structuralsupportcat ca 105701

7/25/2019 StructuralSupportCat CA 105701

1/156

Structural SupportSOLUTIONS

2 0 1 3 P R O D U C T C A TA L O G F I F T H E D I T I O N


2/156


3/156

Table of Contents

CommScope www.commscope.com/andrew 1

Tower Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 4G/LTE Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

GSM/PCS Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

RRU Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Microwave Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

OMNI/Directional/Broadband . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Mounting Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Coaxial Cable Support Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Monopole Applications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51 4G/LTE Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

GSM/PCS Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

RRU Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Mounting Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

OMNI/Directional/Broadband . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72 Microwave Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74


Monopoles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Concealment Poles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Wood Pole Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Roof-top Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

4G/LTE Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

GSM/PCS Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

RRU Supports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Microwave Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91


Water Tower Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103 Stackable Pod Mounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Mounting Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Coaxial Cable Support Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Waveguide Bridge Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

Waveguide Bridge Kits. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

Waveguide Bridge Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Site Related Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123 Equipment Platforms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

GPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .131

Ice Canopies. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133

Microwave Shield Mounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134

Bulk Pipe and Angle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137

Grounding Components. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138 Hardware and Fasteners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140

Engineering Ballast Formulas. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .144

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145


4/156

CommScope www.commscope.com/andrew2

Purpose-driven engineering

The Steel Group is guided by a principle we call purpose-

driven engineering. Its a holistic view of network

performance that extends beyond the individual design

specifications of a single component to consider every

product in relation to its counterparts and the potential

cumulative impact of a poorly or superbly designed antenna

system.

Its a thoughtful, deliberate approach to structural integrity that

produces components designed to endure excessive tilt, twist,

sway, vibration and harsh weather conditions.

Its a focused, sophisticated approach to the design process

that leverages the end-to-end RF Path expertise of a global

network infrastructure leader.

Its a proactive, pioneering approach to antenna support

that produces cost-effective mounts based on a deepunderstanding of how antennas behave.

Regardless of how or where we begin, the objective remains

the same: engineer outstanding antenna support systems

that provide the highest level of structural integrity for a wide

variety of mounting applications.

The benefits of advanced structural integrity

A single network represents a vast, complex collection of

interconnected devices each varying in purpose, cost,

performance and durability. Operators make purchase

decisions based on a variety of internal and external

factors, often making heavy CAPEX investments in the active

components that interpret, send and receive digital wireless

information and rightly so.

And yet, while the components at the top of the tower

deserve significant attention, they are always subject to the

structures that support them. Strut supports, antenna mounts

and cable pathways are vital in helping antennas achieve

and maintain consistent, optimum performance.

Although they may be less expensive, low-grade structural

components simply cant prevent tilt, twist, sway and

vibration. Over time, these issues inevitably lead to

under-performing antennas that create serious cost issues.CommScope solves this problem by designing, manufacturing

and delivering mounting solutions that enhance structural

integrity, optimize antenna performance and help you realize

significant, long-term OPEX savings.

Leadership by Design


5/156

CommScope www.commscope.com/andrew 3

A thoughtful, precise design ethic

At CommScope, design is the focal point but product design is

just the beginning. Our comprehensive research and testing not only

enables our products to meet industry standards it allows us to help

establish and revise the standards themselves.

As a result, our structural support solutions are designed to meet orexceed the latest EIA/TIA code requirements, conforming to both

ISO-9001 standards and AISC specifications. This proven excellence

enables network operators to:

Minimize or eliminate antenna misalignment

Utilize available spectrum more efficiently

Improve RF path integrity and overall network performance

Increase throughput and quality of service, reducing dropped calls

Mitigate customer churn and total cost of ownership

Our relationship with the Telecommunications Industry Association

(TIA) means that we are trusted to help identify and establish industry-

wide standards for antenna installation, while our partnership with the

National Association of Tower Erectors (NATE) enables us to provide

comprehensive training that teaches installers how to properly and

safely install and secure antennas.

Integrity you can rely on and the warranty to prove it

Why invest heavily in state-of-the-art antennas, only

to spend frugally on the structures they rely on for

stability, durability and precision?

CommScope believes that outstanding network

performance is the result of excellent antenna

performance. The right mounting solutions ensure

that the reliability of your supporting structures

mimics the quality of that performance well

after your initial investment.

When CommScope supplies all of your RF path

products, you enjoy a three-year RF path warranty

covering passive intermodulation (PIM), systemreturn loss and AISG operations. We stand by the

performance standards of our own rigorous tests,

providing the high-quality components you need

to improve structural integrity, enhance signal

performance, retain customers and expand your

business.

Avoid poor performance, dropped calls and high

churn rates: trust CommScope to support your

antennas, and your success, for years to come.

For more informationvisit our website at

www.commscope.com/andrewor call us at:

1-800-255-1479 (toll free) or+1-779-435-6500


6/156

CommScope www.commscope.com/andrew

Selection Guide

4

Tower Applications Monopole Applications

Site Related Components

Roof-top Applications Water Tower Applications

Waveguide Bridge Applications


7/156

4G/LTE Mounts

GSM/PCS Mounts

RRU Supports

Microwave Components

OMNI/Directional/Broadband

Mounting Components

Coaxial Cable Support Components

TowerApplications


8/156


Tower Applications

6

4G/LTE Mounts

Introducing the new SF-QV series sector frame designedspecifically for 4G LTE fiber sites.


9/156


Tower Applications

7

4G/LTE Mounts

Part Number Description Weight, lb (kg)

Pipe and U-bolts

GUB-4240 1/2" x 2-1/2" x 4" (12.7 mm x 64 mm x 0.9 (0.4)

102 mm) Galvanized U-bolt Assembly

GUB-4352 1/2" x 3" x 5-1/4" (12.7 mm x 76 mm x 0.9 (0.4)

133 mm) Galvanized U-bolt AssemblyGUB-4356 1/2" x 3-5/8" x 6" (12.7 mm x 92.1 mm x 0.9 (0.4)

152.4 mm) Galvanized U-bolt Assembly

MT-651 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 21 (9.5)

Galvanzed Pipe

MT-651-84 2-3/8" OD x 84" (60.3 mm OD x 2.1 m) 26 (11.8)

Galvanized Pipe

MT-651-96 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 33 (15.2)

Galvanized Pipe

MT-537 2-3/8" OD x 126" (60.3 mm OD x 3.2 m) 39 (18)

Galvanized Pipe

MT54672 2-7/8" OD x 72" (73 mm OD x 1.8 m) 34 (15.4)

Galvanized Pipe

MT54684 2-7/8" OD x 84" (73 mm OD x 2.1 m) 41 (18.6)

Galvanized Pipe

MT54696 2-7/8" OD x 96" (73 mm OD x 2.4 m) 46 (20.8)Galvanized Pipe

MT-546-126 2-7/8" OD x 126" (73 mm OD x 3.2 m) 61 (27.6)

Galvanized Pipe

MT54772 3-1/2" OD x 72" (88.9 mm OD x 1.8 m) 71 (32.2)

Galvanized Pipe

MT54784 3-1/2" OD x 84" (88.9 mm OD x 2.1 m) 82 (37.2)

Galvanized Pipe

MT54796 3-1/2" OD x 96" (88.9 mm OD x 2.4 m) 94 (42.6)

Galvanized Pipe

MT-547-126 3-1/2" OD x 126" (88.9 mm OD x 3.2 m) 125 (56.7)

Galvanized Pipe


Quik-Vee Stand-off Sector FramesSF-QV7-B Quik-Vee Sector Frame, 7'-6" (2.3 m) Face, 372 (168.5)

Pipes Ordered Separately

SF-QV10-B Quik-Vee Sector Frame, 10'-6" (3.2 m) Face, 397 (179.8)






Quik-Vee Stand-off Sector Frames

Application: Lattice towers

Size: 7'-6", 10'-6", 12'-6" and 14'-6" (2.3 m, 3.2 m,

3.8 m and 4.4 m) Faces

Design: Angle design, dual gated 34" (864 mm) stand-off

Feature: Quickly assembled frame with universal taper kit

Mounts to: Straight or tapered legs up to 8-5/8" OD

(219.1 mm OD), 8" (203.2 mm) angle 60, or 6"

(152.4 mm) angle 90

Material: Hot dip galvanized steel

Includes: Frame, stiff arm, saddle mount, hardware, u-bolts

for 2-3/8 (60.3 mm) OD antenna pipes

Order Separately: Pipes, u-bolts for 2-7/8 or 3-1/2(73 mm or 88.9 mm). Additional stiffarm if

required

2-7/8

(73 mm)

3-1/2

(88.9 mm)3-1/2

(88.9 mm)

2-3/8

(60.3 mm)

10 -8

(3.1 m)

34 (864 mm)

Stand-off Distance

Pivot and Taper

Adjustments

7 -6, 10 -6,

12 -6 or 14 -6

(2.3 m, 3.1 m,

3.8 m or 4.4 m)

Face Width EPA (no ice, sq ft): EPA (1/2" Escalating Ice,

100 ft. AGL, sq ft):

7'-6" Face 13.6 23.1

10'-6" Face 16.5 27.8

12'-6" Face 18.5 32.1

14'-6" Face 20.5 36.5

Man Rating:250 lb vertical man load at 15 mph (BWS)

Design Loading:Four 96 x 24 (2.4 m x .6 m) panel antennas per

sector. 750 lbs antenna and RRU per sector

Wind Rating:One stiff-arm - 90 mph per latest revision of TIA/EIA-222

at 150 AGL

Two stiff-arms - 120 mph per latest revision of TIA/EIA-222 at 150

AGL (optional)


10/156


Tower Applications

8

4G/LTE Mounts

Tower Stand-off Sector Frames


Size: 7'-6" (2.3 m) to 14'-6" (4.4 m) face

Design: Frame with 52" (1.3 m) stand-off

Feature: Angle design, dual gated 52" stand-off

Mounts to: Straight or tapered legs up to 8-5/8

(219.1 mm) OD, 8" (203.2 mm) angle 60,

or 6" (152.4 mm) angle 90


Includes: Frame, clamps and stiff arm. Pipes and saddle

mounts unless noted.

