straumann® single-patient instruments surgical user...
TRANSCRIPT
Technical Information
Straumann® Single-patient instruments
Surgical User Guide
702336-en.indd 1 18/10/2017 14:53
Contents
1. Step by step with the surgical user guide 3
2. How to use the surgical user guide with single-patient instruments 4
3. Overview of single-patient instrument range 5
4. Select the implant type 8
5. Straumann® PURE Ceramic Implant Monotype Line 9
6. Straumann® Standard Plus Implant Line 18
7. Straumann® Standard Implant Line 41
8. Straumann® Tapered Effect Implant Line 62
9. Straumann® Bone Level Implant Line 74
10. Straumann® Bone Level Tapered Implant Line 87
702336-en.indd 2 18/10/2017 14:53
3
1. Step by step with the surgical user guideA print-out surgical protocol to use with single-patient drills.
Step 1 - Download the surgical user guide on the eIFU website: ifu.straumann.com
Step 2 - Select the implant type you plan to place. Print out the page.
Step 3 - Order the relevant single-patient instruments from the section Overview of single-patient instruments
Step 4 - Bring the print out to surgery. Place the drills on to the print out to visualize the workflow.
702336-en.indd 3 18/10/2017 14:53
4
2. How to use the surgical user guide with single-patient instruments
Picture shows the drills at their implant preparation depth and their corresponding drill depth markings.
Real size picture of single-patient drills. Place the actual product on the print-out paper to prepare for the surgery.
Drills come in different lengths. Each page recommends a drill length for the chosen implant type. Surgeons can choose another length depending on the patient situation. See section Overview of single-patient instruments.
Some implants have optional drilling steps depending on bone class.
Some instruments are not provided for single-patient use (e.g. PURE position indicators, implant adapters, ratchet) and need to be reprocessed or disposed.
Numbers in the drill protocol above show the relevant instruments below.
Depending on bone class, a hollow number with a dotted line shows optional drills. Solid numbers with a solid line show mandatory drills.
1. Select the implant type
2. Print out this page to prepare for surgery
702336-en.indd 4 18/10/2017 14:53
5
3. Overview of single-patient instrument range
Type Art. No. Description Material
Alignment Pin, single use
040.578S Alignment Pin Set, single use Ti
Round Bur, single use
044.761SRound Bur, ∅ 2.3 mm, single use
Stainless steel
044.762SRound Bur, ∅ 3.1 mm, single use
Stainless steel
Needle Drill, single use
027.0006SNeedle Drill, short, ∅ 1.6 mm, single use
TAN
027.0007SNeedle Drill, long, ∅ 1.6 mm, single use
TAN
Drill Set ∅ 3.3, single use
040.571SDrill Set, short, for ∅ 3.3 mm implants, single use
TAN
040.574SDrill Set, long, for ∅ 3.3 mm implants, single use
TAN
Drill Set ∅ 4.1, single use
040.572SDrill Set, short, for ∅ 4.1 mm implants, single use
TAN
040.575SDrill Set, long, for ∅ 4.1 mm implants, single use
TAN
Type Art. No. Description Material
Drill Set ∅ 4.8, single use
040.573SDrill Set, short, for ∅ 4.8 mm implants, single use
TAN
040.576SDrill Set, long, for ∅ 4.8 mm implants, single use
TAN
BLT Drill Set ∅ 3.3, single use
027.0000SBLT Drill Set, short, for ∅ 3.3 mm implants, single use
TAN
027.0003SBLT Drill Set, long, for ∅ 3.3 mm implants, single use
TAN
BLT Drill Set ∅ 4.1, single use
027.0001SBLT Drill Set, short, for ∅ 4.1 mm implants, single use
TAN
027.0004SBLT Drill Set, long, for ∅ 4.1 mm implants, single use
TAN
BLT Drill Set ∅ 4.8, single use
027.0002SBLT Drill Set, short, for ∅ 4.8 mm implants, single use
TAN
027.0005SBLT Drill Set, long, for ∅ 4.8 mm implants, single use
TAN
All products not available in all countries. Please consult your local representative for more information.
702336-en.indd 5 18/10/2017 14:53
6
Type Art. No. Description Material
SP Profile Drill, single use
044.742SSP Profile Drill, short, ∅ 3.3 mm, single use
TAN
044.743SSP Profile Drill, short, ∅ 4.1 mm, single use
TAN
044.744SSP Profile Drill, short, ∅ 4.8 mm, single use
TAN
044.748SSP Profile Drill, long, ∅ 3.3 mm, single use
TAN
044.749SSP Profile Drill, long, ∅ 4.1 mm, single use
TAN
044.750SSP Profile Drill, long, ∅ 4.8 mm, single use
TAN
TE Profile Drill, single use
044.745STE Profile Drill, short, ∅ 3.3 mm, single use
TAN
044.746STE Profile Drill, short, ∅ 4.1 mm, single use
TAN
044.747STE Profile Drill, short, ∅ 4.8 mm, single use
TAN
044.751STE Profile Drill, long, ∅ 3.3 mm, single use
TAN
044.752STE Profile Drill, long, ∅ 4.1 mm, single use
TAN
044.753STE Profile Drill, long, ∅ 4.8 mm, single use
TAN
Type Art. No. Description Material
BL Profile Drill, single use
026.0089SBL Profile Drill, short, ∅ 3.3 mm, single use
TAN
026.0090SBL Profile Drill, short, ∅ 4.1 mm, single use
TAN
026.0091SBL Profile Drill, short, ∅ 4.8 mm, single use
TAN
026.0096SBL Profile Drill, long, ∅ 3.3 mm, single use
TAN
026.0097SBL Profile Drill, long, ∅ 4.1 mm, single use
TAN
026.0098SBL Profile Drill, long, ∅ 4.8 mm, single use
TAN
BLT Profile Drill, single use
026.0092SBLT Profile Drill, short, ∅ 2.9 mm, single use
TAN
026.0093SBLT Profile Drill, short, ∅ 3.3 mm, single use
TAN
026.0094SBLT Profile Drill, short, ∅ 4.1 mm, single use
TAN
026.0095SBLT Profile Drill, short, ∅ 4.8 mm, single use
TAN
026.0099SBLT Profile Drill, long, ∅ 2.9 mm, single use
TAN
026.0100SBLT Profile Drill, long, ∅ 3.3 mm, single use
TAN
026.0101SBLT Profile Drill, long, ∅ 4.1 mm, single use
TAN
026.0102SBLT Profile Drill, long, ∅ 4.8 mm, single use
TAN
All products not available in all countries. Please consult your local representative for more information.
