strain relief bushings - cords canada · 11 cords canada ltd., 62 densley avenue, toronto, ont. m6m...
TRANSCRIPT
10
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
STRAIN RELIEF BUSHINGSHeyco invented the strain reliefÑthey
were the first and they're still the best. In fact, Heyco's consistent high standards and total quality commitmenthave entitled them to become a part of
the CSA "Partnership Concept", allowingthem to self-certify the products theymanufacture.
Heyco strain reliefsÑcost-effective,reliable protection. Don't settle for less
than the best. For detailed informationabout these and other Heyco products,ask us for the current Heyco catalogue.
RIGHT ANGLE
STRAIGHT-THRU
BELL-MOUTH
Protect the lifeline of your electricand electronic products by absorbingthe forces of pull, push and twist thatmay be exerted on the flexible powercord. These nylon strain reliefs securelyanchor, insulate and protect cables at
chassis entry points.Available in both black and white for
flat or round cables. Sizes range frommounting hole diameters of .375 up to1.187, and with maximum chassis thicknesses from .040 up to .281.
Add reliability, longevity and safety toyour product. These are designed toabsorb flex in addition to forces of pull,push and twist like a standard strainrelief. A flared "trumpet" exit prevents
sharp bending. Use in place of the pig-tail, when space is at a premium.
Available in black and white nylon forboth flat and round cables. Mountinghole diameters range from .375 to .625.
Providing the same protection foryour cable as the straight-thru, the rightangle strain relief allows the cable toexit flush against the chassis, savingspace and directing the cable parallel tothe chassis. Excellent for use where
space is limited. Also acts as a back orbottom bumper.
Available in black and white nylon forflat and round cables. Mounting holediameters from .437 to 1.093, and chassis thicknesses from .062 to .125.
11
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
STRAIN RELIEF BUSHINGS CONTINUED
PIGTAIL™
Pigtail strain reliefs (one with an integral nylon spring and the other with aseparate metal spring) offer the samefeatures as bell-mouths but are intendedfor use where flex protection is critical.The long spring section eases the cableinto a gentle curve, prohibiting sharpbends and assuring the longest cableand product life.
The all-nylon pigtail is available inblack and white, the nylon and metal onlyin black. Both are only available for roundcable applications.
Made of plated steel, exclusively forround cables. These absorb pull forceonly (to help meet UL and CSA require-ments). Easily assembled (with recom-mended hand pliers) to wire and cablesinside the chassis.
For those of you dealing with overseasmarkets, Heyco also produces a varietyof strain reliefs suitable for meetingEuropean requirements.
METAL
FOR EUROPEAN REQUIREMENTS
CEE Series USR Series
12
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
SNAP AND SHORTY BUSHINGSThese nylon bushings convert raw-
edged holes to smooth, neat, insulatedones. Special locking "fingers" allow thebushings to snap into holes with fingertippressure. Mechanically protect, insulate,and isolate telecommunications and electrical cables, tubing, hose, rope, utility lines, as well as low RPM shafts and push-pull rods.
Snap bushings are available in 54 sizesfor use in 1/4" to 4" diameter holes.
Chassis thicknesses range from .040 to.250. Stocked in both black and whitenylon. Three sizes are also available inbrass colour for lamp and lighting applications.
Shorty bushings are used for limitedinternal clearance (minimum 1/8") applications. They all have a maximumchassis thickness of .062. Available inblack or white nylon for 16 standard mounting hole diameters.
UNIVERSAL BUSHINGS
OPEN/CLOSED BUSHINGSA black nylon bushing that allows side
entry and encirclement of pre-assembledharnesses, capillary tubes or other unitsthat have sections larger than the bushing's ID. They can also be assembledinto holes that already contain cable or
tubing. Fingertip pressure snaps the bushing into the mounting hole, forming a complete circle and insulation barrieragainst the raw edge of the chassis hole.
These bushings will absorb vibration,cushion and insulate cables, tubing, hosesor shafts. They feature flexible shutterswhich adjust to accommodate and supportany shape from 1/8" to a maximum
diameter of 13/16". Easily locked into itsmounting hole with simple fingertip pressure.
