ssg secondary glazing - senior architectural systems...double glazing. the wide air space between...

SSG Series Product Assembly

Manual 2014

SSG

SECONDARY GLAZING

Introduction The Company Senior Architectural Systems is a UK based group which operates through a network of regional Service Centres. Its' operations include the main business of stockholding in both systemized and standard aluminium extrusions. Mill finish, anodised (natural and bronze), and powder coated sections are held in stock, along with all of the necessary accessories for manufacture. The incorporation of new or modified sections, system compatible, is carried out when required. The emphasis is on service to our clients, with response speed being very much of the essence. Deliveries are made on dedicated vehicles in our own livery, into all areas of the country on a regular basis - collections can be easily arranged for direct release (ex. works) to our clients' instructions. Short notice collections can also be arranged in the event of the occasional, and inevitable 'emergency'.

The Product Range Other product ranges available from Senior Architectural Systems include: -

Entrances and Doors, Curtain Walls, Sub Frames, Mid-Rise Commercial Windows, Patent Glazing, Standard Angles and Rectangular Tubes, Residential Windows and Doors, Patio Doors .

Quality Assurance We are committed to the aims of ISO 9001 Quality Assurance. In the event of questions or queries concerning the contents of this manual or any other product on offer from Senior Architectural Systems, please do not hesitate to contact us on:

Senior Architectural Systems (Head Office) 01709 772600

Senior Architectural Systems Scotland 01506 407640

Senior Architectural Systems South 01633 277880

Senior Architectural Systems operate a policy of continuing development and reserve the right to amend and improve their products without notification. Every effort will however be made to ensure that up-dates are circulated to our clients for information as deemed necessary.

All items contained in this manual are subject to our normal terms and conditions, a copy of which is available on request. Whilst we make every effort to ensure the accuracy of the drawings and measurements contained in this manual, we neither warrant nor guarantee the accuracy and you should undertake your own measurements and not place any reliance on or act in consequence of the contents herein.

SSG Secondary Glazing SSG10.1.ii 06.14

Specifications Description The range of aluminum alloy Secondary Windows as detailed are designed for double glazing existing primary windows. They are easily fitted and operated, and allow for cleaning and maintaining both the existing primary and applied Secondary Window. When installed, they will give all the thermal and acoustic advantages of double glazing. The wide air space between the existing and Secondary Window can be more effective than the hermetically sealed double glazing unit. With the exception of the light duty fixed light, all units are set in identical designed outer frames suitable for installing adjacent to each other by using independently fixed corner or tee coupling mullions. Hinged windows however, cannot be hung directly from these mullions.

Materials Extruded aluminium is Aluminium Alloy 6063.T6 to BS 1474, 2008. Anodising: i) Natural (Silver) anodised to BS3987, 1991. and ii) Anolok Bronze Colour 547 anodised to BS3987, 1991. Anodising is to a minimum of 25 microns (AA25). Powder Coating is to BS EN 12206-1:2004.. Gasketry is manufactured in accordance with BS3734.

Glazing Note: All Glazing should be carried out to the recommendations of B.S.6262. Single glazing 4mm to 6mm is standard using channel glazing gaskets

Size Limitations The Secondary Window range can be assembled in the following basic window types:- 1.Single Light Duty Fixed Light. Up to a maximum overall area 1.8m

2

3.Hinged Lights. (hinge weight limit 4kg) a. Side Hung - maximum ‘W’ = 700mm maximum ‘H’ = 1800mm b. Top Hung - maximum ‘W’ = 1500mm maximum ‘H’ = 600mm c. Double Side Hung maximum ‘W’ = 1400mm maximum ‘H’ = 1800mm 5.Horizontal Sliding. (maximum load for each roller 9kg) Using 76282 meeting stiles maximum ‘W’ = 1200mm maximum ‘H’ = 1300mm Using 76281 meeting stiles maximum ‘H’ = 2000mm