702336-en.indd 6 18/10/2017 14:53
7
Type Art. No. Description Material
S/SP Tap, single use
044.754SS/SP Tap, ∅ 3.3 mm, for adapter, single use
TAN
044.755SS/SP Tap, ∅ 4.1 mm, for adapter, single use
TAN
044.756SS/SP Tap, ∅ 4.8 mm, for adapter, single use
TAN
BL/TE Tap, single use
044.757SBL/TE Tap, ∅ 3.3 mm, for adapter, single use
TAN
044.758SBL/TE Tap, ∅ 4.1 mm, for adapter, single use
TAN
044.759SBL/TE Tap, ∅ 4.8 mm, for adapter, single use
TAN
BLT Tap, single use
026.0103SBLT Tap, ∅ 2.9 mm, for adapter, single use
TAN
026.0104SBLT Tap, ∅ 3.3 mm, for adapter, single use
TAN
026.0105SBLT Tap, ∅ 4.1 mm, for adapter, single use
TAN
026.0106SBLT Tap,∅ 4.8 mm, for adapter, single use
TAN
All products not available in all countries. Please consult your local representative for more information.
702336-en.indd 7 18/10/2017 14:53
8
SP S TE BL BLTPURE AH 4mm
(PURE AH 5.5mm)
∅3.3 ∅3.3 ∅4.1 ∅4.8 ∅4.8 ∅3.3 ∅4.1 ∅4.8 ∅4.8 ∅3.3 ∅4.1 ∅4.8 ∅3.3 ∅4.1 ∅4.8 ∅2.9 ∅3.3 ∅4.1 ∅4.8 ∅3.3 ∅4.1
NNC RN RN RN WN RN RN RN WN RN RN WN NC RC RC SC NC RC RC ND RD
6 mm - - 033.560S 033.590S 033.610S - 033.530S 033.580S 033.600S - - - - - - - - - - - -
8 mm 033.416S 033.511S 033.561S 033.591S 033.611S 033.501S 033.531S 033.581S 033.601S 033.521S 033.571S - 021.2308 021.4308 021.6308 - 021.3308 021.5308 021.7308031.001S
(031.011S)031.021S
(031.031S)
10 mm 033.417S 033.512S 033.562S 033.592S 033.612S 033.502S 033.532S 033.582S 033.602S 033.522S 033.572S 033.622S 021.2310 021.4310 021.6310 021.0010 021.3310 021.5310 021.7310031.002S
(031.012S)031.022S
(031.032S)
12 mm 033.418S 033.513S 033.563S 033.593S 033.613S 033.503S 033.533S 033.583S 033.603S 033.523S 033.573S 033.623S 021.2312 021.4312 021.6312 021.0012 021.3312 021.5312 021.7312031.003S
(031.013S)031.023S
(031.033S)
14 mm 033.419S 033.514S 033.564S 033.594S - 033.504S 033.534S 033.584S - 033.524S 033.574S 033.624S 021.2314 021.4314 021.6314 021.0014 021.3314 021.5314 021.7314031.004S
(031.014S)031.024S
(031.034S)
16 mm - - - - - 033.505S 033.535S - - - - - - - - - 021.3316 021.5316 021.7316 - -
18 mm - - - - - - - - - - - - - - - - 021.3318 021.5318 021.7318 - -
4. Select the implant type
SSPNNC TE BL BLT CIM
Note: Click on the implant article number.
All products not available in all countries. Please consult your local representative for more information.