Order Separately: Pipes on -B kits

Face Width EPA (no ice, sq ft): EPA (1/2" radial ice, sq ft):

7'-6" Face 15.1 19.5

10'-6" Face 16.8 21.9

12'-6" Face 18.2 23.6

14'-6" Face 19.5 25.4


Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA-222

140 mph 3-second gust, Exposure D per FBC, at 150' AGL

*Typical installation of four 72" x 8" panel antennas per sector


Stand-off Sector Frame 7'-6" (2.3 m) Wide. Pipes Ordered SeparatelySF-SU7-B Pipes Ordered Separately 334 (151.5)

Stand-off Sector Frame 7'-6" (2.3 m) Wide. Pipes Included

SF-SU7-2-72 Two 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 380 (172.4)



Stand-off Sector Frame 10'-6" (3.1 m) Wide. Pipes Ordered Separately

SF-SU10-B Pipes Ordered Separately 353 (160.1)





SF-SU10-3-72 Three 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 423 (191.9)SF-SU10-3-96 Three 2-3/8"OD x 96"(60.3 mm OD x 2.4 m) 444 (201.4)

SF-SU10-3-126 Three 2-3/8"OD x 126"(60.3 mm OD x 3.2 m) 472 (214.1)

SF-SU10-4-72 Four 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 446 (202.3)






SF-SU12-2-72 Two 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 414 (187.8)



SF-SU12-3-72 Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 438 (198.7)

SF-SU12-3-96 Three 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 459 (208.2)SF-SU12-3-126 Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m) 487 (220.9)

SF-SU12-4-72 Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 461 (209.1)











SF-SU14-3-126 Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m) 502 (227.7)SF-SU14-4-72 Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 476 (215.9)



12-6

(3.8 m)

7-6, 10-6, 12-6, or 14-6

(2.3 m, 3.1 m, 3.8 m, or 4.4 m)

45

(1.1 m)

2-3/8 OD

(60.3 mm)

52 Stand-off Distance

(1.3 m)


11/156


Tower Applications

9

4G/LTE Mounts

SF-SU Series Mount


12/156


Tower Applications

10

4G/LTE Mounts


Universal Lattice Tower Base Kit Without Pipe MountsSF-DPM-B Dual Pipe Mount Base Kit 150 (68.0)

Universal Lattice Tower Kit With 2-3/8" OD Antenna Mounting Pipes

SF-DPM2-B Dual Pipe Mount Base Kit. Pipes Ordered Separately 215 (97.5)

SF-DPM2-72 Two 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 255 (115.7)



Universal Lattice Tower Kit With 2-7/8" (73 mm) OD Antenna Mounting

Pipes


SF-DPM3-72 Two 2-7/8" OD x 72" (73 mm OD x 1.8 m) 285 (129.3)



Universal Lattice Tower Kit With 3-1/2" (89 mm) OD Antenna Mounting

Pipes





Lattice Tower Co-location Dual Pipe Mounts


Size: 57" (1.4 m) face with 48" (1.2 m) separation

Design: Mounts off the apex of tower leg

Feature: Down-tilt capabilities


(219.1 mm OD), 8" (203.2 mm) angle 60, or 6"

(152.4 mm) angle 90


Includes: Mount, weldment, hardware

Order Separately: Available with or without pipe, struts

48

(1219.2 mm)

15.4

(390.5 mm)


13/156


Tower Applications

11

4G/LTE Mounts


Universal Lattice Tower Base Kit Without Pipe MountsSF-HPM-B Dual Pipe Mount Base Kit 140 (63.4)

Universal Lattice Tower Kit With 2-7/8" OD (73 mm OD) Pipes

SF-HPM3-B Pipes Ordered Separately 183 (83)

SF-HPM3-72 Two 2-7/8" OD x 72" (73 mm OD x 1.8 m) 252 (114)

Pipes Included

SF-HPM3-96 Two 2-7/8" OD x 96" (73 mm OD x 2.4 m) 276 (125.2)

Pipes Included

SF-HPM3-126 Two 2-7/8" OD x 126" (73 mm OD x 3.2 m) 304 (138)

Pipes Included

Universal Lattice Tower Kit With 3-1/2" OD (88.9 mm OD) Pipes

SF-HPM35-B Pipes Ordered Separately 184 (83.5)

SF-HPM35-72 Two 3-1/2" OD x 72" (88.9 mm OD x 1.8 m) 274 (124)

Pipes Included


Pipes Included


Pipes Included

Square Tube Sector Frames


Size: 66" (1.7 m) Sector face with 60" (1.5 m)

separation

Design: Square tube frame for mounting off the apex of a

tower leg

Feature: Complete one sector kit


(219.1 mm OD), 8" (203.2 mm) angle 60, or 6"

(152.4 mm) angle 90


Includes: Frames, saddle mounts, hardware, pipes

Order Separately: Available with or without pipe, struts

SF-HPM-B


14/156


Tower Applications

12

GSM/PCS Mounts

Quik-TeeSector Frame from skid to sky in minutes

Quik-TeeSector Frames


Size: 10'-6" (3.1 m) to 14'-6" (4.4 m) face

Design: Welded frame with 48" (1.2 m) stand-off

Feature: Quickly assembled, dual pivoting frame with

universal taper kit *Patent #US 7,086,207

Mounts to: Straight or tapered legs up to 8-5/8" (219.1 mm)

OD, 8" (203.2 mm) angle 60, or 6" (152.4 mm)

angle 90


Includes: Frame, clamps and stiff arm. Pipes and saddle

mounts unless noted.

Order Separately: Pipes for Base Kits, second stiff arm forincreased wind rating


Quik-TeeSector Frame 10'-6" (3.1 m) Wide. Pipes Ordered SeparatelyQT-SF10-B Pipes Ordered Separately 335.97 (152.4)

Quik-TeeSector Frame 10'-6" (3.1 m) Wide. Pipes Included

QT-SF10-2-72 Two 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 377.97 (171.4)



QT-SF10-3-72 Three 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 398.97 (181)

QT-SF10-3-96 Three 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 436.47 (198)

QT-SF10-3-126 Three 2-3/8" OD x 126" (60.3 mm OD x 3.2 m) 455.07 (206.4)

QT-SF10-4-72 Four 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 419.97 (190.5)



Quik-TeeSector Frame 12'-6" (3.8 m) Wide. Pipes Ordered Separately

QT-SF12-B Pipes Ordered Separately 350.96 (159.2)

Quik-TeeSector Frame 12'-6" (3.8 m) Wide. Pipes Included








QT-SF12-4-96 Four 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 484.96 (220)


Quik-TeeSector Frame, 14'-6" (4.4 m) Wide. Pipes Ordered Separately

QT-SF14-B Pipes Ordered Separately 370.1 (167.9)

Quik-TeeSector Frame, 14'-6" (4.4 m) Wide. Pipes Included









QT-SF14-4-126 Four 2-3/8" OD x 126" (60.3 mm OD x 3.2 m) 528.9 (239.9)Face Width EPA (no ice, sq ft): EPA (1/2" radial ice, sq ft):

10'-6" Face 13.6 17.5

12'-6" Face 16.3 20.6

14'-6" Face 17.7 22.1



at 150 AGL


Wind rating* with use of second stiff arm, (order separately)

120 mph (BWS) per latest revision of TIA/EIA-222


10 -6

(3.1 m)

Dual Pivot Points

48 Stand-off Distance

(1.2 m)

40

(1 m)

10 -6, 12 -6, or 14 -6

(3.1 m, 3.8 m, or 4.4 m)


Stiff Arm Kits, Up to 4-1/2 Tower Legs

SA-B10 Stiff Arm Bracket, With 2-3/8 OD x 10 -6 53 (24.1)(60.3 mm OD x 3.2 m) Pipe


15/156


Tower Applications

13

GSM/PCS Mounts

Universal Sector Frames


Size: 12'-6" (3.8 m) or 14'-6" (4.4 m) face

Design: Frame with 24" (0.6 m) stand-off

Feature: Superior loading with a universal design

Mounts to: Straight or tapered legs up to 8-5/8" (219.1 mm)

OD, 8" (203.2 mm) angle 60, or 6" (152.4 mm)

angle 90


Includes: Frame, clamps, stiff arm.

