StoEnergy Guard™

Masonry Veneer on CMU BackupSeries 61c.xxJuly 2012

®

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp.All Rights Reserved.

Detail No.: 61c.01 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

Notes:

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Compatible Masonry Thru-Wall Flashing

Flashing Drip Edge set in Continuous Compatible Sealant

Weep Vent

StoEnergy Guard TM

Masonry Veneer on CMU Backup, Base of Wall

Masonry Veneer

1. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

3. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

2. Insulation type and location relative to assembly components to be determined by qualified professional.

4. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

5. Thru-Wall Flashing Type to be

determined by qualified professional

CMU Backup

Termination Bar w/ Cont. Compatible Sealant @ Top

Horizontal Joint Reinforcement & Wall Ties as Required

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 2 & 3)

Sto TurboStickTM or Sto ExtraSealTM (See Note 6)

6. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

Sto TurboStick.TM Install at localized areas of Sto Insul-XTM where excessive gaps exist at board joints & around masonry anchors as necessary

Detail No.: 61c.21 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

CMU Backup

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 5)

Termination Bar w/ Cont. Compatible Sealant @ Top

Compatible Masonry Thru-Wall Flashing

Flashing Drip Edge set in Continuous Compatible Sealant

StoEnergy Guard TM

Masonry Veneer on CMU Backup, Shelf Angle

Horizontal Joint Reinforcement & Wall Ties as Required

Adjustable Shelf Angle Anchored to Structure, w/ Horizontal Expansion Joint Below (see inset)

Horizontal Movement Joint at Underside of Structure

Masonry Veneer

Struct. Floor Line

Weep Vent

Horizontal Expansion Joint at Underside of Angle

Horizontal Movement Joint at Underside of Structure

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

2. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

6. Thru-Wall Flashing Type to be determined by qualified professional

5. For dynamic movement joints, joint treatment must be in compliance with the project’s specifications & details

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 5)

Sto TurboStickTM or Sto ExtraSealTM (See Note 7)

7. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 &4)

Sto TurboStick.TM Install at localized areas of Sto Insul-XTM where excessive gaps exist at board joints & around masonry anchors as necessary

Detail No.: 61c.21A Date: April 2013

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

CMU Backup

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 5)

Termination Bar w/ Cont. Compatible Sealant @ Top

Compatible Masonry Thru-Wall Flashing

Flashing Drip Edge set in Continuous Compatible Sealant

StoEnergy Guard TM

Masonry Veneer on CMU Backup, Shelf Angle w/ Stand-offs

Horizontal Joint Reinforcement & Wall Ties as Required

Shelf Angle w/ Stand-offs as per Design

Horizontal Movement Joint at Underside of Structure

Masonry Veneer

Struct. Floor Line

Weep Vent

Horizontal Expansion Joint at Underside of Offset Angle

Horizontal Movement Joint at Underside of Structure

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

2. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

6. Thru-Wall Flashing Type to be determined by qualified professional

5. For dynamic movement joints, joint treatment must be in compliance with the project’s specifications & details

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 5)

Sto TurboStickTM or Sto ExtraSealTM (See Note 7)

7. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 &4)

Sto TurboStick.TM Install at localized areas of Sto Insul-XTM where excessive gaps exist at board joints & around masonry anchors as necessary

Shelf Angle w/ Stand-offs as per Design

Detail No.: 61c.31A Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup Window Sill - Partial View Showing Terminations

StoGuard® Waterproof Air Barrier Membrane (See Note 3)

Masonry Veneer

IMPORTANT: Components not identified as Sto are

furnished by other manufacturers and are not

necessarily installed by trades who install the Sto

products. Refer to project specific contract documents.