702336-en.indd 8 18/10/2017 14:53
9
5. Straumann® PURE Ceramic Implant Monotype Line
702336-en.indd 9 18/10/2017 14:53
10
Soft bone drilling stops here
CIM∅ 3.3 ND
ZLA® 8AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5
3
4 4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
031.001S
5.1 CIM ∅3.3 ND Length 8 mm
702336-en.indd 10 18/10/2017 14:53
11
Soft bone drilling stops here
CIM∅ 3.3 NDZLA® 10
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5
3
44 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
031.002S
5.2 CIM ∅3.3 ND Length 10 mm
702336-en.indd 11 18/10/2017 14:53
12
Soft bone drilling stops here
CIM∅ 3.3 NDZLA® 12
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
031.003S
5.3 CIM ∅3.3 ND Length 12 mm
702336-en.indd 12 18/10/2017 14:53
13
Soft bone drilling stops here
CIM∅ 3.3 NDZLA® 14
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
031.004S
5.4 CIM ∅3.3 ND Length 14 mm
702336-en.indd 13 18/10/2017 14:53
14
Soft bone drilling stops here
5.5 CIM ∅4.1 RD Length 8 mm
CIM∅ 4.1 RDZLA® 8
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5 7
3
4 4 6 8
4 6 1010
10
5 7
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758SBL/TE Tap ∅4.1
9
9 031.021S
702336-en.indd 14 18/10/2017 14:53
15
Soft bone drilling stops here
5.6 CIM ∅4.1 RD Length 10 mm
CIM∅ 4.1 RDZLA® 10
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5 7
3
44 6 8
4 6 810
10
5 7
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758SBL/TE Tap ∅4.1
9
9 031.022S
702336-en.indd 15 18/10/2017 14:53
16
Soft bone drilling stops here
5.7 CIM ∅4.1 RD Length 12 mm
CIM∅ 4.1 RDZLA® 12
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
3
4
4 6 8
4 6 810
10
5 7
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758SBL/TE Tap ∅4.1
9
9031.023S
702336-en.indd 16 18/10/2017 14:53
17
Soft bone drilling stops here
5.8 CIM ∅4.1 RD Length 14 mm
CIM∅ 4.1 RDZLA® 14
AH4, ZrO2
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axisCheck implant position
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. PURE position indicators are multi use. The above information is an extract. Refer to “NAMLIT 1099 Basic information on the surgical and prosthetic procedures - Straumann® PURE Ceramic Implant”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
3
4
4 6 8
4 6 810
10
5 7
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.575SDrill Set Long ∅4.1 Implants
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758SBL/TE Tap ∅4.1
9
9 031.024S
702336-en.indd 17 18/10/2017 14:53
18
6. Straumann® Standard Plus Implant Line
702336-en.indd 18 18/10/2017 14:54
19
Soft bone drilling stops here
SP∅ 3.3 NNCSLActive® 8
TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5
3
4 4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.416S
6.1 SP ∅3.3 NNC Length 8 mm
702336-en.indd 19 18/10/2017 14:54
20
Soft bone drilling stops here
SP∅ 3.3 NNC
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5
3
44 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.417S
6.2 SP ∅3.3 NNC Length 10 mm
702336-en.indd 20 18/10/2017 14:54
21
Soft bone drilling stops here
SP∅ 3.3 NNC
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.418S
6.3 SP ∅3.3 NNC Length 12 mm
702336-en.indd 21 18/10/2017 14:54
22
Soft bone drilling stops here
SP∅ 3.3 NNC
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.419S
6.4 SP ∅3.3 NNC Length 14 mm
702336-en.indd 22 18/10/2017 14:54
23
7
Soft bone drilling stops here
SP∅ 3.3 RN
SLActive® 8TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4 4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
044.748SSP Profile Drill Long ∅3.3
044.754S S/SP Tap ∅3.3
7
033.511S
6.5 SP ∅3.3 RN Length 8 mm
3 3 5
702336-en.indd 23 18/10/2017 14:54
24
7
Soft bone drilling stops here
SP∅ 3.3 RN
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
44 6
4 68
8
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.748SSP Profile Drill Long ∅3.3
044.754S S/SP Tap ∅3.3
7
033.512S
6.6 SP ∅3.3 RN Length 10 mm
33 5
3 5
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 24 18/10/2017 14:54
25
7
Soft bone drilling stops here
SP∅ 3.3 RN
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4
4 6
4 68
8
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 400 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.754S S/SP Tap ∅3.3
7
033.513S
6.7 SP ∅3.3 RN Length 12 mm
3
3 5
3 5
040.574SDrill Set Long ∅3.3 Implants
044.748SSP Profile Drill Long ∅3.3
15
702336-en.indd 25 18/10/2017 14:54
26
7
Soft bone drilling stops here
SP∅ 3.3 RN
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4
4 68
8
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 400 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
044.754S S/SP Tap ∅3.3
7
033.514S
6.8 SP ∅3.3 RN Length 14 mm
3 5
3
4 6
5
044.748SSP Profile Drill Long ∅3.3
15
702336-en.indd 26 18/10/2017 14:54
27
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
SP∅ 4.1 RN
SLActive® 6TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
34
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.572S Drill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
044.743SSP Profile Drill Short ∅4.1
044.755S S/SP Tap ∅4.1
9
9 033.560S
6.9 SP ∅4.1 RN Length 6 mm
5 7
3
6 8
5 7
702336-en.indd 27 18/10/2017 14:54
28
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
SP∅ 4.1 RN
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 34 4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 400500 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
044.743SSP Profile Drill Short ∅4.1
044.755S S/SP Tap Ø4.1
9
9 033.561S
6.10 SP ∅4.1 RN Length 8 mm
5
3
6 8
5 7
7
702336-en.indd 28 18/10/2017 14:54
29
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
SP∅ 4.1 RN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
334
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
044.743SSP Profile Drill Short ∅4.1
044.755S S/SP Tap ∅4.1
9
9 033.562S
6.11 SP ∅4.1 RN Length 10 mm
5 7
3
6 8
5 7
800 600 400500
702336-en.indd 29 18/10/2017 14:54
30
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
SP∅ 4.1 RN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
34
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
040.578SAlignment Pin Set
044.743SSP Profile Drill Short ∅4.1
044.755S S/SP Tap ∅4.1
9
9 033.563S
6.12 SP ∅4.1 RN Length 12 mm
5 7
3
6 8
5 7
800 600 400500
702336-en.indd 30 18/10/2017 14:54
31
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
SP∅ 4.1 RN
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3
4
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.575SDrill Set Long ∅4.1 Implants
040.578SAlignment Pin Set
044.743SSP Profile Drill Short ∅4.1
044.755S S/SP Tap ∅4.1
9
9 033.564S
6.13 SP ∅4.1 RN Length 14 mm
5 7
3
6 8
5 7
800 600 400500
702336-en.indd 31 18/10/2017 14:54
32
SP∅ 4.8 RN