Pipes and saddle mounts unless noted.

Order Separately: Pipes on -B kits


12'-6" Face 10.8 15.1

14'-6" Face 11.7 16.4

Man Rating:250 lb vertical man load at 15 mph (BWS)Wind Rating*:120 mph (BWS) per latest revision of TIA/EIA-222




Universal Sector Frame 12'-6" (3.8 m) Wide. Pipes Ordered SeparatelySF-U12-B Pipes Ordered Separately 397 (180.1)

Universal Sector Frame 12'-6" (3.8 m) Wide. Pipes Included

SF-U12-3-72 Three 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 487 (220.9)



SF-U12-4-72 Four 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 517 (234.5)



Universal Sector Frame 14'-6" (4.4 m) Wide. Pipes Ordered Separately

SF-U14-B Pipes Not Included 411 (186.4)

Universal Sector Frame 14'-6" (4.4 m) Wide. Pipes Included

SF-U14-3-72 Three 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 501 (227.3)SF-U14-3-96 Three 2-3/8"OD x 96"(60.3 mm OD x 2.4 m) 523 (237.2)





2-3/8 OD

(60.3 mm)

12-6

(3.8 m)

12-6 or 14-6

(3.8 m or 4.4 m)

24

(610 mm)


16/156


Tower Applications

14

Pipe Frame Stand-off Brackets


Size: 36" (0.9 m) stand-off

Design: One-piece welded stand-off

Feature: Stands pipe frame away from tower

Mounts to: 2" to 8" (50.8 mm to 203.2 mm) OD


Includes: Stand-off and clamps

Order Separately: Tower pipe frame


Pipe Frame Stand-off Bracket for Vertical Legs, 36" (0.9 m)

PB-G3S-2 2"to 5"OD (50.8 mm to 127 mm OD) 132 (59.9)

PB-G3S-4 4"to 8"OD (101.6 mm to 203.2 mm OD) 132 (59.9)

Pipe Frame Stand-off Bracket for Tapered Legs, 36" (0.9 m)

PB-G3T-2 2"to 5"OD (50.8 mm to 127 mm OD) 138 (62.6)

PB-G3T-4 4"to 8"OD (101.6 mm to 203.2 mm OD) 138 (62.6)



140 mph 3-second gust, Exposure D per FBC, at 150 AGL

*Typical installation of three 72" x 8" panel antennas per sector

Tower Pipe Frame


Size: 10'-6" (3.1 m) or 12'-6" (3.8 m)

Design: 2-3/8" (60.3 mm) OD pipe with crossover plates

Feature: Flush or pipe mounted sector frame

Mounts to: 1-1/2" to 4-1/2" (38.1 mm to 114.3 mm) OD


Includes: Frame, pipes, stiff arm

Order Separately: Pipe frame stand-off bracket


Tower Pipe Frame, 10'-6" (3.1 m) Wide. Pipes Included

SF-TP10-3-72 Three 2-3/8"OD x 72"(60.3 mm OD x 1.8 m) 303.0 (137.4)



Tower Pipe Frame, 12'-6" (3.8 m) Wide. Pipes Included





10'-6" Face 7.27 10.5012'-6" Face 8.22 11.80


Wind Rating*: 120 mph (BWS) per latest revision of TIA/EIA-222


*Typical installation of three 72" x 8" panel antennas per sector

GSM/PCS Mounts

2-3/8 x 72, 96 or 126(60.3 mm x 1.8 m, 2.4 m or 3.2 m)

10 -6 or 12 -6(3.1 m or 3.8 m)

2-7/8 OD

(73 mm)

2-7/8 OD

(73 mm)

33

(838.2 mm)

3-1/2 OD

(88.9 mm)

56-1/2(1.4 m)


17/156


Tower Applications

15

RRU Supports


Universal RRU Face Mount Kit

RR-FM-B Tower Face Mount Brackets, 2-3/8 OD 246.24 (112)

(60.3 mm OD). Face Pipes ordered Separately

Universal RRU Face Mount Kit


Size: 2-3/8 OD (60.3 mm OD) Face pipes

Design: Face mounting

Feature: Universal taper adjustment for up to 9 of taper

with 48" (1.2 m) of separation


(219.1 mm OD), 8" (203.2 mm) angle 60, or 6"

(152.4 mm) angle 90


Includes: Universal leg brackets, 2-3/8 u-bolts

Order Separately: Face pipes, cross over plates, RRU mounting

pipes, RRUs

RR-FM-B

Mounting Bracket Detail

RR-FM-B In Use


18/156


Tower Applications

16

RRU Supports


Universal RRU Mount

PM-RU3 Mount for Attaching up to Three RRU's 67.9 (30.8)

to Straight Tower Legs

PM-RU3T Mount for Attaching up to Three RRU's to 86 (38.9)

Straight or Tapered Tower Legs

Universal RRU Mount


Design: Mounting for RRU's to tower legs or universal

pipe mounts

Feature: Mounts up to three RRU's

Mounts to: Fits tower legs up to 5-5/8" OD (143 mm OD), 6"

(152.4 mm) 60 and 8" (203.2 mm) 90 angle


Includes: Brackets and hardware

Order Separately: Pipe mount if required

19-1/2(495.3 mm)

15.7

(398.5 mm)

.563 x 4-1/2

(14.3 mm x 114.3 mm)Slots

PM-RU3


Universal Sliding Pipe Mount Kit

PM-SU35-48 Universal Sliding Pipe Mount Kit, 3-1/2" 112 (50.8)OD x 48" (88.9 mm OD x 1.2 m) Mounting Pipe



Size: 3-1/2" OD x 48" long (88.9 mm OD x 1.2 mlong)

Design: Pipe with saddle mount and adjustable clamps

Feature: Universal sliding bracket with up to 7 of taper


(219.1 mm OD), 8" (203.2 mm) angle 60, or 6"

(152.4 mm) angle 90


Includes: Universal saddle mount, sliding pipe mount

brackets, pipe

Order Separately: Universal RRU mount

PM-SU35-48

PM-RU3T


19/156


Tower Applications

17

18

(457.2 mm)

RRU Supports



RR-DPM Dual Pipe Mount for Straight or Tapered Legs 241 (109.2)



Size: 18" (457.2 mm) wide

Design: Dual pipe mount

Feature: Open face taper adjustment


(219.1 mm OD), 8" (203.2 mm) angle 60, or 6"

(152.4 mm) angle 90


Includes: Mount, taper brackets, pipe, hardware

Order Separately: RRU's

RR-DPM

Double Antenna ClampApplication: Antenna mounting

Size: 18" (457.2 mm) wide

Design: Double pipe-to-pipe clamp

Mounts to: 1-1/2" to 3-1/2" OD (38.1 mm to 88.9 mm OD)


Order Separately: 1-1/2" to 3-1/2" OD (38.1 mm to 88.9 mm OD)

pipe


Double Antenna Clamp

DA-C200 Double Antenna Clamp, Kit of 2 23 (10.4)

DA-C200

(Kit of 2)


20/156


Tower Applications

18


Universal Sliding Pipe Mount Kits

Application: Lattice towersSize: 2-3/8" or 4-1/2" OD (60.3 mm or 114.3 mm

OD)



Mounts to: Straight or tapered legs up to 16" OD (406.4 mm

OD), 16" (406.4 mm) angle 60, or 12" (304.8

mm) angle 90


Includes: Universal saddle mount, sliding pipe mount

brackets, with or without pipe

Order Separately: Pipes for base kits


at 150' AGL

*Typical installation of one 8' microwave antenna with stiff arm


Universal Sliding Pipe Mount Kits, for Round or 60 Angle Legs up to8" (203.2 mm), or 6" (152.4 mm) 90 Angle Legs, 2-3/8" (60.3 mm)

Antenna Mounting Pipe

PM-SU2-B Base Kit, Order Pipe Separately 80 (32.3)

PM-SU2-72 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 101 (45.8)

PM-SU2-96 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 114 (51.7)

Universal Sliding Pipe Mount Kits, for Round or 60 Angle Legs up to

16" (406.4 mm), or 12" (304.8 mm) 90 Angle Legs, 2-3/8" (60.3 mm)


PML-SU2-B Base Kit, Order Pipe Separately 80 (32.3)

PML-SU2-72 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 101 (45.8)

PML-SU2-96 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 114 (51.7)


8" (203.2 mm), or 6" (152.4 mm) 90 Angle Legs, 14" (355.6 mm)Stand-off, 2-3/8" (60.3 mm) Antenna Mounting Pipe

PM-SU2L-B Base Kit, Order Pipe Separately 90 (40.9)

PM-SU2L-72 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 110 (49.9)

PM-SU2L-96 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 121 (54.9)


16" (406.4 mm), or 12" (304.8 mm) 90 Angle Legs, 14" (355.6 mm)

Stand-off, 2-3/8" (60.3 mm) Antenna Mounting Pipe

PML-SU2L-B Base Kit, Order Pipe Separately 90 (40.9)

