standard equipment optional equipment hyundai models...standard and optional equipment may vary....

Standard and optional equipment may vary. Contact your Hyundai dealer for more information. The machine shown may vary according to International standards.All US measurement rounded off to nearest pounds or inches.

www.hyundai-ce.com 2008. 05 Rev.04

PLEASE CONTACT

180LC-7 / 180LCD-7

Some of the Photo may include optional equipment.

CRAWLER EXCAVATOR Applied Tier 2 Engine

ISO standard cab. All-weather steel cab with all-around visibility. Safety glass windows. Raise-up type windshield wiper. Sliding fold-in front window. Sliding side window. Lockable door. Hot & cool box. Accessory box & Ashtray

Computer Aided Power Optimization(New CAPO) system. 2-power mode, 3-work mode, 2-user mode. Auto deceleration & one touch deceleration

system. Auto warm up system. Auto overheat prevention system

Heater & DefrosterSelf diagnostic systemStarting aid, cold weatherCentralized monitoring. LCD display

Engine speedClock & Error code

. GaugesFuel level gaugeEngine coolant temperature gaugeHyd. oil temperature gauge

. WarningEngine coolant & Fuel levelCheck Engine & CPUEngine oil pressureEngine coolant temperatureHyd. oil temperature Low batteryAir cleaner clogging

. IndicatorPower max.Preheat & engine warming-up One touch decel

Door and cab locks, one keyAM/FM radio and cassette. Radio remote switchTwo outside rearview mirrorsFully adjustable suspension seat with seat beltSlidable joystick, pilot-operatedConsole box tilting system (LH.)Three front working lightElectric hornBatteries (2X12 VX100 AH)Battery master switchAutomatic swing brakeRemovable reservoir tankWater separator, fuel lineBoom holding systemArm holding systemCounterweight (2950 kg, 6500 lb)Mono boom (5.1 m, 16’ 9”)Arm (2.6 m, 8’ 6”)Track shoes (600 mm, 24”)Track rail guardFuel warmer

Air-conditioner (5000 kcal/hr, 20000 BTU/hr)Sun visor for cabin insideFuel filler pump (35 /min, 9.5 USgpm) Beacon lampSafety lock valve for boom cylinder

with overload warning deviceSafety lock valve for arm cylinderSingle acting piping kit (breaker, etc)Double acting piping kit (clamshell, etc)Accumulator, work equipment lowering12 volt power supply (DC-DC converter)Electric. transducerTravel alarmCD Player

Various optional Boom. Hyd. adjustable boom (5.1m, 16’ 9”)

Various optional Arms. Short arm (2.2m, 7’ 3”). Long arm (3.10m, 10’ 2”)

Various optional Buckets (SAE heaped). Standard bucket (0.76m3, 0.99yd3). Narrow bucket (0.39m3, 0.51yd3). Narrow bucket (0.50m3, 0.44yd3). Narrow bucket (0.64m3, 0.55yd3). Light duty bucket (0.89m3, 1.16yd3). Light duty bucket (1.05m3, 1.37yd3). Heavy duty bucket(0.69m3, 0.9yd3)

Cabin lightsCabin FOPS/FOG(ISO/DIS 10262)Cabin Roof-cover TransparentTrack shoes. Triple grousers shoe (500mm, 20”). Triple grousers shoe (700mm, 28”). Triple grousers shoe (800mm, 32”)

Lower frame under coverPre heating systemTool kitOperator suitSpecial cowl. Air vent type side doorEmergency engine control cable

Standard Equipment Optional Equipment

Robex 180LC-7

HYUNDAI CONSTRUCTION EQUIPMENT 02 / 03

NEW 7 SERIES Robex 180LC-7

A new chapter in construction equipmenthas now begun.Making the dream a reality.

Built for Maximum Power, Performance, Reliability.Built for Maximum Power, Performance, Reliability.


Technology in Cab Design

Operator’s Comfort is Foremost.Wide Cab Exceeds Industry Standards.

Visibility. Even more visibility than before, for safer, more efficient operating.

Excellent Ventilation. Ventilation has been improved by the addition of the larger fresh air intake system,

and by providing additional air flow throughout the cab.. Sliding front and side windows provide improved ventilation.. A large sunroof offers upward visibility and additional ventilation.

Comfortable Operator Environment. The control levers and seat can be adjusted to provide maximum operator comfort. . The seat is fully adjustable for optimum operating position, reducing operator

fatigue. . Console boxes slide forward and backward for improved accessibility. . The proportional pressure controls reduce unnecessary exertion while ensuring

precise operation.. Large windows allow excellent visibility in all directions.

Low noise design. The Robex 7 series was designed with low operation noise in mind.. Hyundai engineering helps to keep interior and exterior noise levels to a minimum. . The cab's noise levels have been additionally reduced by improving the door seals

for the cab and engine compartments. . An insulated diesel engine compartment with sound-damping material also reduces

noise.

