steel sections

52
AS AGREED STEEL, METALS, ALUMINIUM, STAINLESS AND PRE-TREATMENT SERVICES

Upload: mcad12

Post on 05-Mar-2015

3.026 views

Category:

Documents


21 download

TRANSCRIPT

Page 1: Steel Sections

AS AGREED

STEEL, METALS, ALUMINIUM, STAINLESS AND PRE-TREATMENT SERVICES

Page 2: Steel Sections

www.norskstaal.no

EXTRACT FROM THE CATALOG IN NORWEGIAN

YOU WILL FIND OUR CATALOG ON:

Page 3: Steel Sections

LIST OF CONTENT

STEE

LSHE

ETS

TABL

ES

PLATES - HOT ROLLEDpage 3–111

2

3

4

5

6

7

BARS - HOT ROLLEDRound, half round, flat, wide flat, bulb flat, square, tees, angles and L-profiles page 11–19

Centerless rounds page 27

BEAMS AND CHANNELS - HOT ROLLEDUNP and UPE channels, INP, IPE, HEA and HEB beams page 19–23

Cold formed channels and angles page 27

STRUCTURAL HOLLOW SECTIONSCold- and hot formed hollow sections page 23–27

STEEL SHEETSHot dipped galvanized and electrolytic galvanized sheets page 28

Expanded metal and gratings page 29

ALUMINIUMAluminium plates, flat bars, angle bars, T-bars and steel explosive welded transition joints page 31–34

TABLESpage 35–40

ALUM

INIU

M

8 INFORMATION / OTHER SERVICESpage 41–44

INFO

RMAT

ION

/OT

HER

SERV

ICES

Page 4: Steel Sections

www.norskstaal.no2

CONTENTLIST

STEEL PLATES - HOT ROLLED ..................................3–9

Shipbuilding/structural NVA................................................3

Pressure vessel P265GH ..................................................5

Pressure vessel RAEX 386P ARCTIC ..............................5

Structural S355J2G3..........................................................5

Shipbuilding/structural NVE 36 ..........................................6

Structural S355G10 + N/M ................................................7

Structural S500G2 + M ......................................................7

Structural DOMEX S355MCD/E/S355ML ..........................7

Structural S420G2 + M ......................................................7

Structural WELDOX 500E..................................................8

Structural WELDOX 700E..................................................8

Abrasion resistant HARDOX 400 ......................................9

Abrasion resistant HARDOX 500 ......................................9

Shipbuilding/structural, Tearplates NVA ............................9

Structural, Tearplates S235JRG2 ....................................9

Structural, Checkerplates S235JRG2 ..............................9

STEEL BARS - HOT ROLLED ..................................10–16

Rounds/shafts NVA..........................................................10

Rounds/shafts S355J2G3+N ..........................................10

Rounds/shafts S355J2G3+N ..........................................11

Rounds/shafts S355JO ....................................................11

Half rounds NVA ..............................................................11

Flats NVA ........................................................................11

Flats S355J2G4 ..............................................................12

Wide flats NVA ................................................................13

Wide flats S355J2G4 ......................................................13

Bulb flats (HP) NVA..........................................................13

Bulb flats (HP) NVD 36 ....................................................14

Angles NVA......................................................................14

Angles NVA......................................................................15

Angles S355J2G4 ............................................................15

Angles S355J2G4 ............................................................16

L-profiles NVD 36 ............................................................16

Squares S235JRG2 ........................................................16

Tees S235JRG2 ..............................................................16

STEEL BEAMS AND CHANNELS - HOT ROLLED 16–20

Steel channels UNP S355G11 + N/M..............................16

Steel channels UPE S355N ............................................16

Steel sections INP Fritenar 355 ......................................17

Steel sections IPE S355J2G4..........................................17

Steel sections IPE/S355G11+N/M ..................................17

Steel beams HEA S355J2G4 ..........................................18

Steel beams HEA S355G11+N/M....................................18

Steel beams HEB S355J2G4 ..........................................19

Steel beams HEB S355G11 + N/M..................................19

Steel beams HEM S355G11 + N/M ................................20

STEEL, STRUCTURAL HOLLOW SECTIONS ........20–22

Cold formed Hybox 355/ S355J2H ..................................20

Cold formed Hybox 355/ S355J2H ..................................21

Hot formed Celsius S355NH............................................21

Hot formed Celsius S355NH............................................22

STEEL SHEETS ..............................................................23

Hot dipped galvanized ....................................................23

Elektrolytic galvanized ....................................................23

ALUMINIUM ..............................................................24–26

Aluminium treadplates ....................................................24

Aluminium ship-plates......................................................24

Aluminium flat bars ..........................................................24

Aluminium T-profiles ........................................................25

Aluminium angles ............................................................25

Aluminium angles ............................................................26

Aluminium-steel explosive welded transition joints ..........26

TABLES ....................................................................27–33

European standard (EN) ..................................................27

Compares new European standards and earlier national

standards ........................................................................28

Quality view/Summary ....................................................30

Information – Pre-treatment services ..............................32

Product Page Product Page

2 2

Page 5: Steel Sections

www.norskstaal.no 33

STEEL

3

ARTICLE GROUP 144

Article no. Dimension Kg/plate

144006 3,00 X 1500 X 5000 mm 180,00 144007 3,00 X 1800 X 4000 mm 173,00 144008 3,00 X 1800 X 5000 mm 216,00144009 3,00 X 1800 X 6000 mm 259,00144010 3,00 X 2000 X 6000 mm 288,00

144030 4,00 X 1500 X 5000 mm 240,00 144032 4,00 X 1500 X 6000 mm 288,00144035 4,00 X 1800 X 5000 mm 288,00 144040 4,00 X 1800 X 6000 mm 346,00 144041 4,00 X 2000 X 6000 mm 384,00 144042 4,00 X 2500 X 5000 mm 400,00

144065 5,00 X 1500 X 6000 mm 360,00 144070 5,00 X 1800 X 5000 mm 360,00 144075 5,00 X 1800 X 6000 mm 432,00 144085 5,00 X 2000 X 5000 mm 400,00 144090 5,00 X 2000 X 6000 mm 480,00 144093 5,00 X 2500 X 6000 mm 600,00 144094 5,00 X 2500 X 8000 mm 800,00

ARTICLE GROUP 134

Article no. Dimension Kg/plate

134020 2 X 1000X2000 mm 32,00134025 2 X 1250X2500 mm 50,00

134028 2,5X1000X2000 mm 40,00

134031 3 X 1000X2000 mm 48,00134035 3 X 1250X2500 mm 75,00134038 3 X 1500X3000 mm 108,00

134041 4 X 1000X2000 mm 64,00134045 4 X 1250X2500 mm 100,00134048 4 X 1500X3000 mm 144,00

134051 5 X 1000X2000 mm 80,00134052 5 X 1000X2000 mm 80,00134055 5 X 1250X2500 mm 125,00134058 5 X 1500X3000 mm 180,00

134061 6 X 1000X2000 mm 96,00134065 6 X 1250X2500 mm 150,00134068 6 X 1500X3000 mm 216,00

134075 8 X 1250X2500 mm 200,00134078 8 X 1500X3000 mm 288,00

134085 10X 1250X2500 mm 250,00134088 10X 1500X3000 mm 360,00

134098 12X 1500X3000 mm 432,00

ARTICLE GROUP 135

Article no. Dimension Kg/plate

135008 3,00 X 1000 X 2000 mm 48,00 135015 3,00 X 1250 X 2500 mm 75,00 135020 3,00 X 1250 X 3600 mm 108,00 135021 3,00 X 1500 X 3000 mm 108,00 135022 3,00 X 1500 X 3600 mm 130,00

135036 4,00 X 1000 X 2000 mm 64,00 135043 4,00 X 1250 X 2500 mm 100,00135052 4,00 X 1500 X 3000 mm 144,00

135064 5,00 X 1000 X 2000 mm 80,00135071 5,00 X 1250 X 2500 mm 125,00135074 5,00 X 1500 X 3000 mm 180,00135079 5,00 X 1500 X 3610 mm 216,60135084 5,00 X 1500 X 5010 mm 300,60

135120 6,00 X 1000 X 2000 mm 96,00135127 6,00 X 1250 X 2500 mm 150,00135140 6,00 X 1500 X 3000 mm 216,00

135185 8,00 X 1000 X 2000 mm 128,00135190 8,00 X 1250 X 2500 mm 200,00135200 8,00 X 1500 X 3000 mm 288,00

135220 10,00 X 1000 X 2000 mm 160,00135225 10,00 X 1250 X 2500 mm 250,00135300 10,00 X 1500 X 3000 mm 360,00

135315 12,00 X 1000 X 2000 mm 192,00135320 12,00 X 1250 X 2500 mm 300,00135325 12,00 X 1500 X 3000 mm 432,00

135328 15,00 X 1000 X 2000 mm 240,00135330 15,00 X 1250 X 2500 mm 375,00135340 15,00 X 1500 X 3000 mm 540,00

Steel plates S235JRG2/Domex 240YPacc.to EN 10 025(NORSOK M.120 rev. 4-MDSY01 Rev. 4)Uniqe properties regarding Cold forming,tight bend radius and suitability for lazer cutting.Tolerances and flatness acc. to EN 10 051.Inspection certificate acc. to EN 10 204-3.1.BMarking: Read corner. Quality dot matrixmarked along one side

Steel plates S235JRG2/Domex 240YPacc.to EN 10 025. Picled and light oiled.(NORSOK M.120 rev. 4-MDSY01 Rev. 4)Uniqe properties regarding Cold forming,tight bend radius and suitability for lazer cutting.Tolerances and flatness acc. to EN 10 051.Inspection certificate acc. to EN 10 204-3.1.BMarking: Read corner. Quality dot matrix marked along one side.Delivered as singled sheets or in ab. 2000 kgs envelopes.Marking: Quality dot matrix marked along one side.

Steel plates NVARules for classifications of ships, newbuilding, 1. January 2003.Thickness tolerances Class B acc. to EN 10 029.Remaining tolerances acc. to DNV rules.Inspection certificate acc to EN 10 204-3.1.C-DNV.Chargenumber stamped in the material.White ring around chargenumber.MARKING: Yellow corner.

Page 6: Steel Sections

www.norskstaal.no44 4

STEEL

Article no. Dimension Kg/plate

144120 6,00 X 1500 X 5000 mm 360,00144124 6,00 X 1500 X 6000 mm 432,00144140 6,00 X 1800 X 6000 mm 518,00144141 6,00 X 2000 X 5000 mm 480,00144143 6,00 X 2000 X 6000 mm 576,00144144 6,00 X 2000 X 8000 mm 768,00144147 6,00 X 2500 X 6000 mm 720,00144149 6,00 X 2500 X 8000 mm 960,00

144157 6,50 X 2500 X 8000 mm 1040,00

144164 7,00 X 2000 X 6000 mm 672,00144166 7,00 X 2500 X 6000 mm 840,00144168 7,00 X 2500 X 8000 mm 1120,00 144169 7,00 X 2500 X 12000 mm 1680,00

144183 7,50 X 2500 X 8000 mm 1200,00

144205 8,00 X 1500 X 6000 mm 576,00 144230 8,00 X 2000 X 6000 mm 768,00 144240 8,00 X 2000 X 8000 mm 1024,00 144260 8,00 X 2500 X 6000 mm 960,00144264 8,00 X 2500 X 8000 mm 1280,00 144270 8,00 X 2500 X 12000 mm 1920,00

144277 8,50 X 2500 X 8000 mm 1360,00

144295 9,00 X 2000 X 6000 mm 864,00144296 9,00 X 2000 X 8000 mm 1152,00144298 9,00 X 2500 X 6000 mm 1080,00144305 9,00 X 2500 X 8000 mm 1440,00144308 9,00 X 2500 X 12000 mm 2160,00

144327 9,50 X 2500 X 8000 mm 1520,00

144365 10,00 X 1500 X 6000 mm 720,00 144377 10,00 X 2000 X 6000 mm 960,00 144380 10,00 X 2000 X 8000 mm 1280,00 144383 10,00 X 2500 X 6000 mm 1200,00 144386 10,00 X 2500 X 8000 mm 1600,00144390 10,00 X 2500 X 12000 mm 2400,00

144401 11,00 X 2000 X 6000 mm 1056,00144402 11,00 X 2000 X 8000 mm 1408,00144403 11,00 X 2500 X 6000 mm 1320,00144404 11,00 X 2500 X 8000 mm 1760,00144408 11,00 X 2500 X 12000 mm 2640,00

144413 11,50 X 2500 X 8000 mm 1840,00

144425 12,00 X 1500 X 6000 mm 864,00144431 12,00 X 2000 X 6000 mm 1152,00144434 12,00 X 2000 X 8000 mm 1536,00144437 12,00 X 2500 X 6000 mm 1440,00144440 12,00 X 2500 X 8000 mm 1920,00144444 12,00 X 2500 X 12000 mm 2880,00

144453 12,50 X 2500 X 8000 mm 2000,00

144456 13,00 X 2000 X 6000 mm 1248,00144457 13,00 X 2000 X 8000 mm 1664,00144459 13,00 X 2500 X 8000 mm 2080,00144461 13,00 X 2500 X 12000 mm 3120,00144468 14,00 X 2000 X 6000 mm 1344,00144469 14,00 X 2000 X 8000 mm 1792,00144471 14,00 X 2500 X 8000 mm 2240,00

144473 14,00 X 2500 X 12000 mm 3360,00

144486 15,00 X 1500 X 3000 mm 540,00144492 15,00 X 1500 X 6000 mm 1080,00144498 15,00 X 2000 X 6000 mm 1440,00144499 15,00 X 2000 X 8000 mm 1920,00144501 15,00 X 2500 X 8000 mm 2400,00144506 15,00 X 2500 X 12000 mm 3600,00

144520 16,00 X 1250 X 2500 mm 400,00144529 16,00 X 2000 X 6000 mm 1536,00144535 16,00 X 2500 X 8000 mm 2560,00144540 16,00 X 2500 X 12000 mm 3840,00144547 18,00 X 2000 X 6000 mm 1728,00144550 18,00 X 2500 X 8000 mm 2880,00144552 18,00 X 2500 X 12000 mm 4320,00

144562 20,00 X 1000 X 2000 mm 320,00144565 20,00 X 1250 X 2500 mm 500,00144568 20,00 X 1500 X 3000 mm 720,00144571 20,00 X 1500 X 6000 mm 1440,00144580 20,00 X 2000 X 6000 mm 1920,00144583 20,00 X 2000 X 8000 mm 2560,00144586 20,00 X 2500 X 6000 mm 2400,00144589 20,00 X 2500 X 8000 mm 3200,00144591 20,00 X 2500 X 12000 mm 4800,00144601 22,00 X 2500 X 8000 mm 3520,00

144604 25,00 X 1000 X 2000 mm 400,00144607 25,00 X 1250 X 2500 mm 625,00144613 25,00 X 1500 X 6000 mm 1800,00144616 25,00 X 2000 X 6000 mm 2400,00144619 25,00 X 2000 X 8000 mm 3200,00144622 25,00 X 2500 X 8000 mm 4000,00144626 25,00 X 2500 X 12000 mm 6000,00

144631 30,00 X 1250 X 2500 mm 750,00144637 30,00 X 1500 X 6000 mm 2160,00144640 30,00 X 2000 X 6000 mm 2880,00144649 30,00 X 2500 X 8000 mm 4800,00

144673 35,00 X 2000 X 6000 mm 3360,00144679 35,00 X 2500 X 8000 mm 5600,00

144682 40,00 X 1000 X 2000 mm 640,00144685 40,00 X 1250 X 2500 mm 1000,00144688 40,00 X 1500 X 3000 mm 1440,00144694 40,00 X 2000 X 6000 mm 3840,00144703 40,00 X 2500 X 8000 mm 6400,00

144712 45,00 X 2000 X 6000 mm 4320,00144713 45,00 X 2500 X 8000 mm 7200,00

144715 50,00 X 1000 X 2000 mm 800,00144718 50,00 X 1250 X 2500 mm 1250,00144730 50,00 X 2000 X 6000 mm 4800,00144736 50,00 X 2500 X 8000 mm 8000,00

144748 60,00 X 2000 X 6000 mm 5760,00

144761 65,00 X 2000 X 6000 mm 6240,00

144773 70,00 X 2000 X 6000 mm 6720,00

144787 80,00 X 1500 X 3000 mm 2880,00144792 80,00 X 2000 X 6000 mm 7680,00

Article no. Dimension Kg/plate

Page 7: Steel Sections

www.norskstaal.no 55 5

STEEL

Steel plates for pressure purposesRAEX 386P ARCTICacc. to NGS 1208.Impact tested at -60 degr. C.Tolerances acc. to EN 10 029, Class C.Inspection certificate acc. to EN 10 204-3.1.C-DNV.Chargenumber stamped in the material.MARKING: White corner + green stroke.

Steel plates for pressure purposesP265GHacc. to EN 10 028-2/ASME 516 GR. 60/ ASME SEC. 2 part A. ADWI, TRB 100.Proof stress tested Rp 0,2 acc. to EN 10 002 at 300 degr. CTolerances and flatness acc. to EN 10 029, Class C.Inspection certificate acc. to EN 10 204 -3.1.C-DNV.Chargenumber stamped in the material, and white ringaround.MARKING: White corner

ARTICLE GROUP 140

Article no. Dimension Kg/plate

140004 6,00 X 2000 X 6000 mm 576,00140009 8,00 X 2000 X 6000 mm 768,00

140014 10,00 X 2000 X 6000 mm 960,00140016 10,00 X 2000 X 8000 mm 1280,00140018 10,00 X 2000 X 12000 mm 1920,00

140022 12,00 X 2000 X 8000 mm 1536,00140025 12,00 X 2500 X 10000 mm 2400,00

140029 25,00 X 2000 X 5000 mm 2000,00

140032 28,00 X 2500 X 4000 mm 2240,00

140035 35,00 X 2500 X 4000 mm 2800,00

140045 45,00 X 2500 X 4000 mm 3600,00

ARTICLE GROUP 148

Article no. Dimension Kg/plate

148040 8,00 X 2500 X 8000 mm 1312,00

148060 10,00 X 2500 X 8000 mm 1640,00

148080 12,00 X 2500 X 8000 mm 1968,00

148100 15,00 X 2500 X 8000 mm 2460,00

148120 20,00 X 2500 X 8000 mm 3280,00

Steel plates S355J2G3acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y05 Rev. 2with control)Carbonequivalent (Ceq) to be stated in the certificate.Tolerances and flatness acc. to EN 10 029 Class A.Inspection certificate acc. to EN 10 204-3.1.B forthickness under 50 mm. Inspection certificate acc. to EN 10 204-3.1.C-DNV for 50 mm and thicker.Chargenumber stamped in the material and white ring around. MARKING: Aluminium corner.

ARTICLE GROUP 150

Article no. Dimension Kg/plate

150015 3,00 X 1250 X 2500 mm 75,00150020 4,00 X 1250 X 2500 mm 100,00150030 5,00 X 1250 X 2500 mm 125,00150040 5,00 X 2000 X 6000 mm 480,00150045 6,00 X 1000 X 2000 mm 96,00150050 6,00 X 1250 X 2500 mm 150,00150055 6,00 X 1500 X 3000 mm 216,00150065 6,00 X 2000 X 6000 mm 576,00

150080 8,00 X 1000 X 2000 mm 128,00150085 8,00 X 1250 X 2500 mm 200,00150090 8,00 X 1500 X 3000 mm 288,00150100 8,00 X 2000 X 6000 mm 768,00150105 8,00 X 2500 X 6000 mm 960,00150110 8,00 X 2500 X 8000 mm 1280,00

150125 10,00 X 1000 X 2000 mm 160,00150130 10,00 X 1250 X 2500 mm 250,00150150 10,00 X 2000 X 6000 mm 960,00150155 10,00 X 2500 X 6000 mm 1200,00150160 10,00 X 2500 X 8000 mm 1600,00

150165 12,00 X 1000 X 2000 mm 192,00150170 12,00 X 1250 X 2500 mm 300,00150190 12,00 X 2000 X 6000 mm 1152,00150195 12,00 X 2500 X 6000 mm 1440,00150200 12,00 X 2500 X 8000 mm 1920,00

150235 15,00 X 1250 X 2500 mm 375,00150240 15,00 X 1500 X 3000 mm 540,00150250 15,00 X 2000 X 6000 mm 1440,00150255 15,00 X 2500 X 6000 mm 1800,00150260 15,00 X 2500 X 8000 mm 2400,00

150270 16,00 X 1250 X 2500 mm 400,00150275 16,00 X 1500 X 3000 mm 576,00150285 16,00 X 2500 X 8000 mm 2560,00

150320 20,00 X 1000 X 2000 mm 320,00150325 20,00 X 1250 X 2500 mm 500,00150330 20,00 X 1500 X 3000 mm 720,00150340 20,00 X 2000 X 6000 mm 1920,00150345 20,00 X 2500 X 6000 mm 2400,00150350 20,00 X 2500 X 8000 mm 3200,00

150405 25,00 X 1250 X 2500 mm 625,00150410 25,00 X 1500 X 3000 mm 900,00150420 25,00 X 2000 X 6000 mm 2400,00150430 25,00 X 2500 X 8000 mm 4000,00

150470 30,00 X 1250 X 2500 mm 750,00150475 30,00 X 1500 X 3000 mm 1080,00150485 30,00 X 2000 X 6000 mm 2880,00150490 30,00 X 2500 X 8000 mm 4800,00150512 35,00 X 1500 X 3000 mm 1260,00150520 35,00 X 2000 X 6000 mm 3360,00

Page 8: Steel Sections

www.norskstaal.no6 66

STEEL

150550 40,00 X 1250 X 2500 mm 1000,00150555 40,00 X 1500 X 3000 mm 1440,00150565 40,00 X 2000 X 6000 mm 3840,00150570 40,00 X 2500 X 8000 mm 6400,00

150575 45,00 X 1500 X 3000 mm 1620,00

150600 50,00 X 1500 X 3000 mm 1800,00150617 50,00 X 2500 X 5000 mm 5000,00150620 50,00 X 2500 X 8000 mm 8000,00

150650 60,00 X 1500 X 3000 mm 2160,00150655 60,00 X 2000 X 6000 mm 5760,00

150660 65,00 X 1500 X 3000 mm 2340,00

150690 70,00 X 1500 X 3000 mm 2520,00150700 70,00 X 2000 X 6000 mm 6720,00

150730 80,00 X 1500 X 3000 mm 2880,00150735 80,00 X 2000 X 6000 mm 7680,00

150740 90,00 X 1250 X 2500 mm 2250,00

150745 90,00 X 2000 X 6000 mm 8640,00

150750 100,00 X 1500 X 3000 mm 3600,00

150754 100,00 X 2000 X 5000 mm 9600,00

150756 110,00 X 2000 X 2500 mm 8800,00

150762 115,00 X 2000 X 5000 mm 9200,00

150766 120,00 X 2000 X 5000 mm 9600,00

150774 125 00 X 2000 X 5000 mm 10000,00

150805 130,00 X 1250 X 2500 mm 3250,00150807 130,00 X 2500 X 3750 mm 9750,00150810 130,00 X 2000 X 4000 mm 8320,00

150820 140,00 X 1250 X 2500 mm 3500,00150822 140,00 X 2500 X 3750 mm 10500,00150824 140,00 X 2000 X 4000 mm 8960,00

150833 150,00 X 1250 X 2500 mm 3750,00150833 150,00 X 1500 X 3000 mm 5400,00

150836 150,00 X 2000 X 4000 mm 9600,00

150850 200,00 X 1250 X 2500 mm 5000,00

Article no. Dimension Kg/plate

ARTICLE GROUP 146

Article no. Dimension Kg/plate

146002 6,00 X 2000 X 6000 mm 576,00146003 6,00 X 2500 X 8000 mm 960,00

Article no. Dimension Kg/plate

146005 7,00 X 2500 X 8000 mm 1120,00

146006 8,00 X 2000 X 6000 mm 768,00146007 8,00 X 2500 X 8000 mm 1280,00146009 8,00 X 2500 X 12000 mm 1920,00

146008 10,00 X 2000 X 6000 mm 960,00146010 10,00 X 2500 X 8000 mm 1600,00146012 10,00 X 2500 X 12000 mm 2400,00146013 10,00 X 3000 X 12000 mm 2880,00

146015 12,00 X 2000 X 6000 mm 1152,00146022 12,00 X 2500 X 8000 mm 1920,00146023 12,00 X 2500 X 12000 mm 2880,00146024 12,00 X 3000 X 12000 mm 3456,00

146027 15,00 X 2500 X 12000 mm 3600,00146028 15,00 X 3000 X 12000 mm 4320,00146029 15,00 X 2000 X 6000 mm 1440,00146030 15,00 X 2500 X 8000 mm 2400,00

146031 16,00 X 2000 X 6000 mm 1536,00146032 16,00 X 2500 X 8000 mm 2560,00

146035 18,00 X 2500 X 8000 mm 2880,00

146045 20,00 X 2000 X 6000 mm 1920,00146055 20,00 X 2500 X 8000 mm 3200,00146057 20,00 X 2500 X 12000 mm 4800,00146058 20,00 X 3000 X 12000 mm 5760,00

146061 22,00 X 2500 X 8000 mm 3520,00

146065 25,00 X 2000 X 6000 mm 2400,00146075 25,00 X 2500 X 8000 mm 4000,00146076 25,00 X 2500 X 10000 mm 5000,00146077 25,00 X 2500 X 12000 mm 6000,00146078 25,00 X 3000 X 12000 mm 7200,00

146082 30,00 X 1500 X 6000 mm 2160,00146084 30,00 X 2000 X 6000 mm 2880,00146085 30,00 X 2500 X 8000 mm 4800,00146086 30,00 X 3000 X 12000 mm 8640,00

146090 35,00 X 2000 X 6000 mm 3360,00146091 35,00 X 2500 X 8000 mm 5600,00

146095 40,00 X 2000 X 6000 mm 3840,00146105 40,00 X 2500 X 8000 mm 6400,00

146106 45,00 X 2500 X 8000 mm 7200,00146108 45,00 X 2000 X 6000 mm 4320,00

146115 50,00 X 2000 X 6000 mm 4800,00146121 50,00 X 2500 X 8000 mm 8000,00

146130 60,00 X 2000 X 6000 mm 5760,00

146140 65,00 X 2000 X 6000 mm 6240,00

146148 70,00 X 2000 X 6000 mm 6720,00

146156 75,00 X 2000 X 6000 mm 7200,00

146162 80,00 X 2000 X 6000 mm 7680,00

146170 90,00 X 2000 X 6000 mm 8640,00

146190 100,00 X 2000 X 6000 mm 9600,00

Steel plates NVE 36acc.to DNV offshore codes,Classification of Offshore Units Jan. 2001and Rules for Classification of ships Jan. 2003Modified: C max 0,16% and CEQ max 0,41%.Impact tested at -40 gr. C min. 50 Joule/longtested.Thickness tolerances Class B acc. to EN 10 029.Remaining toleranses acc. to DNV-rules.Inspection certificate acc. to EN 10 204-3.1.C-DNV.Marking: Brown corner.