SLActive® 6TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.573S Drill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11033.590S
6.14 SP ∅4.8 RN Length 6 mm
3
6 8 10
5 7 9
3 5 7 9
702336-en.indd 32 18/10/2017 14:54
33
SP∅ 4.8 RN
SLActive® 8TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
34
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.573SDrill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.591S
6.15 SP ∅4.8 RN Length 8 mm
3 5 7 9
3 5 7 9
4 6 8 10
600800 500 400
702336-en.indd 33 18/10/2017 14:54
34
SP∅ 4.8 RN
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
34
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.573SDrill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.592S
6.16 SP ∅4.8 RN Length 10 mm
3 5 7 9
600800 500 400
3 5 7 9
4 6 8 10
702336-en.indd 34 18/10/2017 14:54
35
SP∅ 4.8 RN
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600800 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.573SDrill Set Short ∅4.8 Implantss
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.593S
6.17 SP ∅4.8 RN Length 12 mm
3 5 7 9
3
4 6 8 10
5 7 9
702336-en.indd 35 18/10/2017 14:54
36
SP∅ 4.8 RN
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600800 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.576SDrill Set Long ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.594S
6.18 SP ∅4.8 RN Length 14 mm
9
3
10
5 7 9
3
3
4
4
5 7
6 8
702336-en.indd 36 18/10/2017 14:54
37
SP∅ 4.8 WN
SLActive® 6TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4
4 6 8 1012
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600 500 400 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.573S Drill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
044.744SSP Profile Drill Short ∅4.8
12033.610S
6.19 SP ∅4.8 WN Length 6 mm
5 7 9
11
3
6 8 10
5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
702336-en.indd 37 18/10/2017 14:54
38
SP∅ 4.8 WN
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1012
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.573SDrill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
044.744SSP Profile Drill Short ∅4.8
12
033.611S
6.20 SP ∅4.8 WN Length 8 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
800 600 400500
34
702336-en.indd 38 18/10/2017 14:54
39
SP∅ 4.8 WN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1012
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.573SDrill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
044.744SSP Profile Drill Short ∅4.8
12
033.612S
6.21 SP ∅4.8 WN Length 10 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
800 600 400500
3
4
702336-en.indd 39 18/10/2017 14:54
40
SP∅ 4.8 WN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1012
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.573SDrill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
044.744SSP Profile Drill Short ∅4.8
12
033.613S
6.22 SP ∅4.8 WN Length 12 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
800 600 400500
34
702336-en.indd 40 18/10/2017 14:54
41
7. Straumann® Standard Implant Line
702336-en.indd 41 18/10/2017 14:54
42
Soft bone drilling stops here
S∅ 3.3 RN
SLActive® 8TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5
3
4 4 6
4 67
7
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.754SS/SPTap ∅3.3
033.501S
7.1 S ∅3.3 RN Length 8 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 42 18/10/2017 14:54
43
Soft bone drilling stops here
S∅ 3.3 RN
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5
3
44 6
4 67
7
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.754SS/SP Tap ∅3.3
033.502S
7.2 S ∅3.3 RN Length 10 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 43 18/10/2017 14:54
44
Soft bone drilling stops here
S∅ 3.3 RN
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 67
7
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.754SS/SP Tap ∅3.3
033.503S
7.3 S ∅3.3 RN Length 12 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 44 18/10/2017 14:54
45
Soft bone drilling stops here
S∅ 3.3 RN
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 67
7
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.754SS/SP Tap ∅3.3
033.504S
7.4 S ∅3.3 RN Length 14 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 45 18/10/2017 14:54
46
Soft bone drilling stops here
S∅ 3.3 RN
SLActive® 16TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 67
7
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.754SS/SP Tap ∅3.3
033.505S
7.5 S ∅3.3 RN Length 16 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 46 18/10/2017 14:55
47
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
S∅ 4.1 RN
SLActive® 6TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4
4 6 89
9
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600 500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.755S S/SP Tap ∅4.1
033.530S
7.6 S ∅4.1 RN Length 6 mm
5 7
3
6 8
5 7
040.572S Drill Set Short ∅4.1 Implants
702336-en.indd 47 18/10/2017 14:55
48
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
S∅ 4.1 RN
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 89
9
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.755S S/SP Tap ∅4.1
033.531S
7.7 S ∅4.1 RN Length 8 mm
3 5 7
3 5 74 6 8
3
4
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 48 18/10/2017 14:55
49
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
S∅ 4.1 RN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 89
9
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.755S S/SP Tap ∅4.1
033.532S
7.8 S ∅4.1 RN Length 10 mm
3 5 7
3 5 7
4 6 8
3
4
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 49 18/10/2017 14:55
50
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
S∅ 4.1 RN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 89
9
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.755S S/SP Tap ∅4.1
033.533S
7.9 S ∅4.1 RN Length 12 mm
3 5 7
3 5 7
4 6 8
34
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 50 18/10/2017 14:55
51
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
S∅ 4.1 RN
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 89
9
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.755S S/SP Tap ∅4.1
033.534S
7.10 S ∅4.1 RN Length 14 mm
3 5 7
3
4
5 7
6 8
3
4
040.575SDrill Set Long ∅4.1 Implants
702336-en.indd 51 18/10/2017 14:55
52
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone – Coronal partVery hard bone – Full length
S∅ 4.1 RN
SLActive® 16TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 89
9
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.755S S/SP Tap ∅4.1
033.535S
7.11 S ∅4.1 RN Length 16 mm
3 5 7
3
4
5 7
6 8
3
4
040.575SDrill Set Long ∅4.1 Implants
600
702336-en.indd 52 18/10/2017 14:55
53
S∅ 4.8 RN
SLActive® 6TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11033.580S
7.12 S ∅4.8 RN Length 6 mm
5 7 9
3
6 8 10
5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