Notes:

3. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

6. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

7. Thru-Wall Flashing Type to be determined by qualified professional.

1. StoGuard® Rough Opening Protection Options:

a. StoGuard® RapidSealTM (preferred)

b. Sto Gold Fill® with StoGuard® Mesh

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape

Wood Buck @ Rough Opening

StoGuard® Rough Opening Protection (See Note1)

Compatible Masonry Thru-Wall Flashing w/ End Dam Set in Cont. Sealant Below Masonry Sill (See Note 7)

StoGuard® Waterproof Air Barrier Membrane (See Note 3)

CMU Backup

Note: Thermally Broken Window System and Masonry Sill Not Shown for Clarity

Opt. Cavity Seal @ Jambs, Cont. Between Lintel & Sill Flashing

2. StoGuard® Transition Membrane Options:

a. StoGuard® RapidSealTM (with StoGuard® Mesh optional)

b. Sto Gold Fill® with StoGuard® Mesh (Topcoat with StoGuard® Waterproof Air Barrier Membrane)

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape (with StoGuard® Fabric shingle lapped for horizontal transitions)

Sto TurboStick.TM Install at localized areas of Sto Insul-XTM where excessive gaps exist at board joints & around masonry anchors as necessary

Sto TurboStickTM or Sto ExtraSealTM (See Note 8)

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 4 & 5)

StoGuard® Transition Membrane (See Note 2)

StoGuard® Rough Opening Protection (See Note1)

Horizontal Joint Reinforcement & Wall Ties as Required

8. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

5. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

4. Insulation type and location relative to assembly components to be determined by qualified professional.

Detail No.: 61c.31B Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup Window Sill

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Masonry Veneer

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

6. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

7. Thru-Wall Flashing Type to be determined by qualified professional

1. StoGuard® Rough Opening Protection Options:

a. StoGuard® RapidSealTM (preferred)

b. Sto Gold Fill® with StoGuard® Mesh

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape

Wood Buck @ Rough Opening

StoGuard® Rough Opening Protection (See Note1)

Compatible Masonry Thru-Wall Flashing w/ End Dam Set in Cont. Sealant Below Masonry Sill (See Note 7)

Thermally Broken Window System (See Note 8)

CMU Backup

Opt. Cavity Seal @ Jambs, Cont. Between Lintel & Sill Flashing

Sto TurboStick.TM Install at localized areas of Sto Insul-XTM where excessive gaps exist at board joints & around masonry anchors as necessary

Sto TurboStickTM or Sto ExtraSealTM (See Note 3)

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 4 & 5)

Masonry Sill w/ Weeps as Req’d

StoGuard® Rough Opening Protection (See Note1)

Horizontal Joint Reinforcement & Wall Ties as Required

8. Alignment of window thermal break relative to wall assembly thermal control layer to be determined by qualified professional.

5. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

4. Insulation type and location relative to assembly components to be determined by qualified professional.

3. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Detail No.: 61c.31C Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup Window Sill – Clarifying Views

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Masonry Veneer

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

5. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

6. Thru-Wall Flashing Type to be determined by qualified professional

1. StoGuard® Rough Opening Protection Options:

a. StoGuard® RapidSealTM (preferred)

b. Sto Gold Fill® with StoGuard® Mesh

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape

Wood Buck @ Rough Opening

Compatible Masonry Thru-Wall Flashing w/ End Dam Set in Cont. Sealant Below Masonry Sill (See Note 6)

Thermally Broken Window System (See Note 7)

CMU Backup

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 4 & 5)

Masonry Sill w/ Weeps as Req’d

StoGuard® Rough Opening Protection (See Note1)

7. Alignment of window thermal break relative to wall assembly thermal control layer to be determined by qualified professional.

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

Interior Air Seal, Cont. @ Perimeter of Thermally Broken Window

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 & 4)

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Wood Buck @ Rough Opening

Thermally Broken Window System (See Note 7)

StoGuard® Rough Opening Protection (See Note1)

Interior Air Seal, Cont. @ Perimeter of Thermally Broken Window

CMU Backup

Window Stool per Design

Detail No.: 61c.34 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup Window Jamb

Wood Buck @ Rough Opening

Compatible Masonry Thru-Wall Flashing w/ End Dam Set in Cont. Sealant Below Masonry Sill (See Note 7)

Thermally Broken Window System (See Note 3)

CMU Backup

Masonry Sill

Masonry Veneer

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

StoGuard® Rough Opening Protection (See Note 1)

Interior Air Seal, Continuous around Perimeter of Window

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

6. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

7. Thru-Wall Flashing Type to be

determined by qualified professional.