Page 9: Steel Sections

www.norskstaal.no 77 7

STEEL

ARTICLE GROUP 189

Article no. Dimension Kg/plate

189007 8,00 X 2500 X 8000 mm 1280,00189011 10,00 X 2500 X 12000 mm 2400,00189014 12,00 X 2500 X 12000 mm 2880,00189017 15,00 X 2500 X 12000 mm 3600,00189018 16,00 X 2500 X 12000 mm 3840,00189027 20,00 X 2500 X 12000 mm 4800,00189037 25,00 X 2500 X 12000 mm 6000,00189047 30,00 X 2500 X 12000 mm 7200,00189050 35,00 X 2500 X 12000 mm 8400,00189057 40,00 X 2500 X 12000 mm 9600,00189066 50,00 X 2500 X 8000 mm 8000,00189075 60,00 X 2000 X 6000 mm 5760,00189080 70,00 X 2000 X 6000 mm 6720,00189090 80,00 X 2000 X 6000 mm 7680,00189105 100,00 X 1500 X 3000 mm 3600,00189110 100,00 X 2000 X 4000 mm 6400,00189120 110,00 X 2000 X 4000 mm 7040,00189130 120,00 X 2000 X 4000 mm 7680,00189131 120 00 X 2000 X 5000 mm 9600,00189135 130,00 X 1500 X 3000 mm 4680,00189140 130,00 X 2000 X 4000 mm 8320,00189150 140,00 X 2000 X 4000 mm 8960,00189160 150,00 X 2000 X 4000 mm 9600,00189200 200,00 X 1000 X 2000 mm 3200,00

Steel plates S355G10 + N/Macc. to NORSOK M-120 Rev. 4-MDS Y20 Rev.4 and acc. to EN 10 225.Z 35 for thicknesses ≥ 25 mm.Tolerances and flatness acc. to EN 10 029.Inspection certificate acc. to EN 10 204-3.1.B.Chargenumber stamped in both ends.MARKING: Aluminium corner + red stroke.

ARTICLE GROUP 151

Article no. Dimension Kg/plate

151015 3,00 X 1250 X 2500 mm 75,00151017 3,00 X 1500 X 3000 mm 108,00

151020 4,00 X 1250 X 2500 mm 100,00151023 4,00 X 1500 X 3000 mm 144,00

151025 5,00 X 1000 X 2000 mm 80,00151030 5,00 X 1250 X 2500 mm 125,00151033 5,00 X 1500 X 3000 mm 180,00

151045 6,00 X 1000 X 2000 mm 96,00151050 6,00 X 1250 X 2500 mm 150,00151055 6,00 X 1500 X 3000 mm 216,00

151080 8,00 X 1000 X 2000 mm 128,00151085 8,00 X 1250 X 2500 mm 200,00151090 8,00 X 1500 X 3000 mm 288,00

151125 10,00 X 1000 X 2000 mm 160,00151130 10,00 X 1250 X 2500 mm 250,00151135 10,00 X 1500 X 3000 mm 360,00

151165 12,00 X 1000 X 2000 mm 192,00151170 12,00 X 1250 X 2500 mm 300,00151175 12,00 X 1500 X 3000 mm 432,00151185 15,00 X 1500 X 3000 mm* 540,00

* S355MCB - without impact test

Steel plates DOMEX S355MCD/EHigh yield strength steel acc. to EN 10 149-2Uniqe properties regarding Cold forming,tight bend radius and suitability for lazer cutting.Re min 355 N/mm2 Impact tested at -20 gr. C or -40 gr. CTolerances and flatness acc. to EN 10 051.Inspection certificate acc. toEN 10 204-3.1.B. Deliverted as singled sheets or in ab.2000 kgs envelopes.Marking: Quality dot matrix marked along one side and/orblue corner + black stroke.

ARTICLE GROUP 128

Article no. Dimension Kg/plate

128020 2,00X1000X2000 mm 32,00128022 2,00X1250X2500 mm 50,00128025 2,50X1250X2500 mm 62,50128030 3,00X1250X2500 mm 75,00128040 4,00X1000X2000 mm 64,00128045 4,00X1250X2500 mm 100,00128048 5,00X1000X2000 mm 80,00

Steel plates DOMEX S355MCD/EPicled and light oiled.High yield strength steel acc. to EN 10 149-2Uniqe properties regarding Cold forming, tight bend radius and suitability for lazer cutting.Re min 355 N/mm2 Impact tested at -20 gr. C or -40 gr. CTolerances and flatness acc. to EN 10 051.Inspection certificate acc. toEN 10 204-3.1.B. Deliverted as singled sheets or in ab.2000 kgs envelopes.Marking: Quality dot matrix marked along one side.

Article no. Dimension Kg/plate

128058 6,00X1000X2000 mm 96,00128062 6,00X1500X3000 mm 216,00

128078 8,00X1000X2000 mm 128,00128082 8,00X1500X3000 mm 88,00

128092 10,00X1500X3000 mm 360,00128102 12,00X1500X3000 mm 432,00

DOMEX, kaldformingsstål leveres med kaldformingsgaranti og med enoverflate egnet for moderne skjæreteknikk (laser, plasma, vannjet o.l).

Page 10: Steel Sections

www.norskstaal.no8

ARTICLE GROUP 164

Article no. Dimension Kg/plate

164022 3,00 X 1250 X 2500 mm 75,00164024 3,00 X 1500 X 3000 mm 108,00164038 4,00 X 1500 X 3000 mm 144,00164057 5,00 X 1500 X 3000 mm 180,00164064 5,00 X 1500 X 5000 mm 300,00164070 6,00 X 1500 X 5000 mm 360,00164080 8,00 X 1500 X 3000 mm 288,00164085 10,00 X 1500 X 3000 mm 360,00

8

STEEL

ARTICLE GROUP 191

Article no. Dimension Kg/plate

191085 8,00 X 2500 X 10000 mm 1600,00

191100 10,00 X 2500 X 12000 mm 2400,00

191110 12,00 X 2500 X 12000 mm 2880,00191120 12,00 X 3000 X 12000 mm 3456,00

191150 15,00 X 2500 X 12000 mm 3600,00191155 15,00 X 3000 X 12000 mm 4320,00

Steel plates S420G2 + MNORSOK M-120 Rev.4, MDS Y30 Rev.4and acc. to EN 10 225Z 35 for thicknesses ≥ 25 mm.Tolerances and flatness acc. to EN 10 029.Inspection certificate acc. to EN 10 204-3.1.B.Chargenumber stamped in both ends.MARKING: Aluminiumcorner + yellow stroke.

Steel plates DOMEX S700MCDHigh yield strength steel acc. to EN 10 149-2Uniqe properties regarding Cold forming,tight bend radius and suitability for lazer cutting.Re min 700 N/mm2 Impact tested at -20 gr. CTolerances and flatness acc. to EN 10 051.Inspection certificate acc. toEN 10 204-3.1.B. Deliverted as singled sheets or in ab.2000 kgs envelopes.Marking: Quality dot matrix marked along one side and/orblue corner + white stroke.

Steel plates DOMEX 350Wacc. to EN 10 155Structural steel with improved atmospheric corrosion resistance.Tolerances and flatness acc. to EN 10 051.Inspection certificate acc. to EN 10 204-3.1.B.Marking: black corner

* Pickled and light oiled

Steel plates DOMEX S500MCDPicled and light oiled.High yield strength steel acc. to EN 10 149-2Uniqe properties regarding Cold forming,tight bend radius and suitability for lazer cutting.Re min 500 N/mm2 Impact tested at -20 gr. CTolerances and flatness acc. to EN 10 051.Inspection certificate acc. toEN 10 204-3.1.B. Deliverted as singled sheets or in ab.2000 kgs envelopes.Marking: Quality dot matrix marked along one side and/orblue corner + red stroke.

Steel plates DOMEX S650MCDHigh yield strength steel acc. to EN 10 149-2Uniqe properties regarding Cold forming,tight bend radius and suitability for lazer cutting.Re min 650 N/mm2 Impact tested at -20 gr. CTolerances and flatness acc. to EN 10 051.Inspection certificate acc. toEN 10 204-3.1.B. Deliverted as singled sheets or in ab.2000 kgs envelopes.Marking: Quality dot matrix marked along one side and/orblue corner

* Untreated

ARTICLE GROUP 173

Article no. Dimension Kg/plate

173012 3X1250X2500 mm 75,00

173022 4X1500X3000 mm 144,00

*173035 5X1500X3000 mm 180,00

173052 6X1500X3000 mm 216,00

173062 8X1500X3000 mm 288,00

173102 10X1500X3000 mm 360,00

ARTICLE GROUP 174

Article no. Dimension Kg/plate

174025 3,00 X 1250 X 2500 mm 75,00

174040 4,00 X 1250 X 2500 mm 100,00174045 4,00 X 1500 X 5000 mm 240,00

174050 5,00 X 1250 X 2500 mm 125,00174052 5,00 X 1500 X 5000 mm 300,00

174054 6,00 X 1250 X 2500 mm 150,00174055 6,00 X 1500 X 3000 mm 216,00174056 6,00 X 1500 X 5000 mm 360,00

174057 8,00 X 1250 X 2500 mm 200,00174060 8,00 X 1500 X 5000 mm 480,00

ARTICLE GROUP 175

Article no. Dimension Kg/plate

175018 *4,00 X 1000 X 2000 mm 64,00175040 *6,00 X 1000 X 2000 mm 96,00175050 6,00 X 1500 X 5000 mm 360,00

Page 11: Steel Sections

www.norskstaal.no 99 99

STEEL

191160 16,00 X 2500 X 12000 mm 3840,00

191200 20,00 X 2500 X 12000 mm 4800,00191205 20,00 X 3000 X 12000 mm 5760,00

191250 25,00 X 2500 X 12000 mm 6000,00191255 25,00 X 3000 X 12000 mm 7200,00

191300 30,00 X 2500 X 12000 mm 7200,00191305 30,00 X 3000 X 12000 mm 8640,00

191350 35,00 X 2500 X 12000 mm 8400,00

191405 40,00 X 2500 X 12000 mm 9600,00

191450 45,00 X 2500 X 8000 mm 7200,00

191500 50,00 X 2500 X 8000 mm 8000,00

191550 55,00 X 2500 X 8000 mm 8800,00

191600 60,00 X 2500 X 6000 mm 7200,00

191700 70,00 X 2500 X 6000 mm 8400,00

191800 80,00 X 2500 X 6000 mm 9600,00

191890 90,00 X 2500 X 6000 mm 10800,00

191900 100,00 X 2500 X 6000 mm 12000,00

191920 120,00 X 2000 X 4000 mm 7680,00

191930 130,00 X 2000 X 4000 mm 8320,00

191940 140,00 X 2000 X 4000 mm 8960,00

191950 150,00 X 2000 X 4000 mm 9600,00

Article no. Dimension Kg/plate

ARTICLE GROUP 169

Article no. Dimension Kg/plate

169052 8,00 X 2500 X 8000 mm 1280,00

169062 10,00 X 2500 X 8000 mm 1600,00

169080 16,00 X 2500 X 6000 mm 1920,00

169090 20,00 X 2500 X 6000 mm 2400,00169102 25,00 X 2500 X 8000 mm 4000,00

169110 30,00 X 2500 X 6000 mm 3600,00

169120 40,00 X 2500 X 6000 mm 4800,00

Steel plates WELDOX 500EHigh strength structural steel according. to EN 10 137 part 1 and 2.WX 500 has obtained its mechanical properties bythermomechanical rolling (M) or by quenching andtempering process (Q) at our discretion as determined byus unless otherwise agreed.Impact tested at -40 degr.C.Tolerances: Thickness acc. to EN 10 029 class A or withmore narrow tolerances (AccuRollTech TM).Tolerances on flatness acc. to EN 10 029 class N.Inspection certificate acc. to EN 10 204-3.1.C-DNV.Marking: Shot blasted and primed on both sides with greyprimer.Quality dot matrix marked along side.Chargenumber stamped in the material.

ARTICLE GROUP 171

Article no. Dimension Kg/plate

171135 6,00 X 1500 X 2500 mm 180,00171140 6,00 X 2500 X 6000 mm 720,00

171155 8,00 X 1500 X 2500 mm 240,00171160 8,00 X 2500 X 6000 mm 960,00

171165 10,00 X 1500 X 2500 mm 300,00171175 10,00 X 2500 X 6000 mm 1200,00

171180 12,00 X 1500 X 2500 mm 360,00171190 12,00 X 2500 X 6000 mm 1440,00171192 12,00 X 2500 X 7000 mm 1680,00

171201 15,00 X 2500 X 8000 mm 2400,00

171203 16,00 X 1500 X 2500 mm 480,00171210 16,00 X 2500 X 6000 mm 1920,00

171215 20,00 X 1600 X 2500 mm 640,00171220 20,00 X 2500 X 6000 mm 2400,00171222 20,00 X 2500 X 8000 mm 3200,00

171225 25,00 X 1500 X 2500 mm 750,00171245 25,00 X 2500 X 6000 mm 3000,00

171260 30,00 X 1500 X 2500 mm 900,00171275 30,00 X 2500 X 6000 mm 3600,00

171290 40,00 X 1500 X 2500 mm 1200,00171305 40,00 X 2500 X 6000 mm 4800,00

171320 50,00 X 1500 X 2500 mm 1500,00171332 50,00 X 2500 X 6000 mm 6000,00

171350 60,00 X 1500 X 2500 mm 1800,00171355 60,00 X 2000 X 4000 mm 3840,00171360 60,00 X 2500 X 6000 mm 7200,00

171365 70,00 X 1500 X 2500 mm 2100,00171370 70,00 X 2500 X 6000 mm 8400,00

171380 80,00 X 2500 X 6000 mm 9600,00

171390 90,00 X 2000 X 4000 mm 5760,00

171410 110,00 X 2000 X 4000 mm 7040,00171420 120,00 X 2000 X 4000 mm 7680,00

Steel plates WELDOX 700EExtra high strength structural steel,quenched and tempered acc. to EN 10 137 part 1 and 2.Impact tested at -40 degr.C.Tolerances: Thickness acc. to EN 10 029 class A or with morenarrow tolerances (AccuRollTech TM).Tolerances on flatness acc. to EN 10 029 class N.Inspection certificate acc. to EN 10 204-3.1.C-DNV.Marking: Shot blasted and primed on both sides with grey primer.Quality dot matrix marked along side.Chargenumber stamped in the material.

Page 12: Steel Sections

www.norskstaal.no10 1010

STEEL

ARTICLE GROUP 167

Article no. Dimension Kg/plate

167060 4,00 X 2500 X 6000 mm 480,00

167100 5,00 X 2500 X 6000 mm 600,00

167140 6,00 X 1500 X 2500 mm 180,00167160 6,00 X 2500 X 6000 mm 720,00

167170 8,00 X 1500 X 2500 mm 240,00167180 8,00 X 2500 X 6000 mm 960,00

167194 10,00 X 1500 X 2500 mm 300,00167199 10,00 X 2500 X 6000 mm 1200,00

167205 12,00 X 1500 X 2500 mm 360,00167212 12,00 X 2500 X 6000 mm 1440,00167213 12,00 X 2500 X 7000 mm 1680,00

167216 15,00 X 2500 X 6000 mm 1800,00

167220 16,00 X 1500 X 2500 mm 480,00167224 16,00 X 2500 X 6000 mm 1920,00

167227 20,00 X 1500 X 2500 mm 600,00167235 20,00 X 2500 X 6000 mm 2400,00

167240 25,00 X 1500 X 2500 mm 750,00167260 25,00 X 2500 X 6000 mm 3000,00

167285 30,00 X 1500 X 2500 mm 900,00167295 30,00 X 2500 X 6000 mm 3600,00

167325 40,00 X 1500 X 2500 mm 1200,00167332 40,00 X 2500 X 6000 mm 4800,00167333 40,00 X 2500 X 7000 mm 5600,00

167340 45,00 X 2000 X 6000 mm 4320,00

167350 50,00 X 1500 X 2500 mm 1500,00167380 50,00 X 1500 X 7515 mm 4509,00167385 50,00 X 2500 X 6000 mm 6000,00

167395 60,00 X 1500 X 6000 mm 4320,00

167412 63,00 X 1500 X 8200 mm 6199,00

167425 70,00 X 1500 X 5000 mm 4200,00

Steel plates HARDOX 400“Abrasion resistant plate”Good weldability and good bending properties,Brinellhardness 370-430HB.Thicknesstolerances acc. to EN 10 029 class A or withmore narrow tolerances (AccuRollTech TM).Tolerances on flatness acc. to EN 10 029 class N.Inspection certificate according to EN 10 029 class N.Marking: Shot blasted and primed on both sides with redbrown primer.Quality dot matrix marked along side.

ARTICLE GROUP 168

Article no. Dimension Kg/plate

168010 10,00 X 1500 X 3000 mm 360,00168012 12,00 X 1500 X 2500 mm 360,00

168030 16,00 X 1500 X 3000 mm 576,00

168050 20,00 X 1500 X 3000 mm 720,00

168060 25,00 X 1500 X 3000 mm 900,00168073 25,00 X 2500 X 6000 mm 3000,00

168081 30,00 X 2500 X 6000 mm 3600,00

168085 40,00 X 1500 X 3000 mm 1440,00168088 40,00 X 2500 X 6400 mm 5120,00

168090 50,00 X 1500 X 3000 mm 1800,00168100 50,00 X 2000 X 4000 mm 3200,00

168130 60,00 X 2000 X 4000 mm 3840,00

Steel plates HARDOX 500“Abrasion resistant plate”Brinellhardness: 470-530HB 4-32 mm

450-540 (32)- 80 mmThicknesstolerances acc. to EN 10 029 class A or withmore narrow tolerances (AccuRollTech TM).Tolerances on flatness acc. to EN 10 029 class N.Inspection certificate according to EN 10 029 class N.Marking: Shot blasted and primed on both sides with redbrown primer.Quality dot matrix marked along side.

Steel Checker plates S235JRG2acc, to EN 10 025.Delivered with standard checkered pattern.Tolerances acc. to EN 10 051.Test report acc. to EN 10 204-2.2Marking: Red corner

ARTICLE GROUP 152

Article no. Dimension Kg/plate

152003 3,00 X 1000 X 2000 mm 60,00152005 3,00 X 1250 X 2500 mm 94,00

Steel Tear plates S235JRG2acc, to EN 10 025.Delivered with standard checkered ´´teardrop´´ pattern.Tolerances acc. to EN 10 051.Inspection certificate acc. to EN 10 204-3.1.BMarking: Red corner

ARTICLE GROUP 153

Article no. Dimension Kg/plate

153140 5,00 X 1000 X 2000 mm 84,00153150 5,00 X 1250 X 2500 mm 131,00153200 6,00 X 1000 X 2000 mm 102,00153210 6,00 X 1250 X 2500 mm 159,00

Page 13: Steel Sections

11

ARTICLE GROUP 1

Article no. Dimension Kg/m Lengths

1064 16 mm 1,61 6 m 1071 19 mm 2,27 6 m 1078 20 mm 2,51 6 m 1085 22 mm 3,04 6 m 1092 25 mm 3,93 6 m 1109 30 mm 5,66 6 m1148 50 mm 15,70 6 m1183 75 mm 35,40 6 m1185 80 mm 40,20 6 m

Steel rounds NVATolerances acc. to EN 10 060.Length tolerances +/-100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow end.

ARTICLE GROUP 73

Article no. Dimension Kg/m Lengths

73070 70 mm X Ø 30,80 6-7,5 m73075 75 mm X Ø 35,40 6-7,5 m

73080 80 mm X Ø 40,20 6-7,5 m 73085 85 mm X Ø 45,40 6-7,5 m 73090 90 mm X Ø 50,90 6-7,5 m

73100 100 mm X Ø 62,90 6-7,5 m 73105 105 mm X Ø 69,30 6-7,5 m 73110 110 mm X Ø 76,10 6-7,5 m 73115 115 mm X Ø 83,10 6-7,5 m

73120 120 mm X Ø 90,50 6-7,5 m

73125 125 mm X Ø 98,20 6-7,5 m 73130 130 mm X Ø 106,00 6-7,5 m 73140 140 mm X Ø 123,00 6-7,5 m 73150 150 mm X Ø 141,00 6-7,5 m 73160 160 mm X Ø 161,00 6-7,5 m 73170 170 mm X Ø 182,00 6-7,5 m 73180 180 mm X Ø 204,00 6-7,5 m 73190 190 mm X Ø 227,00 6-7,5 m

73200 200 mm X Ø 251,00 6-7,5 m 73210 210 mm X Ø 277,00 6-7,5 m 73220 220 mm X Ø 304,00 6-7,5 m 73230 230 mm X Ø 333,00 6-7,5 m 73240 240 mm X Ø 362,00 6-7,5 m73250 250 mm X Ø 385,30 6-7,5 m 73260 260 mm X Ø 425,00 6-7,5 m 73280 280 mm X Ø 493,00 6-7,5 m 73290 290 mm X Ø 532,00 6-7,5 m

73300 300 mm X Ø 566,00 6-7,5 m 73320 320 mm X Ø 648,00 6-7,5 m 73330 330 mm X Ø 684,00 6-7,5 m 73350 350 mm X Ø 770,00 6-7,5 m

Steel rounds/shafts S355J2G3+N(XM/M520/IM) acc. to EN 10 025.Tolerances acc. to EN 10 060.Length tolerances +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.Chargenumber and DNV stamped on the ends ofrounds/shafts.MARKING: Aluminium ends.