040.573S Drill Set Short ∅4.8 Implants
702336-en.indd 53 18/10/2017 14:55
54
S∅ 4.8 RN
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.581S
7.13 S ∅4.8 RN Length 8 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
3
4
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 54 18/10/2017 14:55
55
S∅ 4.8 RN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.582S
7.14 S ∅4.8 RN Length 10 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
3
4
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 55 18/10/2017 14:55
56
S∅ 4.8 RN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.583S
7.15 S ∅4.8 RN Length 12 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
34
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 56 18/10/2017 14:55
57
S∅ 4.8 RN
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.584S
7.16 S ∅4.8 RN Length 14 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
9
10
3
4
5 7
6 8
3
4
040.576SDrill Set Long ∅4.8 Implants
702336-en.indd 57 18/10/2017 14:55
58
S∅ 4.8 WN
SLActive® 6TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
4
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11033.600S
7.17 S ∅4.8 WN Length 6 mm
5 7 9
3
6 8 10
5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
040.573S Drill Set Short ∅4.8 implants
702336-en.indd 58 18/10/2017 14:55
59
S∅ 4.8 WN
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.601S
7.18 S ∅4.8 WN Length 8 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
3
4
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 59 18/10/2017 14:55
60
S∅ 4.8 WN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.602S
7.19 S ∅4.8 WN Length 10 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
3
4
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 60 18/10/2017 14:55
61
S∅ 4.8 WN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 1011
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.756SS/SP Tap ∅4.8
11
033.603S
7.20 S ∅4.8 WN Length 12 mm
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
3
4
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 61 18/10/2017 14:55
62
8. Straumann® Tapered Effect Implant Line
702336-en.indd 62 18/10/2017 14:55
63
Hard and soft bone drilling stops here
TE∅ 3.3 RN
SLActive® 8TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5
3
4 4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.751STE Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.521S
8.1 TE ∅3.3 RN Length 8 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 63 18/10/2017 14:55
64
Hard and soft bone drilling stops here
TE∅ 3.3 RN
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5
3
44 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.751STE Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.522S
8.2 TE ∅3.3 RN Length 10 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 64 18/10/2017 14:55
65
Hard and soft bone drilling stops here
TE∅ 3.3 RN
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
044.751STE Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.523S
8.3 TE ∅3.3 RN Length 12 mm
040.578SAlignment Pin Set
702336-en.indd 65 18/10/2017 14:55
66
Hard and soft bone drilling stops here
TE∅ 3.3 RN
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.751STE Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
033.524S
8.4 TE ∅3.3 RN Length 14 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 66 18/10/2017 14:55
67
Hard and soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
TE∅ 4.1 RN
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 34 4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.746STE Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 033.571S
8.5 TE ∅4.1 RN Length 8 mm
5
3
6 8
5 7
7
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 67 18/10/2017 14:55
68
Hard and soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
TE∅ 4.1 RN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
334
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.746STE Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 033.572S
8.6 TE ∅4.1 RN Length 10 mm
5
3
6 8
5 7
7
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 68 18/10/2017 14:55
69
Hard and soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
TE∅ 4.1 RN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
34
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
044.746STE Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 033.573S
8.7 TE ∅4.1 RN Length 12 mm
5
3
6 8
5 7
7
040.578SAlignment Pin Set
702336-en.indd 69 18/10/2017 14:55
70
Hard and soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
TE∅ 4.1 RN
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.746STE Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 033.574S
8.8 TE ∅4.1 RN Length 14 mm
3 5 7
3
4
5 7
6 8
3
4
040.575SDrill Set Long ∅4.1 Implants
702336-en.indd 70 18/10/2017 14:55
71
Hard and soft bone drilling stops here
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
TE∅ 4.8 WN
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
044.759SBL/TE Tap ∅4.8
044.747STE Profile Drill Short ∅4.8
033.622S
8.9 TE ∅4.8 WN Length 10 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axis
3 5 7 9
4 6 8 10
800 600 400500
3
4
12
12
040.578SAlignment Pin Set
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 71 18/10/2017 14:55
72
Hard and soft bone drilling stops here
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
Max. RPM
TE∅ 4.8 WN
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.759SBL/TE Tap ∅4.8
044.747STE Profile Drill Short ∅4.8
033.623S
8.10 TE ∅4.8 WN Length 12 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axis
3 5 7 9
4 6 8 10
800 600 400500
3
4
12
12
040.573SDrill Set Short ∅4.8 Implants
702336-en.indd 72 18/10/2017 14:55
73
Hard and soft bone drilling stops here
Drill to the final preparation depth Check depth and axis
Tapping only in very hard bone
Full length
Max. RPM
TE∅ 4.8 WN
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.759SBL/TE Tap ∅4.8
044.747STE Profile Drill Short ∅4.8
033.624S
8.11 TE ∅4.8 WN Length 14 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axis
800 600 400500
12
12
9
10
3
3
4
4
5 7
6 8
040.576SDrill Set Long ∅4.8 Implants
702336-en.indd 73 18/10/2017 14:56
74
9. Straumann® Bone Level Implant Line
702336-en.indd 74 18/10/2017 14:56
75
Soft bone drilling stops here
BL∅ 3.3 NC
SLActive® 8TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5
3
4 4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
021.2308
9.1 BL ∅3.3 NC Length 8 mm
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
702336-en.indd 75 18/10/2017 14:56
76
Soft bone drilling stops here
BL∅ 3.3 NC
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5
3
44 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
021.2310
9.2 BL ∅3.3 NC Length 10 mm