TECHNOLOGY IN CAB DESIGN 04 / 05

123 NEW 7 SERIES Robex 180LC-7


Operating Environment OPERATING ENVIRONMENT 06 / 07

Minimization of Shock and Vibrationthrough Cab Mounting SystemThe application of Viscous Mounting to the cabinsupport provides the operator with a muchimproved ride. The operator work efficiency will increase as theshock and noise level in the cabin decreases.

Hot & Cool BoxThe New Cab has even more space for theoperator. An Additional storage box islocated behind operators seat, and it keepsfood and beverages cool or hot.

Rear Emergency Exit WindowRear Exit Window is designed with easy

exit foroperator's safety.

Highly Sensitive Joystick andEasy EntranceNew joystick grips for precise controlhave been equipped with doubleswitches.

(Left: Power boost / One touchdeceleration, Right: Horn/Optional)

Wide, Comfortable Operating SpaceAll the controls are designed and positioned according to the latest ergonomicresearch.Reinforced pillars have also been added for greater cab rigidity.

Smooth Travel Pedal and Foot Rests

Improved Intelligent DisplayInstrument Panel is installed in front ofRH console box. It is easy to check all critical systemswith easy-to-read indicators.

Easy-to-Reach Control PanelsSwitches and other essential controls arelocated near the operator. This helps keep operator movement to aminimum, enhancing control with lessoperator fatigue.

Wide Cab with Excellent VisibilityThe cab is roomy and ergonomicallydesigned with low noise level and goodvisibility.A full view front window and large rearand side windows provide excellentvisibility in all directions.

Remote Radio Control andDeluxe Cassette

Rise-up Wiper and Cabin LightsRaise-up wiper has enhanced for thebetter front view. Cabin Lights enhancessafety by brightly lighting thesurroundings during night work(optional)


CAB

CAB

The best working conditions in a pleasant environment.

Advanced CAPO SystemThe Advanced CAPO(Computer Aided PowerOptimization) system maintains engine andmutual pump power at optimum levels. Modeselections are designed for various workloads and maintaining high performancewhile reducing fuel consumption. Features such as auto deceleration and powerboost are included in the system. The system monitors engine speed, coolanttemperature, and hydraulic oil temperature.Contained within the system are selfdiagnostic capabilities which are displayed byerror codes on the cluster.

Self Diagnosis SystemThe CPU controller diagnoses problems in theCAPO system caused by electric andhydraulic malfunctions and displays them onthe LCD monitor of the cluster through errorcodes. This controller has the capacity toidentify 48 distinct types of errors. As theinformation from this device, such as enginerpm, main pump delivery pressure, batteryvoltage, hyd. temperature, and the state of alltypes of electric switches, provides theoperator with a much more exact state ofmachine operating condition. This makes the machine easier totroubleshoot when anything does go wrong.

Arm Flow Regeneration SystemArm flow regeneration valve provides smootharm-in operation without cavitation.

Boom & Arm Holding System The Holding valves in the main control valveprevents the boom & arm from dropping overan extended period in neutral position.

Auto Deceleration SystemWhen remote-control valves are in neutralposition more than 4 seconds, CPU controllerinstructs the accel actuator to reduce enginespeed to 1,200rpm. This decreases fuelconsumption and reduced cab noise levels.

One Touch Decel SystemWhen the one touch decel switch is pressed,CPU controller controls the accel actuator toreduce engine speed to 950 rpm. And thenthe one touch decel switch is pressed again,the engine speed recovers.

Max. Flow Cut-off SystemFor precise control and finishing work, theMax. Flow Cut-off System reduces pumpflow, thus allowing smooth operation.


Advanced Hydraulic System Increased Higher Performance 08 / 09

Track Rail Guide & AdjustersDurable track rail guides keep track links in place. Track adjustment is made easy withstandard grease cylinder track adjusters and shock absorbing springs.

Automatic Engine Overheat PreventionIf the engine coolant temperature gets toohigh, the CPU controller lowers the enginespeed and cools the engine.

Anti Restart SystemThe new system protects the starter fromrestarting during engine operation, even if theoperator accidentally turns the start key again.

Power boost control SystemWhen the power boost system is activated,digging power increases about 10%. It isespecially useful when extra power istemporarily needed, for instance, whendigging hard earth and rock, or if the bucketteeth are stopped by a stubborn tree root.

Automatic Warming-up SystemAfter the engine is started, if the enginecoolant temperature is low, the CPUcontroller increases the engine speed andautomatically increases the pump flow rate towarm up the engine more effectively.

Pump Flow Control SystemIn neutral position: Pump flow is reduced to aminimum to eliminate power loss. In operation: Maximum pump flow is deliveredto the actuator to increase the speed. Withmovement of the control lever, pump flow isautomatically adjusted and the actuator speedcan be proportionally controlled.

