state of ohio · me812u me812u $3,150.53 theme812uisageneral‐purpose controllerthatyou can use...

StateofOhio

StateTermSchedule

Effective Date: December 2017

Automated Logic Price List ......................................................................................................................................................... 2

Field Labor Pricing ................................................................................................................................................................ 20

Field Device Price List ........................................................................................................................................................... 21

STS TABLE OF CONTENTS

ALC TABLE OF CONTENTS

Contract # 800560/STS632 3 Automated Logic Corp, December 2017

ALC Table of Contents ................................................................................................................................................................. 3

Warranty ................................................................................................................................................................................. 4

Training ........................................................................................................................................................................................ 4

Software Products ....................................................................................................................................................................... 5

WebCTRL Pricing ..................................................................................................................................................................... 5

Optional WebCTRL Packages .................................................................................................................................................. 6

WebCTRL Tools ........................................................................................................................................................................ 7

Hardware Products ...................................................................................................................................................................... 8

Communication Router Products ............................................................................................................................................ 8

Communication Router/Gateway Products ............................................................................................................................ 8

Multi‐Purpose Controllers: Router/Gateway/Processor ........................................................................................................ 9

Multi‐Equipment Controllers and expanders ....................................................................................................................... 10

Multi‐Equipment Controllers and expanders (Continued) ................................................................................................... 11

Single Equipment Controllers ............................................................................................................................................... 11

Room Controllers .................................................................................................................................................................. 12

Zone Controllers .................................................................................................................................................................... 13

Cable Assemblies ................................................................................................................................................................... 14

Zone Sensors ......................................................................................................................................................................... 15

Ancillary ARCNET156 and EIA‐485 Boards ............................................................................................................................ 16

UUKL APPROVED CONTROLLERS AND FEES .......................................................................................................................... 17

WARRANTY


The warranty period for all ALC manufactured products are shown throughout this document by product category.

THIS WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, ORAL OR WRITTEN, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. ALC SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE OR KIND WHATSOEVER AND IN NO EVENT SHALL ALC'S LIABILITY FOR BREACH OF CONTRACT HEREUNDER, FOR NEGLIGENCE, OR OTHERWISE EXCEED THE AMOUNT OF THE PURCHASE PRICE OF THE ALC PRODUCTS PURCHASED HEREUNDER WITH RESPECT TO WHICH DAMAGES ARE CLAIMED.

Automated Logic offers the following for owner/operator training:

1. WebCTRL Media‐based Tutorials (available through your local ALC Field Office) a. Using WebCTRL for Owners/Operators b. WebCTRL Tools (Eikon for WebCTRL, SiteBuilder, ViewBuilder, EquipmentBuilder)

2. Classroom Training a. In‐house (The student travels to Atlanta or other factory‐certified training center) b. Onsite (A factory‐certified instructor travels to the student's location)

3. Online Training ‐ One‐on‐one, online training sessions with a factory‐certified instructor Please contact your local ALC Field Office for classroom and online training registration. For onsite training, please contact your local ALC Field Office for a quote. (Note: each onsite training course is considered to be a custom course and prices will vary depending on instructor availability, location, etc.)

Consult with your local ALC authorized Field Office for server and client specifications.

TRAINING


WEBCTRL FEATURES: A WebCTRL® system supports:

Unlimited simultaneous users Multiple operating systems and databases Built‐in alarming, trending, and reporting International languages (International English, Canadian French, French, German, Italian, Japanese, Korean, Russian,

Traditional and Simplified Chinese, Spanish, Swedish, Thai, Vietnamese) Third‐party integration WAP‐enabled devices Secure server access using TLS Optional WebCTRL® packages listed below

WEBCTRL PRICING

Product Part# GSA Price Notes WebCTRL® WC $7,511.34 Automated Logic’sWebCTRL is a building automation

system that offers an intuitive user interface and powerful control features.

WebCTRL 500 WC500 $1,362.62 All the features of WebCTRL, but limited to 500 pointsof integration.

OPTIONAL WEBCTRL PACKAGES

Product Part# GSA Price Notes Advanced Alarming WC‐ADV_ALARM $973.30 Recommended where 21 CFR11 is required.

The following alarm actions: ‐ Send SNMP trap ‐ Write property ‐ Write to database

Advanced Reporting WC‐ADV_REP $973.30 Recommendedwhere 21 CFR11 is required.Configurable report designer for making environmental reports. Available report types: ‐ Equipment Values ‐ Trend Samples

Advanced Security WC‐ADV_SEC $1,459.95 Required to comply with 21 CFR11 ‐ Location‐dependent operator access ‐ Configurable password policies ‐ Requirement of operator comments and operator verification prior to accepting system changes

Automated Demand Response Add‐On

ADD‐OADR2 $8,463.48 WebCTRL® Add‐on ‐ Open Standard Demand Response (DR) interface that allows electricity providers to communicate DR signals directly to WebCTRL.