040.574SDrill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
702336-en.indd 76 18/10/2017 14:56
77
Soft bone drilling stops here
BL∅ 3.3 NC
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.574SDrill Set Long ∅3.3 Implants
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
021.2312
9.3 BL ∅3.3 NC Length 12 mm
040.578SAlignment Pin Set
702336-en.indd 77 18/10/2017 14:56
78
Soft bone drilling stops here
BL∅ 3.3 NC
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 68
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0096SBL Profile Drill Long ∅3.3
044.757SBL/TE Tap ∅3.3
7
7
021.2314
9.4 BL ∅3.3 NC Length 14 mm
040.574SDrill Set Long ∅3.3 Implants
702336-en.indd 78 18/10/2017 14:56
79
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
BL∅ 4.1 RC
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 34 4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.572SDrill Set Short ∅4.1 Implants
026.0090SBL Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 021.4308
9.5 BL ∅4.1 RC Length 8 mm
5
3
6 8
5 7
7
040.578SAlignment Pin Set
702336-en.indd 79 18/10/2017 14:56
80
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
BL∅ 4.1 RC
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
334
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 021.4310
9.6 BL ∅4.1 RC Length 10 mm
5
3
6 8
5 7
7
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 80 18/10/2017 14:56
81
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
BL∅ 4.1 RC
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
34
4
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 021.4312
9.7 BL ∅4.1 RC Length 12 mm
5
3
6 8
5 7
7
040.572SDrill Set Short ∅4.1 Implants
702336-en.indd 81 18/10/2017 14:56
82
Soft bone drilling stops here
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Hard bone or very hard bone
Full length
BL∅ 4.1 RC
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 810
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300500 15 15
040.575SDrill Set Long ∅4.1 Implants
040.578SAlignment Pin Set
026.0090SBL Profile Drill Short ∅4.1
044.758S BL/TE Tap ∅4.1
9
9 021.4314
9.8 BL ∅4.1 RC Length 14 mm
3 5 7
3
4
5 7
6 8
3
4
027.0006SNeedle Drill Short ∅1.6
702336-en.indd 82 18/10/2017 14:56
83
BL∅ 4.8 RC
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
044.759SBL/TE Tap ∅4.8
026.0091SBL Profile Drill Short ∅4.8
021.6308
9.9 BL ∅4.8 RC Length 8 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
800 600 400500
34
040.578SAlignment Pin Set
040.573SDrill Set Short ∅4.8 Implants
12
12
702336-en.indd 83 18/10/2017 14:56
84
BL∅ 4.8 RC
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.759SBL/TE Tap ∅4.8
026.0091SBL Profile Drill Short ∅4.8
021.6310
9.10 BL ∅4.8 RC Length 10 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
800 600 400500
3
4
040.573SDrill Set Short ∅4.8 Implants
12
12
702336-en.indd 84 18/10/2017 14:56
85
BL∅ 4.8 RC
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
044.759SBL/TE Tap ∅4.8
026.0091SBL Profile Drill Short ∅4.8
021.6312
9.11 BL ∅4.8 RC Length 12 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
3 5 7 9
4 6 8 10
800 600 400500
34
040.573SDrill Set Short ∅4.8 Implants
040.578SAlignment Pin Set
12
12
702336-en.indd 85 18/10/2017 14:56
86
BL∅ 4.8 RC
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1017 Basic information on the surgical procedures - Straumann® Dental Implant System”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
4 6 8 10
11
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
044.759SBL/TE Tap ∅4.8
026.0091SBL Profile Drill Short ∅4.8
021.6314
9.12 BL ∅4.8 RC Length 14 mm
11
3 5 7 9
Prepare the alve-olar ridge
Mark the implanta-tion site
Profile Drill TappingFull length
Drill 6 mmCheck implant axis
Drill the implant bed to the final preparation depth Check the implant axis and preparation depth
800 600 400500
9
10
3
3
4
4
5 7
6 8
040.576SDrill Set Long ∅4.8 Implants
12
12
702336-en.indd 86 18/10/2017 14:56
87
10. Straumann® Bone Level Tapered Implant Line
702336-en.indd 87 18/10/2017 14:56
88
BLT∅ 2.9 SC
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to implant depthVery soft bone
drilling stops here
Hard bone or soft bone with dense cortex drilling stops here Very hard bone or
hard bone with dense cortex
drilling stops here
Drill 6mm, check implant axisThen drill to implant depth
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. SC Position Indicator is multi use. The above information is an extract. Refer to “NAMLIT 1133 Basic information on the surgical and prosthetic procedures for the Straumann® Bone Level Tapered Implant ∅ 2.9 mm SC”. All products not available in all countries. Please consult your local representative for more information.
22 2
2
1
1
33
3
44
4 6
6
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 800800 300 15 15
027.0007SNeedle Drill Long ∅1.6
027.0003SBLT Drill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0099SBLT Profile Drill Long ∅2.9
026.0103SBLT Tap ∅2.9
5
5 021.0010
10.1 BLT ∅2.9 SC Length 10 mm
702336-en.indd 88 18/10/2017 14:56
89
Drill to implant depthVery soft bone
drilling stops here
Hard bone or soft bone with dense cortex drilling stops here
Drill 6mm, check implant axisThen drill to implant depth
Soft bone drilling stops here
BLT∅ 2.9 SC
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Very hard bone or hard bone with
dense cortex drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. SC Position Indicator is multi use. The above information is an extract. Refer to “NAMLIT 1133 Basic information on the surgical and prosthetic procedures for the Straumann® Bone Level Tapered Implant ∅ 2.9 mm SC”. All products not available in all countries. Please consult your local representative for more information.
22
21
1
33
3
4
4
4 6
6
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 800800 300 15 15
027.0007SNeedle Drill Long ∅1.6
027.0003SBLT Drill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0099SBLT Profile Drill Long ∅2.9
026.0103SBLT Tap ∅2.9
5
5 021.0012
10.2 BLT ∅2.9 SC Length 12 mm
2
702336-en.indd 89 18/10/2017 14:56
90
Drill to implant depthVery soft bone
drilling stops here
Hard bone or soft bone with dense cortex drilling stops here
Drill 6mm, check implant axisThen drill to implant depth
Soft bone drilling stops here
BLT∅ 2.9 SC
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Very hard bone or hard bone with
dense cortex drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. SC Position Indicator is multi use. The above information is an extract. Refer to “NAMLIT 1133 Basic information on the surgical and prosthetic procedures for the Straumann® Bone Level Tapered Implant ∅ 2.9 mm SC”. All products not available in all countries. Please consult your local representative for more information.