Hydraulic Damper in Travel PedalImproved travel control ability & feeling byshock reducing when starting and stopping.

Drive signal

Main control valve

Main reliefvalve

solenoid valve

Travel speedsolenoid valve

Engine speedsensor

Main pump

Pilot pump

EPPR valve

Drive signalDrive signal

ProlixResistor

Drive signal

Pressure switch signal

P M

Engine

Fuel injectionpump

Accelactuator

Power boostbutton

Hyd tempsensor

LH controllever

Serial Communication(-)

Cluster

Serial Communication(+)

Coolant temperature signal

Mot

or d

rive

sign

al

Pote

ntio

met

er si

gnal

Engi

ne s

peed

sen

sor s

igna

l

Auto deceleration pressure switch

Hyd temperature signal

Accel dial

Extra B(Dozer)Arm 1

Boom 2S/Priority

Swing

Bucket

Arm 2

Extra A &Arm regen

Boom 1

Travel(LH)

Max flow COsolenoid valve

Max flowCO valve

Drive signalRH controllever

Optionbutton

One touchdecel button

Accel dial signal

signalsignal

CPU controller

Coolanttemp sensor

Extra C

Travel(RH)StraightTravel

Horn

P1 P2

NormalEmergency(optional)

Transmission

Battery

Power boost

Sol.ValveArm Regen.Co.

ADVANCED CAPO SYSTEM

Strong and Stable Lower FrameReinforced box-section frame is all welded, low-stress, high-strength steel. It guarantees safety and resistance against external impact when driving on rough groundand working on wet sites through high tensile strength steel panels, with highly durableupper and lower rollers and track guards.Long undercarriage incorporates heavy duty excavator style components.X-leg type center frame is integrally welded for maximum strength and durability.

Powerful and PreciserSwing ControlImproved shock absorbingcharacteristics make stopping aprecise and smooth action

POWER MODEH mode: High power S mode: Standard powerWORK MODE

: Heavy duty work: General work: Breaker

USER MODEM mode: Maximum PowerU mode: Memorizing Operator’s Preferable Power Setting

NEW MODE CONTROL SYSTEMMitsubishi S6S-DT ENGINEThe six cylinders turbo-charged and chargedair cooled, engine is built for power, reliabilityand economy. This engine meets EPA tier IIand EU stage II emission regulation.

Reliability You Can Depend OnMitsubishi S6S-DT engine is ideal solutionfor the toughest work environment.The engine is built from a cast iron, skirtedblock with main bearing support betweeneach cylinder. This combination providesmaximum strength, rigidity, and crankshaftsupport. Special liquid cooling results inuniform temperature distribution.

Compact Engine SizeThe compact size of the engine makes iteasier to service than other engines.The low engine height allows easy access formaintenance due to a side-mounted, gear-driven camshaft.

Reinforced Bucket and BucketLinkageSealed and adjustable bucket linkage providesless wear of pins and bushes as well as silent operation.The design includesbucket link durability and anti wearcharacteristics. Additional reinforcementplates on cutting edge section. Reinforcedbucket is made with thicker steel andadditional lateral plate.

Reliability & Serviceability RELIABILITY & SERVICEABILITY 10 / 11


Centralized Electric Control Box andEasy Change Air Cleaner AssemblyElectric control box and Air cleaner are centralized in one or the samecompartment for easy service.

Easy to maintain engine componentsThe cooling and preheating system are provided foroptimum and immediate operation, guaranteeing longer lifefor the engine and hydraulic components. Servicing of the engine and hydraulics is considerablysimplified due to total accessibility.

Large tool box for extra storage

Durability of structure proven throughFEM(Finite Element Method) analysis

and long term durability test.Full open doors and master key system provide easy access for servicing.Handrails and foot steps are applied for safety

Side Cover with Left & Right Swing Open TypeEasy access to vital components gives unrestricted view ofcomponent allows easy maintenance and repair.

Highly efficient Hydraulic PumpPump output and Hydraulic tank capacityhave been increased.A pilot pump has been installed resultingin improved control sensitivity.


500 (20”)

700 (28”)

800 (32”)

600 (24”)


Specifications Backhoe attachment 12 / 13

Engine

Water cooled, 4 cycle diesel, 6-cylindersin line, direct injection turbocharged andcharge air cooled

126 HP (94 kW) at 2,100 rpm116 HP (87 kW) at 2,100 rpm128 PS (94 kW) at 2,100 rpm118 PS (87 kW) at 2,100 rpm42.5 kgf.m(307 lbf.ft) at 1,500 rpm94 x 120 mm (3.70” x 4.72”)4,996 cc (305 in3)2 x 12 V x 100 AH24 V- 5.0kW24V-50 Amp

Type

Ratedflywheelhorsepower

Max. torqueBore x strokePistonBatteriesStarting motorAlternator

J1995 (gross)J1349 (net)6271/1 (gross)6271/1 (net)