PML-SU2L-72 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 110 (49.9)




Antenna Mounting PipePM-SU4-B Base Kit, Order Pipe Separately 81 (36.8)

PM-SU4-63 4-1/2" OD x 63" (114.3 mm OD x 1.6 m) 138 (62.6)

PM-SU4-96 4-1/2" OD x 96" (114.3 mm OD x 2.4 m) 169 (76.7)




PML-SU4-B Base Kit, Order Pipe Separately 81 (36.8)

PML-SU4-63 4-1/2" OD x 63" (114.3 mm OD x 1.6 m) 138 (62.6)

PML-SU4-96 4-1/2" OD x 96" (114.3 mm OD x 2.4 m) 169 (76.7)



Stand-off 4-1/2" (114.3 mm) Antenna Mounting Pipe

PM-SU4L-B Base Kit, Order Pipe Separately 90 (40.9)PM-SU4L-63 4-1/2" OD x 63" (114.3 mm OD x 1.6 m) 145 (65.8)

PM-SU4L-96 4-1/2" OD x 96" (114.3 mm OD x 2.4 m) 175 (79.4)



Stand-off, 4-1/2" (114.3 mm) Antenna Mounting Pipe

PML-SU4L-B Base Kit, Order Pipe Separately 90 (40.9)



7-1/2" or 14(190 mm or 355.6 mm)

SLOT 4-1/2" Long(114.3 mm)

2-3/8" or 4-1/2" OD

(60.3 mm or 114.3 mm)

NOTE: Not recommendedfor use on the climbingleg of tower. Use PM-SCseries (see page 19).


21/156


Tower Applications

19

2-3/8" or 4-1/2" OD

(60.3 mm or 114.3 mm)


Universal Pipe Mount Kits

Application: Antenna leg mounting for round or angle towersSize: 2-3/8" or 4-1/2" OD (60.3 mm or 114.3

mm OD)


Feature: Designed for climbing leg


OD), 16" (406.4 mm) angle 60, or 12" (304.8

mm) angle 90


Includes: Universal saddle mount, taper adjustment

brackets, with or without pipe

Order Separately: Pipes for base kits


at 150' AGL

*Typical installation of one 8' microwave antenna with stiff arms

Part Number Description

Universal Pipe Mount Kit With Open Face Taper Adjustment, for Round or60 Angle Legs up to 8" (203.2 mm) or 6" (152.4 mm) 90 Angle Legs

PM-SC2-B Pipe Ordered Separately

PM-SC2-72 2-3/8" x 72" (60.3 mm x 1.8 m) Antenna Mounting Pipe


PM-SC4-B Pipe Ordered Separately



Universal Pipe Mount Kit With Open Face Taper Adjustment, for Round or

60 Angle Legs up to 16" (406.4 mm), or 12" (304.8 mm) 90 Angle Legs

PML-SC2-B Pipe Ordered Separately

PML-SC2-72 2-3/8" x 72" (60.3 mm x 1.8 m) Antenna Mounting Pipe

PML-SC2-96 2-3/8" x 96" (60.3 mm x 2.4 m) Antenna Mounting Pipe

PML-SC4-B Pipe Ordered Separately

PML-SC4-63 4-1/2" x 63" (114.3 mm x 1.6 m) Antenna Mounting PipePML-SC4-96 4-1/2" x 96" (114.3 mm x 2.4 m) Antenna Mounting Pipe

PM-SC2-72


22/156


Tower Applications

20


Tower Face Mounted Microwave Dish Channel Support Kit, for Round or60 Angle Legs up to 8" (203.2 mm), or 6"(152.4 mm) 90 Angle Legs

MD-CS-6R 6' (1.8 m) Plain End Pipe



Tower Face Mounted Microwave Dish Channel Support Kit, for

8" (203.2 mm) to 16" (406.4 mm) Round, or 8" (203.2 mm) to

16" (406.4 mm) 60 Angle Legs or 6" (152.4 mm) to 12" (304.8 mm)

90 Angle Legs

MDL-CS-6R 6' (1.8 m) Plain End Pipe



Tower Leg Mounted Microwave Dish Strut Support, for Round or

60 Angle Legs up to 8" (203.2 mm), or 6" (152.4 mm) 90 Angle LegsMD-SS-6R 6' (1.8 m) Pipe

MD-SS-8R 8' (2.4 m) Pipe

Tower Leg Mounted Microwave Dish Strut Support Kit, for 8" (203.2 mm)

to 16" (406.4 mm) Round, or 8" (203.2 mm) to 16" (406.4 mm)

60 Angle Legs or 6" (152.4 mm) to 12" (304.8 mm) 90 Angle Legs

MDL-SS-6R 6' (1.8 m) Pipe

MDL-SS-8R 8' (2.4 m) Pipe

Tower Leg Mounted Microwave Dish Strut Support, for Round or

60 Angle Legs up to 8" (203.2 mm), or 6" (152.4 mm) 90 Angle Legs

MD-SSA4 4' (1.2 m) Angle

MD-SSA6 6' (1.8 m) Angle

Tower Leg Mounted Microwave Dish Strut Support Kit, for 8" (203.2 mm)to 16" (406.4 mm) Round, or 8" (203.2 mm) to 16" (406.4 mm)

60 Angle Legs or 6" (152.4 mm) to 12" (304.8 mm) 90 Angle Legs

MDL-SSA4 4' (1.2 m) Angle

MDL-SSA6 6' (1.8 m) Angle

Angle for MD-CS Series

MD-CSA4 3/8" x 4" x 4" x 4'

(9.5 mm x 101.3 mm x 101.3 mm x 1.2 m)

MD-CSA6 3/8" x 4" x 4" x 6'

(9.5 mm x 101.3 mm x 101.3mm x 1.8 m)

MD-CSA8 3/8" x 4" x 4" x 8'

(9.5 mm x 101.3 mm x 101.3 mm x 2.4 m)

Microwave Dish Face Strut Support

MD-FSS Mounts to Round Legs 1-1/2 (33.6 mm) to3-1/2 (88.9 mm) in Diameter. Support is

66 (1.67 m) Long

Microwave Dish Face Stand-off Strut Support, 6 (152.4 mm)

Tower Stand-off

MD-FSST Mounts to Round Legs 1-1/2 (33.6 mm) to

3-1/2 (88.9 mm) in Diameter. Support is

66 (1.67 m) Long

Microwave Dish Support

Application: Structural strut supports for round or angle tower

legs

Size: 4', 6', 8', or 10' (1.2 m, 1.8 m, 2.4 m, or 3.1 m)

Tower faces

Design: Round or angle strut support kits

Feature: Tower face strut support kits

Mounts to: Straight or tapered legs


MD-CS-6R

MD-SSA4

MD-CSA4

MD-SS-6R

MD-FSS


MD-FSST


23/156


Tower Applications

21


USAGE MD-SSA4 MD-SSA6 MD-SSA8

Saddle Mount Attached in Center of Angle

Max. distance from

leg (d) 24" (610 mm) 36" (914.4 mm) 48" (1219.2 mm)

Acceptable Load 2000 lb (907.2 kg) 1500 lb (680.4 kg) 1000 lb (454 kg)

USAGE MD-CSA4 MD-CSA6 MD-CSA8

Angle Attached at Each End to Tower Leg Mount

Max. distance from

legs (d) 24" (610 mm) 36" (914.4 mm) 48" (1219.2 mm)

Acceptable Load 2500 lb (1134 kg) 2500 lb (1134 kg) 2000 lb (907.2 kg)

d

USAGE MD-SS-6R MD-SS-8R MD-SS-10R

Saddle Mount Attached in Center of Pipe

Max. distance fromleg (d)

36" (914.4 mm) 48" (1219.2 mm) 60" (1524 mm)

Acceptable Load 2500 lb (1134 kg) 2000 lb (907.2 kg) 1500 lb (680.4 kg)

d

USAGE MD-SS-6R MD-SS-8R MD-SS-10R

Saddle Mount Attached at One End of Pipe

Max.distance fromleg (d)

60" (1524 mm) 84" (2134 mm) 108" (2743 mm)

Acceptable Load 1500 lb (680.4 kg) 1000 lb (454 kg) 500 lb (227 kg)

d

USAGE MD-CS-6R MD-CS-8R MD-CS-10R

Pipe Attached at Each End to Tower Leg Mount

Max. distance fromlegs (d)

36" (914.4 mm) 48" (1219.2 mm) 60" (1524 mm)

Acceptable Load 2500 lb (1134 kg) 2500 lb (1134 kg) 2500 lb (1134 kg)

d

d

NOTE: It is assumed that a qualified structuralengineer has reviewed the tower structure for theloads created by the microwave antennas and strutsupports.