Stocked in six sizes of black nylon.
For detailed information on these
bushings and other Heyco products,
ask for our current Heyco catalogue.
13
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
GRIPMASTER STRAIN RELIEFSProvides reliable terminal protection for
all types of cord-equipped appliances andinstruments where space is limited andhigh volume production is required.
The Gripmaster has a fiber insulatingmaterial retained in a cold-rolled steelframe. When applied, it forms a compact,rugged ring that firmly grips the cord.
.250
.312
.187
.343
.187
.250
.125
.312
.343
.406
.281
.453
Gripmaster #1Gripmaster #2Gripmaster #3Gripmaster #6
Part No.Approx.
Wire Diameter A B
Gripmaster Hand Tool available (fits all sizes).
ARMOUR (ANTI-SHORT) BUSHINGSUsed at entrance to flexible metallic
conduit or armoured cable. Insulates andprotects electrical wires from being cut byrough cut conduit ends. Chamfered lead-in allows for fast installation. Also used inholes through which ropes and steelcables pass, to prevent chafing, cutting orscraping, where bushing space is verylimited. Suitable for installation at temper-atures as low as -40¡F.
14/2, 14/3, 12/2, 12/3
14/4, 6/1, 4/1,
12/4, 10/2, 10/3, 2/1
10/4, 8/2, 8/3, 1/1
.29 -.33
.33 -.42
.43 -.57
.58 -.72
23/64
13/32
17/32
47/64
AB0
AB1
AB2
AB3
Part No.Will Fit These
Armoured Cables Fits Cable IDA
Inside Dia.
Minimum order 1000.Standard colour: Red.
Minimum order 1000.
14
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
GROMMETINGUse grommeting to protect tubes, wires
and cables from becoming frayed or cut bysharp panel edges. Makes bushings for allsizes and shapes of panel cutouts in sheetmetal, glass, wood panels or other sheet-form materials. No tools required-just cut tosize and insert. Depending on the panelthickness, grommeting may grip tightly byitself, or it may need a touch of epoxy tokeep it in place.
EXTRUDED SERRATED POLYETHYLENE
GRPE 40GRPE 52GRPE 62GRPE 85
GRPE 100GRPE 125GRPE 187GRPE 250
.040
.052
.062
.085
.100
.125
.187
.250
.190
.190
.200
.200
.220
.220
.270
.280
.125
.125
.170
.162
.210
.205
.275
.370
.040
.040
.045
.045
.045
.050
.050
.050
CONTINUOUS SERRATED NYLON
GR 40GR 52GR 62GR 85GR 100GR 125GR 187GR 250
.040
.052
.062
.085
.100
.125
.187
.250
.190
.190
.200
.200
.220
.220
.270
.280
.125
.125
.170
.170
.210
.210
.272
.370
.040
.040
.045
.045
.045
.045
.048
.050
Minimum order 1 roll. Sold in rolls of 100 ft. only.Standard colour: Black or natural white. Specify colour when ordering.
Part No.Max. Chassis
Thickness H W T
Minimum order 1 roll. Sold in rolls of 100 ft. only.Standard colour: Natural PE.
Part No.Max. Chassis
Thickness H W T
34
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
HOLE PLUGS
Close unneeded chassis holes. Moulded of blacknylon, these feature a convex, matte finish head thattapers to a thin edge. Gives your product an uninter-rupted, completed surface you can even paint over.No tools required. Just a quick push locks these firmly into chassis up to 1/4" thick.
Heyco has hole plugs for all occasions and in virtually every size you'll ever need. Plug unwantedholes, provide ventilation, allow viewing access, sealagainst liquidsÐthese are just some of the things youcan do with our hole plugs.
For further information about hole plugs and otherHeyco products, ask for the most current Heyco catalogue.