WebCTRL® system media WC‐MEDIA $25.00 The WebCTRL application is now a download part.When you place an order for the WebCTRL system, you receive a license in the ALC License Manager. No media will be shipped. If a DVD is required by your customer, you can purchase the optional WebCTRL® system media.

SOFTWARE PRODUCTS


OPTIONAL WEBCTRL PACKAGES (CONTINUED)

Product Part# Price Notes Energy Reports – Basic: Saas‐Annual Subscription

ER‐B $3,000.00 Automated Logic’s EnergyReports™ application is anincredibly flexible, easy‐to‐use reporting tool that gives facility managers the power to produce a wide variety of reports showing a building’s energy consumption.

ENERGYREPORTS STANDARD: SaaS‐Annual subscription.

ER‐S $5,500.00

ENERGYREPORTS PROFESSIONAL: SaaS‐Annual subscription.

ER‐P $8,000.00

ER ADDITIONAL BUILDINGS ‐ BASIC: Per building, per year. ER ADDITIONAL

ER‐BLDB $225.00

ER ADDITIONAL BUILDINGS ‐ STANDARD: Per building, per year.

ER‐BLDS $450.00

ER ADDITIONAL BUILDINGS‐ PROFESSIONAL: Per building, per year.

ER‐BLDP $675.00

ER ADDITIONAL DATA POINTS: Per datapoint, per year.

ER‐DP $60.00

ER AUTOMATED UTILITY ACCOUNTS: Per account, first year. $48 per account every year

ER‐UA $78.00

ER AUTOMATED UTILITY PROVIDERS: Onetime fee. No annual subscription. Standard

ER‐UP $600.00


All versions of WebCTRL include the following tools.

Use...

To...

EIKON® for WebCTRL®

Create control programs and Properties pages.

EIKON® for WebCTRL® is the most advanced graphical programming tool in the industry. With the click of a button, you can build complex control algorithms, diagnose problems, and run real‐time or simulated operational data to evaluate the performance of a control sequence. EIKON makes it easy to understand control sequences as it does not use cryptic “line by line” computer code.

ViewBuilder

Create graphics for WebCTRL and touchscreens.

ViewBuilder is user interface design and programming tool used as an adjunct to create graphics and drawings that a Building Automation System does not already have in its Library, or to change existing graphic views. Comes with a graphic library for use with Automated Logic controllers or you can use ViewBuilder to create new graphics.

SiteBuilder

Create and modify the system database and associate control programs and graphics with equipment.

Third‐Party BACnet Utility

Use discovered BACnet information to choose and address microblocks for third party BACnet integration.

EquipmentBuilder

Generate the following files from a library of pre‐defined applications.

Control program (.equipment)

Graphic (.view)

BACview® file (.bacview), if applicable to the equipment

Sequence of operation (.odt)

Visio schematic (.vdx)

WebCTRL software tools require Windows 7 or Windows 8.

WEBCTRL TOOLS


COMMUNICATION ROUTER PRODUCTS

Product Part# GSA Price Notes ARCnet to ARCnet Router AAR $260.25 Part of Automated Logic’s WebCTRL® system, the AAR is

designed to expand or segment high speed ARCNET 156Kbps networks.

Conveniently housed in a rugged and compact enclosure for panel mounting, the AAR is designed with two ARC156 communication ports.

ARCnet to MS/TP Router AMR $518.93 Part of Automated Logic’s WebCTRL® system, thecompact, rugged, and cost‐effective AMR allows routing between a fast ARC156 network and a slower BACnet MS/TP network, allowing integration to third‐party BACnet MS/TP equipment.

24-month warranty

COMMUNICATION ROUTER/GATEWAY PRODUCTS

Product Part# GSA Price Notes Equipment Portal EQ‐PRTL $378.74 Automated Logic’s Equipment Portal (EQ‐PRTL) sets a

new standard for integrating other manufacturers’ equipment into WebCTRL®. EQ‐PRTL acts as a gateway to a single piece of equipment /device using proprietary or open protocols such as Modbus and LonWorks.

The Equipment Portal supports BACnet® over ARCNET 156 kbps and MS/TP communications standards.

Up to 100 third‐party points may be integrated using Equipment Portal.

LON Option Card LON‐OC $215.82 The LonWorks Option Card is a device that enablescommunication between the Equipment Portal and devices on a LonWorks network. The LonWorks Option Card connects to the Equipment Portal using a 10‐inch ribbon cable (included). The LON Option Card supports up to 100 LON points.

LGR25 LGR25 $1,423.98 The LGR25 is a BACnet router and a protocol translator for integrating third-party points into your WebCTRL® system. The LGR25 is designed to support up to 25 Third Party points; that can connect hundreds of control modules to a BACnet®/IP backbone.

Supports BACnet/IP, BACnet‐over‐Ethernet, ARCNET 156 kbps, MS/TP, and BACnet PTP communication standard.

