ssangyong cutting tools overview - hkrventures.com
TRANSCRIPT
B A ' ;frjSm/ ' *, I ’ .
<A±giAX gF *
6ERABIT
/'
WBHFH
•|A VjA ' /' '
' V’ L - ±
• - In -it: \2*vPk^ -» w
— -w
V V£/ --
I
*
CUTTtflG TOOLSff -,a
TM " : ^ - SMCERAMIC / CERMET / PCBN / PCDTOOL HOLDER / MILLING CUTTERENDMILL / DRILL / CHUCK
B«*
i
M
Ll
I
ANGYON
SSANGYONG CERAMIC
9
& *.
tI* -
Excellent productivity with high-speed machining
Ceramic Al203+TiC(N) ST100
TiC+AfcOsAl203+Zr02
SisN4
'tm ^ >
— Cutting for steel and cast iron
General machining for hard material
H- Finishing for hardened steel and cast iron
Fine finishing for hardened steel and cast iron
TiN coated ceramic
TiN coated ceramic
AITiN coated ceramic
AITiN coated ceramic
— Turning for ductile cast iron
— Medium cutting for cast iron
— Medium cutting for cast iron with high hardness
— Roughing and interrupted cutting for cast iron
— Fleavy interrupted cutting for cast iron
— General roughing for cast iron
— Roughing for hard material with high speed
— Roughing for hard material with interruption and high speed
— General machining for high temperature alloy and inconel (Dry)
General machining for high temperature alloy and inconel (Wet)
— High Speed Steel, High Chrome Steel in medium or low speed cutting
— Nickel Base Alloy, Cobalt Base Alloy in high speed cutting
SD200SZ200SZ300SN26SN300SN400SN500SN600SN800
W400W800
www.ssym.com
CERMET / PCBN / PCD SSANGYONG
t
*T *w
< » *
T
/*
CermetTX510 / 515 / 520 / 530Stability in high-speed machining for hardened steel
Mi m m&m
TiCN I- Mild Steel, Carbon Steel, Alloy Steel
Finishing + PVD =
I- Mild Steel, Carbon Steel, Alloy Steel
Finishing, Medium + PVD =IBearing Steel, General Steel
Finishing, Medium + PVD =II- Mild Steel, Carbon Steel, Alloy Steel
Medium, Roughing + PVD =I
PCBN / PCDSBN1000 / 2000 / 3000 / 4000 / 5000SPD1000 / 2000 / 3000Wide-range applications with variety and accuracy
-</PCBN
PCD
SBN1000SBN2000
SBN3000SBN4000SBN5000
SPD1000SPD2000
SPD3000
High Flardness cast iron / Nodular cast iron
Continuous cut of hardened steel
bearing steel / forged steel
Light interrupted cut of hardened steel
Fleavy interrupted cut of hardened steel
- Solid type PCBN
Rough machining of cast iron
Plastic alloy / Wood
Aluminum / Zinc / Copper
Aluminum alloy
Powdered Carbide
Sintered Carbide ISwww.cerabit.com
sSSANGYONG TOOL HOLDER
/ S& "
% 1s/
y /
Standard & Special Tool Holder
Carbide Boring BarsOutstanding surface performance for vibration cuttingcondition and rigidity superior to steel bars 1i
-
www.ssym.com
MILLING CUTTER SSSANGYONG
!•
r 40- *•1»Jr *
c -SSft
mHigh-speed cutting with fine surface finish
StandardSsangyong offers high performancecutting abilities through maximumedge strength and tool-life.
3Sr!'
y mfiT
V
Aluminum
(c
..Higher SpeedLightweight aluminum cutterimproves tool-life with accurateperformance and higher productivityby preventing chattering in highspeed machining(10,000-12,OOOrpm).
Special
r
,1i
i
*m mwww.cerabit.com
sSSANGYONG ENDMILL / DRILL
Various applications with excellent wear-resistance and longer tool-life
SolidCarbideEndmill
SolidCarbideDrill
High hardened & highspeed machining endmill
Diamond coating endmill
Standard drill
Endmill fordifficult-to-cut material
Standard Endmill
t
flSolid standard drill
1
Endmill for non-ferrousmaterial
www.ssym.com
CHUCK SSSANGYONG
y*8S!eSwsi
11I.
JBB
* *AONV8SsowawrvoovNSH
OMOAONV8S I
*
Advanced system to completely prevent penetration of oil, grease, coolant or chips
HydraulicChuckHigh T.I.R accuracy and repeatabilityof < 3 guarantee to have a preciseinterference between tool cuttingedge and workpiece. y
1;
TenfUlillTVfl
Shrink FitChuck
Ii ii I ^a SB_ f n ' 1l•
Milling Chuck1 0 0
-1
I 1 1 1
2»
High T.I.R accuracy < 3wnG2.5 25,000rpm machiningExtension sleeve max 300mm
Ssangyong milling chuck showsadvanced tool-life and excellentclamping power with semi-perma-nentretainer containing 300 pcs of bearings.