DP187DP250DP312DP375DP437
DP500DP562DP625DP687DP750
DP812DP875DP1000DP1093DP1187
DP1250DP1375DP1500DP1750DP2000
DP2.093DP2.25DP2.5DP3.0DP3.375DP3.5DP4.0
.187
.250
.312
.375
.437
.500
.562
.625
.687
.750
.812
.8751.0001.093*1.187
1.2501.3751.5001.7502.000
2.093**2.2502.5003.0003.3753.5004.000
1/161/161/161/161/16
1/161/161/161/161/16
1/161/161/161/161/16
1/161/161/161/165/64
7/647/647/647/647/647/647/64
1/45/163/8
15/3217/32
37/6421/3223/3225/3259/64
57/641-1/641-13/641-7/321-5/16
1-3/81-1/2
1-43/641-29/322-9/64
2-1/42-27/642-23/323-11/643-21/323-21/324-5/32
15/645/165/1613/3213/32
13/3213/3213/3213/3213/32
13/3229/6429/6429/6429/64
29/6429/6429/6429/6415/32
3/43/43/43/43/43/43/4
.062
.062
.062
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.125
.250
.250
.250
.250
.250
.250
.250
1,0001,0001,0001,0001,000
1,0001,0001,0001,0001,000
1,0001,000
500500500
500500500300300
200200100100100100
50
Part No.Mounting
Hole Diameter
AHead
Thickness
BHead
Diameter
COverallHeight
MaximumChassis
Thickness
MinimumOrderQty.
Standard colour: Black.Other colours available at premium charge if quantities are sufficient.
* can be used up to 1.125 diameter** can be used up to 2.125 diameter
DOME PLUGS
35
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
HOLE PLUGS CONTINUED
SHORTY PLUGS
Use when space inside the panel is aproblem. Shorty plugs have a limited(1/8Ó) protrusion inside the panel. Theyhave a matte finish head tapering to athin edge for a smooth finished look.Quickly and easily installed.
Part No.Mounting
Hole Diameter
AHead
Thickness
BHead
Diameter
COverallHeight
MaximumChassis
Thickness
SP218SP281SP312SP343SP375
SP406SP437SP468SP500SP531
SP593SP625SP750SP781SP875
.218
.281
.312
.343
.375
.406
.437
.468
.500
.531
.593
.625
.750
.781
.875
1/161/161/161/161/16
1/161/161/161/161/16
1/161/161/161/161/16
9/3211/323/8
13/3215/32
15/3217/3217/3237/6419/32
11/1623/3227/3257/6431/32
1/41/41/41/41/4
1/41/41/41/41/4
1/41/41/41/41/4
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
.062
Minimum order 1000.Standard colour: Black.Other colours available at premium charge if quantities are sufficient.
MAXIMUM CHASSISTHICKNESS
A
C
36
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
HOLE PLUGS CONTINUED
PRY OUT PLUGS INSULATION PLUGS
ALSO AVAILABLE:
Just like a dome plug, but with holesthat permit air ventilation and heat dissipation. It leaves you with an attractive cover for unsightly or rough-edged chassis holes. Twenty sizes foruse in 1/2" to 4" diameter holes. Quickand easy installation with only fingertippressure.
VENT PLUGS
PAPER TUBE PLUGSThe 1Ó to 6Ó polyethylene paper tube
plugs come with convenient fingerpulltabs (one or two, depending on size),and are 1/2" deep. Standard colour isnatural white. Other colours available(minimum order 10,000).
The 8" to 12" diameters only come inblack high density polyethylene. Theyhave a wide flange for easy removalfrom tubes, and are 1-1/4" deep.
TP 1000TP 1250TP 1375TP 1500
TP 1750TP 2000TP 2250TP 2500
11-1/41-3/81-1/2
1-3/42
2-1/42-1/2
Part No. Fits Tube ID Part No. Fits Tube ID
TP 2750TP 3000TP 3500TP 4000
TP 5000TP 6000TP 8000TP 10000TP 12000
2-3/43
3-1/24
568
1012
37
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
HOLE PLUGS CONTINUED
Got a strain relief hole where it shouldn'tbe? Don't start again; just fill it with a double"D" plug. These work for other chorded or"DD" holes as well (holes punched or mouldedwith two opposing flats). The convex, mattefinish head tapers to a thin edge, giving yourchassis a completed look. All sizes have ahead thickness of 1/16", and fit a maximumchassis thickness of .125.