SAE

DIN

Buckets

Arms

Model Mitsubishi S6S-DT

Swing system

Swing motorSwing reductionSwing bearing lubricationSwing brakeSwing speed

Axial piston motorPlanetary gear reductionGrease-bathedWet multi-disc12.0 rpm

Coolant & Lubricant capacity

(refilling)Fuel tankEngine coolant Engine oilSwing device-gear oilFinal drive(each)-gear oilHydraulic system(including tank)Hydraulic tank

liter260.0

3016.5

55.4240160

US gal68.77.94.41.31.463.442.3

UK gal57.26.63.61.11.252.835.2

Undercarriage

Center frameTrack frameNo. of shoes on each sideNo. of carrier roller on each sideNo. of track roller on each sideNo. of rail guides on each side

X - leg typePentagonal box type

51282

Drives & Brakes

Drive methodDrive motorReduction systemMax. drawbar pullMax. travel speed(high) / (low)GradeabilityParking brake

Pilot operated joysticks and pedals easy and fatigueless operation.

X-leg type center frame is integrally welded with reinforced box-section track frames. The undercarriage includes lubricated rollers,idlers, track adjusters with shock absorbing spring sprockets, andtrack chain with triple grouser shoes.

Operating weight (approximate)

Major component weight4,530kg (9,900 lb)2,950kg (6,500 lb)1,250kg (2,760 lb)1,780kg (3,920 lb)

UpperstructureCounterweight5.1m (16’ 9”)mono boom(with arm cylinder)Hydraulic adjustable boom(with arm cylinder)

Operating weight, including 5.1m (16’ 9”) mono boom, 2.6m (8’ 6”) arm, SAE heaped 0.76 m3 (0.99 yd3) backhoe bucket,lubricant, coolant, full fuel tank, hydraulic tank and the standardequipment.

Hydraulic system

Two variable displacement piston pumps2 x 168 /min (44.4 US gpm / 37.0 UK gpm)Gear pump

Two speed axial piston motorwith brake valve and parking brake

Axial piston motor with automatic brake

330 kgf/cm2 (4,690 psi)330 kgf/cm2 (4,690 psi)360 kgf/cm2 (5,120 psi)240 kgf/cm2 (3,410 psi)35 kgf/cm2 (500 psi)Installed

Boom : 2-115 X 80 X 1,090 mm (4.5” X 3.1” X 42.9”)Arm : 1-120 X 85 X 1,340 mm (4.7” X 3.3” X 52.8”)Bucket : 1-115 X 80 X 950 mm (4.5” X 3.1” X 37.4”)Blade : 2-110 X 75 X 320 mm (4.3” X 3.0” X 12.6”)

2-PCS1st : 2-115 X 80 X 960 mm (4.5” X 3.1” X 37.8”)2nd : 1-160 X 5 X 650 mm (6.3” X 3.7” X 25.6”)

TypeRated flowSub-pump for pilot circuitCross-sensing and fuel saving pump system

Travel

Swing

Implement circuitsTravelPower boost (boom, arm, bucket)Swing circuitPilot circuitService valve

No. of cylinder-bore x rod x stroke

Main pump

Hydraulic motors

Relief valve setting

Hydraulic cylinders

Fully hydrostatic typeAxial piston motor, in-shoe designRV gear17,000 kgf (37,500 lbf)5.2 km/hr (3.2 mph) / 3.3 km/hr (2.1 mph)30o(58 %)Wet multi-disc

Traveling and steeringEngine throttleLights

Pilot control Two joysticks with one safety lever(LH): Swing and arm, (RH): Boom and bucket(ISO)

Two levers with pedalsElectric, Accel Dial SwitchTwo lights mounted on the boom one in the tool box

Control

0.39 (0.51) 0.50 (0.65) 0.64 (0.84) 0.76 (0.99) 0.89 (1.16) 1.05(1.37) 0.69(0.90)

SAE heaped m3 (yd3)

SAE heaped 2.2(7’ 3”)Arm

Weight kg(lb)Width mm (in)

Boom

CECE heaped Without side cutters With side cutters

Capacity m3 (yd3)Recommendation m(ft.in)

: Standard backhoe bucket: Heavy duty bucket

: Applicable for materials with density of 2,000 kg / m3 (3,370 lb/ yd3) or less: Applicable for materials with density of 1,600 kg / m3 (2,700 lb/ yd3) or less: Applicable for materials with density of 1,100 kg / m3 (1,850 lb/ yd3) or less

5.1 (16’ 9”) 5.1 (16’ 9”) Hydraulic adjustable boom

0.39(0.51)0.50(0.65)0.64(0.84)0.76(0.99)0.89(1.16)1.05(1.37)0.69(0.90)

0.34(0.44)0.44(0.58)0.55(0.72)0.65(0.85)0.77(1.01)0.90(1.18)0.62(0.81)

620(24.4)760(29.9)920(36.2)

