staybridge suites – standardized room decor vista scheme ... · pdf filestaybridge...
TRANSCRIPT
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Lobby/Reception, Great Room, Breakfast Buffet, Pantry, Den, Business Center, Atlanta, GA 30346 Conference Room, Meeting Room, and First Floor Central Hallways
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/01/12 SP-B-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: General Contractor SPEC NO: SP-B-1 (V) DESCRIPTION: Stain for wood base at Lobby/Reception, Great Room, Breakfast Buffet, Pantry,
Den, Business Center, Conference Room, Meeting Room, and First Floor Corridors
FINISH/COLOR: Stain to match WilsonArt Laminate 7948K-07 MAMBO (Refer to SP-WD-1) Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Product to be of contract quality and suitable for commercial use. 2. Installer to verify quantity requirements prior to order. 3. This stain finish is to be used on existing wood base or new wood base. 4. Refer to drawings for existing base locations.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Entry Vestibule, Laundry Room Atlanta, GA 30346
MANUFACTURER: REP FIRM: StonePeak Ceramics, Inc. Attn: Nicole Bickerstaff 314 W. Superior St. Chicago, IL 60654 P: 312-335-0321 E: [email protected] www.stonepeakceramics.com SPEC NO: SP-B-2 (V) DESCRIPTION: Tile Base at Entry Vestibule and Laundry Room TYPE: Thru-Color Porcelain SERIES / COLOR: Cottage Collection / Beach House MODEL: Bullnose Base / USG324BT85 SIZE: 3” x 12”
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 4. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 3/32”. Grout color: Custom Building Products #145 Light Smoke. 5. Refer to plans for location.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-B-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Prep Kitchen Atlanta, GA 30346
MANUFACTURER: REP FIRM: Daltile Attn: John Hall 1630 Satellite Blvd. Duluth, GA 30097 P: 310-453-9112 C: 770-623-9477 SPEC NO: SP-B-3 (V) DESCRIPTION: Cove Base at Prep Kitchen TYPE: Field Ceramic SERIES / COLOR: Heathland / Raffia HL02 MODEL: P36C9TB SIZE: 6" x 12” Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.65 (unpolished). 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 1/8”. Grout color: CEG #183 Chateau (Custom Grout Solutions/Custom Building Products). 6. Refer to plans for location.
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-B-3 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Not for Color / Not to Scale / Design Intent Only
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Offices / Administration Areas Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-B-4 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-B-4 (V) DESCRIPTION: Carpet Base at Office / Administration Areas BASE: Room Service 32 oz. Cut Pile PRODUCT ID #: 57120981293123 DESIGN #: E837488DSE VERSION: A10088 STRIKE OFF: HP896782N10 DIMENSIONS: 4” base with bound edge CONSTRUCTION: Tufted, Patterned Cut Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: Invista® XTI Continuous Filament Nylon, Type 6,6 STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protection YARN FACE WEIGHT: 32 oz./sq.yd. (1085 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.75/in. (42.3/10 cm.) TUFTING DENSITY: 107.5 Tufts/sq.in. (1,611.5/100 sq.cm.) FINISHED PILE HEIGHT: 0.25 in. Sheared (6.4 mm.) DENSITY FACTOR 403,790 PRIMARY BACKING: Synthetic Woven SECONDARY BACKING: Synthetic ActionBac® NOMINAL TOTAL WEIGHT: 64 oz./sq.yd. (2170 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.31 in. (7.9 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Offices / Administration Areas Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Severe Use Traffic Recommendation. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. To be installed according to manufacturers directions. 6. Refer to plans for location.
Not for Color / See Actual Sample Not to Scale
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-B-4 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Stairwells Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-B-5 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-B-5 (V) DESCRIPTION: Carpet Base at Stairwells BASE: Room Service 32 oz. Cut Pile DIMENSIONS: 4” base with bound edge PRODUCT ID #: 57120981293123 DESIGN #: E837488DSE VERSION: A10088 STRIKE OFF: HP896782N10
CONSTRUCTION: Tufted, Patterned Cut Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: Invista® XTI Continuous Filament Type 6,6 Nylon STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protection BLEACH RESISTANCE: ColorSeal® TUFTED FACE WEIGHT: 32 oz./sq.yd. (1085.0 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.75/in. (42.3/10 cm.) TUFTING DENSITY: 107.5/sq.in. (1,666.6/100 sq.cm.) FINISHED PILE HEIGHT: 0.22 in. sheared (5.66 mm.) DENSITY FACTOR 403,790 AVERAGE DENSITY: 5,236 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Synthetic ActionBac® NOMINAL TOTAL WEIGHT: 64 oz./sq.yd. (1,625.6 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.30 in. sheered (7.6 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Stairwells Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Traffic Recommendation: Hotel Guestroom. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. To be installed according to manufacturers directions. 6. Refer to finish plan for location.