.437
.500
.562
.625
.750
.875
.390
.445
.530
.550
.625
.770
17/3237/6421/3223/3259/641-1/64
13/3213/3213/3213/3213/3229/64
DD437-390DD500-445DD562-530DD625-550DD750-625DD875-770
Part No.Mounting
Hole Diameter
DTo PreventRotation
BHead
Diameter
COverallHeight
Minimum order 1000.
DOUBLE “D” PLUGS
82
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
No disassembly, no threading and thecomplete conduit/connector system is reuseable, too. The economical and smartalternative.
Simply push the Heyco-Flex tubing orconduit onto the connector ferrule, thenhand tighten the domed sealing nut. (No disassembly means no lost parts).No threading eliminates the possibility of cutting the tubing/conduit and creating leakpaths. The tubing/conduit will not wind tightonto the connector during assembly andcan be easily removed by pulling whileturning in a clockwise direction.
The Heyco-Flex nylon connectors resistrefrigerants, weak acids, gasoline, alcohol,oil, grease and common solvents. Threestyles, straight, right angle and snap-in,are available in either black or gray.
HEYCO-FLEXª LIQUID TIGHT CONNECTOR/CONDUIT SYSTEM
HEYCO-FLEX I LIQUID TIGHT CONDUIT
HEYCO-FLEX II LIQUID TIGHT TUBING
HEYCO-FLEX NYLON CONNECTORS
This flexible, gray PVC, liquid tight conduit is suitable for both indoor and outdoor use. It resists corrosion, abrasion,oil, water, acid, metal shavings and roughenvironments. It also resists abuse, pulland crushing. A smooth inside allows foreasier wire pulling, with no hazardous
sharp edges or burrs. It may be used withboth the Heyco nylon connectors andmetal connectors. Quickly installed andeasily cut with utility knife or PVC cutter.Available in seven trade sizes, 3/8"through 2".
The superior flexibility of this tubingmeans it can be used in extremely tightquarters. It's also ideal for fiber opticcable protection. It resists corrosion, oil
and water and is made of black PVC.Available in 1/4" through 2" trade sizes.May be used with snap-in, straight or rightangle Heyco-Flex connectors.
83
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
LIQUID TIGHT FITTINGS FOR FLEXIBLE CORDSAll nylon construction with BUNA-N
compression gland resists salt water,weak acids, gasoline, alcohol, oil, greaseand common solvents. Fittings install ineither clearance or threaded holes. Acmethreads prevent skipping and speedinstallation. The domed sealing nutresists snags and sheds contaminants.
An internal ratchet provides self-lockingagainst vibration.
Choose from two different styles:Straight-thru or Pigtail. The Pigtail has aflexible extender to prevent sharp bends,extend cable life. Locknuts are includedwith both styles on PG hubs only. Toorder separately or for specifications,
see page 85.Working temperatures: -22¡F (-30¡C)
to 212¡F (100¡C). For short periods to302¡F (150¡C). Protection class IP 68 perDIN 40050 up to 70 psi (5 bar) waterpressure.
STRAIGHT-THRU
.114 -.250
.064 -.210
.181 -.312
.069 -.187
.230 -.395
.069 -.260
.170 -.470
.230 -.546
.450 -.709
.250 -.485
.590 -1.00
.866 -1.260
.787 -1.020
1.260 -1.496.984 -1.220
1.457 -1.7321.142 -1.378
Pg 7
Pg 9
Pg 11
Pg 13.5
Pg 16
Pg 21
Pg 29
Pg 36
Pg 42
Pg 48
.492
.599
.733
.804
.886
1.115
1.470
1.850
2.125
2.335
1.17
1.30
1.46
1.53
1.66
1.87
2.23
2.38
2.36
2.40
.33
.34
.39
.41
.45
.52
.59
.50
.51
.55
.22
.20
.20
.20
.23
.23
.28
.32
.33
.33
.59
.75
.86
.95
1.05
1.30
1.66
2.09
2.36
2.56
PG Hubs (locknuts included*)
Cable Dia.Range
Min.Ð Max.
