steel ball valves - chalermchai marketing.co.,ltd · 2011. 6. 14. · design and inspection...

1006① ITP

E-205=10

Steel Ball ValvesFloating Ball Design

ASME B16.34

KITZ Standard

BS 5351

ASME B16.34

ASME B16.10

ASME B16.5

API 598 or API 6D＊2

API 607 and API 6FA

BS 5351

BS 2080＊1

BS 1560

BS 6755 Part 1＊2

BS 6755 Part 2

Shell wall thickness

Face-to-face dimensions

End flange dimensions and flange gasket facing

Pressure test

Fire test

Pressure-temperature ratingsBody

Resilient sealing parts

KITZ Steel Ball ValvesFloating Ball Design

1

American Standards British StandardsItem

Design and Inspection Standards of KITZ Flanged Ball Valves

Example:

G- 300 SC TDZ 1H M -FS (Split body, side entry design)150 U TA (Uni-body, end entry design)

１２３４５６７８

This catalog uses MPa, a SI unit, for indication of pressures. psi and kgf/cm2 are also added for readers convenience.

None ········· Lever handle G ··············· Worm gear B ··············· KITZ Type B double action pneumatic actuator BS ············· KITZ Type BS Spring return pneumatic actuatorBSW ·········· KITZ Type BSW Spring return pneumatic actuator with manual operation deviceFA ············· KITZ Type FA double action pneumatic actuatorFAS ··········· KITZ Type FAS spring return pneumatic actuatorHAS ··········· KITZ Type HAS Spring return pneumatic actuatorE ················ Electric actuator

& Shell material & Trim material

Valve design & type TDZ ······· Type TDZTDZXL ··· Extended bonnet, Type TDZTB ········· Type TBTR ········· Type TRTBP ······· Pocketless, Type TBTB2L ····· 3-way 2-seat, L-port, Type TBTB2T ····· 3-way 2-seat, T-port, Type TBTB4LA ··· 3-way 4-seat, L-port, Type TBTB4TA ··· 3-way 4-seat, T-port, Type TBTBT ······· Direct mouting to tank bottomTBJ ······· Jacketed, Type TBTRJ ······· Jacketed, Type TRTBLN ····· PFA lined, Type TBTA ········· Type TA

Seat Material None ····· HYPATITE® PTFE1H** ······· FILLTITE®

3H** ······· Hard graphite seat for low abrasion service, 500˚C5H** ······· Metal seat for abrasive service, 300˚C6H** ······· Metal seat for high abrasive service, 500˚C** Type TDZ only

U/CN ··················· CN7MU/HB ··················· N-12MVU/HC ··················· CW-12MWSC/None/None* ··· WCB/CF8SC/None/M* ········ WCB/CF8MSC/CL/None* ······ LCC/CF8SC/CL/M* ············ LCC/CF8M

U/None ······ CF8U/M ··········· CF8MU/V ··········· CF3U/O ··········· CF3MU/CB ········· CF8CU/CG ········· CG8MU/CK ········· CK20U/SD ········· CD3MWCuN

No symbol suffixed for PTFE packing and gasket. "FS" or "S" suffixed for flexible graphite packing and gasket for super-firesafe provision

Valve operation measure１４

５

７

６３

２

３６

ASME pressure class150, 300, 600 or 1500

U: Symbol of stainless or high alloy steel SC: Symbol of carbon or low alloy steel

See

Product Coding for KITZ Flanged Ball Valves

＊1 Option for 2 to 4 Class 150 full port design.＊2 Option.

Design and Inspection Standards 1

KITZ Product Coding 1

Product Range 2

Pressure-Temperature Ratings 6

Design Features 12

KITZ HYPATITE® PTFE Ball Seats 15

KITZ Ball Seat Materials 16

Class 150/300 Carbon Steel (Split body) Ball Valves 17

Class 150/300 Carbon Steel (Uni-body) Ball Valves 18

Class 600/1500 Carbon Steel (Split body) Ball Valves 19

Class 150/300 Stainless Steel (Split body) Ball Valves 20

Class 150 Stainless Steel (Split body) Ball Valves 21

Class 150/300 Stainless Steel (Uni-body) Ball Valves 22

Class 600/1500 Stainless Steel (Split body) Ball Valves 23

Class 150 Low Temperature Service Ball Valves 24

Class 300 Low Temperature Service Ball Valves 25

Class 150 Stainless Steel 3-way Ball Valves 26

Class 150 Stainless Steel Pocketless Ball Valves 27

Class 150 Stainless Steel Jacketed Ball Valves 27

Class 150 Stainless Steel Tank Ball Valves 28

JIS 10K Stainless Steel PFA Lined Ball Valves 28

Type 600 Carbon Steel Ball Valves (Threaded) 29

Type 1500/2000 Carbon Steel Ball Valves (Threaded) 29

Type 1500/2000 Welded Body Carbon Steel Ball Valves (Threaded) 30

Class 800 Welded Body Carbon Steel Ball Valves (Threaded) 30

Type 3000 Welded Body Carbon Steel Ball Valves (Threaded) 30

Class 800 Carbon Steel Ball Valves (Welding) 31

Type 3000 Carbon Steel Ball Valves (Welding) 31

Type 1000 3-piece Carbon Steel Ball Valves (Threaded or Welding) 31

Type 1000 3-piece Carbon Steel Ball Valves (Threaded or Welding) 32

Type 600 Stainless Steel Ball Valves (Threaded) 32



Type 1500/2000 Stainless Steel Ball Valves (Threaded) 34

Type 1500/2000 Welded Body Stainless Steel Ball Valves (Threaded) 34

Type 1000 3-piece Stainless Steel Ball Valves (Threaded or Welding) 35

Type 1000 3-piece Stainless Steel Ball Valves (Threaded or Welding) 35

Type 800 Stainless Steel 3-way Ball Valves (Threaded) 36

Class 150 Stainless Steel Ball Valves (Threaded) 36

Dimensions of Actuator Mounting Pads 37

Construction and Materials 40

■Technical Information

Technical Features of KITZ HYPATITE® PTFE and SWELLESS® Ball Seats 50

General Precautions 52

Flow Characteristics 53

Steel Pipe Flanges 54

KITZ Steel Ball ValvesFloating Ball Design

The products introduced in this catalog are allcovered by ISO 9001 and 9002 certificationawarded KITZ Corporation, KITZ Corporation ofEurope, S.A. and KITZ Corporation of Taiwan.

Contents

KITZ Corporation of Taiwan, Kaohsiung Plant, Taiwan(ISO 9002)

KITZ Corporation of Europe, S.A., Barcelona Plant, Spain(ISO 9001)

KITZ Corporation, Ina Plant, Japan (ISO 9001)

KITZ Corporation, Nagasaka Plant, Japan(ISO 9001)

Ductile Iron

Cast Iron

＊ 1 Bore design: F=Full port, R=Reduced port＊ 2 Worm gear operation is standardised for the sizes marked ■ with the prefix “G-” on each KITZ product code. ＊ 3 Please contact KITZ Corporation for details.＊ 4 Refer to KITZ Ductile Iron Valves catalog (No. E-140) for detailes.＊ 5 Refer to KITZ Cast Iron Valves catalog (No. E-120) for detailes.＊ 6 Reduced port.