MD-SSA4 MD-CSA4

MD-SS-6R

MD-SS-6R

MD-CS-6R


24/156


Tower Applications

22


Microwave Dish Strut Support Bracket for Round or 60 Angle Legsup to 8" (203.2 mm), or 6" (152.4 mm) 90 Angle Legs

MD-CS Universal, for Mounting up to 3-1/2" (88.9 mm)

Face Pipes on Round or Angle Legs (Kit of 1)

MD-CSL Universal, for Mounting up to 4-1/2" (114.3 mm)


MD-CS-F Face Mounted, for Mounting up to 3-1/2" (88.9 mm)


MD-CS-B Face Mounted, (Kit of 1)

Microwave Dish Strut Support Bracket, for 8" to 16" (203.2 mm to 406.4

mm) Round, or 8" to 16" (203.2 mm to 406.4 mm) 60 Angle Legs, or 6" to

12" (152.4 mm to 304.8 mm) 90 Angle Legs

MDL-CS Universal, for Mounting up to 3-1/2" (88.9 mm)


MDL-CSL Universal, for Mounting up to 4-1/2" (114.3 mm)Face Pipes on Round or Angle Legs (Kit of 1)

MDL-CS-F Face Mounted, for Mounting up to 3-1/2" (88.9 mm)


MDL-CS-B Face Mounted, (Kit of 1)

Microwave Dish Vertical Strut Support

MD-VSS-B Microwave Dish Vertical Strut Support

Microwave Strut Attachment Bracket

TF-MSS-BK2 For 2-3/8" OD (60.3 mm OD) Pipe

TF-MSS-BK For 3-1/2" OD (88.9 mm OD) Pipe

TF-MSS-BK45 For 4-1/2" OD (114.3 mm OD) Pipe

Microwave Strut Support

Application: Structural strut supports for round or angle towerlegs

Size: 21" (533.4 mm) channel

Design: Universal support bracket

Feature: Universal strut attachment


OD), 16" (406.4 mm) angle 60, or 12" (304.8

mm) angle 90


Includes: Support bracket, attachment hardware

Order Separately: Microwave strut pipe or angle, u-bolt

MD-CS / MD-CSL

MD-CS-F

Set-up withU-bolt on Face

MD-CS-BSet up with

bolts on face

TF-MSS-BK


MD-VSS-B


25/156


Tower Applications

23

Size ft. (m) Adjustable Strut Force, lb (N) Fixed Strut Force, lb (N)

4 (1.2) 500 (2200) -

6 (1.8) 1400 (9207) -

8 (2.4) 958 (4261) 1265 (5627)

10 (3.0) 1320 (5871) 1987 (8838)

12 (3.7) 1799 (8001) 2585 (11498)

NOTE:

A 4' dish stiff arm can see in survival winds up to 600 lbs. of load, and in working load wind conditions the mount cannot flex or deflectmore than 0.1". A six foot dish stiff arm can see in survival winds up to 1400 lbs of load, and in working load wind conditions the mountcannot flex or deflect more than 0.1". In addition this arm must have a horizontal angle of less than 25 and less than 5 in the verticaldirection.

AdjustableStrut Load

+25-25

Out-BoardStrut Load

AdjustableStrut Load

+25-25

+25-25


+5

+25

-25-5

+5

-25-5

+25+5

+25

-25-5


26/156


Tower Applications

24

1 a

2 b

Key Part Number Description Page #

1 PM-SC4-63 Universal Pipe Mount Kit With Open Face 19

2 MD-VSS-B Microwave Dish Vertical Strut Support 22

3 MD-FSS Microwave Dish Face Strut Support 20

a. Open face allows safety climb to pass through

b. Strut returns back to tower at recommended anglec. Taper adjustment allows for vertical mounting solutiona

1

1

b

1

c

* Shown with Andrew PX2F series antennas and supports

b

1

a. Sliding taper brackets allow for 7 of non-incrementaladjustment

b. Strut returns straight back to tower

c. Universal saddle mounts up to 8" (203.2 mm) dia. straight or taper legs

2NOTE: If safety guide passes through mount itis recommended to add a cable guide aboveand below the mount to ensure the cable doesnot rub.


1 a

3

b


27/156


Tower Applications

25



1 PM-SC4-63 Universal Pipe Mount Kit With Open Face 19

2 PM-SU4-63 Universal Pipe Mount Kit 18

3 MD-CS-6R Tower Face Mounted Dish Strut Support Kit 20

4 MD-SS-6R Tower Leg Mounted Dish Strut Support Kit 20

5 MD-CS-B Microwave Dish Strut Support Bracket 22

6 MD-CS-F Tower Face Mounted Dish Strut Support Kit 22

7 MD-CSA6 Microwave Dish Strut Support Angle 20

8 TF-M3-8 Tower Face Mount with Dual Face Support 26

a. MD-SS-6R Provides strut support foroffset single leg attachments

b. MD-CS-B Universal strut support forround or angle legs

c. Strut returns straight back to tower atrecommended angle

d. MD-CS-F Will allow MD-CSA6 to attachto tower face with universal attachmentbrackets

c

84

c 5

e

1

b

a

6 7d

d

e. MD-CS-6R Provides strut support for the towerface with universal leg attachment brackets

* Shown with Andrew VHLP and HPX series antennas and supports

c

6 7

3

2

3

e


28/156


Tower Applications

26

16 All Thread

(406.4 mm)

4-1/2 OD x 63


(included)

(114.3 mm OD x 1.6 m)

2-3/8, 3-1/2,

or 4-1/2 OD Pipe

(60.3 mm, 88.9 mm,

or 114.3 mm OD)

8, 14, or 20 Face Pipe

(2.4 m, 4.3 m, or 6.1 m)

4

(0.1 m)

* TF-M and TFL-M Series typical applications

TF-M3-8

Tower Face Mounts

Application: Microwave antenna face mounting for round orangle, straight or tapered legs

Size: 8' (2.4 m), 14' (4.2 m), or 20' (6.1 m)

face widths

Design: Pipe with saddle mounts and adjustable clamps


with 48" of separation

Mounts to: Straight or tapered legs up to 16" (406.4 mm)

OD, 16" (406.4 mm) angle 60, or 12" (304.8

mm) angle 90


Includes: Universal saddle mounts, slider brackets, pipe,

crossover plates, hardware

Order Separately: Strut support kits, stand-off brackets


Tower Face Mount With Dual Face Supports. Includes 4-1/2" OD x 63"(114.3 mm OD x 1.6 m) Antenna Pipe up to 8" (203.2 mm) LegsTF-M2-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TF-M2-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)

TF-M2-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TF-M3-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)

TF-M3-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TF-M3-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TF-M4-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)

TF-M4-14 14' x 4-1/2" OD (4.3 m x 114.3 mm OD)

Tower Face Mount With Dual Face Supports. Includes 4-1/2" OD x 63"

(114.3 mm OD x 1.6 m) Antenna Pipe, for up to 16" (406.4 mm) LegsTFL-M2-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TFL-M2-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)

TFL-M2-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TFL-M3-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)TFL-M3-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TFL-M3-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TFL-M4-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)

TFL-M4-14 14' x 4-1/2" OD (4.3 m x 114.3 mm OD)



29/156


Tower Applications

27

NOTE: A good practice, after the path is set, is to cut theexcess stiff arm 12" past the mount point, to prevent fallingice from hitting the strut and affecting the path. Treat cut edgeper ASTM A123.

3 ft dish shown on 4 ft face tower usingTF-M2S-8 series mount.

10 ft dish shown on 20 ft facetower using TF-M3S2-20

series mount.

MicrowaveAntennaDiameter

Tower Face Mount

TF-M2-8 TF-M2-14 TF-M2-20 TF-M3-8 TF-M3-14 TF-M3-20 TF-M4-8 TF-M4-14

2' (0.6 m) X X X X X X X X

4' (1.2 m) X X X X X X X X

6' (1.8 m) X - - X X X X X

8' (2.4 m) - - - X X X X X

10' (3.1 m) - - - X X X X X

12' (3.7 m) - - - X X - X X

15' (4.6 m) - - - - - - X -


See Note Below


30/156


Tower Applications

28

TF-M3S Series


Tower Face Mount, Includes 4-1/2" OD x 63" (114.3 mm OD x 1.6 m)Antenna Pipe With One 2-3/8" x 63" (60.3 mm x 1.6 m) Strut Support

up to 8" (203.2 mm) Legs

TF-M2S-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TF-M2S-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)

TF-M2S-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TF-M3S-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)

TF-M3S-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TF-M3S-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TF-M4S-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)


(114.3 mm OD x 1.6 m) Antenna Pipe With Two 2-3/8" x 63"

(60.3 mm x 1.6 m) Strut Support up to 8" (203.2 mm) Legs

TF-M2S2-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TF-M2S2-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)TF-M2S2-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TF-M3S2-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)

TF-M3S2-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TF-M3S2-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TF-M4S2-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)

TF-M4S2-14 14' x 4-1/2" OD (4.3 m x 114.3 mm OD)

Face Mounts With Single Strut or Dual Strut Support

Application: Microwave antenna face mounting for round orangle, straight or tapered legs

Size: 8', 14', or 20' (2.4 m, 4.2 m, or 6.1 m)

Face widths

Design: Pipe with saddle mounts and adjustable clamps


with 48" (1.2 m) of separation

Mounts to: Straight or tapered legs up to 16" (406.4 mm)