1. StoGuard® Rough Opening Protection Options:

a. StoGuard® RapidSealTM (preferred)

b. Sto Gold Fill® with StoGuard® Mesh

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape

3. Alignment of window thermal break relative to wall assembly thermal control layer to be determined by qualified professional

Note: Window Stool Not Shown for Clarity

Sto TurboStickTM or Sto ExtraSealTM (See Note 8)

8. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

5. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

4. Insulation type and location relative to assembly components to be determined by qualified professional.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 4 & 5)

Opt. Cavity Seal @ Jambs, Cont. Between Lintel & Sill Flashing

Interior Air Seal, Continuous around Perimeter of Window

Opt. Vertical Cavity Seal @ Jambs, Continuous Between Lintel & Sill Flashing

PLAN VIEW SHOWING INTERIOR AIR SEAL

Detail No.: 61c.35 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup Window Head

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

6. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

5. Insulation type and location relative to assembly components to be determined by qualified professional.

7. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

3. Thru-Wall Flashing Type to be determined by qualified professional

1. StoGuard® Rough Opening Protection Options:

a. StoGuard® RapidSealTM (preferred)

b. Sto Gold Fill® with StoGuard® Mesh

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape

4. Alignment of window thermal break relative to wall assembly thermal control layer to be determined by qualified professional

Wood Buck @ Rough Opening

StoGuard® Rough Opening Protection (See Note 1)

Compatible Masonry Thru-Wall Flashing w/ Preformed End Dam Set in Cont. Sealant (See Note 3)

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Thermally Broken Window System (See Note 4)

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

Masonry Veneer

Termination Bar w/ Continuous Compatible Sealant @ Top

Weep Vent

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Sto TurboStickTM or Sto ExtraSealTM (See Note 8)

Sto Insul-XTM XPS or Other Approved Continuous Insulation w/ Sloped Top Edge to Support Flashing (See Notes 5 & 6)

Interior Air Seal

Opt. Cavity Seal @ Jambs, Cont. Between Lintel & Sill Flashing

8. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

Detail No.: 61c.36 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup Window Head – Partial View Showing Terminations

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

6. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

7. Thru-Wall Flashing Type to be determined by qualified professional.

.

1. StoGuard® Rough Opening Protection Options:

a. StoGuard® RapidSealTM (preferred)

b. Sto Gold Fill® with StoGuard® Mesh

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape

3. Alignment of window thermal break relative to wall assembly thermal control layer to be determined by qualified professional

Wood Buck @ Rough Opening

StoGuard® Rough Opening Protection (See Note 1)

Compatible Masonry Thru-Wall Flashing w/ Preformed End Dam Set in Cont. Sealant (See Note 7)

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Thermally Broken Window System (See Note 3)

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

Note: Masonry Veneer Not Shown for Clarity

Termination Bar w/ Continuous Compatible Sealant @ Top

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

Termination Bar w/ Continuous Compatible Sealant @ Top

Compatible Masonry Thru-Wall Flashing w/ Preformed End Dam Set in Cont. Sealant (See Note 7)

CMU Backup

Wood Buck @ Rough Opening

Steel Lintel

StoGuard® Rough Opening Protection (See Note 1)

Sto Insul-XTM XPS or Other Approved Continuous Insulation w/ Sloped Top Edge to Support Flashing (See Notes 4 & 5)

Sto Insul-XTM XPS or Other Approved Continuous Insulation w/ Sloped Top Edge to Support Flashing (See Notes 4 & 5)

Opt. Cavity Seal @ Jambs, Cont. Between Lintel & Sill Flashing

Sto TurboStickTM or Sto ExtraSealTM (See Note 8)

8. As an alternative to Sto TurboStickTM or Sto ExtraSealTM to adhesively fasten Sto Insul-X,TM attach with sufficient cap/disc fasteners to secure prior to cladding attachment. Sto TurboStickTM or Sto ExtraSealTM when installed as vertical ribbons also function as a drainage space.

Sto TurboStickTM or Sto ExtraSealTM (See Note 8) 4. Insulation type and location relative to assembly components to be determined by qualified professional.

5. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

Detail No.: 61c.41 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

CMU Backup Wall to Concrete Column Interface – Restrained Joint

Masonry Veneer

Concrete Column

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

StoGuard® Transition Membrane (See Note 1)

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Transition Membrane Options:

a. StoGuard® RapidSealTM with StoGuard® Mesh

b. Sto Gold Fill® with StoGuard® Mesh (Topcoat with StoGuard® Waterproof Air Barrier Membrane)

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

d. StoGuard® Tape (with StoGuard® Fabric shingle lapped for horizontal transitions)

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

5. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 & 4)

Detail No.: 61c.42 Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

CMU Backup Wall to Concrete Column Interface – Movement Joint, Options A & B

Masonry Veneer

Concrete Column

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Backer Rod & Compatible Sealant

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Compressible Joint Filler

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Backer Rod

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Compressible Joint Filler

Concrete Column

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 5)

Masonry Veneer

OPTION A: SEALANT & BACKER ROD

OPTION B: PRECURED SILICONE SEALANT TAPE

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

3. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

2. Insulation type and location relative to assembly components to be determined by qualified professional.

4. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

5. For dynamic movement joints, joint

treatment must be in compliance with the project’s specifications & details

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 2 & 3)

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 2 & 3)

Detail No.: 61c.43A Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

CMU Backup Wall to Steel Column Interface – Restrained Joint, Option A

StoGuard® Transition Membrane (See Note 1)

Masonry Veneer

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

Strap Anchors Welded to Steel Column, Embedded in Grout for Composite Action

Structural Steel Column

StoGuard® Transition Membrane (See Note 1)

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Transition Membrane Options:

a. StoGuard® RapidSealTM with StoGuard® Mesh

b. Sto Gold Fill® with StoGuard® Mesh (Topcoat with StoGuard® Waterproof Air Barrier Membrane)

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

5. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

Light Gauge Steel Stud Framing

Sheathing (See Note 6)

6. Glass mat gypsum sheathing in compliance with ASTM C 1177, Typ.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 & 4)

Detail No.: 61c.43B Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

CMU Backup Wall to Steel Column Interface – Restrained Joint, Option B

Masonry Veneer

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

Structural Steel Column

Strap Anchors Welded to Steel Column, Embedded in Grout for Composite Action

StoGuard® Transition Membrane (See Note 1)

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Transition Membrane Options:

a. StoGuard® RapidSealTM with StoGuard® Mesh

b. Sto Gold Fill® with StoGuard® Mesh (Topcoat with StoGuard® Waterproof Air Barrier Membrane)

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

2. StoGuard® Waterproof Air Barrier

Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

5. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 & 4)

Detail No.: 61c.44A Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

IMPORTANT: Components not identified

as Sto are furnished by other

manufacturers and are not necessarily

installed by trades who install the Sto

products. Refer to project specific

contract documents.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

Notes:

StoEnergy Guard TM

CMU Backup Wall to Steel Column Interface – Movement Joint, Option A

Masonry Veneer

StoGuard® Waterproof Air Barrier Membrane (See Note 2)

CMU Backup w/ Horizontal Joint Reinforcement, Wall Ties, & Column Anchors as Required

Structural Steel Column w/ Adjustable Masonry Anchors

Backer Rod & Compatible Sealant for Continuous Air Seal

2. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

4. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

3. Insulation type and location relative to assembly components to be determined by qualified professional.

5. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

6. For dynamic movement joints, joint

treatment must be in compliance with the project’s specifications & details

Light Gauge Steel Stud Framing

Sheathing (See Note 7)

7. Glass mat gypsum sheathing in compliance with ASTM C 1177, Typ.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 3 & 4)

StoGuard® Transition Membrane (See Note 1)

1. StoGuard® Transition Membrane Options:

a. StoGuard® RapidSealTM with StoGuard® Mesh

b. Sto Gold Fill® with StoGuard® Mesh (Topcoat with StoGuard® Waterproof Air Barrier Membrane)