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

●

●

●

●

●

●

■

■

●

●

●

●

●

●

●

■

●

●

●

●

■

■

■

●

●

■

●

●

■

■

■

■

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

1／ 2

15

3／ 4

20

1

25

11／ 4

32

11／ 2

40

2

50

21／ 2

65

3

80

4

100

5

125

6

150

8

200

10

250

12

300Page

17

18

17

18

19

19

＊3

＊3

＊3

＊3

20

21

22

20

22

23

23

24

25

＊3

＊3

＊3

＊3

26

26

＊3

＊3

27

27

＊3

＊3

＊3

28

＊3

＊3

28

＊4

＊4

＊4

＊4

＊4

＊5

＊5

＊5

＊5

F

R

F

R

F

F

R

R

F

F

F

F

R

F

R

F

F

F

F

R

R

F

F

F

F

F

F

F

F

F

R

R

F

F

F

F

F

F

F

F

R

F

F

F

R

Split

Uni

Split

Uni

Split

Split

Split

Split

Split

Split

Split

Split

Uni

Split

Uni

Split

Split

Split/Extended bonnet

Split/Extended bonnet

Split

Split

Split

Split

Split/3-way･2-seat




Split/Pocketless

Jacketed

Jacketed

Jacketed

Jacketed

Split/Tank ball

Split/Tank ball

Split/PFA lined

Split/PFA lined

Split

Split/Gas service

Split/Gas service



Split

Split



Carbon Steel

150

150

300

300

600

1500

150

300

JIS 10K

JIS 20K

150

150

150

300

300

600

1500

150

300

150

300

JIS 10K

JIS 20K

150

150

JIS 10K

JIS 10K

150

150

JIS 10K

150

JIS 10K

150

JIS 10K

150

JIS 10K

JIS 10K

JIS 10K

JIS 20K

JIS 10K

JIS 10K

125

JIS 10K

JIS 10K

JIS 10K

Flanged Floating Ball Valves

Bore＊ 1

Size

BodyDesign

ShellMaterial Class KITZ Product Code

150SCTDZ

150SCTA

300SCTDZ

300SCTA

600SCTB

1500SCTB

150SCTR

300SCTR

10SCTDZ

20SCTDZ

150UTDZM

150UTBM

150UTAM

300UTDZM

300UTAM

600UTBM

1500UTBM

150UTDZXL

300UTDZXL

150UTRM

300UTRM

10UTDZM

20UTDZM

150UTB2LM/2TM

150UTB4LAM/4TAM

10UTB2LM/2TM

10UTB4LAM/4TAM

150UTBPM

150UTBJM

10UTBJM

150UTRJM

10UTRJM

150UTBTM

10UTBTM

150UTBLN

10UTBLN

10STBF

10STLBF

20STLB

10STB4LAF/4TAF

10STR4LAF/4TAF

125FCTB

10FCTB

10FCTB2L

10FCTR2L

in.

mm

Stainless Steel

＊2

＊6

＊6

＊6

＊6

＊6

＊6

＊6

＊6

KITZ Steel Ball Valves, Floating Ball Design

■Product Range

2


3

■Product Range

＊ 1 Bore design: F=Full port＊ 2 Operation: L=Lever, G=Gear ＊ 3 Worm gear operation is standardised for the sizes marked ■ with the prefix “G-” on each KITZ product code. ＊ 4 Refer to KITZ Λ -port Quarter-Turn Control Valves catalog (No. E-203) for detailes.＊ 5 Refer to KITZ Steel Ball Valve for High Temperature (No. E-204) for detailes.＊ 6 Please contact KITZ Corporation for details.

∧ -port

Stainless Steel

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

●

■

■

●

●

■

■

●

●

■

■

●

●

■

■

●

●

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

1／ 2

15

3／ 4

20

1

25

11／ 4

32

11／ 2

40

2

50

21／ 2

65

3

80

4

100

5

125

6

150

8

200

10

250

12

300

14

350

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

＊4

＊4

＊4

＊4

＊4

＊4

＊4

＊4

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

＊5

GraphiteSeated

CarbonandStainlessSteel

MetalSeated


MetalSeated


F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

F

Split/For control

Split/For control

Split/For control

Split/For control

Split/For control

Split/For control

Split/For control

Split/For control

150

150

300

300

JIS 10K

JIS 10K

JIS 20K

JIS 20K

150

150

300

300

JIS 10K

JIS 10K

JIS 20K

JIS 20K

L-150UVC（T）M＊2

G-150UVC（T）M＊2

L-300UVC（T）M＊2

G-300UVC（T）M＊2

L-10UVC（T）M＊2

G-10UVC（T）M＊2

L-20UVC（T）M＊2

G-20UVC（T）M＊2

Flanged High Performance Ball Valves

PageBore＊ 1

Size

BodyDesign


in.

mm

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 425℃

Split/Max. 425℃

150

150

300

300

600

600

JIS 10K

JIS 10K

JIS 20K

JIS 20K

150SCTDZ6H

150UTDZ6HM

300SCTDZ6H

300UTDZ6HM

600SCTB6H

600UTB6HM

10SCTDZ6H

10UTDZ6HM

20SCTDZ6H

20UTDZ6HM

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

150

150

300

300

JIS 10K

JIS 10K

JIS 20K

JIS 20K

150SCTDZ5H

150UTDZ5HM

300SCTDZ5H

300UTDZ5HM

10SCTDZ5H

10UTDZ5HM

20SCTDZ5H

20UTDZ5HM

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 500℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 425℃

Split/Max. 425℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

Split/Max. 300℃

150

150

300

300

JIS 10K

JIS 10K

JIS 20K

JIS 20K

150SCTDZ3H

150UTDZ3HM

300SCTDZ3H

300UTDZ3HM

10SCTDZ3HM

10UTDZ3HM

20SCTDZ3H

20UTDZ3HM

150SCTDZ1H

150UTDZ1HM

300SCTDZ1H

300UTDZ1HM

10SCTDZ1H

10UTDZ1HM

20SCTDZ1H

20UTDZ1HM＊3

FILLTITE

® Seated Carbon

Steel and Stainless Steel

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

■

●

●

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

4


■Product Range

●Trunnion Mounted Ball Valves

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

■

●

●

●

●

■

●

●

●

■

■

●

●

●

■

■

●

●

■

■

■

●

●

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

■

Page6 8 10 12 14 16 18 20 22 24 26 28 32 34

100 150 200 250 300 350 400 450 500 550 600 650 700

30

750 800 850

36

900

2

50

3

80

4

F

F

F

F

F

Super-firesafe＊ 3

Super-firesafe＊ 3

Super-firesafe＊ 3

Super-firesafe＊ 3

Super-firesafe＊ 3

StainlessSteel

150

300

600

900

1500

150UTCSM

300UTCSM

600UTCSM

900UTCSM

1500UTCSM

＊ 4

＊ 4

＊ 4

＊ 4

＊ 4

＊ 4

＊ 4

＊ 4

＊ 4

＊ 4

F

F

F

F

F

Super-firesafe＊ 3

Super-firesafe＊ 3

Super-firesafe＊ 3

Super-firesafe＊ 3

Super-firesafe＊ 3

CarbonSteel

150

300

600

900

1500

150SCTCS

300SCTCS

600SCTCS

900SCTCS

1500SCTCS

Flanged Trunnion Mounted Ball Valves

＊ 1 Bore design: F=Full port (Reduced port type is also available.)＊ 2 Worm gear operation is standard for the sizes marked with the prefix “G-” on each KITZ product code. ＊ 3 Non firesafe types are also available.＊ 4 Refer to KITZ Trunnion Mounted Ball Valves catalog (No. E-202) for details.