OD, 16" (406.4 mm) angle 60, or 12" (304.8

mm) angle 90


Includes: Universal saddle mounts, slider brackets, pipe,

crossover plates, tieback supports, hardware

Order Separately: Stand-off brackets


TF-ML3S Series


31/156


Tower Applications

29


TF-ML4S Series


Tower Face Mount With Dual Face Supports. Includes 4-1/2" OD x 63"(114.3 mm OD x 1.6 m) Antenna Pipe With 14" (355.6 mm) Stand-off

TF-ML2-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TF-ML2-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)

TF-ML2-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TF-ML3-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)

TF-ML3-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TF-ML3-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TF-ML4-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)

TF-ML4-14 14' x 4-1/2" OD (4.3 m x 114.3 mm OD)


(114.3 mm OD x 1.6 m) Antenna Pipe With 14" (355.6 mm) Stand-off,

One 2-3/8" x 63" (60.3 mm x 1.6 m) Strut Support

TF-ML2S-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TF-ML2S-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)TF-ML2S-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TF-ML3S-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)

TF-ML3S-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TF-ML3S-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TF-ML4S-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)

TF-ML4S-14 14' x 4-1/2" OD (4.3 m x 114.3 mm OD)

TF-ML3S2 Series



(114.3 mm OD x 1.6 m) Antenna Pipe With 14" (355.6 mm)

Stand-off and Two 2-3/8" x 63" (60.3 mm x 1.6 m) Strut Support up to

8" (203.2 mm) Legs

TF-ML2S2-8 8' x 2-3/8" OD (2.4 m x 60.3 mm OD)

TF-ML2S2-14 14' x 2-3/8" OD (4.3 m x 60.3 mm OD)

TF-ML2S2-20 20' x 2-3/8" OD (6.1 m x 60.3 mm OD)

TF-ML3S2-8 8' x 3-1/2" OD (2.4 m x 88.9 mm OD)

TF-ML3S2-14 14' x 3-1/2" OD (4.3 m x 88.9 mm OD)

TF-ML3S2-20 20' x 3-1/2" OD (6.1 m x 88.9 mm OD)

TF-ML4S2-8 8' x 4-1/2" OD (2.4 m x 114.3 mm OD)

TF-ML4S2-14 14' x 4-1/2" OD (4.3 m x 114.3 mm OD)


32/156


Tower Applications

30


Tower Face Mount Strut Support Kits, 2-3/8" OD x 63" Pipe

TF-MSS-2 2-3/8" OD x 2-3/8" OD (60.3 mm x 60.3 mm) 42 (19.1)



Tower Face Mount Strut Support Kits

Application: Support for mounting strut of TF-M series face

mount

Size: Three versions

Design: Pipe with crossover plates

Feature: Can be adjusted to mount anywhere on tower

face mount

Mounts to: Tower face mount kits


Includes: Plates, strut support, hardware, pipe

Order Separately: Tower face mount kit

2-3/8 X 63 Pipe

(60.3 mm X 1.6 m)

NOTE: Supports 2500 lb. load.

TF-MSS-2



Guy Tower Face Mount With Dual Face SupportFor Up to 4 (1.2 m) Tower Face

TF-GM-4-63 4 x 2-3/8 OD (1.2 m x 60.3 mm OD) 215.52 (97.8)

Horizontal Pipes, 63 x 4-1/2 OD

(1.6 m x 114.3 mm) Antenna Mounting Pipe

TF-GM-4-96 4 x 2-3/8 OD (1.2 m x 60.3 mm OD) 245.81 (111.5)



Guy Tower Face Mount With Dual Face Support

For Up to 6 (1.8 m) Tower Face

TF-GM-6-63 6 x 2-3/8 OD (1.8 m x 60.3 mm OD) 230.05 (5843)



TF-GM-6-96 6 x 2-3/8 OD (1.8 m x 60.3 mm OD) 260.34 (6613)



Guy Tower Face Mount

Application: Guy towers

Size: 4 or 6 (1.2 m or 1.8 m) Face

Design: Pipe with crossover plates

Feature: Dual leg support

Mounts to: 2 to 5 (50.8 mm to 127 mm) OD

round members


Includes: Pipe, crossover plates, hardware

Order Separately: Strut support kits, stand-off brackets

63 or 96

(1.6 m or 2.4 m)

4 or 6

(1.2 m or 1.8 m)


33/156


Tower Applications

31


NOTE: The length of pipe must be considered for the type of dishused and the loads from the dish and or the stiff arm attached.


Tower Face Mount Stand-off BracketTF-ST 14" (355.6 mm) Stand-off 65 (29.5)

Tower Face Mount Stand-off Bracket

Application: Support for standing microwave antenna off of

TF-M series face mount

Size: 4-1/2" (114.3 mm) OD

Design: 4-1/2" (114.3 mm) OD pipe mount stand-off

Feature: 14" (355.6 mm) stand-off

Mounts to: Tower face mount kits


Includes: Stand-off, attachment hardware

Order Separately: Tower face mount kit

4-1/2 (114.3 mm)

OD Pipe Ordered

Separately

Fits 2-3/8 (60.3 mm) to 4-1/2

(114.3 mm) OD Pipe


Plain End Pipes

MT-650 2-3/8" OD x 48" (60.3 mm OD x 1.2 m) 14 (6.4)

MT-651 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 21 (9.5)

MT-651-96 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 33.5 (15.2)

MT-537 2-3/8" OD x 126" (60.3 mm OD x 3.2 m) 39.7 (18)

MT-537-170 2-3/8" OD x 170" (60.3 mm OD x 4.3 m) 52.7 (23.9)

MT-538 2-3/8" OD x 21' (60.3 mm OD x 6.4 m) 77.7 (35.2)

MT-547-48 3-1/2" OD x 48" (88.9 mm OD x 1.2 m) 46.7 (21.2)

MT-547-72 3-1/2" OD x 72" (88.9 mm OD x 1.8 m) 70 (31.8)

MT-547-96 3-1/2" OD x 96" (88.9 mm OD x 2.4 m) 93.3 (42.3)

MT-547-126 3-1/2" OD x 126" (88.9 mm OD x 3.2 m) 125 (56.7)

MT-547 3-1/2" OD x 21' (88.9 mm OD x 6.4 m) 158.8 (72.1)

MT-653-63 4-1/2" OD x 63" (114.3 mm OD x 1.6 m) 57 (25.86)

MT-654-96 4-1/2" OD x 96" (114.3 mm OD x 2.4 m) 88 (39.92)

MT 539 4-1/2" OD x 126" (114.3 mm OD x 3.2 m) 114 (51.71)

MT-654-150 4-1/2" OD x 150" (114.3 mm OD x 3.8 m) 136 (61.4)

U-bolts

GUB-4240 1/2" x 2-1/2" x 4" (12.7 mm x 63.5 mm x 0.6 (0.27)

101.6 mm) Galvanized U-bolt

GUB-4355 1/2" x 3-5/8" x 5" (12.7 mm x 92.1 mm x 0.8 (0.36)

127 mm) Galvanized U-bolt Assembly

TF-ST


34/156


Tower Applications

32


g. 6" (152.4 mm) 60 Angle tower legh. 8' (2.4 m) HSX8 series antenna and supportsi. 10' (3.0 m) Tower face

a

h g

Key Part Number Description Page #1 TF-M3-14 Tower Face Mount With 14' (4.2 m) Face Pipes 3-1/2"OD (88.9 mm) 26

2 TF-ST Tower Face Mount Stand-off Bracket 31

3 TF-MSS-3 Tower Face Mount Strut Support Kit 2-3/8" OD x 3-1/2" OD (60.3 mm x 88.9 mm) 30

i

* Shown with Andrew HSX series antennas and supports

2

d 3

2 c

1

e

3

b

a. Strut returns back to tower at recommended angle

b. Tapered legc. Channel supports adjust for inclination of tower leg taper

d. True vertical antenna support

e. Dual face support allows four-point connection to

structure

f. Optional TF-ST allows greater work space and ellipticalpath


35/156


Tower Applications

33



1 TFL-M3S2-14 Tower Face Mount Kit With 14' (4.2 m) Face Pipes 3-1/2"OD (88.9 mm) Kit Includes Two TF-MSS-3's 28

2 MDL-CS-B Microwave Dish Strut Support Bracket 22

f. 10" (254 mm) 60 Angle tapered tower legg. 10' (3 m) HP10 series antenna and supportsh. 12' (3.6 m) Tower face

ag

f

h

b

e

* Shown with Andrew HP series antennas and supports

2

c

1d

a. Strut returns back to tower at recommended angle

b. Optional strut attachment back to tower leg at recommendedangle

c. Strut attachment allows for vertical adjustment

d. Universal saddle mounts up to up to 16" (406.4 mm) ODstraight or tapered legs

e. Mount can be positioned along horizontal support for azimuthadjustment


36/156


Tower Applications

34



1 MD-IS2 Microwave Dish Cable Ice Shield 35

2 TF-M2S-8 Tower Face Mount Kit With 8' (2.4 m) Face Pipes 2-3/8" OD (60.3 mm) Kit Includes One TF-MSS-2 28

3 MD-IS4 Microwave Dish Cable Ice Shield 35

d

a

e

a. 6" (152.4 mm) 60 Tapered tower legb. Mounts to existing 4-1/2" OD (114.3 mm) vertical pipe mountc. Offers multiple attachment points on gratingd. 3' (1.0 m) Dishe. 6' (1.8 m) Tower face

a. Grating can be mounted at any azimuth to protect and follow ellipticalwaveguide

b. Threaded support rod for elliptical waveguidec. 10' (3.0 m) HP series dishd. 6" (152.4 mm) 60 Tapered tower leg

c

a

* Shown with Andrew PX2F and HP series antennas and supports

b

c

2

1

3

NOTE: A good practice, after the path is set, is to cut theexcess stiff arm 12" past the mount point, to prevent fallingice from hitting the strut and affecting the path. Treat cutedge per ASTM A123.