11

STEEL

ARTICLE GROUP 155

Article no. Dimension Kg/plate

155140 5,00 X 1000 X 2000 mm 84,00155150 5,00 X 1250 X 2500 mm 131,00155180 5,00 X 1500 X 6000 mm 378,00155190 5,00 X 2000 X 6000 mm 504,00155192 5,00 X 2500 X 5000 mm 524,00

155200 6,00 X 1000 X 2000 mm 102,00155210 6,00 X 1250 X 2500 mm 159,00155240 6,00 X 1500 X 6000 mm 459,00155260 6,00 X 2000 X 6000 mm 612,00155262 6,00 X 2500 X 5000 mm 636,00

155290 8,00 X 1500 X 6000 mm 603,00155310 8,00 X 2000 X 6000 mm 804,00155320 8,00 X 2500 X 8000 mm 1340,00

155350 10,00 X 1500 X 6000 mm 747,00155360 10,00 X 2000 X 6000 mm 996,00155370 10,00 X 2500 X 8000 mm 1660,00

155380 12,00 X 2000 X 6000 mm 1188,00

ARTICLE GROUP 19

Article no. Dimension Kg/m Lengths

19018 6 mm 0,23 6 m 19030 8 mm 0,40 6 m

19040 10 mm 0,63 6 m

19045 12 mm 0,91 6 m

19050 16 mm 1,61 6 m

19055 20 mm 2,51 6 m

19060 22 mm 3,04 6 m

19065 25 mm 3,93 6 m

19070 30 mm 5,66 6 m

19075 32 mm 6,44 6 m

19080 35 mm 7,70 6 m

19090 40 mm 12,70 6 m

19148 50 mm 15,70 6 m

Steel Tear plates NVA acc. to rules for classifications of ships, newbuilding, 1. jan. 2003.delivered with standard “ Teardrop” pattern.Thickness tolerances acc. to DNV-rules.Remaining tolerances and flatness acc. to EN 10 029.Inspection certificate acc. to EN 10 204-3.1.C.-DNV.MARKING: Yellow corner.

Steel rounds/shafts S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4-MDS Y01 Rev. 4.Tolerances acc. to EN 10 060.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Red corner.

www.norskstaal.no

Page 14: Steel Sections

www.norskstaal.no12

STEEL

1212 1212

ARTICLE GROUP 5

Article no. Dimension Kg/m Lengths

5007 76 X 38 mm 18,23 6 m5013 50 X 25 mm 7,85 6 m5016 60 X 30 mm 11,30 6 m

Steel half rounds NVATolerances acc. to DIN 1018.Lenght tolerances -0/+100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow ends.

ARTICLE GROUP 72

Article no. Dimension Kg/m Lengths

72016 16 mm X Ø 1,61 6 m

72020 20 mm X Ø 2,51 6 m72025 25 mm X Ø 3,93 6 m

72030 30 mm X Ø 5,66 6 m72032 32 mm X Ø 6,44 6 m72035 35 mm X Ø 7,70 6 m72038 38 mm X Ø 9,08 6 m

72040 40 mm X Ø 10,10 6 m72045 45 mm X Ø 12,70 6 m

72050 50 mm X Ø 15,70 6 m72055 55 mm X Ø 19,00 6 m

72060 60 mm X Ø 22,60 6 m72065 65 mm X Ø 26,60 6 m

Steel rounds/shafts S355JOacc. to EN 10 025.(NORSOK M-120 Rev.4 MDS Y04 Rev.1.Tolerances acc. to EN10 060.Length tolerances +/- 100 mm.Impact tested at 0 degr. C, min. 27 J.Inspection cetificate acc. to EN 10 204-3.1.B.Under 50 mm chargenumber stamped at tags. Above 50 mm chargenumber stamped on the end ofrounds/shafts.MARKING: Aluminium ends.

ARTICLE GROUP 75

Article no. Dimension Kg/m Lengths

75016 16 mm 1,61 3 m

75020 20 mm 2,52 4-6 m75025 25 mm 3,93 4-6 m

75030 30 mm 5,66 4-6 m75032 32 mm 6,44 4-6 m75035 35 mm 7,70 4-6 m75038 38 mm 9,08 4-6 m

75040 40 mm 10,10 4-6 m75045 45 mm 12,80 4-6 m

75050 50 mm 15,70 4-6 m

75060 60 mm 22,60 4-6 m75065 65 mm 26,50 4-6 m

75070 70 mm 30,80 4-6 m75075 75 mm 35,40 4-6 m

Steel rounds/shafts 34CrNiMo6acc. to EN 10 083-1 or acc. to SS2541-3.Quenched and tempered.Impact tested at -20 gr. C.Tolerances acc. to EN 10 060inspection certificate acc. to EN 10 204-3.1.B.MARKING: Vinered ends

Varenr. Dimensjon Kg/m Lengder

75080 80 mm 40,30 4-6 m

75070 70 mm 30,80 4-6 m75075 75 mm 35,40 4-6 m

75080 80 mm 40,30 4-6 m

75090 90 mm 50,90 4-6 m

75100 100 mm 62,90 4-6 m 75110 110 mm 76,10 4-6 m

75120 120 mm 90,60 4-6 m 75125 125 mm 98,20 4-6 m

75130 130 mm 106,00 4-6 m

75140 140 mm 123,00 4-6 m

75150 150 mm 142,00 4-6 m

75160 160 mm 161,00 4-6 m

75180 180 mm 204,00 4-6 m

75200 200 mm 252,00 4-6 m

Page 15: Steel Sections

www.norskstaal.no 13

STEEL

ARTICLE GROUP 2

Article no. Dimension Kg/m Lengths

2010 6 mm 0,29 6 m2025 8 mm 0,51 6 m

2030 10 mm 0,80 6 m2040 12 mm 1,15 6 m2047 16 mm 2,05 6 m

2050 20 mm 3,20 6 m2057 22 mm 3,88 6 m2064 25 mm 5,00 6 m

2069 30 mm 7,21 6 m

2078 40 mm 12,80 6 m

2092 50 mm 20,00 6 m

2099 60 mm 28,80 6 m

2134 100 mm 80,10 6 m

Steel squares S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y01 Rev. 4.Tolerances acc. to EN 1014.Length tolerances +/- 100 mm.Test report acc. to EN 10 204-2.2.MARKING: red ends

Steel flats S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y01 Rev. 4.Tolerances acc. to EN 1017.Length tolerances +/- 100 mm.Test report acc. to EN 10 204-2.2.MARKING: red ends

ARTICLE GROUP 20

Article no. Dimension Kg/m Lengths

20015 16 X 3 mm 0,38 4 m20022 20 X 3 mm 0,48 4 m20029 25 X 3 mm 0,60 4 m20037 30 X 3 mm 0,72 4 m20043 40 X 3 mm 0,96 4 m20057 50 X 3 mm 1,20 4 m20092 75 X 3 mm 1,80 4 m20112 100 X 3 mm 2,40 4 m

20180 16 X 5 mm 0,64 6 m20193 20 X 5 mm 0,80 6 m20215 25 X 5 mm 1,00 6 m20222 30 X 5 mm 1,20 6 m20227 35 X 5 mm 1,40 6 m20230 40 X 5 mm 1,60 6 m20235 50 X 5 mm 2,00 6 m20238 60 X 5 mm 2,40 6 m20241 70 X 5 mm 2,80 6 m20245 80 X 5 mm 3,20 6 m20248 100 X 5 mm 4,00 6 m20260 130 X 5 mm 5,20 6 m

Varenr. Dimensjon Kg/m Lengder

20283 25 X 6 mm 1,20 6 m20285 30 X 6 mm 1,44 6 m20288 40 X 6 mm 1,92 6 m20291 50 X 6 mm 2,40 6 m20295 60 X 6 mm 2,88 6 m20298 65 X 6 mm 3,12 6 m20300 70 X 6 mm 3,36 6 m20303 75 X 6 mm 3,60 6 m20305 80 X 6 mm 3,84 6 m20308 100 X 6 mm 4,80 6 m20312 120 X 6 mm 5,77 6 m20315 150 X 6 mm 7,21 6 m

20318 20 X 8 mm 1,28 6 m20320 25 X 8 mm 1,60 6 m20323 30 X 8 mm 1,92 6 m20325 40 X 8 mm 2,56 6 m20328 50 X 8 mm 3,20 6 m20330 60 X 8 mm 3,84 6 m20336 70 X 8 mm 4,48 6 m20341 75 X 8 mm 4,80 6 m20346 80 X 8 mm 5,12 6 m20356 100 X 8 mm 6,41 6 m20361 120 X 8 mm 7,69 6 m20366 130 X 8 mm 8,33 6 m20376 150 X 8 mm 9,61 6 m

20391 30 X 10 mm 2,40 6 m20401 40 X 10 mm 3,20 6 m20411 50 X 10 mm 4,00 6 m20416 60 X 10 mm 4,80 6 m20421 65 X 10 mm 5,20 6 m20426 70 X 10 mm 5,60 6 m20431 75 X 10 mm 6,01 6 m20436 80 X 10 mm 6,41 6 m20441 90 X 10 mm 7,21 6 m20446 100 X 10 mm 8,01 6 m20451 120 X 10 mm 9,61 6 m20456 130 X 10 mm 10,40 6 m20461 150 X 10 mm 12,00 6 m

20481 40 X 12 mm 3,84 6 m20491 50 X 12 mm 4,80 6 m20496 60 X 12 mm 5,77 6 m20511 75 X 12 mm 7,21 6 m20516 80 X 12 mm 7,69 6 m20526 100 X 12 mm 9,61 6 m20531 120 X 12 mm 11,50 6 m20541 150 X 12 mm 14,40 6 m

20566 50 X 15 mm 6,01 6 m20571 60 X 15 mm 7,21 6 m20586 80 X 15 mm 9,61 6 m20591 90 X 15 mm 10,80 6 m20596 100 X 15 mm 12,00 6 m20601 120 X 15 mm 14,40 6 m20616 150 X 15 mm 18,00 6 m

20631 40 X 20 mm 6,41 6 m20636 50 X 20 mm 8,01 6 m20641 60 X 20 mm 9,61 6 m20656 75 X 20 mm 12,00 6 m20661 80 X 20 mm 12,80 6 m20671 100 X 20 mm 16,00 6 m20676 120 X 20 mm 19,20 6 m20691 150 X 20 mm 24,00 6 m

20711 50 X 25 mm 10,00 6 m

20771 50 X 30 mm 12,00 6 m20801 100 X 30 mm 24,00 6 m20811 150 X 30 mm 36,00 6 m

20881 100 X 50 mm 40,00 6 m

Page 16: Steel Sections

www.norskstaal.no1414 1414 14

STEEL

ARTICLE GROUP 3

Article no. Dimension Kg/m Lengths

3113 40 X 5 mm 1,60 6 m3123 50 X 5 mm 2,00 6 m3128 60 X 5 mm 2,40 6 m3138 70 X 5 mm 2,80 6 m3148 80 X 5 mm 3,20 6 m3166 100 X 5 mm 4,00 6 m3173 120 X 5 mm 4,80 6 m3178 130 X 5 mm 5,20 6 m3183 150 X 5 mm 6,01 6 m3197 20 X 6 mm 0,96 6 m

3203 25 X 6 mm 1,20 6 m3206 30 X 6 mm 1,44 6 m3216 40 X 6 mm 1,92 6 m3226 50 X 6 mm 2,40 6 m3231 60 X 6 mm 2,88 6 m3236 65 X 6 mm 3,12 6 m3241 70 X 6 mm 3,36 6 m3246 75 X 6 mm 3,60 6 m3251 80 X 6 mm 3,84 6 m3256 90 X 6 mm 4,32 6 m3261 100 X 6 mm 4,80 6 m3266 120 X 6 mm 5,77 6 m3281 150 X 6 mm 7,21 6 m

3288 20 X 8 mm 1,28 6 m3293 25 X 8 mm 1,60 6 m3298 30 X 8 mm 1,92 6 m3311 40 X 8 mm 2,56 6 m3321 50 X 8 mm 3,20 6 m3326 60 X 8 mm 3,84 6 m3331 65 X 8 mm 4,16 6 m3336 70 X 8 mm 4,48 6 m3341 75 X 8 mm 4,80 6 m3346 80 X 8 mm 5,12 6 m3351 90 X 8 mm 5,77 6 m3356 100 X 8 mm 6,41 6 m3361 120 X 8 mm 7,69 6 m3366 130 X 8 mm 8,33 6 m3371 140 X 8 mm 8,97 6 m3376 150 X 8 mm 9,61 6 m

3383 20 X 10 mm 1,60 6 m3388 25 X 10 mm 2,00 6 m3391 30 X 10 mm 2,40 6 m3401 40 X 10 mm 3,20 6 m3411 50 X 10 mm 4,00 6 m3416 60 X 10 mm 4,80 6 m3421 65 X 10 mm 5,20 6 m3426 70 X 10 mm 5,60 6 m3431 75 X 10 mm 6,01 6 m3436 80 X 10 mm 6,41 6 m3441 90 X 10 mm 7,21 6 m3446 100 X 10 mm 8,01 6 m3451 120 X 10 mm 9,61 6 m3456 130 X 10 mm 10,40 6 m

Steel flats NVATolerances acc. to EN10 058.Length tolerances +/-100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow ends.

3458 140 X 10 mm 11,20 6 m3461 150 X 10 mm 12,00 6 m

3475 30 X 12 mm 2,88 6 m3477 35 X 12 mm 3,36 6,3 m3481 40 X 12 mm 3,84 6 m3491 50 X 12 mm 4,80 6 m3496 60 X 12 mm 5,77 6 m3506 70 X 12 mm 6,73 6 m3511 75 X 12 mm 7,21 6 m3516 80 X 12 mm 7,69 6 m3526 100 X 12 mm 9,61 6 m3531 120 X 12 mm 11,50 6 m3536 130 X 12 mm 12,50 6 m3541 150 X 12 mm 14,40 6 m3549 30 X 15 mm 3,60 6 m3551 35 X 15 mm 4,20 5,3 m3556 40 X 15 mm 4,80 6 m3566 50 X 15 mm 6,01 6 m3571 60 X 15 mm 7,21 6 m3576 65 X 15 mm 7,81 6 m3578 70 X 15 mm 8,41 6 m3581 75 X 15 mm 9,01 6 m3586 80 X 15 mm 9,61 6 m3596 100 X 15 mm 12,00 6 m3601 120 X 15 mm 14,40 6 m3606 130 X 15 mm 15,60 6 m3616 150 X 15 mm 18,00 6 m

3631 40 X 20 mm 6,41 6 m3636 50 X 20 mm 8,01 6 m3641 60 X 20 mm 9,61 6 m3651 70 X 20 mm 11,20 6 m3656 75 X 20 mm 12,00 6 m3661 80 X 20 mm 12,80 6 m3666 90 X 20 mm 14,40 6 m3671 100 X 20 mm 16,00 6 m3676 120 X 20 mm 19,20 6 m3681 130 X 20 mm 20,80 6 m3691 150 X 20 mm 24,00 6 m3701 40 X 25 mm 8,01 6 m3711 50 X 25 mm 10,00 6 m3716 60 X 25 mm 12,00 6 m3731 75 X 25 mm 15,00 6 m3736 80 X 25 mm 16,00 6 m3746 100 X 25 mm 20,00 6 m3751 120 X 25 mm 24,00 6 m3761 130 X 25 mm 26,00 6 m3766 150 X 25 mm 30,00 6 m

3771 50 X 30 mm 12,00 6 m3791 80 X 30 mm 19,20 6 m3801 100 X 30 mm 24,00 6 m3811 150 X 30 mm 36,00 6 m

3831 70 X 40 mm 22,40 6 m3851 100 X 40 mm 32,00 6 m3866 150 X 40 mm 48,00 6 m

3871 75 X 50 mm 30,00 6 m

3881 100 X 50 mm 40,00 6 m

Article no. Dimension Kg/m Lengths

Page 17: Steel Sections

www.norskstaal.no 15

ARTICLE GROUP 160

Article no. Dimension Kg/m Lengths

160029 180 X 6 mm 8,64 6 m160036 200 X 6 mm 9,60 6 m160043 250 X 6 mm 12,00 6 m160050 300 X 6 mm 14,40 6 m

160064 180 X 8 mm 11,52 6 m160071 200 X 8 mm 12,80 6 m160078 250 X 8 mm 16,00 6 m160085 300 X 8 mm 19,20 6 m

160106 160 X 10 mm 12,80 6 m160120 180 X 10 mm 14,40 6 m160127 200 X 10 mm 16,00 6 m160141 250 X 10 mm 20,00 6 m160148 300 X 10 mm 24,00 6 m

160183 180 X 12 mm 17,28 6 m160190 200 X 12 mm 19,20 6 m160197 250 X 12 mm 24,00 6 m160204 300 X 12 mm 28,80 6 m160226 180 X 15 mm 21,60 6 m160227 200 X 15 mm 24,00 6 m160229 250 X 15 mm 30,00 6 m160230 300 X 15 mm 36,00 6 m

160295 180 X 20 mm 28,80 6 m160302 200 X 20 mm 32,00 6 m160309 250 X 20 mm 40,00 6 m160316 300 X 20 mm 48,00 6 m

160351 200 X 25 mm 40,00 6 m160358 250 X 25 mm 50,00 6 m160365 300 X 25 mm 60,00 6 m

160386 200 X 30 mm 48,00 6 m160393 250 X 30 mm 60,00 6 m160400 300 X 30 mm 72,00 6 m

160407 200 X 40 mm 64,00 6 m160421 250 X 40 mm 80,00 6 m

Steel wide flats NVAas rolled or cut from plateTolerances acc. to DIN 59 200, or EN 10 024 at our discretion.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow ends.

1515 1515

STEEL

ARTICLE GROUP 9

Article no. Dimension Kg/m Lengths

9020 40 X 6 mm 1,92 6 m9025 50 X 6 mm 2,40 6 m9030 60 X 6 mm 2,88 6 m9040 100 X 6 mm 4,80 6 m

9050 50 X 8 mm 3,20 6 m9060 60 X 8 mm 3,84 6 m9065 80 X 8 mm 5,12 6 m9070 100 X 8 mm 6,41 6 m9075 150 X 8 mm 9,61 6 m

9080 50 X 10 mm 4,00 6 m9090 60 X 10 mm 4,80 6 m9095 75 X 10 mm 6,00 6 m9100 80 X 10 mm 6,40 6 m9110 100 X 10 mm 8,00 6 m9150 150 X 10 mm 12,00 6 m

9180 100 X 12 mm 9,61 6 m9200 150 X 12 mm 14,40 6 m

Steel flats S355J2G4acc, to EN 10 025.(NORSOK M 120 Rev. 4-MDS Y05 Rev. 2 with control.Tolerances acc. to EN 10 058.Length tolerances +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

Steel flat rails S355JOacc, to EN 10 025.Delivered with 2 round corners.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

ARTICLE GROUP 33

Article no. Dimension Kg/m Lengths Kg/Lengths

33008 30 X 50 mm 11,80 10 m 118,033015 40 X 60 mm 19,00 10 m 190,0

ARTICLE GROUP 58

Article no. Dimension Kg/m Lengths Kg/Lengths

58045 45 22,70 12 m 272,458055 55 32,70 12 m 392,458065 65 44,40 12 m 532,858075 75 57,80 12 m 693,658100 100 76,70 12 m 920,458120 120 103,40 12 m 1240,8

Steel crane railsacc, to DIN 536-1.Tensile strength min. 690 N/mm2.Delivered with straight ends.Length tolerances +/- 50 mm.Decleration of compliance with the order acc. to EN 10 204-2.1

Page 18: Steel Sections

ARTICLE GROUP 162

Article no. Dimension Kg/m Lengths

162110 200 X 10 mm 16,00 6 m162112 200 X 12 mm 19,20 6 m162115 200 X 15 mm 24,00 6 m162210 250 x 10 mm 20,00 6 m162212 250 X 12 mm 24,00 6 m162312 300 X 12 mm 28,80 6 m162315 300 X 15 mm 36,00 6 m

www.norskstaal.no1616 1616 16

STEEL

Steel bulb flats (HP) NVATolerances acc. to EN 10 067.Length tolerances -0/+100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow ends.

ARTICLE GROUP 4

Article no. Dimension Kg/m Lengths

4200 80 X 6,0 mm 4,95 6 m4210 100 X 6,0 mm 6,20 6 m4220 120 X 6,0 mm 7,42 6 m

4226 80 X 7,0 mm 5,60 6 m4230 100 X 7,0 mm 7,00 6 m4240 120 X 7,0 mm 8,42 6 m4250 140 X 7,0 mm 9,93 6 m4260 160 X 7,0 mm 11,63 6 m

4280 100 X 8,0 mm 7,80 6 m4290 120 X 8,0 mm 9,35 6 m4300 140 X 8,0 mm 11,01 6 m4310 160 X 8,0 mm 12,95 6 m4340 180 X 8,0 mm 15,10 12 m

4350 140 X 9,0 mm 12,14 6 m4360 160 X 9,0 mm 14,28 6 m4390 180 X 9,0 mm 16,52 12 m4400 200 X 9,0 mm 18,87 12 m

4420 180 X 10,0 mm 17,95 12 m4430 200 X 10,0 mm 20,50 12 m4440 220 X 10,0 mm 23,26 12 m4450 240 X 10,0 mm 25,91 12 m4460 260 X 10,0 mm 28,87 12 m

4485 260 X 11,0 mm 30,91 12 m4490 280 X 11,0 mm 34,17 12 m4500 300 X 11,0 mm 37,36 12 m

4510 200 X 11,5 mm 22,80 12 m4520 220 X 11,5 mm 25,91 12 m

4521 220 X 12,0 mm 26,72 12 m4530 240 X 12,0 mm 29,86 12 m4540 260 X 12,0 mm 33,05 12 m4550 280 X 12,0 mm 36,41 12 m4560 300 X 12,0 mm 39,00 12 m

Steel wide flats S355J264acc. to EN 10 025.(NORSOK M-120 Rev. 4-MDS Y05 Rev.2 with control)Tolerances acc. to DIN 59 200 or EN 10 029.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

4570 320 X 12,0 mm 43,35 12 m4580 340 X 12.0 mm 47,02 12 m

4600 370 X 13,0 mm 55,70 12 m

4610 340 X 14,0 mm 52,55 12 m4615 400 X 14,0 mm 65,18 12 m

Article no. Dimension Kg/m Lengths

Steel bulb flats (HP) NVD 36Tolerances acc. to EN 10 067.Length tolerance +/-100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Aluminium ends.

ARTICLE GROUP 13

Article no. Dimension Kg/m Lengths

13120 120 X 8 mm 9,35 12 m13140 140 X 8 mm 11,01 12 m13160 160 X 8 mm 12,95 12 m13180 180 X 8 mm 15,10 12 m

13198 200 X 9 mm 18,87 12 m

13190 180 X 10 mm 17,95 12 m

13200 200 X 10 mm 20,50 12 m13220 220 X 10 mm 23,26 12 m13240 240 X 10 mm 25,91 12 m13260 260 X 10 mm 28,87 12 m

13300 300 X 11 mm 37,36 12 m13303 240 X 12 mm 29,86 12 m13306 260 X 12 mm 33,05 12 m

ARTICLE GROUP 21

Article no. Dimension Kg/m Lengths

21024 20 X 20 X 3 mm 0,90 6 m

21032 25 X 25 X 3 mm 1,14 6 m21040 25 X 25 X 4 mm 1,48 6 m

21056 30 X 30 X 3 mm 1,39 6 m21064 30 X 30 X 4 mm 1,82 6 m21068 30 X 30 X 5 mm 2,22 6 m

21072 35 X 35 X 4 mm 2,14 6 m

21080 40 X 40 X 4 mm 2,47 6 m21085 40 X 40 X 5 mm 3,03 6 m

21097 50 X 50 X 5 mm 3,85 6 m

Steel angles S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y01 Rev. 4)Tolerances acc. to EN 10 056 part 1 and part 2. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Red ends.

Page 19: Steel Sections

www.norskstaal.no 17

ARTICLE GROUP 15

Article no. Dimension Kg/m Lengths

15092 50 X 50 X 5 mm 3,85 6 m15099 50 X 50 X 6 mm 4,56 6 m15106 50 X 50 X 7 mm 5,25 6 m15109 50 X 50 X 8 mm 5,94 6 m

15120 60 X 60 X 6 mm 5,53 6 m15123 60 X 60 X 6 mm 5,53 12 m15134 60 X 60 X 8 mm 7,23 6 m15138 60 X 60 X 10 mm 8,86 6 m

15141 65 X 65 X 7 mm 6,97 6 m15152 65 X 65 X 9 mm 8,79 6 m

15155 70 X 70 X 7 mm 7,53 6 m15158 70 X 70 X 7 mm 7,53 12 m15165 70 X 70 X 9 mm 9,53 12 m

15169 75 X 75 X 8 mm 9,21 6 m15176 75 X 75 X 8 mm 9,21 12 m15183 75 X 75 X 10 mm 11,30 6 m15184 75 X 75 X 10 mm 11,30 12 m

15190 80 X 80 X 8 mm 9,85 6 m15197 80 X 80 X 8 mm 9,85 12 m15207 80 X 80 X 10 mm 12,10 12 m

15218 90 X 90 X 9 mm 12,40 12 m

15232 100 X 100 X 10 mm 15,40 6 m

Steel angles NVATolerances acc. to EN 10 056-part 1 and part 2.Length tolerance +/-100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow ends.