Bore＊ 1

Size

BodyDesign

ShellMaterial Class

KITZProductCode

in.

mm＊ 2

＊ Please contact KITZ Corporation for details.

1／ 2

15

3／ 4

20

1

25

11／ 4

32

11／ 2

40

2

50

21／ 2

65

3

80

4

100

5

125

6

150

8

200

10

250

12

300

14

350

＊

＊

＊

＊

Flanged High Performance Ball Valves

PageBore＊ 1

Size

BodyDesign


in.

mm

■

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

F

F

F

F

Split

Split

Split

Split

Titanium

150

300

JIS 10K

JIS 20K

150TTB

300TTB

10TTB

20TTB

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

29

30,31

31

32

29

30

30,31

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

32

33

33

36

35

35

34

34

36

＊5

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

●

● ● ●

＊6

＊6

＊7

Page3

80

21／2

65

2

50

11／2

40

11／4

32

1

25

3／4

20

1／2

15

3／8

10

1／4

8

D

R

F

R

F

R

R

R

F

F

R

R

R

Uni/Threaded ends

Split /Threaded ends


Split/3-way･4-seat/Threaded ends

3-piece/Threaded or Socket or welded ends

3-piece/Threaded or Socket or welded ends


Seal welded/Threaded ends






600WOG

1500/2000WOG

1500/2000WOG

150

JIS 10K

JIS 20K

400WOG

JIS 10K

800WOG

1500WOG

800WOG

1000WOG

1000WOG

UTKM＊2

UTHM＊2

UTFM＊2

UTH4LM/4TM

U3TZFM＊3

U3TZM＊3

AKUTHZM＊4

AKUTHWZM＊4

AK150UTM＊4

10UTM

20ST

STZ

10FCT

5


■Product Range

D

R

F

R

R

R

R

Uni/Threaded ends

Seal welded/Threaded or Socket welded ends

3-piece/Threaded or Socket welded ends

3-piece/Threaded Socket or welded ends


Seal welded/Threaded ends

Seal welded/Threaded or Socket welded ends

CarbonSteel

StainlessSteel

Ductile

Iron

Cast

Iron

600WOG

1500/2000WOG

1500/2000WOG

3000WOG

800

1000WOG

1000WOG

Threaded or Welded Ball Valves

Bore＊1 Size

Body Design


SCTK＊2

800SCTK＊3

SC3TZF＊3

SC3TZ＊3

AKSCTHZM＊4

AKSCTHWZM＊4

3000SCTK＊3

in.

mm

＊1 Bore design: F=Full port, R=Regular port, D=Reduced port＊2 Rc threaded ends are standard. Prefix “AK” means NPT threaded end. ＊3 Rc threaded ends are standard. Prefix “AK” means NPT threaded ends and “AW” means socket welded ends. ＊4 NPT threaded ends are only available.＊5 Please contact KITZ Corporation for details.＊6 Refer to KITZ Ductile Iron Valves catalog (No. E-140) for detailes.＊7 Refer to KITZ Cast Iron Valves catalog (No. E-120) for detailes.

●Λ-port Ball Valves

6


■Pressure-Temperature Ratings

The pressure-temperature ratings of ball valves are determined,not only by valve shell materials, but more essentially by sealingmaterials, used for ball seats, gland packing and gaskets.Sealing materials may be high molecule, or rubber, but thechoice is limited by the characteristics of the service fluid,working temperatures, working pressures, velocity of fluid, andoperational frequency of valves.As it is very difficult to predetermine the exact pressure-temperature rating for all kinds of fluid under all imaginableconditions, we have prepared general rating charts for non-

shock fluid service here, based on our past experiences both inthe field and in our laboratory.In case of extraordinary service conditions as mentioned below,contact KITZ Corporation or its distributors for technical advice:

1. Valves shall be left fully closed for a long period of time underhigh temperature or high differential pressure.

2. Valves shall be frequently operated under high temperatureor high differential pressure.

3. Frequent change of line pressure or temperature.

HYPATITE® PTFE is the standard seat material for KITZ ball valves. Specify virgin PTFE or carbon-filled PTFE when required. The body ratings shownhere are for ASTM A216 Gr. WCB and A351 Gr. CF8M. For the pressure ratings of other valve shell materials, refer to the latest edition of ASME B16.34.

FILLTITE® is a specially reinforced ball seat, made by using carbon based fillers into PTFE at higher rate than conventional carbon filled PTFE, whichgreatly improves heat and abrasion resistance. The material shows excellent operability, durability, chemical resistance and sealing performance at a hightemperature of 300℃. In addition, the ball seat is replaceable with the most of our conventional ball seats, so it also has the cost advantage.

7



MPa

Pre

ssur

e

（°C）

（°F）

0

1

2

3

4

5

6

7

8

0

1

2

3

4

5

6

7

8

－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000

1160psi

572500400300200100－20

0

1

2

3

4

5

6

7

8

0

1

2

3

4

5

6

7

8

200

400

600

800

1000

1160psi

psipsiMPa

Pre

ssur

e

（°C）

（°F）

－29 0 50 100 150

Temperature

200 250 300

psi

572500400300200100－20

MPa

Pre

ssur

e

（°C）

（°F）

－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000

1160

200

400

600

800

1000

1160

0

572500400300200100－20

MPa

Pre

ssur

e

（°C）

（°F）

－29 0 50 100 150

Temperature

200 250 3000

psi

572500400300200100－20

0

1

2

3

4

5

6

7

8

200

400

600

800

1000

1160psiMPa

Pre

ssur

e

（°C）

（°F）

－29 0 50 100 150

Temperature

200 250 3000

572500400300200100－20

Class 300 WCB body rating

Class 300 WCB body ratingClass 300 CF8M body rating


150/300 UTDZM/SCTDZ: 1／2˝, 3／4˝ 150/300 UTDZM/SCTDZ: 1˝～21／2˝

150/300 UTDZM/SCTDZ: 3˝, 4˝ 150/300 UTDZM/SCTDZ: 5˝, 6˝

150/300 UTDZM/SCTDZ: 8˝, 10˝


A B C

A B C

A B C

A B C

A B C

Seat: A : Virgin PTFEB : HYPETITE® PTFEC : FILLTITE®






Class 300 CF8M body rating








6.96.26.1

270 270

270

270

270

6.2

5.3

5.25.2


8


6.086.20 6.20

MPa

5.88

5.11

3.92

Pre

ssur

e

1.96

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100－20

A B C

5.30

5.88

MPa

5.005.11

3.92

Pre

ssur

e

1.96

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100－20

5.88

MPa

5.115.20 5.20

3.92

Pre

ssur

e

1.96

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100－20

5.88

MPa

5.11

3.92

Pre

ssur

e

1.96

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100－20

Seat: A : Virgin PTFEB : HYPETITE® PTFEC : FILLTITE®* FILLTITE® is only applicable to SCTA/UTAM series.