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

Detail No.: 61c.44B Date: July 2012

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

CMU Backup Wall to Steel Column Interface – Movement Joint, Option B

Masonry Veneer

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

CMU Backup w/ Horizontal Joint Reinforcement & Wall Ties as Required

Structural Steel Column

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

3. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

2. Insulation type and location relative to assembly components to be determined by qualified professional.

4. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 2 & 3)

5. For dynamic movement joints, joint treatment must be in compliance with the project’s specifications & details.

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 5)

Backer Rod

Detail No.: 61c.81 Date: May 2013

ATTENTION

Sto products are intended for use by qualified professional contractors, not consumers, as a component of a larger construction assembly as specified by a qualified design professional, general contractor or

builder. They should be installed in accordance with those specifications and Sto’s instructions. Sto Corp. disclaims all, and assumes no, liability for on-site inspections, for its products applied improperly, or

by unqualified persons or entities, or as part of an improperly designed or constructed building, for the nonperformance of adjacent building components or assemblies, of for other construction activities

beyond Sto’s control. Improper use of Sto products or use as part of an improperly designed or constructed larger assembly or building may result in serious damage to Sto products, and to the structure of the

building or its components.

STO CORP. DISCLAIMS ALL WARRANTIES EXPRESSED OR IMPLIED EXCEPT FOR EXPLICIT LIMITED WRITTEN WARRANTIES ISSUED TO AND ACCEPTED BY BUILDING OWNERS IN

ACCORDANCE WITH STO’S WARRANTY PROGRAMS WHICH ARE SUBJECT TO CHANGE FROM TIME TO TIME. For the fullest, most current information on proper application, clean-up, mixing and

other specifications and warranties, cautions and disclaimers, please refer to the Sto Corp. website, www.stocorp.com.

www.stocorp.com

Property of Sto Corp. All Rights Reserved.

StoEnergy Guard TM

Masonry Veneer on CMU Backup, Roof to Wall Parapet

IMPORTANT: Components not identified as

Sto are furnished by other manufacturers

and are not necessarily installed by trades

who install the Sto products. Refer to

project specific contract documents.

Notes:

1. StoGuard® Waterproof Air Barrier Membrane Options:

a. Sto Gold Coat® (vapor permeable)

b. Sto EmeraldCoat® (high perm)

c. Sto VaporSealTM (vapor impermeable)

d. Sto AirSealTM (high perm)

5. Continuous foam plastic insulation must be approved and in conformance with IRC Section 316 or IBC Chapter 26, depending on construction type (note required fire tests for use on noncombustible construction).

4. Insulation type and location relative to assembly components to be determined by qualified professional.

3. Refer to Sto specifications and product bulletins for detailed information on substrates and Sto material options.

6. For dynamic movement joints, joint treatment must be in compliance with the project’s specifications & details

Roof Perimeter Air Barrier Layer

Parapet Flashing

Fully Adhered Waterproof Membrane

Fully Adhered Roof Membrane

Compatible Pre-Cured Silicone Sealant Tape Set in Compatible Sealant (See Note 6)

Roof Insulation (Joints Staggered Horizontally & Vertically)

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Blocking as Req’d

Masonry Veneer

Parapet Flashing

Fully Adhered Waterproof Membrane

StoGuard® Waterproof Air Barrier Membrane (See Note 1)

Continuous Cleat

StoGuard® Transition Membrane (See Note 2)

2. StoGuard® Transition Membrane Options:

a. StoGuard® RapidSealTM with StoGuard® Mesh

b. Sto Gold Fill® with StoGuard® Mesh (Topcoat with StoGuard® Waterproof Air Barrier Membrane)

c. StoGuard® Fabric with StoGuard® Waterproof Air Barrier Membrane

StoGuard® Transition Membrane (See Note 2)

Roof Structure

Vapor Control Membrane (Vapor Permeance as Determined by Qualified Professional)

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 4 & 5)

Compatible Fully Adhered Waterproof & Air Barrier Transition Membrane

Cover Bd.

Cont. Cleat

Compatible Fully Adhered Waterproof & Air Barrier Trans. Membrane

Vapor Control Membrane (Vapor Permeance as Determined by Qualified Professional)

Sto Insul-XTM XPS or Other Approved Continuous Insulation (See Notes 4 & 5)