STEEL

Article no. Dimension Kg/m Lengths

21099 50 X 50 X 6 mm 4,56 6 m

21108 55 X 55 X 6 mm 5,05 6 m

21109 50 X 50 X 8 mm 5,94 6 m21110 60 X 60 X 6 mm 5,53 6 m

21123 60 X 60 X 6 mm 5,53 12 m21134 60 X 60 X 8 mm 7,23 6 m

21143 65 X 65 X 7 mm 6,97 12 m

21155 70 X 70 X 7 mm 7,53 6 m21158 70 X 70 X 7 mm 7,53 12 m

21176 75 X 75 X 8 mm 9,21 12 m

21190 80 X 80 X 8 mm 9,85 6 m21197 80 X 80 X 8 mm 9,85 12 m

21218 90 X 90 X 9 mm 12,40 12 m

21232 100 X 100 X 10 mm 15,40 6 m21239 100 X 100 X 10 mm 15,40 12 m

21263 120 X 120 X 12 mm 22,05 12 m

21277 140 X 140 X 13 mm 28,10 12 m

21289 150 X 150 X 12 mm 27,95 12 m21291 150 X 150 X 15 mm 34,48 12 m

21295 200 X 200 X 16 mm 49,50 12 m

Steel angles S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y01 Rev. 4)Tolerances acc. to EN 10 056 part 1 and part 2. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Red ends.

ARTICLE GROUP 22

Article no. Dimension Kg/m Lengths

22025 40 X 20 X 4 mm 1,81 6 m

22033 45 X 30 X 4 mm 2,30 6 m 22034 45 X 30 X 5 mm 2,83 6 m

22035 50 X 40 X 5 mm 3,42 6 m

22036 60 X 30 X 5 mm 3,44 6 m 22043 60 X 40 X 5 mm 3,84 6 m22050 60 X 40 X 6 mm 4,55 6 m22057 65 X 50 X 5 mm 4,44 6 m22060 65 X 50 X 7 mm 6,09 6 m 22063 65 X 50 X 7 mm 6,09 12 m

22069 75 X 50 X 6 mm 5,70 12 m 22071 75 X 50 X 7 mm 6,64 6 m 22073 75 X 50 X 7 mm 6,64 12 m

Article no. Dimension Kg/m Lengths

22079 75 X 50 X 8 mm 7,52 12 m

22092 80 X 40 X 6 mm 5,52 6 m

22114 100 X 50 X 6 mm 6,99 12 m 22115 100 X 50 X 8 mm 9,17 12 m 22128 100 X 65 X 7 mm 8,95 12 m 22129 100 X 65 X 8 mm 10,16 12 m 22137 100 X 75 X 8 mm 10,80 12 m 22139 100 X 75 X 9 mm 12,00 12 m

22151 120 X 80 X 8 mm 12,40 12 m 22155 120 X 80 X 10 mm 15,30 12 m

22167 130 X 65 X 8 mm 12,10 12 m 22169 130 X 65 X 10 mm 14,90 12 m

22187 150 X 75 X 9 mm 15,60 12 m 22188 150 X 75 X 10 mm 17,44 12 m 22196 150 X100 X 10 mm 19,40 12 m 22197 150 X100 X 12 mm 23,10 12 m

22242 200 X100 X 10 mm 23,50 12 m 22244 200 X100 X 12 mm 27,80 12 m

Page 20: Steel Sections

www.norskstaal.no181818

STEEL

Article no. Dimension Kg/m Lengths

15239 100 X 100 X 10 mm 15,40 12 m15246 100 X 100 X 12 mm 18,20 12 m

15253 110 X 110 X 10 mm 16,90 12 m

15260 120 X 120 X 11 mm 20,30 12 m15263 120 X 120 X 12 mm 22,05 12 m

15274 130 X 130 X 12 mm 24,10 12 m

15289 150 X 150 X 12 mm 27,95 12 m15290 150 X 150 X 14 mm 32,20 12 m15291 150 X 150 X 15 mm 34,48 12 m15292 150 X 150 X 16 mm 36,60 12 m

15295 200 X 200 X 16 mm 49,50 12 m

Steel angles NVATolerances acc. to EN 10 056-part 1 and part 2.Length tolerance +/-100 mm.Inspection certificate acc. to EN 10 204-3.1.C-DNV.MARKING: Yellow ends.

ARTICLE GROUP 16

Article no. Dimension Kg/m Lengths

16053 60 X 40 X 7 mm 5,24 6 m

16057 65 X 50 X 5 mm 4,44 6 m16058 65 X 50 X 6 mm 5,26 12 m16063 65 X 50 X 7 mm 6,09 12 m

16067 75 X 50 X 6 mm 5,70 6 m16069 75 X 50 X 6 mm 5,70 12 m16071 75 X 50 X 7 mm 6,64 6 m16073 75 X 50 X 7 mm 6,64 12 m16077 75 X 50 X 8 mm 7,52 6 m16079 75 X 50 X 8 mm 7,52 12 m

16092 80 X 40 X 6 mm 5,52 6 m16103 80 X 40 X 8 mm 7,21 12 m

16113 100 X 50 X 6 mm 6,99 6 m16114 100 X 50 X 6 mm 6,99 12 m16115 100 X 50 X 8 mm 9,17 12 m16118 100 X 50 X 8 mm 9,17 6 m16127 100 X 50 X10 mm 11,30 12 m16128 100 X 65 X 7 mm 8,95 12 m16129 100 X 65 X 8 mm 10,16 12 m16130 100 X 65 X 9 mm 11,30 12 m16131 100 X 65 X10 mm 12,48 12 m16137 100 X 75 X 8 mm 10,80 12 m16139 100 X 75 X 9 mm 12,00 12 m16140 100 X 75 X10 mm 13,36 12 m

16151 120 X 80 X 8 mm 12,40 12 m16155 120 X 80 X10 mm 15,30 12 m16163 120 X 80 X12 mm 18,20 12 m

16167 130 X 65 X 8 mm 12,10 12 m16169 130 X 65 X10 mm 14,90 12 m16171 130 X 65 X12 mm 17,75 12 m

Article no. Dimension Kg/m Lengths

16187 150 X 75 X 9 mm 15,60 12 m16188 150 X 75 X10 mm 17,44 12 m16190 150 X 75 X12 mm 20,45 12 m16192 150 X 90 X10 mm 18,56 12 m16194 150 X 90 X12 mm 22,00 12 m16196 150 X100 X10 mm 19,40 12 m16197 150 X100 X12 mm 23,10 12 m

16218 160 X 80 X12 mm 22,00 12 m

16242 200 X100 X10 mm 23,50 12 m16244 200 X100 X12 mm 27,80 12 m16245 200 X100 X14 mm 32,23 12 m

Steel angles S355J2G4acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y05 Rev. 2)Tolerances acc. to EN 10 056 part 1 and part 2.Length tolerances acc. to +/- 100 mm.Chargenumber stamped in both ends for profileswith weight from 15 kg/m. Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends+blue stroke.

ARTICLE GROUP 186

Article no. Dimension Kg/m Lengths

186045 40 X 40 X 5 mm 3,03 6 m

186049 50 X 50 X 5 mm 3,85 6 m186050 50 X 50 X 5 mm 3,85 12 m186054 50 X 50 X 6 mm 4,56 6 m186055 50 X 50 X 6 mm 4,56 12 m

186059 60 X 60 X 6 mm 5,53 6 m186060 60 X 60 X 6 mm 5,53 12 m186063 60 X 60 X 8 mm 7,23 12 m

186067 70 X 70 X 7 mm 7,53 6 m186068 70 X 70 X 7 mm 7,53 12 m186070 70 X 70 X 9 mm 9,53 12 m

186072 75 X 75 X 8 mm 9,21 6 m186073 75 X 75 X 8 mm 9,21 12 m186075 75 X 75 X 10 mm 11,30 12 m

186079 80 X 80 X 8 mm 9,85 6 m186080 80 X 80 X 8 mm 9,85 12 m186082 80 X 80 X 10 mm 12,10 12 m

186090 90 X 90 X 9 mm 12,40 12 m

186099 100 X 100 X 10 mm 15,40 6 m186100 100 X 100 X 10 mm 15,40 12 m186110 100 X 100 X 12 mm 18,20 12 m

186120 120 X 120 X 12 mm 22,05 12 m

186150 150 X 150 X 14 mm 32,20 12 m

186180 180 X 180 X 18 mm 48,60 12 m

186200 200 X 200 X 16 mm 49,50 12 m

Page 21: Steel Sections

www.norskstaal.no 191919

STEEL

ARTICLE GROUP 187

Article no. Dimension Kg/m Lengths

187030 75 X 50 X 7 mm 6,64 12 m

187114 100 X 65 X 7 mm 8,95 12 m187116 100 X 65 X 10 mm 12,60 12 m187117 100 X 50 X 8 mm 9,17 12 m187120 100 X 75 X 9 mm 12,00 12 m

187128 120 X 80 X 10 mm 15,30 12 m

187130 130 X 65 X 10 mm 14,90 12 m

187133 150 X 75 X 9 mm 15,60 12 m187135 150 X 75 X 11 mm 19,00 12 m187136 150 X 90 X 10 mm 18,56 12 m187138 150 X 100 X 12 mm 23,10 12 m

187139 180 X 90 X 10 mm 20,96 12 m187140 180 X 90 X 12 mm 24,88 12 m

187142 200 X 100 X 10 mm 23,50 12 m187150 200 X 100 X 12 mm 27,80 12 m

Steel angles S355J2G4acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y05 Rev. 2 with control)Tolerances acc. to EN 10 056 part 1 and part 2.Length tolerances acc. to +/- 100 mm.Chargenumber stamped in both ends for profileswith weight from 15 kg/m. Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends+blue stroke.

ARTICLE GROUP 24

Article no. Dimension Kg/m Lengths

24022 30 X 30 X 4 mm 1,81 6 m

24036 40 X 40 X 5 mm 3,02 6 m

24050 50 X 50 X 6 mm 4,53 6 m

24060 60 X 60 X 7 mm 6,35 12 m

24064 70 X 70 X 8 mm 8,49 12 m

24074 80 X 80 X 9 mm 10,90 12 m

24085 100 X 100 X 11 mm 16,70 12 m

24092 120 X 120 X 13 mm 23,70 12 m

24099 140 X 140 X 15 mm 31,90 12 m

Steel tees S235JRG2acc. to EN 10 025.Tolerances acc. to EN 10 055. Length tolerances acc. to +/- 100 mm.Test report acc. to EN 10 204-2.2.Marking: Red ends.

ARTICLE GROUP 40

Article no. Dimension Kg/m Lengths Kg/Length

40040 NR 40 (40X35) 4,97 6 m 29,840050 NR 50 (50X38) 5,70 6 m 34,240060 NR 60 (60X30) 5,17 6 m 31,040065 NR 65 7,20 6 m 43,2

Steel channels UNP S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y01 Rev. 4)Tolerances acc. to DIN 1026/EN 10 279. Length tolerances acc. to +/- 100 mm.Test report acc. to EN 10 204-2.2.Marking: Red ends.

ARTICLE GROUP 41

Article no. Dimension Kg/m Lengths Kg/Length

41080 UNP 80 8,81 6 m 52,9

41082 UNP 80 8,81 12 m 105,7

41100 UNP 100 10,80 6 m 64,841102 UNP 100 10,80 12 m 129,6

41120 UNP 120 13,70 6 m 82,241122 UNP 120 13,70 12 m 164,4

41142 UNP 140 16,30 12 m 195,6

Steel channels UNP S235JRG2acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y01 Rev. 4)Tolerances acc. to DIN 1026/EN 10 279. Length tolerances acc. to +/- 100 mm.Test report acc. to EN 10 204-2.2.Marking: Red ends.

Page 22: Steel Sections

www.norskstaal.no20

STEEL

Steel channels UPE S355Nacc. to EN 10 113-2.(NORSOK M-120 Rev. 4-MDS Y05 Rev. 2 with control)Tolerances acc. to DIN 1026/EN 10 279.Guaranteed Si 0.15-0.25%.Length tolerances -0/+100 mm.Inspection certificate acc. to EN 10 204-3.1.B.MARKING: Aluminium end.

ARTICLE GROUP 39

Article no. Profile no. Kg/m Lengths Kg/length

39092 UPE 80 8,10 12 m 97,239112 UPE 100 10,00 12 m 120,039132 UPE 120 12,40 12 m 148,839152 UPE 140 14,80 12 m 177,639172 UPE 160 17,30 12 m 207,639192 UPE 180 20,10 12 m 241,239205 UPE 200 23,30 15 m 349,539212 UPE 200 23,30 12 m 279,639225 UPE 220 27,10 15 m 406,539232 UPE 220 27,10 12 m 325,239245 UPE 240 30,80 15 m 462,039252 UPE 240 30,80 12 m 369,639275 UPE 270 35,90 15 m 538,539282 UPE 270 35,90 12 m 430,839302 UPE 300 45,30 12 m 543,639305 UPE 300 45,30 15 m 679,539332 UPE 330 54,40 12 m 652,839362 UPE 360 62,40 12 m 748,839402 UPE 400 73,80 12 m 885,6

ARTICLE GROUP 176

Article no. Profile no. Kg/m Lengths Kg/length

176100 UNP 100 10,80 12 m 129,6176120 UNP 120 13,70 12 m 164,4176140 UNP 140 16,30 12 m 195,6176160 UNP 160 19,20 12 m 230,4176180 UNP 180 22,40 12 m 268,8

176200 UNP 200 25,80 12 m 309,6176220 UNP 220 30,00 12 m 360,0176240 UNP 240 33,90 12 m 406,8176260 UNP 260 38,70 12 m 464,4176280 UNP 280 42,60 12 m 511,2

176300 UNP 300 47,10 12 m 565,2176350 UNP 350 61,80 12 m 741,6

176400 UNP 400 73,20 12 m 878,4

Steel channels UNP S355G11 + N/Macc. to NORSOK M-120, rev. 4MDS Y26 Rev. 3 and acc.to EN 10 225.Tolerances acc. to EN 10 034.Length tolerances -0/+100 mm.Chargenumber stamped in both ends.Inspection certificate acc. to EN 10 204-3.1.B.MARKING: Aluminium end + blue stroke.

ARTICLE GROUP 43

Article no. Dimension Kg/m Lengths Kg/Length

43082 UNP 80 8,81 12 m 105,743102 UNP 100 10,80 12 m 129,643122 UNP 120 13,70 12 m 164,443142 UNP 140 16,30 12 m 195,643162 UNP 160 19,20 12 m 230,443182 UNP 180 22,40 12 m 268,843202 UNP 200 25,80 12 m 309,643222 UNP 220 30,00 12 m 360,043242 UNP 240 33,90 12 m 406,843262 UNP 260 38,70 12 m 464,443282 UNP 280 42,60 12 m 511,243302 UNP 300 47,10 12 m 565,2

Steel channels UNP S355J2G4acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y04 Rev. 1 with control)Tolerances acc. to DIN 1026/EN 10 279. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

ARTICLE GROUP 49

Article no. Profile no. Kg/m Lengths Kg/length

49082 IPE 80 6,12 12 m 73,4

49102 IPE 100 8,26 12 m 99,1

49122 IPE 120 10,60 12 m 127,2

49142 IPE 140 13,20 12 m 158,449145 IPE 140 13,20 15 m 198,0

49162 IPE 160 16,10 12 m 193,249165 IPE 160 16,10 15 m 241,5

49182 IPE 180 19,20 12 m 230,449185 IPE 180 19,20 15 m 288,0

49202 IPE 200 22,90 12 m 274,849205 IPE 200 22,90 15 m 343,5

49222 IPE 220 26,70 12 m 320,449225 IPE 220 26,70 15 m 400,5

49242 IPE 240 31,30 12 m 375,649245 IPE 240 31,30 15 m 469,5

Steel sections IPE S355J2G4acc. to EN 10 025.(NORSOK M-120 Rev. 4 MDS Y05 Rev. 2 with control)Tolerances acc. to EN 10 058. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

Page 23: Steel Sections

www.norskstaal.no 21

Steel beams HEA S355J2G4acc. to EN 10 025(NORSOK M-120 Rev. 4 MDS Y05 Rev. 2 with control).Tolerances acc. to EN 10 034. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Chargenumber in both ends.Marking: Aluminium ends.

ARTICLE GROUP 48

Article no. Profile no. Kg/m Lengths Kg/length

48102 HEA 100 17,00 12 m 204,048105 HEA 100 17,00 15 m 255,0

48122 HEA 120 20,30 12 m 243,6

48142 HEA 140 25,20 12 m 302,448145 HEA 140 25,20 15 m 378,0

48162 HEA 160 31,00 12 m 372,048165 HEA 160 31,00 15 m 465,0

48182 HEA 180 36,20 12 m 434,448185 HEA 180 36,20 15 m 543,0

48202 HEA 200 43,10 12 m 517,248205 HEA 200 43,10 15 m 646,548206 HEA 200 43,10 20 m 862,0

48222 HEA 220 51,50 12 m 618,048225 HEA 220 51,50 15 m 772,548226 HEA 220 51,50 20 m 1030,0

48242 HEA 240 61,50 12 m 738,048245 HEA 240 61,50 15 m 922,548246 HEA 240 61,50 20 m 1230,0

48262 HEA 260 69,60 12 m 835,248265 HEA 260 69,60 15 m 1044,048266 HEA 260 69,60 20 m 1392,0

48281 HEA 280 77,90 24 m 1869,648282 HEA 280 77,90 12 m 934,848285 HEA 280 77,90 15 m 1168,5

48301 HEA 300 90,10 24 m 2162,448302 HEA 300 90,10 12 m 1081,248305 HEA 300 90,10 15 m 1351,5

48321 HEA 320 99,60 24 m 2390,448322 HEA 320 99,60 12 m 1195,248325 HEA 320 99,60 15 m 1494,0

48341 HEA 340 107,10 24 m 2570,448342 HEA 340 107,10 12 m 1285,2

48361 HEA 360 114,20 24 m 2740,848362 HEA 360 114,20 12 m 1370,448365 HEA 360 114,20 15 m 1713,0

48401 HEA 400 127,50 24 m 3060,048451 HEA 450 142,80 24 m 3427,248501 HEA 500 158,10 24 m 3794,448601 HEA 600 181,60 24 m 4358,4

21 2121

STEEL

Article no. Profile no. Kg/m Lengths Kg/length

49272 IPE 270 36,80 12 m 441,649275 IPE 270 36,80 15 m 552,049276 IPE 270 36,80 20 m 736,049284 IPE 270 36,80 24 m 883,2

49301 IPE 300 43,00 24 m 1032,049302 IPE 300 43,00 12 m 516,049305 IPE 300 43,00 15 m 645,0

49331 IPE 330 50,10 24 m 1202,449332 IPE 330 50,10 12 m 601,249335 IPE 330 50,10 15 m 751,5

49361 IPE 360 58,20 24 m 1396,849362 IPE 360 58,20 12 m 698,449365 IPE 360 58,20 15 m 873,0

49401 IPE 400 67,60 24 m 1622,449402 IPE 400 67,60 12 m 811,249405 IPE 400 67,60 15 m 1014,0

49451 IPE 450 79,20 24 m 1900,849452 IPE 450 79,20 12 m 950,4

49501 IPE 500 92,50 24 m 2220,049505 IPE 500 92,50 15 m 1387,549551 IPE 550 108,10 24 m 2594,4

49601 IPE 600 124,40 24 m 2985,6

Steel sections IPE S355G11+N/Macc. to NORSOK M-120 Rev. 4 MDS Y26 Rev. 3 and acc. to EN 10 225.Tolerances acc. to EN 10 034. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Chargenumber in both ends.Marking: Aluminium ends+blue stroke.

ARTICLE GROUP 177

Article no. Profile no. Kg/m Lengths Kg/length

177100 IPE 100 8,26 12 m 99,1177120 IPE 120 10,60 12 m 127,2177140 IPE 140 13,20 12 m 158,4177160 IPE 160 16,10 12 m 193,2177180 IPE 180 19,20 12 m 230,4

177200 IPE 200 22,80 12 m 273,6177220 IPE 220 26,70 12 m 320,4177240 IPE 240 31,30 12 m 375,6177270 IPE 270 36,80 12 m 441,6

177300 IPE 300 43,00 12 m 516,0177330 IPE 330 50,10 12 m 601,2177360 IPE 360 58,20 12 m 698,4

177400 IPE 400 67,60 12 m 811,2177450 IPE 450 79,20 12 m 950,4

177500 IPE 500 92,50 12 m 1110,0

177600 IPE 600 124,40 12 m 1492,8

Page 24: Steel Sections

www.norskstaal.no222222

STEEL

ARTICLE GROUP 178

Article no. Profile no. Kg/m Lengths Kg/length

178100 HEA 100 17,00 12 m 204,0178120 HEA 120 20,30 12 m 243,6178140 HEA 140 25,20 12 m 302,4178160 HEA 160 31,00 12 m 372,0178180 HEA 180 36,20 12 m 434,4

178200 HEA 200 43,10 12 m 517,2178220 HEA 220 51,50 12 m 618,0178240 HEA 240 61,50 12 m 738,0178260 HEA 260 69,60 12 m 835,2178280 HEA 280 77,90 12 m 934,8

178300 HEA 300 90,10 12 m 1081,2178360 HEA 360 114,20 12 m 1370,4

178400 HEA 400 127,50 12 m 1530,0178450 HEA 450 142,80 12 m 1713,6

178500 HEA 500 158,10 12 m 1897,2178600 HEA 600 181,60 12 m 2179,2178700 HEA 700 209,00 12 m 2508,0

178800 HEA 800 228,50 12 m 2742,0178920 HEA 1000 277,00 12 m 3324,0

Steel beams HEA S355G11+N/Macc. to NORSOK M-120 Rev. 4 MDS Y26 Rev. 3 and acc. to EN 10 225.Tolerances acc. to EN 10 034. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Chargenumber in both ends.Marking: Aluminium ends.+blue stroke.

