sse catalog

Upload: wfjerr

Post on 30-Oct-2015

163 views

Category:

Documents


0 download

TRANSCRIPT

  • w w w.FEMYERS.coM

    MYERS

    PROFESSIONAL SSE CATALOG PUMPS, TANKS, MoToRS AND coNTRoLS

  • ABoUT PENTAIR

    The Premier Name in Quality Pumps Since 1870Myers was founded in 1870 by Francis and Philip Myers in Ashland, Ohio. The brothers began by building farm implements and then engineered and manufactured the first double-acting hand pump that delivered water on both the up and down strokes. From this modest beginning, the Myers pump line grew and evolved over the decades to include wastewater removal and industrial pumps and systems. In 1960 the Myers family sold the business to the McNeil Corporation of Akron, Ohio. In 1986 the business was acquired by Pentair, Inc. of St. Paul, Minnesota, where Myers is part of this $3 billion corporations water products group.

    Myers is located on 80 acres in Ashland and operates in a modern 410,000 square foot manufacturing, distribution, foundry, and office facility, employing approximately 600 people dedicated to supplying top quality jet and submersible well pumps; utility, sump and sewage pumps; effluent pumps; non-clog and other large waste handling pumps; and high pressure reciprocating and centrifugal pumps and pumping systems for residential, agricultural, commercial, municipal and industrial applications for North America and more than 100 foreign countries.

    The Myers Mission is to provide extraordinary, responsive service and quality products so that our customers find it easy to do business with us.

  • LIMITED WARRANTY SUMP & RESIDENTIAL SEWAGE

    WARRANTY PERIOD

    During the time periods and subject to the conditions hereinafter set forth, Myers will repair or replace to the original user or consumer any portion of your new Myers product which proves defective due to defective materials or workmanship of Myers. Contact your nearest Authorized Myers

    Dealer for warranty service. At all times Myers shall have and possess the sole right and option to determine whether to repair or replace defective equipment, parts, or components. Damage due to lightning or conditions beyond the control of Myers is NOT COVERED BY THIS WARRANTY.

    Pumps: 12/24 months depending on model; 18/30 months from date of manufacture.

    Labor, etc. Costs: Myers shall IN NO EVENT be responsible or liable for the cost of field labor or other charges incurred by any customer in removing and/or re-affixing any Myers product, part or component thereof.

    THIS WARRANTY WILL NOT APPLY: (a) to defects or malfunctions resulting from failure to properly install, operate or maintain the unit in accordance with printed instructions provided; (b) to failures resulting from abuse, accident or negligence; (c) to normal maintenance services and the parts used in connection with such service; (d) to units which are not installed in accordance with applicable local codes, ordinances and good trade practices; or (e) unit is used for purposes other than for what it was designed and manufactured, and (f) if three-phase submersible motors are installed on a single-phase power supply using a phase converter or if three-phase power is supplied by only two transformers, making an open Delta system.

    RETURN OR REPLACED COMPONENTS: Any item to be replaced under this Warranty must be returned to Myers in Ashland, Ohio, or such other place as Myers may designate, freight prepaid.

    PRODUCT IMPROVEMENTS: Myers reserves the right to change or improve its products or any portions thereof without being obligated to provide such a change or improvement for units sold and/or shipped prior to such a change or improvement.

    WARRANTY EXCLUSIONS: Myers SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY AND

    FITNESS FOR A PARTICULAR PURPOSE AFTER THE TERMINATION OF THE WARRANTY PERIOD SET FORTH HEREIN.Some states do not permit some or all of the above warranty limitations and, therefore, such limitations may not apply to you. No warranties or representations at any time made by any representative of Myers shall vary or expand the provisions hereof.

    LIABILITY LIMITATION: IN NO EVENT SHALL Myers BE LIABLE OR RESPONSIBLE FOR CONSEQUENTIAL, INCIDENTAL OR SPECIAL DAMAGES RESULTING FROM OR RELATED IN ANY MANNER TO ANY Myers PRODUCT OR PARTS THEREOF. PERSONAL INJURY AND/OR PROPERTY DAMAGE MAY RESULT FROM IMPROPER INSTALLATION. Myers DISCLAIMS ALL LIABILITY, INCLUDING LIABILITY UNDER THIS WARRANTY, FOR IMPROPER INSTALLATIONMyers RECOMMENDS FOLLOWING THE INSTRUCTIONS IN THE INSTALLATION MANUAL. WHEN IN DOUBT, CONSULT A PROFESSIONAL.

    Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

    This Warranty gives you specific legal rights and you may also have other rights which vary from state to state.

    In the absence of suitable proof of the purchase date, the effective date of this Warranty will be based upon the date of manufacture.

    DETERMINATION OF UNIT DATE OF MANUFACTURE: Submersible Sump Pump (8-95) month and year stamped on pump nameplate; Column Sump Pump month and year on red warranty tag.

    1101 Myers Parkway Ashland, Ohio 44805888/987-8677 Fax: 800-426-9446

    269 Trillium Drive Kitchener, Ontario, Canada N2G 4W5519/748-5470 Fax: 519/748-2553

    For more information about Pentair Plumbing Products contact your local Myers Distributor, or our facilities in Ashland, Ohio.

  • 2013 Pentair Ltd. All Rights Reserved. M9000SSE (01/10/13)

    Because we are continuously improving our products and services, Pentair reserves the right to change specifications without prior notice.

    293 WRIGHT STREET, DELAVAN, WI 53115 WWW.FEMYERS.COMPH: 888-987-8677 ORDERS FAX: 800-426-9446

  • UtILItY PUMPs 4-8MES106 2

    MCU15/MCU15S/MCU20S Series 5

    MUSP125 6

    SPS-6 7

    DU25 8

    sUMP PUMPs 9-19MCSP Series 9

    SP25 Series 10

    S33 Series 11

    SSM33I Series 12

    MDC33/MDC50 Series 13

    MCI033/MCI050 14

    SX50 Series 15

    DS Series 16

    Sump Basin Package 17

    ED-25 Sink Pump System 18

    ED33 Series 19

    eFFLUent PUMPs 22-32S40HT 22

    S50HT Series 23

    ME3 Series 24

    ME40 Series 25

    ME45 Series 26

    ME Series 27

    P50/P100 Series 28

    MD Series 29

    2NFL and J-BE Series 30

    DE Series 32

    seWAGe PUMPs 33-45SRM4 33

    CMV5 34

    MW50 35

    MW Series 36

    WHR Series 37

    WHR5H-WHR20H Series 38

    DSW Series 39

    SR1830 40

    CMV1830 41

    SRM-BP BasinPro 42

    CMV-BP BasinPro 43

    MW-BP 44

    MRJ 45

    SRA Lift-out System 54

    CE, CMEP and CMW 55

    SMNO and SMNC Float Controls 56

    PM15NO Pipe Mounted Mercury Float Controls 56

    MFLC Wide-Angle Mechanical Float Controls 56

    ALC-18 Piggyback Switches 56

    20VM SJE Vertical Master Pump Switch 56

    MFS Series Pump Switch 56

    SA-1/OSA-1 Sump Alarms 57

    CA-SS4 Alarm and Connection Box 57

    Simplex, Duplex Structural Foam Junction Boxes 57

    Iron Caulking & Compression-Type Hubs 57

    Discharge and Conduit Flanges 57

    Check Valves 57

    Flexible Rubber Inlet Hubs 57

    Basins and Covers 57

    ACCessorIes 54-57

    WAsteWAter PUMPs 50-513MW Series 50 3WHV Series 51

    sPeCIAL PUrPose PUMPs 52-53Pro-Source Pumper 52 EPP Series Pump Control System 53

    GRINDER PUMPS 41-44MRG20 46 MRGD200 48 Turnkey Simplex Basin Package 49GrInder PUMPs 46-49

    BAtterY BACK-UP sUMP PUMPs 20-21 MBSP Series 20 MBSP-Plus Series 21

    TABLE OF CONTENTS

  • UTILITY PUMPS

    M9003sse

    MES106Multi-Purpose Pump

    Capacities 5 GPM 18.9 LPM

    Shut-off head 10 3.1 m

    Weight 4 lbs.

    Liquids handling drain water

    Intermittent liquid temp. 104 F 40 C

    Motor air-cooled brush motor

    Electrical data 115V, 2A, 1, 60Hz

    Discharge Standard garden hose

    Power cord 6

    Ideal for transferring water, filling tanks and draining shallow flooded areas

    Up to 5GPM with 10 head Connects to standard garden hose 115VAC with 9 power cord Removes standing water down to 1/8 depth Weighs only 4 lbs. Built-in carrying handle Includes 6 suction hose and floor drainer To operate, just attach a standard hose

    to pump discharge and plug into any 115V outlet. Air-cooled, high-torque, non-submersible

    motor with overload protection

    sPeCIFICAtIons

    FeAtUres

    PAGE 4

  • UTILITY PUMPS

    M9004sse

    CAPACITY GALLONS PER HOUR

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER HOUR

    20

    16

    12

    8

    4

    0

    6

    5

    4

    3

    2

    1

    0 25 75 10050 125 150 175 200

    0 100 200 300 400 500 600 700

    MCU20S

    MCU15/MCU15S

    CapacitiesMCU20SMCU15 / MCU15s

    200 GPH120 GOH

    757 LPH454 LPH

    Shut-off headMCU20SMCU15 / MCU15S

    2015

    6.1 m4.6 m

    Weight 3.25 lbs.