A B C


A B C

A B C



150 UTBM : 1／2˝ & 3／4˝ *150/300 SCTA/UTAM : 1／2˝ to 1˝

150 UTBM : 1˝ to 21／2˝ *150/300 SCTA/UTAM : 11／2˝ to 3˝

150 UTBM : 5˝ & 6˝ *150/300 SCTA/UTAM : 8˝ & 10˝

150 UTBM : 3˝ & 4˝ *150/300 SCTA/UTAM : 4˝ & 6˝





5.88

MPa

5.11

3.92

Pre

ssur

e

1.96

0.92

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100－20

Seat: A : Virgin PTFEB : HYPETITE® PTFE

A B

150 UTBM : 8˝ & 10˝




9


1.5

2.0MPa

1.0

Pre

ssur

e

0.5

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

50

100

150

200

290

250

psi

572500400300200100

0760 Torr

100Torr0Torr

50

100

150

200

250

290psi

Ball Seat Materials①: KITZ HYPATITE® or

Carbon-filled PTFE②: Glass-filled PTFE with MoS2③: Virgin PTFE④: Nylon with MoS2

O-ring Upper Limit⑤: （1）FKM（2）Low-temperature FKM⑥: （1）EPDM（2）ECO（Epichlorohydrin Copolymer） ⑦: （1）NBR（2）Low-temperature NBR

O-ring Lower Limit⑧: FKM* O-rings made of others than FKM can wichstand -29˚C (-20˚F)

24.52

MPa

19.61

14.71

Pre

ssur

e

4.90

9.8110.79

0 0

500

1000

1500

2000

3000

2500

3500

psi

2.01.9

MPa

1.5

1.0

Pre

ssur

e

Deg

ree

of v

acuu

m (

Torr

)

0.5

（°C）

（°F）

0

－29 0 50 100

Temperature

150

300150 200 25010050－20 0

－20 0

－20 0

（°C）

（°F）

－29－20 0 50 80 100 120 170150

Temperature

200 250

50040030020010050 450350250150

③

⑦

⑥ ⑧

⑤ ④

①

②





MPa

Pre

ssur

e

1.0

2.0

3.0

4.0

5.05.3

6.0

6.97.0

8.0

0 0

500

1000

1500

2000

3000

2500

3500

psi

－155

（°C）

（°F）

－104 －50 0 50

Temperature

100 150

300200100－50 250150500

Seat: HYPATITE® PTFE


＊Refer to 150UTBM ratings for 150UTB2LM/2TM


150/300 UTDZXL

Max. velocity:Liquid・・・・3m/secGas・・・・・・30m/secSeat: HYPATITE® PTFE

15A～20A

25A～65A 80A, 100A

125A, 150A

200A, 250A

ASME B16, 34-1996 Class 300 CF8

ASME B16, 34-1996 Class 150 CF8

10



Type 600:SCTK/UTKM

MPa

4.90

4.12

5.88

6.86

3.92

2.94Pre

ssur

e

1.96

0.98

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100

Type 1000:UTFM

MPa

4.90

5.88

6.86

3.92

2.94Pre

ssur

e

1.96

0.98

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psig

572500400300200100

Type 800:UTHM

MPa

4.90

5.495.88

6.86

3.92

2.94Pre

ssur

e

1.96

0.98

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

200

400

600

800

1000psi

572500400300200100

0

200

400

600

800

1000psi

Class 800 and Type 3000:SCTK

Type 1000:SC3TZ/U3TZ SeriesType 800:UTH4LM/4TM

MPa

14.71

19.6120.59

13.73

9.81

Pre

ssur

e

6.86

4.90

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

1000

2000

3000

psi

572500400300200100

* Polychloro-Trifluoro-Ethylene

MPa

7.85

9.80

5.88

6.86

3.92

Pre

ssur

e

1.96

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

500

1000

1500

psig

572500400300200100－20 0－20 0

－20 0－20 0

－20 0－20 0

Note: Type 1500 is optionally available

BS Class 800 body rating

3000WOG ②

Class 800 ①

MPa

1.47

1.962.0

2.45

0.98

Pre

ssur

e

0.49

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 300

572500400300200100

Max. velocity:Liquid・・・・3m/secGas・・・・・・30m/secSeat: HYPATITE® PTFE



Seat: Reinforced PTFE

Seat: PTFE Seat: 1 : PTFE2 : PCTFE*

11



Type 1500/2000:AKSCTHZM/AKSCTHWZM/AKUTHZM/AKUTHWZM Class 150:AK150UTM

MPa

1.37

2.94

Pre

ssur

e 1.96

0.98

（°C）

（°F）

0－29 0 50 100 150

Temperature

200 250 3000

1003.43 500

6.86 1000

10.30 1500

13.73 2000

250017.16

200

300

400

psi

572500400300200100

MPa

Pre

ssur

e

（°C）

（°F）

0

Temperature

0

psi

5004003002001000 －20 0

Seat: HYPATITE® PTFESeat: PTFE

0 50 100 150 200 250

12


Bubble-tight sealing performance withHYPATITE® PTFE ball seatsHYPATITE® PTFE ball seats, standard stem seals of KITZ ballvalves, are made of denatured PTFE, a molecularly reinforcedPTFE copolymer, and specifically engineered for high bi-directional sealing performance and prolonged service life ofvalves. Its resistance to high or low temperature, creep orcompression, abrasion and corrosion is all outstanding. As anoption, KITZ SWELLESS® ball seats principally made of PFAare recommended specifically for monomer service. Thisepoch-making new seat maximizes resistance to thepermeation of monomer into its molecular structure (generallyknown as a “swelling” problem) which causes seat deformationand seriously affects shut-off function of valves in styrene andbutadiene monomer service.

Simplified actuator mountingFor 150/300 SCTDZ/UTDZM and SCTA/UTAM Series ballvalves, ISO 5211 actuator mounting pad is integrally providedfor uniformly simplified mounting of any actuators provided withvalve mounting flanges designed to ISO 5211 dimensionalrequirement. 150UTBM Series ball valves are provided withKITZ standard integral actuator mounting pad.

Easy maintenanceSplit body design for KITZ SCTDZ/UTDZM Series provides theconvenience of very easy maintenance critically required forprocess plants. Body inserts of uni-body, end entry design forKITZ 150/300 SCTA/UTAM Series are threaded into the valvebody with provision of unthreading for valve disassembly incase of maintenance operation.

KITZ 150/300 SCTDZ/UTDZM SeriesFull Port, Split Body, Side Entry Ball Valves

This is an illustrated cross-section of a typical KITZ split bodyfloating type full port ball valve to exhibit the basic designconcept. The actual design of a valve may be slightly differentfrom this illustration, depending on its size and pressure class.

Low emission (ISO 15848/EPA Method 21)stem packing

Upper and lower stem bearing

Thrust washer

Metal-to-metalcontact for fire safe

Low emission body seal gasket

ISO 17292 position stops

Key lock plate

Live loading spring

ISO5211 actuator mounting pad

Stem head conform with CAPI ADDS2.02 dimension(Double “D” designparallel to flowpassage)

Antistatic device

Precisionmachined ball

Body

HYPATITE® PTFEball seat with cavitypressure reliefprovision

Body cap

2˝ KITZ 150UTDZ

Note:Dimension of stem head are in accordancewith CAPI ADDS 2.02, but the maximumspecified dimension in CAPI ADDS 2.02 is“F14”For NPS 8 and 10, mounting pads are F16/ISO 5211.

13


For sour serviceHardness of body, body cap/insert, ball and stem materi-al of KITZ Class 150/300 steel ball valves are controlledby appropriate heat treatment and conformed to thehardness requirements in NACE MR0103, as standard.In addition to the above, following requirements are op-tionally available.-Bolting for valves exposed to sour environment.-NACE requirements for Class 600 and higher steel ballvalves.Please contact KITZ for those requirements.

