stak n' store assembly instructionsblog.bindertek.com/wp-content/uploads/2018/07/stak-n... ·...
TRANSCRIPT
Stak N' Store Product Assembly Instructions
1. Lay the flattened box down so
that the blank side is facing up.
Fold up the two small flaps on the
left and right sides of the center of
the box.
Kit Components: 1 Exterior Stackable Master Box
6 Interior Archive File Boxes
6 Transfer Clips
Archive File Box Assembly2. Pull up the end of the box with
the tab, and fold it over the small
flaps from Step 1. Push down two
remaining flaps and press them
onto their respective tabs.
3. Push down the top flap
and fold over to close. Push
small insert tab into opening
to lock lid.
Stackable Master Box Assembly
1. Fold two bottom flaps (A) up.2. Fold Panels B and C in towards
the center. Fold both D flaps up.3. Fold both A flaps up into the box.
4. Fold flaps over both
sides of the box.5. Push small insert tab
into opening to lock lid.
www.bindertek.com | 800.456.3453