057AP00

EVAK 500Rescue deviceThe EVAK 500 is a winch-hoist with unlimitedlength of textile rope and a lifting or pulling capacityof 500 daN. It has been specifically designed for useby the professionals of the emergency rescue servic-es. It is a machine for lifting or pulling a person ormaterials by the to-and-fro movement of a leverlinked to two self-gripping sliding jaw blocks.

A0058XX00

SPARE PARTSafety pin 500

A0128

DEROPE UP ARescue deviceThanks to their manoevering steering wheel, thederope UP recovery descent devices enable theupward removal of a person that has fallen into astructure. They are equipped with a recall mechanismand rope clam cleat. Usage and descent speed areidentical on descent devices only.

Complies with the EN 341 and EN 1496 Standards.

One person descentmax. height 400 m - max. load 150 kg Two person descentmax. height 125 m - max. load 225 kg

A0032WA20

DEROPE STDRescue deviceThe Derope KT is designed for evacuating peoplefrom a height limited to 40 m. Attaching more than one person on the descendingend is prohibited. Self-trigger device.

A0001SS38A0001SS64

I - MOBILEmobile anchor point I - mobile follows user aroundthe framework with a minimum of his intervention.Can be installed on the upper or lower soleplate and1 user only can be connected.Two models:1. 120 - 380 mm [A0001SS38] - weight 1500 g2. 120 - 640 mm [A0001SS64] - weight 2000 gAdjustable from 120 mm to 640 mm.CE 0123 EN 795B

A0034AA00

TRIPODAdjustable telescopic feet with pivoting sole plate.Height: min. 1.74 m, max. 2.48 mWidth: min. 1.10 m, max. 1.63 mWeight: 17 kgEN 795-B, EN 1496

Accessories: A0040AA02 - BLOCFOR 20 RWith securing system. Cable length: 20 m.

A0040AA03 - BLOCFOR 30 RWith securing system. Cable length: 30 m.

A0037BA02 (M20), A0037BA03 (M30)CAROL + CONSOLE Winch 250 kg250 kg capacity.Available cable lengths of 20 and 30 m.

A0045XX00

POLE PERCHE 6 m6 m long pole. Enables the settings up of a lifelinefrom the ground or from safe place.Standard: CE, EN 795 class BFibreglass poleWith adapter for carabiner AM53 (A0046XX00)

Rod: weight: 2,4 kg, dimensions: 2,40 m folded,6,20 m unfoldedConnector: weight 0,55 kg, gate opening (d) 53 mm

51

retractable fall arresters Tractel

A0003AA

BLOCFOR 2Wpolyester webbingwidth 45 mmlenght: 2 m

CE 0320 EN 360

BLOCFOR 10, 20, 30Retractable fall arrest system with10-20-30 m deal of freedom of movement.

CE 0082 EN 360

A0005AA

BLOCFOR 6Spolyester webbingwidth 15 mm + 2 carabiners lenght: 6 m

CE 0320 EN 360

BLOCFOR 10 BLOCFOR 20 BLOCFOR 30

cable M46* M47** M46* M47** M46* M47**

galvanized steel cable A0010AA01 A0020AA01 A0010AA02 A0020AA02 A0010AA03 A0020AA03

stainless steel cable A0011AA01 A0021AA01 A0011AA02 A0021AA02 A0011AA03 A0021AA03

aramid cord A0012AA01 A0022AA01 A0012AA02 A0022AA02 A0012AA03 A0022AA03

* M46: automatic carabiner with fall indicator* M47: automatic carabiner without fall indicator

A0004AA

BLOCFOR 5Spolyester webbingwidth 20 mm + 2 carabinerslenght: 5 maluminium casing

CE 0320 EN 360

SINGING ROCK offers all technical servis for Blocforproducts and the other Tractel devices which we sell.For any other model or connector, please ask oursales department.

www.singingrock.com

52



workingactivities

4 18 26 32 36 52 62

accessories & promotional

53


GEAR BAGWaterproof, durable and washableVery convenient to carry your gear.Takes up little space and stays dry. Transparent pocket (A4) on the top flap for yourdocuments. intended for speleology and working at heights washable minimum amount of seams main seams feature HF welding durable material colors: yellow and black

S9000BB35 - GEAR BAG 35 l blackS9000YY35 - GEAR BAG 35 l yellowS9000BB50 - GEAR BAG 50 l blackS9000YY50 - GEAR BAG 50 l yellow

C0046BB

EXPEDITION BAGTARP DUFFLE 70, 90Its not your average duffel bag Made froma durable laminate material, the TARP DUFFEL is analmost indestructable bag. Resilient enough to be roughed up in-flight, or to betransported up a mountain via a yak or off-roadvehicle, this is one burly duffel bag.For longer trips, grab the 90 liter size so you haveenough room for all your gear Alpine-cut shoulder straps Dual daisy chains Twin haul handles on ends Rugged construction with extra bartacks and dou-

ble stitching Four compression straps Internal mesh pockets Pocket on top

Capacity: 70, 90Color: blackWeight: 1820 g (70 l), 2270 g (90 l) (15g)Material: PVC