24-month warranty

Continued on next page

HARDWARE PRODUCTS

COMMUNICATION ROUTER/GATEWAY PRODUCTS (CONTINUED)


Product Part# GSA Price Notes LGR250 LGR250 $1,908.51 The LGR250 is a BACnet router and a protocol translator

for integrating third‐party points into your WebCTRL® system. The LGR250 is designed to support up to 250 Third Party points; that can connect hundreds of control modules to a BACnet®/IP backbone.


LGR1000 LGR1000 $3,518.69 The LGR1000 is a BACnet router and a protocoltranslator for integrating third‐party points into your WebCTRL® system. The LGR1000 is designed to support up to 1,000 Third Party points; that can connect hundreds of control modules to a BACnet®/IP backbone.


MULTI‐PURPOSE CONTROLLERS: ROUTER/GATEWAY/PROCESSOR

Product Part# GSA Price Notes ME‐LGR25 ME‐LGR25 $1,813.30 TheME‐LGR25 is a general‐purpose controller that you

can use for a variety of applications. The ME‐LGR25 can act as a controller and a BACnet router. It can also act as a protocol translator, allowing you to integrate third‐ party devices into your WebCTRL® system.

Supports up to 25 Third Party Points, 100 Mbps communications, and up to 6 MEx, MX, or X expanders.

ME‐LGR200 ME‐LGR200 $3,905.89 TheME‐LGR200 is a general‐purpose controller that youcan use for a variety of applications. The ME‐LGR200 can act as a controller and a BACnet router. It can also act as a protocol translator, allowing you to integrate third‐party devices into your WebCTRL® system.

Supports up to 200 Third Party Points, 100 Mbps communications, and up to 6 MEx, MX, or X expanders.

24-month warranty

MULTI‐PURPOSE CONTROLLERS: ROUTER/GATEWAY/PROCESSOR (CONTINUED)


Product Part# GSA Price Notes ME812u‐LGR Controller ME812U‐LGR $4,576.62 TheME812u‐LGR is a general‐purpose controller that

you can use for a variety of applications. The ME812u‐ LGR can act as a controller and a BACnet router. It can also act as a protocol translator, allowing you to integrate third‐party devices into your WebCTRL® system.

Supports: BACnet/IP, BACnet‐over‐Ethernet, ARCNET 156 kbps, and MS/TP Up to 5 MEx, MX, or X expanders.

24-month warranty

MULTI‐EQUIPMENT CONTROLLERS AND EXPANDERS

Product Part# GSA Price Notes ME812U ME812U $3,150.53 TheME812u is a general‐purpose controller that you

can use for a variety of applications. The ME812u is part of the line that lets you build a complete HVAC control system a piece at a time.

Supports: 8 Universal Outputs 12 Universal Inputs BACnet over ARCNET 156 kbps and MS/TP Up to 5 MEx, MX, or X expanders.

ME812U‐E ME812U‐E $3,345.19 TheME812u‐E is a general‐purpose controller that youcan use for a variety of applications. The ME812u is part of the line that lets you build a complete HVAC control system a piece at a time.

Supports: 8 Universal Outputs 12 Universal Inputs BACnet IP Up to 5 MEx, MX, or X expanders.

MEx816U MEX816U $1,813.30 MEx816u expander module with 8 Universal Outputs,16 Universal Inputs.

The MEx I/O expanders can be remote mounted or directly mounted on the Multi‐Equipment Controllers.

MEx48U MEX48U $810.38 MEx48u expander module with 4 Universal Outputs, 8Universal Inputs.


Continued on next page

MULTI‐EQUIPMENT CONTROLLERS AND EXPANDERS (CONTINUED)


Product

Part#

GSA Price

Notes

MEx88U MEX88U $1,161.61 MEx88u expander module with 8 Universal Outputs, 8 Universal Inputs.


MEx016U MEX016U $960.60 MEx016u expander module with 16 Universal Inputs. The MEx I/O expanders can be remote mounted or directly mounted on the Multi‐Equipment Controllers.

24-month warranty

SINGLE EQUIPMENT CONTROLLERS

Product Part# GSA Price Notes SE6166 SE6166 $1,273.75 The SE6166 controller controls rooftop air handling

units (AHUs), other large single pieces of equipment, or zones. You can mount the SE6166 on or inside the rooftop equipment.

SE controllers use native BACnet communications over either a high speed ARCNET 156 kbps network or a medium speed MS/TP network to provide maximum flexibility and interoperability. 6 Digital Outputs 16 Universal Inputs 6 Analog Outputs

SE6104a $907.71 The SE6104a controller controls rooftop air handlingunits (AHUs), other large single pieces of equipment, or zones. You can mount the SE6104a on or inside the rooftop equipment.