Extensive safety considerationsKITZ ball valves are designed with extensive safety consider-ations for users. Blow-out proof stems, provision of lockingdevices and prevention of misalignment of lever handlesprovide safe handling in the field and trouble-free operation inthe plant. Antistatic devices, firesafe seal design and cavitypressure relief features all assure the economic benefits ofsmooth, steady plant operation. KITZ advancements in lowemission design features contribute to the global battle againstfugitive emissions while greatly reducing costs caused byproduct loss.

KITZ 150/300 SCTA/UTAM SeriesReduced Port, Uni-body, End Entry Ball Valves

This is an illustrated cross-section of a typical KITZ uni-bodyfloating type reduced port ball valve to exhibit the basic designconcept. The actual design of a valve may be slightly differentfrom this illustration, depending on its size and pressure class.

Stopper pin

Low emissionstem packing

Antistatic device

Thrust washer

Blowout-proofstem collar

Gland nut

Stem head(Double “D” designparallel to flowpassage)

Integral ISO 5211Actuator mountingpad

Stem bearing

Emission-freePTFE primarygasket

Flexible graphitesecondary gasket(Fire safe type only)

HYPATITE® PTFEball seat with cavitypressure reliefprovision

Metal-to-metalfiresafe contact

11/2˝ KITZ 150SCTA

Key lock plate

Bellevillespring washerfor live loading

Precisionmachined ball

Body insert

Body

Fig. 1 Fig. 2

Top of stem Handle

Flow direction

Ball

BodyStem

Antistaticdevices

Stem Collar

Fig. 7 (Before fire)

Fig. 9 (Uni-body insert)

Fig. 8 (After fire)

Ball Ball

Metal-to-metalcontact

Gasket

Flexible graphitegasket for super-firesafe provision

Emission-freePTFE primarygasket



Fig. 4 (After fire)

Fig. 6 (After fire)


Body


Body

Seat

Packing

Bearing

Washer

Stem Gasket

14


1. Double “D” stem head design provides mountingof the lever handle always in parallel to the flowpassage. Misaligment of the handle is thusprevented. (Fig. 1)

2. The lower end of the stem is designed with anintegral collar to be blowout-proof. It also func-tions as the backseat for assured stem sealing.(Fig. 2)

3. An antistatic feature is provided to ensureelectrical continuity between ball, stem, and body.(Fig. 2)

4. Facility for mounting a locking device for preven-tion of accidental valve operation is provided.

5. Plant fires are a serious concern for soft-seatedball valves because of possible fluid leakage andconsequent increase of the fire magnitude causedby deterioration of resilient sealing materials.

KITZ ball valves are engineered for firesafety andsuccessfully fire tested to minimize both externaland internal fluid leakage after plant fires. Theyhave post-fire metal-to-metal contact of all sealingareas such as:

■ Contact between ball and valve shell(Fig. 3 & 4)

■ Contact between stem and valve shell(Fig. 5 & 6)

■ Valve shell coupling flanges of split body design (Fig. 7 & 8)

■ Contact between valve body and insert of uni-body design (Fig. 9)

The problem of external fluid leakage is moreserious than internal leakage through the valvebore because of the fear of fueling the fire. Toprevent this, KITZ ball valves may be ordered withflexible graphite packing and gaskets, whichare extremely heat resistant, and not affected bythe fire.

6. The surface of stem and stuffing box, and interfaceclearance of stem-to-gland, stem-to-body andgland-to-stuffing box are precision controlled onmachining and assembly for low emission service.A Belleville spring washer is employed for liveloading on gland packing rings, to minimize needof gland retightening for low emission service.

7. A provision of cavity pressure relief is incorporat-ed into precision engineered KITZ HYPATITE®PTFE ball seats for the ultimate safety. Refer toPage15 for details.

Seven Safety Considerationsfor KITZ 150/300 SCTDZ/UTDZM 150UTBM and 150/300 SCTA/UTAM Series Ball Valves

As the primary body seal, emissionfree PTFE gasket is alwaysprovided. Flexible graphite gasketmay be additionally employed asthe secondary body seal for super-firesafe provision.

15


KITZ 150/300 SCTDZ/UTDZM series and 150/300SCTA/UTAM series ball valves are furnished with anintegral actuator mounting pad designed and factory-drilled according to ISO 5211 specification. Thiseasily and uniformly enable mouthing of any actuatorsprovided with ISO 5211 valve mounting flanges.Mounting pad and stem head dimension alsoconforms to CAPI ADDS 2.02.

Note: Customers are requested to prepare mountingbrackets and connectors for the actuators chosenfor their valve automation. Actuators can bemounted on KITZ ball valves without disassembly ofvalve glands.

Integral Actuator Mounting Pads Actuator mounting pad

Actuator mounting pad

Actuator mounting pad

Split body design Uni-body design

KITZ ball valves are furnished, as the manufacturer’sstandard, with HYPATITE® PTFE ball seats made ofdenatured PTFE, a molecularly reinforced PTFEcopolymer, and specially engineered for highperformance which include:

■ Wide service temperature range of －29 C゚ (－20 F゚)through 270 C゚ (518 F゚) SCTDZ/UTDZM Series,260 C゚ (500 F゚) UTB and SCTA/UTAM Series.This is for standard valve design and materials used formedium to high temperature services. The lower temper-ature range can be extended down to －196 C゚ (－321 F゚)by means of extended bonnet design and special lowtemperature service materials.

■ High chemical resistance is comparable to virginPTFE.

■ Monomer permeability is lower than other PTFEmaterials.

■ Resistance against compression and creeping (cold flow) ishigher than other PTFE materials to guarantee long life cycle.

■ Specific gravity and friction coefficient are equal to those ofvirgin PTFE for smooth valve operation.

■ Purity of processed products is guaranteed as highly asvirgin PTFE.

■ Resiliency is as high as other PTFE materials for bubble-tightsealing performance.

★ Refer to Page 50 for more technical deta.

HYPATITE® PTFE Ball Seatsgroove

Front Rear

A typical HYPATITE® PTFE seat used for 4" KITZ 150SCTDZ ball valves.

notchnotch

Some line fluid is usually left trapped inside the ball-body cavity.This fluid can expand under the influence of high ambient or linetemperature. An abnormal increase of such cavity pressure maysometimes damage the valve seats or balls, unless the valvehas an adequate cavity pressure relief provision. Trunnionmounted ball valves generally provide perfect protection fromthis problem. Refer to KITZ Cat. No. E-202 for technical detailsof KITZ trunnion mounted ball valves.

In case of floating ball valves, however, their rather simpleseating principle requires some special protection fromexcessive cavity pressure rise when highly volatile liquid inservice is subject to frequent and large temperature variation,while the valve is not frequently operated. KITZ 150/300

SCTDZ/UTDZM and 150/300 SCTA/UTAM Series ball valvesoffer self-relieving of excessive cavity pressure as a standardfeature engineered in HYPATITE® PTFE ball seats.

Other general solutions for floating ball valves includeemployment of automatic pressure relief valves or drillingpressure equalization holes on the ball. If the requirement ofautomatic cavity pressure relief is as critical as in chlorineservice, be sure to contact KITZ Corporation or its distributors fortechnical advice.

This capability is influenced by many variables including: fluidcharacteristics, variations in pressure, temperature and thermalcycles.

