PROGRESS

STL3D PROGRESSMOST VERSATILE DIGITAL IMPRESSION DEVICE: CROWNS, BRIDGES, INLAYS, IMPLANTS

“Real progress happens only when the advantages of a new technology become available to everybody” - H. Ford.

PROGRESS

2

Scanner 3D Progress

FAST, ACCURATE ANDPORTABLE3D Progress is the ultimate solution for digital impression.

The Intra Oral scanner 3D PROGRESS acquires digital data in the oral cavity, directly reading the morphology of the tissues, without the use of spray opacizers.

3D Progress reduces the work time: in this way you will visit more patients and offer them more comfort.

The scanning procedure is very easy and intuitive: the handpiece is freely moved in the mouth without the need of a specific distance from the teeth. You can acquire by touching the surface of the tooth, or up to 2 cm away without losing information or decreasing the resolution of the final model.

3D progress is portable thanks to its weight of less than 700 grams; it is connected to a laptop via a USB cable and can be carried anywhere with absolute ease.

The 3D Progress system produces STL files compatible with all open CAD software. As the acquisition is done, the STL files can be sent directly to your lab.

2

PROGRESS

3

Digital Impression

3

PROGRESS

4

Scanner 3D Progress

INNOVATION OF DENTAL IMPRESSION

Accuratelow value of standard deviation.

FastThe acquisition time for half arch

is only 60 seconds.

Portableit is easy to carry: the device

weights only 700 grams.

4

PROGRESS

5

Digital Impression

INNOVATION OF DENTAL IMPRESSION

Versatilescans the oral cavity, plaster and

silicone impression.

OpenSTL files immediately available

without any annual fee.

Safe3D Progress is a medical device

class IIa (EC).

5

PROGRESS

6

Scanner 3D Progress

6

WORK FLOWThe 3D Progress full digital workflow makes collaboration between the dentist and the dental lab much easier.

1. Insert retraction cord 2. Remove retraction cord

Sending STL files directly to the laboratoryfor further processing.

Compatibility with all open CAD.

5. Send to the lab 6. CAD

Be sure that the margin line is visible.Wait for retraction time.

PROGRESS

STL

STL

Digital Impression

7

3. Planning

7. Crown production

4. Scan

Plan the scan before scanning.Lips and ceeks retractor use is suggested.

Scan the desired part and adjacent teeth.

Ensure precise fit.From digital to real crown.Compatibility with all open CAM system.

8. Cementation

PROGRESS

8

Scanner 3D Progress

8

TECHNOLOGYThe technology (and patents) of the 3D Progress system is the Confocal Microscopy combined with the detection of the effect Moiré. Thanks to the capabilities of the Smart Pixels sensor, the intraoral scanner is able to acquire 3D volumetric digital data of approximately 10 x 10 x 18mm (about the size of a tooth) in less than 1/10 second.

The average scanning speed is 10-20 scans per second. This very fast acquisition rate allows a real-time 3D acquisition, with a feeling very similar to a video camera rather than a traditional Dental scanner.

The special optic can reach the most remote and hidden areas of the oral cavity by simply changing the orientation of the scanner during the acquisition. Typically, you can capture a half arch in 60 seconds. The data collected are shown in real time on the computer screen and can be examined without touching the computer or using the mouse. Thanks to an internal accelerometer, the dentist will be able to rotate, move and zoom the scanned model with a simple movement of the scanner.

PROGRESS

9

Digital Impression

9

• Smart Sensor Pixel for fast and accurate acquisitions• Scanning of oral tissues without use of opacizers• Special optical system to reach the end of the jaws• Ability to stop/resume scanning• Real time automatic Stitching• No fog system

KEY POINTS

PROGRESS

10

Scanner 3D Progress

10

SOFTWARE 3D PROGRESSThe scanner 3D Progress gives to dentists and dental technicians an advanced system to manage the workflow from the digital impression to the production of the 3D model thanks to Model Creator1 add-on.The software is simple and intuitive: it suggests you the workflow for intraoral scanning with 3D Progress and allows you to export the STL files a few steps.

