stb configuration for iptv
DESCRIPTION
TRANSCRIPT
1
Installation of Set Top Box (STB)Installation of Set Top Box (STB)Model:Model: S-Box7203S-Box7203
2
STB = Set Top BoxSTB = Set Top Box
What is STB?
3
Analog Signal
Why do we need STB?Why do we need STB?
STB encode/decode the digital signal and provide the TV set with known analogue signal.
Digital Signal
4
STB hardware Connection GuideSTB hardware Connection Guide
5. Connect the audio cable
5. Connect the audio cable
4. connect the network cable4. connect the network cable6. Connect the power
cord.6. Connect the power
cord.
1. Connect the power.1. Connect the power.
2. Connect the DSL line
2. Connect the DSL line
3. Turn on the Modem
3. Turn on the Modem
TVTV
STBSTB
HG 510HG 510
5
Configuring STB Through Configuring STB Through
SET Command SET Command
STB STB RemoteRemote
6
Displaying the Configuration Page Displaying the Configuration Page
• By pressing the SET button will get the above login page
• Enter the password (8288 by default)
• Get the configuration main menu.
7
Configuration main menu Configuration main menu
8
• Saving the Configuration Saving the Configuration
All changes need a password password 30083008 to be saved. If "successful!" is displayed, it indicates that the configurations have been successfully saved. If "password error!" is displayed, enter the correct
password and try to save again.
9
• 1 - Network Configuration 1 - Network Configuration
The STB has three network access modes: Static IP, DHCP, and PPPoE. We can select one of them so as to match the type of network access provided at your premises.
10
• Static IP Static IP
Enter the following Parameters:
• IP address
• Subnet mask
• DNS address
• Gateway address
• IGMP version of the switch (this item needs to be configured for multicast
services)
11
Static IP configuration page Static IP configuration page
(IGMP - (IGMP - Internet Group Management Protocol) Internet Group Management Protocol)
12
• PPPoE PPPoE
We need to configure the following parameters:
PPPoE user name : xxxxx@ptcl-iptv PPPoE password : xxxxx IGMP version : IGMP v2 (Internet Group Management Protocol)
PPPoE configuration page PPPoE configuration page
13
2 - Browser Configuration 2 - Browser Configuration
14
Browser Configuration Browser Configuration
• Home page:Home page:It is the first Web page displayed when the STB is turned on. Usually, it is the EPG page.
http://203.99.161.14:8082/EDS/jsp/index.jsp. http://203.99.161.14:8082/EDS/jsp/index.jsp.
• Entry:Entry: we can select BTV or EPG. If BTV is selected, the TV will display the last channel you watched last time. If EPG is selected, the TV will display the first page of EPG.
• Region:Region: • Select a region, the warning language of STB will be
changed to the language of the region you selected.
15
3 - TV Standard Configuration3 - TV Standard Configuration
16
TV Standard ConfigurationTV Standard Configuration
• In the TV standard configuration, we can select TV standard and set video display region and other parameters,
• TV standard: We can select PAL or NTSC according to the EPG standards the ISP provided and your local TV standard.
• Top margin: The margin between the video display area and the top margin of the TV.
• Left margin: The margin between the video display area and the left side margin of the TV.
• Width:The width of the video display area.
• Height: The height of the video display area.
17
4 - Time Configuration 4 - Time Configuration
In the time configuration, set the time information of STB • Cur time: The current time displayed• Time zone: 5 • Ntp time server: 203.99.161.89 • Note: Please, insert the correct time zone and NTP, server without
these settings TSTV will not work.
(NTP - Network Time Protocol)(NTP - Network Time Protocol)
18
5 - Software Information of STB5 - Software Information of STB
19
6 - Hardware Information of STB 6 - Hardware Information of STB
20
7 - Upgrade Software of STB 7 - Upgrade Software of STB
This page lists the configuration for the auto upgrade of the STB.This page lists the configuration for the auto upgrade of the STB.We need to enter the upgrade address, as shown above. We need to enter the upgrade address, as shown above.
21
8 - Identity Information of STB 8 - Identity Information of STB
This page lists the identity information of the STB, including the MAC address and the product serial number. These parameters are set by the factory and cannot be changed.
22
9 - Restore Parameter9 - Restore Parameter
23
CA card InstallationCA card Installation(CA- Conditional Access)(CA- Conditional Access)
• Smartcard Smartcard
The Smartcard with metal chipset down side has to insert into slot on front panel of STB. When the STB is switched on it authenticates the username and password associated with that particular CA card.
The user will not be able to view any services without entering of the IRDETO (encryption) CA card.
IRDETO provide CA Security Solution for Digital TV, IPTV and mobileI.R. DE TOONDER the developer of M-Net decoder