SE controllers use native BACnet communications over either a high speed ARCNET 156 kbps network or a medium speed MS/TP network to provide maximum flexibility and interoperability. 6 Digital Outputs 10 Universal Inputs 4 Analog Outputs

24-month warranty

LOCAL OPERATOR INTERFACES


Product Part# GSA Price Notes Equipment Touch EQT1‐4‐ALC $952.14 The Equipment Touch is a touchscreen device with a 4.3

in. color LCD display that you connect to a controller to view or change its property values, schedule e q u i p m e n t , view trends and alarms, and more, without having to access the system's server. Temperature Sensing Humidity Sensing Unitary ‐ Single Controller Interface Communicates via R‐Net

System Touch SYST1‐4‐ALC $1,057.93 The System Touch is a touchscreen device with a 4.3 in.color LCD display that you connect to a controller to view or change its property values, schedule equipment, view trends and alarms, and more, without having to access the system's server. Temperature Sensing Humidity Sensing Multiple Controller Interface Communicates via MS/TP

24-month warranty

ROOM CONTROLLERS

Product Part# GSA Price Notes Room Controller RC642 $296.22 The RC642 Room Controller is a combination zone

sensor and controller that is used for zone control. Attractively packaged, the RC642 mounts directly on interior walls.

Room Controller + display RC642D $338.54 The RC642D Room Controller is a combination zone sensor and controller that is used for zone control.

Attractively packaged, the RC642D mounts directly on interior walls.

This model includes a LCD display.

ZONE CONTROLLERS


Product Part# GSA Price Notes ZN551 ZN551 $279.29 The ZN551 controller is used for zone control.

The ZN551 controllers connect to the Building Automation System (BAS) network using BACnet over ARCNET 156 kbps or MS/TP. The ZN551 supports a line of ZS room sensors using Rnet port. 5 Digital Outputs 5 Universal Inputs 1 Analog Output

ZN253 ZN253 $332.19 The ZN253 controller is used for zone control. The ZN253 controllers connect to the Building Automation System (BAS) network using BACnet over ARCNET 156 kbps or MS/TP. The ZN8 pt supports a line of RS room sensors using its Rnet port. 2 Digital Outputs 5 Universal Inputs 3 Analog Outputs

ZN220 ZN220 $167.15 The ZN220 controller is used for simple zone controlapplications such as fan coil units or for miscellaneous control points such as room lighting or toilet exhaust fans.

The ZN220 controllers connect to the Building Automation System (BAS) network using BACnet over ARCNET 156 kbps or MS/TP. The ZN220 supports a line of RS room sensors using its Rnet port. 2 Digital Outputs 2 Universal Inputs 0 Analog Outputs

ZN341V+ ZN341V+ $408.36 The ZN341v+ controller is used for zone control. It has abuilt‐in flow sensor and actuator, uses a patented flow control algorithm, and mounts directly on the VAV box damper shaft.

The ZN series controllers are fully programmable and provide networked peer‐to‐peer communications using native BACnet‐over‐ARCNET 156 Kbps or MS/TP. 3 Digital Outputs 4 Universal Inputs 1 Analog Output

ZN141V+ ZN141V+ $344.89 The ZN141v+ controller is used for zone control. It has abuilt‐in flow sensor and actuator, uses a patented flow control algorithm, and mounts directly on the VAV box damper shaft.

The ZN series controllers are fully programmable and provide networked peer‐to‐peer communications using native BACnet‐over‐ARCNET 156 Kbps or MS/TP. 1 Digital Outputs 4 Universal Inputs 1 Analog Output

ZONE CONTROLLER ACCESSORIES


Product Part# GSA Price Notes ZASF ZASF $173.50 The ZASF is a device with an integral actuator to control

damper movement and an integrated flow sensor to measure airflow on the secondary VAV box in a dual duct system. The ZASF works with a ZN341v+ or ZN141v+controller.

FILT FILT $6.35 Replacement Air Filter for VAV controllers with integralvelocity sensor

USF USF $95.21 USF

24-month warranty

CABLE ASSEMBLIES

Product Part# GSA Price Notes USB‐L USB‐L $129.07 (1) ea. 12’ cables – USB to Rnet (incl. software driver)

24-month warranty

ZONE SENSORS


Part #

Description

Rnet

LCD Display

Occupa

ncy L

ED

Overrid

e

Temp

Humidity

CO2

IEQ

Fan Co

ntrol

Slide po

t

GSA price

ZS‐ALC $34.70 ZS‐C‐ALC $313.15 ZS‐H‐ALC $162.92 ZS‐HC‐ALC $378.74 ZS‐V‐ALC $302.57 ZS‐HV‐ALC $370.28 ZSPL‐ALC $43.59 ZSPL‐C‐ALC $321.61 ZSPL‐H‐ALC $171.39 ZSPL‐HC‐ALC $387.20 ZSPL‐V‐ALC $308.92 ZSPL‐HV‐ALC $378.74 ZSP‐ALC $63.48 ZSP‐C‐ALC $408.36 ZSP‐H‐ALC $247.56 ZSP‐HC‐ALC $490.88 ZSP‐V‐ALC $397.78 ZSP‐HV‐ALC $482.42 ZSPF‐ALC $71.94 ZSPF‐C‐ALC $418.94 ZSPF‐H‐ALC $251.79 ZSPF‐HC‐ALC $495.11 ZSPF‐V‐ALC $408.36 ZSPF‐HV‐ALC $486.65

24-month warranty

ANCILLARY ARCNET156 AND EIA‐485 BOARDS


Product Part# GSA Price Notes REP485 REP485 $114.26 The REP485 is a repeater that boosts communication

signals over lengthy runs of wire. It has two bidirectional, optically isolated ports that can communicate at speeds from 1200 bps to 156 kbps. You can use the REP485 on any ALC Previous Generation or BACnet communications using EIA‐485, like ARC156 and MS/TP networks.