2.Single Fixed Light Up to maximum overall area 2.2m

2

4. Lift Out Weight is the main factor for these units and a limit of 15kg should not be exceeded. Maximum area for 4mm glass = 1.5m

2

Maximum area for 6mm glass = 1.03m2

6. Vertical Sliding. Weight is the main factor: Spirex, 13.7mm dia., capacity per pair = 13kg Maximum area for 4mm glass = 1.3m

2

Maximum area for 6mm glass = 0.88m2

The size and weight limits given for any of the Secondary Window units must not be exceeded. Hinged units always to be fitted with alignment wedges. For Vertical Sliding units, spiral balances and required balance brackets are obtained by direct order from the balance stockists only, giving information of window height, width, dimension to central meeting stile and glazing material.

Fittings See accessories listed for each window type. The double woven polypropylene pile weather stripping inserted into the integral grooves of inner frame sections (sliding and lift-out units) can be replaced in the event of damage or wear.

Maintenance Aluminium requires only regular washing down with soap (or mild detergent) and water.

SSG10.1.iii 06.14

SSG Secondary Glazing

Glass Weight (for Reference) 4mm = 10kg/m

2

6mm = 15kg/m2

Index

Description Detail Page. Last Issue Date Front Cover SSG10.1.i 06.14 Introduction SSG10.1.ii 06.14 Specification SSG10.1.iii 06.14 Index SSG10.1.iv 06.14 Blank SSG10.1.v 06.14 Section Identification SSG10.1.vi 06.14 Blank SSG10.1.vii 06.14

A - General Arrangements General Arrangements Light Duty Fixed Lights SSG10.A.01 06.14 General Arrangements Fixed and Hinged SSG10.A.02 06.14 General Arrangements Lift Out SSG10.A.03 06.14 General Arrangements Blank SSG10.A.04 06.14 General Arrangements Horizontal Sliding SSG10.A.05 06.14 General Arrangements Horizontal Sliding SSG10.A.06 06.14 General Arrangements Vertical Sliding SSG10.A.07 06.14 General Arrangements Vertical Sliding SSG10.A.08 06.14 B - Section Identification Full Size Sections Light Duty, Lift-Out and Horizontal Sliding SSG10.B.01 06.14 Full Size Sections Vertical Sliding and Miscellaneous SSG10.B.02 06.14 C – Accessory Components Accessories Accessories, Fixing Shims and PVC Packs SSG10.C.01 06.14

Accessories Blank SSG10.C.02 06.14

D - Cutting Formulas, Glass Deductions Section Properties All Aluminium Sections SSG10.D.01 06.14

Deductions Fixed, Hinged and Lift-Out SSG10.D.02 06.14 Deductions Horizontal Sliding SSG10.D.03 06.14

Deductions Vertical Sliding SSG10.D.04 06.14

E – Preparation Preparation Fixed / Hinged Light SSG10.E.01 06.14 Preparation Lift-Out SSG10.E.02 06.14 Preparation Horizontal Sliding SSG10.E.03 06.14 Preparation Horizontal Sliding SSG10.E.04 06.14 Preparation Vertical Sliding SSG10.E.05 06.14

SSG Secondary Glazing SSG10.1.iv 06.14

SSG10.1.v 06.14

SSG Secondary Glazing Blank

SSG10.1.vi 06.14

Light Duty Fixed Standard Fixed Standard Hinged

SSG76284 Top Rail, Bottom Rail & Stile Light Duty Fixed Light

SSG76292 Top Rail, Bottom Rail & Stile Fixed & Hinged Lights

SSG76293 Glazing Insert Fixed & Hinged Lights

Lift-Out

L

SSG76280 Top Rail

SSG76289 Head Insert (Outer Frame)

SSG76290 Stile

SSG76291 Bottom Rail

SSG76292 Head, Cill & Jamb (Outer Frame)


Horizontal Sliding

SSG76280 Top & Bottom Rail (Sliding Panels)