1,060(41.7)1,220(48.0)1,400(55.1)990(39.0)

740(29.1)880(34.6)

1,040(40.9)1,180(46.5)1,340(52.8)1,520(59.8)

-

410(900)470(1,040)510(1,120)570(1,260)610(1,340)680(1,500)700(1,540)

2.6(8’ 6”)

3.1(10’ 2”)

2.2(7’ 3”)

2.6(8’ 6”)

Boom and arms are of all-welded, low-stress, full-box section design. 5.1m(16’ 9”) mono boom, 5.1m(16’ 9”) hydraulic adjustable boom and 2.20m(7’ 3”), 2.60m(8’ 6”), 3.10m(10’ 2”) arms are available. Buckets are all-welded, high-strength steel implements.

2.60 (8’ 6”)

810 (1790)

2.20 (7’ 3”)

750 (1560)

Bucket digging force

Arm crowdforce

108.6 [118.4]11,070 [12,080]24,410 [26,630]

124.5 [135.9]12,700 [13,850]28,000 [30,550]

85.2 [93.0]8,690 [9,480]

19,160 [20,900]

89.0 [97.1]9,080 [9,910]

20,020 [21,840]

3.10 (10’ 2”)

890 (1960)

108.6 [118.4]11,070 [12,080]24,410 [26,630]

124.5 [135.9]12,700 [13,850]28,000 [30,550]

67.4 [73.5]6,870 [7,490]

15,150 [16,530]

69.4 [75.7]7,080 [7,720]

15,610 [17,030]

108.6 [118.4]11,070 [12,080]24,410 [26,630]

124.5 [135.9]12,700 [13,850]28,000 [30,550]

75.0 [81.8]7,650 [8,350]

16,870 [18,400]

77.6 [84.6]7,910[8,630]

17,440 [19,030]

Note : Arm weight including bucket cylinder and linkage. Standard arm

Arm Length

Weight

m(ft.in)

kg(lb)

kNkgflbf

kNkgflbf

kNkgflbf

kNkgflbf

SAE

ISO

SAE

ISO

Remark

[ ]:Power Boost

2.60m (8’ 6”) 3.10m (10’ 2”)2.20m (7’ 3”)

Digging force

Shoes(Triple grouser) Operating weight Ground pressuremm (in) kg (lb) kgf/cm2 (psi)

17,950(39,580)

19,010(41,910)

18,200(40,120)

19,260(42,460)

18,450(40,680)

19,510(43,010)

18,700(41,230)

19,770(43,580)

180LC-7

180LCD-7

180LC-7

180LCD-7

180LC-7

180LCD-7

180LC-7

180LCD-7

0.49(6.97)

0.52(7.39)

0.42(5.97)

0.44(6.26)

0.36(5.12)

0.38(5.40)

0.32(4.55)

0.34(4.83)

Standard equipment

Operating weight

Shoes(Triple grouser) Operating weight Ground pressuremm (in) kg (lb) kgf/cm2 (psi)

Operating weight

Dimensions & Working ranges

Dimensions R180LC-7 Mono boom

Working ranges

B

C

D

D’

E

F

G

H

A Tumbler distance

Overall length of crawler

Ground clearance of counterweight

Tail swing radius

Rear-end length

Overall width of upperstructure

Overall height of cab

Min. ground clearance

Track gauge

4,190 (13’ 9”)

1,050 (3’ 5”)

2,530 (8’ 4”)

2,480 (8’ 2”)

2,475 (8’ 1”)

2,915 (9’ 7”)

460 (1’ 6”)

2,250 (7’ 5”)

3,360 (11’ 0”)

mm (ft . in)

I

J

K

L

Boom length

Arm length2,200(7’ 3”)

5,100 (16’ 9”)

5,100 (16’ 9”)

8,620(28’ 3”)

2,960(9’ 9”)

2,600(8’ 6)

8,600(28’ 3”)

2,910(9’ 7”)

3,100(10’ 2”)

8,600(28’ 3”)

3,090(10’ 2”)

500(20”)

2,750(9’ 1”)

600(24”)

2,850(9’ 5”)

700(28”)

2,950(9’ 9”)

800(32”)

3,050(10’ 1”)

Overall length

Overallheight of boom

mm (ft . in)

Track shoewidth

Overall width

Standard equipment

Standard equipment

A

A’

B

B’

C

D

E

F

Boom length


8,690(28’ 6”)

8,530(27’ 12”)

5,660(18’ 7”)

5,440(17’ 10”)

5,140(16’ 10”)

8,740(28’ 8”)

6,100(20’ 0”)

3,180(10’ 5”)

2,600(8’ 6”)

9,030(29’ 8”)

8,870(29’ 1”)

6,060(19’ 11”)

5,860(19’ 3”)

5,440(17’ 10”)

8,870(29’ 1”)

6,240(20’ 6”)

3,170(10’ 5”)