22
2
1
1
33
3
4
4
4 6
6
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 800800 300 15 15
027.0007SNeedle Drill Long ∅1.6
027.0003SBLT Drill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0099SBLT Profile Drill Long ∅2.9
026.0103SBLT Tap ∅2.9
5
5 021.0014
10.3 BLT ∅2.9 SC Length 14 mm
2
702336-en.indd 90 18/10/2017 14:56
91
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
BLT∅ 3.3 NC
SLActive® 8TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5
3
4 4 6
4 6 8
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
027.0003SBLT Drill Set Long ∅3.3 Implants
040.578SAlignment Pin Set
026.0100SBLT Profile Drill Long ∅3.3
026.0104SBLT Tap ∅3.3
7
7
021.3308
10.4 BLT ∅3.3 NC Length 8 mm
702336-en.indd 91 18/10/2017 14:56
92
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
BLT∅ 3.3 NC
SLActive® 10TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5
3
44 6
4 6 8
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 300 15 15
027.0006SNeedle Drill Short ∅1.6
027.0003SBLT Drill Set Long ∅3.3 Implants
026.0100SBLT Profile Drill Long ∅3.3
026.0104SBLT Tap ∅3.3
7
7021.3310
10.5 BLT ∅3.3 NC Length 10 mm
040.578SAlignment Pin Set
702336-en.indd 92 18/10/2017 14:56
93
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
BLT∅ 3.3 NC
SLActive® 12TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 6 8
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0100SBLT Profile Drill Long ∅3.3
026.0104SBLT Tap ∅3.3
7
7021.3312
10.6 BLT ∅3.3 NC Length 12 mm
800 600 300 15
027.0003SBLT Drill Set Long ∅3.3 Implants
702336-en.indd 93 18/10/2017 14:56
94
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
BLT∅ 3.3 NC
SLActive® 14TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 6 8
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15
027.0006SNeedle Drill Short ∅1.6
027.0003SBLT Drill Set Long ∅3.3 Implants
026.0100SBLT Profile Drill Long ∅3.3
026.0104SBLT Tap ∅3.3
7
7021.3314
10.7 BLT ∅3.3 NC Length 14 mm
800 600 300 15
040.578SAlignment Pin Set
702336-en.indd 94 18/10/2017 14:56
95
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here BLT
∅ 3.3 NCSLActive® 16
TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 6 8
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0100SBLT Profile Drill Long ∅3.3
026.0104SBLT Tap ∅3.3
7
7021.3316
10.8 BLT ∅3.3 NC Length 16 mm
800 600 300 15
027.0003SBLT Drill Set Long ∅3.3 Implants
702336-en.indd 95 18/10/2017 14:56
96
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here BLT
∅ 3.3 NCSLActive® 18
TiZr
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5
3
4
4 6
4 6 8
8
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0100SBLT Profile Drill Long ∅3.3
026.0104SBLT Tap ∅3.3
7
7021.3318
10.9 BLT ∅3.3 NC Length 18 mm
800 600 300 15
027.0003SBLT Drill Set Long ∅3.3 Implants
702336-en.indd 96 18/10/2017 14:56
97
BLT∅ 4.1 RC
SLActive® 8TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3 3 5 74 4 6 8
10
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0094SBLT Profile Drill Short ∅4.1
026.0105SBLT Tap ∅4.1
9
9 021.5308
10.10 BLT ∅4.1 RC Length 8 mm
4 6 83 5 7
800 800 600 500
027.0001SBLT Drill Set Short ∅4.1 Implants
702336-en.indd 97 18/10/2017 14:56
98
BLT∅ 4.1 RC
SLActive® 10TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5 74
4 6 8
10
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0094SBLT Profile Drill Short ∅4.1
026.0105SBLT Tap ∅4.1
9
9 021.5310
10.11 BLT ∅4.1 RC Length 10 mm
4 6 83 5 7
800 600 500 300
027.0001SBLT Drill Set Short ∅4.1 Implants
702336-en.indd 98 18/10/2017 14:56
99
BLT∅ 4.1 RC
SLActive® 12TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 74
4 6 8
10
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0094SBLT Profile Drill Short ∅4.1
026.0105SBLT Tap ∅4.1
9
9 021.5312
10.12 BLT ∅4.1 RC Length 12 mm
4 6 83 5 7
800 600 500 300
027.0001SBLT Drill Set Short ∅4.1 Implants
702336-en.indd 99 18/10/2017 14:56
100
BLT∅ 4.1 RC
SLActive® 14TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
4
4 6 8
10
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0094SBLT Profile Drill Short ∅4.1
026.0105SBLT Tap ∅4.1
9
9 021.5314
10.13 BLT ∅4.1 RC Length 14 mm
4 6 83 5 7
800 600 500 300
027.0004SBLT Drill Set Long ∅4.1 Implants
702336-en.indd 100 18/10/2017 14:56
101
BLT∅ 4.1 RC
SLActive® 16TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 74
4 6 8
10
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0094SBLT Profile Drill Short ∅4.1
026.0105SBLT Tap ∅4.1
9
9 021.5316
10.14 BLT ∅4.1 RC Length 16 mm
4 6 83 5 7
800 600 500 300
027.0004SBLT Drill Set Long ∅4.1 Implants
702336-en.indd 101 18/10/2017 14:56
102
BLT∅ 4.1 RC
SLActive® 18TiZr
Prepare the alve-olar ridge
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth
Check depth and axis Very soft bone drilling
stops hereHard bone or dense
cortex drilling stops hereVery hard bone
drilling stops here
Soft bone drilling stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 74
4 6 8
10
10
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0094SBLT Profile Drill Short ∅4.1
026.0105SBLT Tap ∅4.1
9
9021.5318
10.15 BLT ∅4.1 RC Length 18 mm
4 6 83 5 7
027.0004SBLT Drill Set Long ∅4.1 Implants
702336-en.indd 102 18/10/2017 14:57