Not to Scale / Not for Color
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-B-5 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Fitness Room, Back of House Atlanta, GA 30346 MANUFACTURER: REP FIRM: Johnsonite Attn: John Stoll 5043 Abbey Lane Lilburn, GA 30047 P: 770-279-2756 / 770-365-000 F: 770-279-2756 E: [email protected] SPEC NO: SP-B-6 (V) DESCRIPTION: Vinyl Cove Base at Fitness Room and Back of House MODEL/STYLE NO: Traditional Wall Base FINISH/COLOR: 080 Fawn DIMENSIONS: 4” H Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for profile information. 2. Product to be of contract quality and suitable for commercial use. 3. Vinyl base to be installed at walls flush to floor. 4. To be installed by General Contractor. 5. Installer to verify quantity requirements prior to order. 6. Refer to drawings for locations.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-B-6 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Public and Employee Restrooms, Stairwell Vestibules Atlanta, GA 30346
MANUFACTURER: REP FIRM: StonePeak Ceramics, Inc. Attn: Nicole Bickerstaff 314 W. Superior St. Chicago, IL 60654 P: 312-335-0321 E: [email protected] www.stonepeakceramics.com SPEC NO: SP-B-7 (V) DESCRIPTION: Tile Base at Public and Employee Restrooms, Stairwell Vestibules TYPE: Thru-Color Porcelain SERIES / COLOR: Cottage Collection / Mountain Retreat MODEL: Cove Base at Public Restrooms: USG612C085 Bull Nose Base at Stairwell Vestibules: USG324BT85 SIZE: Cove Base: 6” x 12”; Bull Nose: 3” x 24” Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.80. 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 3/32”. Grout color: Custom Building Products #52 Tobacco Brown. 6. Refer to plans for location.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-B-7 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Corridors Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 4/23/12 1 SP-B-8 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-B-8 (V) DESCRIPTION: Carpet Base at Corridors BASE: Tetrapoint 36" COLORWAY: 1666 PRODUCT ID #: 57605981293124 DESIGN #: E837488DSE VERSION: A10088 STRIKE OFF: HP896783N10 DIMENSIONS: 4” base with bound edge CONSTRUCTION: Tufted, Textured Loop Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: 100% WearOn® Continuous Filament Nylon, Type 6.6 STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protction TUFTED FACE WEIGHT: 20 oz./sq.yd. (678.1 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.4/in. (40.9/10 cm.) TUFTING DENSITY: 104.0/sq.in. (1,611.5/100 sq.cm.) FINISHED PILE HEIGHT: 0.11 in. (2.8 mm.) DENSITY FACTOR 322,309 AVERAGE DENSITY: 6,545 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Attached Pad – ENHANCER™ Technology NOMINAL TOTAL WEIGHT: 102.4 oz./sq.yd. (3,472.1 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.34 in. (8.6 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Corridors Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Severe Use Traffic Recommendation. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. To be installed according to manufacturers directions. 6. Refer to plans for location.
Not for Color / See Actual Sample Not to Scale
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 4/23/12 1 SP-B-8 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Great Room, Den Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-CPT-1 (V) DESCRIPTION: Carpet Tiles at Great Room and Den BASE: Tetrapoint 36" COLORWAY: 1666 GREAT ROOM RUG: Product ID #: 54637543600076 Design #: V099N64LT Version: A09001 Strike Off: HP189682N09 GREAT ROOM FIELD: Product ID #: 54637543600075 Design #: T098H47LT Version: A09003 Strike Off: HP189681N09 DIMENSIONS: 36” x 36” CONSTRUCTION: Tufted, Textured Loop Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: 100% WearOn® Continuous Filament Nylon, Type 6.6 STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protction TUFTED FACE WEIGHT: 20 oz./sq.yd. (678.1 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.4/in. (40.9/10 cm.) TUFTING DENSITY: 104.0/sq.in. (1,611.5/100 sq.cm.) FINISHED PILE HEIGHT: 0.11 in. (2.8 mm.) DENSITY FACTOR 322,309 AVERAGE DENSITY: 6,545 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Attached Pad – ENHANCER™ Technology NOMINAL TOTAL WEIGHT: 102.4 oz./sq.yd. (3,472.1 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.34 in. (8.6 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Great Room, Den Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Severe Use Traffic Recommendation. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. To be installed according to manufacturers directions. 6. Refer to SP-B-1 (V) for wood base. 7. Refer to finish plan for location.