DIAG485 DIAG485 $80.40 A DIAG485 is a diagnostic board that shows thecommunication signal levels on a network segment. Add at least one DIAG485 to each network segment. A DIAG485 located near the center of the network segment can also add bias to reduce the effects of noise on the network. You must put this DIAG485's Bias jumper in place. Only one DIAG485 per network segment can have its Bias jumper in place.

TERM485 TERM485 $16.93 Termination Resistor for ARCNET 156Kbps over EIA‐485,or regular EIA‐485

BT485 BT485 $344.89 Pack of 16, plug‐in devices for terminating and biasingARC156 network segments

PROT485 PROT485 $46.55 The PROT485 is a device that protects against largeelectrical surges on high‐speed (156 kbps) communication networks.

24-month warranty


UUKL APPROVED CONTROLLERS AND FEES

The following flat/net fee will be added to UUKL controllers. No additional fee will be added to the WebCTRL software. More on UUKL can be found here: http://accounts.automatedlogic.com/uukl

Product Part# FLAT FEE Notes AAR AAR $25 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. LGR1000 AMR $150 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. ME‐LGR200 ME‐LGR200 $150 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. ME812u‐LGR ME812u‐LGR $150 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. ME812u‐E ME812u‐E $150 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. ME812u ME812u $150 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. MEX816u MEX816u $150 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. SE6166 SE6166 $75 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. ZN341v+ ZN341v+ $75 The flat/net fee will be added to UUKL controller. No

additional fee will be added to the WebCTRL software. REP485 REP485 $0 Can be used in a UUKL system. A certification is not

required. DIAG485 DIAG485 $0 Can be used in a UUKL system. A certification is not

required.


FIELD LABOR PRICING

Position Labor Rate (Hourly) Technician Level 1 $105

Technician Level 2 $115



Administration $40

Electrical Installation $95

Mechanical Installation $95

Project Engineer $140

Software Engineer $145

Validation/Commissioning $175

Managers $165

Principal/Partner $240


Field Device Price List


57051‐R0 $118.40 BIDIRECTIONAL LOW DIFFERENTIAL PRESSURE TRANSMITTER | FIELD SELECTABLE OUTPUTS 4‐20 MA / 0‐5 VDC / 0‐10 VDC57060‐R0 $101.96 GAUGE PRESSURE TRANSMITTER | OUTPUT 4‐20 MA | 2 FT PIGTAIL | MANY PRESSURE RANGES TO CHOOSE FROM 0‐10/100/200/250/300/500 PSI OR 0‐1 KPSI

57068‐R0 $13.57MINI SOLID CORE CURRENT SWITCH | “GO/NO GO” APPLICATION | NORMALLY OPEN | TRIP POINT 0.2 AMP | OPERATING RANGE 0.2‐150 AMP | APERTURE SIZE 0.55 INCH | UL / CE APPROVED

57069‐R0 $25.90MINI SOLID CORE ADJUSTABLE CURRENT "STATUS" SWITCH | NORMALLY OPEN | ADJUSTABLE TRIP POINT 0.32 ‐ 150 AMPS | SUPPLY POWER INDUCTED FROM MONITORED CONDUCTOR | OPERATING RANGE 0‐150 AMPS | APERTURE SIZE 0.55 INCH | LED INDICATORS | UL / CE APPROVED

57070‐R0 $21.79MINI SPLIT CORE CURRENT SWITCH | “GO/NO GO” APPLICATION | NORMALLY OPEN | TRIP POINT 0.55 AMPS | SUPPLY POWER INDUCTED FROM MONITORED CONDUCTOR | OPERATING RANGE 0.55‐150 AMPS | APERTURE SIZE 0.53 INCH | UL / CE APPROVED

57071‐R0 $27.54MINI SPLIT CORE ADJUSTABLE CURRENT "STATUS" SWITCH | NORMALLY OPEN | TRIP POINT ADJUSTABLE 0.7‐ 150 AMPS | SUPPLY POWER INDUCTED FROM MONITORED CONDUCTOR | OPERATING RANGE 0‐150 AMP | APERTURE SIZE 0.53 INCH |LED INDICATORS | UL / CE APPROVED