SSG76281 Meeting Stile Heavy Duty

SSG76282 Meeting Stile Light Duty

SSG76283 Locking Handle Stile

SSG76285 Head &Cill (Outer Frame)

SSG76286 Jamb (Outer Frame)

SSG76287 Reverse Meeting Stile Light Duty

SSG76288 Reverse Meeting Stile Heavy Duty

Section Identification

Vertical Sliding

SSG76280 Stile

SSG76281 Meeting Rail (Top and Bottom Sliding Sash)

SSGS76283 Top Rail (Top Sliding Sash) Bottom Rail (Bottom Sliding Sash)


SSG76286 Head & Cill (Outer Frame)

Miscellaneous

SSGCATCH Aluminium Catch Extrusion 2.0 metre length ( cut to size)

SSG Secondary Glazing SSG10.1.vii Blank 06.14

SSG10.MU.i SSG Secondary Glazing 06.14

Manual Update

Page No Update Description Date

10.1.vii SSGSSCRFR changed 03.11

10.A.02 SSGSSCRFR changed 03.11

10.A.08 SSGSSCRFR changed 03.11

10.C.01 SSGSSCRFR changed 03.11

10.1.iii Material specifications updated. 06.14

10.1.vi SSG76294, SSG76279 and SSG76295 omitted, 06.14

SSGCATCH aluminium was SSGSSPCAT upvc.

10.1.vii Now blank, see page 1 0.C.01 for accessories. 06.14

10.A.01 Dash omitted from accessories. 06.14

10.A.02 SSG76294 omitted, note amended for suitable angle by others. 06.14

10.A.03 Dash omitted from accessories. 06.14

10.A.05 Dash omitted from accessories, slider skid and track omitted, 06.14

plan layout applicable to panels C and detail F omitted.

10.A.06 Dash omitted from accessories, SSGCATCH aluminium was 06.14

SSGSSPCAT upvc, detail F omitted.

10.A.07 Dash omitted from accessories, SSGCATCH aluminium was 06.14

SSGSSPCAT upvc.

10.B.01 SSG76294 and SSG76279 omitted, SSGCATCH aluminium was 06.14

SSGSSPCAT upvc.

10.B.02 SSG76295 omitted, SSGCATCH aluminium was SSGSSPCAT upvc. 06.14

10.C.01 SSGSSOHBN, SSGWSTBPO omitted, SSGCATCH aluminium was 06.14

SSGSSPCAT upvc, SSGTRAK for fixed panels only (skids not available),

accessory usage F, J and O omitted.

10.D.01 SSG76279, SSG76294 and SSG76295 omitted. 06.14

10.D.03 See page 1 0.A.04 corrected to 1 0.A.05, optional slider skid and track 06.14

omitted.

10.E.01 SSG76294 omitted. 06.14

10.E.03 SSGCATCH aluminium was SSGSSPCAT upvc, deduction relating to 06.14

detail F (SSG76279) omitted.

SSG Secondary Glazing SSG10.MU.ii 06.14

Manual Update

Page No Update Description Date

SSG10.A.01 06.14

Key

SSG76284

Full size sections

Fixing screw by others


w

Outside

®

I

®

General Arrangements Light Duty Fixed Light Only

SSG76284 o/ ~ SSGWPC375 Weatherpile

SSG4MM 4mm Gasket SSG6MM 6mm Gasket

Outside

~~' SSG76284

---------,S,c:;S=G=76='-284° I @

For glass size cutting formula, see page 10.D.02

For fixing hole centres, see page 10.E.01

SSG Secondary Glazing SSG10.A.02 General Arrangements Fixed & Hinged Lights

Key

1-No Screw Fastener Upto 1500mm Height

Size Limits:-Fixed Light Hinged Side Hung Hinged Top Hung Double Side Hung

2-No Screw Fastener Between 1500mm - 1800mm Height Fixed at 1200mm Centres

SSGVSSOOO Vision Strip, Black SSGVSSOWO Vision Strip, White

w

Maximum Area 2.2m2

700(W) x 1800(H) SSGSOS500 12.7mm Seal, Black 1500(W) x 1000(H) SSGSOO625 17.0mm Seal, Black