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Great Room Rug Great Room Field
Not for Color / See Actual Sample Not to Scale
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Corridors Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-CPT-2 (V) DESCRIPTION: Carpet with attached pad at Corridors BASE: Tetrapoint 36" COLORWAY: 1666 DIMENSIONS: 36” x 36” PATTERN:
Area Milliken Product ID Design Version Strike-Offs
C10 Runner 4-Tile Repeat
C10A TILE A 54637543600080 V096XS2L001 A10001 HP180298N09
C10B TILE B 54637543600081 V096XS2L002 A10001 HP180288N09
C10C TILE C 54637543600082 V096XS2L003 A10001 HP180289N09
C10D TILE D 54637543600083 V096XS2L004 A10001 HP180290N09
C11 Corridor Outfill/Guest Storage 54637543600084 T096XR5FL A10002 HP180291N09
C12 T-Rug
C12A Tile A 54637543600085 V097A73L001 A10002 HP182477N09
C12B Tile B 54637543600086 V097A73L002 A10002 HP182532N09
C12C Tile C 54637543600087 V097A73L003 A10002 HP182533N09
C12D Tile D 54637543600088 V097A73L004 A10002 HP182534N09
C13 Corridor Cove Base K108 (See Notes) 57605981293124 E837488DSE A10088 HP896783N10
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Corridors Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
CONSTRUCTION: Tufted, Textured Loop Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: 100% WearOn® Continuous Filament Nylon, Type 6.6 STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protction TUFTED FACE WEIGHT: 20 oz./sq.yd. (678.1 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.4/in. (40.9/10 cm.) TUFTING DENSITY: 104.0/sq.in. (1,611.5/100 sq.cm.) FINISHED PILE HEIGHT: 0.11 in. (2.8 mm.) DENSITY FACTOR 322,309 AVERAGE DENSITY: 6,545 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Attached Pad – ENHANCER™ Technology NOMINAL TOTAL WEIGHT: 102.4 oz./sq.yd. (3,472.1 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.34 in. (8.6 mm.) NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Severe Use Traffic Recommendation. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. To be installed according to manufacturers directions. 6. Refer to SP-B-8 (V) for carpet base. 7. Refer to finish plan for location.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Corridors Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Above Images are Not to Scale Not for Color; See Actual Sample
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Meeting Room Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-3 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-CPT-3 (V) DESCRIPTION: Carpet Tiles at Meeting Room BASE: Tetrapoint 36" COLORWAY: 1666 PATTERN: Product ID #: 54637543600078 Design #: V099LG8LT Version: A09001 Strike Off: HP189684N09 DIMENSIONS: 36” x 36” CONSTRUCTION: Tufted, Textured Loop Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: 100% WearOn® Continuous Filament Nylon, Type 6.6 STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protction TUFTED FACE WEIGHT: 20 oz./sq.yd. (678.1 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.4/in. (40.9/10 cm.) TUFTING DENSITY: 104.0/sq.in. (1,611.5/100 sq.cm.) FINISHED PILE HEIGHT: 0.11 in. (2.8 mm.) DENSITY FACTOR 322,309 AVERAGE DENSITY: 6,545 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Attached Pad – ENHANCER™ Technology NOMINAL TOTAL WEIGHT: 102.4 oz./sq.yd. (3,472.1 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.34 in. (8.6 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Meeting Room Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Manufacturer to submit sample to IHG for written approval prior to ordering. 4. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Severe Use Traffic Recommendation. 5. Installer responsible for on-site measurements and verifying yardage requirements. 6. To be installed according to manufacturers directions. 7. Refer to SP-B-1 (V) for wood base. 8. Refer to finish plan for location.
Not for Color; See Actual Sample Not to Scale
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-3 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Offices / Administration Areas Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-4 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-CPT-4 (V) DESCRIPTION: Carpet Tiles at Office / Administration Areas BASE: Tetrapoint 36" COLORWAY: 1666 PATTERN:
PRODUCT ID #: 54637543600079 DESIGN #: T098H47LT VERSION: A09003 STRIKE OFF: HP189681N09
DIMENSIONS: 36” x 36” CONSTRUCTION: Tufted, Textured Loop Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: 100% WearOn® Continuous Filament Nylon, Type 6.6 STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protection TUFTED FACE WEIGHT: 20 oz./sq.yd. (678.1 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.4/in. (40.9/10 cm.) TUFTING DENSITY: 104.0/sq.in. (1,611.5/100 sq.cm.) FINISHED PILE HEIGHT: 0.11 in. (2.8 mm.) DENSITY FACTOR 322,309 AVERAGE DENSITY: 6,545 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Attached Pad – ENHANCER™ Technology NOMINAL TOTAL WEIGHT: 102.4 oz./sq.yd. (3,472.1 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.34 in. (8.6 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Offices / Administration Areas Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Manufacturer to submit sample to IHG for written approval prior to ordering. 4. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Severe Use Traffic Recommendation. 5. Installer responsible for on-site measurements and verifying yardage requirements. 6. To be installed according to manufacturers directions. 7. Refer to SP-B-4 (V) for carpet base. 8. Refer to finish plan for location.