Accuracy : O.OImm(T.I. R) on100mm nose of cam
www.cerabit.com
SSANGYONG
— — =It*
Best Choice for High ProductivitySsangyong Materials Corporationhas utilized its in house technologies withexpertise accumulated over 50 years throughmanufacturing experience of various materials.
USA GERMANY • JAPANJDM INTERNATIONAL, INC SSANGYONG EUROPE GMBH GS Global Japan21346 Provincial Building, Katy, TX 77450,USATel : +1 (281) 556-5180Fax : +1 (281) 556-5122E-mail: [email protected]
Mergenthalerallee 77, 65760 Eschborn,Taunus, GERMANYTel : +49 (0) 6196-481756Fax : +49 (0) 6196-43439E-mail: [email protected]
|*|CANADAJCO INTERNATIONAL Co., Ltd#9439, 22ST SW Calgary, AlbertaT2V1S2 CANADATel : +1 (403) 714-0575Fax : +1 (403) 238-5935E-mail : [email protected]
|#|MEXICOGLOPAC, INC2230 W. Chapman Ave. Suite 207, Orange,CA 92868, USATel : +1 (714) 385-2802Fax : +1 (714) 978-9621E-mail: [email protected]
o BRAZILMB COMERCIO DE FERRAMENTAS LTDARua Antonio Jorge Chebab, 1639-VilaLeontina Sumare-SP, BRAZILTel : +55 (19) 3873-6778Fax : +55 (19) 3873-6264E-mail: [email protected]
RUSSIATD HALTEC' LTD27 Radischeva Str., Ulyanovsk, RUSSIATel : +7 (8422) 41-4717Fax : +7 (8422) 31-0601E-mail: [email protected]
2sJLi2 UNITED KINGDOMKYOCERAUNIMERCO Tooling Ltd.101 Atterdiffe Road Sheffield S4 7WW, UKTel : +44 (0) 1142 788787Fax : +44 (0) 1142 757155E-mail: [email protected]
|ITALYDALCASONTRADINGs.nl.Corso Grosseto, 362/A, 10151 TorinoTel : +39 (011) 739-3839Fax : +39 (011) 739-3607E-mail: [email protected]
UT.S.G. s.r.l.Via Cacciamali, 52 25125 Brescia, ITALYTel : +39 (030) 302338Fax : +39 (030) 301803E-mail: [email protected]
it SPAINAYMAHERRAMIENTAS, S.ABarrio Santa Lucia S/N, 20709 Ezkio- Itsaso, Gipuzkoa, SPAINTel : +34 (943) 72 92 04Fax : +34 (943) 72 92 05E-mail: [email protected]
SOUTH AFRICAMULTITRADE DISTRIBUTORSKempton Park 1620, Kuschke Street,Route 24, Meacowdale, SOUTH AFRICATel : +27 (11) 453-8034Fax : +27 (11) 453-9696E-mail: [email protected]
5th FL„Nisso22 Bldg, 1-10, 1-Chome,Azabudai, Minato-Ku, Tokyo, 105-0001,JAPANTel : +81 (3) 6831-5130Fax : +81 (3) 5575-9091E-mail: [email protected]
HIROSHIMA CORP.1-57, Fukiage-cho, Showa-ku, Nagoya,JAPANTel : +81 (52) 741-4590Fax : +81 (52) 741-4557E-mail: [email protected]
GOT CO., LTD1-7-7, Nishinippori, Arakawa-ku, Tokyo,JAPANTel : +81 (3) 3803-7281Fax : +81 (3) 3803-7282E-mail: [email protected]
9TAIWANCHOUS TOOL TRADING CO., LTDNo.172, Hwan-Pei Rd., Chung-Li City,TAIWANTel : +886 (03) 425-8819Fax : +886 (03) 425-3402E-mail: [email protected]
MALAYSIAGERMAN TOOLING SYSTEMS33, Jalan Puteri 5/20 Bandar, Duteri,47100 Puchong, Selangor, Darul Ehsan,MALAYSIATel : +60 (3) 8068-2331Fax : +60 (3) 8068-2386E-mail: [email protected]
INDIAASSOCIATED ENGINEERING SERVICES#47, Sri Balaji Nagar, Off Kundrathur Road,Gerugambakkam, Chennai-602 101,Tamil Nadu, INDIATel : +91-44-23821581E-mail: [email protected]
TURKEYKORTEK ENDUSTRIYEL URUNLER DISTlCARET A.S.IMES SANAYI SITES A109/1,Y.Dudullu-Umraniye, Istanbul, TURKEYTel : +90 (216) 540-1234Fax : +90 (216) 364-5445E-mail: [email protected]
THAILANDULTRA MASTER CO., LTD2/9 Serithai Road, Kwaeng Kannayao, KhetKannayao, Bangkok 10230 THAILANDTel : +66 (2) 736-4560Fax : +66 (2) 736-4694E-mail: [email protected]
mku,'flu,CERABIT
Ssangyong Materials Corporation1-85, Wolarm-dong, Dalseo-gu,Daegu, 704-832, KoreaTelFaxE-mail
+82 (53) 580-4210-4220+82 (53) [email protected]
www.ssym.com / www.cerabit.com
DISTRIBUTOR
EB-1410-PP