1400(W) x 1800(H) SSG76292

@ Single Leaf

® rn

rn ®

I

SSG76293

SSGSSCRFR Screw Fastener


Outside


® Double Leaf

w

06.14

SFSCS0819 No8x19LG C'SK Setscrew


i ~£t;;'.-~._J SSG76294 omitted, so --......._ fit suitable sized angle

to first closing leaf for double side hung configurations

For glass size cutting formula, see page 10.D.02 For fixing hole centres, see page 10.E.01

SSG10.A.03 SSG Secondary Glazing 06.14 General Arrangements Lift-Out

D

Key

©

SSGVSSOOO Vision Strip, Black SSGVSSOWOVision Strip, White

Size Limits:-

4mm glass - Maximum Area 1.5m 2

6mm glass - Maximum Area 1.0m 2

Maximum glass weight 15kg

I

SSGSOS500 12.7mm Seal, Black SSGSOO62517.0mm Seal, White

SSG76292

® w

JJJ~1 Outside

Full size sections For glass size cutting formula, see page 1 0.D.02


4mm Gasket 6mm Gasket

Outside

@

SSG Secondary Glazing SSG10.A.04 Blank 06.14

SSG10.A.05 Secondary Series 06.14 General Arrangements - Horizontal Sliding

Size Limits (each sliding panel)

Maximum Width 1200mm Maximum Height 1300mm - Light Duty Maximum Height 2000mm - Heavy Duty Maximum Load per Roller 9kg

Vertical Key See plan for Horizontal data

SSG-VSSOO_--:-:----L Vision Strip, Black SSG-VSSOWO Vision Strip, White

® SSG-WPC37 Weatherpile

SSG7628

SSG7628

®

SSG76285

Outside

D B

1® B A

C Q) Q) ► ► ◄ ◄

10) !0~ t ~ ["

~D B

® t ► ►

Cp

I® ,,..

A

◄ H ~ ~

r_D -~--------,--,f ® e-<--,=--f,-®=_: -~

Plan Key

SSG-SOS500 17.0mm Seal, Black SSG-SOO625 12.7mm Seal, Black


r~•:~01 G,~,;,re•~

For glass size cutting formula, see page 1 0.D.03


SSG76282 Light Duty I

I

@ SSGWP0762 Weatherpile

SSG76282 Light Duty

Light Duty Meeting Stiles

A}~,, ~ v I

w

SSGVSSOOO Vision Strip, Black

w

.SSGVSSOWO Vision Strip, White SSG76281 Heavy Duty (detailed)

JI KQ) f~i)

SSG76282 Light Duty

~ See detail(E2) ~ for Light Duly

SSGWP0762 Weatherpile

SSGWPC375 SSG76281 Heavy Duty (detailed) Weatherpile SSG76282 Light Duty

i Full size sections

Outside

SSG76288 Heavy Duty (detailed)

SSG76288 ® Heavy Duty (detailed)

SSG76287 =--. LightDuty

SSG76287 Light Duty

lz@)"_:E?:' > SSGWPC375 Weatherpile

Heavy Duty (detailed)

SSG76287 { l f )

Heavy Duty (detailed)

Light Duty


SSG76282 Light Duty


SSG76282 Light Duty

Light Duty

w

SSGCATCH ® Aluminium Catch

For glass size cutting formula, see page 1 0.D.03


G) CJ) ~ CJ) ~ G)

~ CJ) ~ CD

c.c ("')

~ 0 CD :::J ~ a.