In addition to the standard HYPATITE® PTFE ball seats,SWELLESS® seats are recommended for monomer service.Also virgin PTFE and carbon filled PTFE seats are optionallyavailable for versatility in service applications. Refer to Page 16for details.

Optional Ball Seats

Cavity Pressure Relief

Higher heat resistance and mechanicalstrength 270℃PEEK

Modified PFA excellent for monomerservice such as butadiene and styrene 260℃SWELLESS

®

Higher abrasion resistance and operationefficiency 230℃Glass fiber filled PTFE with MoS2

Higher mechanical strength 140℃Nylon with MoS2

16


Features

High chemical resistance and operationefficiency

Maximum Service Temperature

200℃Virgin PTFE

Monomer permeability is lower andresistance against compression andcreeping is higher than other PTFE materials

260℃/270℃＊1HYPATITE® PTFE

Excellent heat and abrasion resistance 260℃/270℃＊1Carbon filled PTFE

Highest heat resistance among PTFEbased materials 300℃

＊2＊FILLTITE®

Excellent for high temperature service 500℃Graphite

Excellent for high temperature andabrasive service 500℃Metal

Material

The following seat materials are available.

■KITZ Ball Seat Materials

＊：FILLTITE® is a specially reinforced ball seat, made by using more carbon based fillers into PTFE than conventional carbon filled PTFE, whichgreatly improves heat and abrasion resistance. The material shows excellent operability, durability, chemical resistance and sealing performanceat a high temperature of 300℃. In addition, the ball seat is replaceable with the most of our conventional ball seats, so it also has the costadvantage.

＊1 270℃: SCTDZ/UTDZM Series only.＊2 Uni-body design: 260℃

17


Class 150/300 Carbon Steel Ball Valves

D

H

L

Features●Antistatic device●Blowout-proof stem●Fire test certification★ (API 607, ISO 10497)●Stem head conform with CAPI ADDS2.02 dimension●High performance HYPATITE® PTFE ball seats●Actuator mounting pad to ISO 5211

Page 7 for Pressure-Temperature Ratings

Page 40 for Construction and Materials

Page 37 for Dimension of Actuator Mounting Pad

Full port, Split body, Side entry design

Valve operator1/2́ ´～8́´: Lever operation6́´～8́´: Optional gear operation10: Standard gear operation

Options★Flexible graphite packing and gasket

(See Page 14 and 40)●Ball and stem to CF8M (316)

Valve operator1/2́ ´～8́´: Lever operation6́´～8́´: Optional gear operation



Worm gear operators may be mounted on KITZball valves at your option for the smoothestvalve operation. Electric or pneumatic actuatorsare also optionally available. Contact KITZdistributors for appropriate choice and sizing ofvalve actuators.

150SCTDZ

D

H

L

300SCTDZ

A

H

D

C

1

25

24

165

124

160

F05

11／ 2

40

38

190

134

230

F07

2

50

50

216

143

230

F07

21／ 2

65

64

241

179

400

F10

3

80

76

283

189

400

F10

4

100

100

305

251

750

F12

5

125

123

381

267

750

F12

6

150

151

403

315

1000

F14

8

200

202

502

406

1500

F16

3／ 4

20

19

152

111

130

F03

1／ 2

15

14

140

108

130

F03

GearoperationGearoperation

150

322

412

448

300

335

412

－

150

310

360

500

300

360

360

－

150

165

210

363

300

210

210

－

150

66.5

88.5

93.5

300

88.5

88.5

－

150 300

Gear Operator

H D C A

6

8

10

6

8

Ball Bore

L

H

D

ISO 5211 flange type

Valve Size

Unit: mmDimensions of 300SCTDZin.

mm

1

25

24

127

124

160

F05

11／ 2

40

38

165

134

230

F07

2

50

50

178

143

230

F07

21／ 2

65

64

190

179

400

F10

3

80

76

203

189

400

F10

4

100

100

229

224

460

F12

5

125

123

356

240

460

F12

6

150

151

394

315

1000

F14

8

200

202

457

406

1500

F16

10

250

F16

3／ 4

20

19

117

111

130

F03

1／ 2

15

14

108

108

130

F03

Ball Bore

L

H

D


Valve Size

Unit: mmDimensions of 150SCTDZ

in.

mm

Valve Size (inch)

Class

Gear Operation Unit: mm

●Conform to NACE MR0103 for hardness of body, body cap, stem and ball.

1

25

11／2

40

2

50

3

80

4

100

6

150

8

200

10

2502015

3／41／2

1

25

11／2

40

2

50

3

80

4

100

6

150

8

200

10

250

3／4

20

1／2

15

A

H

D

C

18


17

165

100

160

30

190

127

180

38

216

132

230

58

283

197

400

76

305

213

400

114

403

246

750

144

419

293

1000

187

457

346

1500

12.5

152

91

140

10

140

89

140

257

306

364

300

300

400

283

283

337

71

71

86

150 300Gear Operator

H D C A

6

8

10

6

8

10


D

H

L

Features●Antistatic device●Blowout-proof stem●Fire test certification★ (API 607)●Double “D” stem head●High performance HYPATITE® PTFE ball seats●Actuator mounting pad to ISO 5211



Page 38 and 39 for Dimension of Actuator Mounting Pad

Regular port, Uni-body, End entry design

Valve operator1/2́ ´～10´́ : Lever operation6´́～10´́ : Optional gear operation



Unit: mmDimensions of 150SCTA

Valve operator1/2́ ´～10´́ : Lever operation6´́～10´́ : Optional gear operation



Ball Bore

L

H

D

Valve Size

Unit: mmDimensions of 300SCTA

in.

mm

17

127

100

160

30

165

127

180

38

178

132

230

58

203

197

400

76

229

213

400

114

267

246

750

144

292

293

1000

187

330

346

1500

12.5

117

91

140

10

108

89

140

Ball Bore

L

H

D

Valve Sizein.

mm

Worm gear operators may be mounted on KITZball valves at your option for the smoothestvalve operation. Electric or pneumatic actuatorsare also optionally available. Contact KITZdistributors for appropriate choice and sizing ofvalve actuators.Valve Size

(inch)

Class

Gear Operation

150SCTA

D

H

L

300SCTA

Unit: mm

●Conform to NACE MR0103 for hardness of body, body insert, stem and ball.

1／2

15

13

165

105

130

3／4

20

19

190

108

130

1

25

25

216

130

160

11／2

40

38

241

118

230

1／2

15

13

216

132

160

3／4

20

19

229

117

230

1

25

25

254

123

230

11／2

40

38

305

157

400

Ball Bore

L

H

D

19



D

H

L

Features●Antistatic device●Blowout-proof stem●Fire test certification★ (API 607)●Double “D” stem head●Ball seats: Reinforced PTFE with MoS2 for Class 600

Nylon with MoS2 for Class 1500


Page 45 and 47 for Construction and Materials


Valve operatorLever operation

Options★Flexible graphite packing and flexible

graphite spiral wound gasket(See Page 14 and 45)

●Ball and stem to 316

Unit: mmDimensions of 600SCTB


Options★Flexible graphite packing and flexible


●Ball and stem to 316

Unit: mmDimensions of 1500SCTB

Ball Bore

L

H

D

Valve Sizein.

mm

Valve Sizein.

mm

600SCTB

D

H

L

1500SCTB

20


Class 150/300 Stainless Steel Ball Valves

D

H

L

Features●Antistatic device●Blowout-proof stem●Fire test certification★(API 607, ISO 10497)●Stem head conform with CAPI ADDS 2.02 dimensions●High performance HYPATITE® PTFE ball seats●Actuator mounting pad to ISO 5211



Page 37 for Dimension of Actuator Mounting Pad


Valve operator1/2́ ´～8́´: Lever operation5́´～8́´: Optional gear operation10́´: Standard gear operation

Option★Flexible graphite packing and gasket

(See Page 14 and 42)




Worm gear operators may be mounted on KITZball valves at your option for the smoothestvalve operation. Electric or pneumatic actuatorsare also optionally available. Contact KITZdistributors for appropriate choice and sizing ofvalve actuators.

