structural metal fabricators, inc.smftruck.com/sites/default/files/catalogs/kts_catalogue.pdf · 1...
TRANSCRIPT
1 | P a g e
Structural Metal Fabricators, Inc.
1226 Little Gap Rd. Palmerton, Pa. 18071 610-824-7000 office 610-824-7100 fax [email protected] www.smftruck.com
Keyhole Tools, Conventional Hole Tools
Training Consulting Research &
Development Manufacturing
Date: 5/8/2014 Rev, E
2 | P a g e
Thank you for your interest in KTS Inc. Our motto is “we create solutions” if you don’t see what you’re looking for, call us and we will make it! We will also create a process solution for your projects, or any specific requirements.
We can:
Qualify your technicians Do camera launches Train R & D projects Meet all reasonable delivery dates Design encapsulation molds
Our tools have one year warranty, and we will repair & rebuild tools per request.
Thank you for your business!
3 | P a g e
Leak Repairs
• Anaerbic sealant injection for low-pressure cast iron joints • Encapsulation on low-pressure cast iron joints • Encapsulation of low-pressure service tees • Steel main pin-hole leaks with handi-band clamps • Steel main pin-hole leaks with full encirclement clamps up to 2nd • Encapsulation of mechanical couplings • Plastic valve cap (faulty) replacement • Encapsulation of medium pressure joints • Encapsulation of service tees
Service Renewals
• With existing tap: steel main, w/plastic pipe and tee • With existing tap: cast iron main, w/plastic pipe and tee • Plastic mechanical tee on a plastic main • Mechanical strap-on tee on a main with a plastic service line
General Purpose Tools
• Plastic service tee installation • Steel service tee replacement • Valve box maintenance, including replacement • Underground utility location • Tracer wire attachment • Custom water tools
4 | P a g e
New Service Installations
• Plastic mechanical tee on plastic main • Steel main; new tap, with punch-it tee • Plastic main with electro fusion tee • Cast iron main; new tap • Steel main with a strap style mechanical tee; steel service • Installation of Skinner service saddle on cast iron mains • Installation of saddle tees on steel & cast iron mains
Service Cut-Offs
• Low-pressure service cutoff, steel pipe • Low-pressure service cutoff, plastic pipe • Medium pressure cutoff, steel pipe, tees with or without completion plugs, zero
blowing gas • Gas main camera inspection & infrastructure locations 2” through 12” mains • Elevated pressure cutoff & renews, tee removal & installation
Corrosion Control
• Anode attachment • Corrosion test box installations • Install encapsulation style bags • Bonding wire attachment • Corrosion protection sleeves