57118‐R0 $21.38 DIFFERENTIAL PITOT TUBE | 3.126 INCH57119‐R0 $21.38 DIFFERENTIAL PITOT TUBE | 5.406 INCH57120‐R0 $23.02 DIFFERENTIAL PITOT TUBE | 7.656 INCH57121‐R0 $23.02 DIFFERENTIAL PITOT TUBE | 9.906 INCH

57128‐R0 $279.57COMBINATION TEMP/HUMIDITY COMBO | 1% RH [OVER 20% RANGE] | FIELD SELECTABLE RH OUTPUT 4‐20 MA / 0‐5 VDC OR 0‐10 VDC | INCLUDES3 POINT NIST CERTIFICATE | MUST SPECIFY THERMISTOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K

57138‐R0 $284.50OUTSIDE AIR HUMIDITY/TEMP COMBO | 1% RH [OVER 20% RANGE] | INCLUDES3 POINT NIST CERTIFICATE | FIELD SELECTABLE RH OUTPUT[4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [ANY THERMISTOR

57148‐R0 $279.57COMBINATION TEMP/HUMIDITY COMBO | 1% RH [OVER 20% RANGE] | INCLUDES3 POINT NIST CERTIFICATE | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [ANY THERMISTOR]

57149‐R0 $284.50COMBINATION TEMP/HUMIDITY COMBO | STAINLESS PLATE | 1% RH [OVER 20% RANGE] |INCLUDES3 POINT NIST CERTIFICATE | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [ANY THERMISTOR]

57129‐R0 $128.27COMBINATION TEMP/HUMIDITY SENSOR | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57130‐R0 $128.27 COMBINATION TEMP/HUMIDITY SENSOR | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 10K‐CP THERMISTOR5


57140‐R0 $128.27 COMBINATION TEMP/HUMIDITY SENSOR | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 10K‐CP THERMISTOR



57151‐R0 $131.56COMBINATION TEMP/HUMIDITY SENSOR WITH OVERRIDE | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]


57153‐R0 $138.14COMBINATION TEMP/HUMIDITY SENSOR WITH SETPOING AND OVERRIDE | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57156‐R0 $138.14 COMBINATION TEMP/HUMIDITY SENSOR | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 10K‐CP THERMISTOR| SETPOINT AND OVERRIDE

57154‐R0 $138.14COMBINATION TEMP/HUMIDITY SENSOR | STAINLESS | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57131‐R0 $129.92 COMBINATION TEMP/HUMIDITY SENSOR | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 1K RTD57141‐R0 $129.92 COMBINATION TEMP/HUMIDITY SENSOR | 2% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 1K RTD57052‐R0 $126.63 HUMIDITY SENSOR | 2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57055‐R0 $126.63 HUMIDITY SENSOR | 2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]56999‐R0 $126.63 ZONE SENSOR | WALL MOUNT | 2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | SPECIFY 20% SPAN57000‐R0 $167.74 ZONE SENSOR | WALL MOUNT | 2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | WITH LCD READOUT57001‐R0 $129.92 ZONE SENSOR | WALL MOUNT WITH OVERRIDE | 2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57002‐R0 $133.20 ZONE SENSOR | WALL MOUNT WITH SETPOINT AND OVERRIDE | 2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57003‐R0 $138.14 HUMIDITYSTAINLESS STEEL [WASH DOWN]2% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]



57133‐R0 $105.25 COMBINATION TEMP/HUMIDITY SENSOR | 3% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] |10K‐CP THERMISTOR57143‐R0 $105.25 OUTSIDE AIR HUMIDITY/TEMP COMBO3% RH| FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 10K‐CP THERMISTOR



57158‐R0 $106.89COMBINATION TEMP/HUMIDITY SENSOR | STAINLESS PLATE | 3% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57134‐R0 $106.89 COMBINATION TEMP/HUMIDITY SENSOR | 3% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] |1K OHM RTD57144‐R0 $106.89 OUTSIDE AIR HUMIDITY/TEMP COMBO3% RH| FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 1K RTD

57142‐R0 $105.25OUTSIDE AIR HUMIDITY/TEMP COMBO3% RH| FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57053‐R0 $103.60 HUMIDITY SENSOR | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57056‐R0 $103.60 HUMIDITY SENSOR | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57004‐R0 $103.60 ZONE HUMIDITY SENSOR | WALL MOUNT | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57005‐R0 $139.78 ZONE SENSOR | WALL MOUNT | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | WITH LCD READOUT57006‐R0 $106.89 ZONE HUMIDITY SENSOR WITH OVERRIDE | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57007‐R0 $106.89 ZONE HUMIDITY SENSOR | WALL MOUNT WITH SETPOINT | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57008‐R0 $110.18 ZONE HUMIDITY SENSOR | WALL MOUNT WITH SETPOINT AND OVERRIDE | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57009‐R0 $103.60 HUMIDITY SENSOR | WASH DOWN STAINLESS STEEL | 3% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]