    Liquids handling drain water

    Intermittent liquid temp. 190 F 43C

    Motor Bearingless sealed motor

    Electrical data 115V, 1.45A, I, 60Hz

    Dimensions 11 x 5 x 4-3/4

    Discharge 3/8 i.d. plastic tubing (not included)

    Tank capacity 2 Quarts

    Housing ABS, high temp,.acid-resistant thermoplastic

    Power cord 6

    Ideal for the automatic removal of excess liquid which results from condensation

    MCU15 / MCU15S / MCU20S SeriesCondensate Unit

    sPeCIFICAtIons

    FeAtUres

    Advantages By Design Lifts to 20 (MCU20S)

    Lifts to 15 (MCU15/15S) Built-in safety switch Low-profile unit,

    only 4-3/4 high Thermal overload protection High temperature housing Built-in check valve Double-insulated enclosure

    Provides longer life than similar size condensate units

    Bearingless sealed motor offers a more reliable, longer life product

    * For indoor use only

    Applications Air conditioner Dehumidifier Icemaker High-efficiency furnaces Refrigeration systems Water coolers

    CAPACITY GALLONS PER HOUR

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER HOUR

    20

    16

    12

    8

    4

    0

    6

    5

    4

    3

    2

    1

    0 25 75 10050 125 150 175 200

    0 100 200 300 400 500 600 700

    MCU20S

    MCU15/MCU15S

    PAGE 5

  • UTILITY PUMPS

    M9156sse

    MUSP125Utility Sink Pump

    Capacities 40 GPM 151.4 LPM

    Shut-off head 14 4.27 m

    Weight 15 lbs.

    Liquids handling drain water

    Intermittent liquid temp. up to 120 F up to 50 C

    Motor 1/8 HP

    Electrical data 115V, 4A, 1, 60Hz

    Housing Thermoplastic

    Power cord 8 three-prong, SJTW

    Ideal for basement wet bars, laundry and utility sinks Designed to be used with a sink where gravity drain line

    is not available Fully automatic operation Complete, compact system Easy to install - eliminates the need for traps,

    vents and costly labor Quiet, trouble-free operation - easily mounts

    beneath your sink Includes pump assembly, one-way valve, discharge

    shut-off/flow balancing valve, strainer cup CSA listed

    sPeCIFICAtIons

    FeAtUres

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    14

    12

    10

    8

    6

    4

    2

    00 5 10 15 25 30 403520

    4

    3

    2

    1

    0

    125 1501007550250

    MUSP125 1/8 HP

    PAGE 6

  • UTILITY PUMPS

    M9005sse

    Capacities 20 GPM 75.7 LPM

    Shut-off head 22 6.7 m

    Solids handling 1/8 3.18 mm

    Liquids handling drain water

    Intermittent liquid temp. up to 140 F up to 60 C

    Motor 1/6 HP PSC

    Electrical 115V, 2A, 1, 60Hz

    Acceptable pH range 6-9

    Discharge, garden hose adapter

    3/4 threaded

    19.05 mm threaded

    Switch off/on manual

    Housing flame-retardant polypropylene

    Power cord 10, SJTW, SJTW-A

    Mechanical seal type 11A, carbon & ceramic

    SPS-61/6 HP Dewatering Utility Pump

    sPeCIFICAtIons

    FeAtUres

    Ideal for light-duty drainage applications such as flooded basements, flat roofs and swimming pool covers

    Draining small decorative pools (for repairs, painting)

    Effective and easy to use Removes standing water

    down to 1/8 depth Weighs only 9 lbs. Built-in carrying handle To operate, just attach

    a standard hose to pump discharge and plug into any 115V outlet

    Provides longer life than similar size dewatering pumps

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    22

    20

    18

    16

    14

    12

    10

    8

    6

    4

    2

    00 4 8 12 16 20 24

    7

    6

    5

    4

    3

    2

    1

    0 15 30 45 60 75 90

    SPS-6 1/6 HP

    Efficient PSC motor uses only 2A

    Air-filled motor housing; no oil required

    Full mechanical shaft seal lasts ten times longer than lip seals

    Built-in thermal overload protection

    CSA Listed

    PAGE 7

  • UTILITY PUMPS

    M9006sse

    DU251/4 HP Stainless Steel Utility Pump

    sPeCIFICAtIons

    Applications dewatering

    Capacities 19 GPM 71.9 LPM

    Shut-off head 23 7 m

    Operations manual

    Pump-down range 3/8 9.5 mm

    Solids handling 1/8 3.2 mm

    Liquids handling clear water

    Continuous liquid temp. 77 F 22 C

    Motor 1/4 HP, PSC

    Electrical data 115V, 60Hz, 2.5A, 3450 RPM

    Acceptable pH range 5-9

    Mechanical seal dual lip seal with ceramic shaft sleeve

    Housing stainless steel

    Impeller polyphenylene oxide

    Power cord 15 three-prong, SJTW 18-3

    Discharge, NPT 1-1/4

    Dimensions 9H x 7W

    sPeCIFICAtIons

    FeAtUres

    Pumps up to 19 GPM Extra durable for

    heavy-duty use Used for dewatering

    shallow flooded areas such as basements, window wells, rooftops, ponds and stock tanks

    1-1/4 NPT discharge

    15 three-prong power cord

    Includes 1 x 3/4 garden hose adapter

    Pumps standing water down to 1/8

    1-1/4 NPT x 1 NPT adapter Rated for continuous duty CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    20

    15

    10

    5

    0

    6

    4.5

    3

    1.5

    0

    0 15.1 30.2 49.2 71.9

    0 4 8 13 19

    DU25 1/4 HP

    PAGE 8

  • SUMP PUMPS

    M9007sse

    Applications basement sumps

    Capacities 50 GPM 189.3 LPM

    Shut-off head 18 5.5 m

    Operation: On Off

    12-13 3-4.5

    305-330 mm 76-144 mm

    Solids handling 1/8 3.18 mm

    Liquids handling drain water

    Liquid temp. 77 F 25 C

    Motor 1/3 HP

    Electrical data 1625 RPM, 115V, 3.5A, 1, 60Hz

    Acceptable pH range 6-9

    Shaft seal none

    Housing thermoplastic or cast iron

    Power cord 6, 16/3, SJT

    Discharge, NPT MCSP3: MCSP31:

    1-1/4 1-1/2

    31.8 mm 38.1 mm

    Min. sump diameter 12 304.8 mm

    MCSP Series1/3 HP Pedestal Sump Pumps

    sPeCIFICAtIons

    FeAtUres

    Ideal for basements needing frequent drainage

    Quick and easy installation Fits 12 diameter x 24

    deep or larger sump pits Available with

    corrosion-resistant thermoplastic or cast iron pump housing and base

    Built-in reliability, ease of operation

    Thermal overload protection to prevent motor overload

    Top-mounted adjustable float switch for easy accessibility

    Top-screened inlet to reduce clogging

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    20

    16

    12

    8

    4

    0

    6

    5

    4

    3

    2

    1

    0

    17015013011050 90703010

    0 5040302010

    MCSP

    PAGE 9

  • SUMP PUMPS

    M9008sse

    SP25 Series1/4 HP Residential Sump Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering

    Capacities 32 GPM 121 LPM

    Shut-off head 22 6.7 m

    Operation: On Off

    9.5 2.5

    241 mm 63 mm

    Solids handling 1/4 6.35 mm

    Liquids handling drain water

    Intermittent liquid temp up to 140F up to 60C

    Motor 1/4 HP

    Electrical data 115V, 6.5A, 1, 60Hz

    Acceptable pH range 6-9

    Shaft seal carbon/ceramic

    Housing cast iron

    Power cord 10, SJTW, SJTW-A

    Discharge, NPT 1-1/2 38.1 mm

    Min. sump diameter Wide Angle: Vertical:

    18 10

    457 mm 267 mm

    sPeCIFICAtIons

    FeAtUres

    Versatility for many light-duty jobs

    Designed for drain water removal or permanent applications with small amounts of debris

    Durable construction to deliver many years of reliable service

    Wide-angle or vertical mechanical switch

    Dual ball bearing Powerful permanent split

    capacitor run motor Built-in overload protection

    Cast iron housing for superior heat dissipation

    Non-clogging recessed impeller

    Long-life carbon/ ceramic seal

    Positive sealing, quick-disconnect power and switch cords make replacement simple

    10 power cord Energy-saving,

    low-amp motor CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    22

    20

    18

    16

    14

    12

    10

    8

    6

    4

    2

    00 5 10 15 20 25 30

    0 15 30 45 60 75 90 105 120

    7

    6

    5

    4

    3

    2

    1

    SP25A1 1/4 HP

    PAGE 10

  • S33 Series1/3 HP Submersible Sump Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering

    Capacities 32 GPM 121 LPM

    Shut-off head 25 7.62 m

    Operation: On Off

    10.31 3.31

    261 mm 84 mm

    Pump-down range 7 178 mm

    Solids handling 1/4 6.4 mm

    Liquids handling drain water

    Intermittent liquid temp up to 140F up to 60C

    Motor 1/3 HP, PSC

    Electrical data 3000 RPM, 115V, 6.5A, 1, 60Hz

    Acceptable pH range 6-9

    Shaft seal type 11A, carbon & ceramic, secondary lip seal

    Housing cast iron

    Power cord 10, 20

    Discharge, NPT 1-1/2 38.1 mm

    Min. sump diameter Float: Vertical:

    18 10-1/2

    457 mm 267 mm

    sPeCIFICAtIons

    FeAtUres

    Versatility for many light-duty jobs

    Designed for drain water removal or permanent applications with small amounts of debris

    Maintenance-free operation Wide-angle or vertical

    mechanical switch for small 10-1/2diameter sumps

    Dual ball-bearing motor and additional lip seal provide durability and longer pump life

    SUMP PUMPS

    M9009sse

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    25

    24

    22

    20

    18

    16

    14

    12

    10

    8

    6

    4

    2

    00 5 10 15 20 25 30

    0 15 30 45 60 75 90 105 120

    7

    6

    5

    4

    3

    2

    1

    S33 1/3 HP

    Durable PSC motor for years of service

    Oil-filled PSC motor for maximum heat dissipation, continuous bearing lubrication

    Recessed vortex impeller for free flow of liquids and solids

    Thermal overload protection with automatic reset

    CSA Listed

    PAGE 11

  • SUMP PUMPS

    M9010sse

    SSM331 Series1/3 HP Cast Iron Submersible Sump and Effluent Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering, light effluent