ARTICLE GROUP 45

Article no. Profile no. Kg/m Lengths Kg/length

45102 HEB 100 20,80 12 m 249,645122 HEB 120 27,20 12 m 326,445125 HEB 120 27,20 15 m 408,045142 HEB 140 34,40 12 m 412,845145 HEB 140 34,40 15 m 516,045162 HEB 160 43,50 12 m 522,045165 HEB 160 43,50 15 m 652,545182 HEB 180 52,20 12 m 626,445185 HEB 180 52,20 15 m 783,045186 HEB 180 52,20 20 m 1044,0

45202 HEB 200 62,50 12 m 750,045205 HEB 200 62,50 15 m 937,545206 HEB 200 62,50 20 m 1250,045222 HEB 220 72,90 12 m 874,845225 HEB 220 72,90 15 m 1093,545226 HEB 220 72,90 20 m 1458,045242 HEB 240 84,90 12 m 1018,845245 HEB 240 84,90 15 m 1273,545246 HEB 240 84,90 20 m 1698,045262 HEB 260 94,90 12 m 1138,845265 HEB 260 94,90 15 m 1423,545266 HEB 260 94,90 20 m 1898,045281 HEB 280 105,10 24 m 2522,445282 HEB 280 105,10 12 m 1261,245285 HEB 280 105,10 15 m 1576,5

45301 HEB 300 119,30 24 m 2863,245302 HEB 300 119,30 12 m 1431,645305 HEB 300 119,30 15 m 1789,545321 HEB 320 129,50 24 m 3108,045322 HEB 320 129,50 12 m 1554,045325 HEB 320 129,50 15 m 1942,545341 HEB 340 136,70 24 m 3280,845342 HEB 340 136,70 12 m 1640,445345 HEB 340 136,70 15 m 2050,545361 HEB 360 144,80 24 m 3475,245362 HEB 360 144,80 12 m 1737,645365 HEB 360 144,80 15 m 2172,0

45401 HEB 400 158,10 24 m 3794,445402 HEB 400 158,10 12 m 1897,245405 HEB 400 158,10 15 m 2371,545451 HEB 450 174,40 24 m 4185,645455 HEB 450 174,40 15 m 2616,0

45501 HEB 500 190,70 24 m 4576,845505 HEB 500 190,70 15 m 2860,5

45601 HEB 600 216,20 24 m 5188,8

Steel beams HEB S355J2G4acc. to EN 10 025(NORSOK M-120 Rev. 4 MDS Y05 Rev. 2 with control).Tolerances acc. to EN 10 034. Length tolerances acc. to +/- 100 mm.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

Page 25: Steel Sections

www.norskstaal.no 23

ARTICLE GROUP 233

Article no. Dimension Kg/m Lengths

233300 30 X 30 X 3,00 mm 2,43 6 m

233310 40 X 40 X 3,00 mm 3,38 6 m233320 40 X 40 X 4,00 mm 4,30 6 m

233330 50 X 50 X 3,00 mm 4,35 6 m233340 50 X 50 X 4,00 mm 5,58 6 m233342 50 X 50 X 4,00 mm 5,58 12 m233350 50 X 50 X 5,00 mm 6,54 6 m233352 50 X 50 X 5,00 mm 6,54 12 m

233360 60 X 60 X 3,00 mm 5,32 6 m

Cold formed hollow sectionsHybox S355/S355J2Hacc. to EN 10 219-1, unoiled.(NORSOK M-120 Rev. 4-MDS Y04 Rev.1)Impact tested at -20 gr. C.Tolerances acc. to EN 10 219-2.Length tolerances -0/+ 50 mmInspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

2323

STEEL

ARTICLE GROUP 180

Article no. Profile no. Kg/m Lengths Kg/length

180100 HEB 100 20,80 12 m 249,6180120 HEB 120 27,20 12 m 326,4180140 HEB 140 34,40 12 m 412,8180160 HEB 160 43,50 12 m 522,0180180 HEB 180 52,20 12 m 626,4

180200 HEB 200 62,50 12 m 750,0180220 HEB 220 72,90 12 m 874,8180240 HEB 240 84,90 12 m 1018,8180260 HEB 260 94,90 12 m 1138,8180280 HEB 280 105,10 12 m 1261,2

180300 HEB 300 119,30 12 m 1431,6180320 HEB 320 129,50 12 m 1554,0180340 HEB 340 136,70 12 m 1640,4180360 HEB 360 144,80 12 m 1737,6

180400 HEB 400 158,10 12 m 1897,2180450 HEB 450 174,40 12 m 2092,8

180500 HEB 500 190,70 12 m 2288,4180550 HEB 550 203,00 12 m 2436,0

180600 HEB 600 216,20 12 m 2594,4180650 HEB 650 229,50 12 m 2754,0

180700 HEB 700 245,80 12 m 2949,6

180800 HEB 800 267,20 12 m 3206,4

180920 HEB 1000 320,30 12 m 3843,6

Steel beams HEB S355G11+N/Macc. to NORSOK M-120 Rev. 4 MDS Y26 Rev. 3 and acc. to EN 10 225.Tolerances acc. to EN 10 034. Length tolerances acc. to -0/+ 100 mm.Inspection certificate acc. toEN 10 204-3.1.B.Chargenumber in both ends.Marking: Aluminium ends+blue stroke.

ARTICLE GROUP 218

Article no. Dimension Kg/m Lengths

218032 88,9 X 5,0 mm 10,30 12 m218092 114,3 X 6,0 mm 16,03 12 m218132 139,7 X 5,0 mm 16,60 12 m218142 139,7 X 6,0 mm 19,78 12 m218152 139,7 X 8,0 mm 25,98 12 m218282 168,3 X 6,0 mm 24,02 12 m218292 168,3 X 8,0 mm 31,63 12 m218302 168,3 X 10,0 mm 39,04 12 m218332 193,7 X 6,0 mm 27,80 12 m218342 193,7 X 8,0 mm 36,60 12 m218352 193,7 X 10,0 mm 45,30 12 m218382 219,1 X 6,0 mm 31,53 12 m218392 219,1 X 8,0 mm 41,65 12 m218402 219,1 X 10,0 mm 51,57 12 m218412 219,1 X 12,5 mm 63,69 12 m218442 244,5 X 8,0 mm 46,70 12 m218472 273,0 X 6,0 mm 39,50 12 m218482 273,0 X 8,0 mm 52,28 12 m218492 273,0 X 10,0 mm 64,86 12 m218542 323,9 X 8,0 mm 62,32 12 m218552 323,9 X 10,0 mm 77,41 12 m218562 323,9 X 12,5 mm 95,99 12 m218612 355,6 X 6,0 mm 51,70 12 m

Welded circular hollow sectionsHybox S355/S355J2Hacc. to EN 10 219-1.(NORSOK M-120 Rev. 4-MDS Y04 Rev.1)Tolerances acc. to EN 10 219-2.Inspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

Page 26: Steel Sections

www.norskstaal.no242424

STEEL

Article no. Dimension Kg/m Lengths

233362 60 X 60 X 3,00 mm 5,32 12 m233370 60 X 60 X 4,00 mm 6,87 6 m233372 60 X 60 X 4,00 mm 6,87 12 m233380 60 X 60 X 5,00 mm 8,15 6 m233382 60 X 60 X 5,00 mm 8,15 12 m

233390 70 X 70 X 3,00 mm 6,28 6 m233400 70 X 70 X 4,00 mm 8,16 6 m233402 70 X 70 X 4,00 mm 8,16 12 m233410 70 X 70 X 5,00 mm 9,76 6 m233412 70 X 70 X 5,00 mm 9,76 12 m

233420 80 X 80 X 3,00 mm 7,24 6 m233422 80 X 80 X 3,00 mm 7,24 12 m233430 80 X 80 X 4,00 mm 9,44 6 m233432 80 X 80 X 4,00 mm 9,44 12 m233440 80 X 80 X 5,00 mm 11,37 6 m233442 80 X 80 X 5,00 mm 11,37 12 m233460 80 X 80 X 6,00 mm 13,46 10 m233462 80 X 80 X 6,00 mm 13,46 12 m

233470 90 X 90 X 4,00 mm 10,76 6 m233472 90 X 90 X 4,00 mm 10,76 12 m233482 90 X 90 X 5,00 mm 13,00 12 m

233490 100 X 100 X 3,00 mm 9,18 6 m233492 100 X 100 X 3,00 mm 9,18 12 m233500 100 X 100 X 4,00 mm 11,98 6 m233502 100 X 100 X 4,00 mm 11,98 12 m233512 100 X 100 X 5,00 mm 14,54 12 m233520 100 X 100 X 6,00 mm 17,34 10 m233522 100 X 100 X 6,00 mm 17,34 12 m233540 100 X 100 X 8,00 mm 21,92 10 m233542 100 X 100 X 8,00 mm 21,92 12 m

233552 120 X 120 X 5,00 mm 17,82 12 m233572 120 X 120 X 8,00 mm 27,04 12 m233582 120 X 120 X 10,00 mm 31,84 12 m

233592 140 X 140 X 5,00 mm 20,69 12 m

233602 150 X 150 X 5,00 mm 22,64 12 m233632 150 X 150 X 8,00 mm 34,72 12 m233642 150 X 150 X 10,00 mm 42,30 12 m

233682 200 X 200 X 10,00 mm 58,38 12 m

233702 250 X 250 X 8,00 mm 60,53 12 m233712 250 X 250 X 10,00 mm 74,46 12 m

233722 300 X 300 X 8,00 mm 73,33 12 m233732 300 X 300 X 10,00 mm 90,54 12 m233742 300 X 300 X 12,00 mm 106,10 12 m

233780 100 X 100 X 10,00 mm 26,11 10 m233782 100 X 100 X 10,00 mm 26,11 12 m

233792 120 X 120 X 4,00 mm 14,48 12 m233802 120 X 120 X 6,00 mm 21,11 12 m

233812 140 X 140 X 6,00 mm 24,52 12 m233822 140 X 140 X 8,00 mm 31,43 12 m233832 140 X 140 X 10,00 mm 38,12 12 m

Article no. Dimension Kg/m Lengths

233842 150 X 150 X 6,00 mm 26,93 12 m

233843 160 X 160 X 5,00 mm 23,83 12 m233852 160 X 160 X 6,00 mm 28,29 12 m233862 160 X 160 X 8,00 mm 36,46 12 m233872 160 X 160 X 10,00 mm 44,40 12 m

233882 180 X 180 X 6,00 mm 32,74 12 m233892 180 X 180 X 8,00 mm 42,33 12 m233902 180 X 180 X 10,00 mm 51,71 12 m

233912 200 X 200 X 5,00 mm 30,70 12 m233922 200 X 200 X 6,00 mm 36,52 12 m233932 200 X 200 X 8,00 mm 47,43 12 m233942 200 X 200 X 12,00 mm 67,32 12 m

233972 250 X 250 X 6,00 mm 46,10 12 m233982 250 X 250 X 12,00 mm 86,50 12 m

ARTICLE GROUP 236

Article no. Dimension Kg/m Lengths

236320 50 X 30 X 3,00 mm 3,38 6 m236330 50 X 30 X 4,00 mm 4,30 6 m

236340 60 X 40 X 3,00 mm 4,35 6 m236350 60 X 40 X 4,00 mm 5,58 6 m236352 60 X 40 X 4,00 mm 5,58 12 m

236360 70 X 40 X 3,00 mm 4,73 6 m

236380 80 X 40 X 3,00 mm 5,32 6 m236390 80 X 40 X 4,00 mm 6,87 6 m236392 80 X 40 X 4,00 mm 6,87 12 m236402 80 X 40 X 5,00 mm 8,13 12 m236420 80 X 50 X 4,00 mm 7,28 6 m236430 80 X 50 X 5,00 mm 8,76 6 m236440 80 X 60 X 5,00 mm 9,57 6 m

236450 90 X 50 X 4,00 mm 8,16 6 m

236460 100 X 40 X 3,00 mm 6,28 6 m236465 100 X 40 X 4,00 mm 8,13 6 m236470 100 X 50 X 3,00 mm 6,76 6 m236472 100 X 50 X 3,00 mm 6,76 12 m236480 100 X 50 X 4,00 mm 8,80 6 m236482 100 X 50 X 4,00 mm 8,80 12 m236490 100 X 50 X 5,00 mm 10,76 6 m236492 100 X 50 X 5,00 mm 10,76 12 m236502 100 X 50 X 6,00 mm 12,55 12 m236512 100 X 60 X 4,00 mm 9,44 12 m236522 100 X 60 X 5,00 mm 11,37 12 m236752 100 X 60 X 6,00 mm 13,46 12 m

Cold formed hollow sectionsHybox S355/S355J2Hacc. to EN 10 219-1, unoiled.(NORSOK M-120 Rev. 4-MDS Y04 Rev.1)Impact tested at -20 gr. C.Tolerances acc. to EN 10 219-2.Length tolerances -0/+ 50 mmInspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

Page 27: Steel Sections

www.norskstaal.no 25

Article no. Dimension Kg/m Lengths Kg/lgd

52157 60 X 60 X 8,00 mm 13,06 12,1 m 158,0

52177 70 X 70 X 5,00 mm 10,30 12,1 m 124,6

52197 80 X 80 X 3,60 mm 8,76 12,1 m 106,052207 80 X 80 X 5,00 mm 11,90 12,1 m 144,052217 80 X 80 X 6,30 mm 14,70 12,1 m 177,952227 80 X 80 X 8,00 mm 18,20 12,1 m 220,2

52247 90 X 90 X 5,00 mm 13,60 12,1 m 164,652257 90 X 90 X 6,30 mm 16,70 12,1 m 202,152267 100 X 100 X 4,00 mm 12,20 12,1 m 147,652277 100 X 100 X 5,00 mm 15,10 12,1 m 182,752287 100 X 100 X 6,30 mm 18,80 12,1 m 227,552297 100 X 100 X 8,00 mm 23,40 12,1 m 283,152307 100 X 100 X 10,00 mm 28,50 12,1 m 344,9

52317 120 X 120 X 5,00 mm 18,40 12,1 m 222,652327 120 X 120 X 6,30 mm 22,70 12,1 m 274,752337 120 X 120 X 8,00 mm 28,50 12,1 m 344,952347 120 X 120 X 10,00 mm 34,90 12,1 m 422,3

52357 140 X 140 X 5,00 mm 21,50 12,1 m 260,252367 140 X 140 X 6,30 mm 26,80 12,1 m 324,352377 140 X 140 X 8,00 mm 33,60 12,1 m 406,652387 140 X 140 X 10,00 mm 41,20 12,1 m 498,5

52397 150 X 150 X 5,00 mm 23,20 12,1 m 280,752407 150 X 150 X 6,30 mm 28,90 12,1 m 349,752417 150 X 150 X 8,00 mm 36,10 12,1 m 436,852427 150 X 150 X 10,00 mm 44,50 12,1 m 538,552432 150 X 150 X 12,50 mm 54,50 12,1 m 659,5

52467 160 X 160 X 6,30 mm 30,30 12,1 m 366,652477 160 X 160 X 8,00 mm 37,90 12,1 m 458,652487 160 X 160 X 10,00 mm 46,70 12,1 m 565,1

52607 180 X 180 X 6,30 mm 34,90 12,1 m 422,352617 180 X 180 X 8,00 mm 43,90 12,1 m 531,252627 180 X 180 X 10,00 mm 54,10 12,1 m 654,652632 180 X 180 X 12,50 mm 65,70 12,1 m 795,0

52637 200 X 200 X 6,30 mm 39,00 12,1 m 471,952647 200 X 200 X 8,00 mm 49,00 12,1 m 592,952657 200 X 200 X 10,00 mm 60,50 12,1 m 732,152667 200 X 200 X 12,50 mm 74,50 12,1 m 901,552672 200 X 200 X 16,00 mm 93,30 12,1 m 1128,9

52677 250 X 250 X 6,30 mm 49,10 12,1 m 594,152687 250 X 250 X 8,00 mm 61,70 12,1 m 746,652697 250 X 250 X 10,00 mm 76,50 12,1 m 925,752707 250 X 250 X 12,50 mm 94,50 12,1 m 1143,552712 250 X 250 X 16,00 mm 119,34 12,1 m 1444,0

52717 300 X 300 X 10,00 mm 92,50 12,1 m 1119,352727 300 X 300 X 12,50 mm 114,00 12,1 m 1379,452817 300 X 300 X 16,00 mm 144,84 12,1 m 1752,6

52737 350 X 350 X 10,00 mm 108,00 12,1 m 1306,852747 350 X 350 X 12,50 mm 135,00 12,1 m 1633,5

52752 400 X 400 X 10,00 mm 124,50 12,1 m 1506,552777 400 X 400 X 12,50 mm 155,00 12,1 m 1875,552787 400 X 400 X 16,00 mm 195,80 12,1 m 2369,2

25 2525

STEEL

Article no. Dimension Kg/m Lengths

ARTICLE GROUP 52

Article no. Dimension Kg/m Lengths Kg/lgd

52087 40 X 40 X 4,00 mm 4,56 12,1 m 55,2

52097 50 X 50 X 3,20 mm 4,75 12,1 m 57,552107 50 X 50 X 4,00 mm 5,83 12,1 m 70,552117 50 X 50 X 5,00 mm 7,11 12,1 m 86,0

52127 60 X 60 X 3,20 mm 5,78 12,1 m 69,952137 60 X 60 X 4,00 mm 7,11 12,1 m 86,052147 60 X 60 X 5,00 mm 8,71 12,1 m 105,4

Hot formed hollow sectionsCelsius S355NHacc. to EN 10 210-1(NORSOK MDS 120, rev. 4 -MDS Y07 rev. 2).Tolerances acc. to EN 10 210-2.Length tolerances -0/+150 mm.C max. 0,16%, Ceq. max 0,41%.Outside corner radius 0,5 to 2,0 x t.Impact tested for thickness 6,3 mm and above:Min 40 Joule at -20 degr. C.Inspection certificate acc. to EN 10 204-3.1.B.MARKING: Aluminium ends.

236532 100 X 80 X 5,00 mm 13,01 12 m

236542 120 X 60 X 4,00 mm 10,76 12 m236552 120 X 60 X 5,00 mm 13,01 12 m236562 120 X 60 X 6,00 mm 15,40 12 m236982 120 X 80 X 4,00 mm 11,93 12 m236572 120 X 80 X 5,00 mm 14,54 12 m236582 120 X 80 X 6,00 mm 17,34 12 m236760 120 X 80 X 8,00 mm 23,40 10 m

236792 140 X 80 X 5,00 mm 15,98 12 m236902 140 X 80 X 6,00 mm 18,87 12 m

236612 150 X 100 X 5,00 mm 18,64 12 m236622 150 X 100 X 6,00 mm 22,13 12 m236642 150 X 100 X 8,00 mm 28,37 12 m

236652 160 X 80 X 5,00 mm 17,81 12 m236662 160 X 80 X 6,00 mm 21,11 12 m236672 160 X 80 X 8,00 mm 26,93 12 m

236722 200 X 100 X 5,00 mm 22,75 12 m236732 200 X 100 X 6,00 mm 26,93 12 m236822 200 X 100 X 8,00 mm 34,72 12 m236832 200 X 100 X 10,00 mm 42,30 12 m

236102 250 X 150 X 6,00 mm 36,52 12 m236852 250 X 150 X 8,00 mm 47,63 12 m236112 250 X 150 X 10,00 mm 58,14 12 m

236152 300 X 200 X 6,00 mm 46,10 12 m236162 300 X 200 X 8,00 mm 60,28 12 m236172 300 X 200 X 10,00 mm 74,15 12 m

236202 400 X 200 X 8,00 mm 73,03 12 m236212 400 X 200 X 10,00 mm 90,17 12 m236222 400 X 200 X 12,00 mm 106,08 12 m

Page 28: Steel Sections

www.norskstaal.no262626

STEEL

ARTICLE GROUP 53

Article no. Dimension Kg/m Lengths Kg/lgd

53047 60 X 40 X 4,00 mm 5,83 12,1 m 70,5

53077 80 X 40 X 4,00 mm 7,11 12,1 m 86,053087 80 X 40 X 6,30 mm 10,50 12,1 m 127,1

53097 90 X 50 X 3,60 mm 7,61 12,1 m 92,1

53117 100 X 50 X 3,20 mm 7,32 12,1 m 88,653127 100 X 50 X 4,00 mm 9,04 12,1 m 109,453137 100 X 50 X 5,00 mm 11,10 12,1 m 134,353147 100 X 50 X 6,30 mm 13,70 12,1 m 165,853151 100 X 50 X 8,00 mm 16,90 12,1 m 204,553167 100 X 60 X 5,00 mm 11,90 12,1 m 144,053177 100 X 60 X 6,30 mm 14,70 12,1 m 177,9

53207 120 X 60 X 5,00 mm 13,60 12,1 m 164,653217 120 X 60 X 6,30 mm 16,70 12,1 m 202,153227 120 X 80 X 5,00 mm 15,10 12,1 m 182,753237 120 X 80 X 6,30 mm 18,80 12,1 m 227,553247 120 X 80 X 8,00 mm 23,40 12,1 m 283,153257 120 X 80 X 10,00 mm 28,50 12,1 m 344,9

53297 150 X 100 X 5,00 mm 19,10 12,1 m 231,153307 150 X 100 X 6,30 mm 23,80 12,1 m 288,053317 150 X 100 X 8,00 mm 29,70 12,1 m 359,453327 150 X 100 X 10,00 mm 36,40 12,1 m 440,4

53347 160 X 80 X 5,00 mm 18,40 12,1 m 222,653357 160 X 80 X 6,30 mm 22,70 12,1 m 274,753367 160 X 80 X 8,00 mm 28,50 12,1 m 344,953377 160 X 80 X 10,00 mm 34,90 12,1 m 422,3

53407 200 X 100 X 5,00 mm 23,20 12,1 m 280,753417 200 X 100 X 6,30 mm 28,90 12,1 m 349,753427 200 X 100 X 8,00 mm 36,10 12,1 m 436,853437 200 X 100 X 10,00 mm 44,50 12,1 m 538,553447 200 X 100 X 12,50 mm 54,50 12,1 m 659,553467 200 X 120 X 6,30 mm 30,30 12,1 m 366,653477 200 X 120 X 8,00 mm 38,58 12,1 m 466,853487 200 X 120 X 10,00 mm 46,70 12,1 m 565,1

53687 250 X 150 X 6,30 mm 39,00 12,1 m 471,953697 250 X 150 X 8,00 mm 49,00 12,1 m 592,953707 250 X 150 X 10,00 mm 60,50 12,1 m 732,153717 250 X 150 X 12,50 mm 74,50 12,1 m 901,5

53727 300 X 200 X 6,30 mm 49,10 12,1 m 594,153737 300 X 200 X 8,00 mm 61,70 12,1 m 746,6

Hot formed hollow sectionsCelsius S355NHacc. to EN 10 210-1(NORSOK MDS 120, rev. 4 -MDS Y07 rev. 2).Tolerances acc. to EN 10 210-2.Length tolerances -0/+150 mm.C max. 0,16%, Ceq. max 0,41%.Outside corner radius 0,5 to 2,0 x t.Impact tested for thickness 6,3 mm and above:Min 40 Joule at -20 degr. C.Inspection certificate acc. to EN 10 204-3.1.B.MARKING: Aluminium ends.

Article no. Dimension Kg/m Lengths Kg/lgd

53747 300 X 200 X 10,00 mm 76,50 12,1 m 925,753757 300 X 200 X 12,50 mm 94,50 12,1 m 1143,553817 300 X 200 X 16,00 mm 119,30 12,1 m 1443,5

53767 400 X 200 X 10,00 mm 92,50 12,1 m 1119,353777 400 X 200 X 12,50 mm 114,00 12,1 m 1379,453827 400 X 200 X 16,00 mm 144,80 12,1 m 1752,0

53787 450 X 250 X 10,00 mm 108,00 12,1 m 1306,853797 450 X 250 X 12,50 mm 135,00 12,1 m 1633,5

ARTICLE GROUP 56

Article no. Dimension Kg/m Lengths Kg/lgd

56727 250 X 50 X 5,00 mm 23,55 12,1 m 285,00

Hot formed hollow sectionsacc. to EN 10 210-1.(NORSOK M-120 Rev. 4-MDS Y04 Rev.1)Tolerances acc. to EN 10 219-2.Length tolerances -0/+ 150 mmInspection certificate acc. to EN 10 204-3.1.B.Marking: Aluminium ends.

Hot formed hollow sectionsCelsius S355NHacc. to EN 10 210-1(NORSOK MDS 120, rev. 4 -MDS Y07 rev. 2).Tolerances acc. to EN 10 210-2.Length tolerances -0/+150 mm.C max. 0,16%, Ceq. max 0,41%.Outside corner radius 0,5 to 2,0 x t.Impact tested for thickness 6,3 mm and above:Min 40 Joule at -20 degr. C.Inspection certificate acc. to EN 10 204-3.1.B.MARKING: Aluminium ends.

ARTICLE GROUP 62

Article no. Dimension Kg/m Lengths Kg/lgd

62442 150 X 150 X 16 66,50 11,2 m 744,8

Page 29: Steel Sections

www.norskstaal.no 27

STEEL

Centerless rounds/shafts SS2142Cold drawn and oiled.Tolerances acc.to ISO h8 and DIN 670.Test report acc. to EN 10 204-2.2.

