styk exterior - cove · 2020. 8. 12. · p:262.242.1420 | [email protected] | last revised:...

P:262.242.1420 | [email protected] | Last Revised: 12/1/2020 | Design Rights Reserved | SEV12148 | 1 of 6

Styk Exterior - CoveSEV12148 3 in

PROJECT DETAILSJOB NAME: TYPE: NOTES:

DESCRIPTION

Styk was built to provide the most lumens with the smallest luminairepackage, while optimizing life. Not limited to decorative lighting,effective functional lighting is provided through the optimal lightcontrol in this minimal package. It's three optical offerings enabletremendous flexibility including wall washing, wall grazing, andasymmetric lighting solutions. It produces high-quality illumination toaccent and illuminate your architectural elements. Available in 1' to 8'lengths.

FEATURES & BENEFITSA forward throw optic, for even wall wash illumination, isstandard

●

Symmetrical optic options are available for more volumetricillumination

●

Lamp body can be rotated up to 330° and locks into position forprecise fixture alignment

●

Up to 1,475 lumens per foot delivered (with Forward Throwdistribution)

●

Anodized finish provides durable corrosion protection●

Handcrafted in USA●

SPECIFICATIONSLIGHT SOURCE: IP66 white LED light engine●

LUMEN MAINTENANCE: L70 = >50,000 Hrs.●

EFFICACY: 102 lm/W delivered (with Forward Throwdistribution)

●

CCT: 3000K, 3500K, or 4000K●

VOLTAGE: 120-277V standard●

DRIVER: Includes remote damp listed Class II power supply andwet location enclosure. 36" lead length standard; black powercord standard unless otherwise specified. Each module requiresconnection to a 24V constant voltage power supply; modulesover 60W may require multiple power supplies/feeds. Maxdistance to the driver is 15'. For extended distances, contactfactory.

●

DIMMING: 0-10V controls standard to 10% on LED light engines●


EMERGENCY: Emergency battery remote optional●

INTEGRATED SURGE PROTECTION: LED components areprotected against minor surge events

●

CONSTRUCTION: Extruded aluminum construction providesdurable protection for internal components and is recyclable

●

FINISH: Housing available in anodized finishes only. End capsand mounting components painted to match.

●

MODIFICATIONS: Consult factory for all modification requests,including RGB and static LED colors

●

APPROVALS: ETL listed to UL standards (US and Canada) foruse in wet locations

●

DIMENSIONS

1FT W2.9 in7.4 cm

L14.5 in36.8 cm

H2.8 in7.1 cm

Mounting Weight:Approximate: 5 lb (3 kg)

2FT W2.9 in7.4 cm

L26 in66 cm

H2.8 in7.1 cm


3FT W2.9 in7.4 cm

L38 in96.5 cm

H2.8 in7.1 cm


4FT W2.9 in7.4 cm

L50 in127 cm

H2.8 in7.1 cm


5FT W2.9 in7.4 cm

L62 in157.5 cm

H2.8 in7.1 cm


6FT W2.9 in7.4 cm

L75.8 in192.5 cm

H2.8 in7.1 cm


7FT W2.9 in7.4 cm

L87.8 in223 cm

H2.8 in7.1 cm


8FT W2.9 in7.4 cm

L99.8 in253.5 cm

H2.8 in7.1 cm



CONFIGURATORTo configure your spec sheet online, go to www.spilighting.com/SEV12148. Not all options are available in all configurations; consult factory fordetails.

Required Field *

Catalog

SEV12148Light Source* Primary Finish* Voltage* Lamp Options* Mounting* Emergency

OpticalDistribution* Options

A B C D E F G

A - LIGHT SOURCE *

To ensure color consistency, SPI uses precise bin selection and strict quality processes to maintain a 3-step (MacAdam) SDCM on all white LEDlampings. Published LED luminaire wattages are calculated using a typical power supply efficiency of 88%; exact wattages may vary based onapplication. Delivered lumens shown below are for Forward Throw distribution.

1 FOOT NOMINAL FIXTURE

1FT-L4W | White 4W LED Light Engine | Delivered Lumens: 407


1FT-L14W | White 14W LED Light Engine| Delivered Lumens: 1,424






















7FT-L27W | White 27W LED Light Engine | Delivered Lumens: 2,746




http://www.spilighting.com/SEV12148





See last page for finish options

B - VOLTAGE *

120-277V | Universal Voltage

C - LAMP OPTIONS *

Delivered lumens shown are at 4000K CCT; apply multiplier for delivered lumens at other CCT.

3000K 1 | 3000K CCT

3500K 2 | 3500K CCT

4000K | 4000K CCT

1 Apply .95 multiplier for delivered lumens2 Apply .97 multiplier for delivered lumens

D - MOUNTING *

Additional mounting structure and hardware required (by others). INSTALLATION NOTES: During installation the contractor is responsible to useactual fixtures to ensure accurate mounting centers from one fixture to the next along the length of the linear run.

DF_COV | Cove Mount (default)

E - EMERGENCY

EMR | Emergency Battery Remote

F - OPTICAL DISTRIBUTION *

See IES zip file for photometrics for each distribution.

DF_FT | Forward Throw (default)

SMA 3 | Symmetric 60 Degree Beam - 120 Degree spread

SMB 4 | Symmetric 30 Degree Beam - 60 Degree spread

3 Apply .90 multiplier to Forward Throw output shown above for delivered lumens4 Apply 1.04 multiplier to Forward Throw output shown above for delivered lumens


FT SMA SMB

G - OPTIONS

F | Fusing


Available Finishes

Not all finishes are available in all configurations; consult factory for details.

AnodizedAN04Anodized

AN08Anodized Black

styk exterior - cove · 2020. 8. 12. · p:262.242.1420 | [email protected] | last revised:...

Documents