150UTDZMD

H

L

300UTDZM

150

322

412

448

300

335

412

－

150

310

360

500

300

360

360

－

150

165

210

363

300

210

210

－

150

66.5

88.5

93.5

300

88.5

88.5

－

150 300

Gear Operator

H D C A

6

8

10

6

8Valve Size (inch)

Class

Gear Operation Unit: mmA

H

D

C

100

305

251

750

F12

4

100

123

381

267

750

F12

5

125

151

403

315

1000

F14

6

105

202

502

406

1500

F16

8

200

1／ 2

15

14

140

108

130

F03

3／ 4

20

19

152

111

130

F03

1

25

24

165

124

160

F05

11／ 2

40

38

190

134

230

F07

11／ 4

32

32

178

128

160

F05

2

50

50

216

143

230

F07

21／ 2

65

64

241

179

400

F10

3

80

76

283

189

400

F10

GearoperationGearoperation

1／ 2

15

14

108

108

130

F03

3／ 4

20

19

117

111

130

F03

1

25

24

127

124

160

F05

32

140

128

160

F05

11／ 2

40

11／ 4

32

38

165

134

230

F07

2

50

50

178

143

230

F07

21／ 2

65

64

190

179

400

F10

3

80

76

203

189

400

F10

4

100

100

229

224

460

F12

5

125

123

356

240

460

F12

6

150

151

394

315

1000

F14

8

200

202

457

406

1500

F16

10

250

F16

Ball Bore

L

H

D


Valve Size

Unit: mmDimensions of 150UTDZM

in.

mm

Ball Bore

L

H

D


Valve Size

Unit: mmDimensions of 300UTDZM

in.

mm

●Conform to NACE MR0103 for hardness of body, body cap, stem and ball.

21


A

H

D

C

Gearoperation

Gearoperation

1／2

15

15

108

102

130

3／4

20

20

117

105

130

1

25

25

127

124

160

11／2

40

40

165

115

230

2

50

50

178

120

230

21／2

65

65

190

155

400

3

80

80

203

165

400

4

100

100

229

200

460

5

125

125

356

220

460

6

150

150

394

295

1000

8

200

200

457

355

1500

10

250

250

533

312

337

414

477

310

310

360

500

165

165

210

363

65.5

65.5

88.5

93.5

150Gear Operator

H D C A

5

6

8

10

Class 150 Stainless Steel Ball Valves

D

H

L

Features●Antistatic device●Blowout-proof stem●Double “D” stem head●High performance HYPATITE® PTFE ball seats




Valve operator1/2́ ´～8́´: Lever operation5́´～8́´: Optional gear operation10́´: Standard gear operation

Ball Bore

L

H

D

Valve Size

Unit: mmDimensions of 150UTBM

in.

mm


(inch)

Class

Gear Operation

150UTBM

Unit: mm

22


1

25

11／2

40

2

50

3

80

4

100

6

150

8

200

10

2502015

3／41／2

1

25

11／2

40

2

50

3

80

4

100

6

150

8

200

10

250

3／4

20

1／2

15

A

H

D

C

17

165

100

160

30

190

127

180

38

216

132

230

58

283

197

400

76

305

213

400

114

403

246

750

144

419

293

1000

187

457

346

1500

12.5

152

91

140

10

140

89

140

257

306

364

300

300

400

283

283

337

71

71

86

150 300Gear Operator

H D C A

6

8

10

6

8

10


D

H

L

Features●Antistatic device●Blowout-proof stem●Fire test certification★ (API 607)●Double “D” stem head●High performance HYPATITE® PTFE ball seats●Actuator mounting pad to ISO 5211



Page 38 and 39 for Dimension of Actuator Mounting Pad

Regular port, Uni-body, End entry design

Valve operator1/2´́～10́´: Lever operation6´́～10´́ : Optional gear operation



Unit: mmDimensions of 150UTAM




Ball Bore

L

H

D

Valve Size

Unit: mmDimensions of 300UTAM

in.

mm

17

127

100

160

30

165

127

180

38

178

132

230

58

203

197

400

76

229

213

400

114

267

246

750

144

292

293

1000

187

330

346

1500

12.5

117

91

140

10

108

89

140

Ball Bore

L

H

D

Valve Sizein.

mm


(inch)

Class

Gear Operation

150UTAM

D

H

L

300UTAM

Unit: mm

●Conform to NACE MR0103 for hardness of body, body insert, stem and ball.

1／2

15

13

216

132

160

3／4

20

19

229

117

230

1

25

25

254

123

230

11／2

40

38

305

157

400

1／2

15

13

165

105

130

3／4

20

19

190

108

130

1

25

25

216

130

160

11／2

40

38

241

118

230

23



D

H

L

Features●Antistatic device●Blowout-proof stem●Fire test certification★ (API 607)●Double “D” stem head●Ball seats: Reinforced PTFE with MoS2 for Class 600

Nylon with MoS2 for Class 1500


Page 46 and 48 for Construction and Materials



Option★Flexible graphite packing and flexible




Option★Flexible graphite packing and flexible



Ball Bore

L

H

D

Valve Sizein.

mm

Ball Bore

L

H

D

Valve Sizein.

mm

600UTBM

D

H

L

1500UTBM

24


Class 150 Low Temperature Service Ball Valves

Features●Extended bonnet for assured stem seal and freezing prevention.●Bolted bonnet with body seal gasket.●Protection of stem alignment by means of two bearings built on top and bottom of stem extension.

1／2

15

14

108

228

120

130

3／4

20

19

117

231

120

130

1

25

24

127

268

143

160

11／4

32

32

140

272

143

160

11／2

40

38

165

300

165

230

2

50

50

178

309

165

230

21／2

65

64

190

373

194

400

3

80

76

203

383

194

400

4

100

100

229

458

207

750

D

H

H1

L

D

HH1

L

Valve operator1/2́ ´～4́´: Lever operation5́´～10́´: Gear operation

Unit: mmDimensions of 150UTDZXL

Unit: mmDimensions of G-150UTDZXL

Ball Bore

L

H

H1

D

Valve Sizein.

mm

5

125

123

356

482

207

310

6

150

151

394

572

236

360

8

200

202

457

685

268

500

10

250

253

533

724

268

500

Ball Bore

L

H

H1

D

Valve Sizein.

mm

150UTDZXL G-150UTDZXL

Lowest working temperature: －104℃

CF8＊

CF8＊

CF8

304

304/CF8

CF8

PTFE

HYPATITE® PTFE

Ceramic filled PTFE

B8/8

B8/8

Body

Body cap

Bonnet

Stem

Ball

Gland

Gland packing

Ball seat

Gasket

Bonnet bolt/nut

Cap bolt/nut

Parts Materials

Standard materials

Refer to Page 42 for the basic construction and materials.