    Capacities 31 GPM 117 LPM

    Shut-off head 23 7 m

    Operation: On Off

    9.94 4.06

    252 mm 103 mm

    Solids handling 1/2 12.7 mm

    Liquids handling drainage effluent

    Intermittent liquid temp up to 140F up to 60C

    Motor 1/3 HP

    Electrical data Shaded pole, 115V, 9A, 1, 60Hz

    Acceptable pH range 5-9

    Shaft seal type 11A, carbon & ceramic

    Housing heavy cast iron

    Power cord 10 (3 m), 16/3, SJTW, SJTW-A

    Discharge, NPT 1-1/2

    Min. sump diameter 12 304.8 mm

    sPeCIFICAtIons

    FeAtUres

    Designed for light demanding drainage applications

    Removal of drainage water and light septic tank effluent

    Automatic and manual operation models available

    Maintenance-free operation Piggyback wide-angle or

    vertical mechanical switch Heavy-duty reliability

    Oil-filled motor for maximum heat dissipation, continuous bearing lubrication

    Recessed vortex impeller for free flow of liquids and solids

    Thermal overload protection with automatic reset

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    22

    20

    18

    16

    14

    12

    10

    8

    6

    4

    2

    00 5 10 15 20 25 30

    0 15 30 45 60 75 90 105 120

    7

    6

    5

    4

    3

    2

    1

    SSM331 1/3 HP

    PAGE 12

  • MDC33/MDC50 Series1/3 and 1/2 HP Cast Iron Submersible Sump Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering, light effluent, water transfer

    Capacities 62 GPM 234 LPM

    Shut-off head 32 9.75 m

    Operation: Manual Tethered models: On Off Vertical models: On Off

    12-1/2 3-1/2 6-1/2 2

    318 mm 89 mm 165 mm 51 mm

    Solids handling 1/2 12.7 mm

    Liquids handling drainage effluent

    Intermittent liquid temp 130F 54C

    Motor electrical data 1/3 HP, 9.8A; 1/2 HP, 12A; shaded pole w/thermal overload protection,115V, 1, 60Hz, 1550 RPM

    Acceptable pH range 6-9

    Shaft seal carbon & ceramic

    Housing heavy cast iron

    Power cord 10 (3 m) or 20 (6 m), 16/3, SJTW, SJTW-A

    Discharge, NPT 1-1/2

    Min. sump diameter Float: Vertical:

    14 10

    356 mm 254 mm

    sPeCIFICAtIons

    FeAtUres

    1/3 or 1/2 HP Rugged cast iron pump

    body and motor cover, exterior hardware stainless steel construction

    1-1/2 (38 mm) NPT discharge

    Carbon/ceramic shaft seal Piggyback-style float

    for automatic or manual operation

    Oil-filled motor with automatic reset overload provides safe operation

    Ball-bearing construction for long life

    Easily replaceable power cord with optional lengths available

    CSA Listed

    SUMP PUMPS

    M9011sse

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    40

    30

    20

    10

    0 20 8040 60

    200150100500 250

    10

    8

    6

    4

    2

    0

    MDC33 1/3 HP

    MDC50 1/2 HP

    PAGE 13

  • SUMP PUMPS

    M9180sse

    MCI033/MCI050 Series1/3 and 1/2 HP Cast Iron Submersible Sump Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering, light effluent, water transfer

    Capacities 62 GPM 235 LPM

    Shut-off head 32 9.8 m

    Operation: On Off

    9 4

    229 mm 102 mm

    Operation automatic

    Solids handling 1/2 12.7 mm

    Liquids handling drainage effluent

    Continuous liquid temp 130F 54C

    Motor electrical data 1/3 HP, 9.8A; 1/2 HP, 12A; shaded pole w/thermal overload protection, 115V, 1, 60Hz, 1550 RPM

    Acceptable pH range 6-9

    Shaft seal carbon & ceramic

    Housing/volute heavy cast iron

    Volute base fiberglass reinforced polypropylene

    Impeller fiberglass-reinforced Noryl with threaded brass insert

    Exterior hardware stainless steel

    Power cord 10 (3 m) or 20 (6 m), 16/3, SJTW-A, SJTW

    Discharge, NPT 1-1/2 38.1 mm

    Min. sump diameter 10 25.4 cm

    sPeCIFICAtIons

    FeAtUres

    2-pole switch design allows for operation in sump diameters of 10 or more

    Rugged, oil-cooled motor provides continuous bearing lubrication and maximizes heat dissipation

    Lubricated ball bearings and shaft seal for longer service life

    Shaded pole motor eliminates failure-prone switches and relays

    Long-life carbon/ceramic seal protects motor against water leakage

    Heat sensor overload protection with automatic reset when motor cools to safe operating temperature

    Anti-airlock hole in base reduces added labor

    Pump intake screen, volute base, switch and power cord are serviceable

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    35

    30

    25

    20

    15

    10

    5

    0

    10

    8

    6

    4

    2

    0

    250200150100500

    0 6040 7050302010

    MCI033 1/3 HP

    MCI050 1/2 HP

    PAGE 14

  • SX50 SeriesExplosion-Proof 1/2 HP Submersible Sump Pump and Control Panel Package

    sPeCIFICAtIonssPeCIFICAtIons

    Applications class 1, division 1, group D hazardous locations

    Capacities 95 GPM 360 LPM

    Shut-off head 34 10 m

    Operation: On/Off turns on/off with tethered switch hooked to control box

    Solids handling (SX50; SX50H) 2 / 3/4 50 mm / 19 mm

    Liquids handling domestic effluent & drain water

    Intermittent liquid temp up to 140F up to 60C

    Motorn electrical data 1/2 HP, 1750 RPM, 1 - capacitor start, 230V, 60Hz

    Acceptable pH range 6-9

    Winding insulation temp. (Class B)

    266F up to 120C

    Specific gravity .9-1.1

    Viscosity 28 35 SSU

    Discharge, NPT SX50: SX50H:

    2 1-1/2

    50 mm 38.1 mm

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    sPeCIFICAtIons

    FeAtUres

    Rugged, submersible, explosion-proof sump pumps for municipal, commercial and industrial use

    Constructed for use in Class 1, Division 1, Group D hazardous locations

    Designed to pump contaminated water, with a wide range of pollutants listed under the CSA listings

    Intrinsically safe control panel included

    Durable motor will deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and constant bearing lubrication

    Recessed impeller reduces radial bearing loads, increasing bearing life

    SUMP PUMPS

    M9015sse

    High-torque capacitor start, single-phase motor for assured starting under heavy load

    Seal leak probes warn of seal leak condition

    On-winding heat sensors protect motor from overheating and prevent costly motor damage

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    40

    35

    30

    25

    20

    15

    10

    5

    0

    12

    10

    8

    6

    4

    2

    00 10 20 30 40 50 60 70 80 90 100

    0 50 100 150 200 250 300 350

    SX50H

    SX50

    PAGE 15

  • SUMP PUMPS

    M9016sse

    DS Series1/3 through 3/4 HP Stainless Steel Sump Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering, utility

    Capacities 45 GPM 170.3 LPM

    Shut-off head 26 98.4 m

    Operation: On Off

    13 6.75

    330 mm 171 mm

    Solids handling 3/4 19 mm

    Liquids handling drain water

    Continuous liquid temp 104F 40C

    Motor electrical data 1/3 HP, 2.7A; 1/2 HP, 4.8A; 3/4 HP, 6.4A; 115V; 60Hz, PSC Motor, 3450 RPM

    Acceptable pH range 5-9

    Shaft seal dual lip with ceramic shaft seal

    Housing stainless steel

    Power cord 15, SJTW, 18/3

    Discharge, NPT 1-1/4

    Min. sump diameter 12

    sPeCIFICAtIons

    FeAtUres

    Used for dewatering from construction sites, ponds, pits, tanks and extracting water from foundations or flooded basements

    1/3 HP, 1/2 HP and 3/4 HP available

    PSC motor with self- lubricating ball-bearing construction

    Double lip seals with ceramic wear surface

    Passes 3/4 solids Piggyback-style float allows

    for manual operation Includes 1-1/4 NPT x 1-1/4

    NPT 90 discharge elbow, 1-1/4 NPT x 1-1/2 NPT adapter

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    30

    25

    20

    15

    10

    5

    0

    9

    7.6

    6

    4.5

    3

    1.5

    00 5 10 15 20 25 30 35 40 45 50

    0 19 38 57 76 95 114 133 152 170 190

    DS33 1/3 HP

    DS50 1/2 HP

    DS75 3/4 HP

    PAGE 16

  • PSB18221/4 HP Sump Basin Package

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement sumps, dewatering, new or existing installations

    Capacities 32 GPM 121 LPM

    Shut-off head 22 6.7 m

    Operation: On Off

    9.5 2.5

    241 mm 63 mm

    Solids handling 1/4 6.35 mm

    Liquids handling drain water

    Intermittent liquid temp up to 140F up to 60C

    Motor electrical data 1/4 HP, 115V, 1, 60Hz

    Shaft seal carbon & ceramic

    Housing cast iron

    Power cord 10, SJTW, SJTW-A

    Discharge, NPT 1-1/2 38.1 mm

    sPeCIFICAtIons

    SUMP PUMPS

    M9155sse

    FeAtUres

    1/4 HP Fully assembled check

    valve includes Injection-molded structural

    foam provides the highest quality construction for uniform wall thickness and strength

    Proprietary flush mount design for easy shipping and storage allows for pallet stacking for sump

    Basin Features: Radon proof radon

    approved basin and cover for radon prevention

    Injection-molded structural foam (polyethylene) 20-gallon capacity basin; standard 18 x 22 size

    Injection-molded structural foam (polyethylene) lid; gas-tight single-piece design with seal

    4 snap-in type hub adapter with stainless steel clamp; fits 4 DWV SCH. 40 plastic pipe

    1-1/2 NPT threaded discharge and 2 NPT vent flange (easily converts to 3); comes with gas-tight cord grommet

    Sump pump check valve fits 1-1/2 black, galvanized, and DWV SCH. 40 pipe

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    22

    20

    18

    16

    14

    12

    10

    8

    6

    4

    2

    00 5 10 15 20 25 30

    0 15 30 45 60 75 90 105 120

    7

    6

    5

    4

    3

    2

    1

    SP25A1 1/4 HP

    Pump Only

    PAGE 17

  • SUMP PUMPS

    M9017sse

    ED-251/4 HP Sink Pump System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications laundry trays, washing machines, wet bars, water softeners, dehumidifiers, etc.