Q)

~~ g G) ,-+, -Q) Q) en N

-■ 0: :::J

cE cc

0 !='"' ~

.j>.

en en G) ~

0 . )> . 0 CJ)

SSG10.A.07 SSG Secondary Glazing General Arrangements - Vertical Sliding

Note:-

C

Size Limits:-Maximum Area= 1.30m 2 per panel (4mm glass)

0.88m2 per panel (6mm glass) (weight limit Spirex Balance)

Weight is the main factor:

SSGSOS500 12.7mm Seal, Black SSGS00625 17.0mm Seal, Black

SSG76283 SSG4MM 4mm Gasket SSG6MM 6mm Gasket

SSG76281 Heavy Duty (detailed) SSG76282 Light Duty

Spirex, 013.7mm, capacity per pair= 13kg ::r::

Meeting Rails

Spirex Sash Balances and Sash Brackets are available by direct order from Caldwell Hardware (UK) Ltd,. See note in price list.

SSG76282

SSG76282


Light Duty Meeting Rails

NOTE:- No Finger Pulls on light duty arrangement; if used, consideration should be made for the operation of the upper sliding panel. We recommend the use of section SSG76281 as standard.


* rn Q) N

if)

SSG76282 Light Duty

SSGCATCH

©


Note* SSG76286 Sizes A and B to be specified by surveyor, and panel split arranged Fixing screw to give suitable access to prime by others window ventilator hardware.

Height (H) = A + B

For glass size cutting formula, see page 1 0.D.04 For fixing hole centres, see page 10.E.05

Outside

SSGHFSEWO

SFSCS0819 Hinge i----1.§.& No8x19LG C'SK Setscrew

y

@ SSGWPC375 Weatherpile

Full size sections Fixing screw/ byot~

~ \ ,f


For glass size cutting formula, see page 1 0.D.04 For fixing hole centres, see page 10.E.05

SSGSSCRFR Screw Fastener

G) CJ) ~ CJ) ~ G)

~ CJ) ~ CD

c.c (") ~ 0 CD :::J ~ a.

I Q)

~~ ~ ("') G) Q) -- -en Ql a; N ::::I -■ c.c

0 !="' ~

.j>.

:::J cc

en en G) ~

0 . )> . 0 CX)

SSG10.B.01 SSG Secondary Glazing 06.14 Section Identification

SSG76284 Top Rail, Bottom Rail & Stile

For Light Duty Fixed Light Secondary Windows or Standard Fixed / Hinged Light Secondary Windows

----------4'l------

SSG76292

Top Rail, Bottom Rail & Stile

18.97

SSG76293 Glazing Insert

Light Duty Fixed Light Fixed & Hinged Lights Fixed & Hinged Lights

For Lift Out Secondary Windows --------4'l-------

10.54 ----28. 7------<- ----28. 7------<-

18 97 :fl

N ct'l et') cci ~ ~ ----SSG76280 SSG76289 SSG76290 SSG76292

Top Rail Head Insert (Outer Frame)

10.54

SSG76280 Top & Bottom Rail

(Sliding Panels)

Stile Bottom Rail Head, Cill & Jamb

(Outer Frame)

For Horizontal Sliding Secondary windows

24.4297

SSG76281 Meeting Stile

Heavy Duty

SSG76282 SSG76283 SSGCATCH Meeting Stile Locking Handle Stile Sliding Frame Catch

Light Duty

~ ..;1.: -----ll1.·<------- 14.84 24.43

L~ (0 et')

►

I_

• ► •

41

SSG76285 Head & Cill (Outer Frame)

. SSG76287 SSG76288

J -------411--------Reverse Meeting Stile Reverse Meeting Stile Light Duty Heavy Duty


SSG Secondary Glazing SSG10.B.02 Section Identification

For Vertical Sliding Secondary Windows

10.54

SSG76280 Stile

L~ (0 C')

•

I_

41 3

• •

4·

24.43

SSG76281 Meeting Rail Top and Bottom Sliding sash

.. ' -J


SSG76283 SSGCATCH Top Rail Sliding Frame Catch (Top Sliding Sash)

Bottom Rail (Bottom Sliding Sash)

-----,41_-..___ __ __

(0 C')

Miscellaneous

---------4"l-----------SSG76286 Head and Cill (Outer Frame)