ThreadType
& Size
AClearance
Hole
CMax. O.A.
Length
DThreadLength
E WrenchingNut Thick.
FWrenching
Flats
Part No.
32073444
32103446
32133448
3216
3219
32223454
3225
32043206
32123218
32813283
32083445
32113447
32143449
3217
3220
32233455
3226
32053209
32153221
32823284
Black Gray
INSTALLATION NOTE: For optimum liquid tightness, use fitting with the smallest maximum dia-meter that will still fit your application.
ContinuedFor specifications or to order locknuts separately, see page 85.
84
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
LIQUID TIGHT FITTINGS FOR FLEXIBLE CORDS
.181 -.312
.069 -.187
.230 -.546
.170 -.470
.250 -.485
.450 -.709
.590 -1.00
.472 -.787
3/8 NPT
1/2 NPT
3/4 NPT
1 NPT
.670
.875
1.068
1.375
1.49
1.831.72
1.97
2.42
.53
.62
.63
.78
.20
.20
.23
.28
.75
.95
1.30
1.66
Cable Dia.Range
Min.-Max.
ThreadType
& Size
AClearance
Hole
CMax. O.A.
Length
DThreadLength
EWrenchingNut Thick.
FWrenching
Flats
NPT Hubs (locknuts not included*)
Part No.
*For specifications or to order locknuts separately, see page 85.
PIGTAILª
.114 -.250
.064 -.210
.181 -.312
.069 -.187
.230 -.395
.069 -.260
.170 -.470
.230 -.546
.450 -.709
.250 -.485
Pg 7
Pg 9
Pg 11
Pg 13.5
Pg 16
Pg 21
.492
.599
.733
.804
.886
1.115
2.44
2.77
3.44
3.88
4.36
5.03
.33
.34
.39
.41
.45
.52
.22
.20
.20
.20
.23
.23
.59
.75
.86
.95
1.05
1.30
Cable Dia.Range
Min.- Max.
ThreadType &
Size
AClearance
Hole
CMax. O.A.
Length
DThreadLength
EWrenchingNut Thick.
FWrenching
Flats
Part No.
*For specifications or to order locknuts separately, see page 85.
32283458
32003231
34603234
84378439
32293459
32013232
34613235
84388440
Black Gray
32373464
32403466
32433468
3246
3249
32453478
32383465
32413467
32443469
3247
3250
32483479
Black Gray
PG Hubs (locknuts included*)
STRAIGHT-THRU CONTINUED
Continued
85
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
LIQUID TIGHT FITTINGS FOR FLEXIBLE CORDS
PIGTAILª CONTINUED
Cable Dia.Range
Min.- Max.
ThreadType
& Size
AClearance
Hole
CMax. O.A.
Length
DThreadLength
EWrenchingNut Thick.
FWrenching
Flats
Part No.
Black Gray
32543474
3251
32393462
32553475
3252
32423463
.181 -.312
.069 -.187
.170 -.470
.450 -.709
.250 -.485
3/8 NPT
1/2 NPT
3/4 NPT
.670
.875
1.068
2.97
4.09
5.14
.53
.62
.63
.20
.20
.23
.75
.95
1.30
NPT Hubs (locknuts not included*)
LOCKNUTS
NLN3/8NPTNLN1/2NPTNLN3/4NPTNLN1NPT
3/8 NPT1/2 NPT3/4 NPT1 NPT
.265
.265
.265
.265
1.0581.0581.3121.625
NLNPG7NLNPG9NLNPG11NLNPG13.5NLNPG16NLNPG21NLNPG29
PG 7PG 9PG 11
PG 13.5PG 16PG 21PG 29
.218
.218
.218
.250
.250
.281
.281
.750
.859
.9371.0621.1711.4061.812
Part No.Thread Type
& Size G H
Minimum order 100.