    Capacities 32 GPM 121 LPM

    Shut-off head 22 6.7 m

    Operation: On Off

    9.5 2.5

    241 mm 63 mm

    Solids handling 1/4 6.35 mm

    Liquids handling drain water

    Intermittent liquid temp up to 140F up to 60C

    Motor electrical data 1/4 HP, 115V, 6.5A, 1, 60Hz

    Shaft seal carbon & ceramic

    Housing cast iron

    Power cord 10 (3 m), SJTW, SJTW-A

    Discharge, NPT 1-1/2

    Min. sump diameter 10 254 mm

    sPeCIFICAtIons

    FeAtUres

    Specially designed for many household jobs

    Pumps water from laundry trays, washing machines, wet bars, water softeners, dehumidifiers, etc.

    High-capacity 1/4 HP pump Oil-filled for maximum heat

    dissipation and constant lubrication

    Thermal overload protection with automatic reset

    Fully assembled Includes discharge

    pipe inside basin Installs above

    floor no need for sump

    Pump Only

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    22

    20

    18

    16

    14

    12

    10

    8

    6

    4

    2

    00 5 10 15 20 25 30

    0 15 30 45 60 75 90 105 120

    7

    6

    5

    4

    3

    2

    1

    ED25 1/4 HP

    PAGE 18

  • ED33 Series1/3 HP Sink Pump System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications laundry trays, wet bars, beautician or utility sinks, dehumidifier/air-conditioning units

    Capacities 48 GPM 182 LPM

    Shut-off head 24 7.3 m

    Operation: On Off

    6 1/2 2

    165 mm 50 mm

    Solids handling 1/2 12.7 mm

    Liquids handling drainage effluent

    Intermittent liquid temp 130F 54C

    Motor electrical data 1/3 HP, 115V, 9.8 FLA, 1, 60Hz

    Acceptable pH range 5-9

    Shaft seal carbon & ceramic

    Housing cast iron

    Power cord 10 (3 m), grounded SJTW, SJTW-A

    Discharge, NPT 1-1/2

    sPeCIFICAtIons

    FeAtUres

    1/3 HP Pre-packaged sink/pump

    system is ready for quick application

    Basin Features: High-impact engineered

    resin, exterior hardware and stainless steel construction

    1-1/2 (38 mm) NPT discharge

    Carbon/ceramic shaft seal Piggyback-style float for

    automatic or manual operation

    Oil-filled motor with automatic reset overload provides safe operation

    Octagonal shape, compact size, 6-gallon useable capacity

    Easily replaceable power cord with optional lengths available

    Molded reuseable PNC gasket lid seal

    Basin dimensions are 15-1/16 W x 13 3/8 H (11-9/16 from floor to center of inlet)

    SUMP PUMPS

    M9018sse

    Pump Only

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    25

    20

    15

    10

    5

    0 10 20 30 40 50

    1000 5025 12575 150 175

    7

    6

    5

    4

    3

    2

    1

    0

    ED33 1/3 HP

    PAGE 19

  • BATTERY BACK-UP SUMP PUMPS

    M9019sse

    MBSP12 Volt Battery Standby Pump System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications emergency dewatering

    Capacities 30 GPM 114 LPM

    Shut-off head 16 4.88 m

    Liquids handling sump drain water

    Intermittent liquid temp up to 77F up to 25C

    Motor 12V DC, 9A

    Charger plug-in type wall-mounted transformer; input - 120V AC, 60Hz, 15W; output - 12V AC, 60Hz, 2A

    Check valve dual check valves provided

    Housing thermoplastic

    sPeCIFICAtIons

    FeAtUres

    Protects home if AC-powered pump fails

    Backs up residential sump pump automatically during power outage or pump failure (primary pump and piping not included)

    Reliable operation Continuous

    self-charging system Solid-state controller

    monitors battery charge and pump operation

    Alarm sounds when standby pump activates

    Controller includes connectors for pump, charger, float switch and battery*

    Area light lights up dark, powerless work area

    Works with flooded and sealed AGM deep cycle lead-acid battery

    Re-settable circuit breaker eliminates the need for a fuse

    2A 5-stage charger

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    0 105

    70 90 110 130

    15 20 25 30 35

    16

    14

    12

    10

    8

    6

    4

    2

    0

    503010

    4.5

    3.5

    2.5

    1.5

    .5

    MBSP 12V DC

    * Deep cycle marine-type battery (Group 24) recommended not included with MBSP system

    PAGE 20

  • BATTERY BACK-UP SUMP PUMPS

    MBSP-Plus Series12 Volt Battery Standby Pump System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications emergency dewatering

    Capacities 2700 GPH 10,220 LPH

    Shut-off head 18

    Liquids handling sump drain water

    Continuous liquid temp up to 77F up to 25C

    Motor 12V DC, 18A

    Charger fully automatic, computerized monitoring, control and alarm system; input - 115V AC, 60Hz; output - 12V AC, 8A (5 stages)

    Check valve included

    Housing thermoplastic

    sPeCIFICAtIons

    M9020sse

    20

    15

    10

    5

    0 2512.5 37.5 50

    50 100 15025 75 125 1756

    5

    4

    3

    2

    1

    0

    0

    MBSP-PLUS

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    FeAtUres

    2700 GPH (10,220 LPH), 8A 5-stage charging system

    Thermoplastic pump with steel case charger enclosure

    1-1/4 (32 mm) NPT threaded discharge; adapts to 1-1/4 (32 mm) and 1-1/2 (38 mm) NPT

    High volume ideal for active sump pits

    8A multi-stage charging system (UL/CUL approved) with steel enclosure provides the strongest battery charge

    Plug-in style connectors for quick and easy installation

    Audio and visual alarms keep you informed of status at all times

    Check valve and battery case included

    Fits most new and existing sump pits

    PAGE 21

  • EFFLUENT PUMPS

    M9013sse

    S40HTHigh Temperature 1/3 HP Effluent Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications boiler blow-down pits, condensate pits, hot water sumps

    Shut-off head 21 6.4 m

    Capacities 45 GPM 170 LPM

    Operation (S40HT-11P): On Off

    13.5 4.5

    343 mm 114 mm

    Operation manual or automatic

    Solids handling 3/4 19 mm

    Liquids handling high temperature liquids

    Intermittent liquid temp. S40HT-11P S40HT-11

    up to 194F up to 200F

    up to 90C up to 93C

    Motor electrical data 1/3 HP, oil-filled, thermal overload protection, 115V, 12A, 1, 60Hz, 1550 RPM

    Acceptable pH range 6-9

    Housing/volute case cast iron

    Impeller cast iron

    Exterior hardware stainless steel

    sPeCIFICAtIons

    FeAtUres

    All cast-iron housing, volute case, and impeller resists the most extreme corrosive environments

    Rugged-built, oil-filled motor for continuous bearing lubrication and maximum heat dissipation

    Heat sensor overload protection with automatic reset when motor cools to a safe operating temperature

    Lower ball bearing eliminates sleeve bearing wear and reduces motor wear

    Non-clog vortex style impeller, ejector vanes for seal protection

    Stainless steel hardware allows easy disassembly after extended service

    Oil and water resistant cord design prevents oil loss from and moisture protection for motor

    Bearings and mechanical seal are permanently lubricated for long life

    Easy to service heavy-duty lift-out ring

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    24

    20

    16

    12

    8

    4

    0

    7

    6

    5

    4

    3

    2

    1

    1750 15025 100 12550 75

    0 10 20 30 40 50

    PERFORMANCE@ 70F WATERTEMPERATURE

    PERFORMANCE@ 194F WATER

    TEMPERATURE

    S40HT

    Mechanical seal type 7A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts

    Bearings lower ball, upper sleeve type, oil lubricated

    Power cord 20, 16/3, SJOOW-A/SJOW

    DIscharge, NPT 1-1/2 38.1 mm

    Min. sump diameter Simplex: Duplex:

    18 30

    45.7 mm 76.2 mm

    PAGE 22

  • EFFLUENT PUMPS

    S50HT Series1/2 HP High Capacity Submersible Effluent Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications high-capacity sump, effluent, boiler blow-down

    Capacities 100 GPM 378 LPM

    Shut-off head 50 15.2 m

    Max. spherical solids 3/4 19 mm

    Liquids handling domestic effluent and drain water

    Max. liquid temp. 200F 93CMotor electrical data 1/2 HP, 3450 RPM, PSC

    with thermal overload, 115V, 12 FLA, 1, 60Hz

    Acceptable pH range 5-9

    Specific gravity .91.1

    Viscosity 2835 SSU

    Discharge, NPT 2 50.8 mm

    Housing cast iron

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    Power cord 20, 16/4, SOOW, SOOW-A

    sPeCIFICAtIons

    M9014sse

    FeAtUres

    1/2 HP Class 30 cast iron

    construction 2 (50.8 mm)

    NPT discharge Silicon carbide shaft seals Oil-filled motor with

    automatic reset overload provides safe operation

    Ball-bearing construction for long life

    600V jacketed lead for added durability

    Easily replaceable power cord with optional lengths available

    CSA Listed

    Mechanical seal type 7A or equal, Buna-N elastomers, carbon and ceramic sealing faces, stainless steel metal parts

    Bearings lower ball, upper sleeve type, oil lubricated

    Power cord 20, 16/3, SJOOW-A/SJOW

    DIscharge, NPT 1-1/2 38.1 mm

    Min. sump diameter Simplex: Duplex:

    18 30

    45.7 mm 76.2 mm

    0 6030 90 120

    0 100 200 300 400

    16

    12

    8

    4

    0

    60

    45

    30

    15

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    S50 HT 1/2 HP PERFORMANCE@200F WATER

    TEMPERATURE

    S50 HT 1/2 HP PERFORMANCE@70F WATER TEMPERATURE

    PW217-280 Control Panel Required

    (sold separately)

