steel manufacturers association - mbma safetypp.pdf · key drivers to the sma safety committee...
TRANSCRIPT
Steel Manufacturers AssociationSteel Manufacturers Association
SMA Safety CommitteeyAugust 25, 2011
Ron Herring, Gerdau Midlothian
‐Composed of 35 North American electric arc furnace (“EAF”) steel producing Member Companies and 123 (“EAF”) steel producing Member Companies, and 123 Associate Member steel industry suppliers
‐Today, roughly two‐thirds of U.S. steel production comes Today, roughly two thirds of U.S. steel production comes from the scrap‐based EAF process, up from just 10% in the early 1970s
‐SMA Members account for approximately 80% of total domestic steel capacity
Key Drivers to the SMA Safety Committee Success
Safety Committee Meetings
Safety Statistics Benching
SMA Safety Website
/ Safety Statistics Benching
Marking
Fatality Prevention Initiative
Upstream/Downstream
Safety Awareness Fatality Prevention Initiative
Workplace Specific Safety
S e
Education & Outreach
First Hand Governmental Surveys
Sharing of SiteSite‐‐SpecificSpecific Best Practices
Compliance Awareness
SMA Safety Awards SMA Safety Awards
Key Drivers to the SMA Safety Committee Success
Need within ourour industry (2002)
◦◦ 14 fatalities…14 fatalities…
Strong initial leadership
Awards and Recognitions
OSHA involvement
More focus on industry specific Strong initial leadership
Board top down directives (at every meeting)(at every meeting)
Involved core industry members in
More focus on industry specific
process and procedures versus
governmental regulations Involved core industry members in
planning, soliciting, “boots on the ground”
Inclusive
Costs
‐ None additional to SMA
Modest hotels◦ Union and non‐union
◦ Companies and suppliers
◦ Safety professionals , safety committees, production managers,
d “h l ” l
‐ Modest hotels
‐ Cohesive and full schedule, all
work…and “hourly” employees
‐Meetings are held in the spring and fall each year
‐Attendance averages around 100 members, associate members, and
guests
‐Opportunity for sharing information on best practices and new
safety tools and protection
‐ Includes a presentation from an OSHA representative
‐OSHA Director Dr. Michaels addressed group in fall 2010 in
Arlington, VA
‐Usually include an optional plant tour
H ld M h i J k ill Fl idHeld on March 2011 in Jacksonville, Florida
141 Attendees (member company representatives and associate members)OSHA Update from Compliance Assistance Specialist OSHA Update from Compliance Assistance Specialist Optional plant tour of Gerdau Jacksonville MillAgenda Items Included
◦ Addressing Contractor/Trucking FatalitiesAddressing Contractor/Trucking Fatalities◦ Truck Driver Fall Protection◦ Mobile Equipment Lock Out and Maintenance◦ Pedestrian Pathways◦ Electrical Safety NFPA 70E Compliancey 7 p◦ Surviving an OSHA Inspection◦ Industrial Hygiene: Hex Chrome and Silica◦ Aging Workforce◦ First Aid◦ Emergency All Call Systems◦ Unsafe Act Audits◦ Duel‐Hearing Protection
SMA Members voluntarily report monthly data on number ofrecordable cases lost workday cases days lost and hoursrecordable cases, lost workday cases, days lost, and hoursworked.
Compiled year‐to‐date data is circulated to members as aspreadsheet eachmonth.p
16
18
20
6
8
10
12
14
Lost Time
Recordables
First Aids
0
2
4
Company A Company B Company C Company D
5
OSHA Recordable Frequency Rate Lost Time Frequency Rate
4
4.32
3.97 3.884.16
4
3.19
3
2
1.34
1 08
1 0.69
0.91.08
0.75
0
SMA’s safety documents do not provide an industrystandard, and do not set industry best practice.
These surveys and guides are intended as toolstools to assistThese surveys and guides are intended as toolstools to assistindividuals and companies in their efforts to prevent injuriesin the steel industry.
The purpose is not to take the place of an individual companypolicy or procedure, but rather to provide general proceduresand practices to assist member companies in developing safeprocedures as part of a comprehensive safety program.