06.14

SSG10.C.01 SSG Secondary Glazing 06.14

SSG4MM 4mm Gasket

SSG6MM ® 6mm Gasket

® SSGWPC375 e. Weatherpile Seal

SSGWPO762 Weatherpile Seal

©~ SSGSOS500 12.7mm Seal, Black

SSGSOO625 17.0mm Seal, Black

SSGVSSOOO Vision Strip, Black

SSGVSSOWO 0 Vision Strip, White

✓~ SSGSSCRFR Screw Fastener (Hinged Lights Only)

SSGSSTBTN Turn Button (Lift Out Units) Complete With Spacer

SSGSSROLA Carriage Wheel (9Kg Max. Load)

OMITTED

SSGTRAK Hor Sliding Track, White (For Fixed Panel Only)

Accessories

SSGSCOOOO Catch Spring

SSGSSMRES Meeting Stile End Stop

@ OMITTED

~/ / ~~m~f: J.~H&irus;o, ~ 2.0m length (cut to size)

Accessory Usage For Fixed & Hinged Lights For Lift-out For Horizontal Sliders For Vertical Sliders

A A A K A K (limit stops) B B B L B L C C C M C N D D D P Catches ( 100mm) D E G H E P Catches(100mm)

Fixing Shims Loose PVC Packs Sash Balances

~ SPS1 <> SWGB Fixing Shim 1.5mm (Yellow) PVC Packer 25x25x3 (Brown) Spirex Sash Balances

~ SPS3 ~ SWGB-5 Sash Brackets (Top & Bottom)

Fixing Shim 3mm (Red)

~ PVC Packer 25x12.5x4.5 (Blue) Available by direct order from

~ SPS5 SWGB-6 Caldwell Hardware (UK) Ltd

Fixing Shim 5mm (Black) PVC Packer 25x12.5x6 (Orange) See note in price list

SSG Secondary Glazing SSG10.C.02 Blank 06.14

SSG10.D.01 SSG Secondary Glazing 06.14 Section Properties

AXIS

Section Properties

Section lxx lyy Painted External Internal Surface Perimeter Perimeter

SSG76280 w --- --- 32mm 100mm ---

SSG76281 !btJ --- --- 86mm 138mm 36mm

SSG76282 !lJ --- --- 55mm 109mm ---

SSG76283 ~ --- --- 104mm 128mm ---

SSG76284 y --- --- 57mm 91mm ---

SSG76285 ~ --- --- 110mm 312mm 46mm

SSG76286 ~ --- --- 110mm 350mm 46mm

SSG76287 fbl --- --- 35mm 113mm ---

SSG76288 fy:J --- --- 108mm 142mm 36mm

SSG76289 L --- --- 16mm 65mm ---

SSG76290 M...., --- --- 88mm 127mm ---

SSG76291 Yw-o --- --- 97mm 136mm ---

SSG76292 ~ --- --- 105mm 293mm ---

SSG76293 J1 --- --- 25mm 84mm ---

SSG Secondary Glazing Glass Cutting Sizes - Fixed, Hinged and Lift-Out

1i----i---------Glass Size---------

1-------- O/AII Frame (W) or (H) --------

h----i--------Glass Size-------

1-------- O/AII Frame (W) or (H) --------

----3h-----o-t-------t.;lass SizP.--------

--------O/AII Outer Frame Width (W)-------

All dimensions in mm.