Field Training – we will do in-field training on the tools we sell you so your technicians are more productive more quickly!
5 | P a g e
Heavy Duty – Drive Tools & Accessories
6-Foot Drive Extension
P/N: KTS-HDD-001 Drive Tee Handle P/N: KTS-HDD-003
3-Foot Drive Extension P/N: KTS-HDD-002
Plug Wrench Kit ¾” – 2” P/N” LTS-HDD-006
Plug Wrench Insert P/N’S:
KTS-HDD-012-3/4” KTS-HDD-013-1”
KTS-HDD-014-1-1/4” KTS-HDD-015-1-1/2”
KTS-HDD-016-2”
Pipe Tee Extractor P/N’S: KTS-HDD-007-3/4” KTS-HDD-008-1” KTS-HDD-009-1-1/4” KTS-HDD-010-1-1/2” KTS-HDD-011-2”
6 | P a g e
Heavy Duty – Drive Tools & Accessories
Drive to Square dr. ¾” KTS-HDD-004 1” KTS-HDD-005
Wrench Insert Holder P/N: KTS-HDD-020
Wrench Cap Insert P/N:
KTN-HDD-017-3/4” KTS-HDD-018-1”
KTS-HDD-019-1-1/4”
Drive Tee Socket KTS-HDD-021-1”
KTS-HDD-022-1-1/4” KTS-HDD-023-1-1/2”
Socket, Perfection Tee Install
P/N KTS-PTS-001
Drive Tee Socket P/N’S:
KTS-HDD-024-3/4” KTD-HDD-025-1”
KTS-HDD-026-1-1/4” KTS-HDD-027-1-1/2”
KTS-HDD-028-2”
Extension Coupling P/N: KTS-HDD-029
7 | P a g e
Electro Fusion
Mechanical Bolt On the Tee Kit
P/N’S: KTS-MBT-001 – 2” TEE KTS-MBT-002 – 4” TEE KTS-MBT-003 – 6” TEE
Plastic Pipe Cleaner P/N’S: KTS-PPCL-001 (1-1/4”) KTS-PPCL-002 (2”)
Pipe Manipulator P/N’S” LTS-PMAN-001
Jaw P/N’S: KTS-PMH-001 – ½” KTS-PMH-002 – 5/8” KTS-PMH-003 – 7/8” KTS-PMH-004 – 1 1/8” KTS-PMH-005 – 1-1/4” KTS-PMH-006 – 2” KTS-PMH-007 – ¾”
Perfection Stab P/N’S: KTS-PMH-008 – 1-1/4” KTS-PMH-009 – 5/8” KTS-PMH-010 – 1-1/8” KTS-PMH-011 – ¾” KTS-PMH-012 – 1” KTS-PMH-013 – ½”
8 | P a g e
General & Plastic Grounding
Ratchet Beam Wrench P/N:
KTS-RAB-001 Alum KTS-RAB-002 Steel
T-Drive Lock P/N:
KTS-TDL-001
Plastic Pipe Cutter P/N:
KTS-PPS-001 Inserts KTS-PPC-002 CTS.
KTS-PPC-003 IPS ½”-2”
Open End Wrench
P/N: KTS-WAT-001 1-1/8”
KTS-WAT-002 1-3/16” KTS-WAT-003 1-3/8” KTS-WAT-004 1-1/2” KTS-WAT-005 1-5/8” KTS-WAT-006 1-3/4”
KTS-WAT-007 2” KTS-WAT-008 3-3/4”
KTS-WAT-009 2” KTS-WAT-010 1-1/4”
Grounding Tool P/N:
PTS-GT-001
Mallet Tool 6’ handle P/N:
KTS-MT-001
9 | P a g e
General, Leak, Charge
2” & 4” Handi Band attachment with Spreader
KTS-HB24-001 Use with Pipe Manipulator
Bridge Bonding Clamp KTS-BBC-001
Saddle Install Kit
KTS-SIK-001 Cadweld Charge no. 15
P/N: KTS-CWLD-001
Hex Bits KTS-HEXB-001 ¼” KTS-HEXB-002 5/16” KTS-HEXB-003 ½” KTS-HEXB-004 9/16” KTS-HEXB-005 3/8” KTS-HEXB-006 7/16” KTS-HEXB-007 5/8”
10 | P a g e
Service Renew, Terminations
Service Renew/Termination Kit KTS-SRKT-001 - Keyhole KTS-SRKT-002 - Conventional
Derivative Kits
KTS-SRKT-003-Tee Elbow removal from main
KTS-CAMERA-001 Camera Launch Kit
Steel & CI
KTS-CAMERA-002 Plastic Mains
11 | P a g e
Service Renew, Terminations
Derivative Kits