    PAGE 23

  • EFFLUENT PUMPS

    M9021sse

    ME3 Series1/3 HP High Head (ME3H) and High Flow (ME3F) Submersible Effluent Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications effluent removal, sump drainage, water transfer, flood control

    Capacities ME3H: ME3F:

    36 GPM 66 GPM

    136 LPM 249 LPM

    Shut-off head ME3H: ME3F:

    35 31

    10.7 m 9.5 m

    Max. spherical solids 3/4 19 mm

    Liquids handling domestic effluent and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/3 HP, 1550 RPM, shaded pole,

    oil-filled, 115V, 12A, 1, 60Hz, 230V, 6A, 1, 60Hz

    Acceptable pH range 6-9

    Specific gravity .91.1

    Viscosity 28 35 SSU

    Discharge, NPT 1-1/2 38.1 mm

    Housing heavy cast iron

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    Power cord 20, 16/3, SJTW

    sPeCIFICAtIons

    FeAtUres

    Durable motor delivers years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Overload protected, shaded pole motor eliminates starting switches and relays which are prone to fail

    Heavy cast iron motor housing and volute case dissipate heat, allow motor to run cooler for extended life

    Engineered for maintenance-free operation

    Field-tested, wide-angle, mercury-free mechanical float switch for maximum drawdown (automatic piggyback models only)

    Automatic pump models can be operated manually by unplugging piggyback switch and plugging pump directly into outlet

    Passes full 3/4 solids

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    40

    35

    30

    25

    20

    15

    10

    5

    0

    12

    10

    8

    6

    4

    2

    0

    0 50 100 150 200 250 300 350

    0 10 20 30 40 50 60 70 80 90 100

    ME3F 1/3 HP

    ME3H 1/3 HP

    ME3F

    ME3H

    PAGE 24

  • EFFLUENT PUMPS

    ME40 Series 4/10 HP Effluent and Drain Water Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications effluent removal, sump drainage, water transfer, flood control

    Capacities 80 GPM 303 LPM

    Shut-off head 32 9.75 m

    Max. spherical solids 3/4 19 mm

    Liquids handling domestic effluent and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 4/10 HP: 1650 RPM, PSC,

    oil-filled; 115V, 12A, 1, 60Hz; 230V, 6A, 1, 60Hz

    Acceptable pH range 5-9

    Specific gravity .91.1

    Viscosity 2835 SSU

    Discharge, NPT 1-1/2 38.1 mm

    Housing cast iron

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    Power cord 20, 16/3, SJTW

    sPeCIFICAtIons

    M9022sse

    FeAtUres

    Two-vane cast iron impeller design provides maximum dosing efficiency

    Enclosed design for high- efficiency pumping

    Eliminates possibility of jamming between impeller and volute

    Passes full 3/4 solids Durable motor will

    deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Positive sealing, quick- connect float and switch cords make replacement simple if service is ever necessary

    Field-tested, wide-angle, mercury-free mechanical float switch provides maximum drawdown (automatic models only)

    Lower ball bearing and heavy-duty, type 6 seal for added pump life

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    40

    35

    30

    25

    20

    15

    10

    5

    0

    12

    10

    8

    6

    4

    2

    0

    0 50 100 150 200 250 300 350

    0 10 20 30 40 50 60 70 80 90 100

    ME40 4/10 HP

    NEW! noW WItH CAST IRON IMPELLER For Added dUrABILItY

    PAGE 25

  • EFFLUENT PUMPS

    M9185sse

    ME45 Series1/2 HP Effluent and Drain Water Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications effluent removal, sump drainage, water transfer, flood control

    Capacities 87 GPM 329 LPM

    Shut-off head 44 13.41 m

    Max. spherical solids 3/4 19 mm

    Liquids handling domestic effluent and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2 HP: 3450 RPM, PSC,

    oil-filled; 115V, 8.6A, 1, 60Hz; 230V, 4.3A, 1, 60Hz

    Acceptable pH range 5-9

    Specific gravity .91.1

    Viscosity 28 35 SSU

    Discharge, NPT ME40: ME45:

    1-1/2 2

    38.1 mm 50.8 mm

    Housing cast iron

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    Power cord 20, 16/3, SJTW

    sPeCIFICAtIons

    FeAtUres

    Two-vane cast iron impeller design provides maximum dosing efficiency

    Enclosed design for high- efficiency pumping

    Eliminates possibility of jamming between impeller and volute

    Passes full 3/4 solids Durable motor will deliver

    many years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Positive sealing, quick- connect float and switch cords make replacement simple if service is ever necessary

    Field-tested, wide-angle, mercury-free mechanical float switch provides maximum drawdown (automatic models only)

    Lower ball bearing and heavy-duty, type 6 seal for added pump life

    CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    50

    40

    30

    20

    10

    0

    15

    12

    9

    6

    3

    0

    0 50 100 150 200 250 300 350

    0 10 20 30 40 50 60 70 80 90 100

    ME45 1/2 HP

    PAGE 26

  • EFFLUENT PUMPS

    ME Series1/2 through 1-1/2 HP Effluent Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications effluent removal, sump drainage, water transfer, flood control

    Capacities 120 GPM 454 LPM

    Shut-off head 95 28.9 mm

    Max. spherical solids 3/4 19 mm

    Liquids handling domestic effluent and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2 HP, 115V, 1, 1/2 to

    1-1/2 HP, 230V, 1, 208/230/ 460/575V, 3, oil-filled, permanent split capacitor type, 1, 3450 RPM, 60Hz

    Acceptable pH range 6-9

    Specific gravity .91.1

    Viscosity 2835 SSU

    Discharge, NPT 2 50.8 mm

    Housing cast iron

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    Power cord 10

    sPeCIFICAtIons

    M9023sse

    FeAtUres

    Ideal for use in mound and trench pressure distribution systems

    High-efficiency, two-vane, enclosed impeller provides ideal performance for efficient dosing

    Impeller passes full 3/4 solids

    Enclosed impeller design eliminates the possibility of jamming or corrosion between impeller and volute

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    100

    90

    80

    70

    60

    50

    40

    30

    20

    10

    0

    28

    24

    20

    16

    12

    8

    4

    0

    0 50 100 150 200 250 300 350 400 450

    0 10 20 30 40 50 60 70 80 90 100 110 120 130

    ME150 1-1/2 HPME100 1 HPME75 3/4 HPME50 1/2 HP

    Durable motor will deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and constant bearing lubrication

    High-torque, permanent split capacitor (PSC), single- phase motors; no starting switches or relays to wear out

    Optional seal leak probe warns of seal leak condition (dual seal motors only); helps prevent costly motor damage

    Motors have a winding current and temperature- sensitive overload (single phase only)

    Volute seal ring is replace-able; restores pump to original performance if wear should occur

    Motor is held in place by 4 screws; easily removed if service is ever needed

    CSA Listed

    PAGE 27

  • EFFLUENT PUMPS

    M9024sse

    P50/P100 Series1/2 and 1 HP Effluent ST.E.P. Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications effluent removal, sump drainage, water transfer, flood control

    Capacities 60 GPM 227 LPM

    Shut-off head 124 37.8 m

    Max. spherical solids 3/4 19 mm

    Liquids handling domestic effluent and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2 HP, 115V or 230V, 1;

    1 HP, 230V, 1, oil-filled, permanent split capacitor type, 3450 RPM, 60Hz

    Acceptable pH range 6-9

    Specific gravity .91.1

    Viscosity 28 35 SSU

    Discharge, NPT 1-1/2 38.1 mm

    Housing cast iron

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 mm 91.4 mm

    Power cord 20, 14/3 SJOW, SJOW-A

    sPeCIFICAtIons140

    120

    100

    80

    60

    40

    20

    0

    40

    36

    32

    28

    24

    20

    16

    12

    8

    4

    00 5 10 15 20 25 30 35 40 45 50 55 60

    25 50 75 100 125 150 175 200 225

    P51 & P52 1/2 HP

    P102 1 HP

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    FeAtUres

    P Series effluent pumps are designed for years of maintenance-free operation

    Single-vane, enclosed impeller provides steep, non-overloading performance curve for pressure collection and ST.E.P. systems; out-performs most pumps in its class

    Enclosed impeller eliminates the possibility of jamming or corrosion between impeller and volute

    Passes 3/4 spherical solids Durable motor will

    deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    High-torque, permanent split capacitor (PSC), single-phase motors; no starting switches or relays to wear out

    Double tandem seal configuration for extra motor protection, tough effluent pumping applications

    Optional seal leak probes warn of seal leak condition; helps prevent costly motor damage

    On-winding current and temperature-sensitive overload to protect against costly burnout

    Volute seal ring is replaceable; restores pump to original performance if wear should occur

    Motor is held in place by 4 screws; easily removed if service is ever needed

    CSA Listed

    PAGE 28

  • EFFLUENT PUMPS

    MD Series1/2 HP On-site Effluent Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications on-site filtered effluent, cistern

    Capacities 2 35 GPM 7.6 132.5 LPM

    Shut-off head 75225 22.9 68.6 m

    Max. spherical solids .080 2.0 mm

    Liquids handling filtered effluent

    Max liquid temp. 86F 30CMotor electrical data Dry-wound, double ball bearing,

    double-seal, thermal overload protected, 115V, 1, 60Hz

    Specific gravity .91.1

    Viscosity 2835 SSU

    Discharge, NPT 1-1/4

    Housing stainless steel and composite

    Power cord 10 30 m

    300V, 2-wire with ground, SJTW-A, SJTW

    sPeCIFICAtIons

    M9026 sse

    FeAtUres

    1/2 HP, 115V, single-phase Superior drawdown

    capability to 4-1/2 (114 mm) vs. 13-1/2 (343 mm) on a standard NEMA 4

    25% reduced amp-draw 9.5A vs. 12.7A on a standard NEMA 4

    Cooler and quieter operation eliminates expensive flow-inducer sleeves

    Stainless steel and composite construction

    Exclusive dry-run capability Enclosed and self-lubricated

    shaft-bearing resists wear from abrasives

    Heavy 7/16 (12 mm) positive drive 300 Series stainless steel hexagonal shaft

    Serviceable composite intake screen allows for 0.80 solids

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    0 15

    300

    225

    150

    75

    30 45 60

    0 100

    80

    60

    40

    20

    0

    25 50 75 200

    30 GPM 1/2 HP

    10 GPM 1/2 HP

    20 GPM 1/2 HP

    PAGE 29

  • EFFLUENT PUMPS

    M9027sse

    2NFL and J-BE Series1/2 through 1-1/2 HP High Head Filtered Effluent Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications on-site filtered effluent