C0046BB70 - 70 litres, blackC0046BB90 - 90 litres, black

W1023

MONTY BAGBag for your gear and documentsadjustable shoulder strap made of high resistant and durable fabric

POLYMAR washable durable material colors: grey, yellow, orange, red

W0052B010

WORKING BAGTransport bag for working harnesses - also suitableas a gear bag for tools made from high abrasion resistant material PES

600 g/m2 simple closing system with a plastic buckle net on the bottom for better airflow (the bag is not

waterproof) transparent pocket for the name tag or instruction

of use wide opening for easier putting in the harness or

gear inside stichting covered by lace webbing

Color: blackWeight: 125 g ( 15 g) 4.4 oz ( 0.5 oz)Material: PESCapacity: 10 litres

W0008BS

TOOL BAGHardware carrier and organizer made of high resistant and durable fabric POLY-

MAR inside and outside pockets for hardware intended to be atached directly to the harness via

carabiner or using additional waist belt well arranged easy to maintain

maximum load -10 kg dimension - 23 x 23 x 9 cmcarabiner is not included

54


W9700BY

OVERALLWorking overall combining durability, working comfortand maximum freedom of the movement. Speciallyintended for working at heights, easy and quick totake off even without taking the shoes off. 60% Polyester/40% Cotton 250 g/m2, 500D

Cordura compliant with EN 340 bright colors and reflective strips increase the

workers visibility high durability even when its washed at high tem-

peratures (90 C) full-length overall with two zippers to guarantee

high comfort, practicality and a high speed whenputting-on

adjustable waist for optimum working comfort elastic fabric in the armpits and crotch two large breast pockets on the left sleeve pocket with compartments for

mobile phone, pens, small items on the left leg extremely large pocket for plans,

gloves, etc. on the right leg pocket for rescue knife supple-

mented by two rings of rubber for protectionagainst falling

on the back zipper pocket for small items all pockets marked with bright color for greater

comfort pants, collar and sleeves ending with adjustable

Velcro against heat loss, the penetration of dirt,snow, etc.

pants tested in the fields of work at height, rescue,arboriculture

Size: M, L, XL

W9800BB

WORKING PANTSLightweight working pants with high flexibility.Combining durability, working comfort and maximumfreedom of the movement. Specially intended forworking at heights. 98% Cotton, 2% Elastane, 250 g/m2, 500D Cordura compliant with EN 340 bright colors and reflective strips increase the

workers visibility material ELASTAN guarantees a very high comfort

during movement and thus the resistance jeans low cut for comfortable fit higher back for comfortable fit with a working har-

ness large two loops for braces two deep pockets large zippered pocket for mobile phone or small

items, including loops to ensure against the fall pocket for rescue knife supplemented by two rings

of rubber for protection against a fall in the narrow side seam pocket for a pencil on the back zipper pocket for small items all pockets marked with bright color for greater

comfort front part reinforced with Cordura pants ending with adjustable Velcro against heat

loss, the penetration of dirt, snow, etc. pants tested in the fields of work at height, rescue,

arboriculture...

Size: S, M, L, XL

A00510S

DANTEPocket knifewith first class toothed stainless steel bladeBlade length 80 mm, one hand operation andsafety lock of opened knife.Blade - stainless steel, orange plastic handle,stainless steel flexy clip.Weight: 83 g

A0031BS

WORK KNIFEPocket knife with first class stainless steel bladeBlade length 80 mm, one hand operation and safety lock of opened knife.Blade - stainless steel, plastic handle, stainless steelflexy clip.Weight: 61 g

A003OY

RESCUE KNIFESpecial knife with first class stainless steel ejectionbladeBlade length 80 mm and safety lock of opened knife.Special shape of the blade with the hook at the endfor cutting of ropes or webbing.Other features: glass cutter, hammer for glass win-dow breaking, opener of electrical cases - wrench.Blade - stainless steel. Stainless steel flexy clipWeight: 196 g

55


C0006HH

GRIPPY 3/4Made out of quality leather. Reinforced palm areaand lower part of finger area. Exposed fingertips allow you to keep your sense oftouch and manipulate your gear. Gloves are easy to put on thanks to a special pull-on loop.Kevlar thread.Size: 8, 9, 10, 11

C0006BH

GRIPPYMade out of quality leather. Reinforced palm area.Closed fingers. Abbrasion resistant. Gloves are easyto put on thanks to special pull-on loop. Kevlarthread.Size: 8, 9, 10, 11

W9001B

TUNDER NOMEXTactical glovesIts a five fingers glove made from black Nomex tex-tile and leather. Palm of the glove is made from goatskin with hydrophobic treatment. The palm isequipped with sophisticated reinforcement underlaidwith Kevlar-Nomex felt. The glove finishes inknitwear of the same constriction as a dorsum of theglove.

Size

sr_working_2013_en.pdf

Documents

singing rock products

safety equipment

singing rock run

range of equipment available

anchor points

height harnesses

innovative productsare

workat heights