103
Prepare the alve-olar ridge
BLT∅ 4.8 RC
SLActive® 8TiZr
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Very soft bone drilling stops here
Hard bone or dense
cortex drilling stops here
Very hard bone drilling stops here
Soft bone drilling
stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5 7
3 7
4 4 6 8
4 6 8 12
12
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0095SBLT Profile Drill Short ∅4.8
026.0106SBLT Tap ∅4.8
11
10
10
9
11
9
021.7308
10.16 BLT ∅4.8 RC Length 8 mm
027.0002SBLT Drill Set Short ∅4.8 Implants
702336-en.indd 103 18/10/2017 14:57
104
Prepare the alve-olar ridge
BLT∅ 4.8 RC
SLActive® 10TiZr
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Very soft bone drilling stops here
Hard bone or dense
cortex drilling stops here
Very hard bone drilling stops here
Soft bone drilling
stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
33 5 7
3 7
44 6 8
4 6 8 12
12
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 300 15 15
027.0006SNeedle Drill Short ∅1.6
027.0002SBLT Drill Set Short ∅4.8 Implants
026.0095SBLT Profile Drill Short ∅4.8
026.0106SBLT Tap ∅4.8
11
10
10
911
9
021.7310
10.17 BLT ∅4.8 RC Length 10 mm
040.578SAlignment Pin Set
702336-en.indd 104 18/10/2017 14:57
105
Prepare the alve-olar ridge
BLT∅ 4.8 RC
SLActive® 12TiZr
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Drill to the final preparation depth Check depth and axis
Very soft bone drilling stops here
Hard bone or dense
cortex drilling stops here
Very hard bone drilling stops here
Soft bone drilling
stops here
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
3 7
4
4 6 8
4 6 8 12
12
5
044.762SRound Bur ∅3.1
Max. RPM
Implant placement
800 800 800 800 600 500 400 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0095SBLT Profile Drill Short ∅4.8
026.0106SBLT Tap ∅4.8
11
10
10
911
9
021.7312
10.18 BLT ∅4.8 RC Length 12 mm
027.0002SBLT Drill Set Short ∅4.8 Implants
702336-en.indd 105 18/10/2017 14:57
106
Drill to the final preparation depth Check depth and axis
Very soft bone drilling stops here
Hard bone or dense
cortex drilling stops here
Very hard bone drilling stops here
Soft bone drilling
stops here
Max. RPM
Prepare the alve-olar ridge
BLT∅ 4.8 RC
SLActive® 14TiZr
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
3 7
4
4 6 8
4 6 8 12
12
5
044.762SRound Bur ∅3.1
Implant placement
800 800 800 800 600 500 400 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0095SBLT Profile Drill Short ∅4.8
026.0106SBLT Tap ∅4.8
11
10
10
9
11
9
021.7314
10.19 BLT ∅4.8 RC Length 14 mm
027.0005SBLT Drill Set Long ∅4.8 Implants
702336-en.indd 106 18/10/2017 14:57
107
Drill to the final preparation depth Check depth and axis
Very soft bone drilling stops here
Hard bone or dense
cortex drilling stops here
Very hard bone drilling stops here
Soft bone drilling
stops here
Max. RPM
Prepare the alve-olar ridge
BLT∅ 4.8 RC
SLActive® 16TiZr
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
3 7
4
4 6 8
4 6 8 12
12
5
044.762SRound Bur ∅3.1
Implant placement
800 800 800 800 600 500 400 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0095SBLT Profile Drill Short ∅4.8
026.0106SBLT Tap ∅4.8
11
10
10
9
11
9
021.7316
10.20 BLT ∅4.8 RC Length 16 mm
027.0005SBLT Drill Set Long ∅4.8 Implants
702336-en.indd 107 18/10/2017 14:57
108
Drill to the final preparation depth Check depth and axis
Very soft bone drilling stops here
Hard bone or dense
cortex drilling stops here
Very hard bone drilling stops here
Soft bone drilling
stops here
Max. RPM
Prepare the alve-olar ridge
BLT∅ 4.8 RC
SLActive® 18TiZr
Mark the implanta-tion site
Drill 6 mmCheck implant axisDecide bone class
Do not reprocess single-patient drills. Use single-use drill stops with single-patient drills for more precise depth control. The above information is an extract. Refer to “NAMLIT 1043 Straumann® Bone Level Tapered Implant - Basic Information”. All products not available in all countries. Please consult your local representative for more information.
2
2
1
1
3
3 5 7
3 7
4
4 6 8
4 6 8 12
12
5
044.762SRound Bur ∅3.1
Implant placement
800 800 800 800 600 500 400 300 15 15
027.0006SNeedle Drill Short ∅1.6
040.578SAlignment Pin Set
026.0095SBLT Profile Drill Short ∅4.8
026.0106SBLT Tap ∅4.8
11
10
10
911
9
021.7318
10.21 BLT ∅4.8 RC Length 18 mm
027.0005SBLT Drill Set Long ∅4.8 Implants
702336-en.indd 108 18/10/2017 14:57
Notes
702336-en.indd 109 18/10/2017 14:57
Notes
702336-en.indd 110 18/10/2017 14:57
Notes
702336-en.indd 111 18/10/2017 14:57
© Straumann USA, LLC 2017. All rights reserved.Straumann® and/or other trademarks and logos from Straumann® that are mentioned herein are the trademarks or registered trademarks of Straumann Holding AG and/or its affiliates. All rights reserved.
Straumann North American HeadquartersStraumann USA, LLC60 Minuteman RoadAndover, MA 01810Phone 800/448 8168 (US) • 800/363 4024 (CA)www.straumann.us • www.straumann.ca
International HeadquartersInstitut Straumann AGPeter Merian-Weg 12CH-4002 Basel, SwitzerlandPhone +41 (0)61 965 11 11Fax +41 (0)61 965 11 01www.straumann.com
NA
MLI
T.11
54 v
170
2336
/en/
A/00
-US
10/1
7
702336-en.indd 112 18/10/2017 14:57