Not for Color / See Actual Sample Not to Scale
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-4 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Stairwells Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-5 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Milliken Carpet Attn: Brian Maloney LaGrange, GA P: 516-812-0014 F: 866-503-6812 E: [email protected] www.millikencarpet.com SPEC NO: SP-CPT-5 (V) DESCRIPTION: Carpet at Stairwells BASE: Room Service 32 COLORWAY: 1666 DIMENSIONS: 13’-6” width PATTERN:
PRODUCT ID #: 57120981293126 DESIGN #: E099LK5DS VERSION: A10001 STRIKE OFF: HP296487N10
CONSTRUCTION: Tufted, Patterned Cut Pile DYE METHOD: Digital Millitron® Dye Injection FACE FIBER: Invista® XTI Continuous Filament Type 6,6 Nylon STAIN & SOIL PROTECTANT: StainSmart® MOLD/MILDEW ODOR CONTROL: AlphaSan® Built-In Protection BLEACH RESISTANCE: ColorSeal® TUFTED FACE WEIGHT: 32 oz./sq.yd. (1085.0 g./sq.m.) TUFTING GAUGE: 1/10 (39.4/10 cm.) STITCHES: 10.75/in. (42.3/10 cm.) TUFTING DENSITY: 107.5/sq.in. (1,666.6/100 sq.cm.) FINISHED PILE HEIGHT: 0.22 in. sheared (5.66 mm.) DENSITY FACTOR 403,790 AVERAGE DENSITY: 5,236 PRIMARY BACKING: Synthetic Non-Woven SECONDARY BACKING: Synthetic ActionBac® NOMINAL TOTAL WEIGHT: 64 oz./sq.yd. (1,625.6 g./sq.m.) NOMINAL TOTAL THICKNESS: 0.30 in. sheered (7.6 mm.)
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Stairwells Atlanta, GA 30346
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for carpet. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, carpet meets or exceeds the following requirements: Class I ASTM E-648, NFPA-
258-T (or ASTM-E-662), AATCC-134, Traffic Recommendation: Hotel Guestroom. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. To be installed according to manufacturers directions. 6. Refer to SP-B-5 (V) for carpet base. 7. Refer to finish plan for location.
Not to Scale / Not for Color
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-CPT-5 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista, Spice, Chocolate, Sage Schemes – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Laundry Room, Sales Office, Operations Office, Office Work Room, Atlanta, GA 30346 Employee Break Room
MANUFACTURER: REP FIRM: General Contractor SPEC NO: SP-PL-1 DESCRIPTION: Plastic Laminate at Countertops PRODUCT: Wilsonart Laminate MODEL: 1763-60 Brune Slate FINISH: Plastic Laminate DIMENSIONS: Field Verify Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for laminate. 2. Product to be of contract quality and suitable for commercial use. 3. Installer to verify quantity ordered. Installer responsible for on-site measurements. Laminate must
be installed according to manufacturer’s directions for all warranties to apply. 4. Refer to plans for location.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-PL-1 All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Elevator Cab Atlanta, GA 30346
MANUFACTURER: REP FIRM: Wilsonart International 2400 Wilson Place Temple, TX 76503-6110 P: 800-433-3222 F: 254-207-2384 www.wilsonartlaminate.com SPEC NO: SP-PL-2 (V) DESCRIPTION: Wall Panels at Elevator Cab MODEL/STYLE NO: Compact Laminate Fire-Rated Grade COLOR: 7948 – Mambo DIMENSIONS: Panel size and thickness to be coordinated by elevator supplier Fabrication to be in accordance with IHG and Staybridge Suites standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for laminate. 2. Product to be of contract quality and suitable for commercial use. 3. Per manufacturer, fire rated compact laminate panels meets or exceeds the following: Class A/ 1 Fire
Rating, and is suitable for use in elevator cabs. 4. Substitutions of manufacturer are not permitted without prior written approval by IHG. 5. Installation and quantity of fire rated compact laminate panels to be coordinated by elevator supplier. 6. Refer to drawings for location.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 4/23/12 SP-PL-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites - Public Area Paint ScheduleVISTA
*If a paint manufacturer other than Sherwin Williams is preferred, the hotel MUST submit a sample draw card (paint color) to IHG for written approval prior to purchasing.