＊CF8M are available

25


Class 300 Low Temperature Service Ball Valves

Features●Extended bonnet for assured stem seal and freezing prevention.●Bolted bonnet with body seal gasket.●Protection of stem alignment by means of two bearings built on top and bottom of stem extension.

Page 9 for Pressure-Temperature Ratings.

4

100

6

150

100

305

466

207

310

8

200

151

403

569

236

500

202

502

685

268

500

1／2

15

14

140

228

120

130

3／4

20

19

152

231

120

130

1

25

24

165

268

143

160

11／2

40

38

190

300

165

230

2

50

50

216

309

165

230

21／2

65

64

241

373

194

400

3

80

76

283

383

194

400

D

H

H1

L

D

HH1

L

Valve operator1/2́ ´～3´́ : Lever operation4´́～8´́ : Gear operation

Unit: mmDimensions of 300UTDZXL

Unit: mmDimensions of G-300UTDZXL

Bore Size

L

H

H1

D

Valve Sizein.

mm

Bore Size

L

H

H1

D

Valve Sizein.

mm

300UTDZXL G-300UTDZXL

Lowest working temperature: －104℃

CF8＊

CF8＊

CF8

304

304/CF8

CF8

PTFE

HYPATITE® PTFE

Ceramic filled PTFE

B8/8

B8/8

Body

Body cap

Bonnet

Stem

Ball

Gland

Gland packing

Ball seat

Gasket

Bonnet bolt/nut

Cap bolt/nut

Parts Materials

Standard materials

Refer to Page 42 for the basic construction and materials.


＊CF8M are available

※Valve size 11/4´́ and 5´́ are available

26


D

H

L1

L

L-port

Form 1

Form 1

Form 2

Form 2

Form 3

Form 4

A

C

B

A

C

B

A

C

B

A

C

B

A

C

B

A

C

B

T-port

19

140

70

132

160

25

160

80

135

160

38

180

90

146

400

51

200

100

155

400

64

242

121

185

460

76

262

131

198

460

102

342

171

267

1000

100

348

174

267

1000

125

407

203.5

289

1000

150

463

231.5

335

1500

20 25 40 50 65 80 100 125 150 200

3／4 1 11／2 2 21／2 3 4 5＊ 6＊ 8＊

1

25

25

165

82.5

124

160

11／2

40

38

210

105

115

230

2

50

51

220

110

123

230

21／2

65

65

250

125

155

400

3

80

76

262

131

165

400

4

100

102

342

171

200

460

6＊

150

127

437

218.5

220

460

Class 150 Stainless Steel 3-way Ball Valves

L-port

Form 1

Form 1

Form 2

Form 2

Form 3

A

C

B

A

C

B

A

C

B

A

C

B

A

C

B

T-port

D

H

L1

L

Features●Used for diverting or mixing process media●One 3-way valve can replace several other valves plus the

associated piping pieces●Antistatic device●Blowout-proof stem●Double “D” stem head●High performance HYPATITE® PTFE ball seats●Actuator mounting pad to KITZ standard

150UTB 2L/2T: Page 7 for Pressure-Temperature Ratings (See UTB Series)

150UTB 4LA/4TA: Page 9 for Pressure-Temperature Ratings

Full port, 2-seated or 4-seated, Split body, Side entry design

Valve operator1́ ´～6́ ´: Lever operation6́´: Optional gear operation

Note･JIS 10K type is also available.

Unit:mmDimensions of 150UTB2LM/2TM

Valve operator1/2́ ´～8´́ : Lever operation5́´～8́ ´: Optional gear operation

Note･JIS 10K type is also available.

Unit:mmDimensions of 150UTB4LAM/4TAM

Ball Bore

L

L1

H

D

Valve Sizein.

mm

1／2

15

15

120

65

128

160

Ball Bore

L

L1

H

D

Valve Sizein.

mm

150UTB2L (L-port, 2-seated)150UTB2T (T-port, 2-seated)

150UTB4LA (L-port, 4-seated)150UTB4TA (T-port, 4-seated)

＊150UTR 2LM/2TM

＊150UTR 4LAM/4TAM

3／4

20

20

120

135

130

1

25

25

130

150

160

11／2

40

40

165

150

230

2

50

50

180

157

230

21／2

65

65

190

188

400

3＊

80

65

200

188

400

4＊

100

80

230

213

400

6＊

150

125

270

258

460

3／4

20

20

117

105

130

1

25

25

127

124

160

11／2

40

40

165

115

230

2

50

50

178

120

230

21／2

65

65

190

155

400

3

80

80

203

165

400

4

100

100

229

200

460

5

125

125

356

220

460

6

150

150

394

295

1000

8

200

200

457

355

1500

27


1／2

15

15

108

102

130

Class 150 Stainless Steel Pocketless Ball Valves

D

H

L

Features●Unique filled cavity provides

excellent resistance to media buildup and/or stagnation between seats

●Antistatic device●Blowout-proof stem●Double “D” stem head●High performance HYPATITE®

PTFE ball seats●Actuator mounting pad to KITZ

standard

Full port, Split body, Side entry design Page 8 for Pressure-Temperature Ratings

Valve operator1/2́ ´～8´́ : Lever operation5́´～8́ ´: Optional gear operation

Ball Bore

L

H

D

Valve Size

Unit: mmDimensions

in.

mm

150UTBPM

1／2

15

15

110

131

130

Class 150 Stainless Steel Jacketed Ball Valves

D

H

L

Features●Fully jacketed to maintain media

temperature●Antistatic device●Double “D” stem head●High performance HYPATITE®


standard

Full port Page 8 for Pressure-Temperature Ratings

Valve operator1/2́ ´～6´́ : Lever operation6´́ : Optional gear operation

Note･Maximum allowable pressure is 1.37MPa(199psi) at 260 C゚ (500 F゚).･JIS 10K type is also available.

Ball Bore

L

H

D

Valve Size

Unit: mmDimensions

in.

mm

150UTBJM

＊150UTRJM

28


1

25

11／2

40

2

50

21／2

65

3

80

4

100

4012513423035155

5014214323041175

6516017740043185

8017118740045210

10017622246053280

12525524246053305

150292312100053330

For these sizes,please contactKITZ Corporation.

11／240

250

21／265

380

4100

5125

6150

8200

10250

3／4

20

20

152

106

130

25

165

129

160

40

191

118

230

50

216

124

230

65

240

157

400

80

250

166

400

100

280

204

460

1／2

15

15

140

104

130

10K Stainless Steel PFA Lined Ball Valves

D

H

L

Features●Highly corrosion-resistant PFA lining●Fine lining without a pinhole●Highly heat-resistant PFA●No additives or paints are included●Double “D” stem head●High performance HYPATITE®


standard

Full port, Split body, Side entry design Page 9 for Pressure-Temperature Ratings

Valve operator1/2́ ´～4́´: Lever operation

Note･Class 150 type is also available.

Ball Bore

L

H

D

Valve Size

Unit: mmDimensions

in.

mm

10UTBLN

1252510215016035135

Class 150 Stainless Steel Tank Ball Valves

D

H

D1

LL1

Features●Direct mounting to tank bottom●Churning media evenly●Antistatic device●Blowout-proof stem●Double “D” stem head●High performance HYPATITE®


s

steel ball valves - chalermchai marketing.co.,ltd · 2011. 6. 14. · design and inspection...

Documents