ARTICLE GROUP 246

Article no. Dimension Kg/m Lengths

246029 20 mm X Ø 2,51 6 m

246043 25 mm X Ø 3,93 6 m246050 30 mm X Ø 5,66 6 m246063 35 mm X Ø 7,70 6 m

246077 40 mm X Ø 10,10 6 m246084 45 mm X Ø 12,70 6 m

246091 50 mm X Ø 15,70 6 m

246105 60 mm X Ø 22,60 6 m246112 65 mm X Ø 26,60 6 m

246119 70 mm X Ø 30,80 6 m

246133 80 mm X Ø 40,20 6 m

246147 90 mm X Ø 50,90 6 m

246153 100 mm X Ø 62,90 6 m

246167 120 mm X Ø 90,50 6 m

Cold formed channels S235JRG2Acc to EN 10 025.Tolerances acc.to EN 10 048, 10 051 and 10 162

ARTICLE GROUP 203

Article no. Dimension Kg/m Lengths

203015 15 X 15 X 1,5 mm 0,48 6 m

203041 20 X 20 X 2,0 mm 0,85 6 m

203076 25 X 25 X 2,0 mm 1,09 6 m

203091 30 X 30 X 2,0 mm 1,34 6 m203095 30 X 30 X 3,0 mm 1,90 6 m

203146 40 X 20 X 2,0 mm 1,17 6 m203154 40 X 40 X 2,0 mm 1,82 6 m203162 40 X 40 X 3,0 mm 2,64 6 m

203186 50 X 30 X 3,0 mm 2,40 6 m203194 50 X 40 X 3,0 mm 2,88 6 m203202 50 X 50 X 3,0 mm 3,37 6 m203210 50 X 50 X 4,0 mm 4,39 6 m

203228 60 X 30 X 3,0 mm 2,64 6 m203236 60 X 40 X 3,0 mm 3,12 6 m

Article no. Dimension Kg/m Lengths

203244 70 X 30 X 3,0 mm 2,88 6 m203268 70 X 40 X 4,0 mm 4,37 6 m

203276 80 X 40 X 3,0 mm 3,59 6 m203291 80 X 40 X 4,0 mm 4,66 6 m203298 80 X 50 X 4,0 mm 5,27 6 m

203313 100 X 50 X 3,0 mm 4,55 6 m203321 100 X 50 X 4,0 mm 5,92 6 m203328 100 X 50 X 6,0 mm 8,56 6 m203344 100 X 60 X 6,0 mm 9,41 6 m

203388 120 X 50 X 4,0 mm 6,58 6 m203396 120 X 60 X 6,0 mm 10,50 6 m

203418 140 X 60 X 4,0 mm 7,85 6 m203426 140 X 60 X 6,0 mm 11,40 6 m

203452 160 X 50 X 4,0 mm 7,81 6 m203459 160 X 60 X 5,0 mm 10,40 6 m203466 160 X 60 X 6,0 mm 12,30 6 m

203491 180 X 60 X 5,0 mm 11,20 6 m

203512 200 X 80 X 6,0 mm 16,10 6 m

ARTICLE GROUP 201

Article no. Dimension Kg/m Lengths

201022 20 X 20 X 2 mm 0,58 6 m201036 25 X 25 X 2 mm 0,73 6 m201050 30 X 30 X 2 mm 0,91 6 m201057 40 X 20 X 2 mm 0,91 6 m201071 40 X 40 X 2 mm 1,22 6 m201099 40 X 40 X 3 mm 1,80 6 m201106 50 X 50 X 3 mm 2,26 6 m201113 50 X 30 X 3 mm 1,80 6 m201120 60 X 40 X 3 mm 2,26 6 m201130 70 X 70 X 5 mm 5,23 6 m201160 100 X 50 X 4 mm 4,59 6 m

Cold formed angles S235JRG2Acc to EN 10 025.Tolerances acc.to EN 10 048, 10 051 and 10 162

Page 30: Steel Sections

www.norskstaal.no282828

STEEL

ARTICLE GROUP 305

Article no. Dimension Kg/plate

305015 0,70 X 1000 X 2000 mm 11,20305018 0,70 X 1250 X 2500 mm 17,50

305022 0,90 X 1000 X 2000 mm 14,40305026 0,90 X 1250 X 2500 mm 22,50

305029 1,00 X 1000 X 2000 mm 16,00305034 1,00 X 1250 X 2500 mm 25,00

305036 1,25 X 1000 X 2000 mm 20,00305038 1,25 X 1250 X 2500 mm 31,30

305043 1,50 X 1000 X 2000 mm 24,00305045 1,50 X 1250 X 2500 mm 37,50

305050 2,00 X 1000 X 2000 mm 32,00305059 2,00 X 1250 X 2500 mm 50,00

Elektrolytic Zinc coated steel sheetsDC01+ZE 25/25AP.Acc. to EN 10 152.Chromated, zink coating min. 2,5 my on both sides.Tolerances acc. to EN 10 131.Test report acc. to EN 10 204-2.2.Delivered as singled sheets or in ab. 2000 kgs envelopes.

ARTICLE GROUP 288

Article no. Dimension Kg/plate

288015 0,50 X 1000 X 2000 mm 8,00

288029 0,70 X 1000 X 2000 mm 11,20288036 0,70 X 1250 X 2500 mm 17,50

288043 0,90 X 1000 X 2000 mm 14,40288050 0,90 X 1250 X 2500 mm 22,50

288057 1,00 X 1000 X 2000 mm 16,00288064 1,00 X 1250 X 2500 mm 25,00288068 1,00 X 1500 X 3000 mm 36,00

288070 1,25 X 990 X 2098 mm 20,77288071 1,25 X 1000 X 2000 mm 20,00288072 1,25 X 1048 X 2158 mm 22,62288077 1,25 X 1250 X 2158 mm 26,98288078 1,25 X 1250 X 2500 mm 31,30288079 1,25 X 1250 X 3000 mm 37,50288081 1,25 X 1500 X 3000 mm 45,00

288085 1,50 X 1000 X 2000 mm 24,00288088 1,50 X 1250 X 2000 mm 30,00288092 1,50 X 1250 X 2500 mm 37,50288099 1,50 X 1500 X 3000 mm 54,00

288120 2,00 X 1000 X 2000 mm 32,00288127 2,00 X 1250 X 2500 mm 50,00288131 2,00 X 1500 X 3000 mm 72,00

288134 2,50 X 1000 X 2000 mm 40,00288141 2,50 X 1250 X 2500 mm 62,50

288162 3,00 X 1000 X 2000 mm 48,00288169 3,00 X 1250 X 2500 mm 75,00288173 3,00 X 1500 X 3000 mm 108,00

Cold reduced steel sheet DC01AMacc to EN 10 130.Light oiled.Tolerances acc.to EN 10 131.Delivered as singled sheets or in ab. 2000 kgs envelopes.Test report acc. to EN 10 204-2.2.

ARTICLE GROUP 308

Article no. Dimension Kg/plate

308008 0,50 X 1000 X 2000 mm 8,00

308010 0,60 X 1000 X 2000 mm 9,60308011 0,60 X 1250 X 2000 mm 12,00308012 0,60 X 1250 X 2500 mm 15,00

308014 0,70 X 1250 X 2500 mm 17,50

Hot dipped Zinc coated steel sheetsDX51D+Z275. acc. to EN 10 142Zinc coating 275 gr/m2 on both sides.Tolerances acc.to EN 10 143.Delivered as singled sheets or in ab. 2000 kgs envelopes.Test report acc. to EN 10 204-2.2.

Article no. Dimension Kg/plate

308015 0,70 X 1250 X 2000 mm 14,00308016 0,70 X 1000 X 2000 mm 11,20308017 0,70 X 1500 X 3000 mm 25,20308019 0,70 X 1250 X 3000 mm 21,00

308028 0,90 X 1000 X 2000 mm 14,40

308031 0,90 X 1250 X 2000 mm 18,00308032 0,90 X 1250 X 3000 mm 27,00308033 0,90 X 1250 X 2500 mm 22,50308034 0,90 X 1500 X 3000 mm 32,40

308036 1,00 X 1000 X 2000 mm 16,00

308043 1,00 X 1250 X 2500 mm 25,00

308050 1,25 X 1000 X 2000 mm 20,00308055 1,25 X 1250 X 2000 mm 25,00308057 1,25 X 1250 X 2500 mm 31,30308059 1,25 X 1250 X 3000 mm 37,50

308061 1,50 X 1000 X 2000 mm 24,00308062 1,50 X 1250 X 2500 mm 37,50308063 1,50 X 1250 X 2000 mm 30,00

308078 2,00 X 1000 X 2000 mm 32,00308083 2,00 X 1250 X 2000 mm 40,00308085 2,00 X 1250 X 2500 mm 50,00

308092 2,50 X 1000 X 2000 mm 40,00308094 2,50 X 1250 X 2500 mm 62,50

308096 3,00 X 1000 X 2000 mm 48,00308099 3,00 X 1250 X 2500 mm 75,00

Page 31: Steel Sections

www.norskstaal.no 29

STEEL

Size StrandsMesh length Mesh width Total Open

x Size/ x hight areaExpamet Mesh width opening thickness mm approx % approxnr. mm mm mm approx Kg/stk. approx Kg/m2 Article no.

Small meshSteel/untreated 220 1220 x 1220 6 x 3,5 0,8 x 0,6 1,3 3,1 2,1 345180

Aluminium 602A 1250 x 1250 6 x 3,4 1,2 x 0,6 1,6 1,6 1,0 347040

1280F 2440 x 1220 25 x 7 2,4 x 1,1 10,8 57 3,7 3452702074F 1200 x 2000 40 x 19 4,6 x 2,6 18,2 60 7,6 345069

Flattened 2074F 1200 x 2400 40 x 19 4,6 x 2,6 21,7 60 7,6 345071Steel, untreated. 2490F (2489F) 1220 x 2440 47 x 15 6,6 x 4,3 45,2 53 15,2 345350

3394F 1220 x 2440 70 x 37 5,5 x 2,2 11,9 75 4,0 345110710F 1220 x 2440 70 x 38 4,7 x 2,7 14,7 75 4,9 345220

N6664F 1250 x 2500 8 x 6,5 1,4 x 0,7 8,1 49 2,6 3455000647F 1220 x 2440 35 x 12 2,3 x 1,2 8,6 71 2,9 345210

Flattened 2074F 1000 x 2000 40 x 19 4,6 x 2,6 16,8 60 8,4 345068Steel, 2074F 1200 x 2000 40 x 19 4,6 x 2,6 20,2 60 8,4 345070hot dipped 2074F 1200 x 2400 40 x 19 4,6 x 2,6 24,2 60 8,4 345074galvanized N7367FG 1200 x 2000 40 x 19 4,3 x 3,7 24,14 10,1 355560

N7367FG 1200 x 2400 40 x 19 4,3 x 3,7 29,00 10,1 3555701059F 2400 x 1200 76 x 34 6,0 x 4,5 39,7 67 13,8 345250

1196 2440 x 1220 28 x 9 2,0 x 1,2 3,6 11,6 3,9 3452601595 2440 x 1220 38 x 17 3,1 x 1,6 5,4 13,6 4,6 345038

Conventional 2091 2440 x 1220 50 x 22 2,5 x 2,5 5,2 13,1 4,4 345340light meshes 2498 2440 x 1220 60 x 25 3,1 x 3,0 6,4 18,7 6,3 345360Steel, untreated.

3092 1220 x 1830 76 x 33 3,6 x 3,0 7,0 11,1 5,0 3453903092 2440 x 1220 76 x 33 3,6 x 3,0 7,0 14,8 5,0 345400

Aluminium 2496A/164A 2500 x 1250 60 x 25 6,0 x 4,7 11,5 18,4 5,9 347060

1292 1220 x 1525 30 x 12 4,7 x 2,5 7,1 27,3 14,7 3452801576/0321 900 x 2000 38 x 17 4,8 x 3,0 6,3 23,8 13,2 3453001576/0321 1000 x 2000 38 x 17 4,8 x 3,0 6,3 26,4 13,2 3453051576/0321 1200 x 2000 38 x 17 4,8 x 3,0 6,3 31,7 13,2 3453101576/0321 1500 x 2000 38 x 17 4,8 x 3,0 6,3 39,6 13,2 3453152491 1000 x 2285 60 x 25 6,1 x 3,0 10,0 25,8 11,3 345051

Conventional 2491 1200 x 2285 60 x 25 6,1 x 3,0 10,0 31,0 11,3 345052heavy meshes 2491 1500 x 2285 60 x 25 6,1 x 3,0 10,0 38,7 11,3 345060(inkl. walk 2491 2000 x 2285 60 x 25 6,1 x 3,0 10,0 51,6 11,3 345063waygratings)Steel, untreated. 2492 (77) 1000 x 2000 60 x 25 6,1 x 4,5 11,5 34,0 17,0 345022

2492 (77) 1300 x 2000 60 x 25 6,1 x 4,5 11,5 44,2 17,0 3450252492 (77) 2440 x 2000 60 x 25 6,1 x 4,5 11,5 83,0 17,0 345026

4593 (72) 2440 x 2000 115 x 40 8,0 x 4,5 15,4 66,9 13,7 3450144593 (72) 1000 x 2000 115 x 40 8,0 x 4,5 15,4 27,4 13,7 3450154898 2440 x 1220 121 x 34 9,5 x 4,5 16,5 58,9 19,8 345440

Steel, hot dippedgalvanized 2492 (77) 1000 x 2000 60 x 25 6,1 x 4,5 11,5 37,4 18,7 345020

1)

3)

Expamet Expanded MetalFirst figure of zize indicates direction of meshExample sheet 2440 mm LW x 1220 mm SW or sheet1220 mm LW x 2440 mm LW denotes long way of mesh dimension. SW denotesshort way of mesh dimension.Mesh dimensions:For flattened meshes dimensions of aperture point to point inside the meshFor conventional meshes with angled dimensions from centre of knuckles

1) N6664F. (EXPERF), flattened with mesh opening like perforated sheets.Strandthickness= nominal thickness before flattening.

2) Typical for walkways.

3) Resevation for smaller deviation on meshzize and strands.

ARTICLE GROUP 345/347

STEE

LSHE

ETS

Page 32: Steel Sections

www.norskstaal.no30

STEEL

Article no. Size Mesh Load bearing bar Kg/pce Kg/m2

355100 6000 x 1000 mm S 41 x 100 mm 25 x 5 mm U 245,0 40,80355120 6000 x 1000 mm S 41 x 100 mm 30 x 5 mm U 274,0 45,60355130 6000 x 1000 mm S 41 x 100 mm 35 x 5 mm U 302,0 50,40355140 6000 x 1000 mm S 41 x 100 mm 50 x 5 mm U 351,6 58,60355150 6000 x 1000 mm S 41 x 100 mm 25 x 5 mm G 260,0 43,25355170 6000 x 1000 mm S 41 x 100 mm 30 x 5 mm G 290,0 48,30355180 6000 x 1000 mm S 41 x 100 mm 35 x 5 mm G 320,0 53,40355190 6000 x 1000 mm S 41 x 100 mm 50 x 5 mm G 419,0 69,80

Forge welded gratings Type S-Offshore («Norgesristen»)This S-type stops ball with 15 mm diameter acc. to security rule from the LabourInspectorate and Norwegian Petroleum Directorate.Serrated load bearing bars for improved grip and extra rounds between the load bearing bars.G= hot dip - galvanized (weight incl. galvanized.)U= Untreated (not galvanized).First figure of size indicates direction of load bearing bars.

ARTICLE GROUP 355

twisted cross bars

Serrated loadbearing bars

Extra rounds

Page 33: Steel Sections

www.norskstaal.no 31

Aluminium treadplatesEN AW 5052/5754 0/H111Inspection certificate acc. to EN 10 204-3.1.B.

ARTICLE GROUP 732

Article no. Dimension Kg/plate

732008 3 X 1000 X 3000 mm ONE BAR 27,00732011 3 X 1000 X 4000 mm ONE BAR 36,00732013 3 X 1250 X 2500 mm FIVE BAR 26,40

732014 3 X 1500 X 3000 mm FIVE BAR 38,00732015 4 X 1000 X 2000 mm ONE BAR 24,50732022 4 X 1000 X 4000 mm ONE BAR 49,00732024 4 X 1000 X 4000 mm FIVE BAR 49,00732026 4 X 1250 X 2500 mm FIVE BAR 36,40732028 4 X 1500 X 3000 mm FIVE BAR 52,50

732029 5 X 1000 X 2000 mm ONE BAR 29,50732036 5 X 1000 X 4000 mm ONE BAR 59,00732039 5 X 1000 X 4000 mm FIVE BAR 59,00732041 5 X 1250 X 2500 mm FIVE BAR 46,83732042 5 X 1500 X 3000 mm FIVE BAR 67,50

732043 6 X 1000 X 4000 mm ONE BAR 69,00732044 6 X 1000 X 4000 mm FIVE BAR 69,00

732050 7 X 1000 X 4000 mm ONE BAR 79,00

Aluminium ship-platesEN AW 5052/5754-H24/H34Inspection certificate acc. to DNV.

ARTICLE GROUP 733

Article no. Dimension Kg/plate

733008 4,00 X 2000 X 5000 mm 112,00733010 4,00 X 2000 X 6000 mm 134,40733015 5,00 X 2000 X 5000 mm 138,00733018 5,00 X 2000 X 6000 mm 165,50733022 6,00 X 2000 X 5000 mm 165,00733024 6,00 X 2000 X 6000 mm 198,00733029 7,00 X 2000 X 5000 mm 192,00733031 7,00 X 2000 X 6000 mm 230,40733036 8,00 X 2000 X 5000 mm 220,00733038 8,00 X 2000 X 6000 mm 264,00733043 10,00 X 2000 X 5000 mm 275,00733050 12,00 X 2000 X 5000 mm 330,00

ALUMINIUM

Aluminium sheets, platesEN AW 1050 A/1200-H14/H24From 8,0 mm temper. H111/0

ARTICLE GROUP 724

Article no. Dimension Kg/plate

724008 0,50 X 1000 X 2000 mm 2,80724019 0,70 X 1000 X 2000 mm 3,82

724036 1,00 X 1000 X 2000 mm 5,60724043 1,00 X 1250 X 2500 mm 8,75

724050 1,25 X 1000 X 2000 mm 7,00724057 1,25 X 1250 X 2500 mm 10,95

724071 1,50 X 1000 X 2000 mm 8,40724078 1,50 X 1250 X 2500 mm 13,13724090 1,50 X 1500 X 3000 mm 18,90

724092 2,00 X 1000 X 2000 mm 11,20724099 2,00 X 1250 X 2500 mm 17,30724110 2,00 X 1500 X 3000 mm 25,20

724113 2,50 X 1000 X 2000 mm 14,00724115 2,50 X 1250 X 2500 mm 21,88

724120 3,00 X 1000 X 2000 mm 16,80724127 3,00 X 1250 X 2500 mm 26,25

724134 4,00 X 1000 X 2000 mm 22,40724138 4,00 X 1250 X 2500 mm 35,00

724141 5,00 X 1000 X 2000 mm 28,00

724148 6,00 X 1000 X 2000 mm 33,60

724162 10,00 X 1000 X 2000 mm 56,00

VAREGRUPPE 731

Varenr. Dimensjon Kg/plate

731015 0,75 X 1000 X 2000 mm 4,20

731022 1,00 X 1000 X 2000 mm 5,60731036 1,00 X 1250 X 2500 mm 8,75731040 1,00 X 1500 X 3000 mm 12,60

731043 1,25 X 1000 X 2000 mm 7,00731050 1,25 X 1250 X 2500 mm 10,95731053 1,25 X 1500 X 3000 mm 15,75

731057 1,50 X 1000 X 2000 mm 8,40731059 1,50 X 1250 X 2500 mm 13,13731062 1,50 X 1500 X 3000 mm 18,90

731064 2,00 X 1000 X 2000 mm 11,20731065 2,00 X 1000 X 3000 mm 16,80731068 2,00 X 1250 X 2500 mm 17,50731078 2,00 X 1500 X 3000 mm 25,20

Aluminium sheets

ALUM

INIU

M

Page 34: Steel Sections

www.norskstaal.no323232

ALUMINIUM

ARTICLE GROUP 734

Article no. Dimension Kg/plate

734010 3 X 2000 X 5000 mm 84,00734016 4 X 2000 X 5000 mm 112,00734018 5 X 2000 X 5000 mm 138,00734023 6 X 2000 X 5000 mm 165,00734029 7 X 2000 X 5000 mm 192,00734033 8 X 2000 X 5000 mm 220,00734043 10 X 2000 X 5000 mm 275,00734053 12 X 2000 X 5000 mm 330,00734060 15 X 2000 X 5000 mm 413,00734070 20 X 2000 X 5000 mm 550,00734080 25 X 2000 X 5000 mm 687,00734090 30 X 2000 X 5000 mm 825,00

Aluminium ship-platesEN AW 5083 H116/H321Inspection certificate acc. to DNV.

ARTICLE GROUP 768

Article no. Dimension Kg/m

768005 30 X 2 mm 0,17768008 20 X 3 mm 0,17768015 25 X 3 mm 0,21768022 30 X 3 mm 0,26

768032 40 X 4 mm 0,45

768036 25 X 5 mm 0,35768043 30 X 5 mm 0,42768050 40 X 5 mm 0,56768057 50 X 5 mm 0,70768058 60 X 5 mm 0,84768060 100 X 5 mm 1,36

768061 25 X 6 mm 0,42768064 30 X 6 mm 0,51768071 40 X 6 mm 0,68768078 50 X 6 mm 0,84768085 60 X 6 mm 1,01768088 65 X 6 mm 1,10768092 75 X 6 mm 1,26768095 100 X 6 mm 1,62

768098 25 X 8 mm 0,56768099 30 X 8 mm 0,68768106 40 X 8 mm 0,90768113 50 X 8 mm 1,12768120 60 X 8 mm 1,35768127 75 X 8 mm 1,68768128 100 X 8 mm 2,24768130 120 X 8 mm 2,72

768132 40 X 10 mm 1,12768134 50 X 10 mm 1,40768141 60 X 10 mm 1,68768155 75 X 10 mm 2,10768162 100 X 10 mm 2,80768164 120 X 10 mm 3,36768169 150 X 10 mm 4,20768171 200 X 10 mm 5,60768173 250 X 10 mm 7,00

768176 100 X 12 mm 3,36768178 120 X 12 mm 4,04768182 150 X 12 mm 5,04

768184 60 X 15 mm 2,52768186 80 X 15 mm 3,36768189 100 X 15 mm 4,20768190 120 X 15 mm 5,04768191 200 X 15 mm 8,40768192 150 X 15 mm 6,30

768193 40 X 20 mm 2,24768194 50 X 20 mm 2,80768195 60 X 20 mm 3,35768197 100 X 20 mm 5,60768200 150 X 20 mm 8,40768250 200 X 20 mm 11,20

768300 60 X 30 mm 5,04

Aluminium flatbarsEN AW 6082-T6Inspection certificate acc. to NS-EN 10 204-3.1.BLengths: 5 m.

ARTICLE GROUP 712

Article no. Dimension Kg/m

712008 10 mm X Ø 0,21712013 12 mm X Ø 0,30712022 16 mm X Ø 0,55

712029 20 mm X Ø 0,86712043 25 mm X Ø 1,34

712050 30 mm X Ø 1,93

712071 40 mm X Ø 3,52712078 50 mm X Ø 5,50712085 60 mm X Ø 7,92712092 70 mm X Ø 10,78712099 80 mm X Ø 14,07

712113 100 mm X Ø 22,00712134 130 mm X Ø 37,15712150 150 mm X Ø 49,46712160 160 mm X Ø 56,30712170 170 mm X Ø 63,52

712180 180 mm X Ø 71,20712200 200 mm X Ø 88,00712220 220 mm X Ø 106,40

Aluminium round bars/shaftsEN AW 6082-T6Inspection certificate acc. to EN 10 204-3.1.B

Page 35: Steel Sections

www.norskstaal.no 3333 3333

ALUMINIUM

Aluminium T-sectionsEN AW 6082-T6Inspection certificate acc. to NS-EN 10 204-3.1.BLengths: 5 m.

ARTICLE GROUP 751

Article no. Dimension Kg/m

751029 30 X 30 X 3 mm 0,48751043 40 X 40 X 4 mm 0,86751048 50 X 50 X 5 mm 1,32751050 50 X 50 X 6 mm 1,59751071 60 X 60 X 6 mm 1,92

ARTICLE GROUP 771

Article no. Dimension Kg/m

771004 15 X 15 X 2 mm 0,16

771006 20 X 20 X 2 mm 0,22771008 20 X 20 X 3 mm 0,31

771015 25 X 25 X 3 mm 0,40

771029 30 X 30 X 3 mm 0,48771033 30 X 30 X 5 mm 0,78

771036 40 X 40 X 4 mm 0,86771043 40 X 40 X 5 mm 1,05

771057 50 X 50 X 5 mm 1,33

771064 50 X 50 X 6 mm 1,58

771088 60 X 60 X 6 mm 1,92

771092 65 X 65 X 6 mm 2,09771099 65 X 65 X 8 mm 2,74

771125 75 X 75 X 9 mm 3,56

771150 100 X 100 X 10 mm 5,32

Aluminium equal anglesEN AW 6082-T6Inspection certificate acc. to NS-EN 10 204-3.1.B Lengths: 5 m.

Aluminium channelsEN AW 6082-T6Inspection certificate acc. to NS-EN 10 204-3.1.B

ARTICLE GROUP 753

Article no. Dimension Kg/m

753021 20 X 20 X 20 X 2 mm 0,31753029 20 X 30 X 20 X 3 mm 0,54753036 30 X 40 X 30 X 3 mm 0,78753043 35 X 50 X 35 X 4 X 3 mm 1,16753044 35 X 90 X 35 X 3 X 4 mm 1,41753045 45 X 50 X 45 X 5 mm 1,81753050 40 X 75 X 40 X 5 X 4 mm 1,83753053 50 X 75 X 50 X 6 X 7 mm 2,92753057 50 X 100 X 50 X 8 X 6 mm 3,61753058 50 X 100 X 50 X 8 X 6 mm 3,61753060 60 X 140 X 60 X 7 X 7 mm 4,80753064 65 X 125 X 65 X 9 X 6 mm 5,08753065 65 X 125 X 65 X 9 X 6 mm 5,08753066 60 X 200 X 60 X 8 X 4,5 mm 5,00753080 100 X 200 X 100 X 5 mm 5,46

Page 36: Steel Sections

www.norskstaal.no343434

ALUMINIUM

Aluminium unequel anglesEN AW 6082-T6Inspection certificate acc. to NS-EN 10 204-3.1.B.Lengths: 5 m.