3,100(10’ 2”)

9,450(31’ 0”)

9,300(30’ 6”)

6,560(21’ 6”)

6,370(20’ 11”)

5,730(18’ 10”)

8,970(29’ 5”)

6,380(20’ 11”)

3,180(10’ 5”)

Max. diggingreach

Max. diggingreach on ground

mm (ft . in)

Max. diggingdepth

Max. digging depth(8' level)

Max. vertical walldigging depth

Max. diggingheight

Max. dumpingheight

Min. swingradius

14 / 15

Dimensions R180LC-7 Hydraulic adjustable boom

Working ranges

B

C

D

D’

E

F

G

H

A Tumbler distance



Tail swing radius

Rear-end length




Track gauge

4,190 (13’ 9”)

1,050 (3’ 5”)

2,530 (8’ 4”)

2,480 (8’ 2”)

2,475 (8’ 1”)

2,915 (9’ 7”)

460 (1’ 6”)

2,250 (7’ 5”)

3,360 (11’ 0”)

mm (ft . in)

I

J

K

L

Boom length

Arm length

5,100 (16’ 9”)

5,100 (16’ 9”)

2,200(7’ 3”)

8,580(28’ 2”)

3,040(9’ 12”)

2,600(8’ 6”)

8,570(28’ 1”)

3,050(10’ 0”)

500(20”)

2,750(9’ 1”)

700(28”)

2,950(9’ 9”)

800(32”)

3,050(10’ 1”)

600(24”)

2,850(9’ 5”)

Overall length


mm (ft . in)

Track shoewidth

Overall width

A

A’

B

B’

C

D

E

F

Boom length


8,750(28’ 8”)

8,600(28’ 3”)

5,460(17’ 11”)

5,350(17’ 7”)

4,670(15’ 4”)

9,390(30’ 10”)

6,680(21’ 11”)

3,130(10’ 3”)

2,600(8’ 6”)

9,110(29’ 11”)

8,960(29’ 5”)

5,830(19’ 2”)

5,750(18’ 10”)

5,030(16’ 6”)

9,600(31’ 6”)

6,900(22’ 8”)

2,970(9’ 9”)

Max. diggingreach


mm (ft . in)

Max. diggingdepth



Max. diggingheight

Max. dumpingheight

Min. swingradius


Dimensions & Working ranges

7.5 m25.0 ft6.0 m20.0 ft4.5 m15.0 ft3.0 m10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft

kglbkglbkglbkglbkglbkglbkglbkglbkglb

*6630*14620*10580*23320

*6630*14620*10580*23320

*8440*18610

*6730*14840*10510*23170

*8940*19710

*5810*12810

*8440*18610

*6730*14840

938020680*8940

*19710*5810

*12810

*4240*9350*5370

*11840*6520

*14370*7130

*15720*7050

*15540*6190

*13650

*4240*9350*5370

*118405100

112404870

107404810

106004870

10740

*3800*8380*4250*9370*4780

*10540*5110

*11270*5050

*11130

3590791034507610329072503170699031206880

*3380*7450*3320*7320*3340*7360323071203160697033107300

*3580*7890*3360*7410

*3380*745027306020223049202010443019504300203044802330514030906810

5.81(19.1)7.16

(23.5)7.92

(26.0)8.30

(27.2)8.34

(27.4)8.06

(26.4)7.42

(24.3)6.28

(20.6)

Lifting Capacities

Lifting capacities R180LC-7 Mono boom

NOTES 1. Lifting capacity is based on SAE J1097, ISO 10567.2. Lifting capacity of the Robex Series does not exceed 75% of tipping load

with the machine on firm, level ground or 87% of full hydraulic capacity.

3. The load point is a hook (standard equipment) located on the back of the bucket.4. (*) indicates load limited by hydraulic capacity.

Rating over-side or 360 degreeRating over-front

*6320*13930

*9350*20610

*6320*13930

*9350*20610

*7340*16180

*7700*16980

*7450*16420*10020*22090

*9550*21050

*6930*15280

*7340*16180

*7700*16980

*7450*16420

9260204109390

20700*6930

*15280

*4920*10850

*6170*13600

*6950*15320

*7070*15590

*6450*14220

*4590*10120

*4920*10850

512011290

485010690

474010450

477010520*4590

*10120

*2730*6020*3480*7670*3970*8750*4550

*10030*4980

*10980*5050

*11130*4500*9920

*2730*6020*3480*76703460763032807230313069003060675030906810

*2540*5600*3320*7320*3150*6940

234051602270500022004850

*3060*6750*3040*6700*3090*6810301066402940648030506720

*3430*7560*3350*7390

*3060*675024805470205045201850408017903950186041002100463027005950

6.33(20.8)7.56

(24.8)8.28

(27.2)8.64

(28.3)8.68

(28.5)8.42

(27.6)7.81

(25.6)6.75

(22.1)