    Capacities 50 GPM 189 LPM

    Shut-off head 480 146.30 m

    Max. spherical solids 1/16 1.6 mm

    Liquids handling filtered effluent

    Max liquid temp. 122F 68CMotor electrical data 1/2 HP, 115V, 1, 1/2 to 1-1/2 HP,

    230V, 1, 60Hz, 3450 RPMSpecific gravity .91.1

    Viscosity 28 35 SSU

    Discharge NPT 8, 12, and 20 GPM: 25 and 35 GPM:

    1-1/4 2

    31.8 mm 50.8 mm

    Housing stainless steel

    Power cord 10, 30, 50 or 100, jacketed, 14/3, SOOW

    sPeCIFICAtIons

    FeAtUres

    Cost-effective wastewater systems High-pressure capacity Corrosion-resistant design for long life Dependable field proven motor Stainless steel construction Built-in overload protection Replaceable 10, 30, 50 or 100 jacketed power cord Hermetically sealed windings Continuous-duty rating Frequent cycling capabilities Powerful, yet lightweight Easy handling and installation

    2NFL J-BE

    (Performance charts on following page)

    PAGE 30

  • EFFLUENT PUMPS

    2NFL and J-BE Performance

    M9027sse

    500

    400

    300

    200

    100

    0

    CAPACITY LITERS PER MINUTE

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN F

    EET

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    150

    120

    90

    60

    30

    3/4 HP

    1/2 HP

    1 HP

    0 2 4 6 8 10 12 14 16 18 20

    8 15 23 30 38 45 53 60 68 75

    8 GPM 2NFL

    500

    400

    300

    200

    100

    0

    CAPACITY LITERS PER MINUTE

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN F

    EET

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    150

    120

    90

    60

    30

    3/4 HP

    1 HP

    0 2 4 6 8 10 12 14 16 18 20

    8 15 23 30 38 45 53 60 68 75

    1/2 HP

    12 GPM 2NFL

    0 3 6 9 12 15 18 21 24 27 30

    11 23 34 45 57 68 80 91 102 114

    1-1/2 HP

    1 HP

    3/4 HP

    1/2 HP

    500

    400

    300

    200

    100

    0

    CAPACITY LITERS PER MINUTE

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN F

    EET

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    150

    120

    90

    60

    30

    20 GPM 2NFL

    0 5 10 15 20 25 30 35 40 45 50

    19 38 57 76 95 114 133 151 170 189

    1-1/2 HP

    1/2 HP

    1 HP

    500

    400

    300

    200

    100

    0

    CAPACITY LITERS PER MINUTE

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN F

    EET

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    150

    120

    90

    60

    30

    25 GPM J-BE

    0 5 10 15 20 25 30 35 40 45 50

    19 38 57 76 95 114 133 151 170 189

    CAPACITY LITERS PER MINUTE

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN F

    EET

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    250

    200

    150

    100

    50

    0

    75

    60

    45

    30

    15

    1 HP

    1-1/2 HP

    35 GPM J-BE

    PAGE 31

  • EFFLUENT PUMPS

    M9028sse

    DE Series 4/10 and 1/2 HP Stainless Steel Continuous Duty Effluent Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications residential and commercial applications

    Capacities 97 GPM 367 LPM

    Shut-off head 36 11 m

    Max. spherical solids 1-1/2 38 mm

    Liquids handling domestic effluent and drain water

    Continuous liquid temp. 130F 54CMotor electrical data 4/101/2 HP, 115V; 4/10 HP,

    10.5A; 1/2 HP, 12A; 60Hz

    Acceptable pH range 5-9

    Specific gravity .91.1

    Viscosity 28 35 SSU

    Discharge NPT 2 50 mm

    Housing stainless steel

    Min. sump diameter Simplex: Duplex:

    18 24

    46 mm 60 mm

    Power cord 20, SJOW, 16 AWG

    sPeCIFICAtIons

    FeAtUres

    Pumps up to 97 GPM (1/2 HP) and 92 GPM (4/10 HP) Designed to quickly clear water or effluent PSC motor with self-lubricating ball-bearing construction Ideal for residential and commercial applications Tethered float switch Double-lip seal with ceramic wear surface Suitable for continuous use Includes 90 discharge elbow CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    0 25 50 75 100

    0 375 18

    15

    12

    9

    6

    3

    0

    30075 150 225

    DE50 1/2 HPDE40 4/10 HP

    0

    15

    30

    45

    60

    PAGE 32

  • SRM4 4/10 HP Sewage Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 95 GPM 360 LPM

    Shut-off head 19 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling septic effluent and sewage

    Intermittent liquid temp up to 140F up to 60CMotor electrical data 4/10 HP, PSC, 115V, 12A, 1, 60Hz

    Acceptable pH range 5-9

    Discharge, NPT 2 50.8 mm

    Housing heavy cast iron

    Power cord 10 (20 optional)

    Impeller recessed, thermoplastic

    Volute case cast iron

    Shaft seal type 11A, carbon & ceramic

    sPeCIFICAtIons

    M9029sse

    FeAtUres

    Power for versatile applications Residential septic tank sewage Large sumps Long-lasting performance Oil-filled motor for maximum heat dissipation

    and continuous bearing lubrication Recessed vortex impeller for free flow of liquids,

    solids up to 2 diameter Rotary shaft seal has carbon and ceramic faces

    for positive seal Thermal overload protection with automatic reset CSA Listed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    24

    20

    16

    12

    8

    4

    00 10 20 30 40 50 60 70 80 90

    7

    6

    5

    4

    3

    2

    1

    40 80 120 160 200 240 280 320 360

    SRM4 4/10 HP

    SEWAGE PUMPS

    PAGE 33

  • SEWAGE PUMPS

    M9030sse

    CMV51/2 HP Residential Sewage Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 95 GPM 360 LPM

    Shut-off head 18 shut-off: 19 shut-off:

    5.5 m 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling raw sewage, effluent and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2 HP, PSC, 1625 RPM, 115V,

    12A, 1, 60HzAcceptable pH range 6-9

    Discharge NPT 2 50.8 mm

    Housing cast iron

    Power cord 20, 16/3, SJTW

    Impeller recessed, thermoplastic

    Volute case thermoplastic

    Shaft seal type 11A, carbon & ceramic

    Min. sump diameter Simplex: Duplex:

    18 30

    457 mm 762 mm

    sPeCIFICAtIons

    FeAtUres

    Engineered for many years of maintenance-free operation

    Wide-angle, mercury-free mechanical float switch for maximum drawdown

    Recessed vortex impeller operates completely out of volute and provides free flow through passage for solids and liquids

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    20

    15

    10

    5

    0

    6

    5

    4

    3

    2

    1

    0

    0 50 100 150 200 250 300 350

    0 10 20 30 40 50 60 70 80 90 100

    CMV5 1/2 HP

    Durable motor will deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Recessed vortex impeller provides minimal radial loading for long bearing life

    CSA Listed

    PAGE 34

  • SEWAGE PUMPS

    MW501/2 HP Residential and Light Commercial Sewage Pump

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 135 GPM 510 LPM

    Shut-off head 27 8.23 m

    Solids handling 2 50.8 mm

    Liquids handling domestic sewage & drain water

    Intermittent liquid temp up to 140F up to 60CMotor electrical data 1/2 HP, 1625 RPM, PSC (1),

    oil-filled, 115V, 9A, 1, 60Hz; 230V, 4.5A, 1, 60Hz

    Acceptable pH range 5-9

    Discharge, NPT 2 50.8 mm

    Housing class 30 cast iron

    Power cord 20, 16/3, SJTW

    Impeller thermoplastic

    Volute case cast iron

    Shaft seal type 6, carbon & ceramic

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 cm 91.4 cm

    sPeCIFICAtIons

    M9031sse

    FeAtUres

    Two-vane impeller design provides maximum pump efficiency

    Enclosed design for high-efficiency pumping

    Eliminates possibility of jamming between impeller and volute

    Passes full 2 solids Original performance can

    be restored if wear occurs by replacing volute seal ring

    Low-amp draw from the efficient PSC motor means less heat build-up

    CSA Listed

    Durable motor will deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    High-torque, permanent split capacitor (PSC) motors; no starting switches or relays to wear out

    Field-tested, wide-angle, mercury-free piggyback mechanical float switch provides maximum drawdown (automatic models only)

    Long, flexible type 6 seal provides high-pressure sealing with improved seal face protection by location

    Lower ball bearing eliminates sleeve bearing wear and significantly reduces motor wear

    30

    25

    20

    15

    10

    5

    00 20 40 60 80 100 120 140

    10

    8

    6

    4

    2

    0

    0 100 200 300 400 500

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    MW50 1/2 HP

    PAGE 35

  • SEWAGE PUMPS

    M9032sse

    MW Series 2" Solids Handling Heavy-Duty Residential and Commercial Sewage Pumps Available with Single or Double Seals

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 165 GPM 624 LPM

    Shut-off head 70 21.3 m

    Solids handling 2 50.8 mm

    Liquids handling domestic sewage & drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2 to 2 HP, 208/230V, 1;

    208/230/460/575V, 3, oil-filled, permanent split, capacitor type, 1, 3450 RPM, 60Hz

    Acceptable pH range 5-9

    Discharge, NPT 2 50.8 mm

    Housing cast iron

    Power cord 10

    Impeller ductile iron

    Volute case class 30 cast iron

    Shaft seal type 21, carbon & ceramic

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 cm 91.4 cm

    sPeCIFICAtIons

    FeAtUres

    High head performance for demanding applications

    High-efficiency, two-vane, enclosed impeller for high- efficiency pumping

    Eliminates possibility of jamming between impeller and volute

    Original performance can be restored if wear occurs by replacing volute seal ring