SSG10.D.02

Description and Formula

Light Duty Fixed Light

Glass Size= Required Overall Frame Width (W) Less 20 Required Overall Frame Height (H) Less 20

Fixed and all Hinged Lights

Glass Size= Required Overall Frame Width (W) Less 49 Required Overall Frame Height (H) Less 49

Lift-Out: Glass Width

Glass Size= Required Overall Outer Frame Width (W) Less 70

Lift-Out: Glass Height

Glass Size= Required Overall Outer Frame Height (H) Less 70

06.14

SSG10.D.03 06.14

~ :E Cl 'iii ::c Ql E ~

LL Cillwith Carriage Wheel Assembly

SSG Secondary Glazing Glass Cutting Sizes - Horizontal Sliding



Glass Width (between outer frame and meeting/reverse meeting stile centreline)

Glass Size= Size A or D Less 40

Glass Width (between two meeting/ reverse meeting stile centres)

Glass Size= Size B Less 2

Glass Height

Glass Size= Required Overall Outer Frame Height (H) Less 78

SSG Secondary Glazing Glass Cutting Sizes - Vertical Sliding

---- .,.._ __ _,__ __ , ,__,_ __ ---<•lass Siz<>------

>-----O/AII Outer Frame Width (W)-----


~ :E Cl

"cii J: Q)

E ~

LL

SSG10.D.04 06.14


Glass Width

Glass Size=

Required Overall Outer Frame Width (W) Less 78

Glass Height

Top Sash Glass Size = Size A Less 40

Bottom Sash Glass Size = Size B Less 40

SSG10.E.01 SSG Secondary Glazing 06.14 Fixed/ Hinged Light Preparation

Light Duty Fixed light

-------------<:utLenglh------------1 ___ Structural fixing holes ---+-,■.--.,--------·12.,_ ____ __,_

not to exceed 500 centres

n 04.5 -~1-----

~ ~~---~·?-----+-----'? ~ t___ Top and bottom rails only --==! ~

Fixed / Hinged light -Ul Leng!

-87 l c<5

--Ek_L __ -04.0 oo3t'" outer inner web• >

web

f -17 ~

I 150

Fasteners not to exceed 600 centres -----------

__ Structural fixing holes not to exceed 500 centres

~05.5 -Hinge Hole

I

. Hinges not to Exceed 500 cent~

----------cut Length---------1

1J i.____ __ _____. All dimensions in mm.

Desription & Formula Top Rail, Bottom Rail and Stile (Light duty fixed light only)

SSG76284

Frame assembly hole preparation (Top and Bottom Rail only) and structural fixing hole preparation

Cut Length = Req.d overall frame width (W)

(Top and Bottom Rails) and = Req.d overall frame height (H)

(Stiles) 45° Mitred Corners

Top Rail, Bottom Rail and Stile (Fixed light only)

SSG76292

Frame assembly hole preparation (Top and Bottom Rail only)

Hinge hole preparation (Hinge Stile only)

Screw fastener hole preparation (Closing Stile only) (A)

Structural fixing hole preparation (B)

Cut Length = Req.d overall frame width (W)

(Top and Bottom Rails) and = Req.d overall frame height (H)

(Stiles) 45° Mitred Corners

Glazing Insert SSG76293

Cut Length: = Req.d overall frame width (W)

less 64 (Top & Bottom Rail) and = Req.d overall frame height (H)

less 41 (Stiles) Square cut ends

SSG Secondary Glazing Lift-Out Preparation

i----------<:utLength----------

-a-i 1 (')

~04.0

~o~~o ~

outer inner web web

-17 ~ I

--Structural fixing holes --i------· not to exceed 500 centres

05.5

-------------<:ut Length-----------1

Note: all mitres for Lift-Out panels = 17 .15


SSG10.E.02 06.14

Description & Formula

Head, Cill and Jamb (Outer Frame)

SSG76292

Frame assembly hole preparation (Head & Cill only)

Structural fixing hole preparation

Cut Length: = Req.d outer frame width (W)

(Head & Cill) and = Req.d outer frame height (H)

(Jambs) 45° Mitred ends

Head Insert (Outer Frame)

SSG76289


less 41 Square cut ends

Top Rail (Lift-Out Panel)

SSG76280

Frame assembly holes and section end preparation


less 50 45° Mitred ends

Bottom Rail

SSG76291




Stile

SSG76290

Section end preparation (cut back at head only)

Cut Length: = Req.d outer frame height (H)