National Pipe Threads
Steel Conduit Threads per DIN 40430
118
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
NYLON PCB SUPPORTS/SPACERSProvide spacing between the printed circuit
board and the chassis or between the circuitboards. Wide ribbed wings produce a securefit with extra stability. Available in two materials: natural nylon 6/6 (ASTM D-4066-82, flammability classification 94V-2) or flame
retardant (FR) white nylon (with a 94V-0 flammability classification).
There are two styles to choose from: (1) chassis barb end plus tension barb endfor PCB; (2) chassis barb end plus lockingbarb end for PCB.
36403670
36413671
36423672
36433673
36443674
36453675
36463676
36473677
36483678
36493679
36503680
36513681
36553685
36563686
36573687
36583688
36593689
36603690
36613691
36623692
36633693
36643694
36653695
36663696
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
tensionlocking
3/16
1/4
3/8
7/16
1/2
5/8
3/4
7/8
1
1-1/8
1-1/4
1-3/8
7/853/64
15/1657/64
1-1/161-1/64
1-1/81-5/64
1-3/161-9/64
1-5/161-17/64
1-7/161-25/64
1-9/161-33/64
1-11/161-41/64
1-13/161-49/64
1-15/161-57/64
2-1/162-1/64
Part No.
Minimum order 1000.
Natural Nylon FR Nylon Barb TypeA
SpacingB
Overall Length
Type LengthChassisor PCB
MountingHole Dia.
Max. Chassisor PCB Thick.
ChassisTension
.200*.400
ChassisPCB
3/165/32
.070
.062
Barb Data
*Extension beyond a .070 thick chassis. Base barb wing spread is 35/64.
Mounting Data
125
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
CABLE TIES CONTINUED
BEADED TIES
Releasable and reuseable ties for easybinding, closing, bagging, holding and tying.Available in two materials: polyethylene forhigh flexibility and moderate strength, andnylon for less flexibility and more strengthwith high resistance to temperature andchemicals.
Polyethylene ties are stocked in red and
available in natural, black, blue, and yellow.Nylon ties are stocked in natural and alsoavailable in black. Please specify colourwhen ordering.
An adhesive backed mounting platform(Part No. MPBTA) is also available.Moulded of natural nylon, it may also bescrew mounted.
4E5E6E8E10E14E18E
4-5/325
6-1/28-11/1610-11/16
1418
1-1/81-3/81-7/82-1/2
345
10101818181818
1,0001,0001,0001,0001,000
500500
Part No. Overall LengthMax. Bundle
DiameterTensile
Strength (lbs.)Min. Order
Qty.
Polyethylene
Nylon
4N5N6N8N10N14N18N
4-1/45-3/326-19/328-7/8
10-27/321418
1-1/81-3/81-7/82-1/2
345
40407575757575
1,0001,0001,0001,0001,000
500500
CABLE TIE MOUNTING PLATFORMS
adhesiveadhesive (w/opt. screw mt.)
screwadhesive (w/opt. screw mt.)
screw
push mountscrewscrewscrew
42244
2222
Ñ(6)6
(6)6
Ñ6-8108
51/64 sq.1-7/64 sq.1-7/64 sq.1-9/64 sq.1-9/64 sq.
3/8 x 5/8 head25/64 x 39/64
5/8 x 7/831/64 x 47/64
Mounting Style Insertion Points Screw Size Base Size
Minimum order 500.Colour: Stocked in natural white. Black available at an additional charge.
* mounts into .250 diameter hole
MP4A-SMP2AMP2SMP4AMP4S
MPPM250*MPS68MPS10MPLPM
Part No.
170
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
HOSE CLAMPSHOSERS (ACETAL TUBE AND HOSE CLAMPS)
A non-metallic clamp that will not rust, isnon-conducting, not corroded by sea waterand is stable in a wide variety of chemicalsalts, bases, alcohols, oil, grease, gasoline,etc. Often used in place of stainlessclamps.
Can be applied by quick ratchet closure,even after hose is in place. A lateral effortdisengages the clamp. A stand and a pneumatic closing tool are aIso available.
Stocked in acetal. Black nylon, glass-reinforced for outdoor or under the hoodapplications also available at an additionalcharge.