3

b

d


37/156


Tower Applications

35

MD-IS2

MD-WS

MD-IS4

NOTE:

It is recommended that the EW line is supported every three feet in the horizontal and within 12" of the connector so there is no stress onthe feed horn.

Microwave Dish Waveguide Shields

Application: Waveguide protection for behind microwave

antenna

Size: Three versions (see table)

Design: Support and protection for waveguide

Feature: Protects waveguide from falling debris

Mounts to: 4-1/2 (114.3 mm) OD pipe


Includes: Ice shield and all attachment hardware

Order Separately: Pipe mount


Microwave Transmission Line Shields

MD-IS2 Microwave Transmission Line Ice Shield, 42 (19.1)

12" x 24" (304.8 mm x 610 mm) Shield

MD-IS4 Microwave Transmission Line Ice Shield, 61 (27.7)

12" x 48" (304.8 mm x 1.2 m) Shield

MD-WS Microwave Waveguide Support 24 12 (5.4)

(610 mm) Angle



38/156


Tower Applications

36


Leg Mounting Solutions for SE-Series Microwave Antennas

DMHD-46 Microwave SE Mount, 4 to 6 (1.2 m to 1.8 m) 503 (227.8)

DMHD-810 Microwave SE Mount, 8 to 10 (2.4 m to 3.1 m) 557 (252.3)

DMHD-12 Microwave SE Mount, 12 (3.7 m) 598 (270)

Leg Mounting Solutions for SE-Series MicrowaveAntennas

Application: Pipe mount for mounting SE-series antenna to

round or angle tower legs

Size: Three sizes

Design: Four point mounting solution

Feature: Up to 8" of taper adjustment

Mounts to: Straight or tapered legs up to 12" OD round, 12"

angle 60 or 9" angle 90


Includes: Saddlemount, attachment hardware, struts

Order Separately: Strut brackets as needed

Microwave Antenna Strut Adjustment Bracket


Size: 2-3/8" (60.3 mm) OD

Design: Adjustable clamps

Feature: Allows for strut adjustment

Mounts to: 2-3/8" (60.3 mm) OD strut pipe


Includes: Adjustable brackets, attachment hardware

Order Separately: Microwave strut


Microwave Antenna Strut Adjustable Bracket

MD-AK-2 Microwave Antenna Strut Adjustment Bracket 16 (7.3)

for 2-3/8" OD Struts


Antenna Reflector & 4-Point Teglar Feed Radome Edge

Mount Assembly Radome Bumper Protection1.2 m (4')

Shielded 1 1

1.8 m (6')

Shielded 1 1 1 1

2.4 m (8')

Shielded 1 1 1 1

3.0 m (10')

Shielded 1 1 1 1

3.7 m (12')

Shielded 1 1 1 1

Front view of DMHD-46 shown with anSE-Series Microwave Antenna and an

MD-S6 Ice Shield

SE-Series Antennas:

Feature a wind speed rating of 320 km/h (200 mph). They also feature acorrosion resistance package. The SE-Series antennas attach to the towerinterface via four stainless steel studs instead of the standard 115 mm (4.5")OD diameter pipe.

General features for the SE-Series are listed below.


39/156


Tower Applications

37

Adapter Clamp Sets For Stand-off Brackets


Design: Adapts stand-off brackets to larger tower

members

Feature: See description

Mounts to: Tower member (See description)


Includes: Half clamps and threaded rod

Order Separately: Stand-off bracket


Adapter Clamp Set for Vertical or Tapered Tower Legs. Kit of 2

MS-SB50 4"to 9"OD (101.6 mm to 228.6 mm OD) 21 (9.5)

LS-SB50 8"to 16"OD (203.2 mm to 406.4 mm OD) 40 (18.1)

Adapter Clamp Set For Up To 6-1/2" (165.1 mm) Angle Legs. Kit of 2

AD-P60-SCP 60 Angle Legs, Also for Tapered Legs 25 (11.3)

AD-P90-SCP 90 Angle Legs, Also for Tapered Legs 25 (11.3)

Stand-off Brackets


Size: 24" (0.6 m) to 72" (1.8 m) stand-off


Feature: Ideal for omni antennas

Mounts to: Straight or tapered legs up to 3-1/2"

(88.9 mm) OD, clamps included



Order Separately: Adapter clamp sets if required


Stand-off Bracket With Antenna Mounting Pipe

S-200 24"(0.6 m) With 24" Mounting Pipe 22 (9.9)






at 150' AGL

*Typical installation of one 20' omni antenna


1-7/8 OD

(47.6 mm)

24 or 32

(610 mm or 813 mm)


40/156


Tower Applications

38


at 150' AGL

*Typical installation of one 72" x 8" panel antenna per sector

Panel Antenna Stand-off Brackets


Size: 12" to 48" (0.3 m to 1.2 m)


Feature: Solution for panel antennas

Mounts to: Tower member


Includes: Stand-off only

Order Separately: Pipe-to-pipe clamps


Panel Antenna Stand-off BracketP-100 12" (0.3 m) 42 (19.0)

P-200 24" (0.6 m) 54 (24.3)

P-300 36" (0.9 m) 62 (28.1)

P-400 48" (1.2 m) 70 (31.9)

Heavy Duty Stand-off Brackets


Size: 48" (1.2 m) or 72" (1.8 m)


Feature: Heavy duty stand-off

Mounts to: Tower member


Includes: Stand-off only

Order Separately: Pipe-to-pipe clamps and optional stiff arm


Heavy Duty Stand-off Bracket

HS-400 48" (1.2 m) Stand-off 2-3/8" OD x 42" 56 (25.3)

(60.3 mm OD x 1.1 m) Antenna Mounting Pipe

HS-600 72" (1.8 m) Stand-off 2-7/8" OD x 42" 107 (48.7)

(73 mm OD x 1.1 m) Antenna Mounting Pipe


at 150' AGL

*Typical installation of one 72" x 8" panel antenna per sector


2-3/8 OD

(60.3 mm)

52

(1.3 m)

3/4 OD(19.1 mm)

70

(1.8 m)

2-3/8 or 2-7/8 OD(60.3 mm or 73 mm)

42(1.1 m)

48 or 72(1.2 m or 1.8 m)

33

(838 mm)


41/156


Tower Applications

39

2-3/8 OD(60.3 mm)

12 -6(3.8 m)

2.875 OD Pipe

(73 mm)

24

(609.6 mm)

24

(609.6 mm)

Dish Stand-off Bracket


Size: 24" (0.6 m) stand-off


Feature: 2-7/8" (73 mm) OD pipe for microwave antennas

Mounts to: Straight or tapered legs up to 3-1/2"

(88.9 mm) OD



Order Separately: Larger clamp sets


Dish Stand-off BracketDM-100 24" (0.6 m) Stand-off Bracket 31 (14.3)

Tower Leg

Stiff Arm Kits

Application: Antenna mounting

Size: 10'-6" (3.2 m) or 12'-6" (3.8 m) long

Design: Universal adjustable, rotatable attachment

Feature: Mounts to tower members up to 8"

(203.2 mm) OD

Mounts to: Round and angle legs


Includes: Attachment hardware

Order Separately: Pipes or base kits


Stiff Arm Bracket, Pipes Ordered Separately

SA-B Stiff Arm Mount Bracket for 2-3/8" (60.3 mm) 13 (6.1)

OD Pipe, up to 4-1/2" (114.3 mm) Tower Legs

SA-BL Stiff Arm Mount Bracket for 2-3/8" (60.3 mm) 20 (9.1)

OD Pipe, up to 8" (203.2 mm) Tower Legs

SA-BU Universal Stiff Arm Mount Bracket for 1-1/4" 20 (9.1)

to 3-1/2" (31.8 mm to 88.9 mm) OD Pipe,

up to 4-1/2" (114.3 mm) Tower Legs

Stiff Arm Kits, Up to 4-1/2" Tower Legs

SA-B10 Stiff Arm Bracket, With 2-3/8 OD x 10 -6 53 (24.1)

(60.3 mm OD x 3.2 m) Pipe

SA-B12 Stiff Arm Bracket, With 2-3/8" OD x 12'-6" 60 (27.1)

(60.3 mm OD x 3.8 m) Pipe

SA-BU

SA-B12


SA-BL


42/156


Tower Applications

40

Welded Pipe-to-pipe Clamps


Design: Welded half-clamp

Feature: Heavy duty parallel connections

Mounts to: See description


Includes: Half clamps, threaded rod

Order Separately: Pipe or stand-off brackets


Welded Pipe-to-pipe Clamp, Heavy Duty. Kit of 2

BB-S10-10 Joins Two 1-1/2" OD to 3-1/2" OD 13 (5.9)

(38.1 mm OD to 88.9 mm OD) Round Members.1/2" x 10" (12.7 mm x 254.0 mm) Threaded Rod.