57136‐R0 $90.45 COMBINATION TEMP/HUMIDITY SENSOR | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] |10K‐CP THERMISTOR





57161‐R0 $90.45COMBINATION TEMP/HUMIDITY SENSOR WITH OVERRIDE | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57162‐R0 $90.45COMBINATION TEMP/HUMIDITY SENSOR WITH SETPOINT | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57163‐R0 $93.74COMBINATION TEMP/HUMIDITY SENSOR WITH SETPOINT AND OVERRIDE | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57164‐R0 $90.45COMBINATION TEMP/HUMIDITY SENSOR | STAINLESS STEEL PLATE | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | MUST SPECIFY THERMISTOR FOR TEMPERATURE OUTPUT [3K / 5K / 10K‐AN / 10K‐CP / 10K‐CSI / 10K‐S / 20K / 100K]

57137‐R0 $95.38 COMBINATION TEMP/HUMIDITY SENSOR | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] |1K OHM RTD57147‐R0 $95.38 COMBINATION TEMP/HUMIDITY SENSOR | 5% RH | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC] | 1K OHM RTD57054‐R0 $85.51 HUMIDITY SENSOR | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57057‐R0 $85.51 HUMIDITY SENSOR | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57010‐R0 $85.51 ZONE HUMIDITY SENSOR | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57011‐R0 $88.80 HUMIDITY SENSOR WITH OVERRIDE | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57012‐R0 $88.80 HUMIDITY SENSOR WITH SETPOINT | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57013‐R0 $92.09 HUMIDITY SENSOR WITH SETPOINT AND OVERRIDE | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57014‐R0 $87.16 HUMIDITY SENSOR | WASH DOWN STAINLESS STEEL | 5% ACCURACY | FIELD SELECTABLE RH OUTPUT [4‐20 MA / 0‐5 OR 0‐10 VDC]57116‐R0 $23.02 ROOM PICKUP PORT | INFINITY ROOM STYLE

57072‐R0 $27.54SPLIT CORE CURRENT SWITCH | “GO/NO GO” APPLICATION | NORMALLY OPEN | TRIP POINT 2.5 AMPS | SUPPLY POWER INDUCTED FROM MONITORED CONDUCTOR | OPERATING RANGE 0‐250 AMPS | APERTURE SIZE 0.75 INCH | DIN RAIL SIZE 35 MM | LED INDICATORS


24263‐R0 $108.75 READS 6 ANALOG INPUTS AND OUTPUTS | AVERAGE / LOWEST / HIGHEST OR DIFFERENCE BETWEEN 2 INPUTS10000‐R0 $58.56 ADJUSTABLE ANALOG INPUT TO TWO RELAY OUTPUTS | INPUTS CAN BE 0‐12 VDC0‐24 VDCOR 0‐24 MA

10001‐R0 $85.33CONVERTS ANALOG INPUT TO FLOATING POINT OUTPUT W/ 2 RELAY CONTACTS [1 INCREASE/1 DECREASE] | 24 VAC/VDC | 8 ANALOG INPUTS [JUMPER SELECTABLE] | RATE OF CHANGE IS DIP SWITCH SELECTABLE | LED POWER INDICATOR | MANUAL OVERRIDE | MUST SPECIFY [1] TIMING

27536‐R0 $85.33CONVERTS ANALOG INPUT TO FLOATING POINT OUTPUT W/ 2 RELAY CONTACTS [1 INCREASE/1 DECREASE] | 24 VAC/VDC | 8 ANALOG INPUTS [JUMPER SELECTABLE] | RATE OF CHANGE [120/150/180 SECS] IS DIP SWITCH SELECTABLE | LED POWER INDICATOR | MANUAL OVERRIDE

27537‐R0 $85.33CONVERTS ANALOG INPUT TO FLOATING POINT OUTPUT W/ 2 RELAY CONTACTS [1 INCREASE/1 DECREASE] | 24 VAC/VDC | 8 ANALOG INPUTS [JUMPER SELECTABLE] | RATE OF CHANGE [14.0/16.5/19.0 SECS] IS DIP SWITCH SELECTABLE | LED POWER INDICATOR | MANUAL OVERRIDE

27538‐R0 $85.33ANALOG INPUT TO FLOATING POINT OUTPUT W/ 2 RELAY CONTACTS [1 INCREASE/1 DECREASE] | 24 VAC/VDC | 8 ANALOG INPUTS [JUMPER SELECTABLE] | RATE OF CHANGE [30/60/90 SECS] IS DIP SWITCH SELECTABLE | LED | MANUAL OVERRIDE | RELAYS STAY ON AT MIN & MAX VOLTAGES

