students will: determine when work is being done on an object calculate the amount of work done on...
TRANSCRIPT
STUDENTS WILL:•DETERMINE WHEN WORK IS BEING
DONE ON AN OBJECT•CALCULATE THE AMOUNT OF WORK
DONE ON AN OBJECT•EXPLAIN THE DIFFERENCE BETWEEN
WORK AND POWER
Chapter 8 Section 1: Work and Power
Vocabulary
WorkJoulePowerWatt
What is Work?
The transfer of energy to an object using a force that causes the object to move in the direction of the force.
2 things need to happen for there to be work done on an object: 1. The object moves as a force is applied to it 2. The direction of the object’s motion is the same
as the direction of the force. Ex. Pushing a table across a room is an example
of work. Carrying a book across a room is NOT an
example of work because the book is not moving in the direction of the force
Transfer of Energy and Difference between force and work
Work’s “transfer of energy” is kinetic energy This is energy of motion or “moving” energy
When ever you apply a force to an object and the object moves in the direction of the force, you have done work on the object
REFER to figure 2 on page 211
HOW MUCH WORK?
Weight and distance are the 2 ways to increase the amount of work done.
Work depends upon distance as well as forceYou need the same amount of work to push a car up a hill
as to raise it up a cliff This is because work depends upon distance and force. The straight
cliff is a shorter distance but takes more force. The slope is a longer distance, but takes less force.
If you go up a slope to climb a hill, you need less force to do the work.
Formula to calculate work W= F x d Work = force times distance The unit used to express work is a joule ( symbol J )
Power: How fast work is done
Power is the rate at which energy is transferred
Watt is the unit used to express powerPower measures how fast work
happens or how quickly energy is transferred
Power output is greater when more work is done in a given amount of time and when the time it takes to do a certain amount of work is decreased
Examples
Ex 1. If you sand a shelf by hand, the energy needed is the same as if you sanded it with an electric sander. The difference between the 2 methods is the power output is lower when you sand the shelf by hand.
Ex 2. A powerful engine affects the performance of a car because a more powerful engine will move the car more quickly. For a given speed, a more powerful engine can move a heavier car than a less powerful engine can.
How to calculate power
P = W/tPower = work divided by time
Answers to Ch.8 Sec.1 Review 3. A) force times distance 4. Work is done when a force causes an object to move in the
direction of the force, and power is the rate at which work is done.
5. W = F x d = 10 N x 10 m = 100 J
6. P = W/t = 100 J / 5 s = 20 W
7. No; once the ball leaves the pitcher’s hand, work is no longer being done on the ball. The motion of the ball after that point is due to kinetic energy already given to it by the pitcher.
8. W = F x d = 50 N x 0.5 m = 25 J
No further work has been done on the chair once it has been lifted.
Monday Welcome Work
1. Work is the transfer of __________ to an object.
2. Force is expressed in SI unit called ________.
3. If you increase weight or ____________, this will increase the amount of work done.
4. For work to be done on an object, the object must move in the same direction as the ________.
5. Power measures how fast ________ is done.
Tuesday Welcome Work:1. What is the SI unit for force?2. What is the SI unit for work?3. What is the SI unit for power?4. What is the SI unit for time?5. What is the SI unit for distance?
Chapter 8 Section 2What is a machine
Students will:Explain how a machine makes
work easierDescribe and give examples of the
force-distance trade-off that occurs when a machine is used
Calculate mechanical advantageExplain why machines are not
100% efficient