• Sound feedback during scanning• STL Accuracy, which gives you a high accuracy of the scanned surface• No more preparation errors thanks to Undercuts Control Technology (fig. 1)• STL immediately available• Possibility to integrate the Model Creator1 (fig. 2)• No annual license fees (optional updates available)• Digital scan of traditional impression (fig. 3)• Flipping digital scanning through 3D Progress software (Fig. 4), not to miss the digital workflow even in

more complex cases

1 Additional module purchased on request.

Fig. 1

Fig. 3 Fig. 4

Fig. 2

PROGRESS

11

Digital Impression

TECHNICAL DATA

ReccomendedPC features

Operating System Windows 7 (32/64 bit), Windows 8/8.1/10

CPU Intel i7 4710HQ a 3,5 GHz or higher

RAM 8 GB, suggested 16 GB

Graphic card NVIDIA GeForce with 2GB di RAM or higher

HDD 500 GB

USB ports 2.0-3.0

NET LAN and/or WLAN NET card

11

General Data

Scanning volume (object – X x Y x Z) 9.6mm x 10.4mm x 18mm

Scanning speed 10..28 scan for second

Sensor Pixel (X x Y) 144 x 90

Pixel size 50x86 μm

Acquisition data Points of cloud

File format STL

Power supply and technical data

Rated current 100-240 V, 50/60 Hz, 1.8-1.1A

Environment 10°C..30°C; 20%..90% RH

Dimensions 295 x 45 x 55 mm (LxAxP)

Weight 720g (without cable)

Temperature of scanning windows 42°C ± 2°C

USB 2.0 or 3.0

Standards

IEC 60601-1

IEC 60601-1-1

IEC 60601-1-2

IEC 60601-1-4

IEC 60825-1

PatentsUSA US 7,852,492 B2

Europe EP 2,051,042 B1

Canada CA 2,640,819 – 2,681,082

SpecificationsMedical device, class IIa, according to standard UE 2007/47

Device class 1, Type B, according to standard IEC 60601-1

Device class 3R, according to standard IEC 60825-1

Package

Handpiece (scanner)

Proper Power supply

Supporting base

Hardware User’s Manual

Software User’s Manual

100 disposable sheats

Power cable

USB 2.0 cable

MHT S.r.l. a socio unicoVia Enrico Fermi 22, 37135 Verona (VR) - ITALIA

P.IVA - VAT no. IT02299640231Tel. +39 045 6020842 | Fax +39 045 6020196 | info@mht.it

www.3dprogress.it

Follow us on:

The

desc

riptio

n an

d te

chni

cal d

ata

in th

is br

ochu

re is

inte

nded

for g

uida

nce

and

not b

indi

ng.

MHT

has

the

right

to m

ake

chan

ges w

ithou

t noti

ce.

Broc

hure

3D

Prog

ress

EN

G 02

/201

6 - R

EV 0

4

The MHT - High Medical Technologies project started in the 90s, with the aim of developing a technology to measure the color of teeth for restorative treatments, to give to the dental lab a system to produce a chromatically correct prosthesis, harmonized into the patient’s mouth. Today SpectroShade is considered the benchmark in cosmetic dentistry. In 2008 MHT starts the research for a new technology for Digital impressions, to replace the traditional impression and offer a fully digital approach to dental CAD CAM workflows.In 2012 started the production and market of the 3-D Intraoral Scanner 3D Progress, which meets the favor of the market for its unique features of portability, speed and precision. Furthermore it does not need opacifier powders for reading the tooth surface.

MHT factory is located in Verona, employing skilled personnel, capable of assembly and testing of optical components with the necessary expertise and competence. The technical support of MHT is fast and effective in managing all activities of after-sales, from training to service.

The company is certificated:

Our mission: “To create practices and protocols for modern dentistry; simpler processes and communications mean better results, greater patient satisfaction and reduced risks.”

www.mht.it