12 | P a g e
Service Renew, Terminations
Derivative Kits
13 | P a g e
Camera Kits
Camera Launch – Steel, Cast Iron, Plastic
14 | P a g e
Air Tools
Pneumatic Saw P/N: KTS-SAW -001 Long Arm KTS-SAW-002 Short Arm
Pneumatic Drill P/N: KTS-PDR-001 Long Arm KTS-PDR-002 Short Arm
Pneumatic Needle Scaler P/N: KTS-PNS-001
Pneumatic Ratchet P/N: KTS-PRAT-001 – Light Weight KTS-PRAT-002 – Heavy Duty
Pneumatic Air hammer P/N: KTS-AHAM-001
Pneumatic Impact P/N: KTS-IMPT-001
15 | P a g e
Air Tools
Pneumatic Grinder – 6” Wheels
P/N: KTS-GRIND-001
½” Wire Wheel (3 Req’d) P/N:
KTS-WWH-001
1” Unitized Wheel P/N:
KTS-WWH-001
Pneumatic Cutoff Tool P/N:L
KTS-COT-001
Pneumatic Grinder P/N:
KTS-GRIND-002 4” Wheel
KTS-WWH-002 (1 Req’d)
Air Supplier Tool P/N:
KTS-AST-001
Air Lance – Straight & Angle P/N:
KTS-AISA-001
16 | P a g e
Anearobic
1/8” Brass Pipe Plug P/N: KTS-BPP-001
“R” Drill Bit Cobalt P/N: KTS-ANER-005
Sealant Nipple P/N: KTS-ASN-001
Tap, 1/8” P/N: KTS-ATAP-001
Tube, Fill, Boot P/N: KTS-BFT-001
Socket, 7/16” Custom P/N: KTS-SCKT-001
7/16” Long Handle P/N: KTS-SKT-001
Sliding T Handle P/N: KTS-STH-001
1/8” Pipe Plug Driver P/N: KTS-PPD-001
17 | P a g e
General
Conventional Hole Pipe Scraper P/N:
KTS-LAPS-002
Sealant Injection Gun P/N:
KTS-SIG-001
Long Arm Pipe Scraper
P/N: KTS-LAPS-001
Pressure Leak Tester - Specify Tee Type P/N:
KTS-PLT-001
½” Dr 90 Deg Ig Ratchet
P/N: KTS-SWD-001
Pipe Reamer 2” P/N:
KTS-PRM-001
Air/Water Lance P/N: KTS-WAL-001
Rock Rake P/N:
KTS-RRK-001
18 | P a g e
General
Vise Wrench
P/N: KTS-VWR-001
Normac Encapsulation Kit P/N:
KTS-NEK-001
Grabbers 60”
P/N: KTS-GBR-001
Bell Joint Gasket Spade
P/N: KTS-BJGS-001
Long Finger Tool P/N:
KTS-HHK-001
19 | P a g e
General, Hydraulic Squeeze Off
Applicator Holder Attachment
P/N: KTS-APPL-001
Perfection Tee Cap P/N:
KTS-PTC-001
Chamfer Tool Holder 1-1/8 “ & 1-3/8” Continental P/N: KTS-CTH-001 Chamfer Tool Holder ½” & 1” Perfection P/N: KTS-CTH-002
Rubber Stopper 1-3/16” – 1-5/8” P/N: KTS-RST-001
20 | P a g e
Heavy Duty – Ratchet & Accessories
RATCHET ACCESSORIES
SOCKET, ELBOW REMOVERS
¾” STREET – KTS-EBWR-001 1’ STREET – KTS-EBWR-002
1-1/4” STREET – KTS-EBWR-003 1-1/2” STREET – KTS-EBWR-004
2” STREET – KTS-EBWR-005 3/4” ELBOW – KTS-EBWR-006 1” ELBOW – KTS-EBWR-007
1-1/4” ELBOW – KTS-EBWR-008 1-1/2” ELBOW– KTS-EBWR-009
2” ELBOW – KTS-EBWR-010 ¾” END CAP – KTS-SEC-075 1” END CAP– KTS-SEC-100
1-1/4” END CAP – KTS-SEC-125 1” MEULLER CAP – KTS-MRT-065
1-1/4” MUELLER CAP– KTS-MRT-066 1-1/2” MEULLER CAP – KTS-MRT-067
21 | P a g e
Custom Gear for Short Action
Heavy Hex Ratchet
P/N: KTS-HHR-002
For Conventional Hole
Heavy Hex Ratchet P/N:
KTS-HHR-001 For Keyhole
ADAPTER-SQUARE DR.
