sterner area & roadway wingate brochure 1974

Upload: alan-masters

Post on 05-Apr-2018

229 views

Category:

Documents


0 download

TRANSCRIPT

  • 8/2/2019 Sterner Area & Roadway Wingate Brochure 1974

    1/6

    Sterner Lighting Systems arearoadwaymallwalkway

    Wingate

  • 8/2/2019 Sterner Area & Roadway Wingate Brochure 1974

    2/6

  • 8/2/2019 Sterner Area & Roadway Wingate Brochure 1974

    3/6

    8allas'

    Socket"Grip-T'le" porcelainTOP MOUNT

    WTSID E M OUN TWS

    ---It-- Pol.OPTIONALWINGATEREFRACTORS

    HORIZONTAL VERTICAL

  • 8/2/2019 Sterner Area & Roadway Wingate Brochure 1974

    4/6

    DimensionsRecommendedLuminaire MountingWattage Diameter Height

    WINGATE 100 up to 18 /J 7'-6" to 15'100 watts

    WINGATE 400 up to 12 '~6 /J to 30'400 watts 24 /J

    WINGATE 1000 up to 30" 25' to 40'1000 watts

    Photometric FlexibilityWattage ranges from 100 to 1000 watts, either in incandescent or high-lntensity discharge lamps. The WINGATEsystem makes the most out of available wattage: light that" might normally be lost is re-directed downward bythe reflectors to a specific ground pattern. Clear enclosures allow maximum transmission of light. Glass refrac-tors are available options to fit your lighting requirements, in IES type Il, III, IV, and 11-4-way distributions.(Photometric tables for precise fixture and mounting height selections are found in SECTION 14, TechnicalInformation.) The WINGATE is designed and manufactured to meet or exceed U.L. and N.E.C. specifications. Allfixtures bear the I.B.EW. label.

    Options clear butyrate enclosures. glass refractors. luminaires can be mounted from the top or side. can be wall-mounted. photoelectric control. single or duplex weatherproof receptacle. finishes available in a wide rangeof electrostatically-applied colors. pole materials: steel, aluminum, concrete, wood, wood-laid. pole cross-sections: square, round, hexagonal, octagonal. pole profiles: straight or tapered, depending on luminaire size(For specific details, see SECTION 8, Poles) WOODLITE styles available (See SECTION 11, WOODLlTE).

    Mounting Arrangements3@900

    Single

    2@ 1800 3@ 1200 4@9002@900

  • 8/2/2019 Sterner Area & Roadway Wingate Brochure 1974

    5/6

    ORDERING INFORMATION:Obtain the catalog number for the luminaire series which fits your requirements. Select, in sequence,a code for each feature from those listed in the format illustrated below.EXAMPLE: WS 18

    NOTE AF - Clear Smooth Acrylic(standard)H - Clear Smooth ButyrateNOTEB10 - Single28 - 2@180o29-2@90o32 -3@120o39 -3@90o49-4@90oNOTECV2 - Vertical GlassRefractor (IES Type II)V3 - Vertical GlassRefractor (IES TypeIII)V6 - Vertical GlassRefractor (IES Type11- 4 Way)H2 - Horizontal Glass

    Refractor (IES Type II)

    F 10 V3 175

    SPECIFYLAMPWATTAGENOTE 120D 208240

    H3 - Horizontal GlassRefractor (IES TypeIII)H4 - Horizontal GlassRefractor (IES TypeIV)(Vertical glass refractorsare available only for the18" and 24" luminaires,Horizontal glass refractorsare available only for the30" luminaire.)P - Photoelectric ControlN - Options Not DesiredNOTEDM - Mercury VaporH - Metal HalideS - High Pressure Sodium(consult factory)I - IncandescentNOTEEObtain color codes fromanodic or paint color chartsin SECTION 14.

    H POLE:

    NOTE Wind load ratingE table indicatesminimum polestrength,See SECTION8for pole selection.

    Wind Load Rating TableLumi- Luminaire Number &naire SpacingSize

    10 28 29 32 39 4918 2 3 3 4 4 424 3 5 5 6 6 730 4 7 7 9 9 10

    "Voltaqe Not Determined

  • 8/2/2019 Sterner Area & Roadway Wingate Brochure 1974

    6/6

    Sample Specification

    portents and 600-volt class socket. Socket to havenickel-plated current-carrying parts with lamp grip.Reflector shall be two die-formed aluminumsheets with polished Alzak finish; mounted oneither side of lamp to allow both vertical and hori-zontal changes in light output providing various IESdistribution patterns.The hemisphere acrylic plastic lens shall providemaximum transmission of light. Lenswill have threelatches and one hinge seating it against the housinggasket, providing protection against di rt and mois-ture.Arm assembly shall be a 3-inch square aluminumextrusion with round tenon to hold the luminaire, andcast aluminum pole plate with splice compartmentand cover.The lurnlnaire will bear the listing mark of Under-writers Lab.Fixtures suitable for use inwet locations.

    The luminaire housing shall be formed from a one-piece hemisphere spinning of sheet aluminum alloy6063. A circular internal flat aluminum plate iswelded to the housing for securing of reflectors andproviding cover over the ballast compartment. Ac-cess door provided to allow for wiring and accessto all ballast components.Aluminum slipfitter shall use 3 stainless steel setscrews for securing luminaire to armtenon; allow 3vertical adjustment. Finishon housing shall bebakedenamel. Ballast components, core and coil, capaci-tor, fused terminal block shall be mounted on analuminum plate and secured in a separate ballastcompartment. Ballast shall be capable of starting_________ type of lamp of wattsat voltage down to -20F. The 200C, 600-volt insulated wiring shall be installed between the600-volt insulated terminal block, the ballast com-

    STeRNeRLIGHTING SYSTEMS INCORPORATEDPrinted in U.S.A.

    Winsted, Minnesota 55395(612) 485-2141College Point (Long Island), NewYork 11356(212)358-5655