Load radiusLoad point

heightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)


GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft


6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

*5980*13180

*8450*18630*11670*25730

*5980*13180

*8450*18630*11670*25730

*9480*20900

*8230*18140

*9760*21520*10130*22330

*8010*17660

*9480*20900

*8230*18140

9120201109180

20240*8010

*17660

*4350*9590*5700

*12570*6680

*14730*7020

*15480*6670

*14700*5360

*11820

*4350*95905150

113504820

106304670

103004650

102504770

10520

*2620*5780*3090*6810*3620*7980*4260*9390*4790

*105604890

10780*4720

*10410

*2620*5780*3090*68103460763032607190309068102990659029806570

*1910*4210*2820*6220*3540*780034907690

*2950*6500

*1910*421023305140224049402150474021104650

*2700*5950*2730*6020*2800*617026905930262057802710597030006610

*3270*7210

*2700*595022004850184040601660366016103550166036601850408023005070

6.92(22.7)8.05

(26.4)8.73

(28.6)9.06

(29.7)9.10

(29.9)8.85

(29.0)8.28

(27.2)7.30

(24.0)


heightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)


GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft



Reach

m(ft)

Boom : 5.10 m (16’ 9”) Arm : 2.20 m (7’ 3”) Bucket : 0.76 m3 (0.99 yd3) SAE heaped Shoe : 600 mm(24”) triple grouser with 2,950 kg (6,500 lb) CWT


heightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)

16 LIFTING CAPACITIES 17

Dimensions R180LCD-7

Working ranges

I

J

K

L

Boom length


5,100 (16’ 9”)

5,100 (16’ 9”)

9,010(29’ 7”)

2,960(9’ 9”)

2,600(8’ 6)

8,990(29’ 6”)

2,910(9’ 7”)

3,100(10’ 2”)

8,990(29’ 6”)

3,090(10’ 2”)

500(20”)

2,750(9’ 1”)

600(24”)

2,850(9’ 5”)

700(28”)

2,950(9’ 9”)

800(32”)

3,050(10’ 1”)

Overall length


mm (ft . in)

Track shoewidth

Overall width

Standard equipment

Standard equipment

A

A’

B

B’

C

D

E

F

Boom length


8,690(28’ 6”)

8,530(27’ 12”)

5,660(18’ 7”)

5,440(17’ 10”)

5,140(16’ 10”)

8,740(28’ 8”)

6,100(20’ 0”)

3,180(10’ 5”)

2,600(8’ 6”)

9,030(29’ 8”)

8,870(29’ 1”)

6,060(19’ 11”)

5,860(19’ 3”)

5,440(17’ 10”)

8,870(29’ 1”)

6,240(20’ 6”)

3,170(10’ 5”)

3,100(10’ 2”)

9,450(31’ 0”)

9,300(30’ 6”)

6,560(21’ 6”)

6,370(20’ 11”)

5,730(18’ 10”)

8,970(29’ 5”)

6,380(20’ 11”)

3,180(10’ 5”)

Max. diggingreach


mm (ft . in)

Max. diggingdepth



Max. diggingheight

Max. dumpingheight

Min. swingradius

B

C

D

D’

E

F

G

H

M

N

O

A Tumbler distance



Tail swing radius

Rear-end length




Track gauge

Ground clearance of blade up

Depth of blade down

Height of blade

Width of blade

3,360 (11’ 0”)

4,190 (13’ 9”)

1,050 (3’ 5”)

2,530 (8’ 4”)

2,480 (8’ 2”)

2,475 (8’ 1”)

2,915 (9’ 7”)

460 (1’ 6”)

2,250 (7’ 5”)

780 (2’ 7”)

520 (1’ 8”)

645 (2’ 1”)

2,850 (9’ 4”)

mm (ft . in)




Lifting capacities R180LC-7 Hydraulic adjustable boom





LIFTING CAPACITIES 18 / 19


*5710*12590

*8910*19640

*5710*12590*8910

*19640

*6670*14700

*6670*14700

*9370*20660

*9130*20130

*6310*13910

*6670*14700

*6670*14700

922020330*9130

*20130*6310

*13910

*6150*13560

*6860*15120

*6910*15230

*6210*13690

*4190*9240

511011270

482010630

471010380

475010470

41909240

*3990*8800*4530*9990*4910

*10820*4940

*10890*4310*9500

3460763032607190311068603040670030806790

*3100*6830*3090*6810

297065502900639030206660

*3180*7010*2940*6480

24105310200044101800397017403840182040102060454026405820

*2920*6440*3680*811036308000

233051402250496021904830

7.66(25.1)8.37

(27.5)8.72

(28.6)8.77

(28.8)8.50

(27.9)7.90

(25.9)6.86

(22.5)


heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft

kglbkglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

*5870*12940

*5870*12940

*5880*12960

*9760*21520

*8470*18670

*5880*12960

934020590*8470

*18670

*5410*11930

*6470*14260

*7010*15450

*6870*15150

*5920*13050

*5410*11930

508011200

484010670

478010540

486010710

*3840*8470*4260*9390*4740

*10450*5030

*11090*4920

*10850

3600794034507610327072103140692031006830

*3220*7100

22705000

*3370*7430*3340*7360

320070503140692032907250

*3320*7320*2910*6420

267058902180481019604320190041902000441022905050

*2910*6420

7.24(23.8)7.99

(36.2)8.36

(27.4)8.41

(27.6)8.13

(26.7)7.50

(24.6)6.37

(20.9)


heightm(ft)