BB-S20-14 Joins Two 2-3/8" OD to 5" OD 27 (12.2)

(60.3 mm OD to 127.0 mm OD) Round Members.

5/8" x 14" (15.9 mm x 0.4 m) Threaded Rod.

Pipe-to-Pipe Adapters for Vertical Members. Kit of 2.

AB-S50 Adapts 1-1/2 to 3-1/2 OD 18 (8.2)

(38.1 mm to 88.9 mm OD) Pipe to

2-3/8 to 5 OD (60.3 mm to 127.0 mm OD) Pipe

MS-100 Adapts 1-1/2 to 3-1/2 OD 25 (11.3)


4 to 9 OD (101.6 mm to 228.6 mm OD) Pipe

JS-S100 Adapts 2-3/8 to 4 OD 32 (14.5)


4 to 9 OD (101.6 mm to 228.6 mm OD) PipeLS-100 Adapts 1-1/2 to 3-1/2 OD 43 (19.5)


8 to 16 OD (203.2 mm to 0.4 m OD) Pipe

LM-100 Adapts 4 to 9 OD 53 (24.1)


8 to 16 OD (203.2 mm to 0.4 m OD) Pipe


AB-S Series BB-S Series

Pipe-to-pipe Clamps


Design: Half clamps with four threaded rods each

Feature: Versatile parallel connections






Pipe-to-pipe Clamp. Kit of 2

BC-20-10D Joins Two 1-1/2 OD (38.1 mm OD) to 18 (8.2)

3-1/2 OD (88.9 mm OD) Round Members,

1/2 x 10 (12.7mm x 254mm) Threaded Rod

Heavy Duty Pipe-to-pipe Clamps

BC-30-10D Joins Two 1-1/2 OD (38.1 mm OD) to 27 (12.2)

3-1/2 OD (88.9 mm OD) Round Members,

1/2 x 10 (12.7mm x 254mm) Threaded Rod

BC-35-14D Joins Two 2-3/8 OD (60.3 mm OD) to 5 OD 51 (23.1)

(127 mm OD) Round Members, 5/8 x 14

(15.9mm x 0.4m) Threaded Rod

BC-40-16D Joins Two 4 OD (101.6 mm OD) to 9 OD 70 (31.5)

(228.6 mm OD) Round Members,5/8 x 16

(15.9mm x 0.4m) threaded rod

BC/D Series


43/156


Tower Applications

41

BC Series

Pipe-to-pipe Clamps


Design: Light-weight 1/4" half-clamp set or 1/2" heavy-

duty half-clamp sets

Feature: Versatile parallel connections






Pipe-to-pipe Clamp. Kit of 2

BC-20-10 Joins Two 1-1/2" OD to 3-1/2" OD 8 (3.6)

(38.1 mm OD to 88.9 mm OD) Round Members,

1/2" x 10" (12.7 mm x 254 mm) Threaded Rod

Pipe-to-pipe Clamp, Heavy Duty. Kit of 2

BC-30-10 Joins Two 1-1/2" OD to 3-1/2" OD 12 (5.4)

(38.1 mm OD to 88.9 mm OD) Round Members,

1/2" x 10" (12.7 mm x 254 mm) Threaded Rod

BC-35-14 Joins Two 2-3/8" OD to 5" OD (60.3 mm OD 27 (12.2)

to 127 mm OD) Round Members, 5/8" x 14"

(15.9 mm x 0.4 m) Threaded Rod

BC-40-16 Joins Two 4" OD to 9" OD (101.6 mm OD to 36 (16.3)

228.6 mm OD) Round Members, 5/8" X 16"

(15.9 mm x 0.4 m) Threaded Rod


Pipe-to-Pipe Adapters for Tapered Members. Kit of 2.

AB-S50-SSH Adapts 1-1/2" to 3-1/2" OD 28 (12.7)


2-3/8" to 5" OD to 127.0 mm OD) Pipe

MS-100-SSH Adapts 1-1/2" to 3-1/2" OD 35 (15.9)


4" to 9" OD (101.6 mm to 228.6 mm OD) Pipe

JS-S100-SSH Adapts 2-3/8" to 4" OD 40 (18.1)


4" to 9" OD (101.6 mm to 228.6 mm OD) Pipe

LS-100-SSH Adapts 1-1/2" to 3-1/2" OD 55 (24.9)


8" to 16" OD (203.2 mm to 0.4 m OD) pipe

LM-100-SSH Adapts 4" to 9" OD 66 (29.9)


8" to 16" OD (203.2 mm to 0.4 m OD) Pipe


at 150' AGL



Universal Adjustable Taper Pipe Mount

PM-AT412-60 4-1/2" OD x 60" (114.3 mm OD x 1.5 m) 125 (56.7)

Universal Adjustable Taper Pipe Mount


Size: 4-1/2" OD x 60" (114.3 mm OD x 1.5 m)

Design: Mount with pre-punched adjustment braces

Feature: Up to 20 tilt

Mounts to: Saddle mounts

Material: Hot dip galvanized steelIncludes: Pipe mount

Order Separately: Saddle mount


AB-S50 Series

4-1/2 OD (114.3 mm)

x 60 (1.5 m)

14

(355.6 mm)14-1/2

(368.3 mm)

11-7/64

(282.2 mm)

20

(508 mm)

15

(381 mm)


44/156


Tower Applications

42

Stand-off Pipe Mount


Size: 4-1/2" (114.3 mm) ODDesign: 4-1/2" (114.3 mm) OD pipe mount with stand-off

Feature: 24" (0.6 m) or 36" (0.9 m) stand-off



Includes: Pipe mount



Stand-off Pipe Mount, 4-1/2" OD x 63" (114.3 mm OD x 1.6 m)

PM-XT-24 24" (0.6 m) Stand-off 107.88 (48.93)

PM-XT-36 36" (0.9 m) Stand-off 128.45 (58.26)


at 150 AGL


Pipe Mounts


Size: 4-1/2" (114.3 mm) OD

Design: Pipe with standard or tapered welded tab

Feature: Facilitates antenna mounting



Includes: Pipe mount



Pipe Mount, 4-1/2" OD x 63" (114.3 mm OD x 1.6 m)MT-395 Standard Pipe Mount 65 (29.3)

MT-397 Tapered Pipe Mount 66 (30.0)

MT-395 MT-397

SM-U2080

Order Separately


63(1.6 m)

7(178 mm)

4-1/2 OD

(114 mm) Pipe

24 or 36

(610 mm or 914 mm)

63

(1.6 m)

4-1/2 OD

(114.3 mm)

6

(152.4 mm)


45/156


Tower Applications

43

Pipe Mount Taper Kit


Design: 3/8" (9.525 mm) flat bar steel

Feature: Accommodates 1:12 and 1:20 taper

Mounts to: Saddle mount


Includes: Plates and hardware

Order Separately: Pipe mount


PM-TK Pipe Mount Taper Kit 9 (4.2)

Mounting Components

Universal Taper Pipe Mount Slider Brackets


Size: 2-3/8" (60.3 mm) OD or 4-1/2" (114.3 mm) OD

Design: Pipe with adjustable clamps




Includes: Sliding pipe mount bracket, hardware, with or

without pipes

Order Separately: Saddle mounts or pipe for base kits


Universal Taper Pipe Mount Slider Brackets, 2-3/8" OD PipePM-SL2 Pipe Ordered Separately, Kit of 2 30 (13.6)

PM-SL2-72 2-3/8" OD x 72" (60.3 mm OD x 1.8 m) 51 (23.1)

PM-SL2-96 2-3/8" OD x 96" (60.3 mm OD x 2.4 m) 64 (28.8)

Universal Taper Pipe Mount Slider Brackets, 4-1/2" OD Pipe

PM-SL4 Pipe Ordered Separately, Kit of 2 31 (14.2)

PM-SL4-63 4-1/2" OD x 63" (114.3 mm OD x 1.6 m) 88 (40.1)

PM-SL4-96 4-1/2" OD x 96" (114.3 mm OD x 2.4 m) 119 (54.1)


at 150' AGL


8-3/8

(213 mm)

6

(152.4 mm)

5

(127 mm)

6

(152.4 mm)

7-1/2"(190 mm)

SLOT 4-1/2" Long(114.3 mm)

2-3/8" or 4-1/2" OD

(60.3 mm or 114.3 mm OD)


46/156


Tower Applications

44

Universal Saddle Mounts


Size: Three versions

Design: Two-piece formed saddle

Feature: Universal mounting design

structuralsupportcat ca 105701

Documents