KTS-SDA-050 - 1/2” KTS-SDA-075 – ¾” KTS-SDA-100 – 1”
RETAINER-KTS-SDA-002 (These items come with KTS-HHR-001 & 002)
22 | P a g e
Cathodic Protection
Cathodic Protection Solid Shot tool – uses ca15plusf33s shot. Can use as 4 foot or add extensions for deep key holes, 8 foot.
KTS-CPT-001
Cathodic Protection – Solid Shot Kit P/N: KTS-CPT-FKIT
Includes: KTS-CPT-001 Kits, KTS-CPT-002 Shot, KTS-CASE-001 case, KTS-SPD-001 Clean Spade, KTS-BRSH-001 Brush,
KTS-MOLD-001, Furnace Angled, KTS-MOLD0002 Furnace Flat KTS-GRIND-001 Grinder, KTS-AST-001 Air Supply Tool KTS-QRT-001 Quick Release Tool, KTS-ROL-001 Roller
23 | P a g e
General
Quick Release Tool KTS-QRT-001 72” KTS-QRT-002 96” KTS-QRT-003 18”
Roller Attachment KTS-ROL-001
Mirror Attachment KTS-MIR-001
Utility Knife Attachment
KTS-UTK-001
90º Gas Tee Stopper
P/N’S: KTS-GTS90-3/4” KTS-GTS90-1”
KTS-GTS90-1/14” KTS-GTS90-1-1/2”
KTS-GTS90-2”
KIT KTS-GTS90-KIT
90º Gas Tee Stopper P/N’S:
KTS-GTSS-3/4” KTS-GTSS-1”
KTS-GTSS-1/14” KTS-GTSS-1-1/2”
KTS-GTSS-2
Kit KTS-GTSS-KIT
24 | P a g e
General
Soap Brush Attachment
KTS-SBSH-001
Sockets Central Tee’s KTS-CTS-001
Custom Sockets Per Request Pipe Mark Tool
KTS-PMT-001
Dresser Sockets
KTS-DRS-001 ¾” KTS-DRS-001 1” KTS-DRS-003 1-1/4” KTS-DRS-004 1-1/2”
Socket Cao-Continental Tee KTS-SCCT-001
Right Angle Magnet
KTS-RAM-001
25 | P a g e
Core Accessories
Core Hole Guard
KTS-CHG-001 – 12” KTS-CHG-002 – 18” KTS-CHG-003 – 24”
Cover Plates – Heavy Duty KTS-CPL-001 – 12” KTS-CPL-002 – 18” KTS-CPL-003 – 24”
Core band Shape Holder
KTS-CBSH-001 – 12” KTS-CBSH-002 – 18” KTS-CBSH-003 – 24”
Core Warming KTS-CWARM-001 – 12” KTS-CWARM-002 – 18” KTS-CWARM-003 – 24”
Core Extraction Tool KTS-CET-001 – 1-1/2: KTS-CET-002 – 2-1/4” OR Specify Size “
26 | P a g e
Core & Digging
Road Cutting Bit KTS-RCD-001 – 12” KTS-RCD-002 – 18” KTS-RCD-003 – 24”
Clay Spade KTS-CDS-001
Digging Head Assembly KTS-DHA-001
Digging Hose KTS-DHC-001 – 4” Clear KTS-DHG-002 – 4” Gray
Gas Suction Spider KTS-GSS-001
27 | P a g e
Digging, Training Stands
Heavy Duty Bar Puller Specify Size KTS-BPULLI-001
Digging Tubes KTS-ADT-001 – 5 Ft (Aluminum) KTS-ADT-002 – 6 Ft (Aluminum) KTS-ADT-003 – 7 Ft (Aluminum) KTS-PVC-001 – 5 Ft (PVC Plastic) KTS-PVC-002 – 6 Ft (PVC Plastic) KTS-PVC-003 – 7 Ft (PVS Plastic)
Sand Blaster Kit KTS-SBK-001
Nozzle, Hose, Wand, Connection
Training Stand
KTS-TSTAND-001, Single Keyhole KTS-TSTAND-002, Double Keyhole
28 | P a g e