    Durable motor will deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    High-torque, permanent split capacitor (PSC) single-phase motors; no starting switches or relays to wear out

    CSA Listed

    80

    70

    60

    50

    40

    30

    20

    10

    0

    20

    15

    10

    5

    00 20 40 60 80 100 120 140 160 180

    0 100 200 300 400 500 600

    MWH50 1/2 HP

    MW200 2 HP MW150 1-1/2 HP

    MW100 1 HP

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    PAGE 36

  • SEWAGE PUMPS

    WHR Series 2" Solids Handling Heavy-Duty Residential and Commercial Sewage Pumps Available with Single or Double Seals

    sPeCIFICAtIonssPeCIFICAtIons

    Applications domestic wastewater and septic systems

    Capacities 178 GPM 673.8 LPM

    Shut-off head 33 10.1 m

    Solids handling 2 50.8 mm

    Liquids handling drain water and domestic sewage

    Intermittent liquid temp up to 140F up to 60CMotor electrical data 1/2 HP, 115V, 1, 60Hz, PSC;

    1/2, 3/4, 1 HP, 230V, 1, 60 Hz PSC; 200/230/460/575V, 3, 60Hz

    Acceptable pH range 5-9

    Discharge, NPT 2 3

    50.8 mm 76.2 mm

    Housing cast iron

    Power cord WHRSJOW/SJOW-A 20, 16/3, 1; 20, 16/4, 3 WHR-DS 20, 14/4, 1 20, 14/3, 1, L/D; 20, 16/4, 3, L/D

    Impeller cast iron, vortex

    Volute case cast iron

    Shaft seal single type 21, carbon/ceramic, double tandem carbon/ceramic

    Min. sump diameter Simplex: Duplex:

    24 30

    61.0 cm 76.0 cm

    sPeCIFICAtIons

    M9033sse

    FeAtUres

    Power range meets many applications

    Domestic wastewater and septic systems

    Light commercial sewage High-capacity fluid transfer Durable motor for

    long-lasting performance 1/2, 3/4 and 1 HP models

    Oil-filled for cooler operation and constant bearing lubrication

    Single-phase PSC motors eliminate starting switches

    Recessed impeller increases bearing life

    Thermal overload protection with automatic reset

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    32

    28

    24

    20

    16

    12

    8

    4

    0

    9.6

    8.4

    7.2

    6.0

    4.8

    3.6

    2.4

    1.2

    0 20 40 60 80 100 120 140 160 180

    76 152 228 304 380 456 532 608 684

    WHR10 1 HP & WHR10-DS WHR7 3/4 HP & WHR7-DS WHR5 1/2 HP & WHR5-DS

    Double seal models with seal leak detector are not CSA Listed

    PAGE 37

  • SEWAGE PUMPS

    M9034sse

    WHR5H-WHR20H Series2" Solids Handling Residential and Commercial Sewage and Effluent Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications domestic wastewater and septic systems

    Capacities 218 GPM 825 LPM

    Shut-off head 70 20.9 m

    Solids handling 2 50.8 mm

    Liquids handling raw sewage and sewage effluent

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2, 1, 1-1/2 & 2 HP, 3450 RPM,

    200/230V, 1, 60 Hz, PSC; 200/230/460V, 3, 60Hz

    Acceptable pH range 6-9

    Discharge NPT 2 3

    50.8 mm 76.2 mm

    Housing cast iron

    Power cord 20, 16/3, SJOW/SJOW-A, 1 20, 16/4, SJOW/SJOW-A, 3

    Impeller ductile iron, vortex

    Volute case cast iron

    Shaft seal type 21, carbon & ceramic

    Min. sump diameter Simplex: Duplex:

    24 30

    61.0 cm 76.0 cm

    sPeCIFICAtIons

    FeAtUres

    Higher heads for demanding applications

    Domestic wastewater and septic systems

    Light commercial sewage High-capacity fluid transfer Durable motor for

    long-lasting performance 1/2, 1, 1-1/2

    and 2 HP models

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    70

    60

    50

    40

    30

    20

    10

    0

    20

    15

    10

    5

    0 20 40 60 80 100 120 140 160 180 200 220 240

    100 200 300 400 500 600 700 800 900

    WHR5H 1/2 HP

    WHR10H 1 HP

    WHR15H 1-1/2 HP

    WHR20H 2 HP

    Oil-filled for cooler operation and constant bearing lubrication

    Single-phase PSC motors eliminate starting switches

    Recessed impeller reduces radial loads and increases bearing life

    Thermal overload protection with automatic reset

    CSA Listed

    PAGE 38

  • SEWAGE PUMPS

    DSW Series 2" Solids Handling Continuous Duty Stainless Steel Sewage Pumps

    sPeCIFICAtIonssPeCIFICAtIons

    Applications domestic wastewater and septic systems

    Capacities 145 GPM 549 LPM

    Shut-off head 42 12.8 m

    Solids handling 2 50.8 mm

    Liquids handling sewage, wastewater, effluent

    Continuous liquid temp 130F 54CMotor electrical data 4/10 HP, 1/2 HP, 115V

    1/2 HP, 1 HP, 230V 1 HP, 460V, 3

    Acceptable pH range 5-9

    Discharge, NPT 2 w/90 elbow

    Housing stainless steel

    Power cord 20', SJOW, 16 AWG

    Impeller stainless steel

    Volute case stainless steel

    Shaft seal mechanical carbon & ceramic

    sPeCIFICAtIons

    M9035sse

    FeAtUres

    Pumps up to 145 GPM (1 HP), 114 GPM (1/2 HP) and 103 GPM (4/10 HP)

    Designed for reliable pumping of wastewater

    Stainless steel, corrosion-resistant shaft and hardware

    Oil-cooled and lubricated, continuous-duty PSC motors

    Silicon carbide or carbon ceramic mechanical seals

    Tethered float switches feature piggyback controls

    20 power cord Suitable for continuous use Includes 90

    discharge elbow CSA Listed

    0 75.7 151.4 227.1 302.8 378.5 454.2 529.9 605.6

    0 20 40 60 80 100 120 140 160

    DSW100 1 HP 460/3DSW100 1 HP 230V

    DSW50 1/2 HP 230V DSW50 1/2 HP 115V

    DSW40 4/10 HP 115V

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    45

    40

    35

    30

    25

    20

    15

    10

    5

    0

    13.7

    12

    10.6

    9

    7.6

    6

    4.5

    3

    1.5

    0

    PAGE 39

  • SEWAGE PUMPS

    M9036sse

    SR1830 4/10 HP Packaged Simplex Sewage System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications residential septic tank sewage and large sumps

    Capacities 95 GPM 360 LPM

    Shut-off head 19 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling septic effluent and sewage

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 4/10 HP, shaded pole,

    115V, 12A, 1, 60HzAcceptable pH range 5-9

    Discharge NPT 2 50.8 mm

    Housing heavy cast iron

    Power cord 10 (20 optional)

    Impeller recessed, thermoplastic

    Volute case cast iron

    Shaft seal type 11A, carbon & ceramic

    sPeCIFICAtIons

    FeAtUres

    Complete package for versatile applications

    Residential septic tank sewage

    Large sumps High-quality system

    includes SRM4AIC sewage pump

    4/10 HP, 115V, 12A, 1, 60Hz motor

    2 diameter discharge Oil-filled motor for

    max imum heat dissipation and continuous bearing lubrication

    Recessed vortex impeller for free flow of solids up to 2 diameter

    Rotary shaft seal has carbon and ceramic faces for positive seal

    Thermal overload protection with automatic reset

    CSA ListedBasin: 18 x 30 structural

    foam construction 30-gallon capacity 4 plastic slip type

    or cast iron inlet hub

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    24

    20

    16

    12

    8

    4

    00 10 20 30 40 50 60 70 80 90

    7

    6

    5

    4

    3

    2

    1

    40 80 120 160 200 240 280 320 360

    SRM4 4/10 HP

    Sealed Cover: 18 solid structural foam

    cover with 2 discharge flange, vent flange suitable for 2 or 3 vent, or split steel with 2 or 3 vent

    Check Valve: 2 full swingFully Assembled: Includes discharge pipe

    inside basin Available in IAPMO

    approved models

    Pump Only

    PAGE 40

  • SEWAGE PUMPS

    CMV18301/2 HP Packaged Sewage Ejector System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications residential septic tank, sewage and large sumps

    Capacities 95 GPM 360 LPM

    Shut-off head 18 shut-off: 19 shut-off:

    5.5 m 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling raw sewage, effluent and drain water

    Intermittent liquid temp up to 140F up to 60CMotor electrical data 1/2 HP, PSC, 1625 RPM, 115V,

    12A, 1, 60HzAcceptable pH range 6-9

    Discharge, NPT 2 50.8 mm

    sPeCIFICAtIons

    M9037sse

    FeAtUres

    Complete package for versatile applications includes: CMV5A-11 sewage pump

    1/2 HP, 115V, 12A, 1, 60Hz

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Recessed vortex impeller provides minimal radial loading for long bearing life

    Wide-angle mercury-free mechanical float switch for maximum drawdown

    Recessed vortex impeller operates completely out of volute and provides free flow through passage for solids and liquids

    Basin: 18 x 30 structural foam

    construction 30-gallon capacity 4 plastic slip type

    or cast iron inlet hubSealed Cover: 18 solid structural foam

    cover with 2 discharge flange, vent flange suitable for 2 or 3 vent, or split steel with 2 or 3 vent

    Check Valve: 2 full swing

    Pump Only

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    20

    15

    10

    5

    0

    6

    5

    4

    3

    2

    1

    0

    0 50 100 150 200 250 300 350

    0 10 20 30 40 50 60 70 80 90 100

    CMV5 1/2 HP

    PAGE 41

  • SEWAGE PUMPS

    M9161sse

    SRM-BP BasinPro 4/10 HP Packaged Sewage System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 95 GPM 360 LPM

    Shut-off head 19 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling septic effluent and sewage