Item No. Item Description Name/Model Finish Supplier
Entry VestibulePT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Lobby/ReceptionPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-4 Paint at Accent Wall Quiver Tan / SW 6151 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Great RoomPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Breakfast BuffetPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-3 Paint at Accent Wall Empire Gold / SW 0012 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Prep KitchenPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
DenPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
PantryPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Business CenterPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-4 Paint at Accent Wall Quiver Tan / SW 6151 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
CorridorsPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Main Wall or
Above Chair Rail (Optional)Relaxed Khaki / SW 6149
EggshellSherwin Williams
PT-4 Paint Below Chair Rail (Optional) Quiver Tan / SW 6151 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Fitness RoomPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-5 Paint at Walls Svelte Sage / SW 6164 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Laundry RoomPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-3 Paint at Accent Wall Empire Gold / SW 0012 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Meeting Room or Conference RoomPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-4 Paint at Accent Wall Quiver Tan / SW 6151 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Offices/AdminPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin Williams
Staybridge Suites - Public Area Paint ScheduleVISTAPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Public Restrooms / Employee RestroomsPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin WilliamsWC-1 Vinyl Wallcovering
Back of HousePT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-2 Paint at Walls Relaxed Khaki / SW 6149 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
StairwellsPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-5 Paint at Walls Svelte Sage / SW 6164 Eggshell Sherwin WilliamsPT-8 Paint at Door Trim Black Bean / SW 6006 Semi-gloss Sherwin Williams
Indoor Pool AreaPT-1 Paint at Ceiling Pure White / SW 7005 Flat Sherwin WilliamsPT-6 Paint at Walls Sleepy Blue / SW 6225 Semi-gloss Sherwin Williams
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Fitness Room Atlanta, GA 30346
MANUFACTURER: REP FIRM: Bolon AB Matsinc. Box 73 Jim Cave SE-523 22 800-628-7462 x 210 Ultricehamn, Sweden www.bolon.com SPEC NO: SP-RF-1 (V) DESCRIPTION: Woven Vinyl Floor at Fitness Room STYLE NO: Now (Roll Goods) COLOR: Champagne CONTENT: Vinyl, Polyester, and Glass Fiber DIMENSIONS: 2.5mm thick x 6’-7” wide x roll length 82’-0”. Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for flooring. 2. Flooring to be of contract quality and suitable for commercial use. 3. Per manufacturer, flooring meets or exceeds the following requirements: COF wet >0.69, ASTM E
648 Class I (NFPA 701), ASTM E 662 450 or less. 4. Manufacturer to submit flooring sample to IHG for written approval prior to ordering. 5. No Manufacturer substitutions allowed. 6. Flooring to be installed with Bolon Quiet Cushion Underlayment for additional cushion and noise
suppression. 7. Refer to SP-B-6 (V) for vinyl base at Fitness Center. 8. Refer to drawings for location.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 4/23/12 1 SP-RF-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Breakfast Buffet, Gathering Table, Tray Table, Business Center, Meeting Room, Atlanta, GA 30346 and Public Restrooms
MANUFACTURER: REP FIRM: Daltile Attn: John Hall 1630 Satellite Blvd. Duluth, GA 30097 P: 310-453-9112 C: 770-623-9477 SPEC NO: SP-ST-1 (V) DESCRIPTION: Granite at Breakfast Buffet, Gathering Table, Tray Table, Business Center, Meeting
Room, and Public Restrooms MODEL/STYLE NO: G287 COLOR : Santa Cecilia FINISH: Polished, Eased Edge DIMENSIONS: ¾” Thick with built-up edge detail (Finished edge 1-1/2”) Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for granite. 2. Product to be of contract quality and suitable for commercial use. 3. Field verify all dimensions. 4. Refer to drawings for details. 5. Manufacturer to submit sample to IHG for written approval prior to production. 6. Granite to be installed by General Contractor. 7. Refer to drawings for locations and direction of grain/pattern.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-ST-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Breakfast Buffet, Gathering Table, Tray Table, Business Center, Meeting Room, Atlanta, GA 30346 and Public Restroom
MANUFACTURER: REP FIRM: DuPont CH Briggs 2047 Kutztown Road Reading, PA 19605 P: (610) 929-6969 SPEC NO: SP-ST-1 (V) DESCRIPTION: Quartz Option at Breakfast Buffet, Gathering Table, Tray Table, Business Center,
Meeting Room, and Public Restrooms MODEL/STYLE NO: Zodiaq COLOR : Papyrus FINISH: Polished, Eased Edge DIMENSIONS: ¾” Thick with built-up edge detail (Finished edge 1-1/2”) Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for quartz. 2. Product to be of contract quality and suitable for commercial use. 3. Field verify all dimensions. 4. Refer to drawings for details. 5. Manufacturer to submit sample to IHG for written approval prior to ordering. 6. Granite to be installed by General Contractor. 7. Refer to drawings for locations and direction of grain/pattern.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-ST-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Lobby / Reception Atlanta, GA 30346
MANUFACTURER: REP FIRM: Daltile Attn: John Hall 1630 Satellite Blvd. Duluth, GA 30097 P: 310-453-9112 C: 770-623-9477 SPEC NO: SP-ST-2 (V) DESCRIPTION: Granite at Registration Desk MODEL/STYLE NO: G412 COLOR : Yellow River FINISH: Polished, Eased Edge DIMENSIONS: ¾” Thick with built-up edge detail (Finished edge 1-1/2”) Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for granite. 2. Product to be of contract quality and suitable for commercial use. 3. Field verify all dimensions. 4. Refer to drawings for details. 5. Manufacturer to submit sample to IHG for written approval prior to ordering. 6. Granite to be installed by General Contractor. 7. Refer to drawings for locations and direction of grain/pattern.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-ST-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista, Spice, Chocolate, Sage Schemes – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Great Room, Breakfast Buffet Atlanta, GA 30346
MANUFACTURER: REP FIRM: Daltile Attn: John Hall 1630 Satellite Blvd. Duluth, GA 30097 P: 310-453-9112 C: 770-623-9477 SPEC NO: SP-ST-3 DESCRIPTION: Stack Stone at Fireplace & Arched Accent Wall MODEL: Mesa Ledge Stack / MS79 COLOR : Tide Water DIMENSIONS: Random Sizes: 4" - 19" long by 1.5" - 6" high Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for stacked stone. 2. Product to be of contract quality and suitable for commercial use. 3. Refer to drawings for details; field verify all dimensions. 4. Stack stone to be installed by General Contractor. 5. Recommended installation method: dry stacked, random pattern. 6. Manufacturer to provide scaled shop drawings and stone sample to IHG for written approval prior to
production. 7. Refer to drawings for locations.