ARTICLE GROUP 772

Article no. Dimension Kg/m

772004 40 X 20 X 2 mm 0,31772006 40 X 25 X 2 mm 0,36

772008 50 X 40 X 5 mm 1,20772012 60 X 30 X 5 mm 1,20

772015 60 X 40 X 5 mm 1,31772022 65 X 50 X 6 mm 1,84

772029 75 X 50 X 6 mm 2,00772030 75 X 50 X 7 mm 2,32772032 75 X 50 X 8 mm 2,62

772036 100 X 50 X 6 mm 2,42772037 100 X 50 X 7 mm 2,81772038 100 X 50 X 8 mm 3,18772043 100 X 65 X 6 mm 2,69772046 100 X 65 X 8 mm 3,52772050 100 X 65 X 9 mm 3,94772055 100 X 75 X 8 mm 3,70

772057 125 X 75 X 9 mm 4,75

772058 130 X 65 X 8 mm 4,19772059 130 X 75 X 9 mm 4,94

772062 150 X 75 X 9 mm 5,45772064 150 X 100 X 10 mm 6,72

772100 200 X 100 X 10 mm 8,12

Aluminium-steel explosivewelded transition jointsUltrasonic inspected.Steel: SS 2134Aluminium: SS 4007Aluminium: SS 4140Inspection certificate acc. to NS-EN 10 204-3.3.B.Lenghts: 3,8 m.

ARTICLE GROUP 745

Article no. Dimension Kg/m

745030 28 X (20+3+10) 5,40

Page 37: Steel Sections

www.norskstaal.no 3535 3535

Structural steel in accordance to European standard (EN)

Principle Additional Additional symbolssymbols symbols for steel for steel products

G S n n n an ..…………....... + an + an ....…….. n = numericalan = alfanumercal

Principle symbols Additional symbols

Letter Mecanical Group 1 Group 2 For steel-properties products

G = nnn = min. for structural steel: Definitioncast yield strengthsteel Re (mpa) Impact toughness in Test

for the J (Joules) temp.smalestthickness- 27 J 40 J 60 J °C C = Special cold forming

S = range JR KR LR 20 D = Hot dip coatingstructural JO KO LO 0 E = Enamellingsteel J 2 K 2 L 2 –20 F = Forging*) J 3 K 3 L 3 –30 H = Hollow sections

J 4 K 4 L 4 –40 L = Low temperatureJ 5 K 5 L 5 –50 M = Thermomechanically rolledJ 6 K 6 L 6 –60 N = Normalized or

normalized rolledO = OffshoreP = Steel for sheet piling

M = thermomechanically rolled Q = Quenched and temperedN = normalized or S = ShipbuildingN = normalised rolled T = TubesQ = quenched and tempered W = Weather resistant

*) Other letters will be used for other steel qualities. Additional symbols will also change. Refer to EN 10 027-1 and EN 10 027-2 and circular IC 10 for additional information.

Example on quality designation in accordance to NS-EN 10 025.

S 235J2G3S: Structural steel235: Min. yield strength (mpa)J2: Impact toughness min. 27 J (-20°C)G3: Delivery condition:

Symbol G3 has different meaning for plates and profiles. The delivery condition forplates are normalized or normalized rolled. As for profiles, it is up to the producer todecide the delivery condition if nothing else has been agreed.

If it has been agreed that the delivery condition shall be normalized or normalized rolled,G3+N has to be stated on the profiles certificate.

Copyright.

35

TABLES - STEEL

EUROPEAN - STANDARD (EN)

TABL

ES

Page 38: Steel Sections

www.norskstaal.no363636

TABLES - STEEL

strength strength toughness 1) 1) 1) 1)

ReH Rm KV T 10113 12536 17 102 4360mpa mpa J oC 1993 12542

12546

275 370-510 40 -20 S275N St E 285275 370-510 27 -50 S275NL TStE285 40 EE

355 470-630 40 -20 S355N E355-DD01 St E 355 2134-01355 470-630 27 -50 S355NL E355-E01 TSt E 355 2135-01 50 EE

420 520-680 40 -20 S420N E420-DD01 St E420420 520-680 27 -50 S420NL E420-E01 TSt E420

460 550-720 40 -20 S460N E460-DD01 St E460460 550-720 27 -50 S460NL E460-E01 TSt E460 55 EE

275 360-510 40 -20 S275M275 360-510 27 -50 S275ML

355 450-610 40 -20 S355M St E355TM355 450-610 27 -50 S355ML TSt E355TM

420 500-660 40 -20 S420M St E420TM A 678B WELDOX 420420 500-660 27 -50 S420ML TSt E420TM

460 530-720 40 -20 S460M St E460TM A 852 WELDOX 460460 530-720 27 -50 S460ML TSt E460TM

strength strength toughness 1) 1) 1) 1)

ReH Rm KV T 10025 10025 17 100 4360mpa mpa J oC 1993 1991

185 290-510 S185 Fe310-0 St 33 1300-00

235 340-470 27 20 S235JR Fe 360 B St 37-2 1311-00 A 283 Gr.C235 340-470 27 20 S235JRGI Fe 360 BFU USt 37-2235 340-470 27 20 S235JRG2 Fe 360 BFN RSt 37-2 1312-00 40B A 284C NVA/NVE A/E DOMEX 240YP235 340-470 27 0 S235JO Fe 360C St 37-3U 40C A 36235 340-470 27 -20 S235J2G3 Fe 360 D1 St 37-3N 40D A 573-58235 340-470 27 -20 S235J2G4 Fe 360 D2 A 573-65

275 410-560 27 20 S275JR Fe 430 B St 44-2 1412-00 43B A 573-70 NVA 27275 410-560 27 0 S275JO Fe 430 C St 44-3 U 43C A 633A NVA 27275 410-560 27 -20 S275J2G3 Fe 430 D1 St 44-3 N 1414-00 43D275 410-560 27 -20 S275J2G4 Fe 430 D2 1414-01

355 490-630 27 20 S355JR Fe 510 B 2172-00 50B 0X524355 490-630 27 0 S355JO Fe 510 C St 52-3 U 50C A 633C355 490-630 27 -20 S355J2G3 Fe 510 D1 St 52-3 N 2174-01 50D A 572-50 NVD 36 DH 36 DOMEX 355 YPD

-40 NVE 36 EH 36355 490-630 27 -20 S355J2G4 Fe 510 D2 A 678 Gr.A355 490-630 40 -20 S355K2G3 Fe 510 DD1355 490-630 40 -20 S355K2G4 Fe 510 DD2

295 470-610 E295 Fe 490-2 St 50-2 1550-001550-01

335 570-710 E335 Fe 590-2 St 60-2 1650-001650-01

360 670-830 E360 Fe 690-2 St 70-2 1655-00

EN

10025

NON

ALLOYED

STEEL

EN

10113-2

NORMALIZED

FINE GRAIN

STEEL

EN

10113-3

THERMOME-

CHANICALLY

ROLLED

FINE GRAIN

STEEL

Tables:Compares new European standards and earlier national standards (the qualities are not directly comparable).Nearest corresponding ASTM-standards and DNV/Lloyds standards.Nearest corresponding standards.For guiding purposes a simplified extract of EN-standards where the thickness validity are t>= 3 mm for tensile strength andt<= 16 mm for yield strength. Data are non committal and are only guidelines. For complete data, please see the originalstandards.

Common European standard (EN)All EU and EFTA lands have committed themselves to implement as a national standard, and EN standard that is approved byqualified majority in the European standardisation organisation CEN. An approved EN-standard supersedes previous nationalstandards. As an example, quality S235JRG2 will have the same term in e.g. Norway, Sweden and UK with reference to thenational standards, NS-EN 10 025, SS-EN 10 025 and BS-EN 10 025.

Abbreviation:EN = Approved European standardNS-EN = Norwegian standardpr EN = Preliminary European standard

Norm Yield Tensile Impact NS-EN NS-EN DIN SS BS ASTM DNV Lloyds Brandnames

Norm Yield Tensile Impact NS-EN NS DIN SS BS ASTM DNV Lloyds Brandnames

Page 39: Steel Sections

www.norskstaal.no 37www.norskstaal.nowww.norskstaal.nowww.norskstaal.nowww.norskstaal.nowww.norskstaal.no37 37www.norskstaal.no

TABLES - STEEL

Norm Yield Tensile Impact NS-EN NS DIN SS BS NV NGS Brandnamesstrength strength toughness 10 219-1 1997 1) 1) 1) 1) 2)

Under 3mm/3mm og over

EN 10219-1 235 360-510/340-470 27 20 S235JRH 12120 St 37-2 1311-00 Strongbox 235NON 275 360-510/340-470 27 0 S275JOH 12143 St 44-3 U 34/23ALLOYED 275 430-580/410-560 27 -20 S275J2H 12143 St 44-3 N 1414-01STEEL 355 510-680/490-630 27 0 S355JOH 12153 St 52-3 U 43/36

355 510-680/490-630 27 -20 S355J2H 12153 St 52-3 N Hybox S355J2HEN 10219-1 275 370-540 40 -20 S275NH St E 285 NNORMALIZED 275 370-540 27 -50 S275NLH TSt E 285 NFINE GRAIN 355 470-630 40 -20 S 355NH St E 355 NSTEEL 355 470-630 27 -50 S355NLH TSt E355 N

460 550-720 40 -20 S460NH St E 460 N460 550-720 27 -50 S460NLH TSt E 460 N

EN 10219-1 275 360-510 40 -20 S275MHTHERMOME- 275 360-510 27 -50 S275MLHCHANICALLY 355 450-610 40 -20 S355MHROLLED 355 450-610 27 -50 S355MLHFINE GRAIN 420 500-660 40 -20 S420MHSTEEL 420 500-660 27 -50 S420MLH

460 550-720 40 -20 S460MH460 550-720 27 -50 S460MLH

Validity region for tensile values are given in the introduction on the opposite page.1) The standards have or will be replaced with the new EN-standards.2) Authority permission in Norway, Sweden and Finland. Approval have been given through NGS-NR (Nordic Advisory Committee for Pressure Vessel Steel)

Prepared by Norsk Stål AS. All rights reserved.

Norm Yield Tensile Impact NS-EN NS-EN DIN SS BS ASTM NV NGS Brandnamesstrength strength toughess 1) 1) 1) 1) 2)

ReH Rm KV T 10 028 17155 1501mpa mpa J oC 1993

235 360-480 27 0 P235GH HI 2) 1330-01 164-360 A 285 C 101 2)265 410-530 27 0 P265GH HII 2) 1431-01 164-400 A 299 201 2)295 460-580 27 0 P295GH 17Mn 4 2102-01355 510-650 27 0 P355GH 19Mn6 A 537 CI

EN 275 440-590 31 +20 16Mo3 16Mo3 2912-0110028-2 300 450-600 31 +20 13CrMo4-5 13CrMo44 2216-04LOW ALLOYED 310 480-630 31 +20 10CrMo9-10 10CrMo9-10 2218-04STEEL 310 520-670 31 +20 11CrMo9-10

NS-EN 1) DIN 1)10113-2 17102

275 390-510 40 -20 P275N S275N StE285 A 516-70275 390-510 40 -20 P275NH WSt E285275 390-510 34 -40 P275NL1 S275 SNL TSt E285 1432-01 A 662A275 390-510 30 -50 P275 NL2 SSt E285 A 662B

355 490-630 40 -20 P355N S355N St E355 A 737B355 490-630 40 -20 P355NH WSt E355 2106-01 NV4-2 1205 2) RAEX 385P 2)355 490-630 34 -40 P355NLI TSt E355 2107-01 Nv4-4L 1208 2)355 490-630 30 -50 P355 NL2 S355NL ESt E355 RAEX 386P ARCTIC 2)

460 570-720 40 -20 P460N St E460 A 737C460 570-720 40 -20 P460NH WSt E460 A 738B460 570-720 34 -40 P460NL1 TSt E460460 570-720 30 -50 P460NL2 ESt E460

Norm Yield Tensile Impact NS-EN NS-EN DIN SS BS ASTM NV NGS Brandnamesstrength strength toughess 1) 1) 1) 1) 2)

ReH Rm KV T 10 210 17100 4360mpa mpa J oC 1994 17123/4/5

235 340-470 27 +20 S235JRH NS12120 St 37-2 1311-00 A 283 Gr.C

275 410-560 27 0 S275JOH NS12143 St 44-3U 43C A 633A275 410-560 27 -20 S275J2H NS12143 St 44-3N 1414-01 43D Celsius S275J2H355 490-630 27 0 S355JOH NS12153 St 52-3U 50C A 633C355 490-630 27 -20 S355J2H NS12153 St 52-3N 50D A 572-50 Celsius S355J2H

275 370-540 40 -20 S275NH St E285N275 370-540 27 -50 S275NLH TSt E285N 43EE355 470-630 40 -20 S355NH St E355N Celsius S355NH355 470-630 27 -50 S355NLH TSt E355N 50EE Celsius S355NH(mod.)

460 550-720 40 -20 S460NH St E460N460 550-720 27 -50 S460NLH TSt E460N 55EE

EN

10028-2

NON

ALLOYED

STEEL

EN

10028-3

NORMALIZED

FINE GRAIN

STEEL

EN

10210-1

NON

ALLOYED

STEEL

EN 10210-1NORMALIZEDFINE GRAINSTEEL, NONALLOYED

EN 10210-1NORMALIZEDFINE GRAINSTEEL, LOWALLOYED

www.norskstaal.no 37

Page 40: Steel Sections

www.norskstaal.no383838

TABLES - STEELDesignation Chemical values - ladle analysis %

Norm/ Max. Max. Max. Max. Max. Max. Max. Max. Max. OtherQualityStandand C Mn P S Cr Si Cu V Mo elements Ceq

S235JR EN 10 025 0,17 1,40 0,045 0,045S235JRG2 EN 10 025 0,17 1,40 0,045 0,045 – – – – – – –DOMEX 240YPB/D DOMEX 0,12 0,8 0,030 0,025 – 0,03 – – – Al –NVA DNV *0,21 2,5 x C (min) 0,035 0,035 – – – – – * Profiles C=0,23 –NVE DNV 0,18 0,70 (min) 0,035 0,035 – – – – – Al –R St. 37-2 DIN 17 100SS 1312 SS 141312A 36 ASTM

S275J263 EN 10 025 0,18 1,50 0,035 0,035 – – – – – – –S275J2H EN 10 210 0,20 1,50 0,035 0,035 – – – – – – –P265 GH EN 10 028-2 0,20 0,5-1,40 0,030 0,025 0,30 0,40 0,30 0,02 0,08 Al –SA 516 GR.60 ASMEH II DIN 17 155E295 EN 10 025 – – 0,045 0,045 – – – – – – –SS1550 SS141550BS4360-43A BS 4360SS 1412 SS 14 1412SS 1430 SS 14 1430SS 1432 SS 14 1432

S355JO EN 10 025 0,20 1,60 0,040 0,040 0,55S355J2G3 EN 10 025 0,20 1,60 0,035 0,035 – 0,55 – – – – –S355J2G4 EN 10 025 0,20 1,60 0,035 0,035 – 0,55 – – – – –S355N EN 10 113-2 0,20 0,9-1,65 0,035 0,030 0,030 0,50 0,35 0,12 0,10 Al, Nb –DOMEX 355 MCD/E DOMEX (EN 10 149) 0,10 1,50 0,025 0,010 – 0,03 – – – Al, Nb,B,V –DOMEX 350W DOMEX 0,12 0,20-0,50 0,007- 0,15 – 0,30-1,25 0,25-0,75 0,25-0,55 – – Ni max 0,65 –S355J2H EN 10 210/EN 10 219 0,20 1,50 0,035 0,035 – – – – – – –S355NH EN 10 210 0,20 0,9-1,65 0,035 0,030 0,30 0,50 0,35 0,12 0,10 Fine grain treated –386 P ARCTIC RAEX 0,18 0,9-1,60 0,030 0,025 – 0,15-0,50 – 0,10 – (Nb+V+Ti) 0,41P 355 NLI EN 10 028-3 0,18 0,9-1,70 0,030 0,020 0,30 0,50 0,30 0,10 0,08 (Nb+V+Ti) 0,43NVD 36 DNV 0,18 0,9-1,60 0,035 0,035 0,20 0,10-0,50 0,35 0,05-0,10 0,08 Al, Nb –NVE 36 DNV 0,18 0,9-1,60 0,035 0,035 0,20 0,10-0,50 0,35 0,05-0,10 0,08 Al, Nb –E335 EN 10 025 – – 0,045 0,045 – – – – – – –NORSEC 360 NORSEC 0,14 1,45 0,025 0,010 0,20 0,45 0,30 – 0,07 Fine grain treated 0,40

NORSOK MDS EN 10 225rev. 3, Des. 00 Aug. 2001

Y20 S355G10+N EN 10 225 0,12 1,65 0,015 0,005 0,20 0,15-0,55 0,30 0,060 0,08 Al, Nb, Ti, NiY26 S355G11+N/M EN 10 225 0,14 1,65 0,025 0,015 0,25 0,55 0,30 0,060 0,08 Al, Nb, Ti, NiY28 S355G13+N (rev.1) EN 10 225 0,16 1,60 0,025 0,015 0,25 0,15-0,55 0,35 0,100 0,08 Al, Nb, Ti, NiY30 S420G2+M EN 10 225 0,14 1,65 0,025 0,015 0,25 0,15-0,55 0,35 0,100 0,08 Al, Nb, Ti, NiY50 S500G2+M MDS-Y50 0,14 1,65 0,020 0,007 0,25 0,15-0,55 0,30 0,080 0,25 Al, Nb, Ti, Ni

Fritenar 355 – 0,12 1,60 0,030 0,025 – 0,50 – – – – 0,39

E 360 EN 10 025 – – 0,045 0,045 – – – – – – –St. 52-3N DIN 17 100SS 2172 SS 14 21 72SS 2132 SS 14 21 32SS 2134 SS 14 21 34SS 1650 SS 14 16 50BS4360 50D BS 4360TSt.E 355 DIN 17 102

SS2142 OVAKO - Steel tubes 0,22 1,50 0,030 0,040 – 0,50 – – 0,010 AL –520M OVAKO - Steel tubes 0,18 1,50 0,040 0,045 – 0,55 – 0,09 – – 0,43280 OVAKO - Steel tubes 0,20 1,60 0,030 0,035 0,30 0,45 0,30 0,12 0,10 – 0,51

Cev typical/long formulaWELDOX 500 D/E WELDOX 0,17 1,70 0,020 0,020 – 0,55 – 0,12 – ≤ 50 mm CE 0,39WELDOX 700 D/E/F WELDOX (EN 10137) 0,20 1,60 0,020 0,010 0,70 0,60 0,30 0,09 0,70 7,1–20 mm CE 0,41WELDOX 900 D/E/F WELDOX (EN 10137) 0,20 1,60 0,020 0,010 0,70 0,50 0,30 0,06 0,70 – CE 0,56WELDOX 960 D/E WELDOX (EN 10137) 0,20 1,60 0,020 0,010 0,70 0,50 0,30 0,06 0,70 4–13 CE 0,56WELDOX 1100 E/F WELDOX 0,21 1,20 0,010 0,020 0,80 0,50 0,30 0,08 0,70 – CE 0,70

DOMEX 500MCD/E DOMEX (EN 10149) 0,10 1,60 0,025 0,010 – 0,30 – – – Al, Nb, V (Ti) –DOMEX 650MCD/E DOMEX (EN 10149) 0,10 2,00 0,025 0,010 – 0,30 – – – Al, Nb, V (Ti) –DOMEX 700MCD/E DOMEX (EN 10149) 0,10 2,10 0,025 0,010 – 0,30 – – – Al, Nb, V (Ti) –DOMEX 740XPD/E DOMEX 0,12 2,10 0,030 0,010 – 0,60 – – – Al, Nb, V (Ti) –

HARDOX 400 Tykk. 4–20 mm 0,14 1,60 0,025 0,010 0,30–0,50 0,70 – – 0,25HARDOX 400 Tykk. (20)–32 mm 0,18 1,60 0,025 0,010 0,50 0,70 – – 0,25 Quenced or quenced andHARDOX 500 Tykk. 4–13 mm 0,27 160 0,025 0,010 1,0 0,70 – – 0,25 temperedHARDOX 500 Tykk. (13)–26 mm 0,29 1,60 0,025 0,010 1,0 0,70 – – 0,30

34CrNiMO6 EN 10083–1 0,30–0,38 0,50–0,80 0,035 0,035 1,60–1,70 0,40 – – 0,15–0,30 Ni

Simplified extracts and characteristics of steel qualities and standards. The data are non committal and are only guidelines. For complete data, please see theoriginal standards.

Prepared by Norsk Stål AS. All rights reserved.

Page 41: Steel Sections

www.norskstaal.no 3939 3939

TABLES - STEEL

Simplified extract and characteristics of steel qualities and standards. The data are non committal and are only guidelines. For complete data, please see the originalstandards.

Prepared by Norsk Stål AS. All rights reserved.

Designation Mechanical values

Norm/ Min. Min.Impact toughness

OtherQuality Standard Re N/mm2 Rm N/mm2 A5 % °C J comments

S235JR EN 10 025 235 340-470 26 +20 27S235JRG2 EN 10 025 235 340-470 26 +20 27DOMEX 240YPB/D DOMEX 240 360-510 28 +20/-20 27 Very good coldformability

NVA DNV 235 400-520 22 +20 –NVE DNV 235 400-520 22 -40 27R St. 37-2 DIN 17 100 235 340-470SS 1312 SS 141312 220 360-460A 36 ASTM 250 400-550

S275J263 EN 10 025 275 410-560 22 -20 27S275J2H EN 10 210 275 410-560 22 -20 27P265 GH EN 10 028-2 265 410-530 23 0 27SA 516 GR.60 ASME 220 415-515 – – –H II DIN 17 155 265 410-530E295 EN 10 025 295 470-610 20 – –SS1550 SS141550 270 490-610BS4360-43A BS 4360 245 430-510SS 1412 SS 14 1412 260 430-530SS 1430 SS 14 1430 260 410-530SS 1432 SS 14 1432 260 410-530

S355JO EN 10 025 355 490-630 22 0 27S355J2G3 EN 10 025 355 490-630 22 -20 27S355J2G4 EN 10 025 355 490-630 22 -20 27S355N EN 10 113-2 355 470-630 22 -20 40DOMEX 355 MCD/E DOMEX (EN 10 149) 355 430-550 23 -20/-40 40/27 Very good coldformability

DOMEX 350W DOMEX 350 min. 480 24 – – Equivalent Cor-Ten AS355J2H EN 10 210 355 490-630 22 -20 27S355NH EN 10 210 355 470-630 22 -20 40386 P ARCTIC RAEX 355 490-620 22 -60 40P 355 NLI EN 10 028-3 355 490-630 22 -40 34NVD 36 DNV 355 490-620 21 -20 34NVE 36 DNV 355 490-620 21 -40 34E335 EN 10 025 335 570-710 16 – –NORSEC 360 NORSEC 360 490-630 22 -60 50 Hollow sections

NORSOK MDS EN 10 225rev. 3, Des. 00 Aug. 2001Y20S355G10+N EN 10 225 355 470-630 22 -440 50 Z 35 for t ≥ 25 mmY26S355G11+N/M EN 10 225 355 460-620 22 -40 * 50 * Test at -20°C for t ≤ 25 mmY28 S355G13+N (rev.1) EN 10 225 355 460-620 22 -40 50Y30 S420G2+M EN 10 225 420 500-660 19 -40 60 Z 35 for t ≥ 25 mmY50 S500G2+M MDS-Y50 500-580 600+750 17 -40 60 Z 35 for t ≥ 25 mm

Fritenar 355 Fritenar 355 490-600 23 -20/-40 70 Beams and ...................

