start technologyecolutionproduct overview luxcontrol lighting management systems technology provide...

START

luxCONTROL Lighting management systems

TECHNOLOGY ECOLUTIONPRODUCT OVERVIEW

Technology

Provide the basis for extremely energy-efficient lighting solutions Increase flexibility and individuality Create an individual level of lighting comfort that promotes a feeling of well-being Can react automatically to ambient influences in combination with sensors or control systems Pave the way for innovative lighting concepts Give rooms an aesthetic appearance Enhance safety and reliability through status checks and visualisation options Reduce maintenance costs through automatic tests and information feedback

START


TECHNOLOGY ECOLUTIONPRODUCT OVERVIEW

Technology

luxCONTROL from Tridonic means... Tailor-made systems from ballasts to controllers From individual intelligent luminaires through large room installations to extensive lighting concepts Lighting control with integrated emergency lighting Broad range of products and functions Simple operation (Touchpanel) 20 years of experience in controlling digital dimmable ballasts

STARTTECHNOLOGY ECOLUTIONPRODUCT OVERVIEW


luxCONTROL – Lighting management systems

* Functions already integrated in ECGs

Emergency lighting solutionsSeparate (central) solutionsIntegrated solutions

SMART basicDIM e-touchproDIMcomfortDIMmodularDIM

Ease of operation

Maintenance management

DSI DALI

High energy efficiency

plugADDRESSING*corridorFUNCTION*



SMART

The simplest way to make intelligent energy savings A light sensor is connected directly to the ballast No additional controllers are required The basic light level can be set on the sensor The desired light value can be changed via switchDIM Each luminaire is individually controlled Maximum freedom of design thanks to compact construction and different fixing options Up to 30 % cost savings Up to 60 % savings operating in combination with a presence sensor



SMART

smart LS (until 2011)

Daylight sensor for cost-effective constant lighting For PCA ECO and PCA EXCELL one4all

SMART DL (for PCA from 2011)

New optimised casing For luminaire installation

SMART DL PD (for PCA EXCEL one4all from 2011)

Combined daylight and presence sensor Available for mounting heights of five and ten

metres



SMART

Attractive design Cover frames for casing installation

For mounting Simple mounting of the sensors



basicDIM

smartSWITCH – The ideal addition for standard ECGs Compact switch with motion sensor and light sensor

for bright-out Ideal for intelligent luminaires Luminaire installation module For a maximum of 2 ECGs (300 VA) Adjustable switch-off delay (50 s – 30 min) Bright-out function (50 – 2000 lx) Simple control of the corridorFUNCTION

e.g. PC PRO T5e.g. PC PRO T5



basicDIM

smartDIM SM lp – Intelligent lighting control Compact control module with inputs for light

sensor / motion sensor and switch Luminaire installation module Switch input suitable for mains voltage Low standby losses for min. energy standard Up to 25 DSI ballasts can be connected 16 available presets

Two sensor versions



basicDIM

DSI-SMART PTM Sensor and controller with remote control and

switch input Lighting control Presence detection IR remote control Configurable IR programmer Switch input 3 casing types for recessed and surface mounting For 4 DSI ballasts (25 for remote ceiling)

DSI-SMART PTM integrated

smartController

DSI-SMART PTMremote surface

DSI-SMART PTMremote ceiling

smartProgrammer



basicDIM

basicDIM RCL Digital control module with ambient light sensor and

motion detector (PIR) Linked PIR solution for a maximum of

20 independently regulable light strips Compact solution for integration into luminaire

(control module and sensor) Simple installation (floating pushbutton input) Up to 25 DSI or 10 DALI ballasts connectable per

control module



basicDIM Example

basicDIM RCL Classroom:

2 light strips with 2 smartDIM sensors each



Presence and motion detectors cover the complete room area



Presence and motion detectors cover the complete room area

Connected via Link Line:Automatic “Light off” only in empty room



basicDIM

basicDIM RCL Independently regulable light

strips (close / distant to the window)

Maximum energy savings at ideally regulated light power

Connection of two (maximum twenty) independent systemsvia Link Line for presence detection



Occupied classroom



People leave classroom



Delay time activated At the end of the delay time,

luminaires are first dimmed to low light level



Lights are automatically switched off



Functionality Product characteristicsmodular

DIM BasicmodularDIM SC

modularDIM LC

modularDIM DM,

Sensor DL

Possible energy savings with modularDIM

Manual dimming Users set the lighting level manually ▼ up to -25 %

Presence controlLighting automatically switched on if people in room

▼ optional optional

up to -50 %

Scene controlDifferent lighting scenes are assigned to the different functions of a room

▼ ▼

Daylight controlConstant lighting control. Users can adjust the lighting level at any time