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 4/10 HP, PSC, 115V, 12A, 1, 60Hz

    Acceptable pH range 5-9

    Discharge NPT 2 50.8 mm

    Housing heavy cast iron

    Power cord 20, 16/3, SJTW

    Impeller recessed, thermoplastic

    Volute case cast iron

    Shaft seal type 11A, carbon & ceramic

    Basin size 24 x 24 structural foam construction

    sPeCIFICAtIons

    FeAtUres

    Power for versatile applications

    Residential septic tank sewage

    Large sumps Long-lasting performance Oil-filled motor for

    maximum heat dissipation and continuous bearing lubrication

    Recessed vortex impeller for free flow of liquids, solids up to 2 diameter

    Rotary shaft seal has carbon and ceramic faces for positive seal

    Thermal overload protection with automatic reset

    Pump is pre-installed in basin, with integral torque stops to ensure stability

    Available with alarm, optional

    Basin: Stackable design allows

    for compact inventory Integral 360 top grip for

    easy lifting and handling in tight spaces

    24 x 24 structural foam construction; 45-gallon capacity

    Shallow 24 deep basin reduces installation time for digging pit

    Anti-floatation features include concrete splash lip and unique basin shape to keep the system from floating or becoming un-installed

    Concrete-proof cover insert protects the system from damage during rough-in and masonry work

    E-Z Switch rod allows removal of float switch without disassembling basin lid, or handling pump or plumbing. Additional clip for secondary float included; float sold separately

    Pump Only

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    24

    20

    16

    12

    8

    4

    00 10 20 30 40 50 60 70 80 90

    7

    6

    5

    4

    3

    2

    1

    40 80 120 160 200 240 280 320 360

    SRM4 4/10 HP

    PAGE 42

  • SEWAGE PUMPS

    CMV-BP BasinPro 1/2 HP Packaged Sewage System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 95 GPM 360 LPM

    Shut-off head 18 shut-off: 19 shut-off:

    5.5 m 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling raw sewage, effluent and drain water

    Intermittent liquid temp up to 140F up to 60CMotor electrical data 1/2 HP, PSC, 1625 RPM, 115V,

    12A, 1, 60Hz

    Acceptable pH range 6-9

    Discharge, NPT 2 50.8 mm

    Housing cast iron

    Power cord 20, 16/3, SJTW

    Impeller recessed, thermoplastic

    Volute case thermoplastic

    Shaft seal type 11A, carbon & ceramic

    Basin size 24 x 24 structural foam construction

    sPeCIFICAtIons

    M9162sse

    FeAtUres

    Engineered for many years of maintenance-free operation

    Wide-angle, mercury-free mechanical float switch for maximum drawdown

    Recessed vortex impeller operates completely out of volute and provides free flow through passage for solids and liquids

    Durable motor will deliver many years of reliable service

    Available with alarm, optional

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Recessed vortex impeller provides minimal radial loading for long bearing life

    Pump is pre-installed in basin, with integral torque stops to ensure stability

    Basin: Stackable design allows for

    compact inventory Integral 360 top grip for

    easy lifting and handling in tight spaces

    24 x 24 structural foam construction; 45-gallon capacity

    Shallow 24- deep basin reduces installation time for digging pit

    Anti-floatation features include concrete splash lip and unique basin shape to keep the system from floating or becoming un-installed

    Concrete-proof cover insert protects the system from damage during rough-in and masonry work

    E-Z Switch rod allows removal of float switch without disassembling basin lid, or handling pump or plumbing. Additional clip for secondary float included; float sold separately

    Pump Only

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    20

    15

    10

    5

    0

    6

    5

    4

    3

    2

    1

    0

    0 50 100 150 200 250 300 350

    0 10 20 30 40 50 60 70 80 90 100

    CMV5 1/2 HP

    PAGE 43

  • SEWAGE PUMPS

    M9178sse

    MW-BPBasinPro 1/2 HP Packaged Sewage System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage, high-capacity sump, effluent

    Capacities 135 GPM 510 LPM

    Shut-off head 27 shut-off 8.23 m

    Solids handling 2 50.8 mm

    Liquids handling domestic sewage and drain water

    Intermittent liquid temp. up to 140F up to 60CMotor electrical data 1/2 HP, 1625 RPM, PSC (1),

    oil-filled, 115V, 9A, 1, 60Hz; 230V, 4.5A, 1, 60Hz

    Acceptable pH range 5-9

    Discharge NPT 2 50.8 mm

    Housing cast iron

    Power cord 20, 16/3, SJTW

    Impeller thermoplastic

    Volute case class 30 cast iron

    Shaft seal type 6, carbon & ceramic

    Basin size 24 x 24 structural foam construction

    sPeCIFICAtIons

    FeAtUres

    Fully assembled; pump is pre-installed in basin, with integral torque stops to ensure stability

    Oil-filled motor for maximum heat dissipation and continuous bearing lubrication

    Recessed vortex impeller for free flow of liquids, solids up to 2 diameter

    Available with alarm, optional

    Basin: Stackable design allows

    for compact inventory Integral 360 top grip for

    easy lifting and handling in tight spaces

    24 x 24 structural foam construction; 45-gallon capacity

    Shallow 24- deep basin reduces installation time for digging pit

    Anti-floatation features include concrete splash lip and unique basin shape to keep the system from floating or becoming un-installed

    Concrete-proof cover insert protects the system from

    damage during rough-in and masonry work

    E-Z Switch rod allows removal of float switch without disassembling basin lid, or handling pump or plumbing. Additional clip for secondary float included; float sold separately

    30

    25

    20

    15

    10

    5

    00 20 40 60 80 100 120 140

    10

    8

    6

    4

    2

    0

    0 100 200 300 400 500

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    MW50 1/2 HP

    Pump Only

    PAGE 44

  • SEWAGE PUMPS

    MRJ 4/10 HP Ready Jon System

    sPeCIFICAtIonssPeCIFICAtIons

    Applications basement bathroom

    Capacities 95 GPM 360 LPM

    Shut-off head 19 5.8 m

    Solids handling 2 50.8 mm

    Liquids handling septic effluent and sewage

    Intermittent liquid temp up to 140F up to 60CMotor electrical data 4/10 HP, shaded pole,

    115V, 12A, 1, 60Hz; 230V, 6A, 1, 60Hz

    Acceptable pH range 5-9

    Discharge, NPT 2 50.8 mm

    Housing heavy cast iron

    Power cord 10 (20 optional)

    Impeller recessed, thermoplastic

    Volute case cast iron

    Shaft seal type 11A, carbon & ceramic

    sPeCIFICAtIons

    M9038sse

    FeAtUres

    Sewage Ejector Pump Up Package Includes: SRM4S-1 (115V) 4/10 HP

    sewage pump Myers poly tank 2 check valve/discharge

    piping assembly Ideal for basements,

    room additions, factories and warehouses

    Simple installation Accommodates toilet,

    vanity or humidifier Fits almost anywhere Use with nearly any

    toilet style

    Concrete floor stays intact; no need to destroy flooring since the Ready Jon can be installed freestanding on top of any level surface

    Tank and piping can be hidden behind a wall

    Pump Only

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    24

    20

    16

    12

    8

    4

    00 10 20 30 40 50 60 70 80 90

    7

    6

    5

    4

    3

    2

    1

    40 80 120 160 200 240 280 320 360

    MRJ - Ready Jon 4/10 HP

    PAGE 45

  • GRINDER PUMPS

    M9039sse

    MRG202 HP Single Seal Grinder Pump for Residential Applications

    sPeCIFICAtIonssPeCIFICAtIons

    Applications sewage grinding, effluent and wastewater removal

    Capacities 45 GPM 170 LPM

    Shut-off head 105 32 m

    Liquids handling raw sewage

    Intermittent liquid temp. up to 140F up to 60CWinding 311F 155CMotor electrical data 2 HP, 3450 RPM, 1 - capacitor

    start/run 230V; 60Hz, 15A

    Acceptable pH range 6-9

    Discharge NPT 1-1/4 31.75 mm

    Sump diameter duplex 36 91.4 cm

    Motor housing cast iron

    Power cord 20

    Impeller eng. thermoplastic

    Shaft seal (Optional)

    carbon & ceramic tungsten carbide

    Impeller thermoplastic

    Power cord 20

    Pump, motor shaft stainless steel (416 SS)

    Min. sump diameter Simplex: Duplex:

    24 36

    61.0 cm 91.4 cm

    sPeCIFICAtIons

    FeAtUres

    The MRG20 Series features a patented cutter mechanism and recessed impeller design to effectively macerate typical sewage solids into fine slurry

    Durable motor will deliver many years of reliable service

    Oil-filled motor for maximum heat dissipation and constant bearing lubrication

    Recessed impeller reduces radial bearing loads and increases bearing life

    High-torque capacitor starts single-phase motor for assured starting under heavy load; no external capacitor needed

    CAPACITY GALLONS PER MINUTE

    TOTA

    L H

    EAD

    IN M

    ETER

    S

    TOTA

    L H

    EAD

    IN F

    EET

    CAPACITY LITERS PER MINUTE

    140

    120

    100

    80

    60

    40

    20

    0

    45

    40

    35

    30

    25

    20

    15

    10

    5

    0 10 20 30 40 50 60 70 80

    50 100 150 200 250 300

    MRG20 2 HP

    Heavy-duty 2 HP listed, wide-angle float switch

    On-winding current and temperature-sensitive overload

    The MRG20 is designed for easy maintenance

    Shredding ring and grinder impeller are replaceable without dismantling pump or motor (440 Stainless

    Steel, 58-60 Rockwell) 300 Series Stainless

    Steel fasteners CSA Listed

    PAGE 46

  • GRINDER PUMPS

    MRG20 Grinder Pump Systems Completely Pre-Engineered, Pre-Packaged, Pre-Assembled* Systems Ready for Installation

    sPeCIFICAtIonssPeCIFICAtIons

    Applications package designed specifically for use in residential or light commercial sewer applications with long discharge or high static heads

    Pump Myers model MRG20; 2 HP, capacities to 42 GPM, shut-off head 105 feet (see page 46 for more detailed specifications)