HO 1HO 1.5HO 2HO 4
HO 6HO 7HO 8HO 10
HO 12HO 14HO 16HO 18
HO 19HO 22HO 24HO 28
HO 32HO 34HO 36HO 38
HO 42HO 50HO 60HO 70
HO 76HO 80HO 90HO 100
.228 -.256
.307 -.342
.351 -.394
.404 -.452
.449 -.511
.453 -.546
.513 -.586
.569 -.650
.616 -.707
.702 -.801
.746 -.848
.779 -.899
.859 -.989.928 - 1.072.985 - 1.135
1.123 - 1.296
1.218 - 1.4051.338 - 1.5661.472 - 1.7241.594 - 1.862
1.729 - 2.0211.999 - 2.2772.259 - 2.5822.536 - 2.881
2.839 - 3.2063.144 - 3.5623.506 - 3.9223.871 - 4.395
.148
.146
.231
.233
.233
.253
.231
.233
.234
.233
.232
.237
.233
.234
.292
.288
.287
.292
.287
.291
.288
.291
.290
.288
.387
.388
.385
.394
Part No. Diameter Range Width
Minimum order 100.
Heyco has a full line of nylon hoseclamps. They are quick, easy to installand tighten instantly with hand pliers.These lightweight clamps resist salt,water corrosion, weak acids, grease
and common solvents. Hose Mates™can be removed without cutting, sothey are reuseable Ð both recyclableand cost-effective!
Heyco Hose Mates™ are availablein seventeen popular sizes, from a minimum diameter of 1/4" up to a maximum diameter of 2-3/8". Cordsstocks them in black and white nylon,and they are also available in glass-filled black or white nylon.
For your convenience, HeycoLabKit No. 9 comes with a 115-piece assortment of hose clamps in 12 popular sizes ranging from 11/32" to 1-5/8". Heyco LabKits are the perfectanswer for product design andresearch departments. Each clearplastic box contains an assortment ofthe most popular part sizes, with information mounted inside the box liddescribing the contents of each compartment.
For detailed information on hoseclamps, LabKits and other Heyco products, ask us for our current Heycocatalogue.
NYLON HOSE MATES™
171
Cords Canada Ltd., 62 Densley Avenue, Toronto, Ont. M6M 5E1Toronto Calling Area: (416) 242-6811 Outside Toronto Area: 1-800-363-5080
Fax: (416) 242-6819
NYLON CABLE CLAMPS
3362336333643365336633673368
3352335333543355335633573358
3372337333743375
3376337733783379
3380338133823383
3384339033923393
339433963398
3312331333143315331633173318
3302330333043305330633073308
3322332333243325
3326332733283329
3330333133323333
3334334033423343
334433463348
.170
.203
.203
1/83/161/4
5/163/8
7/161/2
1/83/161/4
5/163/8
7/161/2
1/83/161/4
5/16
3/87/161/2
9/16
5/811/163/4
13/16
7/81
1-1/81-3/16
1-1/41-3/81-1/2
.343
.378
.421
.441
.464
.500
.530
.343
.378
.421
.441
.464
.500
.530
.384
.410
.437
.474
.500
.533
.553
.603
.625
.665
.699
.765
.795
.825
.940
.963
.9801.0451.114
Black WhiteMountingHole Dia. A B
Part No.
Light DutyÐ3/8" wide, .050 thick
Heavy DutyÐ1/2" wide, .060 thick
Conform to the following Mil spec: Mil Std 24E, Mil C-21565 (NAS), Mil P-17091-B
Recognized under the Component Programof Underwriters Laboratory File #E-54523
Don't forget to ask about Heyco LabKits Ð agreat idea for product design and researchdepartments. Each clear plastic box contains anassortment of the most popular part sizes, withinformation mounted inside the box lid thatdescribes the contents of each compartment.
For your convenience, Heyco LabKit No. 5contains 285 cable clamps in 18 different sizes(both light and heavy duty), for sizes of 1/8" to1-1/2" diameter applications.
For further information about LabKits andother Heyco products, ask us for the currentHeyco catalogue.