standard capacity: .22 initial resistance (in. w.g.) · 2018. 1. 19. · kp '1. 2" 500 fpm kph '1....
TRANSCRIPT
-
MERV 8 Standard and High-CapacitySelf-Supported Pleated Filters
TM
MERV 8
MERV 8 Efficiency
Standard Capacity: .22 Initial Resistance (In. W.G.)
High Capacity: .18 Initial Resistance (In. W.G.)
*See technical data for more information
-
Standard and High-CapacitySelf-Supported Pleated Filters
Single-Piece, Heavy Duty Beverage Board Frame
100% Synthetic, Moisture Resistant,
Self-Supporting Media
Pleat Stabilizer Strap
Die cutMedia PackSupport Grid
Water-Repellent Media Pack Sealant
Consistent pleat shape and spacing allow
particulate to collect evenly over the entire
surface of the media. Pleat stabilizer straps
add rigidity and maintain proper pleat
spacing. Photo of air leaving side on next page
shows the integral media pack support grid.
Boxed Pleat Tips
Frayed Ends
Boxed Pleat Tips
Purolator’s innovative Key Pleat® standard and high capacity filters are the best-performing self-supported pleat (SSP) on the market. Using breakthrough technology and processes by Purolator’s R&D team, the Key Pleat achieves a mechanical MERV 8 efficiency, extremely low pressure drop, and industry-leading dust holding capacity.
Media:Self-supported media – no metal wire backing!100% synthetic media resists moisture, mold, and damageHigh strength and rigidity, resulting in full depth loading and enhanced dust holding capacityMechanical efficiency produces increased efficiency as media loads
Pleat Consistency:The Key Pleat possesses the most consistent pleat spacing on the market, achieved with innovative media and a fully automated manufacturing process. The direct adhesion between the media and frame resists movement, bunching, and collapsing during use, supporting a consistent low pressure drop, balanced dust loading, and longer service life.
Construction:Die cut, single-piece beverage board frameThree pleat stabilizer straps on upstream sideSeven strap die cut on air leaving side of the filterIntegral media pack support grid on downstream side100% water repellent, high-strength adhesive coats entire interior of frameOver 140 (SC) and 250 (HC) adhesion points between media and frameBoxed pleat tips provide surface area for adhesion
Durability:The robust durability of the Key Pleat filters will save time and money previously wasted on replacing damaged wire-backed filters. With no metal that can warp or deform, moisture-resistant beverage board frame, and rugged synthetic media, the Key Pleat packs a punch and maintains its structural integrity even in wet or humid conditions.
-
Standard-Capacity (KP) High-Capacity (KPH)
Value-added summary:Synthetic media does not support microbial growthMechanical efficiencyNo metal, no corrosionFully incinerable, environmentally friendly disposalDurable and damage resistant constructionDie cut adhesion and design engineered for high strength and supportUniform pleat spacing maximizes performanceWater and moisture resistant media, frame, and adhesiveProudly made in the USA
Applications:All standard commercial applications with normal operating environmentsLow and medium dust-loading industrial applicationsFinal filters for MERV 8 requirementsPre-filters in multi-stage systemsNot for use in high temperature applications or applications with very high or turbulent airflow
Integral media pack support
grid on air leaving side of filter.
-
Standard and High-CapacitySelf-Supported Pleated Filters
CLARCOR Air Filtration Products, Inc.
© 2015 CLARCOR Air Filtration ProductsCLARCOR Air Filtration Products has a policy of continuous product research and development and reserves the right to change design and specifications without notice.Terms and Conditions of Sale can be accessed in the "LOGIN" section at www.clcair.com/purolator
Distributed by:www.clcair.com/purolatorP-KEYPLEAT-0514
NOTES:1. MERV 8, MERV-A 8-A 2. All performance data is based on the ASHRAE 52.2-2012 Test Standard. Tested at 492 FPM for a 24x24x2 or 24x24x4 size filter.3. Maximum final resistance 1.0" W.G.4. Filters may be installed with the pleats either vertical (preferred) or horizontal.
Technical Data:
UL CERTIFICATE 10001663 QM
Nominal SizeW x H x D
Actual SizeW x H x D
Air Flow Capacity(CFM)
Initial Resistance1"@300 FPM
2", 4"@500 FPM
Gross Media Area (Sq. Ft.)
KP
2" 500 FPM
KPH
2" 500 FPM 4" 500 FPM
KP KPH KP KPH
10X20X110X24X112X12X112X20X112X24X114X14X114X20X114X24X114X25X1
15X20X116X16X116X20X116X24X116X25X1
18X18X118X20X118X24X118X25X120X20X120X22X120X24X120X25X1
24X24X1
25X25X1
415500
500600410585
625
665800
1000
900
91510001040125012001500
415500
500600410585
625
665800
1000
900
91510001040125012001500
0.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.150.15
2.81.82.8
2.4
4.04.25.2
4.64.86.04.1
5.25.44.85.55.96.1
9.1
4.4
5.15.4
4.05.05.9
5.25.66.8
6.2
9.49.1
11.810.0
10X20X212X20X212X24X214X20X214X25X215X20X216X16X216X20X216X24X216X25X218X18X218X20X218X24X218X25X220X20X220X24X220X25X2
24X24X225X25X2
8401000980
12201050890
1120
1400112512501500
1400
20852000
8401000980
12201050890
1120
1400112512501500
1400
20852000
0.220.220.220.220.220.220.220.220.220.220.220.220.220.220.220.220.220.220.220.22
0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18 0.18
4.04.8
5.56.96.0
6.5
8.26.6
9.28.09.6
10.112.211.812.9
6.1
9.08.8
11.09.58.5
10.212.212.810.611.4
12.915.116.219.5
20.5
12X24X416X20X416X25X418X24X420X20X420X24X420X25X424X24X4
- - - -----
10001120140015001400
2000
- - - - - - - -
0.150.150.150.150.150.150.150.15
- - -- - - - -
14.918.8
18.522.2
26.5
*
*
* Reverse Pleat
Underwriters Laboratories, Inc. Classification: Key Pleat filters are classified per UL 900 for flammability only.Operating Temperature Limits: Maximum operating temperature is 150°F (65°C).
TM
RussText BoxFILTECH INC.221 West Eighth AvenueWest Homestead, PA 15120-1010Ph. (412) 461-1400 ~ Fax (412) [email protected] www.filtechinc.com