Addresses Seven (7) critical areas: F i fi i iti i Addresses Seven (7) critical areas:
1. Confined Space;
2 Fall Protection;
Focusing on five priorities in addressing crane fatalities:
◦ operator visibility and 2. Fall Protection;
3. Lockout‐Tryout;
4 Mobile Equipment
attentiveness;
◦ maintenance;
◦ fall hazards; 4. Mobile Equipment
5. Material Handling
6 Rail, and
◦ fall hazards;
◦ charging the EAF/ladle handling; and
6. Rail, and
7. Cranes (Completed in 2011)◦ non‐routine procedures
Videos to be completed by the end of summer and introduced
Fatality Prevention Initiative
end of summer and introduced to the SMA in October 2011
Fatality Prevention Initiative
C i i l G id liCritical Guidelines
Regular questionnaires distributed by member request to address specific safety topics – anonymous results shared with all members
‐Topics have included: prescriptionprescription medication,medication,
aerialaerial lifts/permits,lifts/permits,
cellularcellular phonephone policies,policies,
heatheat illness/fruitillness/fruit program,program,
hothot worksworks permit/firepermit/fire prevention,prevention,
protectiveprotective eyewear/sealedeyewear/sealed eyewear,eyewear,
liftinglifting andand rigging/inspections,rigging/inspections,
motivationalmotivational safetysafety speakers,speakers,
safetysafety incentives,incentives,
hearinghearing protection/NRR/sizedprotection/NRR/sized earear plugsplugs
kevlarkevlar FRFR jackets,jackets,
measuringmeasuring annualannual safetysafety performanceperformance
Gerdau Midlothian Mill ‐Type InjuryBurns Laceration F/B Eye
36
38
28
22
18
16
2123
14
7
1211
2007 2008 2009 2010
Log‐In Page Main PageLog In Page Main Page
‐Notes and presentations from Committee meetings, 2002‐2011
Safety survey results grouped by date and topic‐Safety survey results, grouped by date and topic
‐Meeting notes grouped by date
‐Presentations from meetings grouped by date and topicPresentations from meetings grouped by date and topic
‐Catalogue of company incident and near miss reports
‐Fatality Prevention – document, audit tools, and videosy , ,
‐Radiation safety resources
SMA members have many contractors that work on our sites exposing the facility to higher exposure to risk. Improving the safety of the industry means that we must also improve contractor safety on our sites.
Many SMA members utilize contractor management systems that allow host Many SMA members utilize contractor management systems that allow host steel companies to only allow contractors on‐site who have demonstrated past positive safety performance, and have the safety programs in place to ensure safe job performancej p
Contractors are frequently invited to participate in and contribute to company safety committees
Spring 2011 meeting included a focus on Contractor Safety
77Midlothian Mill Contractor Type Injury CY 2010 ‐YTD 2011
66
Midlothian Mill Contractor Type Injury CY 2010 ‐YTD 2011
44
55
2010
33
2010
2011
11
22
00Strain/Sprain Bruise Burns Laceration F/B Eye Fracture Abrasion Heat Illness
SMA partnering with the Association for Iron & Steel Technology (AIST) to fund the Don B. Daily Memorial Fund to promote steel industry safety and health
Th SMA h ll N h A i i i The SMA challenges North American university teams (students and professors) to submit proposals for grant funding in the theme area of safety and health awareness g ywithin the steel manufacturing industry
Dual objectives: promote safe workplaces for the steel manufacturing industry, and increase the number of students studying health and safety awareness relative to the manufacturing environmentg
SMA Board of Directors recognizes outstanding safety performance through the annual Don gDaily SMA Achievement in Safety Award.
◦ 2011 recipient:
Chris Bullard and the Logistics Team ‐Gerdau Midlothian
SMA members have made great strides, and will be relentless in pursuit of continuous improvement until we achieve zero injuries in our of continuous improvement until we achieve zero injuries in our workplaces
SMA members have benefited tremendously from relationship with OSHA i l di k i i i d OSHA, including speakers at meetings, training resources, and cooperative programs
Private industry and government agencies can work together to y g g gimprove safety in the plant, community, county, state, and other divisions
The SMA through its members has been a driving force in improving The SMA, through its members, has been a driving force in improving safety performance
Thank YouThank You