3.0 m(10.0 ft)1.5 m(5.0 ft)

6.0 m20.0 ft4.5 m15.0 ft3.0m

10.0 ft1.5 m5.0 ft

GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft

kglbkglbkglbkglbkglbkglbkglb

4.5 m(15.0 ft) 6.0 m(20.0 ft) 7.5 m(25.0 ft) CapacityAt max. reach

Reach

m(ft)

CERES SYSTEMCERES(Construction Equipment Resource Support)is HHI’s new information system on all HyundaiConstruction equipment’s products for all overseascustomer, dealer and branch office.

http://ceres.hhi.co.kr


GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft


*6630*14620*10580*23320

*6630*14620*10580*23320

*8440*18610

*6730*14840*10510*23170

*8940*19710

*5810*12810

*8440*18610

*6730*14840

992021870*8940

*19710*5810

*12810

*4240*9350*5370

*11840*6520

*14370*7130

*15720*7050

*15540*6190

*13650

*4240*9350*5370

*118405390

118805170

114405100

112405160

11380

*3800*8380*4250*9370*4780

*10540*5110

*11270*5050

*11130

3790836036508050349076903370743033207320

*3380*7450*3320*7320*3340*7360*3410*7520*3520*7720*3570*7870*3580*7890*3360*7410

*3380*745029006390238052502140472020804590217047802490549032807230

5.81(19.1)7.16

(23.5)7.92

(26.0)8.30

(27.2)8.34

(27.4)8.06

(26.4)7.42

(24.3)6.28

(20.6)

Lifting Capacities

Lifting capacities R180LCD-7





*6320*13930

*9350*20610

*6320*13930

*9350*20610

*7340*16180

*7700*16980

*7450*16420*10020*22090

*9550*21050

*6930*15280

*7340*16180

*7700*16980

*7450*16420

980021610*9550

*21050*6930

*15280

*4920*10850

*6170*13600

*6950*15320

*7070*15590

*6450*14220

*4590*10120

*4920*10850

541011930

514011330

504011110

506011160*4590

*10120

*2730*6020*3480*7670*3970*8750*4550

*10030*4980

*10980*5050

*11130*4500*9920

*2730*6020*3480*76703660807034807670333073403260719032907250

*2540*5600*3320*7320*3150*6940

250055102420534023605200

*3060*6750*3040*6700*3090*6810*3170*6990*3270*7210*3370*7430*3430*7560*3350*7390

*3060*675026305800219048301980437019204230199043902250496028706330

6.33(20.8)7.56

(24.8)8.28

(27.2)8.64

(28.3)8.68

(28.5)8.42

(27.6)7.81

(25.6)6.75

(22.1)


heightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)


GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft



Reach

m(ft)

*5980*13180

*8450*18630*11670*25730

*5980*13180

*8450*18630*11670*25730

*9480*20900

*8230*18140

*9760*21520*10130*22330

*8010*17660

*9480*20900

*8230*18140

9650212709710

21410*8010

*17660

*4350*9590*5700

*12570*6680

*14730*7020

*15480*6670

*14700*5360

*11820

*4350*95905440

119905120

112904960

109304940

108905060

11160

*2620*5780*3090*6810*3620*7980*4260*9390*4790

*10560*5000

*11020*4720

*10410

*2620*5780*3090*68103620798034607630329072503190703031807010

*1910*4210*2820*6220*3540*7800*3770*8310*2950*6500

*1910*421024805470239052702310509022604980

*2700*5950*2730*6020*2800*6170*2890*6370*3010*6640*3120*6880*3230*7120*3270*7210

*2700*595023405160197043401790395017303810178039201980437024605420

6.92(22.7)8.05

(26.4)8.73

(28.6)9.06

(29.7)9.10

(29.9)8.85

(29.0)8.28

(27.2)7.30

(24.0)


heightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft)


GroundLine

-1.5 m-5.0 ft-3.0 m-10.0 ft-4.5 m-15.0 ft



Reach

m(ft)


heightm(ft)

4.5 m(15.0 ft)3.0 m(10.0 ft)1.5 m(5.0 ft) 6.0 m(20.0 ft) CapacityAt max. reach

Reach

m(ft)






standard equipment optional equipment hyundai models...standard and optional equipment may vary....

Documents