10002‐R0 $108.75 ANALOG ISOLATION MODULE | 1:1 OUTPUT/INPUT10003‐R0 $120.46 SCALING ANALOG ISOLATION MODULE | 24 VAC POWER10004‐R0 $127.16 SCALING ANALOG ISOLATION MODULE | 120 VAC POWER10005‐R0 $51.87 ANALOG RE‐SCALING MODULE10006‐R0 $68.60 ANALOG INPUT TO DUAL | 4‐20 MA OUTPUT10007‐R0 $81.98 ANALOG SIGNAL AMPLIFIER10008‐R0 $85.33 FOUR ADJUSTABLE TRIP POINT RELAY OUTPUT10009‐R0 $80.31 ANALOG TO PWM OUTPUT10010‐R0 $81.98 FLOATING POINT TO ANALOG OUTPUT10011‐R0 $125.48 PWM TO 4 RELAY MULTIPLEXER | JUMPERS10013‐R0 $172.33 PWM TO 8 RELAY MULTIPLEXER | JUMPERS

10018‐R0 $150.58PULSE / ANALOG / FLOATING POINT INPUT SIGNAL CONVERTED TO PROPORTIONAL RESISTANCE OUTPUT | MUST SPECIFY [1] ENDING RESISTANCE WATTAGE [2] INPUT SIGNAL | NOTE ‐ BOARD IS JUMPER CONFIGURED IN THE FIELD

10027‐R0 $175.68 ANALOG/PWM/FLOATING POINT TO "CUSTOM" RESISTANCE10028‐R0 $138.87 ANALOG/PWM/FLOATING POINT TO 0‐135 OHM | MOTOR MOUNT10029‐R0 $113.77 FLOATING POINT TO PNEUMATIC W/ FEEDBACK | 41 SCIM BLEED10031‐R0 $123.81 FLOATING POINT TO PNEUMATIC W/ FEEDBACK | 750 SCIM S/E10033‐R0 $150.58 FLOATING POINT TO PNEUMATIC | FEEDBACK | FAILSAFE | 750 SCIM S/E10032‐R0 $132.17 FLOATING POINT TO PNEUMATIC| WITH FEEDBACK | 750 SCIM S/E | GAUGE10034‐R0 $158.94 FLOATING POINT TO PNEUMATIC | WITH FEEDBACK | FAILSAFE | 750 SCIM S/E | GAUGE10030‐R0 $122.14 FLOATING POINT TO PNEUMATIC | WITH FEEDBACK | 41 SCIM BLEED | GAUGE55775‐R0 $18.40 ENCLOSURE FOR ACT DEVICES10035‐R0 $92.02 ANALOG TO PNEUMATIC WITH FEEDBACK | 41 SCIM BLEED10037‐R0 $112.10 ANALOG TO PNEUMATIC WITH FEEDBACK | 750 SCIM S/E10040‐R0 $142.21 ANALOG TO PNEUMATIC WITH FEEDBACK AND FAILSAFE | 750 S/E10038‐R0 $122.14 ANALOG TO PNEUMATIC WITH FEEDBACK | 750 SCIM S/E | GAUGE10039‐R0 $127.16 ANALOG TO PNEUMATICWITH BRACKET FEEDBACK AND GAUGE10041‐R0 $150.58 ANALOG TO PNEUMATIC | FEEDBACK | FAILSAFE | 750 SCIM S/E | GAUGE10042‐R0 $155.60 ANALOG TO PNEUMATIC | BRACKET | FEEDBACK | FAILSAFE | GAUGE24264‐R0 $120.46 ANALOG TO PNEUMATIC | FEEDBACK | HIGH FLOW 1400 SCIM S/E | GAUGE10036‐R0 $100.39 ANALOG TO PNEUMATIC | FEEDBACK | 41 SCIM BLEED | GAUGE10043‐R0 $112.10 PWM TO PNEUMATIC FEEDBACK | 41 SCIM BLEED44683‐R0 $269.37 PWM TO PNEUMATIC | 0‐100 PS OUTPUT | DUAL VALVE DEVICE | 750 SCIM EXHAUST ON COMMAND10045‐R0 $122.14 PWM TO PNEUMATIC | FEEDBACK | 750 SCIM S/E10047‐R0 $148.91 PWM TO PNEUMATIC | FEEDBACK | FAILSAFE | 750 SCIM S/E10046‐R0 $132.17 PWM TO PNEUMATIC | FEEDBACK | 750 SCIM S/E | GAUGE10048‐R0 $157.27 PWM TO PNEUMATIC | FEEDBACK | FAILSAFE | 750 SCIM S/E | GAUGE10044‐R0 $120.46 PWM TO PNEUMATIC | FEEDBACK | 41 SCIM BLEED | GAUGE10053‐R0 $33.46 LOCAL POWER REGULATOR | 5‐24 VDC OUTPUT10054‐R0 $58.56 MANUAL ANALOG OVERRIDE SWITCH WITH ALARM20649‐R0 $36.81 TWO CHANNEL MANUAL DIGITAL OVERRIDE WITH FEEDBACK | FAIL SAFE MODEL


state of ohio · me812u me812u $3,150.53 theme812uisageneral‐purpose controllerthatyou can use...

Documents