staadpro notes
DESCRIPTION
STAAD is a comprehensive structural engineeringsoftware that addresses all aspects of structuralengineering –analysis, design, verification, andvisualization.TRANSCRIPT
![Page 1: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/1.jpg)
ENGI 7704 Design of Steel Structures
Computer Analysis of Steel Structures by STAAD
1
![Page 2: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/2.jpg)
STAAD PRO 2004 SOFTWARESTAAD is a comprehensive structural engineering
software that addresses all aspects of structuralengineering – analysis, design, verification, andvisualization.
STAAD performs the analysis and design of thestructure for different types of structures, such astrusses, plane, space (3D), floors (2 D plane and butloads are vertical or out of that plane).
2
![Page 3: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/3.jpg)
STAAD TutorialsGiving demonstration for how to use the software by
showing only the basic steps for static analysis.
As STAAD has two main methods of modeling (input editor (script language) and/or through graphicalenvironment). Tutorials will show only graphical methods.
Further readings and more information about the program can be found through the internet.For example www.reiworld.com
3
![Page 4: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/4.jpg)
STAAD Tutorial No.1ANALYSIS & DESIGN OF STEEL TRUSS
4
![Page 5: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/5.jpg)
TUTORIAL NO.1: STEEL TRUSS
The figure above shows a steel truss from several trusses supposed to cover a certain area. As shown, the truss has a cantilever part its span equals 4.0m. The proposed truss depth is3.0m.The loads as shown, are concentrated at the truss joints. The values of its load case are shown. Use all the data you take in the Steel Course for analysis and design.
5
![Page 6: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/6.jpg)
Main Steps of Modeling
Entering job information.Building model geometry.Defining member properties, sections.Assigning loads (load cases, combinations..)Defining pre-analysis print out, analysis type,
and post-analysis printout.Defining design requirements.
6
![Page 7: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/7.jpg)
How to Start the Program?
From Start Menu - Select the STAAD.Pro icon from theSTAAD.Pro 2004 program group.
7
![Page 8: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/8.jpg)
8
![Page 9: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/9.jpg)
9
![Page 10: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/10.jpg)
The STAAD Graphical Environment will be invoked and the following screen will appear:
10
![Page 11: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/11.jpg)
1. ENTERING JOB INFORMATION.
11
![Page 12: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/12.jpg)
12
2. Building Model (Structure) GeometryHow to Define the Truss Geometry?One of the methods that you can create construction lines and then draw on these lines the truss members.
Noting that the number ofconstruction lines is excluding first line.
![Page 13: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/13.jpg)
13
![Page 14: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/14.jpg)
14
![Page 15: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/15.jpg)
How to see the Diagram Labels (ex. Node numbers, beam numbers, etc.?
15
![Page 16: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/16.jpg)
Node and beam labels are a way of identifying the entities we have drawn on the screen, and very useful when dealing with the output results.
16
![Page 17: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/17.jpg)
Property:In which we can define or choose sections properties of the members of the truss.Spec.:In which we can define or choose members’specifications.Support:In which we can define the supports properties (restraints).Load:In which we can define the applied loads, load cases, load combinations.MaterialIn which we can define the material properties.(ex. E, density, etc.)
3. Defining member properties, sections
17
![Page 18: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/18.jpg)
Property:
18
![Page 19: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/19.jpg)
19
![Page 20: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/20.jpg)
Assigning the sections created to the model
20
![Page 21: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/21.jpg)
Supports
By clicking on the support
icon the shown window will
appear.
We have to create new
kinds of supports.
21
![Page 22: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/22.jpg)
22
![Page 23: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/23.jpg)
23
![Page 24: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/24.jpg)
24
![Page 25: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/25.jpg)
4. Defining Loads
The creation and assignment of load cases involves the following two steps:1. First, we will be creating all 3-load cases.2. Then, we will be assigning them to the respective members/nodes.
25
![Page 26: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/26.jpg)
26
![Page 27: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/27.jpg)
27
![Page 28: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/28.jpg)
Also, we can define load combinations according to required. For example, we can create a load combination1.25 D.L. + 1.5 L.L + 0.8 W.L.
28
![Page 29: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/29.jpg)
29
![Page 30: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/30.jpg)
30
![Page 31: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/31.jpg)
31
![Page 32: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/32.jpg)
32
![Page 33: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/33.jpg)
33
![Page 34: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/34.jpg)
34
![Page 35: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/35.jpg)
35
![Page 36: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/36.jpg)
36
![Page 37: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/37.jpg)
37
![Page 38: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/38.jpg)
38
![Page 39: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/39.jpg)
39
![Page 40: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/40.jpg)
40
![Page 41: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/41.jpg)
41
![Page 42: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/42.jpg)
42
![Page 43: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/43.jpg)
43
![Page 44: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/44.jpg)
44
![Page 45: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/45.jpg)
45
![Page 46: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/46.jpg)
46
![Page 47: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/47.jpg)
47
![Page 48: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/48.jpg)
48
![Page 49: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/49.jpg)
49
![Page 50: STAADPro Notes](https://reader030.vdocument.in/reader030/viewer/2022033005/55cf99c7550346d0339f1e02/html5/thumbnails/50.jpg)
50