SSG10.E.03 SSG Secondary Glazing 06.14 Horizontal Sliding Preparation

-----------cut Length---------1--6-~-1

~J J 04.0...., __;2, ~

Handle section

-----------< :ut Length----------

Fit End Stops to heavy duty sections only

Handle & claw section cut back

,-----------------............. 1-22

04.04

-----------cut Length-----------1

Fit End Stops to heavy duty sections only

Handle & claw section cut back 1-22 ~----------------~

04.04


Description & Formula Handle Stile

SSG76283


Cut length: = Req.d outer frame height (H)


Meeting stile

SSG76282 and SSG76281 (Heavy Duty)




Reverse Meeting stile

SSG76287 and SSG76288 (Heavy Duty)




Sliding Frame Catch {Aluminium)

SSGCATCH

Cut length = 100 Square cut ends

SSG Secondary Glazing Horizontal Sliding Preparation

--125 from end--i----Structural fixing holes not to exceed 500 centres

Note: When assembling bottom corner of sliding panel, attach Carriage Wheel fixing bracket with corner assembly screw

SSG10.E.04 06.14

Description & Formula

Head & Cill (Outer Frame)

SSG76285

Frame assembly hole preparation


Cut Length: = Req.d outer frame width (W) 45° Mitred ends

Top and Bottom Rail

SSG76280 Cut Length=

---------------1 1. Outer frame to centre line of

05.0

Note: Preparation to Bottom Rail only if Slider Skid and Track option used

1----125, ______ Structural fixing holes not to exceed 500 centres


meeting/reverse meeting stile less 20 2. Centre line of meeting/reverse meeting stile to centre line of meeting/reverse meeting stile plus 18 3. Centre line of bi-parting stile to centre line of meeting/reverse meeting stile plus 6

45° Mitred ends

Jambs (Outer Frame)

SSG76286

Cut Length: = Req.d outer frame height (H) 45° Mitred ends


Slider Track (Outer Frame) SSG-SSTRAK (when required)

Cut Length: = Req.d outer frame

width (W) less 42 Square cut ends

SSG10.E.05 SSG Secondary Glazing 06.14 Vertical Sliding Preparation

-

(A)

1---------------cut Length--------------

LJl 01---c ,-~ ~ ~ <.....

-------- L _~J

1 ~ 03.2 outer web only I - ( ,r .,...

CX)

I oci

-) I I

15v I 1-----------------l;ut Length-------------

--------·15tt---------,..--- Hinges not to exceed 500 centres

(D)

05.5

tf-----------i-- Fasteners not to exceed 600 centres

Fit Anti-Crabbing Mould 'C' or 'D' ----,::..J---+-----'-(handed) before frame assembly

Handle section cut back

1 _ ----_ :e:h_ -j~ ~20=1)

~----------------~ Handle section cut back

Fil Anti-Crabbing Mould 'B' before frame assembly

04.0

======================1-10--l

Claw section cut back

1--------------cut Length--------------

}


Description & Formula Head and Gill (Outer Frame)

SSG76286

Alignment wedge hole preparation (Gill only)

Cut Length: = Req.d outer frame width (W) 45° Mitred ends

Jambs (Outer Frame)

SSG76285

Frame assembly (~nd sash balance (B~ole preparation. Also hinge hole ((ijreparation (Hinge jamb) or screw fastener (D) hole preparation (Closing jamb)

Non Hinged units Structural fixing hole preparation as for Horizontal slider. See page 10.E.04

Cut Length: = Req.d outer frame height (H) 45° Mitred ends

Top Rail (Top Sash) and

Bottom Rail (Bottom Sash)

SSG76283 Frame assembly holes and section end preparation



Meeting Rail (Top and Bottom Sash)

SSG76281




Stile

SSG76280

Cut Length: = Size A less 20 = Size B less 20 (see pages 10.A.05 and 10.D.04) 45° Mitred ends

ssg secondary glazing - senior architectural systems...double glazing. the wide air space between...

Documents