E 360 EN 10 025 360 670-830 11 – –St. 52-3N DIN 17 100 355 490-630SS 2172 SS 14 21 72 310 470-590SS 2132 SS 14 21 32 350 470-630SS 2134 SS 14 21 34 350 470-630SS 1650 SS 14 16 50 310 590-710BS4360 50D BS 4360 355 490-620TSt.E 355 DIN 17 102 355 490-630

SS2142 OVAKO - Steel tubes 430 min. 600 25 – – Hot rolled520M OVAKO - Steel tubes 390 500-650 22 -20 27 Hot rolled 280 OVAKO - Steel tubes 470 min. 640 20 +20 27 Hot rolled

WELDOX 500 D/E WELDOX 500 570-720 16 -20/-40 40WELDOX 700 D/E/F WELDOX (EN 10 137) 700 780-930 14 -20/-40/-60 27 transverseWELDOX 900 D/E/F WELDOX (EN 10 137) 900 940-1100 12 -20/-40/-60 27 transverseWELDOX 960 D/E WELDOX (EN 10 137) 960 980-1150 12 -20/-40 27 transverseWELDOX 1100 E/F WELDOX 1100 1250-1500 10 -40/-60 27 transverse -60OC if agreed

DOMEX 500MCD/E DOMEX (EN 10 149) 500 550-700 18 -20/-40 40/27DOMEX 650MCD/E DOMEX (EN 10 149) 650 700-880 14 -20/-40 40/27 Very good coldformability

DOMEX 700MCD/E DOMEX (EN 10 149) 700 750-950 12 -20/-40 40/27DOMEX 740XPD/E DOMEX 740 min. 790 13 -20/-40 40/27

HARDOX 400 HARDOX - wear resistant ca. 1000 ca. 1250 10 (typical 20 mm) -40 45 (typical 20 mm) 370-430 HB, typical 400 HBHARDOX 400HARDOX 500 HARDOX - wear resistant ca. 1300 ca. 1550 -40 30 (typical 20 mm) 450-550 HB, typical 500 HBHARDOX 500

34CrNiMO6 EN 10 083-1 1000 1200-1400 9 EN 10 045* EN 10 045* * Stated on the sertificat

Page 42: Steel Sections

www.norskstaal.no40

TABLES - STEEL

Table 1: Material Data Sheets for Structural SteelMDS Rev. Standard Steel Grade Product Type Steel FormerNo. No. Quality designation

Level

EN 10025 S235JRG2 Plates and SectionsEN 10210 S235JRH Hot finished tubularsEN 10219 S235JRH Cold formed tubularsEN 10025 S275JR Plates and Sections

3 EN 10210 S275J0H Hot finished tubularsEN 10219 S275J0H Cold formed tubularsEN 10025 S355J0 Plates and Sections

1 EN 10210 S355J0H Hot finished tubularsEN 10219 S355J2H Cold formed tubulars

Y05 2 EN 10025 S355J2G3 Plates and sections IIIEN 10113 S355N/M Plates and sections III

Y06 2 EN 10225 S355G1+N Hot finished tubulars IIIY07 2 EN 10210 S355/NH Hot finished tubulars IIIY08 2 EN 10219 S355MLH Cold formed tubulars III

Y15 2 EN 10113 S420NL/ML Plates and sections IIIY16 2 EN 10219 S420MLH Cold formed tubulars III

Y20 4 EN 10225 S355G10+N/G10+M Plates I S355N4z/M4zY21 4 EN 10225 S355G12+N/G12+M Rolled Sections I S355N3z/M3zY22 4 EN 10225 S355G15+Q/G15+N Seamless Tubulars I S355Q3z/N3zY25 4 EN 10225 S355G9+N/G9+M Plates II S355N4/M4Y26 3 EN 10225 S355G11+N/G11+M Rolled Sections II S355N3/M3Y27 4 EN 10225 S355G14+Q/G14+N Seamless Tubulars II S355Q3/N3Y28 2 EN 10225 S355G13+N Welded Tubulars II

Y30 4 EN 10225 S420G2+Q/G2+M Plates I S420Q3z/M3zY31 4 EN 10225 S420G4+M Rolled Sections I S420M3zY32 4 EN 10225 S420G6+Q(mod) Seamless Tubulars I S420Q3 (z mod)Y35 4 EN 10225 S420G1+Q/G1+M Plates II S420Q3/M3Y36 4 EN 10225 S420G3+M Rolled Sections II S420M3Y37 4 EN 10225 S420G6+Q Seamless Tubulars II S420Q3

Y40 4 EN 10225 S460G2+Q/G2+M Plates I S460Q3z/M3zY41 4 EN 10225 S460G4+M Rolled Sections I S460M3zY42 4 EN 10225 S460G6+Q(mod) Seamless Tubulars I S460Q3 (z mod)Y45 4 EN 10225 S460G1+Q/G1+M Plates II S460Q3/M3Y46 4 EN 10225 S460G3+M Rolled Sections II S460M3Y47 4 EN 10225 S460G6+Q Seamless Tubulars II S460Q3

Y50 4 EN 10225 S500G2+Q/G2+M ¹) Plates I S500Q3z/M3z ¹)Y51 4 EN 10225 S500G4+M ¹) Rolled Sections I S500M3z ¹)Y52 4 EN 10225 S500G6+Q (mod) ¹) Seamless Tubulars I S500Q3 (z mod) ¹)Y55 4 EN 10225 S500G1+Q/G1+M ¹) Plates II S500Q3/M3 ¹)Y56 4 EN 10225 S500G3+M ¹) Rolled Sections II S500M3 ¹)Y57 4 EN 10225 S500G6+Q ¹) Seamless Tubulars II S500Q3 ¹)

Note ¹): This steel grade designation is not included in EN 10225All references in the MDS are to the relevant material standard unless otherwise specified.

Denne standard og etterfølgende standarder er forenklede utdrag av den originale NORSOK STANDARD M-120 Rev.4,Juni 2004.

Y02 IV

Y04 IV

IVY01 4

Norsk stål has discovered uncorrectness in the M-120, Rev. 4, 2004.Table 1 (Overview over MDS) shows Rev. no. 3 for MDS Y26.The correct rev. shall be no. 4. However the datasheet MDS Y26 itself shows the correct Rev. no.The uncorrectness we have discovered has been given to the publisher in charge of the NORSOK - committee.

Page 43: Steel Sections

www.norskstaal.no 414141

Slyngrensing og priming:(flg. NS-EN 10 238)

Standard renhetsgrad SA 2,5.Andre renhetsgrader etter avtale.

Priming med jernoksyd eller sinksilikatprimer er standard.

Tykkelse ihh til standard er 20 my ± 5my målt på glatt prøveplate.

Kapasitet:Platebredde max 3 600 mm Profilhøyde max 450 mm

Med variabel hastighet kan vi slyng-rense tynne plater og tynnvegget gods etter nærmere avtale.

Stangstål og bjelker leg- ges med riktig avstand for forskriftsmessig rensing og priming.

Forvarmekammeret fjernerfuktigheten på materialene og bringer overflatetempe- raturen til et nivå som sik- rer god tørking av prime- ren.

I slyngrensekabinen ren-ses ståloverflaten med stålsand.Rust, glødeskall og valsehud fjernes slik at en ren, ru ståloverflate skaper en god heft for pri- meren.

I malekabinen får stålet enshop-primer i henhold til kundens bestilling.

Ettertørking skjer i et kam-mer med avsug. Deretter kontroll og merking etter kundens spesifikasjoner.

Foliering

Overflatebeskyttelse av plater med plastfolie (polyetylen). Ensidig eller tosidig.

Vi kan foliebelegge alle plater opp til 4 mm tykkelse og maksimal bredde 1 500 mm.

80 my plastfolie som standard. Andre folietykkelser på forespørsel.

Rullebane Forvarmekammer Slyngrensekabin Malekabin Ettertørke

INFORMATION PRE-TREATMENT SERVICES

Shotblasting and priming:(according to NS-EN 10 238)

Standard preparation grade is SA 2.5.Other surface preparation by agreement.

Standard priming is with iron oxide or zincsilicate primer.

Thickness according to the standard is 20my ± 5 my measured on a smooth samplesheet.

Capacity:Max. plate with 3600 mmMax. profile height 450 mm

With a variable speed we can shotblast thinplates and thin-walled materials by specialagreement.

Roller conveyorSteel bars ad beams arepositioned at the properdistance for cleaning andpriming,

Preheating chamberThe preheating chamberremoves moisture for thesurface og the materials andraises the surfacetemperature to a level thatprovides drying of the primer.

Blasting unitIn the blasting unit thesurface of the steel is blastedwith steel sand. Rust andscale are removed to providea clean, rough steel surfacefor good adhesion of theprimer.

Painting cabinIn the painting cabin a shopprimer si applied to the steelaccording to the customer’sorder.

Final dryingFinal drying takes place in achamber with suction. Thematerials are inspected andlabelled thereafter accordingto the customer’sspecifications.

Flame and Plasma Cutting of PlatesAutoCad for programming.Oxygen and plasma cutting with numericallycontrolled machines.Strip cutting, profile cutting, splitting and beveling.

Cutting capasity

Oxygen cutting:Max. thickness is 200 mm. Max width is 4000 mm.

Dry plasma:Max. thickness is 35 mm, stainless steel andaluminium.

Underwater plasma: Thickness of 3-25 mm.

Max. width of 3000 mm. Carbon steel and stainless steel.

Skjæring av plater

AutoCad for programmering.Oksygen- og plasmaskjæring i numerisk styrte maskiner. Stripeskjæring, figurskjæring, deling og fuging.

Skjærekapasitet

Oksygenskjæring: Max 200 mm tykkelse* Max bredde 4 000 mm

Tørr-plasma:Max 35 mm tykkelse,rustfritt, syrefast, alumi- nium.

Undervannsplasma: Tykkelse 3 - 25 mm.Bredde max 3 000 mm. Karbonstål og rustfritt.

Kapping

Sirkelsag: Bjelker og store profiler.

Kapasitet:Største bredde: 1000 mm Største høyde: 500 mm Skråkapping: 0 - 500

Båndsag: Bjelker, rør og profiler.

Kapasitet: Største bredde 750 mmStørste høyde: 500 mm Skråkapping: 0-600

Automatkapping:

Båndsager: Automatisk framtrekk for serie-kapping og buntkapping. Kun rettkapp.

KapasitetStørste profil (firkant) 450 mm eller diameter (Ø) 450 mm.

Mengdekapping.

Sag for store serier med høy kapasitet og pre- sisjon, med utstyr for endebørsting og sponut- blåsing. Kapasitet 600 - 1100 enheter pr. time.

Toleranser ± 0,5 mm

Kapping av stål, rustfritt, aluminium og kobber.Rundt, kvadratisk og rektangulært. Største diam. 85 mm. Minste diam. 9 mm.

Rullebane

Rullebane

Børsting av skjære- kant

Vinkelangivelse

INFO

RMAT

ION

/OT

HER

SERV

ICES

Page 44: Steel Sections

www.norskstaal.no424242

Skjæring av plater

AutoCad for programmering.Oksygen- og plasmaskjæring i numerisk styrte maskiner. Stripeskjæring, figurskjæring, deling og fuging.

Skjærekapasitet

Oksygenskjæring: Max 200 mm tykkelse* Max bredde 4 000 mm

Tørr-plasma:Max 35 mm tykkelse,rustfritt, syrefast, alumi- nium.

Undervannsplasma: Tykkelse 3 - 25 mm.Bredde max 3 000 mm. Karbonstål og rustfritt.

Kapping

Sirkelsag: Bjelker og store profiler.

Kapasitet:Største bredde: 1000 mm Største høyde: 500 mm Skråkapping: 0 - 500

Båndsag: Bjelker, rør og profiler.

Kapasitet: Største bredde 750 mmStørste høyde: 500 mm Skråkapping: 0-600

Automatkapping:

Båndsager: Automatisk framtrekk for serie-kapping og buntkapping. Kun rettkapp.

KapasitetStørste profil (firkant) 450 mm eller diameter (Ø) 450 mm.

Mengdekapping.

Sag for store serier med høy kapasitet og pre- sisjon, med utstyr for endebørsting og sponut- blåsing. Kapasitet 600 - 1100 enheter pr. time.

Toleranser ± 0,5 mm

Kapping av stål, rustfritt, aluminium og kobber.Rundt, kvadratisk og rektangulært. Største diam. 85 mm. Minste diam. 9 mm.

Rullebane

Rullebane

Børsting av skjære- kant

Vinkelangivelse

INFORMATION PRE-TREATMENT SERVICES

Cutting

Disc saw: Beams and large profiles.

Capacity:Max. width: 1000 mmMax. height: 500 mmAngle profile cutting: 0–50°

Band saw: Beams, tubes and profiles.

Capacity: Max. width 750 mmMax. height: 500 mmAngle profile cutting: 0–60°

Automatic cutting

Band saws: Automatic feed for series cutting and

batch cutting. Straight cutting only.

CapacityMax. profile (square) 450 mm or diameter 450 mm.

Volume cuttingSaw for large series with high capacity andprecision, with equipment for end brushing and chipextraction. Capacity 600–1100 units per hour.

Tolerances ± 0,5 mm.

Cutting of steel, stainless, aluminium and copper.Round, square and rectangular. Max. diam. 85 mm.Min. diam. 9 mm.

Roller track

Angle indication

Brushingof cuttingedge

We can offer the followingoutsourced services:

• Profile welding

• Cold forming

• Induction and cold bending

• Curved plates and profiles

• Punching

• Perforation

• Galvanizing

Page 45: Steel Sections

www.norskstaal.no 434343

PRODUCT RANGE AND BRANDS

Product range

• Hot rolled steel plates

• Hot rolled steel bars

• Hot rolled steel channels,

I and H sections

• Hollow sections and tubes

(hot finished and cold formed)

• Bright steel

• Cold formed special products

• Sheets and coils (hot rolled, cold

rolled and coated products)

• Building and construction products

(reinforcement steel and special

products)

• Expanded metal,gratings and

perforated products

• Aluminium (plates, strip, bars and

special products)

• Metals

• Stainless steel (sheets, plates, coils,

bars, tubes and hollow sections)

Brands

• Hardox, Weldox, Celsius, Hybox,

Hoesch sheet piling, Rana girders,

Docol, Dogal, Prelack, Colorcoat,

Expamet

Page 46: Steel Sections

www.norskstaal.no444444

We are situated at the following locations:

BERGEN: Laksevågneset 12,N-5161 Laksevåg

Phone +47 55 94 75 00. Telefax +47 55 94 75 10

E-mail: [email protected]

HAUGESUND: Garpaskjærsveien 5, PB. 514, 5527 Haugesund.

Phone +47 52 73 82 00. Telefax +47 52 73 82 08

E-post: [email protected]

BRUMUNDDAL: Jemtlandsveien 1,PO.Box 333, N-2381 BrumunddalPhone +47 62 34 73 00. Telefax +47 62 34 73 10E-mail: [email protected]

OSLO: Professor Birkelands vei 25,PO.Box 45 Leirdal, N-1008 OsloPhone +47 23 17 58 00. Telefax +47 23 17 58 20E-mail: [email protected]

HORTEN: Tollbugata 1,PO.Box 214, N-3192 HortenPhone +47 33 03 29 00. Telefax +47 33 03 29 10E-mail: [email protected]

HHEEAADD OOFFFFIICCEE::

NNoorrsskk SSttååll AASSNNyyee VVaakkååss vveeii 8800

PPOO..BBooxx 112233,, NN--11337788 NNeessbbrruu,, NNoorrwwaayyPPhhoonnee ++4477 6666 8844 2288 0000

TTeelleeffaaxx:: ++4477 6666 8844 2288 8844EE--mmaaiill:: eexxppoorrtt@@nnoorrsskkssttaaaall..nnoo

ULSTEINVIK: Stålhaugen 5,N-6065 Ulsteinvik

Phone +47 70 01 83 50. Telefax +47 70 01 83 51

E-mail: [email protected]

HARSTAD: Margr. Jørgensens vei 1 B, N-9480 Harstad

Phone +47 77 00 23 50. Telefax +47 77 00 23 70

E-mail: [email protected]

BODØ: Klinkerveien 7,PO.Box 280, N-8001 Bodø

Phone +47 75 58 54 00. Telefax +47 75 58 54 07

E-mail: [email protected]

STAVANGER: Støperigaten 1, PO.Box 1614, Kjelvene,

N-4093 StavangerPhone +47 51 59 71 50. Telefax +47 51 59 71 60

E-mail: [email protected]

TRONDHEIM: Transittgaten 6, PO.Box 1068, N-7446 TrondheimPhone +47 73 80 57 50. Telefax +47 73 80 57 70E-mail: [email protected]

SARPSBORG: Alvimveien 54, PO.Box 330, N-1702 SarpsborgPhone +47 69 14 84 50. Telefax +47 69 14 84 70E-mail: [email protected]

Page 47: Steel Sections

www.norskstaal.no 45

NOTES

Page 48: Steel Sections

www.norskstaal.no46

NOTES

Page 49: Steel Sections

www.norskstaal.no 47

NOTES

Page 50: Steel Sections

www.norskstaal.no48

NOTES

Page 51: Steel Sections

www.norskstaal.no

Terms of Sale for Norsk Stål ASValid from September 1, 2001.1. ApplicationThese general terms of sale shall apply when the parties have accepted them, inwriting or in some other way. If these terms of sale apply to a delivery, any departuretherefrom shall be agreed in writing.

2. Offers and product information2.1 Unless otherwise stated, a written offer shall be binding provided it is accepted wit-hin 14 days of the date upon which the offer was made.2.2 Any illustrations, drawings or information about prices and technical details givenin catalogues, brochures or other advertising material are intended as guidelines.Such information shall only be binding if the contract refers to it specifically.2.3 The contract shall be regarded as having been entered into when the vendor hasconfirmed the order in writing or delivery has commenced. The order confirmationshall be regarded as binding unless the purchaser immediately informs the vendor ofany objections.2.4 The contract shall include all descriptions, certificates and documents necessaryfor the approval or maintenance of the product.

3. Quality3.1 Unless otherwise agreed the purchaser shall bear the risk and responsibility forensuring that all the technical data and the product in its entirety are suited to hisneeds. However, should the vendor be aware of such needs, he has an obligation toinform the purchaser if he knows, or should know, that the product is not suited to thepurchaser`s needs.3.2 The latest version of a given standard shall apply in its original and complete form.

4. Quantity4.1 Unless otherwise stated in the order, the order confirmation shall determinewhether the delivery is to be defined in terms of weight, units or length.4.2 In the case of indent business1, unless otherwise specifically agreed, the quantitydelivered may deviate from the order in accordance with normal practice in the sector.

5. Terms of trade5.1 The terms of trade shall be interpreted in accordance with the rules laid down bythe International Chamber of Trade (Incoterms) that were in force at the time thecontract was entered into.5.2 Any insurance shall be in accordance with these rules.

6. Terms of payment6.1 Should the vendor so request, the purchaser shall provide a satisfactoryguarantee of full payment at the time the contract is entered into.6.2 Any claim on the part of the purchaser that is based on insignificant deficienciesin the delivery shall not exempt him from making full payment.6.3 Should a claim be disputed, the purchaser shall not be entitled to set off paymentagainst other contracts.6.4 Should the time-limit for payment be exceeded, the purchaser shall pay interest onarrears of 1.5% per month.

7. InvoicingThe invoice shall be dated on the day the product is dispatched from the vendor’swarehouse. In the case of indent business, the invoice may be dated at the earliest onthe day risk is transferred pursuant to the agreed terms of trade.

8. Indent businessIn the case of indent business, if the purchaser does not provide the necessary spe-cifications within the agreed time-limit, the vendor shall be entitled, after giving priornotice, to terminate the contract and/or demand compensation for proven costs/lostprofit if the order cannot be filled by the plant concerned.

9. Vendor’s lienThe vendor shall have a lien on the delivered product until the amount due, includinginterest and costs, is paid in full. An acceptance shall not be regarded as payment untilthe amount has been paid in full.

10. Delivery time and transfer of risk10.1 The agreed terms of trade shall be interpreted pursuant to the Incoterms thatwere in force at the time the contract was entered into. Should no such delivery clau-ce have been specifically agreed, delivery shall be regarded as having taken place "exworks".10.2 Should the delivery time be defined as a certain period, the delivery period shallbe calculated from the date the contract was entered into.10.3 The vendor shall select the means of transport according to normal practice inthe sector.10.4 Should the purchaser order any changes or additional work, the delivery periodmay be extended to cover the time needed for preparation and completion of the workconcerned.

11. Delay11.1 Should the vendor or the purchaser find that he is unable to deliver, or respect-ively accept, the product on the agreed date, or should a delay appear likely, he shallso inform the other party immediately and at the same time inform him of the dateupon which the delivery can be completed.Should a delivery (or partial delivery) be delayed for reasons that may be ascribed to thevendor and lead to a delay after the vendor has understood, or should have understood,that this will be of significant disadvantage to the purchaser, the purchaser may, bymeans of a written notification to the vendor, terminate the contract with respect to thedelayed goods. If the vendor has given notice of the delay, the purchaser shall exercisehis right of termination as soon as possible. If he does not do so, the date of deliverygiven in the notification shall be regarded as the new agreed delivery date.

11.2 The purchaser may not terminate the contract if the vendor is not entitled toterminate the contract with the supplier with whom the order has been placed. Thisprovision shall apply provided that the purchaser has been notified in writing wherethe order has been placed and has been informed about the limitation on his right toterminate the contract.11.3 In cases where, in the opinion of the purchaser, the delivery date is so importantthat a delay may have financial consequences for him, compensation or liquidateddamages shall be specifically agreed.

12. Grounds for exemption (force majeure)12.1 The following events shall be regarded as grounds for exemption if they preventfulfilment of the contract or will make fulfilment of the contract unreasonably difficult;labour disputes and any other circumstances over which the parties have no control,for example fire, war, mobilisation or unforeseen military call-ups of similar scope,requisition, confiscation, currency restrictions, riot and disturbance, scarcity of trans-port, ordinary scarcity of materials, limitations on fuel supplies, or deficiencies in supp-lies from sub-contractors or delays in such supplies as a result of one of the eventslisted in this subsection.Should any of the above events have commenced before the contract was enteredinto, it shall only be grounds for exemption if its effect on the fulfilment of the contractcould not have been anticipated at the time.12.2 Should either party wish to invoke any of the grounds listed in subsection 12.1,he shall inform the other party, without delay and in writing, when the event occurs andwhen it ceases.In the case of force majeure invoked by the purchaser, the purchaser shall cover thevendor’s costs in connection with safeguarding and protecting the product.12.3 Regardless of what may otherwise be agreed in these terms of sale, either partymay terminate the contract by so informing the other party in writing if he will beunable to fulfil the contract for more than six months due to one of the events specifi-ed in subsection 12.1.

13. Cancellation13.1 The purchaser shall be entitled to cancel the order provided that the vendor isable to cancel the order with his supplier. Should the purchaser cancel the order forthe product and/or services, he shall pay all costs associated with the cancellation andshall compensate the vendor`s loss of profit and other direct and proven losses suffe-red by the vendor.13.2 An order for product in stock may only be cancelled without cost if this can bedone at no disadvantage or cost to the vendor.

14. Obligation to inspect the product, claims14.1 The purchaser has a general obligation to inspect the product in accordance withnormal practice in the sector.14.2 Any deficiencies in the product shall be reported and a claim shall be submittedin writing, giving details of the type and extent of the deficiencies, as soon as possibleafter the product has been received or, if the deficiency is discovered later, or shouldhave been discovered, at the latest within a year after the product has been received.Any deficiencies in the product arising from damage during transport shall, however,be reported and a claim shall be submitted immedlately, also directly to the transportcompany, and according to the prescribed procedure for the type of transportconcerned.14.3 Unless the purchaser submits his claim in accordance with the above, he shallforfeit all rights to claim for the deficiency.14.4 All claims relating to certificates shall be presented immedlately after receivingthe certificate.

15. Deficient deliveries15.1 Should there be any deficiencies in the product or the work, the vendor shall havea choice between rectifying the deficiency or making a new delivery.15.2 The right to claim for deficiencies shall be forfeit if the deficiency is rectified byanyone other than the vendor without the latter`s written approval unless a delaywould lead to further damage.15.3 If the vendor rectifies the deficiency within a reasonable period of time, thepurchaser shall not be entitled to cancel the order. Any claim for cancellation of theorder shall be submitted in writing as soon as it has been confirmed that the deficien-cy will not or cannot be rectified.15.4 The vendor shall in no case be liable for damages over and above the value ofthe invoice. The vendor shall have no liability for damage or loss that the purchasermay suffer as a result of using the product, nor any other consequential liability.

16. Returned product16.1 The product may only be returned subject to prior agreement between thepurchaser and the vendor. If the product is returned for reasons that cannot beattributed to the vendor, the costs of returning the product shall be deducted from thecredit note.16.2 Products may only be returned provided that they are undamaged and, in thecase of products in factory packaging, provided that the packaging is original andundamaged.

17. Terms of sale for indent businessIf terms over and above these terms of sale are to apply to indent business, suchterms shall be specifically agreed.

18. DisputesAll offers for sale are based on Norwegian law. In case of litigation, the parties agreethat such litigation shall take place at the vendor’s venue and the original Norwegiantext of this document shall apply.

Page 52: Steel Sections