▼ optional ▼ up to -60 %

Manual dimming, daylight-dependent and presence-dependent light

Combination of daylight control and presence control for maximum efficiency

▼ optional ▼ ▼ up to -80 %

Impressive energy savings

modularDIM solutions



modularDIM

modularDIM – user-friendly, efficient, flexible and expandable Basic module for 3 groups and motion sensors Expansion module for scene control Expansion module for daylight control Use of standard switches for dimming and switching Any number of switches can be connected in

parallel

I II IIIIX

...intellig

ent exten

sion

modularDIM overview



modularDIM Basic Basic control unit for manual dimming and switching

of 3 channels Parallel connection of multiple switches and floating

presence sensors One output channel can control up to 100 DSI

ballasts The basic unit is also the central power supply for

all modularDIM components

modularDIM

modularDIM application graphics modularDIM overview



modularDIM SC Expansion module for programming and retrieving

up to 4 lighting sequences with conventional switches (SELV)

modularDIM




modularDIM LC Expansion module for connecting non-floating

switches and conventional motion sensors

modularDIM




modularDIM DM Expansion module for daylight-dependent

programming of up to 3 DSI groups

modularDIM Sensor DAYLIGHT Ceiling sensor for detecting daylight in conjunction

with the modularDIM DM expansion module

modularDIM




FunctionalityDALI

PS1/PS2DALI

GC/SCDALI MC

DALI SQM

DALITOUCHPANEL

DALI x-touch

PANEL/BOX

DALI MSensorDALI RC

Scalable comfort for any application

Manual group / scene control ▼ ▼

Multi-functional control ▼ ▼ ▼

Automatic scene control (sequence)

▼ ▼

Automatic daylight and presence control

▼ optional ▼

Convenient operation and programming

optional optional optional optional ▼ optional

Comfortable configuration with a PC

▼ ▼ ▼ ▼ COMFORT +

Maximum convenience

comfortDIM



comfortDIM

DALI PS1 / PS2 Central DALI supply unit Available for installation in switching cabinets (PS 2)

or in surface-mounted housings (PS 1) 200 mA PS1 / 240 mA PS2

comfortDIM overview



comfortDIM

DALI PS2 Standby Maximum reduction of standby losses from DALI devices DALI PS with intelligent bus monitoring Automatically switches off the power supply to the

DALI ECGs via an external contactor Restarts the ECGs and establishes the required

operating state Parameters can be set with configTOOL

comfortDIM overview



DALI GC Group controller for controlling two DALI lighting

groups On/off switching plus dimming Start-up of small installations possible Group number can be set via rotary selector switch

DALI SC Scene controller for programming and retrieving up

to four DALI lighting scenes Scene number can be set via rotary selector switch

comfortDIM

comfortDIM overview



DALI MC Multi-controller for manual control of lighting groups,

scenes or DALI addresses 4 individually configurable switch inputs The function can be set individually Sequencer for automatic retrieval of up to 4 scenes Configurable power-up mode, e.g. Off or Scene

recall Configuration with configTOOL software

comfortDIM

comfortDIM overview



DALI SQM Sequencer module (SQM) for automatic retrieval of

up to 16 scenes Start / stop via switch input Scene selector switch and interval duration can be

set on the device

comfortDIM

comfortDIM overview



DALI Touchpanel Panel with freely selectable functions For manual control of lighting groups and lighting

scenes Programming with free configTOOL software

comfortDIM

comfortDIM overview



comfortDIM

x-touchPANEL / x-touchBOX Compact DALI lighting management system 64 or 128 addresses 5.7” colour touch screen with simple intuitive

operation Simple start-up and adaptation of DALI installations Sequencer and scheduler (weekday and intraday) TCP/IP interfaces or operation via web browser

comfortDIM overview



comfortDIM

x-touch PLATFORM – Colours at the slightest touch Special colour mode optimised for RGB applications Simple colour selection RGB and white light control

comfortDIM overview



comfortDIM

DALI MSensor Combined light sensor and motion sensor Different surface-mounted ad installation versions

available Focus on energy savings Wide range of applications, from simple to complex,

configurable with software tool Multiple sensors in the same group possible Available as master or slave versions

DALI RC Remote control for controlling the groups, retrieving

scenes and setting light values Operation of the overall system

comfortDIM overview Animation



comfortDIM

Manual group / scene control Manual control via standard switches Option for dimming, on / off switching and scene recall The desired group / scene is simply set on the controller Scalable installation; several control modules can be connected Offers maximum planning freedom

comfortDIM overview



comfortDIM

Multi-functional control The desired function can be freely configured on the relevant devices Configuration via freely available software tool Scalable installation; several control modules can be connected Offers maximum planning freedom Typical functions:

On / off switching Fading up / down Calling up DALI scenes Direct adjustment of the light value Other functions for DALI MC

comfortDIM overview



comfortDIM

Automatic scene control (sequence) Self-executing sequences by combining preset lighting scenes Adjustable intervals Up to 16 lighting scenes can be recalled one after the other in a DALI circuit

comfortDIM overview



comfortDIM

Automatic daylight and presence control Implementation of energy-efficient solutions through combination with sensor module Daylight-dependent and/or presence-dependent Extended functionality of the DALI MSensor through remote control Multiple sensors can be connected to a DALI line

comfortDIM overview



comfortDIM

Convenient operation and programming Multifunctional controller with touch screen Intuitive start-up and control Simple implementation of dynamic lighting scenes with x-touch Control of 16 luminaire groups or 16 scenes which can be placed in up to 99 lighting sequences Controlled daily schedules (Monday to Sunday) The user interface can be customised

comfortDIM overview



comfortDIM

Comfortable configuration with a PC Complex installations can be easily addressed and programmed on a PC

(connection via DALI USB) Simple optimisation of device functionality

comfortDIM overview



proDIM

DALI meets TCP/IP Ethernet Central control, monitoring and maintenance with

just one system Innovative lighting management that links DALI

systems with building management systems User-friendly operation on a PC with winDIM@net

Emergency lighting system overview



proDIM

winDIM@net – Monitoring for added value For extended lighting systems Software-based lighting management for networking

an almost unlimited number of DALI addresses Links the standard technologies TCP/IP and DALI Enables normal and emergency lighting systems to

be combined Flexibility through functionality Central control, monitoring and evaluation Simplification of facility management

Animation Emergency lighting system overview



proDIM

System components Modular gateway controls up to 10 DALI lines via

TCP/IP Perfect integration of the components in the overall

system Complete integration of safety lighting in the system




e-touch

Emergency light you can rely on Compact DALI-based emergency lighting system:

e-touchBOX: up to 60 emergency lighting units e-touchPANEL: up to 120 emergency lighting units

Simple start-up (patented identification system for installed emergency lighting units) Intuitive operation Standard system tests and logging Can be networked via Ethernet (e-touchPANEL)



e-touch

e-touchBOX Emergency lighting with compact management Professional solution, simple handling and installation Simple configuration with EM PRO EZ® Maximum of 60 emergency lighting units Status report can be retrieved via infra-red Automated staggered start for the emergency lighting test




e-touch

e-touchPANEL Same functionality as e-touchBOX Maximum of 120 emergency lighting units The corona provides a highly visible status display The Ethernet connection provides a link to a PC and

therefore a central status display Simple operation and report evaluation on a PC




e-touch

EM-LINK PC software for networking e-touchPANEL units Ideal for retro-fitting Monitoring and operation on a PC Requested test reports can be collected, stored and

printed out on the PC

DA

LI

DA

LI

DA

LI

EM LINK

Animation Emergency lighting system overview



Notlichtsystemübersicht

proDIM:

winDIM@netor EMwinPRO

≤ 64,000 emergency lighting units BC

9000KL

6811KL

6811

≤ 640 DALI emergency lighting units

...BC

9000KL

6811KL

6811winDIM@net

CAT5 (ethernet cable)

≤ 640 DALI emergency lighting units

e-touchPANELwith EM-LINK function

≤ 600 emergency lighting units Monitoring with Internet Explorer or Tridonic EM-LINK software

DALIPS

DALIPS

PanelPS

DALIPS

DALIPS

PanelPS

...

CAT5 (ethernet cable)

e-touchPANEL

≤ 120 emergency lighting units

EM PRO EM powerLED PRO

PC COMBOconnect

PRO module

EM PRO EM powerLED PROPC COMBO

connect

PRO module

DALIPS

DALIPS

PanelPS

e-touchBOX“one box system” ≤ 60 emergency lighting units

EM PRO EM powerLED PRO PC COMBOconnect

PRO module




corridorFUNCTION

Small outlay, big effect Note: control functionality is already integrated

in the ballast The principle: light whenever it is needed Considerable reduction in energy consumption Maximum potential savings by combining with a

daylight sensor and motion sensor



plugADDRESSING

Versatility without compromise – simple, efficient and cost-effective Additional functionality already integrated in

ballasts Cost-effective dimming and switching User-friendly operation from multiple control

points Powerless switching via the control interface Simple polarity-free wiring Unaffected by control line breaks



DSI (Digital Serial Interface)

Simply functional To optimise the energy consumption of extensive groups of luminaires

(e.g. in sports stadiums and factories) Simple programming of scenes Common routing of the control line and mains power supply cabling in one duct Digital transmission means no problems of interference and an identical dimming value for all the

luminaires



DALI (Digital Addressable Lighting Interface)

Established standard Up to 64 digital dimmable ballasts on one line 16 groups and 16 lighting scenes can be programmed Regrouping (due to building work) is possible at any time without the need for costly rewiring All Tridonic one4all devices comply with the DALI standard



Ecolution

Ecological awareness is sweeping through the world of lighting Energy savings of up to 80 % thanks to presence /

daylight sensor (disconnection if no one present) Optimum use of available daylight through individual

control of the lighting strips (RCC controller)

start technologyecolutionproduct overview luxcontrol lighting management systems technology provide...

Documents

control systems

light sensor motion

control module slide

innovative lighting

ambient light sensor

tailormade systems

daylight sensor

luminaire control module