Not for Color / Not to Scale Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/21/12 SP-ST-3 All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Entry Vestibule, Lobby Field, First Floor Central Hallways, Elevator Cab, Pantry, Atlanta, GA 30346 Business Center, and Laundry Room
MANUFACTURER: REP FIRM: StonePeak Ceramics, Inc. Attn: Nicole Bickerstaff 314 W. Superior St. Chicago, IL 60654 P: 312-335-0321 E: [email protected] www.stonepeakceramics.com SPEC NO: SP-T-1 (V) DESCRIPTION: Floor Tile at Entry Vestibule, Lobby Field, First Floor Central Hallways, Elevator Cab,
Pantry, Business Center, and Laundry Room TYPE: Thru-Color Porcelain SERIES / COLOR: Cottage Collection / Beach House SIZE: 6” x 24" x 3/8” Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.80. 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 3/32”. Grout color: Custom Building Products #145 Light Smoke. 6. Refer to SP-B-1 (V) for wood base at Lobby / Reception, First Floor Central Hallways, Pantry, and
Business Center. Refer to SP-B-2 (V) for tile base at Entry Vestibule and Laundry Room. 7. Refer to drawings for location and tile pattern.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 4/23/12 1 SP-T-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Lobby / Reception Atlanta, GA 30346
MANUFACTURER: REP FIRM: StonePeak Ceramics, Inc. Attn: Nicole Bickerstaff 314 W. Superior St. Chicago, IL 60654 P: 312-335-0321 E: [email protected] www.stonepeakceramics.com SPEC NO: SP-T-2 (V) DESCRIPTION: Accent Tile at Lobby / Reception Accent Rug TYPE: Thru-Color Porcelain SERIES / COLOR: Cottage Collection / Country Farm SIZE: 4” x 24” x 3/8”
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.80. 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 3/32”. Grout color: Custom Building Products #145 Light Smoke. 6. Refer to drawings for location and tile pattern.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-T-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Lobby / Reception A
MANUFACTURER: REP FIRM: StonePeak Ceramics, Inc. Attn: Nicole Bickerstaff 314 W. Superior St. Chicago, IL 60654 P: 312-335-0321 E: [email protected] www.stonepeakceramics.com SPEC NO: SP-T-3 (V) DESCRIPTION: Floor Tile at Lobby / Reception Accent Rug Field TYPE: Thru-Color Porcelain SERIES / COLOR: Cottage Collection / Beach House SIZE: 12” x 24" x 3/8”
Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.80. 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 3/32”. Grout color: Custom Building Products #145 Light Smoke. 6. Refer to plans for location and pattern.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 4/23/12 1 SP-T-3 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Breakfast Buffet, Public and Employee Restrooms, Stairwell Vestibules Atlanta, GA 30346
MANUFACTURER: REP FIRM: StonePeak Ceramics, Inc. Attn: Nicole Bickerstaff 314 W. Superior St. Chicago, IL 60654 P: 312-335-0321 E: [email protected] www.stonepeakceramics.com SPEC NO: SP-T-5 (V) DESCRIPTION: Floor Tile at Breakfast Buffet, Public and Employee Restrooms, Stairwell Vestibules TYPE: Thru-Color Porcelain SERIES / COLOR: Cottage Collection / Mountain Retreat SIZE: 6” x 24" x 3/8” Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.80. 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 3/32”. Grout color: Custom Building Products #52 Tobacco Brown. 6. Refer to SP-B-1 (V) for wood base at Breakfast Buffet. Refer to SP-B-7 (V) for tile base at Public and
Employee Restrooms, and Stairwell Vestibules. 7. Refer to drawings for location and tile pattern.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 4/23/12 1 SP-T-5 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista, Spice, Chocolate, Sage Schemes – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Prep Kitchen Atlanta, GA 30346
MANUFACTURER: REP FIRM: Daltile Attn: John Hall 1630 Satellite Blvd. Duluth, GA 30097 P: 310-453-9112 C: 770-623-9477 SPEC NO: SP-T-6 DESCRIPTION: Floor Tile at Prep Kitchen TYPE: Field Ceramic SERIES / COLOR: Heathland / Raffia HL02 SIZE: 12" x 12" x 5/16" Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for floor tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.60;
COF dry > 0.65 (unpolished). 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Grout to be provided by General Contractor. No substitutions allowed. Recommended grout joint
width: 1/8”. Grout color: CEG #183 Chateau (Custom Grout Solutions/Custom Building Products). 6. Base: Refer to SP-B-7 for the cove base for the Refreshed Chocolate and Sage schemes. Refer to
SP-B-3 for cove base for the Spice and Vista schemes. 7. Refer to plans for location.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-T-6 All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Public Restrooms, Employee Restroom Atlanta, GA 30346
MANUFACTURER: REP FIRM: Daltile Attn: John Hall 1630 Satellite Blvd. Duluth, GA 30097 P: 310-453-9112 C: 770-623-9477 SPEC NO: SP-T-7 (V) DESCRIPTION: Wall tile at Public Restrooms and Employee Restroom TYPE: Colorbody Porcelain SERIES / COLOR: Modern Dimensions / K175-Biscuit FINISH: Semi-Gloss SIZE: 4-1/4” x 8-1/2” Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for wall tile. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, tile meets or exceeds the following requirements: ASTM C1028: COF wet > 0.50;
COF dry > 0.80 (unpolished). This product is not suitable for use as flooring in commercial applications.
4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must be installed according to manufacturer’s directions for all warranties to apply.
5. Grout: to be provided by General Contractor. No substitutions allowed. Recommended grout joint width: 1/16” for wall applications. Grout color: Custom Building Products #333 Alabaster.
6. Refer to plans for location.
Not for Color / Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 10/01/11 SP-T-7 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Public Areas Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 8/01/11 SP-TR-1 All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: Schluter Systems 194 Pleasant Ridge Road Plattsburgh, NY 12901-5841 P: 800-472-4588 F: 800-477-9783 SPEC NO: SP-TR-1 DESCRIPTION: Transition Strips FINISH/COLOR: Satin Anodized Aluminum DIMENSIONS: Field verify length needed per area per property Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to Schluter Systems website for necessary transition strip needed: http://www.schluter.com. 2. General Contractor to confirm transition strip is applicable per property prior to ordering. 3. General Contractor to determine quantity prior to ordering. 4. To be installed by General Contractor. 5. Product to be of contract quality and suitable for commercial use. 6. Refer to drawings for transition locations.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Back of House Atlanta, GA 30346
MANUFACTURER: REP FIRM: Armstrong Attn: Robert Eudy 3068 Woodbridge Lane Canton, GA P: 770-314-4941 E: [email protected] SPEC NO: SP-VCT-1 (V) DESCRIPTION: Vinyl Composition Tile at Back of House COLLECTION: Standard Excelon Stonetex COLOR: 52147 Pumice Stone DIMENSIONS: 12” x 12” x 1/8” Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows:
NOTES:
1. Refer to image below for VCT. 2. Tile to be of contract quality and suitable for commercial use. 3. Per manufacturer, VCT meets or exceeds the following requirements: ASTM E 648 Critical Radiant
Flux Class I - 0.45 or more watts/cm2, ASTM E 662 Smoke Developed 450 or less. 4. Installer to verify quantity ordered. Installer responsible for on-site measurements. Flooring must
be installed according to manufacturer’s directions for all warranties to apply. 5. Use with appropriate reducer strip for transitions to adjacent floor surfaces. 6. Refer to SP-B-6 (V) for vinyl base. 7. Refer to drawings for flooring locations and tile pattern.
Not for Color; See Actual Sample Not to Scale
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-VCT-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Public Restrooms, Employee Restroom Atlanta, Ga 30346
MANUFACTURER: REP FIRM: MDC Wallcoverings MDC Wallcovering 1200 Arthur Ave Attn: David Hale Elk Grove Village, IL 60007 C: 404.626.8180 P: 847-437-4000 / 800-621-4006 E: [email protected] E: [email protected] SPEC NO: SP-WC-1 (V) DESCRIPTION: Wallcovering at Public Restrooms and Employee Restroom COLLECTION: Bolta Brand, Bolta Contract Collection PATTERN: Clear Skies / BBCS16-4149 COLOR: Afternoon Swim CONTENT: Face: vinyl-coated fabric wallcovering; Backing: 100% Recycled polyester,
nonwoven. DIMENSIONS: 54” W; Repeat: N/A Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for wallcovering. Refer to finish plan for location. 2. Wallcovering to be of contract quality and suitable for commercial use. 3. Per manufacturer, wallcovering meets or exceeds the following requirements: 20 oz., Type II, 13.33 oz per
square yard, Class A ASTM E-84, Flame Spread: 20, Smoke Developed: 115; CCC-W-408, CFFA-W-101A, GSA approved - contract number GS-07F-0224J.
4. Per manufacturer, wallcovering is made up of 30% recycled content, including 20% post-consumer waste. 5. To be installed according to manufacturer’s directions for all warranties to apply. 6. Installation: random reversible match. Installer to verify yardage requirements prior to wallcovering order. 7. Refer to finish plan for location.
Not to Scale / Not for Color / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-WC-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Lobby / Reception Atlanta, GA 30346
MANUFACTURER: REP FIRM: Wendover Art Group Attn: Larry Hoffman 11885 44th Street North Clearwater, FL P: 404-749-5011 F: 727-573-1130 E: [email protected] SPEC NO: SP-WC-2 (V) DESCRIPTION: Wall Mural at Registration Desk MODEL/STYLE NO: Custom Accent Wall Vinyl / FS x127679787 DIMENSIONS: 120”W x 96”H / Field Verify Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for reference. 2. Wallcovering to be of contract quality, mildew resistant, and suitable for commercial use. 3. Per manufacturer, wallcovering meets or exceeds the following requirements: 20 oz., Type II, 13 oz
per square yard, Class A ASTM E-84, and CCC-W-408. 4. Installer responsible for on-site measurements and verifying yardage requirements. 5. Installer must use adhesive with mildew inhibitor. 6. To be installed according to manufacturer’s directions for all warranties to apply. 7. Refer to drawings for location.
Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-WC-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Breakfast Buffet Atlanta, GA 30346
MANUFACTURER: REP FIRM: Wendover Art Group / To Bid Attn: Larry Hoffman 11885 44th Street North Clearwater, FL P: 404-749-5011 F: 727-573-1130 E: [email protected] SPEC NO: SP-WC-3 (V) DESCRIPTION: Wall Mural at Breakfast Buffet MODEL/STYLE NO: Custom Accent Wall Vinyl / Silhouette of Treetops - Sepia CONTENT: Poly-Cotton Osnaburg or Polyester Nonwoven DIMENSIONS: 84” x 62” / Field Verify Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for reference. 2. Wallcovering to be of contract quality, mildew resistant, and suitable for commercial use. 3. Per manufacturer, wallcovering meets or exceeds the following requirements: 20 oz., Type II, 13 oz
per square yard, Class A ASTM E-84, and CCC-W-408. 4. To be installed according to manufacturer’s directions for all warranties to apply. 5. Installer responsible for on-site measurements and verifying yardage requirements. 6. Installer must use adhesive with mildew inhibitor. 7. Refer to drawings for location.
Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/02/12 SP-WC-3 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Public Areas Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/01/12 SP-WD-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: General Contractor SPEC NO: SP-WD-1 DESCRIPTION: Stain for Millwork at Public Areas and Ceiling Beams at Great Room FINISH/COLOR: Stain to match Wilsonart Laminate 7948K-07 MAMBO Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Product to be of contract quality and suitable for commercial use. 2. Installer to verify quantity requirements prior to order. 3. Submit finish sample to IHG for written approval. Finish sample must be stained on same
wood species as millwork per hotel property. 4. This stain finish is to be used on millwork construction at all public areas, including Great Room
Ceiling Beams. 5. Refer to drawings for locations.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Lobby/Reception, Great Room, Den Atlanta, GA 30346
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 3/01/12 SP-WD-2 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.
MANUFACTURER: REP FIRM: General Contractor SPEC NO: SP-WD-2 DESCRIPTION: Stain for wood built-in at Lobby/Reception, Great Room, Den FINISH/COLOR: Stain to match Pionite Hi-Brite WX421-H WITCHCRAFT Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Product to be of contract quality and suitable for commercial use. 2. Installer to verify quantity requirements prior to order. 3. Submit finish sample to IHG for written approval. Finish sample must be stained on same
wood species as millwork per hotel property. 4. This stain finish is to be used on built-in construction at Lobby/Reception desk, Lobby/Reception built-
in seating and planter, Great Room built-in banquette seating at window, and Den built-in seating at bay window.
5. Refer to drawings for locations.
Staybridge Suites – Standardized Room Decor InterContinental Hotels Group Vista Scheme – Public Area Design & Construction Three Ravinia Drive, Suite 100 AREA: Prep Kitchen Atlanta, GA 30346
MANUFACTURER: REP FIRM: Marlite 202 Harger Street Dover, OH 44622 P: 800-377-1221 SPEC NO: SP-WP-1 (V) DESCRIPTION: Wall Panels at Prep Kitchen MODEL/STYLE NO: Standard FRP – Smooth Surface / S100 S/2/S White DIMENSIONS: Field verify all dimensions Fabrication to be in accordance with IHG standards as stated in the FF&E Construction and Specification Guidelines and as follows: NOTES:
1. Refer to image below for wall panel. 2. Wall panels to be of contract quality, mildew resistant, and suitable for commercial use. 3. Per manufacturer, product meets Class III/C and Class I/A fire rating, USDA/FSIS requirements, and
is approved by the Canadian Food Inspection Agency and Agriculture Canada. 4. Product to be resistant to stains, chemicals, scratches and abrasions. 5. Panels to have high impact strength. 6. Installer responsible for on-site measurements and verifying yardage requirements prior to ordering. 7. Panels to be installed according to manufacturer’s directions for all warranties to apply. 8. Refer to drawings for location.
Not to Scale / Design Intent Only
QUANTITY: TBD UNIT COST: $ TBD TOTAL COST: $ TBD ISSUE DATE: REVISION DATE: REV. NO: SPEC NO: 8/01/11 SP-WP-1 (V) All orders must be marked as specified by IHG. All installed fabrics, upholstery, carpet, wallcovering, and other finish materials must meet local fire codes and regulations. Manufacturer must provide flame certificate to owner/purchaser at time order is shipped. Fabricator and/or installer must confirm the exact quantities required. All substitutions must be approved by IHG prior to ordering. Manufacturers must provide maintenance instructions. All shop drawings, finish samples, artwork and/or strike-offs must be submitted to IHG, for approval prior to production.